The Clock Is Ticking

Are you “Quad O” ready?

EPA “Quad O” Deadline

The clock is ticking and our Vapor Recovery Units (VRU’s)

will help you meet the Environmental Protection Agencies

(EPA) “Quad O” regulations by the deadline of April 15th,

2015. “Quad O” pertains to storage vessels constructed,

reconstructed, or modified between August 23rd, 2011

and before April 12th, 2013. You must reduce site Volatile

Organic Compounds (VOC’s) to less than six tons per year.

We can help you capture 100% of tank emission vapors

with our VRU’s and re-sell the captured gases allowing the

VRU to pay for itself!

WE CAN HELP YOU BECOME EPA COMPLIANT!

Capturing natural gas emissions from oil field stock tanks has never been this

easy and financially rewarding! By meeting all of the EPA regulations, you are not

only capturing the illegal Volatile Organic Compounds, but you are also able to

re-sell the captured gases allowing the Vapor Recovery Unit (VRU) to pay for itself!

The BOSS® Tycoon Series VRU’s are developed to help capture the VOC’s and

put them where they belong, in the sales line! This self-contained unit is centered

around our proven oil flooded Rotary Screw, perfect where low maintenance and

larger volumes are required.

800/635-6587 BOSSair.com

The BOSS VRU system can deliver economical and efficient solutions while maximizing your

production and preserving the environment.

100%C A P T U R E D

0%TO ATMOSPHERE

Why an Oil Flooded Rotary Screw Compressor?

Very cost-effective for handling high volumes of gas in vapor recovery. Low maintenance and high reliability are inherent because they have few moving parts. There are no valves, rings, or packing to wear out or cause loss of efficiency.

Smooth operation results from no unbalanced forces.

No special foundation is required, and there are no piping vibrations from pressure pulsations. All iron or steel construction with no copper or brass making these compressors compatible with natural gas: sweet or sour.

Rotary Screws by far, are the most efficient and reliable way to move gas.

800/635-6587 BOSSair.com

THE TYCOON SERIES ADVANTAGE

Our VRU’s are fully self-contained and engineered around a rotary screw compressor

that is simple to install, operate, and maintain! Featuring our automated precision

monitored control system with integrated blanket gas management, these VRU’s are

suited to accommodate the tight control needed to maintain the low pressure range

of vapor recovery.

Low cost. High reliability. Big returns.

• Low Maintenance

• High Reliability

• Smooth, Quiet Operation

• Natural Gas Engine OR Electric Motor Driven

• Very Effective for Handling Wet Gas

800/635-6587 BOSSair.com

FEATURES• EPA emissions compliant

• Meets Class 1 Division 2 Group D

• Compressor is direct coupled to the prime mover

• Easy installation

• Skid mounted

• Natural gas engine or electric motor drive

• Discharge pressures up to 220 PSIG

• Digital PLC instruments and controls (Optional)

• VFD automatically adjusts motor speed (Optional)

BENEFITS• Maximize return on investment

• Low maintenance and high reliability

• Smooth, quiet operation

• Recover every BTU and avoid vapor emissions to atmosphere

• 100% Captured VOC’s, 0% to atmosphere

• Environmentally friendly

NATURAL GAS DRIVEN ENGINECentered around an emission compliant, General Motors built 3.0L Natural Gas Engine, this VRU is ideal for when there is no on-site power available.

• Designed to Run Unattended

• Completely Self-Contained

• No Special Foundation Required

• Easy Installation

• Small Footprint

ELECTRICmotor DRIVENWhen on-site power is available, this VRU is the way to go!

• Meets Class 1 Division 2 Group D Requirements

• Operates on 3-Phase, 460v

• Designed to Run Unattended

• No Special Foundation Required

• Easy Installation

• Small Footprint

VRU kits

GAS COMPRESSOR KITSBoss Industries pre-engineered Gas Compressor Kits are ideal for your customized needs. Our oil flooded gas compressor kits provide unmatched quality, integrity, and superior design. With a wide range of compressors ranging from 10 to 700 MSCFD at up to 220 PSIG discharge pressures that allows you to meet all your vapor recovery requirements.

• Simple installation with proven BOSS components

• Capable of Electric or Natural Gas Driven

• Pressure vessels meet ASME Section VIII

• Wide range of oil flooded screw compressors with various gear ratio’s for each model

• Oversized inlet gas scrubber with internal blow case and inlet filtration for maximum liquid handling capacity

800/635-6587 BOSSair.com

1761 Genesis Drive, La Porte, IN 46350