ΔT Features:

5 Channel

Over 2000 measurements per channel

0 – 380°C at ±0,5°C

Easy & Simple to use

Adaptable software

Economic

ΔTDelta T - Wizard Thermal Profi ling - comprises a 5 channel temperature logger and user friendly software providing the simplest and most basic data to the most comprehensive SPC demands as the user desires.

ΔTWIZARD THERMAL

PROFILING

ΔT Features:

5 Channel

Over 2000 measurements per channel

0 – 380°C at ±0,5°C

Easy & Simple to use

Adaptable software

Economic

ΔT Delta T - Wizard Thermal Profiling - comprises a 5 channel temperature logger and user friendly software providing the simplest and most basic data to the most comprehensive SPC demands as the user desires.

ΔT Wizard Thermal Profiling• CAPABLE–ΔT can record over 10,000 measurements. Up to 2048 measurements per channel from 5 channels, using type K thermocouples.

• SIMPLE–Connectthethermocouples,switchon the instrument, put into its heat shield and it’s ready to use. Once through the soldering system, connectviatheUSBcablesuppliedtoaPCand downloadthedata.Itautomaticallystoresthelast data set in case you forget.

• ADAPTABLE–Youdecidehowmuchinformation and data you require and create your own template.Youcaneveninsertyourowncompany icon.

• FLEXIBLE–TheΔT software permits the user to import pictures, have independent labelling, apply upper & lower set points and employ result overlays.

• ACCURATE–Temperaturesfrom0–380°C at ± 0,5°C and a resolution of 0,1°C

• ECONOMIC–ΔT delivers value for money and less than you might think – ask us for a quote.

Gen3 Systems – for over 40 years, recognised leaders in dealing with the challenges for high reliability electronic circuitry. Your partner in Capital Equipment who understands electronics manufacturing…

…because we do that too!

Helping you Reduce Waste – Improve your Product Reliability – Increase your Profi t – are the key elements in all of the products and services we provide.

Achieving high reliability is an increasingly critical issue in today’s products, now that very low defect levels in manufacture are obtainable. In order to keep up with the rapid developments of the global market, we off er a range of suitable measurement methods and techniques that further refi ne the assembly processes that help you, our customer, to remain competitive.

We have specialist experience and expertise in:

• Board and component preparation

• Component refi nishing

• Soldering science and techniques

• Process control and Inspection

• Cleaning and Conformal coating

• Circuit reliability prediction

• Test Services

• Rework

• Micro-Electronics Assembly

Gen3 Systems – for over 40 years, recognised leaders in dealing with the challenges for high reliability electronic circuitry. Your partner in Capital Equipment who understands electronics manufacturing…

…because we do that too!

Helping you Reduce Waste – Improve your Product Reliability – Increase your Profi t – are the key elements in all of the products and services we provide.

Achieving high reliability is an increasingly critical issue in today’s products, now that very low defect levels in manufacture are obtainable. In order to keep up with the rapid developments of the global market, we off er a range of suitable measurement methods and techniques that further refi ne the assembly processes that help you, our customer, to remain competitive.

We have specialist experience and expertise in:

• Board and component preparation

• Component refi nishing

• Soldering science and techniques

• Process control and Inspection

• Cleaning and Conformal coating

• Circuit reliability prediction

• Test Services

• Rework

• Micro-Electronics Assembly

ΔT Software

The ΔT software is the most economic solution on the market. Created to provide all the essential information with the most user-friendly software for truly outstanding Cost - Performance with minimal operator training.

However it is also versatile: • Import pictures showing the theormocouple attachments • Independent labelling • Upper & lower process limit set points can be defi ned • Input the oven zone number and length • Label the soldering system.

All this information can be stored and then compared including an overlay function to make fast & easy comparison of individual data sets. These data sets can even be imported into your own personalised templates using your own pre-defi ned process conditions.

When a print-out is required you can decide how much information you want to include!

5ChannelTemperatureLogger

ΔT - Wizard Thermal Profi ling - comprises a 5 channel temperature logger and user friendly software providing the simplest and most basic data to the most comprehensive SPC demands as the user desires.

Understanding the thermal excursions on your electronic circuit assembly are critical to reducing solder defects thereby cutting down on production waste and greatly improving end-product reliability.

Since the advent of lead-free alloys with their normally far higher melting points, ensuring that a small component doesn’t fry and that a big component reaches soldering temperature is critical. Connecting a thermo-couple to 5 diff erent locations on an assembly, as it moves through the soldering process, will give the process engineer the data required to maintain what is often a very narrow process window.

The ΔT is able to withstand solder process temperatures >400°C. The special housing or thermal shield, even permits safe use in vapour-phase soldering systems.

Many thermal profi ling systems have a fi xed sampling rate that does not pick up the wide temperature excursions experienced in wave soldering. ΔT however, incorporates dynamic sampling that ensures accurate temperature logging by varying the sampling rate.

ΔT is simple and easy to use. Connect the thermocouples, switch on the instrument and place the ΔT into its special housing. It is now ready to use.

Once the measurement is complete, simply connect ΔT to its USB cable interface and connect to the PC. If you forget to download the data before switching the system off , don’t worry, the last test run is automatically stored in the ΔT memory. Having collected this valuable data, the process engineer then wants the simplest means by which to display the results, but also to have fl exibility in the software to include relevent information to the Statistical Process Control in use. There is an ever growing amount of important and relevant information required but this normally results in having a very high capital cost to acquire such sophistication, not any more!

ΔT Features• Measurement: 5 Channels for NiCr-Ni thermo couples (Type K)• Connection to PC: USB-Port 1.1 or higher• Operation: On/Off Switch • Power supply: 9V Battery• Temperature measurement range: 0-380°C• Max. storing rate: from 10Hz , dynamically• Resolution: 0,1°C• Accuracy: +/- 0,5°C• Maximum storage capacity: 2048 measurements for each channel with dynamical storage management for continuous measurement• Operation display: multi-colour LED displays low voltage warning and general status of equipment• Dimensions Profi ler(WxHxL): 95x21x125mm• Dimensions Thermal Box: 152x24x207mm• Customer logo id

ΔT Software:

• PC requirements: Windows® based computer

www.gen3systems.com

Gen3 Systems Limited

B2, Armstrong Mall, Southwood Business Park, Farnborough, Hampshire, GU14 0NR. UKTelephone: +44 (0)12 5252 1500 • Fax: +44 (0)12 5252 1112 • Email: sales@gen3systems.com

A BRITISHMANUFACTURER

Distributor: