tc-1520c equipment case user's manual.pdf

7/29/2019 TC-1520C Equipment Case User's Manual.pdf

1/24

TC-1 5 2 0 C EQUIPM ENT CASE

USER'S MANUAL


2/24


3/24

Prepared by: Date: Document:Ascom Network Testing 26 August 2010 1424 - LZT 108 8932 Rev C

Ascom (2010)All rights reserved. TEMS is a trademark of Ascom. All other trademarks are the property of their respective holders.

TC-1520C Equipment Case

Users Manual


4/24


5/24

Ascom (2010) Document:1424 - LZT 108 8932 Rev C

Contents

1 Introduction ................................................................ 12 Overview of the TC-1520C ........................................ 12.1 Overview of Function ................................................................ 12.2 Devices Compatible with the TC-1520C ................................... 22.2.1 Phones ......................................................................................... 22.2.2 Scanners ...................................................................................... 22.2.3 Other Devices .............................................................................. 22.3 TC-1520C Compatibility with TEMS Investigation .................. 22.4 Using the TC-1520C with TEMS Investigation ......................... 23 Unpacking the TC-1520C System ............................. 33.1 TC-1520C System Contents ...................................................... 33.2 Charging the Internal Battery ................................................... 34 TC-1520C Component Details and

Functionality ............................................................... 44.1 Outer Connector Panel .............................................................. 44.1.1 Main Input Power Connector ....................................................... 44.1.2 Auxiliary Power Socket ................................................................ 54.1.3 RF Connector Ports ..................................................................... 54.1.4 LED Hole ..................................................................................... 54.2 Internal USB Hub ....................................................................... 54.3 Uninterrupted Power Supply (UPS) .......................................... 54.4 UPS Output Protection Fuse ..................................................... 64.5 Internal Device Power Panel (12 V DC) .................................... 64.6 Phone Power Panel.................................................................... 74.7 USB to RS-232 Port.................................................................... 74.8 Legacy 12 V DC Outputs ........................................................... 84.9 Power Distribution Board Fuse ................................................ 84.10 System Power Indicator ............................................................ 84.11 Power Connector Pin Assignments ......................................... 94.11.1 Main Input Power Receptacle ...................................................... 94.11.2 Internal Device Power (12 V DC) ................................................. 94.11.3 Phone Power Connectors ............................................................ 94.11.4 Legacy 12 V DC Power Connectors .......................................... 104.11.5 Cigarette Lighter Socket ............................................................ 104.12 Phone Cradle Mounting Patterns ........................................... 104.13 Internal Module Bolt Patterns ................................................. 104.14 Locking the TC-1520C Case.................................................... 11


6/24

Ascom (2010) Document:1424 - LZT 108 8932 Rev C

5 Vehicle Installation .................................................. 125.1 Seat Mounting Kit .................................................................... 125.1.1 Adaptation for Right-Hand Driven Vehicles ............................... 135.2 System Power Cable................................................................ 145.3 TC-1520C USB Interface .......................................................... 146 Shipping the TC-1520C System .............................. 157 TC-1520C Specifications ......................................... 158 Regulatory Qualifications ....................................... 16Appendix A. Current Draw Estimates for Internal

Devices ..................................................................... 17Appendix B. Procedure for Discharging the UPS

Battery ....................................................................... 17


7/24

Ascom (2010) Document:1424 - LZT 108 8932 Rev C 1(17)

1 IntroductionThis manual describes the contents, installation, and functionality of the

TC-1520C equipment case.Please note that instructions on how to install and operate scanners, audioquality modules, and phones are not found here. Such instructions areinstead found in the documentation accompanying these optional productkits, which are purchased separately.

2 Overview of the TC-1520C

2.1 Overview of Function

The TC-1520C equipment case makes drive testing with TEMSInvestigation practical. The case keeps external devices securely in place,while greatly simplifying the task of connecting them to the PC.

The TC-1520C accommodates up to four mobile phones as well as multiplecombinations of scanners and audio quality measurement (AQM) modules.

The TC-1520C is powered with 12 V DC from the vehicle cigarette lighteroutlet. The TC-1520C input power connector is internally bridged to oneauxiliary power cigarette lighter receptacle on the main panel (next to theXLR-type power inlet). This auxiliary power receptacle can be used withany device that accepts an automotive 12 V DC system.

Internally, the uninterrupted power supply unit (UPS) provides power to alldevices installed in the TC-1520C. The UPS has a built-in battery that canprovide temporary power to all devices when the main input power isremoved. However, this time is limited and is dependent on the number ofdevices connected to the TC-1520C case. The UPS does not providepower to the auxiliary power receptacle mentioned above.

The internal power distribution module provides five 3-pin connectors fordistributing power to the internal scanners and AQM devices, four 6-pinpower connections for providing power to the phone devices, and one USB-to-RS-232 interface.

A 7-port USB hub is used for connecting all internal and external devices to

the PC running TEMS Investigation. Devices requiring an RS-232 interfaceare connected to the USB hub through the USB-to-RS-232 converterintegrated into the power distribution board.

Note: No phone or scanner device accessories are delivered with theTC-1520C. All of these items must be purchased separately.


8/24


2.2 Devices Compatible with the TC-1520C

2.2.1 Phones

The TC-1520C is primarily intended to be used with phone modelssupported by TEMS Investigation 11.0 and later.

For information on what phones are supported by each release of TEMSInvestigation, please contact Ascom support:www.ascom.com/en/index/support/support-tems.htm

2.2.2 Scanners

SRU (Scanning Receiver Unit)

PCTel SeeGull LX single-band or dual-band WCDMA or GSM scanner PCTel SeeGull EX WCDMA/GSM scanner

PCTel SeeGull EX Mini WCDMA scanner

DRT 4301 scanner

2.2.3 Other Devices

TTU (Test Transceiver Unit)

TEMS audio quality measurement (AQM) module

2.3 TC-1520C Compatibility with TEMS Investigation

The TC-1520C case as such is compatible with all versions of TEMSInvestigation. On the other hand, each device installed in the case requiresthe TEMS Investigation version in which it was introduced, or a laterversion.

Again, for information on what devices are supported by each release ofTEMS Investigation, please contact Ascom support:www.ascom.com/en/index/support/support-tems.htm

2.4 Using the TC-1520C with TEMS Investigation

Drivers need to be installed on the PC for the USB-to-RS-232 serialconverter. These drivers are always delivered along with the TC-1520C,and they are also supplied with TEMS Investigation. Regarding driverinstallation, see the TEMS Investigation 11.0 Getting Started Manual,section 4.5.6.

The autodetect function in TEMS Investigation will detect the externaldevices regardless of when the equipment case is connected. It is howeverstill recommendable to connect the case to the PC before starting TEMSInvestigation.


9/24


3 Unpacking the TC-1520C SystemThe TC-1520C system has a specially designed shipping container. Do not

discard the shipping materials; these must be used when shipping the TC-1520C case in order to prevent damage due to shipping and handling.

3.1 TC-1520C System Contents

The TC-1520C system package should contain:

TC-1520C case

Accessory pouch

Car seat installation belts (five belts in total)

Replacement fuses

TC-1520C Users Manual (this document)

Cigarette lighter input power cable

Case combination lock

USB Type A to Type B cable for connecting the TC-1520C to a PC

3.2 Charging the Internal Battery

The TC-1520C case comes with an internal battery. This battery providestemporary power to the TC-1520C system when the main power is

interrupted. It is recommended that you allow time for this battery to charge,although this is not required for running the TC-1520C system.

To charge the internal battery, plug the main power cable into the TC-1520C and an external 12 V DC power source. Allow approximately twohours of charge time to fully charge the battery. Do not turn on the TC-1520C case during the initial charging, as this will increase the chargingtime. (The system battery will not be damaged if the case is turned onduring charging.)


10/24


4 TC-1520C Component Details andFunctionality

The following pages describe the functionality of every connector andcomponent within the TC-1520C case.

4.1 Outer Connector Panel

Outer connector panel

4.1.1 Main Input Power Connector

The input power rating is 12 V DC with a maximum current capacity of15 A. The system is protected by a 15 A fuse embedded inside thecigarette lighter cable plug, which is described in section 5.2. The TC-1520C case is not designed for 24 V DC systems.


11/24


4.1.2 Auxiliary Power Socket

This cigarette lighter socket can provide a maximum of 10 A at 12 V DC toany connected device. The outlet is not controlled by the internal UPS.

4.1.3 RF Connector Ports

There are ten SMA-type RF ports (ANT 1 through ANT 10) and twoSMB-type GPS ports (GPS 1, GPS 2). These ports are ground isolatedand can be connected to any internal device.

4.1.4 LED Hole

The hole marked LED is only used with the PCTel SeeGull LX scanner.

4.2 Internal USB Hub

The internal USB hub provides seven USB ports. The hub supportsUSB 1.1 and USB 2.0. Each port can provide 5 V DC at 0.5 A.

Front panel of internal USB hub

4.3 Uninterrupted Power Supply (UPS)

The UPS is used to turn on and off the installed TC-1520C componentsand to provide temporary power to the modules and phones if the mainpower is lost. Note that the UPS can power the TC-1520C system only for ashort period of time.

The UPS ON/OFF momentary rocker switch is located to the left of theUSB hub (see the drawing in section 4.4). It is recommended to turn off the

UPS when the case is not in use. Leaving the UPS powered on will drainthe internal battery.

On top of the power distribution module is a green LED. This LED will be litif the UPS is providing power.

The UPS will provide approximately 100 W/10 minutes of backup powerwhen the main power is lost. See Appendix A for device current drawestimates.

WARNING: The UPS contains a lithium-ion battery pack (rated 14.8 V,3800 mAh).


12/24


Do not store or operate the UPS in temperatures beyond thespecifications of the TC-1520C case (see chapter 7).

Do not ship the TC-1520C case with a charged battery. See Appendix Afor battery draining instructions.

If the battery fails to hold a charge, you need to return the TC-1520C forservice. Do not attempt to replace or remove the UPS battery.

4.4 UPS Output Protection Fuse

Beside the USB hub is a 7.5 A fuse. This fuse protects all internalcomponents.

Recommended replacement: ATO Blade Fuse 32 V DC 7.5 A, Littelfuse,025707.5PXPV

UPS on/off switch and system fuse

4.5 Internal Device Power Panel (12 V DC)

All internal devices are powered via the 12 V DC power panel. All fiveconnectors are provided power via the UPS. All optional scanners andaudio quality modules plug into this panel.


13/24


Internal device power panel

4.6 Phone Power Panel

Some phones require more charging power than the USB hub can provide.The 6-pin connectors marked MOBILE/EU will be used to provide thisextra power to the phones. These connectors in turn are powered via theUPS.

4.7 USB to RS-232 Port

The task of the USB-to-RS-232 serial converter is to convert data andtransfer it between the USB hub and a scanner or an external GPS deviceequipped with an RS-232 port.

In order for the PC to detect the COM port of the converter, some driverfiles (delivered with TEMS Investigation) must be installed on the PC. Seesection 2.4.

Once the serial converter is correctly installed, the PC operating system willdetect one additional COM port. The port will be assigned the nextavailable COM number; what number is used depends on what ports havealready been defined and so cannot be predicted. It is possible to inspectand to change the COM number using the Windows Device Manager.

The COM port will always be detected by the PC, whether or not anyequipment is connected to it. In other words, disconnecting the deviceconnected to the converter port does not affect port detection.


14/24


4.8 Legacy 12 V DC Outputs

These 2-pin connectors, marked 12 Vdc Out (1) and 12 Vdc Out (2), are

used to provide internal power connections for the PCTel SeeGull LXscanners.

4.9 Power Distribution Board Fuse

The 5 A fuse protects the phone power connectors and the 12 V DC Outconnectors only.

Replacement fuse: Mini-blade 32 V DC 5 A, Littelfuse, 0297005.WXNV

4.10 System Power Indicator

On top of the power distribution module is a green LED. This LED will be litwhenever the UPS is providing power to the system. If the LED does notlight up, troubleshoot as follows:

1. Push the UPS momentary on/off power switch.

2. Check the main 15 A input power cable fuse.

3. Check the 7.5 A system fuse.

4. Check the power distribution board 5 A fuse.

5. Push the UPS momentary on/off power switch again.

6. If the LED is still not lit, there is a fault in the system. Please contact

Technical Support and have the TC-1520C returned for repair.

Power distribution module


15/24


4.11 Power Connector Pin Assignments

4.11.1 Main Input Power Receptacle

1. Ground

2. +12 V DC at 15 A

3. No connection

4.11.2 Internal Device Power (12 V DC)

1. +12 V DC

2. No connection

3. Ground

4.11.3 Phone Power Connectors

1. +5 V DC

2. No connection

3. No connection

4. Ground

5. No connection

6. No connection


16/24


4.11.4 Legacy 12 V DC Power Connectors

1. +12 V DC

2. Ground

4.11.5 Cigarette Lighter Socket

Center +12 V DC at 10 A

Shell ground

4.12 Phone Cradle Mounting Patterns

This image shows the bolt patterns for mounting the phone cradles.

4.13 Internal Module Bolt Patterns

This image shows the bolt patterns for mounting the internal devicebrackets.


17/24


4.14 Locking the TC-1520C Case

A padlock (4-digit combination lock) is provided in the accessory kit forlocking the case.

WARNING: The TC-1520C is designed to have the lid open duringoperation. Closing the lid will trap the heat generated by the devices andmay cause devices to shut down or be damaged.


18/24


5 Vehicle Installation

5.1 Seat Mounting KitFor installation in a vehicle, please use the belts provided in the accessorykit. The belts will secure the TC-1520C to the seat and hold the lid open.Failure to use the belts could result in bodily injuries or damage to the TC-1520C in the event of a sudden stop.

The mounting kit consists of:

Two (2) short belts with buckle receptacle and clasp

Two (2) long belts with buckle tongue and clasp

One (1) lid retainer belt with clasps on each end

All belts must be used in order for the securing system to function properly.If any belts are missing, please contact customer support.

The recommended installation procedure is as follows:

1. One pair of belts (short + long) is used to strap the case to the seat oneach side. Perform steps 25 for each pair of belts.

2. Clasp the short belt with buckle receptacle to the front mounting hole ofthe case.

3. Clasp the long belt with buckle tongue to the rear mounting hole of thecase.

4. Pass the long belt between the seat and the back rest, then wrap thebelt around the seat from back to front.

5. Plug the buckle together and pull the belt tail firmly until the case sinksinto the seat and does not move. You may need to apply pressure tothe top of the closed case to assist in this tightening.

6. Next, open the lid and clasp the lid retainer belt to one of the lidslocking holes.

7. Wrap the belt around the back rest and clasp the other end to the otherlocking hole in the lid.

8. Pull the belt tail firmly until the lid sinks into the back rest.9. If the case has free movement, continue to tighten the belts until no

free movement exists.


19/24


TC-1520C case strapped to vehicle seat

Long belt inserted between seat and back rest

5.1.1 Adaptation for Right-Hand Driven Vehicles

The mounting of the interior of the TC-1520C is adapted for left-hand drivenvehicles. It is easy to adapt the case to right-hand driven vehicles:

1. Remove the four screws located on the bottom of the case. This willrelease the internal chassis.

2. Rotate the internal chassis 180 degrees and replace it back into thecase.

3. Align the four holes between the outer case and internal chassis andreinstall the four screws.


20/24


Detaching the internal chassis of the TC-1520C

5.2 System Power Cable

The power cable provided is specifically designed to handle the 15 Acurrent required to operate the TC-1520C system. Only the supplied powercable should be used with the TC-1520C.

The cigarette lighter plug can be plugged into any automotive cigarettelighter receptacle with a minimum of 15 A capacity.

The 3-pin right angle XLR connector plugs into the power receptacle on theconnector panel.

TC-1520C power cable

The cigarette lighter plug has an integrated LED indicator. If this LED is notlit, the fuse may be blown.

Recommended fuse: Fast-acting 3AG cartridge fuse, 32 V DC 15 A,Littelfuse, 0312015.HXP.

5.3 TC-1520C USB Interface

Connect to the TC-1520C hub using the USB cable provided. Plug theType B connector into the hub and the Type A connector into your PC.


21/24


6 Shipping the TC-1520C SystemThe internal components of the TC-1520C cannot withstand the shock and

vibration forces that typically arise during commercial shipping. Thereforethe TC-1520C may be commercially shipped only in its original shippingcontainer.

Preparations for shipping:

1. Drain the UPS battery as described in Appendix B.

2. Pack the TC-1520C in its original shipping materials.

3. Do not pack any loose components inside the TC-1520C. This includesthe phones, power cable, and accessory pouch. Pack these itemsseparately in the shipping container. All fixed modules such asreceivers and AQM modules may remain installed inside the TC-1520C

case.Failure to follow these instructions may damage the internal components ofthe TC-1520C case during shipment.

7 TC-1520C Specifications Operating temperature: 0C ... 40C

Storage temperature: 20C ... 50C

Weight or case with no scanners or AQM modules installed: 4.2 kg

(9.3 lbs) Input voltage: 9 ... 18 V DC (12 V DC nominal 15 A)

Auxiliary power receptacle: 12 V DC nominal 10 A

UPS controlled internal power: 12 V DC at 7.5 A

Internal USB hub: 7 ports supporting USB 1.1 or 2.0, 5 V DC at 0.5 Aper port.

Up to 4 phone cradles supported

Up to 5 internal scanners or audio quality modules supported

Case dimensions: See the drawing below.


22/24


Physical dimensions of TC-1520C (all measurements in mm)

8 Regulatory Qualifications

RoHS compliant


23/24


Appendix A. Current Draw Estimates forInternal DevicesThe UPS can provide a maximum of 7.5 A of current. 2.0 A is reserved forthe USB hub and any attached devices that require USB power. Thisleaves 5.5 A available for optional internal devices. The table below lists thecurrent draw of each type of internal device; from this data you canestimate the total required amperage by adding up the current draws of alldevices you plan to install.

Supported Devices Approximate Current Draw at 12 V

PCTel SeeGull LX scanner Max. 2.5 A

PCTel SeeGull EX scanner Max. 1.5 A

PCTel SeeGull EX Mini scanner Max. 1.0 A

DRT 4301 scanner Max. 1.4 A

SRU Max. 0.7 A

TEMS AQM module Max. 0.5 A

Example: If you install two PCTel SeeGull EX scanners they will draw atotal of 1.5 + 1.5 = 3 A, and you then have 2.5 A left for installing furtherdevices.

Appendix B. Procedure for Dischargingthe UPS Battery1. Do notconnect the TC-1520C power cable.

2. Power on the TC-1520C. The UPS unit will consume power over time.When the battery is completely drained, the green LED on top of thepower distribution module will go out. It will take approximately14 hours for a fully charged battery to drain.

To speed up the process, leave all internal devices connected. The externalauxiliary cigarette lighter plug will not affect the battery discharge time.


24/24

www.ascom.com/tems

0Ascom201

0.Allrightsreserved.TEMSisatrademarkofAscom.A

llothertrademarksarethepropertyoftheirrespective

holders.

AScoM NETwork TESTiNg lEAdS ThE world iN providiNg bEST-iN-

clASS SoluTioNS To MEASurE, ANAlyzE, ANd opTiMizE MobilE

NETworkS.

The TEMS Portfolio offers a complete set of trusted solutions for drive

testing, benchmarking, monitoring, and analyzing network performance.

These state-of-the-art offerings facilitate the deployment, optimiza-

tion, and maintenance of mobile networks.

We are the industry leader, and our products are supplied to the

worlds top mobile operators, equipment vendors, and professional service

providers.

Ascom Network Testing Inc.

1943 Isaac Newton Square

Reston, Virginia 20190 | USA

www.ascom.com/tems

Ascom reserves the right to change specications without notice. Ascom acknowledges all registered trademarks appearing herein.
http://www.ascom.com/temshttp://www.ascom.com/tems

tc-1520c equipment case user's manual.pdf

Documents