supratec mbr-600
DESCRIPTION
-TRANSCRIPT
-
Flat Sheet Membrane MBR Module 600 m Membrane Surface
SupratecMembrane Bio-Reactor
MBR-600
Filtration System GmbH & Co. KG
-
SUPRATEC Membrane Bio-Reactor (MBR) moduleSupratec Filtration System
Supratec Filtration System GmbH & Co., KG, located in Simmern/Hunsrueck Germany, is a membrane division of Supratec Group who has more than 40 years experience for waste water field, specially famous for the best fine bubble aeration system all over the world. The MBR module is providing municipalities and industries around the world with economical, comprehensive wastewater solutions.
New flat sheet membrane
Comparing with hollow fiber membrane and conventional flat sheet membrane, it is well-known that the hollow fiber membrane has high footprint density but is easily choked by sludge inside of bundles, while conventional flat sheet membrane is better to avoid choked but not able to back flush as well as low footprint density. Now Supratec new flat sheet membrane system has a very high footprint density with back flush function as your wish.
MBR System
With the advantage of simple process, better quality of outlet, easy to operate and manage, small floor area, Membrane Bio-Reactor (MBR) is recognized the Hi-Tech in the wastewater treatment currently. At present the technology has been widely used in wastewater treatment and recycling in Germany, America, Japan, Etc.
Advantage & Feature
New designed MBR module Flat sheet membrane with
permeate back flush Minimum chemical cleaning
requirement Highest footprint density as hollow
fiber module One of the biggest module
membrane surface High flux for the whole life Innovative double module layers
possible High stiff spacer to avoid
dimension changing Easy to operate with fully
automatic controller
Supratec Filtration System GmbH & Co. KG
www.supratec-filtration.de
-
SUPRATEC Membrane Bio-Reactor (MBR) moduleSpecification & Parameter
Membrane Material PES or PVDF
Operation Pressure 20 350 mbar
Pore size 0.03 micrometer Dry weight 590 kg
Supporter PET or PP Non-woven Air demand 60-120 m/h
Spacer High Stiff PET Textile Cleaning period 1 or 2 times/year
Dimension 2500*2300*700 (H*W*D) mm Water depth2.8 6 meters(double installation posible)
Membrane surface 600 m
2 Aeration type High efficiency plate diffuser MF650
Backflush Yes Max. Temperature 40
Flux rate 10 -- 32 l/m.h(MBR application) pH range 2 - 11
Supratec Filtration System GmbH & Co. KG
www.supratec-filtration.de
Municipal Wastewater
Industrial Wastewater
Water Reuse
Drinking Water Treatment
Grey Water Treatment
Applications
Status: May 2015
-
SUPRATECvon-Drais-Strae 2c D-55469 Simmern/HunsrckFon: + 49 (0 67 61) 96488252Fax: + 49 (0 67 61) 96488259
e-mail: [email protected]
F i l t r a t i on Sys temGmbH & Co . KG
Innovations by Supratec
Innovative TLL (Three-Layer-Lamination) technology
Highest efficieny OXYFLEX MF 650 fine bubble plate diffuser
Talent desgination of Weight-floating balance to avoid structuredeformation
Innovative double piles supporter textile spacer
No elongation problem during long-term operation due to specialtreatment of spacer