the experts in noise & vibration measurement prosig data acquisition...
TRANSCRIPT
PROLOG
Prolog is a standalone acquisition controller and logger for use with P8000 data acquisition systems. It allows the P8000 hardware to be operated without a host computer. This makes it suitable for applications such as long term monitoring or vehicle abuse. It can also be used to remotely control P8000 systems using it Ethernet connectrion.
The initial setup for standalone mode is performed with the standard Prosig acquisition software using a laptop or PC. Once the P8000 system configuration is complete the setup can be “locked” into the Prolog unit and the PC disconnected. The Prolog controller then takes over. Buttons on the unit are used to Arm, Start, Stop and Clear the P8000 hardware. Status lights show Overrange Detection, System Loaded, System Armed and System Acquiring and Error conditions. Captured data is accessible simply using a network share via Ethernet.
Prolog can also be used to operate your P8000 hardware from a remote location using a PC or laptop. It has a Gigabit Ethernet port that allows the P8000 hardware to be controlled over a LAN, WAN or VPN. The P8000 acquisition software can control a P8000 system over USB or over Ethernet with the help of the Prolog unit without any loss of functionality.
Prosig Data Acquisition SystemTHE EXPERTS IN NOISE & VIBRATION MEASUREMENT
Standalone or Remote Data Acquisition Controller
WWW.PROSIG.COM
Contact ProsigProsig Ltd (UK)Email: [email protected]: +44 (0)1329 239925
Prosig USA IncEmail: [email protected]: +1 248 443 2470
THE EXPERTS IN NOISE & VIBRATION MEASUREMENT
SpecificationPROLOG
Find out more about the Prolog at prosig.com/p8000/prolog.html
WWW.PROSIG.COM
@prosig on Twitter
facebook.com/prosig
linkedin.com/company/prosig
youtube.com/user/TheProsig
Prolog configured from PC via Ethernet
Prolog used to control captures and store data
Standalone Operation - operate your P8000 without a laptop or PC
Setup Phase Capture Phase
Ethernet LAN, WAN or VPN
Setup and capture controlled remotely from PC via Ethernet. Data uploaded to PC via Ethernet.
Remote Operation - operate your P8000 from a remote location
SystemInternal storage Solid State Drive
Internal storage capacity: 60GB (upgradable to 512GB)External storage USB 2.0 storage devices such as USB flash drives
Network interface Gigabit (10/100/1000)Environmental
Shock and vibration Suitable for mobile use (7g rms)Operating temperature 0oC to +40oC (32oF to +104oF)
Humidity 80% RH, non-condensingWeight
GeneralSupply voltage Choice of 9-36V DC (e.g. vehicle battery) or AC
mains (adapter supplied)Dimensions†
(H x W x D) 50mm x 290mm x 270mm (2.0” x 11.4” x 9.4”)
† Dimensions are measured exclusive of any handles or other attachments