THE EV-07S PERSONAL GPS

TRACKER FROM ASTA GPS

TRACKERS

STEP BY STEP SET UP GUIDE

BY ASTA GPS TRACKERS

EV-07S PACKAGE CONTENTS

• EV-07S PERSONAL TRACKING DEVICE.

• FREE UK PAY AS YOU GO SIM.

• USB POWER CABLE.

• 3 PIN UK 13A USB CHARGING PLUG.

• LANYARD.

• USB DOCKING CHARGER.

• USER MANUAL.

EV-07S KEY FEATURES• REAL TIME TRACKING VIA FREE

ON-LINE WEB BASED TRACKING PLATFORM AND FREE SMART PHONE APPS.

• FALL DETECTION WITH INSTANT EMERGENCY MESSAGE AND CALL FUNCTION.

• 2 WAY CALLING.

• 3 PRE-SET EMERGENCY CONTACTS NUMBERS.

• INSTANT SOS ALERT SMS MESSAGE WITH GOOGLE MAPS LINK.

• GEO-FENCE PRE-SET BOUNDRIES WITH INSTANT ALERT.

• WATERPROOF TO IPX6

• THE EV-07S HAS BUILT-IN U-BLOX GPS AND GSM/GPRS TECHNOLOGY.

SETTING UP YOUR EV-07S GPS TRACKER FOR

THE FIRST TIME

• FOR THE FIRST TIME CHARGING WE RECOMMEND CHARGING FOR 2 TO 3 HOURS IN THE SUPPLIED USB CHARGING DOCK.

• PLUG THE USB LEAD IN TO THE BACK OF THE USB CHARGING DOCK AND CONNECT THE OTHER END TO A USB PORT ON YOUR PC OR LAPTOP.

• OR CONNECT USB CABLE TO THE SUPPLIED USB 13AMP 3 PIN PLUG AND CONNECT TO A POWER OUTLET.

• PLACE THE EV-07S PERSONAL GPS TRACKER IN TO THE USB CHANGING DOCK AND THE RED LED LIGHTS UP IN THE FRONT OF THE DOCKING STATION.

SWITCHING THE EV-07S GPS TRACKER

ON AND OFF

• TO TURN THE EV-07S ON:

• PRESS THE SIDE POWER BUTTON FOR 1 SECOND, ALL THE LED’S WILL FLASH RAPIDLY.

• THE EV-07S WILL TURN ON AUTOMATICALLY BY PLACING IT IN THE USB CHARGING DOCK OR CONNECTING THE USB CABLE DIRECTLY.

• TO GET AN INITIAL LOCATION, USE OUT DOORS OR NEAR A WINDOW, SO THE EV-07S MAY FIX ON TO A SATELITE.

• TO TURN OFF THE EV-07S:

• PRESS AND HOLD THE SIDE POWER BUTTON AND THE SOS BUTTON TOGETHER FOR 1 SECOND UNTILL THE LED’S TURN OFF.

WHAT DO THE LIGHTS MEAN? BLUE

LED

• BLUE LED ON - THE DEVICE IS CHARGING.

• BLUE LED BLINKING QUICKLY – BATTERY POWER IS BELOW 15%.

• BLUE LED IS OFF OR BLINKING SLOWLY – THE DEVICE HAS BEEN FULLY CHARGED OR NOT CHARGING.

WHAT DO THE LIGHTS MEAN? GSM

GREEN LED

• GREEN LED LIGHT SHOWS A SINGLE FLASH RAPIDLY EVERY 3 SECONDS –THE EV-07S IS CONNECTED TO THE GSM NETWORK.

• GREEN LED SHOWS A DOUBLE FLASH RAPIDLY EVERY 3 SECONDS – THE DEVICE IS REGISTERED TO THE GPRS NETWORK.

• GREEN LED SHOWS A SLOW FLASH EVERY 3 SECONDS – THE EV-07S IS CONNECTING TO THE GSM NETWORK.

• GREEN LED IS ON AND IS NOT FLASHING – NO SIM CARD IS DETECTED.

WHAT DO THE LIGHTS MEAN? GPS

BLUE LED

• BLUE LED SHOWS A SINGLE FLASH EVERY 3 SECONDS – THE EV-07S HAS A GPS POSITIONING FIX.

• BLUE LED SHOWS A SLOW FLASH EVERY 3 SECONDS (EVERY 1 SECOND ON AND 3 SECONDS OFF) – THE EV-07S HAS NO GPS FIX.

• BLUE LED OFF (WHEN NOT CHARGING) – THE GPS CHIP IS SLEEPING.

SETTING YOUR EV-07S DEVICE USER

NAME FOR SMS CONTENT

• TO MAKE IDENTIFYING YOUR EV-07S PERSONAL GPS TRACKING DEVICE EASIER, WE WOULD RECOMMEND ASSIGNING A USER NAME.

• TO SET DEVICE USER NAME TEXT name1, FOLLOWED BY THE NAME YOU WOULD LIKE TO SET.

• FOR EXAMPLE - YOU HAVE GIVEN THE EV-07S TO YOUR MUM AS SHE LIVES ON HER OWN. SEND A TEXT MESSAGE TO THE EV-07S DEVICE WITH name1,mum AND HIT SEND.

• THE EV-07S WILL THEN REPLY WITH A TEXT MESSAGE STATING “add name ok!”

• TO DELETE THE ASSIGNED NAME TEXT name0 TO THE EV-07S.

EV-07S CONFIGURATION AND

OPERATION BY SMS

• 1. TO SET THE AUTHORIZED NUMBERS – NOTE: IT IS NOT NESSESSARY TO SET ALL THREE AURTHORIZED NUMBERS, HOWEVER A MINIMUM OF ONE MUST ALWAYS BE SET.

• OPEN THE TEXT MESSAGING ON YOUR PHONE AND SELECT THE EV-07S GPS TRACKER FROM YOUR LIST OF CONTACTS (AMY SOS) AND SELECT CREATE TEXT MESSAGE.

• TO SET THE PRIMARY CONTACT TYPE A1, FOLLOWED BY THE PRIMARY CONTACT NUMBER. A1,0161222888 WITH NO SPACES AND SELECT SEND MESSAGE. YOU WILL THEN RECEIVE A TEXT REPLY STATING SET MOBILE NUMBER 1 OK!

• TO DELETE THE PRIMARY NUMBER, YOU CAN SEND A TEXT MESSAGE TO YOUR EV-07S BY TEXTING A0.

• A1, PLUS PHONE NUMBER TO ADD AND A0 TO DELETE.

EV-07S CONFIGURATION AND

OPERATION BY SMS

• THE SAME PROCESS IS CARRIED OUT FOR THE REMAINING AUTHERIZED CONTACTS BY CHANGING THE PRE-FIX AS FOLLOWS.

• B1,0161222888 FOR CONTACT 2.

• C1,0161222888 FOR CONTACT 3.

• REMEMBER YOU CAN DELETE ANY OF THE AUTHERIZED CONTACTS AT ANY TIME BY SELECTING THE CONTACT YOU WISH TO DELETE BY TEXTING A0 B0 OR C0 TO THE EV-07S.

SETTING THE CORRECT TIME ON

YOUR EV-07S FOR YOUR LOCATION

• UTC TIME HAS BEEN SET AS DEFAULT ON YOUR EV-07S PERSONAL TRACKING DEVICE.

• CHANGING YOUR DEVICES TIME IS DONE BY SENDING THE EV-07S A TEXT MESSAGE CONTAINING THE FOLLOWING INSTRUCTION.

• TZ+00 OR -00

• THE TIME DIFFERENCE YOU ARE SETTING IS DONE IN 2 DIGITS WITH A MAXIMUM OF 23 IN VALUE.

• THE + REPRESENTS EAST AND – REPRESENTS WEST.

• FOR EXAMPLE YOU ARE GOING ON A TRIP TO PARIS, YOU WILL NEED TO SEND A TEXT MESSAGE TO YOUR EV-07S CONTAINING TZ+01

• YOUR EV-07S IS NOW SET 1 HOUR FORWARD, GIVING THE CORRECT TIME WHEN IN PARIS.

• ON YOUR RETURN YOU WISH TO RETURN YOUR EV-07S BACK TO UK TIME. THIS CAN BE DONE BY SENDING A TEXT MESSAGE CONTAINING THE FOLLOWING – TZ-01

• YOU HAVE NOW MANAGED TO ALTER THE EV-07S TIME FORWARD 1 HOUR AND BACK 1 HOUR.

REQUESTING A CURRENT LOCATION

FROM THE EV-07S PERSONAL GPS TRACKER

• IF YOU WOULD LIKE TO FIND THE LOCATION OF THE EV-07S PERSONAL GPS TRACKING DEVICE AT ANYTIME.

• SEND YOUR EV-07S A TEXT MESSAGE CONTAINING THE FOLLOWING REQUEST.

• LOC

• YOUR EV-07S WILL REPLY WITH A TEXT MESSAGE CONTAING THE FOLLOWING INFORMATION.

• TIME, LATITUED, LONGDITUDE, SPEED, ALTITUDE AND BATTERY LEVEL, FOLLOWED BY A GOOGLE MAP LINK.

• CLICK ON THE LINK WITHIN THE MESSAGE AND YOUR PHONE WILL OPEN GOOGLE MAPS. IF YOU HAVE IT INSTALLED.

• THE EV-07S USER WILL THEN BE SHOWN ON THE MAP AT IT’S CURRENT LOCATION.

REQUESTING A CURRENT LOCATION

FROM THE EV-07S PERSONAL GPS TRACKER

• IF YOU WOULD LIKE ADDRESS DETAILS OF WHERE THE EV-07S

USER IS, TEXT THE FOLLOWING TO THE EV-07S DEVICE.

• ADD

• THIS FUNCTION NEEDS GPRS FUNCTION SUPPORT.

• THE EV-07S WILL REPLY “ADD, MUM, 3 HIGH ST, EXETER, UK;

EV-07S LOW BATTERY ALARM

• WHEN THE EV-07S BATTERY IS BELOW 15%, IT WILL SEND ALL THE PRE-SET CONTACT NUMBERS A TEXT MESSAGE STATING THAT THE BATTERY IS GETTING LOW.

• “BAT:LOW!”

• IF THE BATTERY FALLS BELOW 15%THE BLUE LIGHT WILL FLASH RAPIDLY TO WARN THE USER TO CHARGE THE DEVICE AS SOON AS POSSIBLE.

• TO ACTIVATE THIS FUNCTION TEXT LOW1 TO THE EV-07S DEVICE.

• TO DISABLE THIS FUNCTION TEXT LOW0 TO THE EV-07S.

• THIS FUNCTION IS GREAT WHEN THE DEVICE IS USED BY YOUNG OR ELDERLY USERS AS YOU WILL BE AWARE THE DEVICE NEEDS CHARGING EVEN IF THEY FORGET. MEANING GREATER PIECE OF MIND.

SETTING THE EV-07S PIN LOCK

• IF YOU WOULD LIKE TO RESTRICT THE ABLILITY TO CHANGE THE SETTINGS BY OTHER USERS YOU WILL NEED TO SEND A TEXT MESSAGE TO THE EV-07S CONTAINING THE FOLLOWING INFORMATION.

• 123456LOCK

• AFTER SENDING THIS COMMAND YOU WILL NEED TO INCLUDE THE PIN CODE INFRONT OF EVERY COMMAND EXCEPT REBOOT AND RESET.

• FOR EXAMPLE 123456LOC OR 123456A1 – THE DEFAULT PIN CODE IS 123456

CHANGING THE EV-07S PASSWORD

• CHANGING THE PASSWORD OR PIN CODE PROTECTING YOUR EV-07S IS SIMPLE AND EASY TO DO.

• TEXT YOUR EV-07S PERSONAL GPS TRACKING DEVICE WITH THE FOLLOWING MESSAGE.

• OLD PASSWORD + H + NEW PASSWORD.

• FOR EXAMPLE – 123456H666666

• YOUR PIN CODE HAS NOW BEEN CHANGED TO 666666. DON’T FORGET TO WRITE DOWN YOUR CHOSSEN PIN CODE AS THIS WILL NOT BE REMOVED WHEN CHANGING SIM CARDS.

• NEW PIN CODES MUST BE 6 DIGIT’S OR THE EV-07S WILL NOT RECOGNISE THE PIN CONE.

SETTING THE EV-07S GEO-FENCE

ALARM

• THE EV-07S HAS THE ADILITY TO SET AN AREA THAT THE USER SHOULD STAY WITHIN. BY SENDING A TEXT MESSAGE TO THE EV-07S GPS DEVICE AND AREA CAN BE SET FROM THE USERS CURRENT LOCATION.

• THIS FUNCTION IS GREAT WHEN THE USER HAS TENDENCIES TO WONDER OFF ON THEIR OWN WHILST OUT.

• THE FOLLOWING COMMANDS ARE USED BELOW.

• G+X,Y,Z,XXXM/KM

• G = IS FOR THE GEO-FENCE.

• X = THE NUMBER OF USERS THAT CAN SET THE GEO-FENCE (1~3)

• Y = 0 MEANS TURN THE FUNCTION OFF.

• Y = 1 MEANS TURN THE FUNTION ON.

• Z = 0 MEANS TO SET AN ALARM WHEN THE USER GOES OUTSIDE OF THE PRE-SET AREA.

• Z = 1 MEANS TO SET AN ALARM WHEN THE USER ENTERS THE PRE-SET AREA.

SETTING THE EV-07S GEO-FENCE

ALARM

• XXX = THE DISTANCE THE USER CAN GO FROM THEIR CURRENT LOCATION BEFORE AN ALARM IS RAISED.

• M = MEANS METERS FROM CURRENT LOCATION WITH 100M AS THE MINIMUM SET DISTANCE.

• KM = MEANS KILOMETERS FROM CURRENT LOCATION WITH 001 KILOMETER AS THE MINIMUM DISTANCE.

• IF THE USER COMES IN TO OR GOES OUT OF THE PRE-SET AREA, A TEXT MESSAGE ALERT WILL BE SENT TO ALL CONTACTS AND WILL CONTAIN A GOOGLE MAP LINK .

• TO TURN THIS FUNCTION OFF SIMPLY TEXT YOUR EV-07S THE FOLLOWING MESSAGE.

• G1,0 – G2,0 – G3,0

• G1 REPRESENTS CONTACT ONE, G2 CONTACT TWO AND G3 CONTACT THREE.

SETTING THE EV-07S MOVEMENT

ALERTS

• TO SET THE MOVEMENT ALERT, SIMPLY TEXT THE EV-07S THE FOLLOWING COMMAND.

• M1,100M/KM

• M1 = TURNS ON THE MOVEMENT ALERT FUNCTION.

• M = THE DISTACE IN METERS WITH THE MINIMUM SETTABLE BEING 100M

• KM = HOW MANY KILOMETERS THE DIVICE V CAN TRAVEL THIS 001KM BEING THE MINIMUM DISTANCE.

• THIS WILL SET THE DISTANCE THE GPS DEVICE CAN TRAVEL BEFORE SETTING OFF A MOVEMENT ALERT.

• THE GPS DEVICE MUST BE STATIONARY WHEN ACTIVATING THIS FUNCTION.

• TO DE-ACTIVATE THIS FUNTION, TEXT M0 TO YOUR EV-07S

• THIS FUNCTION IS GREAT FOR KEEPING TRACK OF YOUR VEHICLE AND PROPERTY.

SETTING THE EV-07S OVER-SPEED

ALERT

• TO SET THE MAXIMUM SPEED YOU WOULD LIKE THE USER TO STAY UNDER CAN BE DONE BY SIMPLY SENDING THE FOLLOWING MESSAGE.

• SPEED1, + SPEED

• FOR EXAMPLE YOUR ASSIGNED EV-07S USER IS A LONE WORKER AND THEY TRAVEL TO AND FROM DIFFERENT PLACES OF WORK. YOU WOULD LIKE TO MAKE SURE THEY ARE ADHEARING TO THE ROAD SAFETY LAWS AND DO NOT MISS USE THEIR COMPANY VEHICLE, YOU CAN SET A SPEED AT WHICH THE USER SHOULD NOT EXEED. AN OVER-SPEED ALERT MESSAGE WILL BE SENT IF THE USER TRAVELS BEYOND THE PRE-SET LIMIT, SAY 100KM PER HOUR.

• TO SET THIS FIGURE SEND SPEED1,100

• TO TURN OFF THIS FUNCTION SEND SPEED0

THE EV-07S LISTEN-IN FUNCTION

• IT IS POSSIBLE TO MAKE A SILENT CALL TO THE EV-07S GPS TRACKER. THE EV-07S WILL ANSWER THE CALL AUTOMATICALLY, ALLOWING THE CALLER TO HERE WHAT IS HAPPENING AROUND THE TRACKER.

• THERE IS NO VOICE INDICATION THAT THE CALL IS IN PROGRESS.

• TO TURN ON THE LISTEN-IN FUNCTION TEXT L1 TO THE GPS DEVICE.

• TO TURN OFF THE LISTEN-IN FUCTION TEXT L0 TO THE GPS DEVICE.

THE EV-07S FALL DETECTION

FUNCTION

• IF THE USER OF THE EV-07S IS A LONE WORKER OR A PERSON THAT SPENDS EXTENDED PERIODS OF TIME ON THEIR OWN.

• A SIMPLE FALL COULD PROGRESS VERY QUICKLY IN TO A DEVASTATING RESULT IF GONE UN-NOTICED.

• ALL PRE-SET CONTACTS WILL BE ALERTED WITHOUT THE NEED FOR THE USER TO ACTIVATE THE SOS BUTTON.

• TO ACTIVATE THIS FUNTION TEXT FL1 TO THE EV-07S.

• TO DEACTIVATE THIS FUNCTION TEXT F0 TO THE EV-07S.

• THE EV-07S MUST SENSE BOTH IMPACT AND ANGLE TO ACTIVATE ALERT.

THESE ARE JUST SOME OF THE

FUNCTION SETTINGS FOR THE

EV-07S

FOR MORE SETTINGS PLEASE REFER TO YOUR

EV-07S USER MANUAL

IF YOU FOUND OUR VIDEO HELPFUL, PLEASE HIT THE LIKE

BUTTON AND DON’T FORGET TO SUBCRIBE TO OUR CHANEL TO

GET NOTIFICATIONS WHEN WE UPLOAD A NEW VIDEO. LINKS ARE

IN THE DECRIPTION AND PLEASE WRITE YOUR COMMENTS IN THE

SECTION BELOW.

THANKS FOR WATCHING

ASTA GPS TRACKERS