7/28/2019 Syringe Gives Boost to Contrast Media Injection.pdf

1/1

Syringe Gives Boost to Contrast Media Injection

Search... GO

(#) (#) (#) (#) (#)

Designed for contrast

media injections, the

PowrSyringe is

capable of an injection

that is between 20 and

100% faster than a

standard control

syringe.

0 (#)

Author: Shana Leonard

Tweaking a suppliers valve resulted in enhanced comfort for prosthetics patients

Originally Published MPMN (/mpmn/index.html) May 2008

ENGINEERING EXCELLENCE

Syringe Gives Boost to Contrast Media Injection

Shana Leonard (mailto:Shana.Leonard@cancom.com)

Nothing beats the need for speed when it comes to contrast media injections. Fast contrast media

injections can improve image qualitythus reducing the possibility of misdiagnosisand can enhance

the safety of both the patient and the physician.

The PowrSyringe, manufactured by Pinyons Medical Technology Inc. (Park City, UT;

www.pinyonsmedical.com (http://www.pinyonsmedical.com) ), is capable of injections that a re between 20

and 100% faster than a standard control syringe, according to Shawn Fojtik, company president and

CEO. Faster angiographic injections can reduce the amount o f contrast media used, and, in turn,

promote increased patient safety.

If [the syringe] injects too slowly, a doctor tends to give more contrast to compensate or to give a

second injection, Fojtik explains. It becomes a very important patient safety benefit because

approximately 1015% of all patients who have a coronary angiogram are susceptible to renal failure

due to too much contrast media. Studies suggest that reducing the volume of contrast agents

required for injection by 1020% could significantly decrease the risk of contrast-induced nephropathy;

that condition can prolong hospital stays and even lead to death.

Faster injection speeds could also benefit physicians in the long term. Recent in vivo testing supports

that the faster injection speed achieved by the PowrSyringe could ultimately save an interventional

cardiologist an estimated hour and a half each year of direct exposure to cine x-ray radiation, according to Fojtik.

But in order to live up to the possibilities it presented for the marketplace, the PowrSyringe first demanded a design that

facilitated the quick administration of contrast media, while simultaneously emphasizing safety and ergonomics. Pinyons

enlisted the help of Integrated BioSciences Inc. (IBS; Lewisberry, PA; www.ibiosci.com (http://www.ibiosci.com) ) and The Tech

Group, a West Pharmaceutical Services Co. (Montgomery, PA; www.westpharma.com (http://www.westpharma.com) ) to

incorporate all of these elements into a manufacturable design.

Stemming from its close work with B. Braun Medical, IBS had extensive experience with syringe and disposable applications,

primarily for their assembly and packaging. The Tech Group contributed solid-model 3-D CAD product engineering to the

project, in addition to producing rapid prototype units manufactured using a combination of SLA, machined-plastic, metal-

forming, and compression-molding techniques, according to Ron Bell, who served as the firm's project manager for the

PowrSyringe. [Both companies] contributions were huge in helping to realize the basic complicity, safety, and usability of the

product, Fojtik notes.

Although it reentered the project for the assembly stage, IBS originally coordinated with The Tech Group to bring the

PowrSyringe through the initial concept and development phase. The industrial design of the product had been fairly well

developed without consideration for the mechanical and manufacturability needs, explains Bell. Significant iterative

compromise efforts were required to arrive at the finished design that was aesthetically, ergonomically, functionally, andmechanically acceptable, yet still suitable for cost-efficient, large-volume automated commercial manufacturing.

Pinyons approached Globe Medical Tech Inc. (Houston; www.globemedtech.com (http://www.globemedtech.com) ), a contract

manufacturer specializing in disposables, to provide molding services in addition to product and manufacturing validations.

Globe was able to simultaneously mold several product sizes quickly and economically in order to get the product ready for

initial user feedback. In addition, Globe helped to identify a low-cost and effective material, along with other molding

enhancements, for the syringe handle that could withstand the high pressure and force necessary to achieve the fast injection

rates that distinguish the product from its competitors.

Copyright 2008 Medical Product Manufacturing News

Page 1 of 1Syringe Gives Boost to Contrast Media Injection | Qmed

10/21/2011http://www.qmed.com/mpmn/article/syringe-gives-boost-contrast-media-injection