the full range - demolition tech complete range.pdfpl2000ls/pl2000s/pl2100s pl350t pl500t pl500td...

The Full Range

Driven by innovation - committed to customer performance

75 years of innovation The art of lasting performance

From experience we know that listening to our custom-ers is the best way to get input for future development.

At Dynapac, we always strive to find new ways and better solutions. Productivity, performance, ergonomics and environmental care are prioritized areas. But most important is your satisfaction and success.

That’s why we keep spending efforts and resources on development – and on knowledge transfer. Still, after more than 75 years, the ability to take advantage of change helps us to remain pioneers.

It’s no coincidence that you see Dynapac machines at so many kinds of job sites. You’ll meet us working on airport runways, racing tracks and bridges, as well as on regular road construction projects.

Our knowledge and experience covers it all. The diversity of applications also means that we have been able to develop our routines for maintenance and service to function flawlessly in real life.

Dynapac machines perform at the top of quality standards. And at the same time they present uptime and reliability at world-class levels. Our customers benefit from this by increased productivity and by becoming more competitive.

1934 1941 1946

FACTORY ESTABLISHED IN BRAZIL

FACTORY OPENED IN KARLSKRONA, SWEDEN

1958 1960

FACTORY OPENED IN LJUNGBY, SWEDEN

FACTORY ESTABLISHED IN THE USA

AB VIBRO-BETONG FOUNDED IN STOCKHOLM, SWEDEN

This is Dynapac

Competence Center

Planer Equipment

Paver Equipment

Compactasphalt®

Asphalt Rollers

Static Rollers

Dynapac Compaction Analyzer

Soil Rollers

Light Equipment

Concrete Equipment

Dynapac Compaction Optimizer

Parts & Service

2

4

6

8

11

12

14

15

16

18

20

22

23

Dynapac is one of the world’s most specialized and experienced manufacturers of compaction and paving equipment. Our ability to present an exceptional end result is based on experience, engineering expertise, and on numerous successful innovations. Within our lean and target-oriented organization there are short and straight paths between development, manufactur-ing and our worldwide service network. No wonder that Dynapac is a winner when you compare performance, life-cycle cost and overall profitability.

Come explore the world of Dynapac.

The result is what counts

FACTORY ESTABLISHED IN CHINA

NAME CHANGED TO DYNAPAC

EXPANSION OF THE CHINESE FACTORY. NEW FACTORY ESTABLISHED IN THE USA

DYNPAC BECOMES A PART OF THE ATLAS COPCO GROUP

1973 2001 2006 2007

SwedenKarlskrona Ljungby

GermanyWardenburg Lingen

FranceSt. Valéry

IndiaNasik

ChinaTianjin

USASan Antonio

BrazilSorocaba

NEW FACTORY INAUGURATED IN INDIA

2008

NEW DISTRIBUTION CENTER IN BELGIUM AND IN THE USA

2009

3

Share our knowledge

Dynapac Campus

Dynapac Campus training academies offer high quality training courses and seminars to customers worldwide.Well trained operators and service technicians are essential in order to get the best possible result and to extend the lifetime of your equipment. We can help you achieve this.

In close cooperation with our customers, we have collected experience and knowledge for several decades. In combination with test results and research, this constitutes a solid body of competence. As an important part of our offer, all this knowledge is made available to our customers.

Our training programs include theory on materials, methods and applications, as well as practical hands-on sessions in realistic work situations.

You are guided by trained and experienced experts, and we can guarantee that you’ll find our training courses both inspiring and well worth the time and effort. Learn more at www.dynapac.com/training

A world of experience at your fingertips

competence center

D Y

N A P A

C C A M P U S

T R A I N I N G A C A D E M

Y

PaveComp will be your best friend in management of asphalt jobs. It presents recommendations on screeds, tractor units and rollers in order to to optimize the result of your specific job.

A range of asphalt mixes are included in the program, and compaction needs related to layer thickness are considered. PaveComp automatically calculates rolling

speed, frequency, amplitude and number of passes to reach the required density.

CompBase is a database containing compaction data for Dynapac rollers and light equipment on seven dif-ferent types of soil. Selecting soil type and machine will give the required number of passes and time consump-tion for the desired degree of compaction.

Hard facts in a software package

Our competence center is the hub in our support and training operations. Here we run research studies as well as full scale compaction and paving tests. In addition we provide end-user support on capacity calculations and choice of machine and method. Through collaboration with governmental bodies and academic research institutes we keep up to date with the latest developments in legislation, technologies and trends.

Dynapac Competence Center (IHCC)

Questions or comments on paving and compaction?

The support service is always open to Dynapac users. Ask us about any compaction problem at [email protected]

◄D Y

N A P A

C C A M P U S

T R A I N I N G A C A D E M

Y

Prepare for better results

Preparation sets the quality of the end result. Dynapac’s cold planers combine precision and manoeuvrability with high capacity and efficient functionality. Reduced noise, large power reserves and a strong focus on the operator’s environment and comfort have been the design cornerstones.

working width

The PL500 models are highly manoeuvrable, hydraulically powered compact planers. A quick release rear conveyor and a three- or four-wheel drive unit with traction control are significant features. The PL500 efficiently removes asphalt pavements up to a cutting depth of 160 or 200 mm at 500 mm cutting width. By the superior manoeuvrability, both models offer capacity combined with precision, even for cutting around manhole covers.

The three-wheel compact planer is ideal for partial repairs of asphalt and concrete pave-ments, as well as removing of surfaces in build-ings. Excellent manoeuvrability allows precision cutting around manhole covers; the right fold-in supporting wheel is for cost-effective cutting alongside curbs or walls. The ballast weights are removable which adds flexibility when using the PL350T inside buildings.

Compact Planer, PL350T Compact Planers, PL500T/PL500TD

planer equipment

PL2000/2100 are capable of removing as-phalt and concrete across a profiling width of 2010/2100 mm at a maximum cutting depth of 320 mm. The planers are hydrostatically driven by four steered track drives, and equipped with a front discharge conveyor system. The cutting drum is driven mechanically, by powered belts. Practical standard equipment and a range of options combined place these planers among the most capable of cold planers.

The PL1000RS is a highly manoeuvrable, hydraulically powered medium-sized planer with a quick release rear loading system. It has a mechanically driven cutting drum and a four-wheel drive unit with anti-spin control system (ASC). The planer is designed for cost effective removing of road pavements on medium and larger job sites. The cutting depth is up to 250 mm at a working width of 1000 mm.

Compact Planer, PL1000RS Large Planers, PL2000LS/PL2000S/PL2100S

◄

PL350T

PL500T

PL500TD

PL1000RS

PL2000LS

PL2000S

PL2100S

Working width (mm)

Cutting depth (mm) Engine

Rated Power (hp)

350

500

500

1 000

2 010

2 010

2 100

100

160

200

250

320

320

320

Cummins B3.3-C60

Cummins QSB 4.5-C110

Cummins QSB 4.5-C113

Cummins QSB 5.9-30-TAA

Cummins QSX 15

Cummins QSX 15

Cummins QSX 15

60

110

130

173

600

600

600

◄The operator in controlAll Dynapac planer models offer an excellent operator platform.

Compact Planers

Large Planers◄

7

Working width (mm)

Cutting depth (mm) Engine

Rated Power (hp)

Pave the way for profitability

Dynapac has a long-earned reputation of outstanding reliability, uptime and end result quality. We strongly believe that our real-life based engineering philosophy is one of the main reasons. Powerful engines, advanced traction design and precision steering are obvious highlights, and the finished surface is a powerful statement.

paver equipment

Our tracked pavers are designed for no-compromise operation. Long track drives enable maximum traction and the crawler speed is electronically, and non-incrementally, adjusted to any type of working condition. The tracks com-pensate for uneven ground level, and furthermore they are sealed and lifetime-lubricated for minimum maintenance.

Tracked paversWith a non-contacting element between transport vehi-cles and pavers, seamless and efficient finishing of any surface becomes simple and trouble-free. The asphalt mix is forwarded by a heat resistant rubber … via an au-tomatically controlled and height adjusted conveyor belt at the front of the feeder.

Wheeled pavers Mobile feedersDynapac’s wheeled pavers are truly versatile. Proven reliability from many years of operation in various ap-plications makes it the ideal choice for urban roads. The optional frontwheel drive with standard anti-spin system can be engaged and disengaged by the driver and allows the different amount of traction force required by the paver (depending on the construction site) to be adapted to the conditions of use.

MF250MF300C

Basic width (m) Max work. width (m) Rated output (kW)

Small Wheeled Pavers

1.70

1.70

2.55

2.55

2.55

2.55

2.55

2.55

2.55

2.55

2.55

Medium Wheeled Pavers

Hopper capacity (m3) Feed capacity (m3/h)Max conveyor

feed capacity (t/h)

Mobile Feeders

6

8.50

1440

3000

3000

5000F6WF6-4W

F121-WDF121-4W/DF121-6W/DF141-WDF141-4W/DF141-6W/D

F161-WF161-6WF161-8W

9

Basic width (m) Rated output (kW)

4.10

4.10

5.80

6.60

7.30

6.60

7.30

8.10

7.30

8.10

8.80

52

52

120

120

120

140

140

140

153

153

153

Basic width (m) Rated output (kW)Large Wheeled Pavers

◄

◄

◄

Max work. width (m)

Max work. width (m)

Basic width (m) Max paving width (m) Rated output (kW)

Small Tracked Pavers◄

F4C F5C F5CS F6C

F121CF141CF141CR

F181CF182CSF300CS

1.20

1.20

1.20

1.70

2.55

2.55

2.55

3

3

3

3.10

3.10

3.10

4.40

8.20

9

9

10

13.50

16

33

33

45

52

120

140

145

153

172

259

Basic width (m) Max paving width (m) Rated output (kW)Medium Tracked Pavers◄

Basic width (m) Max paving width (m) Rated output (kW)Large Tracked Pavers◄

◄

Vario ScreedsUp to 9.70 meters of paving width can be handled ef-ficiently by Dynapac’s telescopic screeds. A high degree of stability is maintained by an advanced control system for the hydraulics of the extendable sub-assemblies.

High compaction screedsThe High Compaction Screeds are designed to meet the demands for operation in either high compaction or standard mode of operation. Final compaction is performed by an additional vibratory compaction unit. This ensures an optimum degree of final compaction at every paving condition.

Fixed screedsFor the really wide paving jobs the fixed screed is a natural choice. Using a high-capacity tractor unit, the fixed screed can be used to achieve working widths of up to 16 meters. Stability and rigidity is, of course, cru-cial here and Dynapac is the safe and efficient choice.

Go wide and smoothDynapac offers a range of screeds in widths up to 16 meters. Stability is the hallmark of our screeds and the unique engineering concept offers the benefit of efficiency in combination with an outstanding surface finish. A wide range of screed types and widths makes it easy to find the perfect choice for any type of job.

screeds

Compactasphalt® – a new quality level in paving

The paving concept The combination of increased lifetime and enormous savings on top layer material makes Compactasphalt® a real winner. The required machine is a high-performance paver completed with two additional modules. The wear-ing course mix (orange) is conveyed by a mobile feeder

into a second hopper on the paver. The basic paver module can also be used for any other regular paving job. For this purpose the additional modules have to be removed. This can easily be done without using a crane.

The main advantages • Noise reduction by 6 dB(A)

(when laying open structure asphalt)

• Lower amount of mix in top layer (50% less)

• Increased life expectancy

• Better interlocking of the courses

• Higher deformation resistance

• Lower maintenance costs

◄

Increased lifetime expectancy, lower maintenance cost and significant road noise reduction. These are the mainbenefits of our latest innovation, Compactasphalt®. Two layers laid simultaneously – hot on hot – give better interlocking and higher resistance to deformation. At the same time you can save up to 50% on the top layer.

11

A full range of profit-makers

For high-speed and optimized operation, Dynapac rollers can take you the distance. A full range of vibratory and static rollers are designed to give you maximum performance, durability and versatility, and get you right to your pre-specified densities smoothly and efficiently. Over 50 years of world-leading compaction research, and 70 years of experience on the ground, mean you can depend on the most innovative compaction know-how on earth. Our extensive understanding of high-frequency applications and an internationally renowned vibratory compaction concept help to ensure the ultimate in roller precision and maneuver-ability. To keep your project rolling on time and on budget, put our knowledge to work..

asphalt rollers

When capacity counts, Dynapac’s heavy-duty line-up delivers. Airfields and wide roads and streets are the main applications for these class-leading rollers. Up to 2.13 meters of drum width and a static linear load of up to 40 kg/cm meet the toughest require-ments in high-capacity asphalt compaction.In fact, we build the heaviest asphalt roller in the world.

Small vibratory rollers

Even though primarily designed for asphalt compaction, Dynapac’s smaller rollers also perform well on base and sub-base courses. Several versions are available, dual-drum drive and vibration as well as combi rollers with a vibrating drum and four rubber wheels.

Medium-sized vibratory rollersRoads, streets and industry sites – vibratory tandem rollers in the range 7 – 9 tons act as the reliable workhorses. Outstanding performance, high precision and supreme operator comfort ensure longer stints with sustained quality.

Large vibratory tandem rollers

CC102C 2 300 1 070 10.6 0.5 57CC122C 2 430 1 200 10.5 0.5 58CC142C 3 750 1 300 14.8 0.5 52CC224CHF 7 350 1 500 25.7 0.7/0.3 48/67CC234CHF 7 800 1 500 27.0 0.5/0.2 48/67CC324CHF 7 850 1 730 22.7 0.7/0.3 50/67 CC334CHF 8 300 1 730 24.9 0.5/0.2 48/67CC424CHF 10 000 1 730 30.9 0.8/0.3 51/67CC524CHF 11 100 1 950 30.3 0.8/0.3 51/67 CA150A 7 400 1 676 22.1 0.8/0.4 45/45CA150AD 7 600 1 676 23.0 0.8/0.4 45/45

◄Operating mass (incl. ROPS) kg

Drumwidth,mm

Static linear load, kg/cm

Amplitude,mm

Frequency,Hz

CC800 1 575 800 9.5 0.4 70CC900 1 600 900 8.8 0.4 70CC900G 1 340 900 7.4 0.4 70CC900S 1 640 900 9.1 0.3/0.35 56/70CC1000 1 685 1 000 8.4 0.35 70CC102 2 350 1 070 11.0 0.5 57CC122 2 600 1 200 10.8 0.5 58CC142 3 900 1 300 15.0 0.5 52CG223HF 7 500 1 450 25.9 0.7/0.2 54/67CG233HF 8 200 1 450 28.3 0.5/0.2 54/68CG333HF 8 600 1 680 25.6 0.5/0.2 54/68CC224HF 7 700 1 500 25.7 0.7/0.3 48/67CC334HF 8 600 1 730 24.9 0.5/0.2 48/67CC234HF 8 100 1 500 27.0 0.5/0.2 48/67CC324HF 8 100 1 730 23.6 0.7/0.3 50/67CC424HF 10 500 1 730 30.9 0.8/0.3 51/67CC524HF 11 600 1 950 30.3 0.8/0.3 51/67CC624HF 12 600 2 130 30.0 0.8/0.3 51/67CC722 16 780 2 130 40.0 0.7/0.4 48/48

Operating mass (incl. ROPS) kg

Drumwidth,mm


Amplitude,mm

Frequency,Hz

◄Combination Rollers

Double Drum Vibratory Rollers

13

Dynapac offers a complete range of pneumatic tyred rollers, suited for sealing as well as as-phalt and soil compaction. 7 or 9 wheels and a rolling width of up to 2.35 meters. The Modular Ballast System, with a number of sealed ballast containers, is available on selected models.

Static rollers

Pneumatic tyred rollers

Ready, steady, go

The CS142 is the perfect choice for finish-ing passes on larger jobs and for compacting courses of up to 50 mm. It has the same static linear load on all three drums and covers 2.1 meters.

static rollers

CS142 11 000 60 2 100CS142N 10 800 59 2 100

Operating mass, kg

Static linear load, (ballasted) kg/cm

Working width, mm

◄Steel Drum Rollers

CP142 6 000 12 000/14 000 1 760CP221 8 300 21 000 1 820CP271 12 400 27 000 2 350

Operating mass, kg

Ballasted operating mass, kg

Working width, mm

◄Pneumatic Rollers

No more guesswork – Dynapac Compaction Analyzer gives the hard facts

Even compaction over the entire area and documentation of the compaction work are fundamentals of groundwork and road construction. With our tools for analysis you can monitor and document the parameters that set the standard.

The GPS-receiver provides accurate positioning of the roller

The pass-count and asphalt temperature are presented in real-time on the operator screen providing vital information for a successful compaction job.

Rear temperature sensor.Two temperature sensors constantly monitor the asphalt temperature

Compaction Analyzer - AsphaltCareful planning of the compaction passes increases quality and saves fuel. Dynapac DCA-A helps the opera-tor ensure an even number of passes over the entire area, and calculates the optimized pattern with respect to asphalt temperature. The data from the on-board computer can be transferred for further analysis and printing. For a contractor it is a clear benefit to submit clear and concise documentation of a well-performed completed job.

Compaction Analyzer - Soil

Soil compaction can be complicated. Depending on what’s underneath the base or sub-base layer, the compaction result can differ. The heart of the DCA-S is the compaction meter, which provides the Compaction Meter Value, representing the stiffness of the soil. The DCA-S with the optional DGPS-receiver provides accurate positioning to the compaction measure-ment and the information is presented to the operator in real time. At the same time DCA-S stores the information as documen-tation of the compaction process.

15

Getting the job done - on time and on budget

Superior Compaction PerformanceSoil compaction performance depends on many parameters. Static linear load, vibration characteristics and drum dimensions are just a few of them. But performance goes beyond the roller itself. Dynapac’s unique experience is available to all our customers through the software tools we offer. And by the range of programs at Dynapac Campus Training academy.

Safety is another top priority in all Dynapac products. Low center of gravity and a thorough chassis design give rock-solid stability. The fail-safe brakes and a safety switch in the operator seat reduce the risk of incidents while working. And to protect the operator you can equip all models with roll-over protection (ROPS) and protection against falling objects (FOPS).

Dynapac´s proven safety

Outstanding operator comfort

All Dynapac models offer excellent working conditions and comfort for the operator. Powerful air conditioning and logical controls, with just the right feel and feedback, completes the perfection of the operator’s environment.

A unique feature is the spin-around seat and steering module. With a full 180° movement any operation can be performed with full control and with a minimum of physical effort.

soil rollers

Single Drum Soil CompactorsCompaction is the simplest and cheapest way to increase the stability and load-bearing capacity of a soil structure. Dynapac’s single drum soil com-pactors are available in a range of sizes – up to an operating mass of 27 tons – for all types of soil compaction. High degree of visibility and the option of analysis and optimizing tools make these ma-chines ideal for the quality-conscious contractor.

Dynapac’s range of vibratory rollers are used to com-pact all types of soil with the exception of rockfill. The rollers are suitable for most types of road construc-tion, airfields, dam construction, harbour projects and industrial constructions.

Heavy-size vibratory rollers are used for a very wide range of applications. A special version with a padfoot drum is available for compacting cohesive soils.

◄Single Drum Soil Compactors

CA134D/PDCA144D/PDCA150/DCA150P/PD

1 370

1 676

1 676

1 676

1.7/1.5

1.5/1.3

1.7/0.8

1.7/0.9

35

35

31/43

31/43

Operating mass (incl.ROPS), kg

Drum width, mm


Amplitude, Hi/low,

Frequency, Hi/low, Hz

4 550/4750

4 800/5000

7000/7200

7400/7500

13 (15)*/-

12,2/-

20.9/22.1

-* with heavy front beam

Operating mass (incl.cab), kg

Drum width, mm


Amplitude, Hi/low,


CA152CA152D/PDCA182D/PD

1 676

1 676

1 676

7 300

7550/7900

8900/9000

21.8

22.4/-

30/-

1.7/0.8

1.7/0.8/ 1.7/0.9

1.9/0.9/ 1.8/0.9

31/43

31/43

31/31

CA250/DCA250P/PDCA260D/PDCA280/DCA300/D

2 130

2 130

2 130

2 130

2 130

1.7/0.8

1.6/0.8

1.7/0.8/1.6/0.8

1.7/0.8

1.7/0.8

33/33

33/33

33/33

33/33

33/33


Drum width, mm


Amplitude, Hi/low,


10600/10800

12000/12200

11300/12700

12300/12500

12300/12500

28.2/29.1

-

29.1/-

31.9/32.9

36.8/38

CA252/DCA262D/PDCA302D/PDCA362D/PDCA402D

2 130

2 130

2 130

2 130

2 130

1.7/0.8

1.7/0.8/1.6/0.8

1.7/0.8/1.6/0.8

1.7/0.8/1.6/0.8

1.7/0.8

33/33

33/33

33/33

33/33

33/33


Drum width, mm


Amplitude, Hi/low,


10240/10440

10700/12100

12700/12660

13200/13100

13 800

27.4/28.4

26.3/-

38/-

38/-

43.7

CA500D/PDCA600D/PDCA610D/PD

2 130

2 130

2 130

1.8/1.1/1.7/1.0

1.8/1.1/1.7/1.0

1.8/1.1

29/33

29/33

29/33


Drum width, mm


Amplitude, Hi/low,


15600/15800

18300/18500

20 600

49.3/-

56.3/-

66/-

CA512D/PDCA602D/PDCA612D/PDCA702D/PD

2 130

2 130

2 130

2 130

1.8/1.1/1.7/1.0

1.8/1.1/1.8/1.2

1.8/1.1/1.8/1.2

2.0/1.3

29/33

29/33

29/33

28/30


Drum width, mm


Amplitude, Hi/low,


15700/15900

18 700

20 700

26 900

49.4/-

59.9/-

66/-

81.2/-

17

Dynapac light-weight equipment ensures perfect end results in every appli-cation. Manoeuvrability, ergonomics and versatility are the hallmarks of our smaller machines. When it comes to engineering quality and cost-efficiency they share the same solid foundation of Dynapac research and experience as our other product lines.

Light-weight equipment for heavy-duty purposes

RammersDynapac’s range of rammers is designed for compacting cohesive soils, such as clay and silt but also sand and gravel. They are ideal for small repair jobs and in narrow confined areas, such as trenches or housing sites.

Forward & Reverse PlatesDynapac’s forward and reverse plates constitute an economical alternative andcompliment to a roller. Being all-round machines, they are specially designed to compact soil in confined areas.

Forward PlatesDynapac offers a full range of forward plates, specially designed for compacting asphalt and granular soils. They are ideal and economically perfect for small repair and maintenance work, such as driveways and path-ways, parking lots and backfilling in trenches.

light equipment

Asphalt

Asphalt

Duplex RollersDuplex rollers are suitable for compacting thin layers of granular soils and asphalt. They are mostly used for small jobs, repair work and compaction in confined areas. High vibration frequency and a powerful diesel engine give impressive performance with regard to the machine size.

Trench RollersThe Dynapac LP8500 roller is the perfect choice for compacting cohesive and granular soils in connection with backfills, foundation work and similar projects. With no overhang, the LP8500 is also well suited for compaction work close to walls and other obstacles.

Operating mass, kg

Plate widthmm

LF50LF60LF75LF80LF100LF130LX90

50 - 56

55 - 61

75 - 95

77 - 94

82 - 116

124 - 138

96

95 / 0.9

95 / 0.9

95 / 1.0

95 / 1.3

95 / 0.9

95 / 0.9

75 / 1.7

Frequency, HzAmplitude, mm

320

350

420/500

420

500

500

450

Forward Plates

Asphalt

AsphaltLG160LG200LG300LG500LG520LH700LH800

155 - 175

217 - 247

265 - 307

481 - 547

524

780

820

80 / 1.4

65 / 1.9

68 / 1.7

60 / 2.1

60 / 1.7

53 / 2.5

53 / 2.5

330/460

500

500

550/750/850

650

660

660

Forward and Reverse Plates

RammersOperating mass, kg

Plate widthmm

Force/blow,kN

LT500LT600LT700LT800LT5000LT6000LT7000

59/61

63/64

73

83/84

60/62

67/68

77

10

14.8

18.6

21.4

10

14.8

18.6

150/230

230/280

280

280/330

150/230

230/280

280

Duplex Rollers & Trench CompactorsOperating mass, kg

Drum widthmm


◄

◄Operating mass, kg

Plate widthmm


◄

◄

LP6500LP750LP8500

658/678

953/979

1650

61 / 0.45

63 / 0.5

31 / 1.2

650

750

850

19

Massive concrete benefits

Many of the ground-breaking innovations in concrete treatment originate from Dynapac, and as in all areas, innovation is in our blood. Reliability, sustained performance and long economical life are the fundamentals of our engineering principles. Combined with invaluable feedback from customers all over the world, this helps us to maintain our position as a leading full-range supplier.

concrete equipment

Poker vibrators Dynapac offers a wide range of poker vibrators: mechanical (pendulum), high-frequency, pneumatic, electric built-in frequency converter.

Vacuum treatment Prior to trowelling, the concrete can be treated with the Dynapac vacuum pump and suction mats vacuum treatment; a highly efficient vacuum dewatering system which reduces the water contents 20-25% and increases both compression and wear resistance. The risk of concrete shrinkage is also lessened.

Vibrating beamsVibrating beams and modular screeds have an in-depth com-paction effect on concrete slabs. Beams are double-profile elec-trically or petrol powered. Finishing beams for levelling without rails or support are also available.

Trowels From edgers to double ride-on trowels, including single trowels in petrol or electrically powered versions. Dynapac offers an ex-tensive range of trowels to fulfil all trowelling and finishing jobs.

Cutting and grinding Dynapac covers most common concrete and asphalt cutting applications with floor saw and powerful grinding machines. The floor saw comes in a petrol or diesel ver-sion completed by a series of diamond disks.

External vibrators Vibrators are available in electric versions for high,medium or low frequency, completed by a series of pneu-matic vibrators to cope with all pre-cast construction site requirements.

Submersible drainage pumps The Weda line of dewatering submersible pumps handles easily all the water you normally see on a construction site. The wear resistance, light weight and service friendliness are well-known design features. Capacities up to 20,000 lit/min and 85 m head.

Asphalt

Asphalt

Working width, m

BRBMBT90

BV20ABV21CBV30

3.25 - 10.50

3.25 - 6.25

With sections up to 15 m (electric, petrol), up to 25 m (pneumatic)

2

2

1.8 - 4.2

Electric

Petrol

Electric, petrol, pneumatic

Electric

Petrol

Petrol

Type of energy

Beams & Screeds◄

Pokers◄AsphaltDia, mm

AAAZATAYAXANSMART

25 - 75

25 - 55

29 - 59

26 - 155

40 - 65

25 - 90

25 - 65

Pendulum

Pendulum

High Cycle

Pneumatic

High Frequency

High Frequency

Electronic

Type of vibration

Submersible drainage pumps◄Max capacity

WEDA 10WEDA 30N/LWEDA 40WEDA 50N/H/LWEDA 60L/HWEDA 70L/HWEDA 90L/HWEDA 100WEDA WP300WEDA 60S sludge

16

23

20.5

42

52

72

85

41

11.5

24

Max. head, m

600 l /min

1 400 l / min

1 500 l / min

3 300 l / min

2 900 l / min

4 700 l / min

6 300 l / min

20 200 l / min

275 l / min

1 000 l / min

Rated output, kW

1.0

2.0

3.0

4.7

7.5

11.8

26.5

54

0.5

7.5

21

Optimize instead of maximize

We all know that the whole idea with compaction is to reach the correct set of parameters for the work in question. There is no point in overdoing anything – it only costs time and fuel, without improving the final result.

The Dynapac Compaction Optimizer, DCO, is an innovative system based on the well-proven compaction meter. The stiffness of the ground constitutes the input value for the setting of amplitude of the vibratory drum. The operator has full control and every aspect of the project benefits from this. Amplitude (%) Amplitude (%) Amplitude (%)

When the adjustable weight (2) is rotated so that it is in the position shown in the picture above, there is an amplitude of 50%.

When the adjustable weight (2) is rotated so that it is in the position shown in the picture above, forces balance each other out, and the resulting amplitude is 0.

When the adjustable weight (2) is rotated so that it goes to the position shown in the picture above, there is an amplitude of 100%.

Hard ground Ready compacted groundSoft ground

1

2

Amplitude Fuel consumption



(%)(mm) (%)(mm) (%)(mm)

1

2

1

2

The drum readjusts so that less dynamic energy is supplied to the ground from the drum.

The drum is reset to a minimum of vibrations.

All the dynamic energy from the drum can be absorbed by the ground.

22

Taking your business to a higher level

parts & service

Technical support – Making your daily life easier A lot of useful information is available on www.dynapac.com and through our different online support systems. Find the right parts and kits through or web-based parts system or download technical documentation through our documenta-tion system. For personal assistance, your local Dynapac representative will be supporting you.

People and organization – Our competence: your benefitThe Dynapac service organization is estab-lished in 150 countries. We have more than 2700 service technicians, continuously trained and updated on the latest product develop-ments and service methods.

Logistics and distribution – Any time, any placeDynapac is part of the global Atlas Copco distribution network. The world class logistics organization that supports our service activi-ties is unrivalled. Direct Daily Deliveries allow original parts to be delivered to your doorstep in time, wherever you are.

Dynapac Original Parts – Protect your investmentDynapac original parts are manufactured to the same high standards as your machine. The quality and life-time of your Dynapac equipment is ensured when all components are matched perfectly! For you this means reduced operating costs, fewer production stand stills, longer service life and increased resale value.

Service Contracts – Get peace of mind Available in three levels:- Inspection plan – We support you- CARE – We do it together- Total Responsibillity plan – We do it for you.

Training – From theory to practice We provide service, operator and application training close to you. See available training courses on www.dynapac.com.

At Dynapac, we know that construction and road building are competence businesses. For decades we have relentlessly collected data, information and knowledge in order to make it available to all our clients. At the end of the day it is very simple – if we can help you improve your business, you will improve ours.

At dynapac.com you will find product descriptions and technical data for all products. Do not hesitate to get in touch if you require additional information or simply want to ask us questions. Mail us or call your nearest Dynapac representative. We are convinced that there is a lot more good business to be done. Together.

visit us at dynapac.com◄

PM

I 349

2 01

29 0

1

the full range - demolition tech complete range.pdfpl2000ls/pl2000s/pl2100s pl350t pl500t pl500td...

Documents