technical data for - seekpartfile.seekpart.com/keywordpdf/2011/3/22/201132263620707.pdf ·...
TRANSCRIPT
Technical Data for:
Forged Steel Gate Valves
Forged Steel Globe Valves
Forged Steel Check Valves
RP&C / Bonney Forge Valves
RP&C FORGED STEEL CHECK VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 2C
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
C90D NPT ENDS SIZES ¼” THRU 2”
C91D SOCKET WELD ENDS
• ASTM A182 Gr. F5 • WORKING PRESSURE (NON-SHOCK)
600 PSIG @ 975° F. Steam-Oil 800 PSIG @ 930° F. Steam-Oil 2000 PSIG @ -20° To 100° F.
K90D NPT ENDS SIZES ¼” THRU 2”
K91D SOCKET WELD ENDS
• ASTM A182 Gr. F22 Cl. 3 • WORKING PRESSURE (NON-SHOCK)
600 PSIG @ 1615° F. Steam-Oil 800 PSIG @ 1355° F. Steam-Oil 2000 PSIG @ -20° To 100° F
HORIZONTAL SERVICE ONLY • PISTON CHECK VALVE • STANDARD PORT • BOLTED COVER • CONFORM TO THE APPLICABLE PARTS OF
THEFOLLOWING SPECIFICATIONS: API
API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Nameplate Aluminum
2 Cover Forged Steel A182 Grade F5
2 Cover Forged Steel A182 Grade F22 Cl. 3
3 Cover Bolts Alloy Steel A193 Grade B16
4 * Gasket 316 SS/Grafoil® Spiral Wound
5 Disc 420 Stainless Steel A582 Heat Treated
6 Body Forged Steel A182 Grade F5
6 Body Forged Steel A182 Grade F22 Cl. 3
7 Seat Cobalt-Chromium Super Alloy CoCr-A
* Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size End To End Center to Top(Open)
Port Dia. Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 3 2-3/16 9/32 .555 .375 3-1/4 .8
3/8 3 2-3/16 5/16 .690 .375 3-1/4 .9
1/2 3 2-3/16 3/8 .855 .375 3-1/4 1.0
3/4 3-1/2 2-7/16 ½ 1.065 .500 3-3/4 2.7
1 4-3/8 2-13/16 ¾ 1.330 .500 5-1/2 6.4
1-1/4 6 3-11/16 1 1.675 .500 11 14.0
1-1/2 6 3-11/16 1-1/4 1.915 .500 11 18.0
2 7 4-5/16 1-1/2 2.406 .625 14-1/2 24.0
FLOW
RP&C FORGED STEEL CHECK VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 11Y
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
F1300E SIZES 1/4” THRU 1-1/2” NPT
F1310E SIZES 1/4” THRU 2” SOCKET WELD F1320E SIZES 1/4” THRU 2” BUTT WELD • SPRING LOADED PISTON CHECK VALVES • HORIZONTAL OR VERTICAL SERVICE • FORGED STEEL ASTM A105
• SEAL WELDED COVER
• REFER TO CHART ON PAGE 2Y FOR PRESSURE/TEMP. RATINGS
(NOT RECOMMENDED FOR PROLONGED USE ABOVE 800 F°) • CONFORMS TO THE APPLICABLE PARTS OF THE
FOLLOWING ASME/ANSI SPECIFICATIONS: B16.34 B31.3 B1.20.1 SCREWED ENDS B16.11 SOCKET WELD ENDS B16.25 BUTT WELD ENDS
MATERIALS OF CONSTRUCTION
NO. PART MATERIAL ASTM SPEC.
REMARKS
1 Body Forged Steel A105
2 Seat Ring Cobalt-Chromium Super Alloy CoCr-A
3 Cover Forged Steel A105
4 Disc Cobalt-Chromium Super Alloy CoCr-A
5 Spring Stainless Steel Type 302
6 Nameplate Aluminum
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size End To End Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 4-1/2 3-1/8 5-16 .555 .375 3-3/4 2.0
3/8 4-1/2 3-1/8 3/8 .690 .375 3-3/4 2.5
1/2 4-1/2 3-1/8 7/16 .855 .375 3-3/4 3.5
3/4 4-1/2 3-1/8 9/16 1.065 .500 3-3/4 5.6
1 5-7/16 3-3/4 13/16 1.330 .500 6-1/2 12.7
1-1/4 8-1/4 5-5/16 1-1/8 1.675 .500 15-1/2 26.0
1-1/2 8-1/4 5-5/16 1-1/4 1.915 .500 15-1/2 35.0
2 9-1/2 6-5/16 1-9/16 2.406 .625 24 46.0
FLOW
RP&C FORGED STEEL CHECK VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 13Y
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
F1350E SIZES 1/4” THRU 1-1/2” NPT (CLASS 2500)*
F1360E SIZES 1/4” THRU 2” SOCKET WELD F1370E SIZES 1/4” THRU 2” BUTT WELD • SPRING LOADED PISTON CHECK VALVES • HORIZONTAL OR VERTICAL SERVICE • FORGED STEEL ASTM A105
• SEAL WELDED COVER
• REFER TO CHART ON PAGE 2Y FOR PRESSURE/TEMP. RATINGS
(NOT RECOMMENDED FOR PROLONGED USE ABOVE 800 F°)
• CONFORMS TO THE APPLICABLE PARTS OF THE
FOLLOWING ASME/ANSI SPECIFICATIONS: B16.34 B31.3 B1.20.1 SCREWED ENDS B16.11 SOCKET WELD ENDS B16.25 BUTT WELD ENDS
MATERIALS OF CONSTRUCTION
NO. PART MATERIAL ASTM SPEC.
REMARKS
1 Body Forged Steel A105
2 Seat Ring Cobalt-Chromium Super Alloy CoCr-A
3 Cover Forged Steel A105
4 Disc Cobalt-Chromium Super Alloy CoCr-A
5 Spring Stainless Steel Type 302
6 Nameplate Aluminum
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size End To End Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 4-1/2 3-1/8 5-16 .555 .375 3-3/4 2.0
3/8 4-1/2 3-1/8 3/8 .690 .375 3-3/4 2.5
1/2 4-1/2 3-1/8 7/16 .855 .375 3-3/4 3.5
3/4 4-1/2 3-1/8 9/16 1.065 .500 3-3/4 5.6
1 5-7/16 3-3/4 13/16 1.330 .500 6-1/2 12.7
1-1/4 8-1/4 5-5/16 1-1/8 1.675 .500 15-1/2 26.0
1-1/2 8-1/4 5-5/16 1-1/4 1.915 .500 15-1/2 35.0
2 9-1/2 6-5/16 1-9/16 2.406 .625 24 46.0
FLOW
ASME B16.34 DOES NOT ALLOW FOR THREADED ENDS ABOVE CLASS 2500
RP&C FORGED STEEL CHECK VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 7C
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
F190D CLASS 150 FLANGED
F390D CLASS 300 FLANGED
F690D CLASS 600 FLANGED • SIZES 1/2” THRU 2”
FOR HORIZONTAL SERVICE ONLY
• FORGED STEEL • ASTM A105N, LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • BOLTED COVER • WORKING PRESSURE (NON-SHOCK)
CLASS 150 150 PSIG @ 576° F. Steam-Oil
285 PSIG @ -20° To 100° F. CLASS 300
300 PSIG @ 839° F. Steam-Oil 740 PSIG @ -20° To 100° F.
CLASS 600 600 PSIG @ 576° F. Steam-Oil 1480 PSIG @ -20° To 100° F.
• CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
No. Part Material ASTM Spec.
Remarks
1 Nameplate Aluminum
2 Cover Forged Steel, Normalized A105N Low Carbon
3 Cover Bolts Alloy Steel A193 Grade B7
4 * Gasket 316 SS/Grafoil® Spiral Wound
5 Disc 420 Stainless Steel A582 Heat Treated
6 Body Forged Steel, Normalized A105N Low Carbon
7 Seat Cobalt-Chromium Super Alloy CoCr-A
* Recommended Spare Parts
Note: Materials of construction may vary due to availability and Production runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Face To Face Approximate Weight Size
150 300 600
Center to Top(Open)
Port Dia. 150 300 600
Typical Cv Factors
½ 4-1/4 6 6-1/2 6-3/8 3/8 6 7-1/4 7-3/4 1.0
¾ 4-5/8 7 7-1/2 6-5/8 ½ 6-3/4 9-3/4 10-3/4 2.7
1 5 8 8-1/2 8-1/4 ¾ 10 11 12 6.4
1 ½ 6-1/2 9 9-1/2 9-1/4 1-1/4 17 22 25 18.0
2 8 10-1/2 11-1/2 11 1-1/2 26 32 34 24.0
FLOW
RP&C FORGED STEEL CHECK VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 8C
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
F191D CLASS 150 FLANGED
F391D CLASS 300 FLANGED
F691D CLASS 600 FLANGED
SIZES ¼” THRU 2”
FOR HORIZONTAL SERVICE ONLY • FORGED STEEL • ASTM A105, LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – STOP/CHECK VALVE
CLASS 150 150 PSIG @ 576° F. Steam-Oil
285 PSIG @ -20° To 100° F. CLASS 300
300 PSIG @ 839° F. Steam-Oil 740 PSIG @ -20° To 100° F.
CLASS 600 600 PSIG @ 576° F. Steam-Oil 1480 PSIG @ -20° To 100° F.
• CONFORM TO THE APPLICABLE PARTS OF THE FOLLOWING SPECIFICATIONS:
API API 598 API 602
ASME/ANSI B1.20.1 B16.11 B16.34 B31.1 B31.3
• MATERIALS OF CONSTRUCTION
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Nameplate Aluminum
4 Operating Nut Stainless Steel A276 Type 410
5 Stem Stainless Steel A276 Type 410
6 Gland Nuts 303 Stainless Steel A194 Grade 8F
7 Gland Flange Carbon Steel A108 Grade 1018
8 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
9 Eyebolt 410 Stainless Steel Hardened & Tempered
10 Eyebolt Washer Carbon Steel Grade 1018
11a * Packing Graphite Grafoil® (241 or equal)
11b * Wiper Rings Braided Graphite 1630GF or equal
12 Bonnet Bolts Alloy Steel A193 Grade B7
13 Bonnet Forged Steel, Normalized A105N Low Carbon
14 * Gasket 316 SS/Grafoil® Spiral Wound
15 Seat Cobalt-Chromium Super Alloy CoCr-A
16 Disc 420 Stainless Steel A582 Heat Treated
17 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Face To Face Approximate Weight Size
Handwheel Dia. 150 300 600
Center to Top(Open)
Port Dia. 150 300 600
Typical Cv Factors
½ 3-7/8 4-1/4 6 6-1/2 6-3/8 3/8 6-3/4 7 8 1.0
¾ 3-7/8 4-5/8 7 7-1/2 6-5/8 ½ 7-1/2 10 11 2.7
1 5-1/2 5 8 8-1/2 8-1/4 ¾ 11 14 15 6.4
1 ½ 5-1/2 6-1/2 9 9-1/2 9-1/4 1-1/4 19 24-1/2 26 18.0
2 6-1/2 8 10-1/2 11-1/2 11 1-1/2 30 38 40 24.0
FLOW
RP&C VALVES – CLASS 1500
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 7 V15
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
F594E NPT ENDS
F595E SOCKET WELD ENDS
SIZES 1/2” THRU 2”
• PISTON CHECK VALVE • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – BOLTED BONNET • WORKING PRESSURE (NON-SHOCK)
860 PSIG @ 900° F. Steam-Oil 1340 PSIG @ 850° F. Steam-Oil 3705 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION E TRIM (13 Cr/FHF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Nameplate Aluminum
2 Cap Forged Steel, Normalized A015N Low Carbon
3 Cap Bolts Alloy Steel A193 Grade B7
4 * Gasket 316 SS/Grafoil® Spiral Wound
5 Disc Cobalt-Chromium Super Alloy CoCr-A
6 Body Forged Steel, Normalized A105N Low Carbon
7 Seat Cobalt-Chromium Super Alloy CoCr-A
8 Spring Stainless Steel Type 302
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size End To End Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/2 4 2-7/8 25/64 .855 .375 5-1/2 1.3
3/4 4 2-7/8 1/2 1.065 .500 6-1/4 1.8
1 5-1/2 3-5/16 3/4 1.330 .500 10 7.0
1-1/2 6-1/2 4-7/16 1-3/16 1.915 .500 18-1/2 18.1
2 7 6-1/4 1-15/32 2.406 .625 29-3/4 23
RP&C FORGED STEEL CHECK VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 1C
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
F90D NPT ENDS SIZES ¼” THRU 2”
F91D SOCKET WELD ENDS
• FORGED STEEL • ASTM A105, LOW CARBON (.25 MAX.), NORMALIZED • WORKING PRESSURE (NON-SHOCK)
460 PSIG @ 900° F. Steam-Oil 715 PSIG @ 850° F. Steam-Oil 1975 PSIG @ -20° To 100° F.
LF90D NPT ENDS SIZES ¼” THRU 2”
LF91D SOCKET WELD ENDS
• ASTM A350 Gr. LF2 (for low temperature service) • WORKING PRESSURE (NON-SHOCK)
1100 PSIG @ 800° F. Steam-Oil 1975 PSIG @ -50° To 100° F. 800° F. IS MAX OPERATING TEMP. FOR LF2
HORIZONTAL SERVICE ONLY • PISTON CHECK VALVE • STANDARD PORT • BOLTED COVER • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Nameplate Aluminum
2 Cover Forged Steel, Normalized A105N Low Carbon
2 Cover Forged Steel A350 Grade LF2
3 Cover Bolts Alloy Steel A193 Grade B7/ Grade B8M Cl.2
4 * Gasket 316 SS/Grafoil® Spiral Wound
5 Disc 420 Stainless Steel A582 Heat Treated
6 Body Forged Steel, Normalized A105N Low Carbon
6 Body Forged Steel A350 Grade LF2
7 Seat Cobalt-Chromium Super Alloy CoCr-A
* Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size End To End Center to Top(Open)
Port Dia. Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 3 2-3/16 9/32 .555 .375 3-1/4 .8
3/8 3 2-3/16 5/16 .690 .375 3-1/4 .9
1/2 3 2-3/16 3/8 .855 .375 3-1/4 1.0
3/4 3-1/2 2-7/16 ½ 1.065 .500 3-3/4 2.7
1 4-3/8 2-13/16 ¾ 1.330 .500 5-1/2 6.4
1-1/4 6 3-11/16 1 1.675 .500 11 14.0
1-1/2 6 3-11/16 1-1/4 1.915 .500 11 18.0
2 7 4-5/16 1-1/2 2.406 .625 14-1/2 24.0
FLOW
RP&C FORGED STEEL CHECK VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 4C
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
F92D NPT ENDS SIZES ¼” THRU 2”
F93D SOCKET WELD ENDS
HORIZONTAL SERVICE ONLY • ASTM A105, LOW CARBON (.25 MAX.), NORMALIZED • WORKING PRESSURE (NON-SHOCK)
460 PSIG @ 900° F. Steam-Oil 715 PSIG @ 850° F. Steam-Oil 1975 PSIG @ -20° To 100° F. • STOP/CHECK VALVE • STANDARD PORT • OS&Y – BOLTED BONNET • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Nameplate Aluminum
4 Operating Nut Stainless Steel A276 Type 410
5 Stem Stainless Steel A276 Type 410
6 Gland Nuts 303 Stainless Steel A194 Grade 8F
7 Gland Flange Carbon Steel A108 Grade 1018
8 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
9 Eyebolt 410 Stainless Steel Hardened & Tempered
10 Eyebolt Washer Carbon Steel Grade 1018
11a * Packing Graphite Grafoil® (241 or equal)
11b * Wiper Rings Braided Graphite 1630GF or equal
12 Bonnet Bolts Alloy Steel A193 Grade B7
13 Bonnet Forged Steel, Normalized A105N Low Carbon
14 * Gasket 316 SS/Grafoil® Spiral Wound
15 Seat Cobalt-Chromium Super Alloy CoCr-A
16 Disc 420 Stainless Steel A582 Heat Treated
17 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Dia.
Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 3-7/8 3 6-3/8 9/32 .555 .375 4 1.1
3/8 3-7/8 3 6-3/8 5/16 .690 .375 4 1.6
1/2 3-7/8 3 6-3/8 3/8 .855 .375 4 2.1
3/4 3-7/8 3-1/2 6-5/8 ½ 1.065 .500 4-1/2 3.1
1 5-1/2 4-3/8 8-1/4 ¾ 1.330 .500 7 7.0
1-1/4 5-1/2 6 9-1/4 1 1.675 .500 14 15.4
1-1/2 5-1/2 6 9-1/4 1-1/4 1.915 .500 13-1/2 18.1
2 6-1/2 7 11 1-1/2 2.406 .625 19 25.2
FLOW
RP&C FORGED STEEL CHECK VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 5C
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
F94D NPT ENDS SIZES ¼” THRU 2”
F95D SOCKET WELD ENDS
• FORGED STEEL • ASTM A105, LOW CARBON (.25 MAX.), NORMALIZED • WORKING PRESSURE (NON-SHOCK)
460 PSIG @ 900° F. Steam-Oil 715 PSIG @ 850° F. Steam-Oil 1975 PSIG @ -20° To 100° F.
HORIZONTAL SERVICE ONLY • SPRING LOADED PISTON CHECK VALVE • STANDARD PORT • BOLTED COVER • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Nameplate Aluminum
2 Cover Forged Steel, Normalized A105N Low Carbon
3 Cover Bolts Alloy Steel A193 Grade B7
4 * Gasket 316 SS/Grafoil® Spiral Wound
5 Disc 420 Stainless Steel A582 Heat Treated
6 Body Forged Steel, Normalized A105N Low Carbon
7 Seat Cobalt-Chromium Super Alloy CoCr-A
8 Spring Stainless Steel Type 302
* Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size End To End Center to Top(Open)
Port Dia. Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 3 2-3/16 9/32 .555 .375 3-1/4 .8
3/8 3 2-3/16 5/16 .690 .375 3-1/4 .9
1/2 3 2-3/16 3/8 .855 .375 3-1/4 1.0
3/4 3-1/2 2-7/16 ½ 1.065 .500 3-3/4 2.7
1 4-3/8 2-13/16 ¾ 1.330 .500 5-1/2 6.4
1-1/4 6 3-11/16 1 1.675 .500 11 14.0
1-1/2 6 3-11/16 1-1/4 1.915 .500 11 18.0
2 7 4-5/16 1-1/2 2.406 .625 14-1/2 24.0
FLOW
RP&C FORGED STEEL CHECK VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 6C
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
F96D NPT ENDS SIZES ¼” THRU 2”
F97D SOCKET WELD ENDS
• FORGED STEEL • ASTM A105, LOW CARBON (.25 MAX.), NORMALIZED • WORKING PRESSURE (NON-SHOCK)
460 PSIG @ 900° F. Steam-Oil 715 PSIG @ 850° F. Steam-Oil 1975 PSIG @ -20° To 100° F.
VERTICAL AND HORIZONTAL SERVICE • SPRING LOADED BALL CHECK VALVE • STANDARD PORT • BOLTED COVER • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION D TRIM (13Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Nameplate Aluminum
2 Cover Forged Steel, Normalized A105N Low Carbon
3 Cover Bolts Alloy Steel A193 Grade B7
4 * Gasket 316 SS/Grafoil® Spiral Wound
5 Ball Alloy Steel A276 Grade 440
6 Body Forged Steel, Normalized A105N Low Carbon
7 Seat Cobalt-Chromium Super Alloy CoCr-A
8 Spring Stainless Steel Type 302
9 Ball Guide 416 Stainless Steel A582 Type 416
* Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size End To End Center to Top(Open)
Port Dia. Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 3 2-3/16 9/32 .555 .375 3-1/4 .8
3/8 3 2-3/16 5/16 .690 .375 3-1/4 .9
1/2 3 2-3/16 3/8 .855 .375 3-1/4 1.0
3/4 3-1/2 2-7/16 ½ 1.065 .500 3-3/4 2.7
1 4-3/8 2-13/16 ¾ 1.330 .500 5-1/2 6.4
1-1/4 6 3-11/16 1 1.675 .500 11 14.0
1-1/2 6 3-11/16 1-1/4 1.915 .500 11 18.0
2 7 4-5/16 1-1/2 2.406 .625 14-1/2 24.0
RP&C FORGED STEEL CHECK VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 9C
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
F98A NPT ENDS SIZES ¼” THRU 2”
F99A SOCKET WELD ENDS
• SWING CHECK VALVE • ASTM A105, LOW CARBON (.25 MAX.), NORMALIZED • WORKING PRESSURE (NON-SHOCK)
460 PSIG @ 900° F. Steam-Oil 715 PSIG @ 850° F. Steam-Oil 1975 PSIG @ -20° To 100° F.
HORIZONTAL SERVICE ONLY • STANDARD PORT • BOLTED COVER • EXCELLENT Cv VALUES • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION A TRIM (316 SST) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Nameplate Aluminum
2 Cover Forged Steel, Normalized A105N Low Carbon
3 Cover Bolts Alloy Steel A193 Grade B7M
4 * Gasket 316 SS/Grafoil® Spiral Wound
5 Disc 316 Stainless Steel A276 Type 316
6 Disc Nut 303 Stainless Steel Grade 8F
7 Seat Ring 316 Stainless Steel A351 Type CF8M
8 Hinge Pin 316 Stainless Steel
9 Swing Arm 316 Stainless Steel A351 Type CF8M
10 Body Forged Steel, Normalized A105N Low Carbon
* Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size End To End Center to Top(Open)
Port Dia. Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/2 3 2-3/16 25/64 .855 .375 3-1/4 5.1
3/4 3-1/2 2-7/16 ½ 1.065 .500 3-3/4 9.3
1 4-3/8 2-13/16 ¾ 1.330 .500 5-1/2 24.8
1-1/2 6 3-11/16 1-3/16 1.915 .500 11 70.9
2 7 4-5/16 1-15/32 2.406 .625 14-1/2 91.6
RP&C VALVES – CLASS 1500
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 8 V15
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
FWB594E NPT ENDS
FWB595E SOCKET WELD ENDS
SIZES 1/2” THRU 2”
• PISTON CHECK VALVE • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – WELDED BONNET • WORKING PRESSURE (NON-SHOCK)
860 PSIG @ 900° F. Steam-Oil 1340 PSIG @ 850° F. Steam-Oil 3705 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION E TRIM (13 Cr/FHF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Nameplate Aluminum
2 Cap Forged Steel, Normalized A015N Low Carbon
3 Disc Cobalt-Chromium Super Alloy CoCr-A
4 Body Forged Steel, Normalized A105N Low Carbon
5 Seat Cobalt-Chromium Super Alloy CoCr-A
6 Spring Stainless Steel Type 302
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size End To End Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/2 4 2-7/8 25/64 .855 .375 5-1/2 1.3
3/4 4 2-7/8 1/2 1.065 .500 6-1/4 1.8
1 5-1/2 3-5/16 3/4 1.330 .500 10 7.0
1-1/2 6-1/2 4-7/16 1-3/16 1.915 .500 18-1/2 18.1
2 7 6-1/4 1-15/32 2.406 .625 29-3/4 23.0
RP&C FORGED STEEL CHECK VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 12Y
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
K1300E SIZES 1/4” THRU 1-1/2” NPT
K1310E SIZES 1/4” THRU 2” SOCKET WELD
K1320E SIZES 1/4” THRU 2” BUTT WELD
• SPRING LOADED PISTON CHECK VALVES • HORIZONTAL OR VERTICAL SERVICE • FORGED STEEL ASTM A182 GRADE F22 Cl. 3
(2-1/4% Chrome 1% Moly) • SEAL WELDED COVER
• REFER TO CHART ON PAGE 2Y FOR PRESSURE/TEMP. RATINGS
(NOT RECOMMENDED FOR PROLONGED USE ABOVE 1100 F°)
• CONFORMS TO THE APPLICABLE PARTS OF THE
FOLLOWING ASME/ANSI SPECIFICATIONS: B16.34 B31.3 B1.20.1 SCREWED ENDS B16.11 SOCKET WELD ENDS B16.25 BUTT WELD ENDS
MATERIALS OF CONSTRUCTION
NO. PART MATERIAL ASTM SPEC.
REMARKS
1 Body Forged Steel A182 Grade F22 Cl. 3
2 Seat Ring Cobalt-Chromium Super Alloy CoCr-A
3 Cover Forged Steel A182 Grade F22 Cl. 3
4 Disc Cobalt-Chromium Super Alloy CoCr-A
5 Spring Stainless Steel Type 302
6 Nameplate Aluminum
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size End To End Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 4-1/2 3-1/8 5-16 .555 .375 3-3/4 2.0
3/8 4-1/2 3-1/8 3/8 .690 .375 3-3/4 2.5
1/2 4-1/2 3-1/8 7/16 .855 .375 3-3/4 3.5
3/4 4-1/2 3-1/8 9/16 1.065 .500 3-3/4 5.6
1 5-7/16 3-3/4 13/16 1.330 .500 6-1/2 12.7
1-1/4 8-1/4 5-5/16 1-1/8 1.675 .500 15-1/2 26.0
1-1/2 8-1/4 5-5/16 1-1/4 1.915 .500 15-1/2 35.0
2 9-1/2 6-5/16 1-9/16 2.406 .625 24 46.0
FLOW
RP&C FORGED STEEL CHECK VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 14Y
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
K1350E SIZES 1/4” THRU 1-1/2” NPT (CLASS 2500)*
K1360E SIZES 1/4” THRU 2” SOCKET WELD
K1370E SIZES 1/4” THRU 2” BUTT WELD
• SPRING LOADED PISTON CHECK VALVES • HORIZONTAL OR VERTICAL SERVICE • FORGED STEEL ASTM A182 GRADE F22 Cl. 3
(2-1/4% Chrome 1% Moly)
• SEAL WELDED COVER
• REFER TO CHART ON PAGE 2Y FOR PRESSURE/TEMP. RATINGS
(NOT RECOMMENDED FOR PROLONGED USE ABOVE 1100 F°)
• CONFORMS TO THE APPLICABLE PARTS OF THE
FOLLOWING ASME/ANSI SPECIFICATIONS: B16.34 B31.3 B1.20.1 SCREWED ENDS B16.11 SOCKET WELD ENDS B16.25 BUTT WELD ENDS
MATERIALS OF CONSTRUCTION
NO. PART MATERIAL ASTM SPEC.
REMARKS
1 Body Forged Steel A182 Grade F22 Cl. 3
2 Seat Ring Cobalt-Chromium Super Alloy CoCr-A
3 Cover Forged Steel A182 Grade F22 Cl. 3
4 Disc Cobalt-Chromium Super Alloy CoCr-A
5 Spring Stainless Steel Type 302
6 Nameplate Aluminum
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size End To End Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 4-1/2 3-1/8 5-16 .555 .375 3-3/4 2.0
3/8 4-1/2 3-1/8 3/8 .690 .375 3-3/4 2.5
1/2 4-1/2 3-1/8 7/16 .855 .375 3-3/4 3.5
3/4 4-1/2 3-1/8 9/16 1.065 .500 3-3/4 5.6
1 5-7/16 3-3/4 13/16 1.330 .500 6-1/2 12.7
1-1/4 8-1/4 5-5/16 1-1/8 1.675 .500 15-1/2 26.0
1-1/2 8-1/4 5-5/16 1-1/4 1.915 .500 15-1/2 35.0
2 9-1/2 6-5/16 1-9/16 2.406 .625 24 46.0
FLOW
ASME B16.34 DOES NOT ALLOW FOR THREADED ENDS ABOVE CLASS 2500
RP&C FORGED STEEL CHECK VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 3C
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
S90A NPT ENDS SIZES ¼” THRU 2”
S91A SOCKET WELD ENDS
• FORGED STAINLESS STEEL • WORKING PRESSURE (NON-SHOCK)
600 PSIG @ 1200° F. Steam-Oil 800 PSIG @ 1130° F. Steam-Oil 1920 PSIG @ -20° To 100° F
HORIZONTAL SERVICE ONLY • ASTM A182 TYPE F316/F316L • STANDARD PORT • BOLTED COVER • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION A TRIM (316 SST) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Nameplate Aluminum
2 Cover Forged Stainless Steel A182 Type F316/F316L
3 Cover Bolts Alloy Steel A193 Grade B8M Cl. 2
4 * Gasket 316 SS/Grafoil® Spiral Wound
5 Disc 316 Stainless Steel A176 Grade 316
6 Body Forged Stainless Steel A182 Type F316/F316L
7 Seat 316 Stainless Steel Integral
* Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size End To End Center to Top(Open)
Port Dia. Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 3 2-3/16 9/32 .555 .375 3-1/4 .8
3/8 3 2-3/16 5/16 .690 .375 3-1/4 .9
1/2 3 2-3/16 3/8 .855 .375 3-1/4 1.0
3/4 3-1/2 2-7/16 ½ 1.065 .500 3-3/4 2.7
1 4-3/8 2-13/16 ¾ 1.330 .500 5-1/2 6.4
1-1/4 6 3-11/16 1 1.675 .500 11 14.0
1-1/2 6 3-11/16 1-1/4 1.915 .500 11 18.0
2 7 4-5/16 1-1/2 2.406 .625 14-1/2 24.0
FLOW
RP&C FORGED STEEL CHECK VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 10C
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
S98A NPT ENDS SIZES ¼” THRU 2”
S99A SOCKET WELD ENDS
HORIZONTAL SERVICE ONLY • STAINLESS STEEL, ASTM A182 Gr. F316/F316L • WORKING PRESSURE (NON-SHOCK)
600 PSIG @ 1200° F. Steam-Oil 800 PSIG @ 1130° F. Steam-Oil 1920 PSIG @ -20° To 100° F. • STOP/CHECK VALVE • STANDARD PORT • OS&Y – BOLTED BONNET • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION A TRIM (316 SST) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Nameplate Aluminum
2 Cover 316 Stainless Steel A182 Gr. F316/F316L
3 Cover Bolts Alloy Steel A193 Grade B8M Cl. 2
4 * Gasket 316 SS/Grafoil® Spiral Wound
5 Disc 316 Stainless Steel A276 Type 316
6 Disc Nut 303 Stainless Steel Grade 8F
7 Seat Ring 316 Stainless Steel A351 Type CF8M
8 Hinge Pin 316 Stainless Steel
9 Swing Arm 316 Stainless Steel A351 Type CF8M
10 Body 316 Stainless Steel A182 Gr. F316/F316L
* Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size End To End Center to Top(Open)
Port Dia. Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/2 3 2-3/16 25/64 .855 .375 3-1/4 5.1
3/4 3-1/2 2-7/16 ½ 1.065 .500 3-3/4 9.3
1 4-3/8 2-13/16 ¾ 1.330 .500 5-1/2 24.8
1-1/2 6 3-11/16 1-3/16 1.915 .500 11 70.9
2 7 4-5/16 1-15/32 2.406 .625 14-1/2 91.6
RP&C FORGED STEEL GLOBE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 4GL
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
C80D NPT ENDS SIZES ¼” THRU 2”
C81D SOCKET WELD ENDS
• ASTM A182 Gr. F5 • WORKING PRESSURE (NON-SHOCK)
600 PSIG @ 1615° F. Steam-Oil 800 PSIG @ 1355° F. Steam-Oil 2000 PSIG @ -20° To 100° F.
K80D NPT ENDS SIZES ¼” THRU 2”
K81D SOCKET WELD ENDS
• ASTM A182 Gr. F22 Cl. 3 • WORKING PRESSURE (NON-SHOCK)
600 PSIG @ 1615° F. Steam-Oil 800 PSIG @ 1355° F. Steam-Oil 2000 PSIG @ -20° To 100° F. • STANDARD PORT • OS&Y – BOLTED BONNET • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Nameplate Aluminum
4 Operating Nut 410 Stainless Steel A582
5 Stem 410 Stainless Steel A276
6 Gland Nuts 303 Stainless Steel A194 Grade 8F
7 Gland Flange Carbon Steel A108 Grade 1018
8 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
9 Eyebolt 410 Stainless Steel Hardened & Tempered
10 Eyebolt Washer Carbon Steel Grade 1018
11a * Packing Graphite Grafoil® (241 or equal)
11b * Wiper Rings Braided Graphite 1630GF or equal
12 Bonnet Bolts Alloy Steel A193 Grade B16
13 Bonnet Chrome Moly A182 Grade F5/F22
14 * Gasket 316 SS/Grafoil® Spiral Wound
15 Seat Cobalt-Chromium Super Alloy CoCr-A
16 Disc 420 Stainless Steel A582 Heat Treated
17 Body Chrome Moly A182 Grade F5/F22
18 Disc Nut 416 Stainless Steel A582
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Dia.
Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 4 3 6-1/4 9/32 .555 .375 4 2.3
3/8 4 3 6-1/4 25/64 .690 .375 4 5.7
1/2 4 3 6-1/4 25/64 .855 .375 4 5.1
3/4 4 3-1/2 6-1/2 ½ 1.065 .500 4-1/2 9.3
1 4-1/2 4-1/8 8-1/2 ¾ 1.330 .500 6-1/2 24.8
1-1/4 5-1/2 4-3/4 9-1/2 1-3/16 1.675 .500 13 67.8
1-1/2 5-1/2 4-3/4 9-1/2 1-3/16 1.915 .500 13 70.9
2 6-5/8 5-1/4 11-1/4 1-15/32 2.406 .625 18 91.6
FLOW
Disc Design 1 ¼” Thru 2”
RP&C FORGED STEEL GLOBE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 6GL
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
F180D CLASS 150 FLANGED
F380D CLASS 300 FLANGED
F680D CLASS 600 FLANGED • SIZES ½” THRU 2” • FORGED STEEL • ASTM A105N, LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – BOLTED BONNET • WORKING PRESSURE (NON-SHOCK)
CLASS 150 150 PSIG @ 576° F. Steam-Oil
285 PSIG @ -20° To 100° F. CLASS 300
300 PSIG @ 839° F. Steam-Oil 740 PSIG @ -20° To 100° F.
CLASS 600 600 PSIG @ 576° F. Steam-Oil 1480 PSIG @ -20° To 100° F.
• CONFORM TO THE APPLICABLE PARTS OF THE FOLLOWING SPECIFICATIONS:
API API 598 API 602
ASME/ANSI B1.20.1 B16.11 B16.34 B31.1 B31.3
NOTE: Valve can be furnished to meet NACE SPEC. MR0175. • MATERIALS OF CONSTRUCTION
D TRIM (13Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Nameplate Aluminum
4 Operating Nut Stainless Steel A276 Type 410
5 Stem Stainless Steel A276 Type 410
6 Gland Nuts 303 Stainless Steel A194 Grade 8F
7 Gland Flange Carbon Steel A108 Grade 1018
8 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
9 Eyebolt 410 Stainless Steel Hardened & Tempered
10 Eyebolt Washer Carbon Steel Grade 1018
11a * Packing Graphite Grafoil® (241 or equal)
11b * Wiper Rings Braided Graphite 1630GF or equal
12 Bonnet Bolts Alloy Steel A193 Grade B7
13 Bonnet Forged Steel, Normalized A015N Low Carbon
14 * Gasket 316 SS/Grafoil® Spiral Wound
15 Seat Cobalt-Chromium Super Alloy CoCr-A
16 Disc 420 Stainless Steel A582 Heat Treated
17 Body Forged Steel, Normalized A105N Low Carbon
18 Disc Nut 416 Stainless Steel A582
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Face To Face Approximate Weight Size
Handwheel Dia. 150 300 600
Center to Top(Open)
Port Dia. 150 300 600
Typical Cv Factors
½ 3-7/8 4-1/4 6 6-1/2 6-3/8 3/8 6-3/4 7 8 2.1
¾ 3-7/8 4-5/8 7 7-1/2 6-5/8 ½ 7-1/2 10 11 3.1
1 5-1/2 5 8 8-1/2 8-1/4 ¾ 11 14 15 7.0
1 ½ 5-1/2 6-1/2 9 9-1/2 9-1/4 1-1/4 19 24-1/2 26 18.1
2 6-1/2 8 10-1/2 11-1/2 11 1-1/2 30 38 40 25.2
FLOW
Disc Design 1 ¼” Thru 2”
RP&C FORGED STEEL GLOBE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 8GL
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
F180TF CLASS 150 FLANGED
F380TF CLASS 300 FLANGED
F680TF CLASS 600 FLANGED SIZES ¼” THRU 2”
(CHLORINE INSTITUE RECOMMENDS FLANGED ENDS FOR SIZES OVER 1-1/2” NPS)
FOR CHLORINE SERVICE • FORGED STEEL • ASTM A105, LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – BOLTED BONNET • WORKING PRESSURE (NON-SHOCK)
300 PSIG @ -20° To 300° F. (Class 150 is 230 PSIG @ -20° To 300° F.)
MAX. TEMPERATURE ALLOWABLE FOR CHLORINE SERVICE IS 300°F.
• CONFORM TO THE APPLICABLE PARTS OF THE FOLLOWING SPECIFICATIONS:
API API 598 API 602
ASME/ANSI B1.20.1 B16.11 B16.34 B31.1 B31.3
• MATERIALS OF CONSTRUCTION
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Nameplate Aluminum
4 Operating Nut 410 Stainless Steel A582
5 Stem Hastelloy “C” A276
6 Gland Nuts 303 Stainless Steel A194 Grade 8F
7 Gland Flange Carbon Steel A108 Grade 1018
8 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
9 Eyebolt 410 Stainless Steel Hardened & Tempered
10 Eyebolt Washer Carbon Steel Grade 1018
11a * Packing Teflon® Chevron Style
12 Bonnet Bolts Alloy Steel A193 Grade B7
13 Bonnet Forged Steel, Normalized A015N Low Carbon
14 * Gasket Monel/Teflon® Spiral Wound
15 Seat Monel Integral
16 Disc Monel/Teflon® Insert B164 Cl. B
17 Body Forged Steel, Normalized A105N Low Carbon
18 Disc Nut Monel B164 Cl. B
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602. This valve is designed to meet the service requirements of water free chlorine service.
The highest quality trim material is used assure trouble free operation in the paper mill and refinery industry. The body is equipped with an integral monel seat. The disc holder is monel with a TFE disc. The disc holder is designed to incorporate a metal-metal seal as a back-up for the TFE disc. TFE filled, monel spiral gasket and TFE, chevron packing are used for added sealing assurance.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Face To Face Approximate Weight Size
Handwheel Dia. 150 300 600
Center to Top(Open)
Port Dia. 150 300 600
Typical Cv Factors
½ 3-7/8 4-1/4 6 6-1/2 6-3/8 3/8 6-3/4 7 8 2.1
¾ 3-7/8 4-5/8 7 7-1/2 6-5/8 ½ 7-1/2 10 11 3.1
1 5-1/2 5 8 8-1/2 8-1/4 ¾ 11 14 15 7.0
1 ½ 5-1/2 6-1/2 9 9-1/2 9-1/4 1-1/4 19 24-1/2 26 18.1
2 6-1/2 8 10-1/2 11-1/2 11 1-1/2 30 38 40 25.2
FLOW MINIMUM QUANTITIES MAY BE REQUIRED
Disc Design 1 ¼” Thru 2”
RP&C VALVES – CLASS 1500
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 5 V15
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
F580E NPT ENDS
F581E SOCKET WELD ENDS
SIZES 1/2” THRU 2”
• FORGED STEEL GLOBE VALVE • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – BOLTED BONNET • WORKING PRESSURE (NON-SHOCK)
860 PSIG @ 900° F. Steam-Oil 1340 PSIG @ 850° F. Steam-Oil 3705 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
E TRIM (13 Cr/FHF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Nameplate Aluminum
4 Operating Nut 416 Stainless Steel A582
5 Stem 416 Stainless Steel A582
6 Gland Nuts 303 Stainless Steel A194 Grade 8F
7 Gland Plate Forged Carbon Steel A105
8 Gland Carbon Steel B484 Gr. 2, Cl. C, Type 1
9 Eyebolt 410 Stainless Steel Hardened & Tempered
10 Eyebolt Washer Stainless Steel 300 Series
11 * Packing Graphite Grafoil® (241 or equal)
11a * Wiper Rings Braided Graphite 1630GF or equal
12 Bonnet Bolts Alloy Steel A193 Grade B7
13 Bonnet Forged Steel, Normalized A015N Low Carbon
14 * Gasket 316 SS/Grafoil® Spiral Wound
15 Seat Cobalt-Chromium Super Alloy CoCr-A
16 Disc Cobalt-Chromium Super Alloy CoCr-A
17 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/2 4-1/2 4 8-1/4 25/64 .855 .375 7-1/4 2.1
3/4 4-1/2 4 8-1/4 1/2 1.065 .500 8-1/4 3.1
1 5-1/2 5-1/2 9 3/4 1.330 .500 13-1/4 7.0
1-1/2 6-5/8 6-1/2 10-5/8 1-3/16 1.915 .500 24-3/4 18.1
2 8-1/4 7 12-1/4 1-15/32 2.406 .625 39-1/2 25.2
RP&C FORGED STEEL GLOBE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 1GL
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
F80D NPT ENDS SIZES ¼” THRU 2”
F81D SOCKET WELD ENDS
• FORGED STEEL • ASTM A105, LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – BOLTED BONNET • WORKING PRESSURE (NON-SHOCK)
460 PSIG @ 900° F. Steam-Oil 715 PSIG @ 850° F. Steam-Oil 1975 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Nameplate Aluminum
4 Operating Nut Stainless Steel A276 Type 410
5 Stem Stainless Steel A276 Type 410
6 Gland Nuts 303 Stainless Steel A194 Grade 8F
7 Gland Flange Carbon Steel A108 Grade 1018
8 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
9 Eyebolt 410 Stainless Steel Hardened & Tempered
10 Eyebolt Washer Carbon Steel Grade 1018
11a * Packing Graphite Grafoil® (241 or equal)
11b * Wiper Rings Braided Graphite 1630GF or equal
12 Bonnet Bolts Alloy Steel A193 Grade B7
13 Bonnet Forged Steel, Normalized A015N Low Carbon
14 * Gasket 316 SS/Grafoil® Spiral Wound
15 Seat Cobalt-Chromium Super Alloy CoCr-A
16 Disc 420 Stainless Steel A582 Heat Treated
17 Body Forged Steel, Normalized A105N Low Carbon
18 Disc Nut 416 Stainless Steel A582
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Dia.
Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 3-7/8 3 6-3/8 9/32 .555 .375 4 1.1
3/8 3-7/8 3 6-3/8 5/16 .690 .375 4 1.6
1/2 3-7/8 3 6-3/8 3/8 .855 .375 4 2.1
3/4 3-7/8 3-1/2 6-5/8 ½ 1.065 .500 4-1/2 3.1
1 5-1/2 4-3/8 8-1/4 ¾ 1.330 .500 7 7.0
1-1/4 5-1/2 6 9-1/4 1 1.675 .500 14 15.4
1-1/2 5-1/2 6 9-1/4 1-1/4 1.915 .500 13-1/2 18.1
2 6-1/2 7 11 1-1/2 2.406 .625 19 25.2
FLOW
Disc Design 1 ¼” Thru 2” Disc Design 1 ¼” Thru 2”
RP&C VALVES – CLASS 1500
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 6 V15
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
FWB580E NPT ENDS
FWB581E SOCKET WELD ENDS
SIZES 1/2” THRU 2” • FORGED STEEL GLOBE VALVE • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – WELDED BONNET • WORKING PRESSURE (NON-SHOCK)
860 PSIG @ 900° F. Steam-Oil 1340 PSIG @ 850° F. Steam-Oil 3705 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION E TRIM (13 Cr/FHF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Nameplate Aluminum
4 Operating Nut 416 Stainless Steel A582
5 Stem 416 Stainless Steel A582
6 Gland Nuts 303 Stainless Steel A194 Grade 8F
7 Gland Plate Forged Carbon Steel A105
8 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
9 Eyebolt 410 Stainless Steel Hardened & Tempered
10 Eyebolt Washer Stainless Steel 300 Series
11 * Packing Graphite Grafoil® (241 or equal)
11a * Wiper Rings Braided Graphite 1630GF or equal
12 Bonnet Forged Steel, Normalized A015N Low Carbon
13 Seat Cobalt-Chromium Super Alloy CoCr-A
14 Disc Cobalt-Chromium Super Alloy CoCr-A
15 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/2 4-1/2 4 8-1/4 25/64 .855 .375 7-1/4 2.1
3/4 4-1/2 4 8-1/4 1/2 1.065 .500 8-1/4 3.1
1 5-1/2 5-1/2 9 3/4 1.330 .500 13-1/4 7.0
1-1/2 6-5/8 6-1/2 10-5/8 1-3/16 1.915 .500 24-3/4 18.1
2 8-1/4 7 12-1/4 1-15/32 2.406 .625 39-1/2 25.2
RP&C FORGED STEEL GLOBE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 2GL
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
FWB80D NPT ENDS SIZES ¼” THRU 2”
FWB81D SOCKET WELD ENDS
• FORGED STEEL • ASTM A105, LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – WELDED BONNET • WORKING PRESSURE (NON-SHOCK)
460 PSIG @ 900° F. Steam-Oil 715 PSIG @ 850° F. Steam-Oil 1975 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Nameplate Aluminum
4 Operating Nut Stainless Steel A276 Type 410
5 Stem Stainless Steel A276 Type 410
6 Gland Nuts 303 Stainless Steel A194 Grade 8F
7 Gland Flange Carbon Steel A108 Grade 1018
8 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
9 Eyebolt 410 Stainless Steel Hardened & Tempered
10 Eyebolt Washer Carbon Steel Grade 1018
11a * Packing Graphite Grafoil® (241 or equal)
11b * Wiper Rings Braided Graphite 1630GF or equal
12 Bonnet Forged Steel, Normalized A105N Low Carbon
13 Seat Cobalt-Chromium Super Alloy CoCr-A
14 Disc 420 Stainless Steel A582 Heat Treated
15 Body Forged Steel, Normalized A105N Low Carbon
16 Disc Nut 416 Stainless Steel A582
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Dia.
Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 3-7/8 3 6-3/8 9/32 .555 .375 4 1.1
3/8 3-7/8 3 6-3/8 5/16 .690 .375 4 1.6
1/2 3-7/8 3 6-3/8 3/8 .855 .375 4 2.1
3/4 3-7/8 3-1/2 6-5/8 ½ 1.065 .500 4-1/2 3.1
1 5-1/2 4-3/8 8-1/4 ¾ 1.330 .500 7 7.0
1-1/4 5-1/2 6 9-1/4 1 1.675 .500 14 15.4
1-1/2 5-1/2 6 9-1/4 1-1/4 1.915 .500 13-1/2 18.1
2 6-1/2 7 11 1-1/2 2.406 .625 19 25.2
FLOW
Disc Design 1 ¼” Thru 2”
RP&C FORGED STEEL GLOBE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 4Y
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
K1200E SIZES 1/4” THRU 1-1/2” NPT
K1210E SIZES 1/4” THRU 2-1/2” SOCKET WELD
K1220E SIZES 1/4” THRU 4” BUTT WELD
• FORGED STEEL ASTM A182 Gr. F22 Cl. 3
(2-1/4% Chrome, 1% Moly) • OS&Y GLOBE VALVE, INCLINED STEM • INTEGRAL BACKSEAT • SEAL WELDED BONNET • REFER TO CHART ON PAGE 2Y FOR PRESSURE/TEMP. RATINGS
(NOT RECOMMENDED FOR PROLONGED USE ABOVE 1100 F°) • CONFORMS TO THE APPLICABLE PARTS OF THE
FOLLOWING ASME/ANSI SPECIFICATIONS: B16.34 B31.3 B1.20.1 SCREWED ENDS B16.11 SOCKET WELD ENDS B16.25 BUTT WELD ENDS
MATERIALS OF CONSTRUCTION
NO. PART MATERIAL ASTM SPEC.
REMARKS
1 Body Forged Steel A182 Grade F22 Cl. 3
2 Seat Ring Cobalt-Chromium Super Alloy CoCr-A
3 Bonnet Forged Steel A182 Grade F22 Cl. 3
4 Operating Nut Bronze B150 Alloy 642
5 Gland Stainless Steel A582 Type 416
6 Gland Flange Alloy Steel A29 Grade 4140
7a * Packing Grafoil ® Crane 241
7b * Wiper rings Graphite Yarn Crane 1625GF
416 Stainless Steel A582 Stem 8 Stem Assembly
CoCr-A Disc
9 Eyebolt Alloy Steel A193 Grade B7
10 Eyebolt Pin Alloy Steel A29 Grade 4140
11 Gland Nut Steel A194 Grade 2H
12 Handwheel Malleable Iron A47 Grade 32510
13 Nameplate Aluminum
14 Handwheel Nut Steel A108 Zinc Plated
* RECOMMENDED SPARE PARTS Round handwheels are standard thru 1”. Impactor handles are standard on 1-1/4” and larger.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 6-1/2 4-1/2 9-5/32 5-16 .555 .375 9-1/2 2.0
3/8 6-1/2 4-1/2 9-5/32 3/8 .690 .375 9-1/2 2.5
1/2 6-1/2 4-1/2 9-5/32 7/16 .855 .375 9-1/2 3.5
3/4 6-1/2 5-7/16 11-5/32 9/16 1.065 .500 15-3/4 5.6
1 7-3/8 5-7/16 11-5/32 13/16 1.330 .500 15-3/4 12.7
1-1/4 13-1/2 8-1/4 14-29/32 1-1/8 1.675 .500 39 26.0
1-1/2 13-1/2 8-1/4 14-29/32 1-1/4 1.915 .500 39 35.0
2 13-1/2 9-1/2 17-1/16 1-9/16 2.406 .625 65-1/2 46.0
2-1/2” 20 12-3/4 25-5/8 2 -- -- 180 95.0
3” & 4” 20 12-3/4 25-5/8 2 -- -- 180 95.0
FLOW
RP&C FORGED STEEL GLOBE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 6Y
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
K1202E SIZES 1/4” THRU 1-1/2” NPT
K1212E SIZES 1/4” THRU 2-1/2” SOCKET WELD
K1222E SIZES 1/4” THRU 4” BUTT WELD
• FORGED STEEL ASTM A182 Gr. F22 Cl. 3 (2-1/4% Chrome, 1% Moly)
• OS&Y GLOBE VALVE, INCLINED STEM • LOOSE BACKSEAT • SEAL WELDED BONNET • REFER TO CHART ON PAGE 2Y FOR PRESSURE/TEMP. RATINGS
(NOT RECOMMENDED FOR PROLONGED USE ABOVE 1100 F°) • CONFORMS TO THE APPLICABLE PARTS OF THE
FOLLOWING ASME/ANSI SPECIFICATIONS: B16.34 B31.3 B1.20.1 SCREWED ENDS B16.11 SOCKET WELD ENDS B16.25 BUTT WELD ENDS
MATERIALS OF CONSTRUCTION
NO. PART MATERIAL ASTM SPEC.
REMARKS
1 Body Forged Steel A182 Grade F22 Cl. 3
2 Seat Ring Cobalt-Chromium Super Alloy CoCr-A
3 Bonnet Forged Steel A182 Grade F22 Cl. 3
4 Operating Nut Bronze B150 Alloy 642
5 Gland Stainless Steel A582 Type 416
6 Gland Flange Alloy Steel A29 Grade 4140
7a * Packing Grafoil ® Crane 241
7b * Wiper rings Graphite Yarn Crane 1625GF
416 Stainless Steel A582 Stem 8 Stem Assembly
CoCr-A Disc
9 Eyebolt Alloy Steel A193 Grade B7
10 Eyebolt Pin Alloy Steel A29 Grade 4140
11 Gland Nut Steel A194 Grade 2H
12 Handwheel Malleable Iron A47 Grade 32510
13 Nameplate Aluminum
14 Handwheel Nut Steel A108 Zinc Plated
15 * Loose Backseat Stainless Steel A582 Type 416
16 Retainer Stainless Steel A582 Type 416
* RECOMMENDED SPARE PARTS Round handwheels are standard thru 1”. Impactor handles are standard on 1-1/4” and larger.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 6-1/2 4-1/2 9-5/32 5-16 .555 .375 9-1/2 2.0
3/8 6-1/2 4-1/2 9-5/32 3/8 .690 .375 9-1/2 2.5
1/2 6-1/2 4-1/2 9-5/32 7/16 .855 .375 9-1/2 3.5
3/4 6-1/2 5-7/16 11-5/32 9/16 1.065 .500 15-3/4 5.6
1 7-3/8 5-7/16 11-5/32 13/16 1.330 .500 15-3/4 12.7
1-1/4 13-1/2 8-1/4 14-29/32 1-1/8 1.675 .500 39 26.0
1-1/2 13-1/2 8-1/4 14-29/32 1-1/4 1.915 .500 39 35.0
2 13-1/2 9-1/2 17-1/16 1-9/16 2.406 .625 65-1/2 46.0
2-1/2” 20 12-3/4 25-5/8 2 -- -- 180 95.0
3” & 4” 20 12-3/4 25-5/8 2 -- -- 180 95.0
RP&C FORGED STEEL GLOBE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 8Y
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
K1250E SIZES 1/4” THRU 1-1/2” NPT (CLASS 2500)*
K1260E SIZES 1/4” THRU 2-1/2” SOCKET WELD
K1270E SIZES 1/4” THRU 3” BUTT WELD
• FORGED STEEL ASTM A182 Gr. F22 Cl. 3
(2-1/4% Chrome, 1% Moly) • OS&Y GLOBE VALVE, INCLINED STEM • INTEGRAL BACKSEAT • SEAL WELDED BONNET • REFER TO CHART ON PAGE 2Y FOR PRESSURE/TEMP. RATINGS
(NOT RECOMMENDED FOR PROLONGED USE ABOVE 1100 F°) • CONFORMS TO THE APPLICABLE PARTS OF THE
FOLLOWING ASME/ANSI SPECIFICATIONS: B16.34 B31.3 B1.20.1 SCREWED ENDS B16.11 SOCKET WELD ENDS B16.25 BUTT WELD ENDS
MATERIALS OF CONSTRUCTION
NO. PART MATERIAL ASTM SPEC.
REMARKS
1 Body Forged Steel A182 Grade F22 Cl. 3
2 Seat Ring Cobalt-Chromium Super Alloy CoCr-A
3 Bonnet Forged Steel A182 Grade F22 Cl. 3
4 Operating Nut Bronze B150 Alloy 642
5 Gland Stainless Steel A582 Type 416
6 Gland Flange Alloy Steel A29 Grade 4140
7a * Packing Grafoil ® Crane 241
7b * Wiper rings Graphite Yarn Crane 1625GF
416 Stainless Steel A582 Stem 8 Stem Assembly
CoCr-A Disc
9 Eyebolt Alloy Steel A193 Grade B7
10 Eyebolt Pin Alloy Steel A29 Grade 4140
11 Gland Nut Steel A194 Grade 2H
12 Handwheel Malleable Iron A47 Grade 32510
13 Nameplate Aluminum
14 Handwheel Nut Steel A108 Zinc Plated
* RECOMMENDED SPARE PARTS Round handwheels are standard thru 1”. Impactor handles are standard on 1-1/4” and larger.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 6-1/2 4-1/2 9-5/32 5-16 .555 .375 9-1/2 2.0
3/8 6-1/2 4-1/2 9-5/32 3/8 .690 .375 9-1/2 2.5
1/2 6-1/2 4-1/2 9-5/32 7/16 .855 .375 9-1/2 3.5
3/4 6-1/2 5-7/16 11-5/32 9/16 1.065 .500 15-3/4 5.6
1 7-3/8 5-7/16 11-5/32 13/16 1.330 .500 15-3/4 12.7
1-1/4 13-1/2 8-1/4 14-29/32 1-1/8 1.675 .500 39 26.0
1-1/2 13-1/2 8-1/4 14-29/32 1-1/4 1.915 .500 39 35.0
2 13-1/2 9-1/2 17-1/16 1-9/16 2.406 .625 65-1/2 46.0
2-1/2” 20 12-3/4 25-5/8 2 -- -- 180 95.0
3” & 4” 20 12-3/4 25-5/8 2 -- -- 180 95.0
FLOW
ASME B16.34 DOES NOT ALLOW FOR THREADED ENDS ABOVE CLASS 2500
RP&C FORGED STEEL GLOBE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 10Y
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
K1252E SIZES 1/4” THRU 1-1/2” NPT (CLASS 2500)*
K1262E SIZES 1/4” THRU 2-1/2” SOCKET WELD
K1272E SIZES 1/4” THRU 3” BUTT WELD
• FORGED STEEL ASTM A182 Gr. F22 Cl. 3
(2-1/4% Chrome, 1% Moly) • OS&Y GLOBE VALVE, INCLINED STEM • LOOSE BACKSEAT • SEAL WELDED BONNET • REFER TO CHART ON PAGE 2Y FOR PRESSURE/TEMP. RATINGS
(NOT RECOMMENDED FOR PROLONGED USE ABOVE 1100 F°) • CONFORMS TO THE APPLICABLE PARTS OF THE
FOLLOWING ASME/ANSI SPECIFICATIONS: B16.34 B31.3 B1.20.1 SCREWED ENDS B16.11 SOCKET WELD ENDS B16.25 BUTT WELD ENDS
MATERIALS OF CONSTRUCTION
NO. PART MATERIAL ASTM SPEC.
REMARKS
1 Body Forged Steel A105
2 Seat Ring Cobalt-Chromium Super Alloy CoCr-A
3 Bonnet Forged Steel A105
4 Operating Nut Bronze B150 Alloy 642
5 Gland Stainless Steel A582 Type 416
6 Gland Flange Alloy Steel A29 Grade 4140
7a * Packing Grafoil ® Crane 241
7b * Wiper rings Graphite Yarn Crane 1625GF
416 Stainless Steel A582 Stem 8 Stem Assembly
CoCr-A Disc
9 Eyebolt Alloy Steel A193 Grade B7
10 Eyebolt Pin Alloy Steel A29 Grade 4140
11 Gland Nut Steel A194 Grade 2H
12 Handwheel Malleable Iron A47 Grade 32510
13 Nameplate Aluminum
14 Handwheel Nut Steel A108 Zinc Plated
15 * Loose Backseat Stainless Steel A582 Type 416
16 Retainer Stainless Steel A582 Type 416
* RECOMMENDED SPARE PARTS Round handwheels are standard thru 1”. Impactor handles are standard on 1-1/4” and larger.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 6-1/2 4-1/2 9-5/32 5-16 .555 .375 9-1/2 2.0
3/8 6-1/2 4-1/2 9-5/32 3/8 .690 .375 9-1/2 2.5
½ 6-1/2 4-1/2 9-5/32 7/16 .855 .375 9-1/2 3.5
¾ 6-1/2 5-7/16 11-5/32 9/16 1.065 .500 15-3/4 5.6
1 7-3/8 5-7/16 11-5/32 13/16 1.330 .500 15-3/4 12.7
1-1/4 13-1/2 8-1/4 14-29/32 1-1/8 1.675 .500 39 26.0
1-1/2 13-1/2 8-1/4 14-29/32 1-1/4 1.915 .500 39 35.0
2 13-1/2 9-1/2 17-1/16 1-9/16 2.406 .625 65-1/2 46.0
2-1/2” 20 12-3/4 25-5/8 2 -- -- 180 95.0
3” & 4” 20 12-3/4 25-5/8 2 -- -- 180 95.0
ASME B16.34 DOES NOT ALLOW FOR THREADED ENDS ABOVE CLASS 2500
RP&C FORGED STEEL GLOBE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 3GL
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
LF80D NPT ENDS SIZES ¼” THRU 2”
LF81D SOCKET WELD ENDS
• FORGED STEEL • ASTM A350 Gr. LF2 • STANDARD PORT • OS&Y – BOLTED BONNET • WORKING PRESSURE (NON-SHOCK)
1100 PSIG @ 800° F. Steam-Oil 1975 PSIG @ -20° To 100° F
800°F. IS MAX. OPERATING TEMP. FOR LF2 • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Nameplate Aluminum
4 Operating Nut Stainless Steel A276 Type 410
5 Stem Stainless Steel A276 Type 410
6 Gland Nuts 303 Stainless Steel A194 Grade 8F
7 Gland Flange Carbon Steel A108 Grade 1018
8 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
9 Eyebolt 410 Stainless Steel Hardened & Tempered
10 Eyebolt Washer Carbon Steel Grade 1018
11a * Packing Graphite Grafoil® (241 or equal)
11b * Wiper Rings Braided Graphite 1630GF or equal
12 Bonnet Bolts Alloy Steel A193 Grade B8M Cl.2
13 Bonnet Forged Steel A350 Gr. LF2
14 * Gasket 316 SS/Grafoil® Spiral Wound
15 Seat Cobalt-Chromium Super Alloy CoCr-A
16 Disc 420 Stainless Steel A582 Heat Treated
17 Body Forged Steel A350 Gr. LF2
18 Disc Nut 416 Stainless Steel A582
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Dia.
Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 3-7/8 3 6-3/8 9/32 .555 .375 4 1.1
3/8 3-7/8 3 6-3/8 5/16 .690 .375 4 1.6
1/2 3-7/8 3 6-3/8 3/8 .855 .375 4 2.1
3/4 3-7/8 3-1/2 6-5/8 ½ 1.065 .500 4-1/2 3.1
1 5-1/2 4-3/8 8-1/4 ¾ 1.330 .500 7 7.0
1-1/4 5-1/2 6 9-1/4 1 1.675 .500 14 15.4
1-1/2 5-1/2 6 9-1/4 1-1/4 1.915 .500 13-1/2 18.1
2 6-1/2 7 11 1-1/2 2.406 .625 19 25.2
FLOW
Disc Design 1 ¼” Thru 2”
RP&C FORGED STEEL GATE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 2G
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
EFO56D NPT ENDS SIZES ¼” THRU 2”
EFO57D SOCKET WELD ENDS
• FORGED STEEL • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • FULL PORT • OS&Y – BOLTED BONNET • WORKING PRESSURE (NON-SHOCK)
460 PSIG @ 900° F. Steam-Oil 715 PSIG @ 850° F. Steam-Oil 1975 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 410 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Flange Carbon Steel A108 Grade 1018
10 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
11 Eyebolt 410 Stainless Steel Hardened & Tempered
12 Eyebolt Washer Carbon Steel Grade 1018
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Bolts Alloy Steel A193 Grade B7
15 Bonnet Forged Steel, Normalized A015N Low Carbon
16 * Gasket 316 SS/Grafoil® Spiral Wound
17 Seat Rings 410 Stainless Steel A276 Hard Faced
18 Wedge CA-15 Stainless Steel A217 Heat Treated
19 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel
Dia. End To
End Center to Top(Open)
Port Socket Weld
Bore Socket Weld
Depth Approximate
Weight Typical Cv
Factors
1/4 4 3 6-1/4 9/32 .555 .375 4 2.3
3/8 4 3 6-1/4 25/64 .690 .375 4 5.7
1/2 4 3-1/2 6-1/2 1/2 .855 .375 4-1/2 9.3
3/4 4-1/2 4-1/8 8-1/2 3/4 1.065 .500 6-1/2 24.8
1 5-1/2 4-3/4 9-1/2 1” 1.330 .500 13 67.8
1-1/4 5-1/2 4-3/4 9-1/2 1-3/16 1.675 .500 13-1/2 70.9
1-1/2 6-5/8 5-1/4 11-1/4 1-15/32 1.915 .500 18-1/2 91.6
2 8-3/8 5-5/8 13 2” 2.406 .625 25-1/2 200.0
RP&C FORGED STEEL GATE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 8G
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
EF158D CLASS 150 FLANGED EF308D CLASS 300 FLANGED
EF608D CLASS 600 FLANGED • SIZES ¼” THRU 2” • FORGED STEEL • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – BOLTED BONNET
• WORKING PRESSURE (NON-SHOCK) CLASS 150
150 PSIG @ 576° F. Steam-Oil 285 PSIG @ -20° To 100° F.
CLASS 300 300 PSIG @ 839° F. Steam-Oil
740 PSIG @ -20° To 100° F. CLASS 600
600 PSIG @ 576° F. Steam-Oil 1480 PSIG @ -20° To 100° F.
• CONFORM TO THE APPLICABLE PARTS OF THE FOLLOWING SPECIFICATIONS:
API API 591 API 598 API 602
ASME/ANSI B1.20.1 B16.11 B16.34 B31.1 B31.3
NOTE: Valve can be furnished to meet NACE SPEC. MR0175. • MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 410 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Flange Carbon Steel A108 Grade 1018
10 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
11 Eyebolt 410 Stainless Steel Hardened & Tempered
12 Eyebolt Washer Carbon Steel Grade 1018
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Bolts Alloy Steel A193 Grade B7
15 Bonnet Forged Steel, Normalized A015N Low Carbon
16 * Gasket 316 SS/Grafoil® Spiral Wound
17 Seat Rings 410 Stainless Steel A276 Hard Faced
18 Wedge CA-15 Stainless Steel A217 Heat Treated
19 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
End To End Approximate Weight Size Handwheel Dia. 150 300 600
Center to Top(Open)
Port 150 300 600
Typical Cv Factors
1/2 4 4-1/4 5-1/2 6-1/2 6-1/4 25/64 6-3/4 7-1/2 8 5.1
3/4 4 4-5/8 6 7-1/2 6-1/2 1/2 7-1/2 10 11 9.3
1 4-1/2 5 6-1/2 8-1/2 8-1/2 3/4 11 12 13 24.8
1-1/2 5-1/2 6-1/2 7-1/2 9-1/2 9-1/2 1-3/16 19 23 27 67.8
2 6-5/8 7 8-1/2 11-1/2 11-1/4 1-15/32 29 36 39 70.9
3 8-3/8 8 11-1/8 14 13 2 50 63 68 91.6
NOTE: Class 150 Flanged valves feature integrallyforged flanges.
RP&C FORGED STEEL GATE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 9G
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
EF46D MALE COUPLET X FEMALE SOCKET WELD
EF51D MALE X FEMALE NPT
EF52D MALE X FEMALE SOCKET WELD
EF53D MALE NPT X FEMALE SOCKET WELD
EF54D MALE SOCKET WELD X FEMALE NPT
EF55D MALE COUPLET X FEMALE NPT
• SIZES 1/2” THRU 11/2” NOTE: 1/2” MALE THREADS ARE NOT COVERED BY API 602
• FORGED STEEL • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – BOLTED BONNET • WORKING PRESSURE (NON-SHOCK)
460 PSIG @ 900° F. Steam-Oil 715 PSIG @ 850° F. Steam-Oil 1975 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 410 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Flange Carbon Steel A108 Grade 1018
10 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
11 Eyebolt 410 Stainless Steel Hardened & Tempered
12 Eyebolt Washer Carbon Steel Grade 1018
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Bolts Alloy Steel A193 Grade B7
15 Bonnet Forged Steel, Normalized A015N Low Carbon
16 * Gasket 316 SS/Grafoil® Spiral Wound
17 Seat Rings 410 Stainless Steel A276 Hard Faced
18 Wedge CA-15 Stainless Steel A217 Heat Treated
19 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/2 4 5-9/16 6-1/4 25/64 .855 .375 4-1/2 5.1
3/4 4 6 6-1/2 1/2 1.065 .500 4-3/4 9.3
1 4-1/2 6-5/16 8-1/2 3/4 1.330 .500 6-3/4 24.8
1-1/2 5-1/2 7-7/16 9-1/2 1-1/4 1.915 .500 14 70.9
MINIMUM QUANTITIES MAY BE REQUIRED
RP&C FORGED STEEL GATE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 11G
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
MINIMUM QUANTITIES MAY BE REQUIRED
EF48D MALE SOCKET WELD X FEMALE NPT
EF49D MALE X FEMALE SOCKET WELD
• INTEGRALLY REINFORCED MALE END • SIZES 1/2” THRU 2” • FORGED STEEL • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – BOLTED BONNET • WORKING PRESSURE (NON-SHOCK)
460 PSIG @ 900° F. Steam-Oil 715 PSIG @ 850° F. Steam-Oil 1975 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 410 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Flange Carbon Steel A108 Grade 1018
10 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
11 Eyebolt 410 Stainless Steel Hardened & Tempered
12 Eyebolt Washer Carbon Steel Grade 1018
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Bolts Alloy Steel A193 Grade B7
15 Bonnet Forged Steel, Normalized A015N Low Carbon
16 * Gasket 316 SS/Grafoil® Spiral Wound
17 Seat Rings 410 Stainless Steel A276 Hard Faced
18 Wedge CA-15 Stainless Steel A217 Heat Treated
19 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/2 4 7-5/8 6-1/4 25/64 .855 .375 5-1/2 5.1
3/4 4 8-11/16 6-1/2 1/2 1.065 .500 6-1/2 9.3
1 4-1/2 9-11/16 8-1/2 3/4 1.330 .500 10 24.8
1-1/2 5-1/2 10-3/8 9-1/2 1-1/4 1.915 .500 16 70.9
2 6-5/8 11-7/8 11-1/4 1-15/32 2.406 .625 24 91.6
RP&C VALVES – CLASS 1500
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 3 V15
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
EF556E NPT ENDS
EF557E SOCKET WELD ENDS
SIZES 1/2” THRU 2”
• FORGED STEEL GATE VALVE • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – BOLTED BONNET • WORKING PRESSURE (NON-SHOCK)
860 PSIG @ 900° F. Steam-Oil 1340 PSIG @ 850° F. Steam-Oil 3705 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
E TRIM (13 Cr/FHF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 410 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Plate Forged Carbon Steel A105
10 Gland Carbon Steel B484 Gr. 2, Cl. C, Type 1
11 Eyebolt 410 Stainless Steel Hardened & Tempered
12 Eyebolt Washer Stainless Steel 300 Series
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Bolts Alloy Steel A193 Grade B7
15 Bonnet Forged Steel, Normalized A015N Low Carbon
16 * Gasket 316 SS/Grafoil® Spiral Wound
17 Seat Rings 410 Stainless Steel A276 Hard Faced
18 Wedge Cobalt-Chromium Super Alloy CoCr-A
19 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/2 4-1/2 4 8-1/4 1/2 .855 .375 7-1/4 6.9
3/4 4-1/2 4 8-1/4 1/2 1.065 .500 8-1/4 12.7
1 5-1/2 5-1/2 9 3/4 1.330 .500 13-1/4 31.6
1-1/2 6-5/8 6-1/2 10-5/8 1-3/16 1.915 .500 24-3/4 71.1
2 8-1/4 7 12-1/4 1-15/32 2.406 .625 39-1/2 112.9
RP&C FORGED STEEL GATE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 1G
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
EF56D NPT ENDS SIZES ¼” THRU 2”
EF57D SOCKET WELD ENDS
• FORGED STEEL • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – BOLTED BONNET • WORKING PRESSURE (NON-SHOCK)
460 PSIG @ 900° F. Steam-Oil 715 PSIG @ 850° F. Steam-Oil 1975 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 410 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Flange Carbon Steel A108 Grade 1018
10 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
11 Eyebolt 410 Stainless Steel Hardened & Tempered
12 Eyebolt Washer Carbon Steel Grade 1018
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Bolts Alloy Steel A193 Grade B7
15 Bonnet Forged Steel, Normalized A015N Low Carbon
16 * Gasket 316 SS/Grafoil® Spiral Wound
17 Seat Rings 410 Stainless Steel A276 Hard Faced
18 Wedge CA-15 Stainless Steel A217 Heat Treated
19 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem Thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 4 3 6-1/4 9/32 .555 .375 4 2.3
3/8 4 3 6-1/4 25/64 .690 .375 4 5.7
1/2 4 3 6-1/4 25/64 .855 .375 4 5.1
3/4 4 3-1/2 6-1/2 1/2 1.065 .500 4-1/2 9.3
1 4-1/2 4-1/8 8-1/2 3/4 1.330 .500 6-1/2 24.8
1-1/4 5-1/2 4-3/4 9-1/2 1-3/16 1.675 .500 13 67.8
1-1/2 5-1/2 4-3/4 9-1/2 1-3/16 1.915 .500 13 70.9
2 6-5/8 5-1/4 11-1/4 1-15/32 2.406 .625 18 91.6
RP&C FORGED STEEL GATE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 8G
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
EF158D CLASS 150 FLANGED EF308D CLASS 300 FLANGED
EF608D CLASS 600 FLANGED • SIZES ¼” THRU 2” • FORGED STEEL • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – BOLTED BONNET
• WORKING PRESSURE (NON-SHOCK) CLASS 150
150 PSIG @ 576° F. Steam-Oil 285 PSIG @ -20° To 100° F.
CLASS 300 300 PSIG @ 839° F. Steam-Oil
740 PSIG @ -20° To 100° F. CLASS 600
600 PSIG @ 576° F. Steam-Oil 1480 PSIG @ -20° To 100° F.
• CONFORM TO THE APPLICABLE PARTS OF THE FOLLOWING SPECIFICATIONS:
API API 591 API 598 API 602
ASME/ANSI B1.20.1 B16.11 B16.34 B31.1 B31.3
NOTE: Valve can be furnished to meet NACE SPEC. MR0175. • MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 410 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Flange Carbon Steel A108 Grade 1018
10 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
11 Eyebolt 410 Stainless Steel Hardened & Tempered
12 Eyebolt Washer Carbon Steel Grade 1018
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Bolts Alloy Steel A193 Grade B7
15 Bonnet Forged Steel, Normalized A015N Low Carbon
16 * Gasket 316 SS/Grafoil® Spiral Wound
17 Seat Rings 410 Stainless Steel A276 Hard Faced
18 Wedge CA-15 Stainless Steel A217 Heat Treated
19 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
End To End Approximate Weight Size Handwheel Dia. 150 300 600
Center to Top(Open)
Port 150 300 600
Typical Cv Factors
1/2 4 4-1/4 5-1/2 6-1/2 6-1/4 25/64 6-3/4 7-1/2 8 5.1
3/4 4 4-5/8 6 7-1/2 6-1/2 1/2 7-1/2 10 11 9.3
1 4-1/2 5 6-1/2 8-1/2 8-1/2 3/4 11 12 13 24.8
1-1/2 5-1/2 6-1/2 7-1/2 9-1/2 9-1/2 1-3/16 19 23 27 67.8
2 6-5/8 7 8-1/2 11-1/2 11-1/4 1-15/32 29 36 39 70.9
3 8-3/8 8 11-1/8 14 13 2 50 63 68 91.6
NOTE: Class 150 Flanged valves feature integrallyforged flanges.
RP&C FORGED STEEL GATE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 10G
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
EFWB46D MALE COUPLET X FEMALE SOCKET WELD
EFWB51D MALE X FEMALE NPT
EFWB52D MALE X FEMALE SOCKET WELD
EFWB53D MALE NPT X FEMALE SOCKET WELD
EFWB54D MALE SOCKET WELD X FEMALE NPT
EFWB55D MALE COUPLET X FEMALE NPT
• SIZES 1/2” THRU 11/2” NOTE: 1/2” MALE THREADS ARE NOT COVERED BY API 602
• FORGED STEEL • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • CONVENTIONAL PORT • OS&Y – WELDED BONNET • WORKING PRESSURE (NON-SHOCK)
460 PSIG @ 900° F. Steam-Oil 715 PSIG @ 850° F. Steam-Oil 1975 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 410 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Flange Carbon Steel A108 Grade 1018
10 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
11 Eyebolt 410 Stainless Steel Hardened & Tempered
12 Eyebolt Washer Carbon Steel Grade 1018
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Forged Steel, Normalized A015N Low Carbon
15 Seat Rings 410 Stainless Steel A276 Hard Faced
16 Wedge CA-15 Stainless Steel A217 Heat Treated
17 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/2 4 5-9/16 6-1/4 25/64 .855 .375 4-1/2 5.1
3/4 4 6 6-1/2 1/2 1.065 .500 4-3/4 9.3
1 4-1/2 6-5/16 8-1/2 3/4 1.330 .500 6-3/4 24.8
1-1/2 5-1/2 7-7/16 9-1/2 1-1/4 1.915 .500 14 70.9
MINIMUM QUANTITIES MAY BE REQUIRED
RP&C FORGED STEEL GATE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 12G
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
EFWB48D MALE SOCKET WELD X FEMALE NPT
EFWB49D MALE X FEMALE SOCKET WELD
• INTEGRALLY REINFORCED MALE END • SIZES 1/2” THRU 2” • FORGED STEEL • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – WELDED BONNET • WORKING PRESSURE (NON-SHOCK)
460 PSIG @ 900° F. Steam-Oil 715 PSIG @ 850° F. Steam-Oil 1975 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 410 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Flange Carbon Steel A108 Grade 1018
10 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
11 Eyebolt 410 Stainless Steel Hardened & Tempered
12 Eyebolt Washer Carbon Steel Grade 1018
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Forged Steel, Normalized A015N Low Carbon
15 Seat Rings 410 Stainless Steel A276 Hard Faced
16 Wedge CA-15 Stainless Steel A217 Heat Treated
17 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/2 4 7-5/8 6-1/4 25/64 .855 .375 5-1/2 5.1
3/4 4 8-11/16 6-1/2 1/2 1.065 .500 6-1/2 9.3
1 4-1/2 9-11/16 8-1/2 3/4 1.330 .500 10 24.8
1-1/2 5-1/2 10-3/8 9-1/2 1-1/4 1.915 .500 16 70.9
2 6-5/8 11-7/8 11-1/4 1-15/32 2.406 .625 24 91.6
MINIMUM QUANTITIES MAY BE REQUIRED
RP&C VALVES – CLASS 1500
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 4 V15
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
EFWB556E NPT ENDS EFWB557E SOCKET WELD ENDS
SIZES 1/2” THRU 2”
• FORGED STEEL GATE VALVE • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – BOLTED BONNET • WORKING PRESSURE (NON-SHOCK)
860 PSIG @ 900° F. Steam-Oil 1340 PSIG @ 850° F. Steam-Oil 3705 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
E TRIM (13 Cr/FHF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 410 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Plate Forged Carbon Steel A105
10 Gland Carbon Steel B484 Gr. 2, Cl. C, Type 1
11 Eyebolt 410 Stainless Steel Hardened & Tempered
12 Eyebolt Washer Stainless Steel 300 Series
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Forged Steel, Normalized A015N Low Carbon
15 Seat Rings 410 Stainless Steel A276 Hard Faced
16 Wedge Cobalt-Chromium Super Alloy CoCr-A
17 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/2 4-1/2 4 8-1/4 1/2 .855 .375 7-1/4 6.9
3/4 4-1/2 4 8-1/4 1/2 1.065 .500 8-1/4 12.7
1 5-1/2 5-1/2 9 3/4 1.330 .500 13-1/4 31.6
1-1/2 6-5/8 6-1/2 10-5/8 1-3/16 1.915 .500 24-3/4 71.1
2 8-1/4 7 12-1/4 1-15/32 2.406 .625 39-1/2 112.9
RP&C FORGED STEEL GATE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 3G
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
EFWB56D NPT ENDS SIZES ¼” THRU 2”
EFWB57D SOCKET WELD ENDS
• FORGED STEEL • ASTM A105N LOW CARBON (.25 MAX.), NORMALIZED • STANDARD PORT • OS&Y – WELDED BONNET • WORKING PRESSURE (NON-SHOCK)
460 PSIG @ 900° F. Steam-Oil 715 PSIG @ 850° F. Steam-Oil 1975 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 410 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Flange Carbon Steel A108 Grade 1018
10 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
11 Eyebolt 410 Stainless Steel Hardened & Tempered
12 Eyebolt Washer Carbon Steel Grade 1018
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Forged Steel, Normalized A015N Low Carbon
15 Seat Rings 410 Stainless Steel A276 Hard Faced
16 Wedge CA-15 Stainless Steel A217 Heat Treated
17 Body Forged Steel, Normalized A105N Low Carbon
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel
Dia. End To
End Center to Top(Open)
Port Socket Weld
Bore Socket Weld
Depth Approximate
Weight Typical Cv
Factors
1/4 4 3 6-1/4 9/32 .555 .375 4 2.3
3/8 4 3 6-1/4 25/64 .690 .375 4 5.7
1/2 4 3 6-1/4 25/64 .855 .375 4 5.1
3/4 4 3-1/2 6-1/2 1/2 1.065 .500 4-1/2 9.3
1 4-1/2 4-1/8 8-1/2 3/4 1.330 .500 6-1/2 24.8
1-1/4 5-1/2 4-3/4 9-1/2 1-3/16 1.675 .500 13 67.8
1-1/2 5-1/2 4-3/4 9-1/2 1-3/16 1.915 .500 13 70.9
2 6-5/8 5-1/4 11-1/4 1-15/32 2.406 .625 18 91.6
RP&C FORGED STEEL GATE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 5G
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
EC56D NPT ENDS SIZES ¼” THRU 2”
EC57D SOCKET WELD ENDS
• ASTM A182 Gr. F5 • WORKING PRESSURE (NON-SHOCK)
600 PSIG @ 1615° F. Steam-Oil 800 PSIG @ 1355° F. Steam-Oil 2000 PSIG @ -20° To 100° F.
EK56D NPT ENDS SIZES ¼” THRU 2”
EK57D SOCKET WELD ENDS
• ASTM A182 Gr. F22 Cl. 3 • WORKING PRESSURE (NON-SHOCK)
600 PSIG @ 1615° F. Steam-Oil 800 PSIG @ 1355° F. Steam-Oil 2000 PSIG @ -20° To 100° F. • STANDARD PORT • OS&Y – BOLTED BONNET • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 410 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Flange Carbon Steel A108 Grade 1018
10 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
11 Eyebolt 410 Stainless Steel Hardened & Tempered
12 Eyebolt Washer Carbon Steel Grade 1018
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Bolts Alloy Steel A193 Grade B16
15 Bonnet Chrome Moly A182 Grade F5/F22
16 * Gasket 316 SS/Grafoil® Spiral Wound
17 Seat Rings 410 Stainless Steel A276 Hard Faced
18 Wedge CA-15 Stainless Steel A217 Heat Treated
19 Body Chrome Moly A182 Grade F5/F22
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
1/4 4 3 6-1/4 9/32 .555 .375 4 2.3
3/8 4 3 6-1/4 25/64 .690 .375 4 5.7
1/2 4 3 6-1/4 25/64 .855 .375 4 5.1
3/4 4 3-1/2 6-1/2 1/2 1.065 .500 4-1/2 9.3
1 4-1/2 4-1/8 8-1/2 3/4 1.330 .500 6-1/2 24.8
1-1/4 5-1/2 4-3/4 9-1/2 1-3/16 1.675 .500 13 67.8
1-1/2 5-1/2 4-3/4 9-1/2 1-3/16 1.915 .500 13 70.9
2 6-5/8 5-1/4 11-1/4 1-15/32 2.406 .625 18 91.6
MINIMUM QUANTITIES MAY BE REQUIRED
RP&C FORGED STEEL GATE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 4G
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
ELF56D NPT ENDS SIZES ¼” THRU 2”
ELF57D SOCKET WELD ENDS
• FORGED STEEL • ASTM A350 Gr. LF2 • STANDARD PORT • OS&Y – BOLTED BONNET • WORKING PRESSURE (NON-SHOCK)
1100 PSIG @ 800° F. Steam-Oil 1975 PSIG @ -50° To 100° F.
800°F. IS MAX. OPERATING TEMP. FOR LF2 • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
D TRIM (13 Cr/HF) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 410 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Flange Carbon Steel A108 Grade 1018
10 Gland Carbon Steel B484 Gr. 1, Cl. C, Type 1
11 Eyebolt 410 Stainless Steel Hardened & Tempered
12 Eyebolt Washer Carbon Steel Grade 1018
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Bolts Alloy Steel A193 Grade B8M Cl.2
15 Bonnet Forged Steel A350 Gr. LF2
16 * Gasket 316 SS/Grafoil® Spiral Wound
17 Seat Rings 410 Stainless Steel A276 Hard Faced
18 Wedge CA-15 Stainless Steel A217 Heat Treated
19 Body Forged Steel A350 Gr. LF2
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel Dia.
End To End
Center to Top(Open)
Port Socket Weld Bore
Socket Weld Depth
Approximate Weight
Typical Cv Factors
¼ 4 3 6-1/4 9/32 .555 .375 4 2.3
3/8 4 3 6-1/4 25/64 .690 .375 4 5.7
1/2 4 3 6-1/4 25/64 .855 .375 4 5.1
3/4 4 3-1/2 6-1/2 1/2 1.065 .500 4-1/2 9.3
1 4-1/2 4-1/8 8-1/2 3/4 1.330 .500 6-1/2 24.8
1-1/4 5-1/2 4-3/4 9-1/2 1-3/16 1.675 .500 13 67.8
1-1/2 5-1/2 4-3/4 9-1/2 1-3/16 1.915 .500 13 70.9
2 6-5/8 5-1/4 11-1/4 1-15/32 2.406 .625 18 91.6
MINIMUM QUANTITIES MAY BE REQUIRED
RP&C FORGED STEEL GATE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 6G
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
ES56A NPT ENDS SIZES ¼” THRU 2”
ES57A SOCKET WELD ENDS
• STAINLESS STEEL • ASTM A182 Gr. F316/F316L • STANDARD PORT • OS&Y – BOLTED BONNET • WORKING PRESSURE (NON-SHOCK)
600 PSIG @ 1200° F. Steam-Oil 800 PSIG @ 1130° F. Steam-Oil 1920 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION A TRIM (316 SST) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 316 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Flange 316 Stainless Steel A240 Grade 1018
10 Gland 316 Stainless Steel B525 Gr. 2, Type 1
11 Eyebolt 316 Stainless Steel
12 Eyebolt Washer Carbon Steel Grade 1018
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Bolts Alloy Steel A193 Grade B8M Cl. 2
15 Bonnet Forged Stainless Steel A182 Gr. F316/F316L
16 * Gasket 316 SS/Grafoil® Spiral Wound
17 Seat Rings 316 Stainless Steel A276 Hard Faced
18 Wedge 316 Stainless Steel A351 Grade CF8M
19 Body Forged Stainless Steel A182 Gr. F316/F316L
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel
Dia. End To
End Center to Top(Open)
Port Socket Weld
Bore Socket Weld
Depth Approximate
Weight Typical Cv
Factors
1/4 4 3 6-1/4 9/32 .555 .375 4 2.3
3/8 4 3 6-1/4 25/64 .690 .375 4 5.7
1/2 4 3 6-1/4 25/64 .855 .375 4 5.1
3/4 4 3-1/2 6-1/2 1/2 1.065 .500 4-1/2 9.3
1 4-1/2 4-1/8 8-1/2 3/4 1.330 .500 6-1/2 24.8
1-1/4 5-1/2 4-3/4 9-1/2 1-3/16 1.675 .500 13 67.8
1-1/2 5-1/2 4-3/4 9-1/2 1-3/16 1.915 .500 13 70.9
2 6-5/8 5-1/4 11-1/4 1-15/32 2.406 .625 18 91.6
RP&C FORGED STEEL GATE VALVES
RP&C VALVE A Division of Conbraco Industries, Inc. RPBI9000-99 Page 7G
Hwy. 501 East Conway, SC 29526 843/347-4666 (PHONE) 843/347-1773 (FAX)
ESWB56A NPT ENDS SIZES ¼” THRU 2”
ESWB57A SOCKET WELD ENDS
• STAINLESS STEEL • ASTM A182 Gr. F316/F316L • STANDARD PORT • OS&Y – WELDED BONNET • WORKING PRESSURE (NON-SHOCK)
600 PSIG @ 1200° F. Steam-Oil 800 PSIG @ 1130° F. Steam-Oil 1920 PSIG @ -20° To 100° F. • CONFORM TO THE APPLICABLE PARTS OF THE
FOLLOWING SPECIFICATIONS: API
API 591 API 598 API 602 ASME/ANSI
B1.20.1 B16.11 B16.34 B31.1 B31.3 NOTE: Valve can be furnished to meet NACE SPEC. MR0175.
• MATERIALS OF CONSTRUCTION
A TRIM (316 SST) STANDARD (See Page 8 for optional trims)
No. Part Material ASTM Spec.
Remarks
1 Handwheel Malleable Iron A47 Gr. 32510
2 Handwheel Nut Steel A108
3 Internal Tooth Lockwasher
Steel
4 Nameplate Aluminum
5 Thrust Washer Stainless Steel Hardened
6 Operating Nut 416 Stainless Steel A582
7 Stem 316 Stainless Steel A276
8 Gland Nuts 303 Stainless Steel A194 Grade 8F
9 Gland Flange 316 Stainless Steel A240 Grade 1018
10 Gland 316 Stainless Steel B525 Gr. 2, Type 1
11 Eyebolt 316 Stainless Steel
12 Eyebolt Washer Carbon Steel Grade 1018
13a * Packing Graphite Grafoil® (241 or equal)
13b * Wiper Rings Braided Graphite 1630GF or equal
14 Bonnet Forged Stainless Steel A182 Gr. F316/F316L
15 Seat Rings 316 Stainless Steel A276 Hard Faced
16 Wedge 316 Stainless Steel A351 Grade CF8M
17 Body Forged Stainless Steel A182 Gr. F316/F316L
Operating Nut and Stem thread Lubricated * Recommended Spare Parts Note: Materials of construction may vary due to availability and Production
runs, however parts will still conform to the requirements of API 602.
DIMENSIONAL SPECIFICATIONS NOTE: Dimensions shown are subject to change. Contact factory for certified prints (exact dimensions) when required.
Size Handwheel
Dia. End To
End Center to Top(Open)
Port Socket Weld
Bore Socket Weld
Depth Approximate
Weight Typical Cv
Factors
1/4 4 3 6-1/4 9/32 .555 .375 4 2.3
3/8 4 3 6-1/4 25/64 .690 .375 4 5.7
1/2 4 3 6-1/4 25/64 .855 .375 4 5.1
3/4 4 3-1/2 6-1/2 1/2 1.065 .500 4-1/2 9.3
1 4-1/2 4-1/8 8-1/2 3/4 1.330 .500 6-1/2 24.8
1-1/4 5-1/2 4-3/4 9-1/2 1-3/16 1.675 .500 13 67.8
1-1/2 5-1/2 4-3/4 9-1/2 1-3/16 1.915 .500 13 70.9
2 6-5/8 5-1/4 11-1/4 1-15/32 2.406 .625 18 91.6