teller screen project portfolio

The Need. The retail banking industry is changing rapidly. The rise of mobile banking has significantly reduced foot traffic into brick-and-mortar locations. Automated tellers are making basic transactions more efficient, reducing the need for on-site personnel. Drive-through windows are also in decline, adding to the total number of unused teller lines. Ten percent of our client’s banking centers have closed within the past two years, but remaining locations have barely begun to adapt to this paradigm shift. Some difficult decisions will have to be made about how to effectively down-size redundant retail banking space.

The Opportunity. Banks must now compete to maintain their market share through creative branding. Retail banks face a daunting and urgent challenge: What is the best way to update existing locations without expensive renovations?

The Solution. Our team developed this set of Teller Screen fixtures to promote branding continuity, clarify programmatic use of space, and act as a fresh coat of paint to make banking centers appear more vibrant. 3 of the 5 concepts shown above went into production in Fall, 2015. Of the 436 sites surveyed in 2016, 325 received Teller Screens.

u�es beuer ren ecre con,ecred

Ge� Tiore rewards

graphic designerJAC CORNELIUS

PROJECT PORTFOLIO

john.adams.cornelius@gmail 708.927.7797

INTENTTeller Screen

CONCEPTAcrylic Panels

Pictured (below + right) - Proposed counter “truss” mount for the Teller Screen fixture. Similar renderings are reviewed by the client for approval and used by vendors as installation guides

Purpose. These fixtures block unused portions of a teller line or drive-up window with a branded element that is complimentary to the existing banking center environment.

Structure. Fixtures are composed of three vertical poles, mounted at two points, and spanned by branded acrylic panels.

Benefit. We engineered the fixture so Point-of-Sale panels can be added to the framework and updated with new graphics to reflect current promotions.

Mount DetailDrop - CeilingFreestandingCeiling

Soffit

Counter

80TFASSEMBLYSPECS MODEL PLACEMENT CONTENTS

Measure available distance from the floor to the ceiling / soffit in the proposed installation area. Unless the full height of the poles is required, cut all poles down to desired length.

Install FLOOR MOUNT using appropriate anchor / fastener (not included). Note: Align the direction of the threaded holed with the acrylic panels. Attach the next floor mount 22” O.C.

Tilt ROUND REED and slide the bottom over FLOOR MOUNT. Line up holes in ROUND REED with threaded holes in the FLOOR MOUNT.

Push CEILING PLATE from REED PLATE until the CEILING PLATE contacts the ceiling. Make sure the ROUND REED is straight and level. Mark holes and install anchors in ceiling. Line up CEILING PLATE holes, level the ROUND REED, and then tighten the THREADED ROD.

Insert ADJUSTABLE CEILING MOUNT into top of ROUND REED as shown.

Install included M8 SCREWS into FLOOR MOUNT.

Teller Screen - Floor to Ceiling Mount

1. 2. 3.

4. 5. 6.

Name of Branch:

Address:

Bank Manager/Contact: Telephone Number:

FLOOR TO CEILING(MOUNT WITH SCREWS)DA BCOUNTER TO

DRYWALL/MILLWORK(MOUNT WITH SCREWS)

TELLER LINE SCREEN SITE SURVEY

50 GREENE STREET I NEW YORK, NY 10013 I T 212.924.8713 I F 212.924.8674 I WWW.ALU.COM

COUNTER TO ACRYLIC/GLASS(MOUNT WITH ADHESIVE)

C COUNTER TO CEILING

Name of Surveyor:

Email of Surveyor:

Telephone of Surveyor:

1. CHOOSE EITHER SET-UP A, B, C OR D: A= FLOOR TO CEILING, B= COUNTER TO MILLWORK WALL, C= WALL TO ACRYLIC/GLASS WINDOW/WALL OR D= COUNTER TO CEILING (NEXT PAGE).2. FILL-IN REQUIRED DIMENSIONS.3. CHOOSE QUANTITY OF SET-UPS (SET-UPS ARE BY PAIRS).4. FILL-IN CONTACT INFORMATION.

CEILING CEILING

COUNTER COUNTERCOUNTER

B OR C

QUANTITYOF UNITS

QUANTITYOF UNITS

48”(ONE UNIT)QUANTITY

OF UNITS

48”(ONE UNIT)

46.25”(ONE UNIT)

TOTAL WIDTH TOBE COVERED BYSCREEN UNITS:

CEILING HEIGHTABOVE FINISHEDFLOOR =

CEILING HEIGHTABOVE COUNTER =

COUNTER HEIGHTABOVE FINISHEDFLOOR =

POLE HEIGHTABOVE COUNTER =

COUNTER HEIGHTABOVE FINISHEDFLOOR =

TOTAL WIDTH TOBE COVERED BYSCREEN UNITS =

TOTAL WIDTH TOBE COVERED BYSCREEN UNITS =

COUNTER

DIMENSION OF LENGTHOF WALL MOUNT(CUT DURING INSTALLATION) =

2 3/16”

CONCEPT



Fabric Panels

Standardization. I collaborated with our aluminium and acrylic manufacturers to set standard dimensions for each fixture iteration, which maximized cost- savings on materials and refined our kitting logic.

Based on individual site survey dimensions, fixture components are kitted together into modular units from three different pole lengths, three mounting options, and two panel configurations.

PRODUCTIONEngineer Approval

Flexibility. Many of the prospective fixture locations have drop-ceilings, which are not stable enough to support standard mounting methods. I developed a track system which could be suspended from the metal drop-ceiling grid. We opted for adjustable fabric banners in order to keep the fixtures light and flexible. We added small weighted rods to the base of each banner to keep them taut and uniform. This configuration also works in the event of preexisting obstructions on the floor and counter.

Pictured (left) -In-situ rendering of a proposed fabric panel configuration

Pictured (right) -Quick mock-up as viewed from point-of-sale

Pictured (top) - Prototype hanging fixtures installed in a retail banking center

IMPLEMENTATIONDocumentation + Instructions

Pictured (above) - These simple vector diagrams, incorporated into a site survey spreadsheet, allowed for basic dimensions to be captured via data metrics. This analysis streamlined fabrication, kitting, and fulfilment

Pictured (right) - Accurate, detailed assembly diagrams placed the onus on installation vendors and increased the overall success rate of the fixture rollout

Pictured (above) - Italian manufacturer, ALU, generated the construction documents and evaluated the final engineering specs


ELISA WINTER-HOLBEN

ALU

ACRYLIC DESIGN ASSOCIATES

WINTER - HOLBEN ARCHITECTURE

ALU

ACRYLIC DESIGN ASSOCIATES

CREATIVE DIRECTOR

MANUFACTURER

MANUFACTURER

207.994.3104

763.559.8395

+0039 0424 516816

[email protected]

[email protected]

email: [email protected]

http://www.winterholben.com

www.alu.com

http://www.acrylicdesign.com

CONTACT

CONTACT

CONTACT

Phone:

Phone:

Phone:

E-mail:

E-mail:

E-mail:

Web:

Web:Web:

Web:

7 Wallingford Square, THINKYARD Unit 2099Kittery, ME 03904

Via del Commercio n. 22, Romano D’ezzelino (VI), Italy

6050 Nathan Lane, Minneapolis, MN 55442

Elisa created the initial product design. She was the driving force behind this concept becoming a production fixture.

ADA assisted in the production of prototypes and continues to manufacture all acrylic components for corresponding fixtures.

All images contained in this portfolio were created by Jac Cornelius unless otherwise indicated.

ALU created final construction documents and continues to fabricate all metal components for corresponding fixtures.

CREDITS


GREG NELSON

JOHN RYAN PERFORMANCE

SENIOR PROJECT MANAGER

[email protected]

CONTACT

Phone:E-mail:Web:

1350 Lagoon Ave, Suite 800Minneapolis, MN 55408

Greg Nelson coordinated efforts between vendors. He delegated work internally and created production schedules.

teller screen project portfolio

Documents