2805 Mercer-Butler Pike Grove City, Pennsylvania 16127 Phone: 800-552-3127 Fax: 888-552-3127

Identification and Safety Products

Technical Data Sheet

System Wrap Around Pipe Markers RED Wrap Around Mechanical Pipe Markers Conform to ANSI A13.1-1981 Scheme for the identification of Piping Systems. Apply in seconds. Just uncoil and snap around pipe. No pipe preparation needed for banding or taping. Directional flow arrows included. 360º visibility (visible from every angle). Product Description: RED System #1 Pipemarkers (sizes A-E) are thermoformed, coiled, vinyl printed sheet. RED System #1 (sizes F-H) are flat vinyl printed sheets which attach to pipe using nylon ties. Use: For marking all varieties of pipe, especially unclean surfaces. Physical Properties: Width: Size A&B 8” LONG Size C,D,E,F 12” LONG Size G 24” LONG Size H 32” LONG Thickness: Size A&B .015 THICK Size C,D,E .025 THICK Size F,G,H .015 THICK Gloss: 135 Units (20ºF Test) Chemical Resistance: Excellent resistance to most petroleum and low apliphatic alcohols. Water Resistance: Excellent Service Temperature: Without adhesive strip– 20ºF to 120ºF ALL SIZES With use of adhesive strip– 20ºF to 150ºF System #1 is not recommended for use in environments or on pipes constantly above 150ºF. Expected Exterior Life: Five years, Mid continental United States. Storage Stability: Indefinite shelf life at conditions of 70ºF (20ºC) and 60% RH. Compliance: Meets or exceeds ANSI A13.1 guidelines for length, color and letter height.

JOB:__________________________________________________CONTRACTOR:______________________________________

Standard Colors: White, Yellow, Green, Blue, Red, Orange and Black.