supplement catalogue 2015 - gregg distributors · pdf filesupplement catalogue miller

20152015

GREGG DISTRIBUTORS LTD.GREGG DISTRIBUTORS LTD.

32 NORTH STABILicers™ — Traction Gear ............................................SP04-76ACCUFORM SIGNS® Safety Tags ...........................................................SP04-77BAFFIN Colorado Boot .............................................................................SP04-79C.H. HANSON Marking Stamps ...............................................................SP04-64CHROME TAPE MEASURE .....................................................................SP04-64DANGEROUS GOODS Placards .............................................................SP04-77EATON AEROQUIP High Pressure Hose .................................................SP04-79ERGODYNE® Squids™ Hard Hat Lanyard ..............................................SP04-77FASTER® Flat Face Couplings .................................................................SP04-79GANDER BRAND TIG (Tungsten Inert Gas) Gloves ...............................SP04-76GPI® Accessories ...................................................................SP04-71 to SP04-72GPI® DEF Pumps & Meter ........................................................................SP04-69GPI® Fuel Transfer Pumps ....................................................SP04-66 to SP04-67GPI® Hand Pumps .................................................................SP04-69 to SP04-70GPI® Meters ...........................................................................SP04-70 to SP04-71GPI® Speciality Pumps .............................................................................SP04-68HOBART® Aluminium Electrodes...........................................SP04-61 to SP04-62HOBART® Low Alloy Electrodes ...............................................................SP04-60HOBART® Mild Steel Electrodes ...........................................SP04-58 to SP04-60HOBART® Mild Steel Solid Wires .............................................................SP04-61HOBART® Tubular Wires .......................................................SP04-62 to SP04-63JAVELIN INDUSTRIAL Fab Tools ............................................................SP04-65KIMBERLY-CLARK Paper/Wiping Products .............................................SP04-76KUNY’S Tool Pouches, Holders, & Carriers .............................................SP04-65KRYLON Paint Products ..........................................................................SP04-76MECHANIX WEAR® Professional Gloves ................................................SP04-76MILLER® Accessories ............................................SP04-26, SP04-50 to SP04-54

In this issue:

NEW PRODUCT 4SUPPLEMENT CATALOGUE

MILLER® Drive Rolls, Tongs, & Tips .........................................................SP04-55MILLER® Engine-Driven Welders ..........................................SP04-21 to SP04-24MILLER® Fume Extraction ........................................................................SP04-38MILLER® Gas Equipment ......................................................SP04-27 to SP04-37MILLER® GTAW/TIG Welders................................................SP04-15 to SP04-19MILLER® MIG Spool Guns ....................................................SP04-48 to SP04-49MILLER® MIG Welding Guns .................................................SP04-45 to SP04-47MILLER® MIG/GMAW Welders ..............................................SP04-02 to SP04-06MILLER® Multiprocess Welders .............................................SP04-06 to SP04-07MILLER® Plasma Cutter Welders .............................................................SP04-25MILLER® SMAW/Stick Welders .............................................SP04-13 to SP04-14MILLER® SuitCase® Wire Feeders ...........................................................SP04-10MILLER® Weldcraft™ TIG Torches ...........................................................SP04-20MILLER® Weldcraft™ Tungsten ...............................................................SP04-19MILLER® Welding Electrical Accessories ..............................SP04-56 to SP04-57MILLER® Welding Protection .................................................SP04-39 to SP04-43MILLER® Wire Feeders ......................................................... SP04-11 to SP04-12MILLER® Workstations .............................................................................SP04-44MILLER® XMT® Multiprocess Welders ...................................SP04-08 to SP04-09MILTON Inflator Gauges ...........................................................................SP04-65PRONGHORN Booster Cables ................................................................SP04-78PRONGHORN Booster Cable Clamps .....................................................SP04-78PRONGHORN Quick Connectors .........................................SP04-78 to SP04-79RIDGID® Red Wet/Dry Vacuum Cleaners ..............................SP04-73 to SP04-75 TAPE Industrial Tape ................................................................................SP04-65TARGET TECH Incandescent Beacons ...................................................SP04-77

SP04-2 GREGG DISTRIBUTORS LTD.

MILLER®

Welder Features

MIG/GMAW Welders

MLR/2777/2784

Millermatic® 141 & 190•Auto-Set™ automatically provides the right settings to weld mild steel while infinite voltage control allows the flexibility to manually set your own parameters: Set the wire diameter (.024 or .030” diameter solid steel wire), a blue light shows Auto-Set is activated; Dial in the thickness of what you’re welding; Start welding with the exact parameters you need! •Angled cast-aluminum drive system with calibrated tension knob creates consistent feeding and easy setup with included 10 ft. (3 m) MIG gun or optional 15 ft. (4.6 m) MIG gun •Quick Select™ drive roll makes setup quicker by offering three grooves — two for different size solid wire and a third for flux-cored wire •Auto Spool Gun Detect™ automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch •Smooth-Start™ provides a smooth, spatter-free start. It’s the best-starting machine in the small MIG machine category. •Thermal overload protection shuts down unit and activates the over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when unit cools •Uses 4” or 8” (102 or 203 mm) spoolsMillermatic 190 Model Additional Features: •Miller inverter technology combines best-in-class arc characteristics with the portability of a 35-pound machine. The arc is extremely forgiving to variations in arc length and travel speeds. •Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machineProcesses:•MIG (GMAW) • Flux-Cored (FCAW)Comes Complete with: 10-ft. (3 m) M-100 MIG gun and cable assembly (#248282), 10-ft. (3 m) work cable with clamp, 6.5-ft. (2 m) power cord with plug, Quick Select™ drive roll for .024” (0.6 mm) or .030/.035” (0.8/0.9 mm) solid wire, and .030/.035” (0.8/0.9 mm) flux-cored wire, Flow gauge regulator and gas hose for argon or AR/CO2 mix, two .030" contact tips, Hobart® spool of .030” solid wire, hook-and-loop cord wraps, and material thickness gauge (#229895)Part No. 907612, Millermatic 141.Part No. 951601, Millermatic 141 with running gear/cylinder rack.Part No. 907613, Millermatic 190.Part No. 951602, Millermatic 190 with running gear/cylinder rack.Part No. 300371, Spoolmate™ 100.Part No. 301239, Running Gear/Cylinder Rack.Part No. 301262, Protective Cover.Part No. 220179, .023/.024 (0.6 mm) to .035 (0.9 mm) V-groove Drive Roll.Part No. 261157, .023/.024 (0.6 mm) to .035 (0.9 mm) V-groove and .030 (0.8 mm) to .035 (0.9 mm) V-knurl Drive Roll.

Model No. Input Power

Amperage Range Rated Output Wire Feed Speed Machine Only

DimensionsMachine Only

Net WeightWire Type and Diameter Capacity

120 V 240 V KVA KWAmps Input at Rated Output, 60 Hz

Millermatic 141 120 V 30–140 90 A at 18.5 VDC, 20 — 3.0 2.45 15– 360 IPM Solid Steel .023 –.030” (0.6 – 0.8 mm) 51 lb. (23.1 kg) 20% duty cycle (0.4 – 9.1 m/min.) Stainless .023 –.030” (0.6 – 0.8 mm) Flux-Cored .030 –.035” (0.8 –0.9 mm)Millermatic 190 240 V 30–190 140 A at 21 VDC, — 21 5.0 3.8 60– 600 IPM Solid Steel .023 –.035” (0.6 – 0.9 mm) 35 lb. (15.9 kg) 40% duty cycle (1.5 – 15.2 m/min.) Stainless .023 –.035” (0.6 – 0.9 mm) Flux-Cored .030 –.035” (0.8 –0.9 mm)

12.5”H x 11.25”W x 20.5”D

(318 mm x 286 mm x 521 mm)

Mild Steel Welding CapabilityModel 141: Min - 24 ga. (0.8 mm) Max - 3/16” (4.8 mm)Model 190: Min - 24 ga. (0.8 mm) Max - 5/16” (7.9 mm)

Aluminum Welding CapabilityModel 141: Min - 18 ga. (1.2 mm) Max - 14 ga. (1.9 mm)Model 190: Min - 18 ga. (1.2 mm) Max - 1/4” (6.4 mm)

Light industrial products are suitable for the home hobbyist or occasional user. They are designed to be easy to operate, are affordably priced and typically have a 20% duty cycle and rated output of 230 amps or lower.

Industrial products are suitable for applications that do not require high-volume production. They typically have a40 to 60% duty cycle and/or rated output of 300 amps or lower. Industrial products are an appropriate choice for professional welders.

Heavy industrial products are suited to high-volume production and/or welding of thicker materials. They typically have a duty cycle of 60 to 100% and a rated output of at least 300 amps. Heavy industrial products are designed with the arc characteristics and product features professional welders demand for code-quality work.

Output Power

Symbol Meanings

Power Icons

Auto-Set™

Unit requires single-phase input power

Unit supplies alternat-ing current and direct current weld output

Unit requires three-phase input power

Unit supplies constant-current weld output

Unit supplies alternat-ing current weld output

Unit supplies constant-voltage weld output

Unit supplies direct current weld output

Unit supplies constant-current and constant-voltage weld output

Improves productivity and maneuverability by eliminating cord tangles. Reduces clean up time and work area cord clutter. Improves safety by eliminating control cord and reducing potential trip hazard. Improves reliability by eliminating control cord failure.

The Auto-Line circuit boosts primary power to a higher, constant voltage. Even if incoming voltage varies widely, the circuit ensures a rock-steady welding or cutting arc.

ArcReach provides remote control at the wire feeder without needing a control cable.

Insight welding information management solutions help your operation be more competitive and profitable by delivering accurate, decision-ready information about your welding processes.

SP04-3www.greggdistributors.ca

MILLER®

MIG/GMAW WeldersMLR/2777/2784

Millermatic® 212 Auto-Set™•Auto-Set makes setup quick and easy. On the Millermatic 212, it works with .030 and .035”. wire •Infinite voltage control - When used in manual mode provides broader operating range with finer control than a tap machine. •Gun-On-Demand.™ Simply pull the trigger for either gun and you’re ready to weld. No wasted time installing modules and using gas valve kits. •Heavy-duty aluminum, two-drive-roll system •Fan-On-Demand™ cooling system only operates when needed reducing power consumption and keeping internal components cleaner •Aluminum MIG welding with optional Spoolmate™ 200 spool gun. Wire feed speed control on the gun saves time by reducing trips back to the machine. Also compatible with industrial Spoolmatic® spool guns.Processes:• MIG (GMAW) • Flux-Cored (FCAW)Comes Complete with: 15 ft. (4.5 m), 250-amp M-25 gun, 10 ft. (3 m) work cable with clamp, 7 ft. (2.1 m) power cord and plug, Flow gauge regulator and gas hose for argon or AR/CO2 mix, Factory-installed lowered running gear/cylinder rack, .030/.035” reversible dual-groove drive rolls, and extra contact tips and material thickness gauge Part No. 907405, Millermatic 212.Part No. 951177, Millermatic 212 with Spoolmate 200, regulator, gas hose, and dual cylinder rack.Part No. 300497, Spoolmate™ 200.Part No. 300337, Dual EZ-Change™ Low Cylinder Rack.Part No. 300335, Elevated Gun and Cable Rack.Part No. 195142, Protective Cover.Part No. 300517, Full KVA Adapter Cord.

Millermatic® 252•Infinite voltage control with self-calibrating digital meters that permit presetting of voltage and wire feed speed. Ensures precise parameters and ac-curacy. •Auto-Gun Detect™ automatically adjusts voltage, wire speed and timers for faster switching between MIG, push-pull and spool guns. Integrated digital timers come complete with presettable preflow/postflow, burnback, spot and delay (stitch) timers. Independent timers for MIG and spool gun. •Heavy-duty aluminum, two-drive-roll system •Fan-On-Demand™ cooling system only operates when needed reducing power consumption and keeping internal components cleaner •Superior aluminum MIG welding with direct connection of optional XR™ push-pull guns, Spoolmatic®/Spoolmatic Pro and Spoolmate™ 200 spool guns. No extra module to buy or install.Processes:•MIG (GMAW) • Flux-Cored (FCAW)Comes Complete with: 15 ft. (4.5 m), 250-amp M-25 gun, 10 ft. (3 m) work cable with clamp, 10 ft. (3 m) industrial power cord (and plug on 200/230 V model), Factory-installed gas solenoid, Flow gauge regulator and gas hose for argon or AR/CO2 mix, Factory-installed lowered running gear/cylinder rack, .030/.035” reversible dual-groove drive rolls, and Extra contact tipsPart No. 907321, Millermatic 252. 200(208)/230 V.Part No. 951066, Millermatic 252. 200(208)/230 V. Comes with With Spoolmatic 30A, regulator, gas hose and dual cylinder rack.Part No. 907322, Millermatic 252. 230/460/575 V.Part No. 951065, Millermatic 252. 230/460/575 V. Comes with With Spoolmatic 30A, regulator, gas hose and dual cylinder rack.Part No. 300337, Dual EZ-Change™ Low Cylinder Rack.Part No. 300335, Elevated Gun and Cable Rack. Part No. 195142, Protective Cover.

Model No.

Model No.

Amperage Range

Amperage Range

Rated Output

Rated Output

Wire Feed Speed

Wire Feed Speed

Machine Only Dimensions

Machine Only Dimensions

Machine Only Net Weight

Machine Only Net Weight

Wire Type and Diameter Capacity


200 V

200 V 230 V 460 V 575 V KVA KW

230 V KVA KWAmps Input at Rated Output, 60 Hz

Amps Input at Rated Output, 60 Hz

200(208) 30–210 160 A at 24.5 VDC, 31 28 6.2 5.2 /230 V 60% duty cycle

200(208) 200 A at 28 VDC, 48 42 — — 9.5 7.5 /230 V 60% duty cycle 230/460/ 250 A at 28 VDC, — 46 23 18 9.5 7.5 575 V 40% duty cycle

30”H x 19”W x 40”D

(762 mm x 483 mm x 1,016 mm)

30”H x 19”W x 40”D

(762 mm x 483 mm x 1,016 mm)

Mild Steel Welding CapabilityModel 212: Min - 22 ga. (0.9 mm) Max - 3/8” (9.5 mm)

Aluminum Welding CapabilityModel 212: Min - 14 ga. (1.9 mm) Max - 3/8” (9.5 mm)

50–700 IPM(1.3 –17.8 m/min.)

50–700 IPM(1.3 –17.8 m/min.)

Solid Steel .023 –.035” (0.6 – 0.9 mm)Stainless .023 –.035” (0.6 – 0.9 mm)

Flux-Cored .030 –.045” (0.8 –1.2 mm)

Solid Steel .023 –.045” (0.6 –1.2 mm)Stainless .023 –.045” (0.6 – 1.2 mm)

Flux-Cored .030 –.045” (0.8 –1.2 mm)

183 lb. (83 kg)

205 lb. (94 kg)

Millermatic® 212

Millermatic® 252 30–300

Input Power

Input Power

(at 60% duty cycle)

Mild Steel Welding CapabilityModel 252: Min - 22 ga. (0.9 mm) Max - 1/2” (13 mm)


Millermatic® 211 Auto-Set™ with MVP™•Auto-Set makes setup quick and easy. On the Millermatic 211, it works with .030 and .035” wire. •Infinite voltage control - When used in manual mode provides broader operating range with finer control than a tap machine. •Welds thickest material in its class - up to 3/8” (9.5 mm)! •Multi-voltage plug (MVP™) allows connection to 115 or 230-volt receptacles without tools •Heavy-duty aluminum drive system is de-signed to provide superior feeding and durability. The toolless, quick-change reversible drive rolls and easy-to-set scaled tension knob make it the easiest to use in the industry. •Thermal overload protection - Designed to protect your investment, every Millermatic is now equipped with built-in thermal overload protection. •Smooth-Start™ technology provides smooth, spatter-free starts — no pop gun starts and no spat-ter to clean up •”Tip saver” shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. •Uses 4 or 8” (102 or 203 mm) spoolsProcesses:•MIG (GMAW) • Flux-Cored (FCAW)Comes Complete with: 10 ft. (3 m) M-100 MIG gun and cable assembly (#248282), 10 ft. (3 m) work cable with clamp, 6 ft. (1.8 m) power cord with MVP plugs for 115 V and 230 V, Factory-installed gas solenoid valve, Dual groove quick-change drive rolls for .024” (0.6 mm) or .030/.035” (0.8/0.9 mm) wire, Flow gauge regulator and gas hose for argon or AR/CO2 mix, extra contact tips, Hobart® spool of solid wire, information/settings chart, and material thickness gauge (#229895)Part No. 907422, Millermatic 211.Part No. 951375, Millermatic 211 with standard running gear/cylinder rack.Part No. 300371, Spoolmate™ 100.

Mild Steel Welding CapabilityModel 211: Min - 24 ga. (0.8 mm) Max - 3/8” (9.5 mm)


MVP allows connection to120 V and 230 V receptacles.

Model No. Input Power

Amperage Range Rated Output Wire Feed Speed Machine Only



120 V 230 V KVA KWAmps Input at Rated Output, 60 Hz

120 VAC 30–140 90 A at 20 V, 20 — 2.9 2.5 20% duty cycle 230 VAC 30–210 150 A at 23.5 V, — 24.3 5.5 4.8 30% duty cycle

15¾”H x 10.63”W x 17½”D

(400 mm x 270 mm x 445 mm)

60– 540 IPM(1.5 – 13.7 m/min.)

Solid Steel .023 –.035” (0.6 – 0.9 mm)Stainless .023 –.035” (0.6 – 0.9 mm)

Flux-Cored .030 –.045” (0.8 –1.2 mm)74 lb. (33.6 kg)Millermatic® 211

Part No. 301239, Running Gear/Cylinder Rack.Part No. 195149, Protective Cover.Part No. 202926, V-Knurled Drive Roll.


MILLER®


CP-302•Cost-effective, simple MIG power source designed for manufacturing •Large analog meters are easy to read and display preset and actual voltage and amperage •14-pin receptacle provides a quick, direct connection to Miller® wire feeders •115-VAC power for tools and coolant systemsProcesses:•MIG (GMAW) •Flux-Cored (FCAW) •Air Carbon Arc Gouging (CAC-A)

Deltaweld® SERIES•Industry standard for industrial MIG welding. Designed for manufacturing operations, with 100% duty cycle for extended arc-on time. •Line voltage compensation ensures consistent weld performance even when primary power varies •Fan-On-Demand™ cooling system operates only when needed. Reduces contaminants drawn into the machine and excess noise in work areas. •Digital meters are easy to read and display preset and actual voltage and amperage •14-pin receptacle provides a quick, direct connection to Miller® wire feeders. Capable of remote voltage control. •115-VAC power for tools and coolant systems •Thermal overload protection light indicates power shutdown. Helps prevent machine damage if the duty cycle is exceeded or airflow is blocked.Processes:•MIG (GMAW) •Flux-Cored (FCAW) •Air Carbon Arc Gouging (CAC-A); (Deltaweld 452: 1/4” carbons) (Deltaweld 652: 3/8” carbons)

Model

Model

Rated Output Dimensions(Includes lift eye and strain relief) Net WeightOpen-Circuit

Voltage200 V 230 V 460 V 575 V KVA KWAmps Input at Rated Output, 60 Hz

CP-302 14–44 300 A at 32 VDC, 100% duty cycle 38 33 16.5 — 13.1 12.3 14– 44 VDC 332 lb. (151 kg)Deltaweld 302 10–32 300 A at 32 VDC, 100% duty cycle 48 42 21 17 16.9 12.9 42 VDC max. 323 lb. (147 kg)Deltaweld 452 10–38 450 A at 38 VDC, 100% duty cycle 72 63 32 25 25.1 21.1 48 VDC max. 384 lb. (174 kg)Deltaweld 652 10–44 650 A at 44 VDC, 100% duty cycle — 96 48 38 38.2 34.2 54 VDC max. 472 lb. (214 kg)

30”H x 23”W (762 mm x 585 mm)

302: 30.5”D (775 mm)452/652: 38”D (966 mm)

VoltageRange

Input Power Power Source OnlyPart No.

Stationary PackagePart No.

MIGRunner PackagePart No.

Stationary package includes:Power source • 22A (CP-302) or S-74D (Deltaweld) feeder with .035/.045" drive rolls, Bernard™ Q300 (CP-302) or Q400 (Deltaweld) MIG gun, Industrial MIG 4/0 kit consisting of flowmeter regulator with 10 ft. (3 m) gas hose, 10 ft. (3 m) 4/0 feeder weld cable with lugs, and 15 ft. (4.6 m) work cable with 600-amp C-clamp.MIGRunner™ package includes:Items shown above plus Factory-installed standard running gear and standard cylinder rack

CP-302 200/230/460 V 903786 951231 951230Deltaweld 302 200-208/230/460 V 903376 951235 951234 230/460/575 V 903392 — 951300Deltaweld 452 200-208/230/460 V 903377 951237 951236 230/460/575 V 903394 951301 951302Deltaweld 652 230/460/575 V 903396 951239 951238

(302 Model) (452/652 Models)

Part No. 042886, Standard Running Gear.Part No. 042887, Standard Cylinder Rack.Part No. 300390, Industrial MIG 4/0 Kit (with lug connectors).Part No. 247831025, 25 ft. Extension Cables (7.6 m)Part No. 247831050, 50 ft. Extension Cables (15 m)Part No. 247831080, 80 ft. Extension Cables (24.4 m)

CP-302

Deltaweld

Millermatic® 350P•Built-in Pulsed MIG programs. All programmed information is restored after each power up — aluminum/steel/stainless steel/metal-cored. •In-finite voltage control with self-calibrating digital meters that permit presetting of voltage and wire feed speed. Ensures precise parameters and accuracy. •Auto-Gun Detect™ automatically adjusts voltage, wire speed and timers for faster switching between MIG, push-pull and spool guns •Integrated digital timers come complete with presettable preflow/postflow and spot timers. Independent timers for MIG and push-pull guns •Heavy-duty aluminum, four-drive-roll system •Fan-On-Demand™ cooling system only operates when needed reducing power consumption and keeping internal components cleanerProcesses:•MIG (GMAW) • Flux-Cored (FCAW) • Pulsed MIG (GMAW-P)Comes Complete with: 15 ft. (4.5 m) Bernard™ Q300 MIG gun with Centerfire™ consumables, 10 ft. (3 m) work cable with clamp, 10 ft. (3 m) industrial power cord (without plug) for single- or three-phase, Factory-installed gas solenoid, Flow gauge regulator and gas hose for argon or AR/CO2 mix, Factory-installed, low-mounted running gear/cylinder rack, .035/.045” reversible V-groove drive rolls (order U-groove drive rolls for aluminum welding), and Extra contact tipsPart No. 907300, Millermatic 350P. 200/230/460 V.Part No. 195299, Dual Cylinder Rack.Part No. 195142, Protective Cover.

Model No. Amperage Range Rated Output Wire Feed Speed Machine Only



200 V 230 V 460 V KVA KWAmps Input at Rated Output, 60 Hz

Three- 34 30 15 11.6 11.5 phase Single- 69 61 30 13.1 11.2 phase

34”H x 19”W x 41”D

(863 mm x 483 mm x 1,041 mm)

Mild Steel Welding CapabilityModel 350P: Min - 24 ga. (0.8 mm) Max - 1/2” (13 mm)

Aluminum Welding CapabilityModel 350P: Min - 18 ga. (1.2 mm) Max - 1/2 in. (13 mm)

MIG Gun50–700 IPM

(1.3–17.8 m/min.)Optional Spool

Gun/Push-Pull Gun50–800 IPM

(1.3–20 m/min.)

Solid Steel .023 –.045” (0.6 –1.2 mm)Stainless .030 –.045” (0.8 –1.2 mm)Aluminum .035 –.047” (0.9 –1.2 mm)

Metal-Cored .035 –.052” (0.9 –1.3 mm)Flux-Cored .030 –.052” (0.8 –1.3 mm)

181 lb. (82 kg)Millermatic® 350P

25–400300 A at 32 VDC,60% duty cycle

Input Power

Please see pg. SP04-02 for more information about the Miller Welding icons and symbols.


MILLER®


Invision™ MPa PLUS SYSTEM•MIG and synergic Pulsed MIG system with optimized weld programs for both steel and aluminum •Built-in MIG and Pulsed MIG programs automatically set the optimal parameters for a wide variety of wires making it easy to set up and use •Synergic Pulsed MIG. As wire speed increases/decreases, pulse parameters also increase/decrease to match the right amount of power needed, eliminating the need to make additional adjustments •Profile Pulse™ provides TIG appearance with MIG simplicity and productivity. Achieve ”stacked dimes” without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance. •Invision 352 model allows for any input voltage hookup (208–575 V) with no manual linking. 450 model is 230/460 V manual link or 575 V, three-phase only. •Easy to set up. Select wire diameter, wire type and gas being used, set your wire speed and strike an arc. •Wind Tunnel Technology.™ Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability. •Fan-On-Demand™ cooling system operates only when needed, reducing noise, energy use and amount of contaminants pulled through machineProcesses:•MIG (GMAW) • Flux-Cored (FCAW) • Pulsed MIG (GMAW-P) • Air Carbon Arc Gouging (CAC-A); (Invision 352: 1/4” carbons) (Invision 450: 5/16” carbons)Part No. 907431, Invision 352 MPa Power Source Only. 208–575 V.Part No. 907431001, Invision 352 MPa Power Source Only. 208–575 V with auxiliary power.Part No. 907485, Invision 450 MPa Power Source Only. 230/460 V with auxiliary power.Part No. 907486, Invision 450 MPa Power Source Only. 575 V with auxiliary power.Part No. 195445, MIGRunner™ Cart (single feeders only).Part No. 300408, Running Gear Cylinder Rack.Part No. 043007, Coolmate™ 3.Part No. 300405, Industrial MIG 4/0 Kits with Dinse connectors (352 MPa only).Part No. 300390, Industrial MIG 4/0 Kits with lug connectors (450 MPa only).Part No. 247831025, 25 ft. (7.6 m) Extension Cables.Part No. 247831050, 50 ft. (15 m) Extension Cables.Part No. 247831080, 80 ft. (24.4 m) Extension Cables.

Millermatic® 350P ALUMINUM•True torque feed motor push-pull design provides continuous push force to the wire while the gun motor controls the speed at the gun. The motors work together to provide accurate and positive wire feed speed without wire shaving or deformation. •Electronic wire spool brake allows wire spool to free spool while welding resulting in smooth wire delivery •Built-in aluminum Pulsed MIG programs for simplicity and improved puddle control. Pulsed welding virtually eliminates burnthrough and warping issues on thinner materials. •Synergic MIG and Synergic Pulsed MIG provide communication between power source, feeder and gun. As wire speed increases/decreases, the pulse or MIG parameters also increase/decrease to match the right amount of power needed. •Trigger schedule select allows operator to change between two sets of weld parameters •Trigger hold reduces operator fatigue on extended welds •Standard jog and purgeProcesses:• Aluminum MIG (GMAW) • Aluminum Pulsed MIG (GMAW-P)Comes Complete with: 10 ft. (3 m) work cable with clamp, 10 ft. (3 m) industrial power cord (without plug) for single- or three-phase, Factory-installed gas solenoid, Flow gauge regulator and gas hose for argon, Factory-installed, low-mounted running gear/cylinder rack, and .035- and .047” (0.9 and 1.2 mm) U-groove drive rolls for aluminum weldingPart No. 907474, Millermatic 350P Aluminum standard unit.Part No. 951451, Millermatic 350P Aluminum with 15-ft. XR-Aluma-Pro™ air-cooled gun.Part No. 951452, Millermatic 350P Aluminum with 25-ft. XR-Aluma-Pro™ air-cooled gun.Part No. 951453, Millermatic 350P Aluminum with 25-ft. XR™-Pistol Pro air-cooled gun.Part No. 951454, Millermatic 350P Aluminum with 25-ft. XR-Aluma-Pro™ Lite air-cooled gunPart No. 195299, Dual Cylinder Rack.Part No. 195142, Protective Cover.

Model PackagePart No.

70 Series MPA Plus Feeder with Bernard™ Q400Push-Only MIG Gun and .035/.045 Drive Rolls

XR-Aluma-Pro™ PlusPush-Pull MIG Gun

Industrial MIG 4/0 Kit Cart

951287 S-74 (single-wire feeder with one gun) 25-ft. air-cooled With Dinse connectors MIGRunner cart 951501 D-74 (dual-wire feeder with two guns) 25-ft. air-cooled With Dinse connectors Running gear cylinder rack 951411 S-74 (single-wire feeder with one gun) — With Dinse connectors MIGRunner cart 951500 D-74 (dual-wire feeder with two guns) — With Dinse connectors Running gear cylinder rack 951499 S-74 (single-wire feeder with one gun) — With lug connectors MIGRunner cart 951457 D-74 (dual-wire feeder with two guns) — With lug connectors Running gear cylinder rack

Invision 352 MPa

Invision 352 MPa

Invision 450 MPa

Invision 450 MPa

Package Includes

Model No. Amp/Volt Range Rated Output KVA KW Dimensions Net WeightMax. Open-

Circuit Voltage208 V 230 V 400 V 460 V 575 VAmps Input at Rated Output, 60 Hz

Three- 5 – 425 A 350 A at 34 VDC, 40.4 36.1 20.6 17.8 14.1 14.2 13.6 phase 10 – 38 V 60% duty cycle Single- 5 – 425 A 300 A at 32 VDC, 60.8 54.6 29.7 24.5 19.9 11.7 11.2 phase 10 – 38 V 60% duty cycle Three- 15–600 A 450 A at 36.5 VDC, — 49.4 — 27.2 23.6 21.6 18.3 phase 10 – 38 V 100% duty cycle (23.5 on 575 V)

17”H x 12.5”W x 24”D

(432 mm x 318 mm x 610 mm)

17.25”H x 14.5”W x 27.125”D

(438 mm x 368 mm x 689 mm)

75 VDC

90 VDC

80 lb. (36.3 kg)

122 lb. (55.3 kg)

Invision 352 MPa

Invision 450 MPa

Input Power

(Invision 450 is 3-phase only.)

Model No. Amperage Range Rated Output Wire Feed Speed Machine Only



200 V 230 V 460 V KVA KWAmps Input at Rated Output, 60 Hz

Three- 34 30 15 11.6 11.5 phase Single- 69 61 30 13.1 11.2 phase

34”H x 19”W x 41”D

(863 mm x 483 mm x 1,041 mm)

Optional Spool Gun/Push-Pull Gun

50–800 IPM (1.3–20 m/min.)

Aluminum .035 –.047” (0.9 –1.2 mm)

181 lb. (82 kg)Millermatic®

350P Aluminum 25–400300 A at 32 VDC,60% duty cycle

Input Power

Aluminum

Steel


MILLER®


AlumaFeed™ SYNERGIC ALUMINUM WELDING SYSTEM•AlumaPower™ 350 model allows for any input voltage hookup (208–575 V) with no manual linking. 450 model is 230/460 V manual link or 575 V, three-phase only •Synchronized, true push-pull wire feed system for precise wire feeding and arc performance •Profile Pulse™ provides TIG appearance with MIG simplicity and productivity. Achieve ”stacked dimes” without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance. •Synergic Pulsed MIG. As wire speed increases/decreases, pulse parameters also increase/decrease to match the right amount of power needed, eliminating the need to make additional adjustments. •Built-in MIG and Pulsed MIG programs automatically set the optimal parameters for a wide variety of wires making it easy to set up and use •Parameter and system locks enhance quality assurance and protect weld consistency •Trigger schedule select allows operator to change between two sets of weld parametersProcesses:•Aluminum MIG (GMAW) • Aluminum Pulsed MIG (GMAW-P)Part No. 907420, AlumaPower 350 MPa Power Source Only. 208–575 V.Part No. 907420001, AlumaPower 350 MPa Power Source Only. 208–575 V with auxiliary power.Part No. 907483, AlumaPower 450 MPa Power Source Only. 230/460 V with auxiliary power.Part No. 907484, AlumaPower 450 MPa Power Source Only. 575 V with auxiliary power.Part No. 195445, MIGRunner™ Cart.Part No. 043007, Coolmate™ 3.

Model PackagePart No.

XR-AlumaFeed FeederPart No.

XR-Aluma-Pro™ PlusPush-Pull MIG Gun

XR™-Pistol GripPush-Pull MIG Gun

Industrial MIG 4/0 Kit Coolmate™ with Coolant

Cart

951147 300509 25-ft. air-cooled — — — — 951149 300509 — 30-ft. air-cooled — — — 951151 300509 25-ft. air-cooled — With Dinse connectors — MIGRunner cart 951460 300509 25-ft. air-cooled — — — — 951459 300509 25-ft. air-cooled — With lug connectors — MIGRunner cart 951558 300509 — 30-ft. water-cooled — Coolmate 3 — 951559 300509 25-ft. water-cooled — With lug connectors Coolmate 3 MIGRunner cart

AlumaPower350 MPa

AlumaPower 450 MPa

Package Includes

Model No.

Model No.

Amp/Volt Range Rated Output KVA KW Dimensions

Dimensions

Net Weight

Net Weight

Max. Open-Circuit Voltage208 V 230 V 400 V 460 V 575 V


Three- 5 – 425 A 350 A at 34 VDC, 40.4 36.1 20.6 17.8 14.1 14.2 13.6 phase 10 – 38 V 60% duty cycle Single- 5 – 425 A 300 A at 32 VDC, 60.8 54.6 29.7 24.5 19.9 11.7 11.2 phase 10 – 38 V 60% duty cycle Three- 15–600 A 450 A at 36.5 VDC, — 49.4 — 27.2 23.6 21.6 18.3 phase 10 – 38 V 100% duty cycle (23.5 on 575 V)

24 VAC, 5 A, 400 A at 100% duty cycle 50– 900 IPM .035 –.062" (0.9 – 1.6 mm) Requires wire kit 12" (305 mm) 16”H x 9.5”W 50/60 Hz System duty cycle is limited (1.3–22.9 m/min.) #230708 for gun and drive roll kit #195591 for control x 21.25”D 42.5 lb. to gun rating. box to run 1/16” (1.6 mm) wire (406 mm x 241 (19.2 kg) mm x 540 mm)

17”H x 12.5”W x 24”D

(432 mm x 318 mm x 610 mm)

17.25”H x 14.5”W x 27.125”D

(438 mm x 368 mm x 689 mm)

75 VDC

90 VDC

80 lb. (36.3 kg)

122 lb. (55.3 kg)

AlumaPower350 MPa

XR-AlumaFeedWire Feeder*

AlumaPower 450 MPa

Input Power

Input Power Wire Feed Speed Maximum Spool Size Capacity

Input Welding Circuit Rating Wire Diameter Capacity

(AlumaPower 450 is 3-phase only.)

Note: All packages listed include gun drive rolls, feeder drive rolls and consumables for .035 and 3/64” (0.9 and 1.2 mm) wire. All systems come set up out of the box to run 3/64” wire. 1/16” consumables not included.

*14-pin compliant, but only operates synergically with MPa power sources

Part No. 043810, Coolant.Part No. 300405, Industrial MIG 4/0 Kits with Dinse con-nectors (350 MPa only).Part No. 300390, Industrial MIG 4/0 Kits with lug connec-tors (450 MPa only)Part No. 247831025, 25 ft. (7.6 m) Extension Cables.Part No. 247831050, 50 ft. (15 m) Extension Cables.Part No. 247831080, 80 ft. (24.4 m) Extension Cables.

Multiprocess WeldersMultimatic™ 200•The only all-in-one, portable, multiprocess power source from Miller® is highly versatile •Weighing only 29 lbs. (13.2 kg) and running on either 120 or 230 volts, the Multimatic 200 can go anywhere you need to MIG, TIG or Stick weld •Multi-voltage plug (MVP™) allows connection to 115 or 230-volt receptacles without tools •Auto-Set™ Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Simple to set up and use! •Excellent arc characteristics! Unit offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2. •Impact-resistant case provides strength and durability while protecting the internal components and welding wireProcesses:•MIG (GMAW) •Flux-Cored (FCAW) •DC Stick (SMAW) •DC TIG (DC GTAW)Comes Complete with: 10-ft. (3 m) Bernard™ Q150 MIG gun, 13 ft. (4 m) cable with electrode holder and 25 mm Dinse connector, 10 ft. (3 m) work cable with clamp and 25 mm Dinse connector, Power cord with MVP plugs for 115 V and 230 V, Quick Select™ drive roll for .024” (0.6 mm) or .030/.035”(0.8/0.9 mm) solid wire, and .030/.035” (0.8/0.9 mm) flux-cored wire, Flow gauge regulator and gas hose for argon or AR/CO2 mix, extra contact tips, information/settings chart and material thickness gauge (#229895)Part No. 907518, Multimatic™ 200. 120/230 V.Part No. 300507, 14-Pin to 6-Pin Adapter Cord.Part No. 195184, RCCS-6M Remote Fingertip Control.

WeldingMode/Process

Input Power

Amperage Range Rated Output Wire Feed Speed Dimensions Net WeightMax. Open-Circuit Voltage

120 V 230 V KVA KWAmps Input at Rated Output, 50/60 Hz

CV: MIG/ 120 VAC 30–140 90 A at 18.5 V, 60% duty cycle 18 — 2.2 2 70– 425 IPM 90 VDC 14.5”H x 9.75”W 29 lb. (13.2 kg)Flux-Cored 110 A at 19.5 V, 20% duty cycle 20 — 2.7 2.6 (1.8–10.8 m/min.) x 17”D 230 VAC 30–200 150 A at 21.5 V, 20% duty cycle — 17.5 4.0 3.8 (368 mm x CC: TIG 120 VAC 5–150 150 A at 16 V, 30% duty cycle 27 — 3.3 3.2 90 VDC (22 – 25 VDC, 248 mm x 230 VAC 5–150 150 A at 16 V, 30% duty cycle — 13.8 3.2 3.0 sense voltage for Stick and 432 mm)CC: Stick 120 VAC 20–150 100 A at 24 V, 35% duty cycle 24 — 2.9 2.8 Lift-Arc™ TIG) 230 VAC 20–150 150 A at 26 V, 30% duty cycle — 20.8 4.8 4.5


MILLER®

Multiprocess WeldersMLR/2777/2784

Shopmate™ 300 DX•An economical single-phase DC multiprocess power source that provides versatility and outstanding arc performance in CV mode (MIG) and CC mode (Stick and TIG) •Process selector switch is an ”operator-friendly” single process switch that eliminates the confusion of several switch combinations •Digital meters for presetting or monitoring voltage and amperage •Built-in 10-pin connector for direct hookup of Spoolmatic® spool guns and built-in 14-pin connector for direct hookup of 14-pin, Miller wire feeders and accessories •Fan-On-Demand™ cooling system operates only when needed •Line voltage compensation keeps welding parameters constant •Arc control adjusts inductance in MIG mode and DIG in Stick mode to optimize weld performance •Lift-Arc™ start provides DC TIG arc starting without the use of high frequency. Starts the arc without contaminating the weld with tungsten.Processes:•MIG (GMAW) •Flux-Cored (FCAW) •DC Stick (SMAW) •DC TIG (DC GTAW)MIG Package Comes Complete with: 22A wire feeder with Bernard™ gun, Shopmate 300 MIG kit consisting of flow gauge regulator and 10 ft. (3 m) gas hose for argon or AR/CO2 mix, 10 ft. (3 m) 1/0 interconnecting cable, 15 ft. (4.6 m) 1/0 work cable with clamp, and consumable storage box.Part No. 907315, Shopmate™ 300 DX. 200(208)/230 V Machine only.Part No. 907316, Shopmate™ 300 DX. 230/460/575 V Machine only.Part No. 951076, Shopmate™ 300 DX. 200(208)/230 V with MIG package.Part No. 951077, Shopmate™ 300 DX. 230/460/575 V with MIG package.Part No. 300145, Shopmate Running Gear/Dual Cylinder Rack.Part No. 300150, Shopmate 300 MIG Kit .

PipeWorx WELDING SYSTEMSimple process setup: •The front panel was designed by welders for welders •Requires just a few basic steps to set up a new weld process, resulting in less training time and minimizing errors from incorrect setups •Memory feature stores four programs for each selection: Stick, DC TIG, and MIG (left and right side of feeder). Eliminates the need to remember parametersTrue multiprocess machine: •Weld processes are optimized to deliver superior arc performance and stability specifically for root, fill, and cap passes on pipe •RMD and Pulsed MIG increase quality and productivityQuick process changeover: •Simply push a process selection button to choose a welding process •Eliminates set-up time and reduces the risk of weld reworks due to incorrect cable connections •PipeWorx ”Quick Select” technology automatically selects the welding process, the correct polarity, cable outputs, gas solenoid, and user-programmed welding parametersSingle-system design: •One machine designed to perform all of your pipe welding needs •Simplified and optimized specifically for pipe weldingProcesses:•Stick (SMAW) •DC TIG (GTAW) (HF and Lift-Arc™) •MIG (GMAW) •Flux-Cored (FCAW) •RMD •Pulsed MIG (GMAW-P)Comes Complete with: Power source with cable hangers, Running gear with gas cylinder rack and handles, Dual feeder with drive rolls, Cable kit with 25 ft. (7.6 m) work sense lead, and Two 15 ft. (4.6 m) PipeWorx 300 gunsPart No. 951381, 230/460 V PipeWorx Welding SystemPart No. 951382, 575 V PipeWorx Welding SystemPart No. 907382, 230/460 V PipeWorx Power Source onlyPart No. 907384, 575 V PipeWorx Power Source onlyPart No. 300365, Single-wire PipeWorx Feeder model onlyPart No. 300366, Dual-wire PipeWorx Feeder model onlyPart No. 057607, Single/dual feeder (left) Spool Cover.Part No. 090389, Dual feeder (right) Spool Cover.Part No. 194744, RFCS-14 HD Foot Control.

Amperage Range

Voltage Range Rated Output Max. Open-

Circuit VoltageDimensions

(Includes lift eye)Net Weight

208 V 230 V 460 V 575 V KVA KWAmps Input at Rated Output, 60 Hz

5 – 400 10 – 35 250 A at 30 VDC, 66 57 29 23 13 11.2 80 VDC 177 lb. (80.3 kg) 60% duty cycle

24.5”H x 19”W x 25.5”D (622 mm x

483 mm x 648 mm)

Part No. Input Power

Welding Mode/

Process

Amp/Voltage Ranges

Rated Output at 100% Duty

Cycle

Amps Input at RatedOutput, 60 Hz, 3-Phase KVA KW Max. Open-

CircuitVoltage

Dimensions Net Weight230 V 460 V 575 V 230 V 460 V 575 V 230 V 460 V 575 V

951381 230/460 V CC: Stick 40– 400 A 400 A at 36 VDC 43.9 26.6 22.4 17.5 21.2 22.3 16.1 16.3 16.4 90 VDC28.5”H x 19.5”W x 31.75”D (724 mm x 495 mm x 806 mm)

225 lb.(102 kg)951382 575 V CC/DC: TIG 10– 350 A 350 A at 24 VDC 29.3 18.2 13.5 11.8 14.5 13.4 10.7 10.6 10

907382 230/460 V CV: MIG/Flux-Cored 10– 44 V 400 A at 34 VDC 42.9 24 20.5 17.3 19.2 20.5 16 15.8 16.2

907384 575 V

Input Power

Input WeldingCircuit Rating Wire Feed Speed Wire Diameter

CapacityMaximum Spool

Size Capacity Dimensions Net Weight

24 VAC, 11 A

100 V, 750 A at100% duty cycle

50–780 IPM(1.3 –19.8 m/min.)

.035 –.062”(0.9 – 1.6 mm) 60 lb. (27 kg)

14”H x 19”W x 29”D (356 mm x 483 mm x 737 mm)

Single 65 lb. (29.5 kg)Dual 90 lb. (41 kg)

PipeWorx Feeder



XMT® SERIES WELDERS Portability and excellent multiprocess arc performance make the XMT family the most popular in the industry. With many models to choose from the XMT family has the right solution for your business.Input Power Choices: •Auto-Link® (304 model) automatically links the power source to primary voltage being applied (230/460 VAC, single- or three-phase). (350 models) allows for any input voltage hookup. (208–575 VAC, single- or three-phase) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power. •Standard hookup (450 models). Available as 230/460 VAC manual link or 575 VAC models, three-phase only.Advanced Features for the Professional Welder: •Adaptive Hot Start™ makes starting stick electrodes easy without creating an inclusion •Infinite arc control available in the Stick and Wire modes for easier fine tuning of tough-to-weld materials and out-of-position applications •Lift-Arc™ provides arc starting that minimizes contamination of the electrode and without the use of high frequency •Welding Information Management System. XMT 14-pin models are Insight capable to monitor weld voltage, amperage, and arc-time and percentage.Reliability: •Wind Tunnel Technology.™ Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability •Fan-On-Demand™ cooling system operates only when needed, reducing noise, energy use and amount of contaminants pulled through machineWelder Friendly Control Panel: •Process selector switch reduces the number of control setup combinations without reducing any features •Ultra-tough, polycarbonate-blended cover protects front controls from damage •Large, dual digital meters are easy to view and presettable to ease setting weld outputOutput Connector Choices: •Dinse- or Tweco®-style weld disconnects (304/350 models) provide high-quality weld cable connections. (Note: Two Dinse connectors are supplied with each Dinse machine. Tweco connectors must be ordered separately.) •Studs (450 models)Processes:•MIG (GMAW) •Pulsed MIG (GMAW-P)* •Stick (SMAW) •TIG (GTAW) •Flux-Cored (FCAW) •Air Carbon Arc Cutting and Gouging (CAC-A) (Carbons — 304: 1/4”, 350: 5/16”, 450: 3/8”)*Only XMT CC/CV models with optional control and XMT MPa models.

XMT® 304 CC/CV•Cost-effective multiprocess machine.•Auto-Link® automatically links the power source to primary voltage being applied (230 or 460 VAC, single– or three-phase).Part No. 951343, 208-230/460 V MIGRunner w/22A*.

XMT® 350 VS•This simplified version is ideal for construction or fabrication applications in which the 14-pin receptacle is not needed for remote control or 14-pin feeders.Part No. 907224, 208–575 V.

XMT® 350 CC/CV & 450 CC/CV•Flexibility and simplicity make this the most popular model. It has the core multiprocess capabili-ties along with the flexibility of a 14-pin for spool guns, feeders, and remote controls. •Stronger weld output for increased capabilities. The XMT 350 provides 24% more output than the 304 model for larger wires and stick electrodes. The XMT 450 provides 43% more output for Carbon Arc Gouging.

XMT 350 CC/CV (Dinse)Part No. 907161, 208–575 V.Part No. 907161-01-1, 208–575 V w/auxiliary power.Part No. 951549, 208–575 V with SuitCase XT 12VS*.Part No. 951327, 208–575 V MIGRunner with 22A*.Part No. 951314, 208–575 V MIGRunner with S-74D*.

XMT 450 CC/CV (1/2" stud)Part No. 907481, 230/460 V.Part No. 907482, 575 V.

XMT® 350 MPa & 450 MPa•Built-in pulse programs for manufacturing and fabrication applications that have benefits for standard steels, high-strength steels and aluminum •Pulse programs provide reduced heat affected zone, weld in all positions, great for thick-to-thin metal, good gap filling ability and faster travel speeds and deposition •SharpArc® controls the arc in Pulsed MIG mode and gives total control over the arc cone shape, puddle fluidity and bead profileAdditional features when using a 70 Series MPa Plus feeder or XR-AlumaFeed™ feeder.•Synergic Pulsed MIG — As you increase/decrease the wire feed speed, the pulse param-eters increase/decrease, matching the right amount of power output to match the wire speed, eliminating the need to make additional adjustments •Profile Pulse™ provides TIG appearance with MIG simplicity and productivity. Achieve "stacked dimes” without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance. •Added capabilities with Insight Core™. When using an MPa Plus feeder, wire deposition is added to the Insight Core capabilities

XMT 350 MPaPart No. 907366, 208–575 V.Part No. 907366-01-1, 208–575 V w/auxiliary power.Part No. 907366-01-4, 208–575 V w/Tweco.XMT 450 MPa (1/2" stud)Part No. 907479, 230/460 V.Part No. 907479001, 230/460 V with auxiliary power.Part No. 907480, 575 V.Part No. 907480001, 575 V with auxiliary power.

XMT® 350 & 450 ArcReach™ Systems•Remote control of the power source without a cord. With an ArcReach-equipped SuitCase® feeder and power source you can change the output voltage at the feeder, and save a trip to the power supply. No extra control cable to purchase, maintain, string or unstring— saving time and money. •More arc-on time and reduced exposure to workplace hazards for operators can be realized using ArcReach because less time is spent going back to the XMT to set process and arc voltage •Automatic process select to MIG/FCAW (with gas) if DCEP is detected or FCAW (no gas) if DCEN is detected, when ArcReach communication is established between the feeder and the XMT. Reduces need to access XMT •Automatic return to panel settings on XMT when ArcReach communication is terminated. For example, if the XMT is set to gouging at 350 amps and an ArcReach feeder is connected, the XMT will go to a MIG/FCAW process. If the feeder is disconnected, the XMT will go back to its previous setting (gouging at 350 amps). •Less operator fatigue by not needing to move or reposition both heavy secondary weld leads bundled with control cords on the worksite. Control cables are not used. •Operator can precisely set arc voltage at the feeder and monitor the actual arc voltage and current delivered to the weld using the digital meters on the feeder. This removes guesswork when it comes to adhering to weld procedures. •Remote override of XMT. When an ArcReach feeder is connected to an XMT the feeder has full control and the XMT controls are disabled. •Save time by no longer needing to troubleshoot welding system problems that result from damaged control cords •Eliminate costly control cord repairs because control cords are not used •Fleet compatibility. Works with any SuitCase feeder, but ArcReach benefit is realized with the ArcReach system.Part No. 907224002, XMT 350 ArcReach (Tweco®). 208–575 V.Part No. 907481002, XMT 450 ArcReach (1/2" stud). 230/460 V.

MILLER®

XMT® Multiprocess WeldersMLR/2777/2784

(XMT 450 is 3-phase only.)

*Feeders include gun and drive rolls. MIGRunners add Industrial MIG 4/0 Kit and MIGRunner Cart.


MILLER®

XMT® Multiprocess WeldersMLR/2777/2784

Model InputPower

Amp/VoltRanges Rated Output

Max.Open-CircuitVoltage

Dimensions Net Weight

XMT 304 CC/CV 1-phase 5–400 A 10–35 V

225 A at 29 VDC, 60% duty cycle 90 VDC 17”H x 12.5”W x 24”D (432 mm x 318 mm x 610 mm)

79.5 lb. (36.1 kg)

XMT 350 CC/CV 3-phase 5–425 A 10–38 V

350 A at 34 VDC, 60% duty cycle 75 VDC 17”H x 12.5”W x 24”D (432 mm x 318 mm x 610 mm)

80 lb. (36.3 kg)

XMT 350 VS (no remote control) 1-phase 5–425 A 10–38 V

300 A at 32 VDC, 60% duty cycle**XMT 350 MPaXMT 350 ArcReachXMT 450 CC/CV 3-phase 15–600 A

10–38 V450 A at 38 VDC, 100% duty cycle 90 VDC 17.25”H x 14.5”W x 27.125”D

(438 mm x 368 mm x 689 mm)122 lb. (55.3 kg)

XMT 450 MPa 450 A at 36.5 VDC, 100% duty cycleXMT 450 ArcReach 450 A at 38 VDC, 100% duty cycle

Most popular accessories for non-VS models: Part No. 300509, XR-AlumaFeed™ Feeder for aluminum . Part No. 043389, Optima™ MIG Pulse Control.

Most popular accessories for all modelsPart No. 042537, Cylinder Cart.Part No. 195445, MIGRunner™ Cart.Part No. 300408, Running Gear Cylinder Rack.

Part No. 300405, Industrial MIG 4/0 Kit for XMT 304/350.Part No. 300390, Industrial MIG 4/0 Kit for XMT 450.Part No. 195478, Protective Cover (XMT 304/350 only).

Part No. 195286, Gas Valve Kit for XMT 350. Part No. 300928, Gas Valve Kit for XMT 450.

XMT® RACKS•XMT Rack conveniently houses multiple power sources for multiple welders. This is an ideal system for onsite applications including construction and shipbuilding. •Custom build your own rack by mix and matching XMT 304 CC/CV, 350 CC/CV, 350 VS, 350 MPa, 450 CC/CV and 450 MPa. (Rack holds a maximum of four of the XMT 450 models.) •All racks with factory-equipped power sources include fuses to provide primary power line protection for each inverter power supply on 460 or 575 VAC. (XMT 304 and 350: 20-amp fuses, XMT 450: 30-amp fuses.) Four-rack and six-rack models are avail-able and come with two lift eyes for transportation and rugged skids for dragging or pushing. •Lift truck side and end pockets in base for forklift loading and worksite repositioning. Rack roof panel and power source shelves are fabricated from galvanized steel and painted for added protection in harsh environments. •Liquid-tight strain reliefs designed to resist salt water, alcohol, oil, grease and common solvents are provided on both the welding power source and electrical junction box •Isolated work terminal provides a connection point for common workpiece construction •Meets IP23 which is more stringent than IP23S or IP23M ratings •One connection allows up to six inverters to be connected with one primary power drop

Model No. 4 UnitsPart No.

6 UnitsPart No.Style Style Input Power to Rack

XMT 304 CC/CV Rack 907292 Dinse 907291 Dinse 3-phase, 230/460 VAC, 60 Hz (20 A fuses included) 4 Units: 560 lb. (254 kg)XMT 350 VS Rack — — 907228 Tweco® 3-phase, 208 – 575 VAC, 50/60 Hz (20 A fuses included) 6 Units: 712 lb. (323 kg)XMT 350 CC/CV Rack 907231 Dinse 907232 Dinse 4 Units 599 lb. (272 kg) 907407 Tweco® 907406 Tweco® 6 Units 759 lb. (344 kg)XMT 450 CC/CV Rack 907607 1/2” studs — — 3-phase, 230/460 VAC, 60 Hz (30 A fuses included) 780 lb. (354 kg) 907608 1/2” studs — — 3-phase, 575 VAC, 60 Hz (30 A fuses included)Empty Rack 195466 - Can contain XMT 304 or 350 (6 units); XMT 450 (4 units). 279 lb. (127 kg)

Dimensions(Includes lift eye) Net Weight

59.375”H x 43”W x 34.375”D

(1,508 mm x 1,092 mm x 873 mm)


XMT® SERIES WELDERS

**Duty cycle rating below achieved with 6-gauge input power cord (8-gauge cord supplied with unit).


MILLER®

SuitCase® Wire FeedersMLR/2777

SuitCase® SERIES PORTABLE FEEDERSPortable SuitCase feeders that set the standard for performance and provide extreme reliability to stand up to the demands of construction and fabrication.Setting the standard for performance: •Heavy-duty drive motor with tachometer control provides wire feed speed that is accurate and consistent from the start of the weld to the finish and from one weld to the next. Consistent wire feed speed is very important with large-diameter cored wire, because small changes in wire feed speed make large changes in deposition rates. •Front panel has trigger hold, wire jog, and gas purge for easy operator access. (X-TREME™ feeders only.) •Wide voltage range for small and large wires with no contactor chatter or arc outages •Ultra-low drag inlet guide pins make loading the wire easy and does not deform the wire on the way into the drive rolls improving wire feeding performance •Scaled wire pressure knob provides easy adjust-ment and consistent pressure on the drive rolls and wire •Digital meters with SunVision™ technology can display voltage, wire feed speed, and also amperage if desired. Meters can be seen clearly even in direct sunlight. (Meters are optional on 8VS.)Unique and durable case: •Impact-resistant, flame-retardant case provides strength and durability, and protects components and welding wire from moisture, dust and other contaminants •Built-in slide rails allow you to drag the feeder into position for welding •Innovative feeder door design allows you to change wire while feeder is standing upright or laying down •Case is available in two sizes. (X-TREME™ feeders only.)Extreme reliability: •Potted and trayed main printed circuit board for the harshest environments adds exceptional reliability. Board has full-trigger isolation so a shorted gun trigger will not affect feeder operation. •Gun locking tab works with guns having corresponding locking grooves to prevent gun from being pulled out if the feeder is dragged by the gun •Gas inlet recessed into back of case is protected from incidental contact by the weld cable, ensuring consistent and contaminant-free shielding gas delivery to the gun. Double-filtered gas valve helps keep dirt from clogging and affecting gas flow.

SuitCase® X-TREME™ 8VS & 12VS•Voltage-sensing feeders designed to run off of arc voltage from almost any welding power source •8VS model is sized for an 8” spool of wire, can be carried to remote welding sites and fits through a 14” manhole/manway •12VS model is sized for an 8 or 12” spool of wire •12” spools are the most common in structural steel and fabrication

SuitCase® X-TREME™ 8VS & 12VS ArcReach™•Remote control of the power source without a cord •With an ArcReach-equipped SuitCase® feeder and power source you can change output voltage at the feeder, and save a trip to the power supply. •No extra control cable to purchase, maintain, string or unstring—saving time and money

SuitCase® 12RC•Standard remote voltage control saves the operator a trip back to the power supply for welding adjustments •For applications where the feeder is within 100 feet of the power source and control cords are acceptable

Processes:• MIG (GMAW) • Flux-Cored (FCAW)Comes Complete with: Bernard™Q300 MIG gun with reversible dual size (.045 and 1/16”) VK drive rolls. 12VS model is also available with Dura-Flux™Flux-Cored gun with reversible dual size (.068/.072 and 5/64”) VK drive rolls. ArcReach™models are also available with Bernard S-Gun™ with reversible dual size (.045 and 1/16”) VK drive rolls.Part No. 951583, SuitCase X-TREME 8VS with Bernard Q300 gun (no meters).Part No. 951582, SuitCase X-TREME 8VS with Bernard Q300 gunPart No. 951543, SuitCase X-TREME 12VS with Bernard Q300 gunPart No. 951544, SuitCase X-TREME 12VS with Bernard Dura-Flux gunPart No. 951588, SuitCase X-TREME 8VS ArcReach with Bernard S-GunPart No. 951584, SuitCase X-TREME 8VS ArcReach with Bernard Q300 gunPart No. 951589, SuitCase X-TREME 12VS ArcReach with Bernard S-GunPart No. 951581, SuitCase X-TREME 12VS ArcReach with Bernard Q300 gunPart No. 951580, SuitCase 12RC with Bernard Q300 gunPart No. 951599, SuitCase 12RC with Bernard Q300 gun, lift eye, and flowmeterSUGGESTED POWER SOURCES•Invision™ MPa Series •Dimension™ Series •XMT® Series (VS model not compatible with RC feeder) •Bobcat™ Series •Trailblazer® Series •Big Blue® SeriesNote: Full functionality of ArcReach is only available with ArcReach power sources. RC feeder requires power source with 14-pin connector.SUGGESTED GUNS•Bernard™ Q300 (GMAW) •Bernard™ S-Gun™ (GMAW) •Bernard™ Dura-Flux™ (FCAW) •Roughneck® (GMAW) • Ironmate™ FC-1260 (FCAW)

Model No. Input Power Input WeldingCircuit Rating

Maximum Spool

Size CapacityDimensions Net WeightWire Feed Speed Wire Type and Diameter Capacity

SuitCase X-TREME 8VS 330 A at Solid Wire .023 –.052” (0.6 –1.4 mm) 8” (203 mm), 12.75”H x 7.25”W x 18”D 28 lb. (13 kg) 60% duty cycle Flux-Cored .030 – 5/64” (0.8 – 2.0 mm) 14 lb. (6.4 kg) (324 mm x 184 mm x 457 mm)SuitCase X-TREME 12VS 425 A at Solid Wire .023 –.052” (0.6 –1.4 mm) 12” (305 mm), 15.5”H x 9”W x 21”D 35 lb. (15.9 kg) 60% duty cycle Flux-Cored .030 – 5/64” (0.8 – 2.0 mm) 45 lb. (20 kg) (394 mm x 229 mm x 533 mm)SuitCase X-TREME 8VS 330 A at Solid Wire .023 – .062” (0.6 – 1.6 mm) 8” (203 mm), 12.75”H x 7.25”W x 18”D 28 lb. (13 kg)ArcReach 60% duty cycle Flux-Cored .030 – .062” (0.8 – 1.6 mm) 14 lb. (6.4 kg) (324 mm x 184 mm x 457 mm)SuitCase X-TREME 12VS 425 A at Solid Wire .023 – 5/64” (0.6 – 2.0 mm) 12” (305 mm), 15.5”H x 9”W x 21”D 35 lb. (15.9 kg)ArcReach 60% duty cycle Flux-Cored .030 – 5/64”(0.8 – 2.0 mm) 45 lb. (20 kg) (394 mm x 229 mm x 533 mm)SuitCase 12RC 24 VAC, 10 A, 425 A at 50–700 IPM Solid Wire .023 –.052” (0.6 –1.4 mm) 12” (305 mm), 15.5”H x 9”W x 21”D 31 lb. (14.1 kg) 50/60 Hz 60% duty cycle (1.3 –17.8 m/min.) Flux-Cored .030 – 5/64” (0.8 – 2.0 mm) 45 lb. (20 kg) (394 mm x 229 mm x 533 mm)

Operates on open-circuit voltage and arc voltage: 14– 48 VDC/110 Max. OCV

50–780 IPM (1.3 –19.8 m/min.) Actual range in CC mode is dependent on arc voltage applied

Use with CC (except 12RC model) and CV, DC power sources.



MILLER®

Wire FeedersMLR/2777/2784

20 SERIES INDUSTRIAL & 70 SERIES HEAVY-INDUSTRIAL BENCH FEEDERS•Designed for manufacturing, our popular bench feeders are available in two series with multiple models to fit your needs •Trigger hold allows the operator to make long welds without having to hold the trigger continuously. Reduces operator fatigue. •Miller® standard, quick-change drive rolls save time •Quick-release drive-roll pressure arm allows drive roll change without losing spring preload setting •Easy loading and threading of welding wire without having to release the drive-roll pressure arm •Each feeder includes a 15-foot Bernard Q300 (20 Series) or Q400 (70 Series) MIG gun (two with dual-wire models), plus a 10-foot 14-pin interconnecting cordAdditional Features for 70 Series Feeders: •Available in dual-wire models which allows two different wire types to be available on one feeder, avoiding downtime from changing spools and drive rolls •Toolless rotatable drive assembly allows operator to rotate the drive housing, allowing a straight path for wire flow •High-torque permanent-magnet motor, sealed ball bearing gear drive and solid-state speed and brake control are maintenance free for long life •Trigger dual schedule for easily changing weld parameters while welding. Achieves the best weld settings for different joint configurations. (DX and MPa models only.)22A & 24A•Simple and cost-effective feeders for industrial manufacturing and fabricating •Ideal for most high-duty-cycle applications requiring day-in/day-out trouble-free operation •On-board burnback and motor ramp control for excellent starting and stopping performance •Two gear-driven drive rolls on 22A and four gear-driven drive rolls on 24A provide smooth, positive wire feedAdditional features for 24A feeder: •Remote voltage control at feeder for easier adjustments in the weld cell •Adjustable run-in control for better arc-starting performance on a variety of wires •Four gear-driven drive rolls provide more consistent feeding on larger wire diameters

Processes:• MIG (GMAW) • Flux-Cored (FCAW) • Pulsed MIG (GMAW-P) with MPa Plus feeder and optional MPa power sourceComes Complete with: Models include Bernard™Q300 (20 Series) or Q400 (70 Series) MIG gun (two with D-74 models), .035/.045” drive rolls and Centerfire™contact tips.

Model No. Part No. InputPower

Wire Feed Speed

Wire Type andDiameter Capacity

Maximum SpoolSize Capacity

Features

22A 951190 - 22A 951191 Run-in control 22A 951192 Digital display and voltage control 24A 951193 - 24A 951194 Digital display S-74S 951196 Single-wireS-74D 951198 Single-wire S-74DX 951200 Single-wire with standard motorS-74DX 951202 Single-wire with low-speed motor S-74 MPa Plus 951291 Single-wire D-74S 951203 Dual-wire D-74D 951204 Dual-wire D-74DX 951206 Dual-wire

DimensionsNet

Weight

.023 –1/8” (0.6 – 3.2 mm) Low speed motor required for 1/8” (3.2 mm) diameter wire (factory option)

MPa Plus modelHard Wire: .035 –5/64” (0.9 – 2.0

mm)Aluminum**: .035 –.052” (0.9 –

1.3 mm)

22A: .023 – 5/64” (0.6 – 2.0 mm)

24A:.023 – 3/32” (0.6 – 2.4 mm)

60-lb. (27 kg) coil with optional wire reel

assembly #108008

24 VAC, 7 A, 50/60 Hz

75– 750 IPM(1.9 –19 m/

min.)

22A: 36 lb. (15.4 kg)

24A: 40 lb. (18 kg)

58 lb. (26 kg)

87 lb. (39.5 kg)

11”H x 10.75”W x 23.5”D (279 mm x 273 mm x 597 mm)

14”H x 12.5”W x 28”D (356 mm x 318 mm x 711 mm)

14”H x 21”W x 35”D(356 mm x 533 mm x 889 mm)

24 VAC,10 A, 50/60 Hz

50–780 IPM(1.3 –19.8 m/

min.)

SUGGESTED POWER SOURCES•CP-302 (22A only) •Deltaweld® Series •Invision™ MPa Series •Dimension™ Series •XMT® Series (except VS model)SUGGESTED GUNS•Bernard™ •XR-Aluma-Pro™ Plus and XR™-Pistol Plus

20 Series 70 Series

74 MPa Plus•Adds push-pull aluminum capabilities. Optimized with Invision™ MPa or XMT® MPa power sources. •Recommended aluminum solution. Dedicated XR Plus guns (gooseneck and pistol grip) work with MPa Plus feeders to coordinate wire feed speed of the gun and the feeder. This provides optimized aluminum feeding and welding performance. •Trigger schedule select saves time when switching between two weld settings by simply tapping gun trigger •Accu-Mate™ properly seats the MIG gun power pin for best feeding performance •Alumination™ gives you the ability to use the extended reach of a push-pull system for consistent, versatile and dependable aluminum wire feedingAdditional features when used with Invision MPa or XMT MPa power sources: •Synergic Pulsed MIG. As wire speed increases/decreases, pulse parameters also increase/decrease to match the right amount of power needed, eliminating the need to make additional adjustments •Profile Pulse™ provides TIG appearance with MIG simplicity and productivity. Achieve “stacked dimes” without gun manipulation. Profile Pulse frequency can be changed to increase or decrease the spacing between the ripple pattern to achieve the desired weld appearance.

74DX•Adds features for weld control and programs •Adjustable run-in control for improved arc starts •Dual schedule control allows the operator to switch between two preconfigured welding parameters without readjusting the machine, saving time and enhancing quality •Trigger program select provides the ability to access any of the four active programs •Sequence control gives the opera-tor the ability to adjust all of the welding parameters: preflow, run-in, weld time, crater, burnback and postflow •Locks and limits for restricting or limiting operator adjustments, such as voltage and wire feed speed parameters •Four weld program memories allow operators to recall up to four previously used processes and their weld settings

74S & 74D•Standard, simple feeders for most heavy-industrial applications, with the 74D providing increased accuracy and control of the most common weld parameters •Digital meters (74D models only) ensure accuracy when presetting and reading actual voltage, amperage and wire feed speed •Remote voltage control (74D models only) allows you to set both voltage and wire feed speed at the feeder, saving time and increasing weld quality because optimal weld parameters are easy to set

20 SERIES INDUSTRIAL & 70 SERIES HEAVY-INDUSTRIAL BENCH FEEDERS ACCESSORIESPart No. 142382, Feeder Cart.Part No. 047141, Spool Adapter.Part No. 146236, Turntable Assembly.Part No. 058435, Hanging Bail.20 & 70 SERIES PUSH-PULL GUNS

Model No. Welding Current Rating Wire Feed Speed

Wire Type andDiameter Capacity

Dimensions Net WeightCable Length

15 ft. (4.6 m)Part No.

25 ft. (7.6 m)Part No.

35 ft. (10.6 m)Part No.

XR-Aluma-Pro Plus (Air-cooled) 300000001 300001001 - 300 A at 100% duty cycle 2.5 lb. (1.1 kg)XR-Aluma-Pro Plus (Water-cooled) 300003001 300004001 - 400 A at 100% duty cycle 2.9 lb. (1.3 kg)

XR-Pistol Plus (Air-cooled) 300753 300754 300755 200 A at 100% duty cycle 2.2 lb. (1 kg)XR-Pistol Plus (Water-cooled) - 300757 - 400 A at 100% duty cycle 2.4 lb. (1.1 kg)

70–900 IPM(1.8–23 m/min.)

Aluminum.030 –.052”

(0.8–1.3 mm)

5”H x 2.5”W x 17”L (127 mm x 64 mm x

432 mm)7.375”H x 1.875”W x 10.625”L (187 mm x 48 mm x 270 mm)

Part No. 108008, Wire Reel Assembly.Part No. 057607, Spool Covers For 20 and 70 Series single-wire models and left side of dual-wire models.Part No. 090389, Spool Covers For right side of dual-wire models.


Use with CV, DC power sources.

Model No. InputPower

Wire DiameterCapacity

Maximum SpoolSize Capacity

Single-Wire Feeders Dual-Wire Feeders Wire Feed Speed Net Weight with FeederStock No. Stock No.Part No. Part No.

8-ft. (2.4 m) Boom SS-74S8 951522 DS-74S8 951531 SS-74D8 951525 DS-74D8 951534 SS-74DX8 951528 DS-74DX8 951537 SS-74MPa Plus-8 951437 DS-74MPa Plus-8 95144012-ft. (3.7 m) Boom SS-74S12 951523 DS-74S12 951532 SS-74D12 951526 DS-74D12 951535 SS-74DX12 951529 DS-74DX12 951538 SS-74MPa Plus-12 951438 DS-74MPa Plus-12 95144116-ft. (4.9 m) Boom SS-74S16 951524 DS-74S16 951533 SS-74D16 951527 DS-74D16 951536 SS-74DX16 951530 DS-74DX16 951539 SS-74MPa Plus-16 951439 DS-74MPa Plus-16 951442

24 VAC, 10 A,50/60 Hz

.023 –5/64 in.(0.6 – 2.0 mm)

60-lb. (27 kg) coil with optional wire

reel assembly#108008

Single-Wire Feeder: 110 lb. (50 kg)

Dual-Wire Feeder: 134 lb. (61 kg)





50–780 IPM(1.3 –19.8 m/min.)

Consult factory for low- and high-speed motor options on non-MPa

feeders

70 SERIES Swingarc™•Swingarc boom-mounted wire feeders bring an extra dimension of flexibility and efficiency to weld stations dealing with large weldments, or wherever operator mobility is required •Single- and dual-wire models with 8, 12 or 16 ft. booms are sized to accommodate a variety of weld cell layouts (16, 24 or 32 ft. diameter work area) •Counterbalance design makes it easy to position boom and 360° rotation and 60° lift angle maximizes work area •In-boom cable routing organizes hoses and cables for a cleaner work environment •Each feeder includes a 15 ft. Bernard Q400 MIG gun (two with dual-wire models), plus a 10 ft. 14-pin interconnecting cord to connect power source to boom control •MPa Plus Swingarcs. Optimized for the Invision™ MPa and XMT® MPa power sources and available with single or dual-wire feeders and three boom lengths.Processes:•MIG (GMAW) •Flux-Cored (FCAW)Comes Complete with: Models include Bernard™Q400 MIG gun, .035/.045” drive rolls and Centerfire™contact tips.

Part No. 183997, Swingpak™ Base.Part No. 149838, 4 ft. Pipe Post with 18” Base.Part No. 149839, 6 ft. Pipe Post with 18” Base.

MILLER®

Wire FeedersMLR/2777/2784

70 SERIES REMOTE CONFIGURATIONS•Remote wire feeder control box and wire drive assembly for non-Miller boom applications.Processes:•MIG (GMAW) •Flux-Cored (FCAW)

Motor Control Cable (11 conductor)*•For push-only gun configurations. Part No. 254935010, 10 ft. (3 m)Part No. 254935025, 25 ft. (7.6 m)

MPa Plus Motor Control Cable (14 conductor)*•For MPa Plus configurations only — single-wire or left side of dual-wire.Part No. 254864010, 10 ft. (3 m)Part No. 254864025, 25 ft. (7.6 m)

Part No. 195369, Feeder Base - For use with spooled wire.

Use with CV, DC power sources.

Single-wire Control BoxPart No. 300881, S-74S.Part No. 300882, S-74D.Part No. 300883, S-74DX.Part No. 300738, S-74 MPa Plus.

Wire Drive Motor Assembly•MPa Plus drive can be used with push-only guns, or XR-AlumaPro™ Plus and Pistol Plus push-pull guns.Part No. 300904, Standard left-hand drive.Part No. 300740, MPa Plus left-hand drive.

Motor Control CableStandard: 11 conductorMPa Plus: 14 conductor

Push-only wire drive motor assemblyPart No. 300741001, Standard right-hand drive.Part No. 300741, MPa Plus right-hand drive.

Wire drive motor assembly•MPa Plus drive can be used with push-only guns, or XR-AlumaPro™ Plus and Pistol Plus push-pull guns.Part No. 300904, Standard left-hand drive.Part No. 300740, MPa Plus left-hand drive.

Dual-wire control boxPart No. 300886, D-74S.Part No. 300887, D-74D.Part No. 300888, D-74DX.Part No. 300739, D-74 MPa Plus.

Motor Control Cable11 conductor

Motor Control CableStandard: 11 conductorMPa Plus: 14 conductor

Single/Dual Spool Carrier (Pipe Post not included). Designed to put spool hub assembly at 36” from base for easier wire spool installation.Part No. 300353, For 4-ft. post.Part No. 300352, For 6-ft. post.


SUGGESTED POWER SOURCES•CP-302 (22A only) •Deltaweld® Series •Invision™ MPa Series •Dimension™ Series •XMT® Series (except VS model)

Gun NOT included.Must be ordered separately.




MILLER®

SMAW/Stick WeldersMLR/2777/2784

Thunderbolt® XL 225 AC & 225 AC/150 DC•Economical Stick machines with precise, dependable control •Accu-Set™ amperage indicator provides precise heat control •Unit allows higher duty cycle when amperage decreases •Infinite current control allows the operator to adjust output by as little as one-amp increments •Output selector switch on AC/DC units allows you to quickly select AC, DCEP or DCEN without adjust-ing the output leads •Certified by Canadian Standards Association to both the Canadian and U.S. StandardsProcesses:•Stick (SMAW)Comes Complete with: 15 ft. (4.5 m) No. 4 electrode cable with heavy-duty electrode holder, 10 ft. (3 m) work cable with clamp, and Power cord with plugPart No. 903641, Thunderbolt XL 225 AC (CSA). 230 V, 50/60 Hz.Part No. 903642, Thunderbolt XL 225 AC/150 DC (CSA). 230 V, 50/60 Hz.Part No. 043927, Thunderbolt XL Running Gear.

Welding Mode

WeldingAmp Range

Part No. Rated Output at100% Duty Cycle

Amps Input atRated Output

Max. Open-Circuit Voltage Dimensions Net WeightRated Output at 20% Duty Cycle, 60 Hz

(15% Duty Cycle, 50 Hz)903641 AC 30–235 225 A at 25 VAC 100 A 47.5 80 85 lb. (39 kg)903642 AC 30–235 225 A at 25 V 100 A 47.5 80 104 lb. (47 kg) DC 30–160 150 A at 25 V 65 A

18.75”H x 12.75”W x 17.5”D (476 mm x 323

mm x 445 mm)

225 AC model is AC only.

Dialarc® 250 AC/DC•Superb performance and versatility in a flexible Stick machine •Single-dial infinite current control simplifies and allows precise weld output adjustment •High and low ranges for both AC and DC allow greater control of weld performance •Forced-draft cooling fan ensures cooler running product, extending life of power source •Superior 6010 and 7018 Stick welding performance offers wide range of electrode versatility •High output and duty cycle allow unit to handle nearly all Stick welding needs •Optional remote weld output control provides current control without going back to power source saving time and effortProcesses:•Stick (SMAW) • Air Carbon Arc Cutting and Gouging (CAC-A) (3/16” carbons)Part No. 907017, Dialarc without Power Factor Correction. 200(208)/230/460 V.Part No. 907015, Dialarc with Power Factor Correction. 208/230/460/575 V.

Maxstar® 150 S•Provides maximum portability and performance in a compact Stick package. Packs dependability and performance all in one machine. •Multi-voltage plug (MVP™) allows connection to 120 or 240-volt receptacles without tools. Choose the plug that fits the receptacle and connect it to the power cord. •Portable with adjustable shoulder strap. Easy to transport at only 13.2 pounds. •Allows for any input voltage hook-up (120–240 V) with no manual linking, providing convenience in any job setting •Adaptive Hot Start™ for Stick arc starts reduces electrode sticking •Single amperage range allows operator to accurately set amperage on both 120 or 240-volt primary powerProcesses:•Stick (SMAW)Comes Complete with: 10 ft. power cord with MVP plugs for 120 V and 240 V, 13 ft. (4 m) electrode cable with holder and 25 mm Dinse connector, and 10 ft. (3 m) work cable with clamp and 25 mm Dinse connectorPart No. 907134, 115-230 VAC, 50/60 Hz.Part No. 907134012, 115-230, 50/60 Hz with X-CASE.

Welding Mode

WeldingAmp Range

WeldingAmp Range

KVA atDuty Cycle

Max. Open-Circuit VoltageKWAmps Input at Rated

Output, 50/60 Hz

200 V 208 V 230 V 460 V 575 V KWKVAModel No.

Input Power

Max. Open-Circuit Voltage

Amps Input at Rated Output, 60 HzDimensions Net WeightRated Output at

30% Duty Cycle

Rated Output

Dialarc w/o Power AC 35–300 225 A at 29 VAC 84 — 73 36 29 16.8 9.8 70 360 lb. (163 kg)Factor Correction DC 35–265 225 A at 29 VAC 92 — 80 40 32 18.6 11.8 79Dialarc w Power AC 35–300 225 A at 29 VAC — 60 55 27 22 12.5 9.9 70 365 lb. (166 kg)Factor Correction DC 35–265 225 A at 29 VAC — 66 60 30 24 13.7 10.8 79

115 VAC 20–100 100 A at 24 VDC, 35% duty cycle 26.4 3.0 3.0 90 (12 –16 VDC*) 13.2 lb. (6.0 kg)230 VAC 20–150 150 A at 26 VDC, 30% duty cycle 21.6 4.9 4.7

24.25”H x 19”W x 28”D (616 mm x 483 mm x

711 mm)

9”H x 5.5”W x 13.25”D (229 mm x 140 mm x

337 mm)


*Sense voltage for Stick.

Maxstar® 200 STR•Maximum flexibility with automatic connection to any input power while maintaining the best DC Stick/TIG welding performance in its product class •Allows for any input voltage hook-up (120–480 V) with no manual linking, providing convenience in any job setting •Lift-Arc™ provides TIG arc starting without the use of high frequency •Low OCV Stick model reduces open-circuit voltage to 9–14 VDC. This eliminates the need for add-on voltage reducers. •Excellent for thin/medium wall pipe welds •Remote amperage control •Adaptive Hot Start™ for Stick arc starts •Portable with adjustable shoulder strapProcesses:•Stick (SMAW) • TIG (GTAW)Comes Complete with: 8 ft. (2.4 m) power cord (no plug) and Two 50-mm Dinse connectorsPart No. 907036, Low OCV.Part No. 907036001, Normal OCV.

Input Power

WeldingAmp Range

Welding Process

Max. Open-Circuit Voltage Dimensions Net WeightRated Output

115 V 230 V 400 V 460 V KVA KWAmps Input at Rated Load Output, 50/60 Hz

Stick 3-phase 1–200 150 A at 26 V, 60% duty cycle — 13.1 7.4 6.4 5.2 5.0 80 VDC 32 lb. (14.5 kg) 1-phase 1–200 150 A at 26 V, 60% duty cycle — 21.7 — — 5.0 5.0 (9 –14 VDC*) 1–90 125 A at 25 V, 50% duty cycle 34.1 — — — 4.0 3.8TIG 3-phase 1–200 175 A at 17 V, 60% duty cycle — 10.5 6.0 5.2 4.2 4.0 80 VDC 1-phase 1–200 175 A at 17 V, 60% duty cycle — 17.4 — — 4.0 4.0 (9 –14 VDC*) 1– 150 (120 V) 150 A at 16 V, 70% duty cycle 29.7 14.1 — — 3.4 3.4

13.5"H x 7.5"W x 17.5"D (343 mm x 191 mm x

445 mm)

*Sense voltage for Stick and Lift-Arc TIG.

Part No. WP-17V-12-R, 12.5-ft. (3.8 m) Weldcraft™ A-150V TIG torch.Part No. 195321, Protective Cover.

Part No. 300184, Protective X-CASE™.

Part No. 242199020, RFC-23A Remote Foot Control. Part No. 242210020, RHC-3 Remote Hand Control. Part No. 041580, No. 19 Running Gear.


MILLER®

SMAW/Stick WeldersMLR/2777/2784

Gold Star® SERIES•Rugged, reliable performance and superior arc characteristics. •Hot Start™ and built-in arc control •Enclosed circuit board •Thermal overload protection with light •Fan-On-Demand™ •15 A, 115 VAC duplex receptacle •Power efficient •Remote control capability •Optional digital volt and amp metersProcesses:• Stick (SMAW) •TIG (GTAW) •Air Carbon Arc Cutting and Gouging (CAC-A) (carbons —452: 5/16”, 652: 3/8”) •Flux-Cored (FCAW) •MIG Spray Transfer (GMAW) with voltage-sensing feederPart No. 903374, Gold Star 452. 200(208)/230/460 V.Part No. 903400, Gold Star 452. 230/460/575 V.Part No. 903402, Gold Star 652. 230/460/575 V.

CST™ 280•Durable power source designed for the construction industry. Ideal for Stick electrodes up to 3/16” and TIG welding of pipe and plate. •Easy voltage changeover between voltage ranges through a two-position manual switch located on the rear panel. Simpli-fies voltage change in racks. •Process selector knob automatically sets proper DIG setting on E6010 and E7018 stick electrodes for better performance •Lift-Arc™ for TIG arc starts without the use of high frequency •Fan-On-Demand™ power source cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled though the machine •Remote amperage control through the 14-pin connectorProcesses:•Stick (SMAW) •TIG (GTAW)Comes Complete with: One set of male connectors (Dinse-style model only)Part No. 907244, Dinse. 220-230/460-575 V.Part No. 907244011, Tweco®. 220-230/460-575 V.Part No. 907251, Dinse. 208-230/400-460 V.Part No. 907251011, Tweco®. 208-230/400-460 V.

CST™ 280 Racks•Rugged enclosure provides simple means for protecting and transporting multiple welding power sources for construction, main-tenance/repair and shipbuilding applications •Light weight and small footprint for easy transportation •The low weight enables the use of elevators to move the rack •All controls including power switch are located on front of machine for easy access •Top cover protects machines from falling debris •Lift eye simplifies crane or overhead lifting device transport •Lift truck fork pockets •One main disconnect box with branched fusing for each machine •Common output ground connection (for same polarity use only) •Optional rack running gear available for moving the rackProcesses:• Stick (SMAW) • TIG (GTAW) • Air Carbon Arc Cutting and Gouging (CAC-A) (5/16”. carbons with paralleled CST 280s)Part No. 907247, Tweco® 4-Pack Rack.Part No. 907245, Dinse 4-Pack Rack.Part No. 907365, Tweco® 8-Pack Rack. Part No. 195051, Empty Rack.Part No. 195114, 4-Pack Rack Running Gear.Part No. 195436, 8-Pack Rack Running Gear.

Amperage Rangein CC ModeModel No. Max. Open-

Circuit VoltageDimensions

(Includes lift eye and strain relief) Net WeightRated Output200 V 230 V 460 V 575 V KVA KW


Gold Star 452 20–590 450 A at 38 VDC, 60% duty cycle 102 89 45 36 35.5 23.3 72 VDC 404 lb. (183 kg)Gold Star 652 50–850 650 A at 44 VDC, 60% duty cycle — 124 62 50 49.4 36 72 VDC 505 lb. (229 kg)

30”H x 23”W x 38”D (762 mm x 585 mm x 966 mm)

Input Power

WeldingAmp RangeVoltage Range Max. Open-

Circuit Voltage Dimensions Net WeightRated Output208 V 220 V 230 V 400 V 440 V 460 V 575 V KVA KW

Amps Input at Rated Load Output, 50/60 Hz

220-230/460-575V 3-phase 5–280 280 A at 31.2 V, 35% duty cycle — 35.0 34.2 — — 17.8 14.7 14.6 10.2 77 VDC 41 lb. 200 A at 28 V, 100% duty cycle — 23.3 22.5 — — 11.7 9.7 9.6 6.4 (18.6 kg) 1-phase 5–200 200 A at 28 V, 50% duty cycle — 43.9 43.0 — — — — 10.1 6.6 150 A at 26 V, 100% duty cycle — 32.7 32.0 — — — — 7.3 4.6208-230/400-460V 3-phase 5–280 280 A at 31.2 V, 35% duty cycle 36.0 — 34.0 19.8 18.0 17.5 — 14.0 10.2 67 VDC 200 A at 28 V, 100% duty cycle 23.5 — 22.8 13.5 12.0 12.7 — 10.2 6.9 1-phase 5–200 200 A at 28 V, 50% duty cycle 43.9 — 43.0 — — — — 9.9 6.5 150 A at 26 V, 100% duty cycle 35.0 — 32.9 — — — — 7.6 4.8

13.5”H x 7.5”W x 18”D

(343 mmx 191 mm x 457 mm)

RackCapacity Input Power to Rack*Model No.

220 V 230 V 400 V 440 V 460 V 575 V KVA KW Dimensions Net Weight

4-Pack Rack 4 units 3 -phase, 220-230/460-575 V, 50/60 Hz. 137 134 79 72 70 57 58.4 40.8 355 lb. (161 kg)

8-Pack Rack 8 units 274 268 158 145 140 114 116.8 81.6 640 lb. (290 kg)

Empty Rack 4 units — — — — — — — — Same as 4-pack rack 166 lb. (75 kg)Note: CST 280s are factory-linked for 460-575 V. Dinse units include one set of male connectors; Tweco units do not. See above for information on CST 280.

Amps Input at Rated Output, 50/60 Hz

50.75”H (1289 mm)4-pack: 25.5”W (648 mm)8-pack: 46”W (1168 mm)

26.5”D (673 mm)


MILLER®

GTAW/TIG WeldersMLR/2777/2784

Diversion™ 165 & 180 AC/DC TIG•Professional-grade arc in a package designed specifically for personal users. Contains all of the features you need—simplic-ity combined with superior performance and value. •Easy-to-understand operator interface. Power up, select material type, set material thickness range and start welding! •Inverter-based, AC/DC power source provides a more consistent welding arc while using less power •HF arc starting provides non-contact arc starting that eliminates tungsten or material contamination •Fan-On-Demand™ cooling system only operates when needed to reduce noise and maintenance •Portable. Easy to transport at 50 pounds. •Auto-postflow protects the weld end zone and electrode by optimizing post flow time based on welding amperage •Advanced squarewave AC provides a fast freezing weld puddle and deeper penetration •Weldcraft™ A-150 torch with Diamond Grip™ provides more comfortable grip and reduces operator fatigue •Diversion 180 includes multi-voltage plug (MVP™) which allows connection to 120 or 240-volt receptacles without tools. Choose the plug that fits the receptacle and connect it to the cord.Processes:•TIG (GTAW)Comes Complete with: Power cord with 50 A, 240 V plug (165 model) or MVP plugs for 120 V and 240 V (180 model), 12.5 ft. (3.8 m) Weldcraft™ A-150TIG torch, 12 ft. (3.7 m) work cable with clamp, RFCS-RJ45 remote foot control, and Flow gauge regulator with hosePart No. 907626, Diversion 165.Part No. 907627, Diversion 180.Part No. 301239, Running Gear/Cylinder Rack. Part No. 300579, Protective Cover.Part No. 300688, RJ45 to 14-Pin Adapter Cord.

Syncrowave® 210 SERIES AC/DC TIG & STICK•Continuing the tradition of innovation through advanced inverter technology for light-industrial and personal users •Allows for any input voltage hook-up (120–240 V) with no manual linking, providing convenience in any job setting •Multi-voltage plug (MVP™) allows connection to 120- or 240-volt receptacles without tools. Choose the plug that fits the receptacle and connect it to the cord. •Update and expand. Front panel memory card data port provides the ability to easily update software and expand product features. •Low power draw. Inverter-based power source provides full welding output from 240 volts while drawing less than 30 amps •Pro-Set™ (TIG/Stick) eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of preset controls. •AC balance (TIG) control provides adjustable oxide removal which is essential for creating the highest quality aluminum welds •Pulse (TIG). Pulsing can increase puddle agitation, arc stability and travel speeds while reducing heat input and distortion. Expandable feature. •DIG (Stick) control allows the arc characteristics to be changed for specific applications and electrodes. Lower the DIG setting for smooth running electrodes like E7018 and increase the DIG setting for stiffer, more penetrating electrodes like E6010. •Auto-Set™ (MIG) automatically sets your welder to the proper parameters. Simply set the wire size, material thickness, and shielding gas, and you’re ready to weld. (TIG/MIG complete package only.)Processes:• AC/DC TIG (GTAW) • DC Stick (SMAW) • Pulsed TIG (GTAW-P) • MIG (GMAW)* • Flux-Cored (FCAW)**TIG/MIG Complete package only.Comes Complete with: 10 ft. power cord with MVP plugs for 120 V and 240 V, 12.5 ft. (3.8 m) Weldcraft™ A-150 TIG torch, 12-ft. (3.7 m) work cable with clamp and Dinse connector, Electrode holder with Dinse connector, RFCS-14 remote foot control, Flow gauge regulator with hose, and Factory-installed running gear with EZ-Change™ low cylinder rackTIG/MIG Complete Package Comes with Above Plus:•Spoolmate™ 100 spool gun, 4-14 pin connector, Flow-thru Dinse connector, and Memory cardPart No. 907596, Runner.Part No. 951616, Runner TIG/MIG Complete.Part No. WP-17-25-R, 25-ft. (7.6 m) Weldcraft™ A-150 TIG Torch. Part No. 195142, Protective Cover.Part No. 151086, RCC-14 Remote Control.

Steel Welding CapabilityMin - 0.025” (0.6 mm)Max - 3/16” (4.8 mm)

Aluminum Welding CapabilityMin - 0.030” (0.75 mm)Max - 3/16” (4.8 mm)

InputPower KVA Dimensions Net WeightKWWelding Amp.

RangeAmps Input atRated Output

Max. Open-Circuit VoltageRated OutputModel

Diversion 165 230 VAC 10 –165 150 A at 16 V, 20% duty cycle 23 (.20*) 5.3 (.04*) 3.7 (.02*) 80 VDC 50 lb. (23 kg) 165 A at 16.6 V, 15% duty cycle 25.5 (.20*) 5.9 (.04*) 4.2 (.02*)Diversion 180 115 VAC 10 –125 125 A at 15 V, 35% duty cycle 26.5 (.88*) 3.1 (.1*) 3.0 (.03*) 230 VAC 10 –180 150 A at 16 V, 20% duty cycle 16 (.44*) 3.7 (.1*) 3.6 (.03*) 180 A at 17.2 V, 10% duty cycle 20.5 (.44*) 4.7 (.1*) 4.6 (.03*)

17”H x 9.875”W x 23.875”D (433 mm x 251 mm x 608 mm)

*While idling.

WeldingAmp Range

WeldingProcess

Amps Input at Rated Output

Max. Open-Circuit Voltage

Input Power Rated Output (R.M.S.) Dimensions Net Weight

115 V DC TIG 5–125 A 95 A at 13.8 V, 60% duty cycle 17.4 (.58*) 47 VDC AC TIG 5–125 A 90 A at 13.6 V, 60% duty cycle 12.4 (.58*) DC Stick 20– 90 A 70 A at 22.8 V, 60% duty cycle 20.5 (.58*)230 V DC TIG 5– 210 A 125 A at 15 V, 60% duty cycle 11.9 (.35*) AC TIG 5– 210 A 114 A at 14.6 V, 60% duty cycle 8.62 (.35*) DC Stick 20–150 A 90 A at 23.6 V, 60% duty cycle 11.9 (.35*)

31.5”H x 18.5”W x 43”D (800 mm x 470 mm x

1,092 mm)

Runner package:133.5 lb. (61 kg)Runner TIG/MIG

Complete package:139.5 lb. (63 kg)

*While idling.

Part No. 300429, Wireless Remote Foot Control.Part No. 301128, DC pulse Memory Card Expansion.Part No. 301127, AC frequency Memory Card Expansion.Part No. AK-150MFC, TIG Torch Accessory Kit. Allows A-150 torch customization. Converts into 28 different torch styles while using existing cable. Includes collets, collet bodies, nozzles, torch heads, handle and more.


Aluminum Welding CapabilityMin - 0.020” (0.5 mm)Max - 1/4” (6.4 mm)



MILLER®


Maxstar® 150 STL & STH DC TIG & STICK• Maximum portability and performance provided in one compact TIG/Stick package •Two models available: STL: DC TIG/Stick with Lift-Arc™ starting without the use of high frequency; STH: DC TIG/Stick with high frequency and Lift-Arc™ starting, plus built-in pulsing with a selection of four fixed-pulse frequencies •Allows for any input voltage hook-up (120–240 V) with no manual linking, providing convenience in any job setting •Multi-voltage plug (MVP™) allows connection to 120 or 240-volt receptacles without tools. Choose the plug that fits the receptacle and connect it to the power cord. •Portable with adjustable shoulder strap •Easy to transport at 13.7 pounds •Built-in gas solenoid eliminates the need for bulky torch with a gas valveProcesses:•TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) w/STH modelComes Complete with: 10-ft. power cord with MVP plugs for 120 V and 240 V, 13 ft. (4 m) electrode cable with holder and 25-mm Dinse connector, and 10 ft. (3 m) work cable with clamp and 25-mm Dinse connectorTIG/Stick Package Includes Above Plus: 12.5-ft. (3.8 m) Weldcraft™ A-150 TIG torch, Protective X-CASE™, Flow gauge regulator with hose, Remote fingertip control (only in packages #907135017 and #907136017), and AK2C accessory kitPart No. 907135, Maxstar 150 STL Machine only.Part No. 907135016, Maxstar 150 STL TIG/Stick package.Part No. 907135017, Maxstar 150 STL TIG/Stick package with remote fingertip control.Part No. 907136, Maxstar 150 STH Machine only.Part No. 907136017, Maxstar 150 STH TIG/Stick package with remote fingertip control.

Syncrowave® 250 DX & 350 LX AC/DC TIG & STICK•The world’s first conventional squarewave TIG power source with decades of proven performance •Squarewave output with AC balance control features adjustable cleaning action while increasing arc stability on various aluminum alloys, and helps eliminate tungsten spitting and arc rectification •120-volt auxiliary power receptacle for cooling system or small tools •Syncro Start™ technology for customized arc starts. Allows more precise arc starts and fine-tuning based on tungsten diameter and material thickness. •HF arc starting provides non-contact arc starting that eliminates tungsten or material contamination •Dual digital meters allow for quick and easy viewing of actual and preset values of amperage and voltage •Adjustable postflow of 0 – 50 seconds protects the electrode and area near the termination of the weld •Coolmate™ 3X cooler (shown in Complete package). Three-gallon cooling system features a flow indicator to visually indicate system is working and an external filter to stop objects from entering the water-cooled torch cable. •Last procedure recall automatically recalls the last procedure setup when switching polarity •Line voltage compensation keeps power source constant regardless of fluctuations in input power (±10%) •Lift-Arc™ provides DC arc starting without the use of high frequencyProcesses:TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) (optional on 250 DX) • Air Carbon Arc (CAC-A)Comes Complete with*: •Two 50-mm Dinse connectors*Power cord NOT included.Complete Packages Come with*:No. 37 running gear, Coolmate™ 3X cooler, Coolant (four gallons), 25 ft. (7.6 m) water-cooled torch with Dinse connector(Syncrowave 250: Weldcraft™ W-250) (Syncrowave 350: Weldcraft™ W-375), 15 ft. (4.6 m) work cable with clamp and Dinse connector, RFCS-14 remote foot control, Flowmeter regulator with hose, Torch accessory kit with tungsten, and Cable cover*Power cord NOT included.Part No. 907195, Syncrowave 250 DX Machine only.Part No. 951118, Syncrowave 250 DX Complete.Part No. 907199, Syncrowave 350 LX Machine only.Part No. 951623, Syncrowave 350 LX Complete.

Input Power

WeldingAmp Range

Welding Process

Max. Open-Circuit Voltage Dimensions Net WeightRated Output Amps Input at Rated

Output, 50/60 HzKVA at

Duty Cycle KW

TIG 115 VAC 5–150 150 A at 16 VDC, 30% duty cycle 28.0 3.4 3.1 13.7 lb. (6.2 kg) 230 VAC 5–150 150 A at 16 VDC, 30% duty cycle 14.2 3.2 3.1Stick 115 VAC 20–100 100 A at 24 VDC, 35% duty cycle 26.4 3.0 3.0 230 VAC 20–150 150 A at 26 VDC, 30% duty cycle 21.6 4.9 4.7

9”H x 5.5”W x 13.25”D(229 mm x 140 mm x

337mm)

90 VDC(12 –16 VDC*)

*Sense voltage for Stick and Lift-Arc TIG.

Mild Steel Welding CapabilityModel 250: Min - 0.012” (0.3 mm) Max - 1/2” (12.7 mm)Model 350: Min - 0.012” (0.3 mm) Max - 5/8” (15.9 mm)

Aluminum Welding CapabilityModel 250: Min - 0.015” (0.4 mm) Max - 3/8” (9.5 mm)Model 350: Min - 0.015” (0.4 mm) Max - 1/2” (12.7 mm)

Input Power WeldingAmp RangeModel No. Max. Open-

Circuit Voltage Dimensions* Net Weight**Rated Output230 V 460 V 575 V KVA KW

Amps Input at Rated Output, 50/60 Hz

Syncrowave 3–310 200 A at 28 VAC, 60% duty cycle 77 38 31 17.6 8.6 378 lb. (172 kg)250 DX 250 A at 30 VAC, 40% duty cycle 96 48 38 21.98 11.76Syncrowave 3–400 300 A at 32 VAC, 60% duty cycle 110 55 42 25 10.6 496 lb. (225 kg)350 LX 350 A at 34 VAC, 40% duty cycle 128 65 50 29.5 13.7

36.25”H x 22.5”W x 25”D (921 mm x 572 mm x

635 mm)

80 VDC230/460/575 V, 50/60 Hz

*Add 12.75” to height with Complete package. **Add 139 pounds with Complete package.

Part No. 300184, Protective X-CASE™.Part No. 195184, RCCS-6M Remote Fingertip Control.Part No. 195183, RFCS-6M Remote Foot Control.

Part No. 300429, Wireless Remote Foot Control.Part No. 300548, Pulser Module (250 DX ONLY, standard on 350 LX). For welding thin materials. Provides a heating and cooling effect of the weld puddle to reduce heat input and control distortion of the material. Provides 0.25 to 10 pulses per second. Part No. 300547, Sequencer Module (250 DX/350 LX). Provides a starting current higher or lower than the welding current. Provides final slope and final current for trailing the weld. Provides a spot timer for TIG spot application



Maxstar® & Dynasty® 200 SERIES DC (Maxstar) & AC/DC (Dynasty) TIG & STICK•Multiple models available. SD model provides basic TIG and Stick functions. DX model adds pulser and sequencer functions. LX model (Maxstar only) adds pulser and sequencer functions and an automation connection. •Allows for any input voltage hook-up (120–480 V) with no manual linking, providing convenience in any job setting •Blue Lightning™ high-frequency arc starter for more consistent non-contact starts and greater reliability compared to traditional HF arc starters •Lift-Arc™ provides AC or DC arc starting without the use of high frequency •Hot Start™ adaptive control provides positive arc starts •Auto-postflow calculates the length of postflow time based on the amperage setting. Eliminates need to independently set postflow time. •Portable with adjust-able shoulder strap. Easy to transport at 37 or 45 pounds.Dynasty welders add AC TIG capabilities and the following AC features: •Waveforms for advanced squarewave, soft squarewave, sine wave and triangular wave •Balance control to provide adjustable oxide removal enabling high-quality aluminum TIG welds •Frequency to control arc cone width and improve directional control of arcProcesses:• TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) except SD model • Air Carbon Arc (CAC-A)Comes Complete with: 8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors, One air-cooled TIG torch connector(except Maxstar LX), and Setup DVDContractor Packages Come with: 8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors, One air-cooled TIG torch connector, Setup DVD, and Contractor kit with remote control (fingertip or foot)Complete Packages Come with: 8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors, One air-cooled TIG torch connector, Setup DVD, 2-wheel trolley cart, Coolmate™ 1, Coolant (1 one-gallon bottle), Remote control (fingertip, foot or wireless foot), and Weldcraft™ W-250 (WP-20) water-cooled torch kit

Maxstar 200Part No. 903701, SD Machine only.Part No. 903701011, DX Machine only.Part No. 951173, DX Contractor w/fingertip.Part No. 951172, DX Contractor w/foot.Part No. 951138, DX Complete w/fingertip.Part No. 951137, DX Complete w/foot.Part No. 951396, DX Complete w/wireless foot.Part No. 903701012, LX Machine only.

Dynasty 200Part No. 907099, SD Machine onlyPart No. 907099011, DX Machine onlyPart No. 951175, DX Contractor w/fingertipPart No. 951174, DX Contractor w/footPart No. 951140, DX Complete w/fingertipPart No. 951139, DX Complete w/footPart No. 951397, DX Complete w/wireless foot

Welding Process

Input Power

Welding Amp Range Rated Output

115 VAmps Input at Rated Load Output, 50/60 Hz

230 V 400 V 460 V KVA KWMax. Open-

Circuit VoltageMachine OnlyDimensions

Machine OnlyNet Weight

TIG 3-phase 1–200 175 A at 17 V, 60% duty cycle — 11 6 5 4.2 4.0 1-phase 1–200 175 A at 17 V, 60% duty cycle — 17 — — 4.0 4.0 1-150 (120V) 150 A at 16 V, 70% duty cycle 30 14 — — 3.4 3.4Stick 3-phase 1–200 150 A at 26 V, 60% duty cycle — 13 7 6 5.2 5.0 1-phase 1–200 150 A at 26 V, 60% duty cycle — 22 — — 5.0 5.0 1–90 125 A at 25 V, 50% duty cycle 34 — — — 4.0 3.8TIG 3-phase 1–200 150 A at 16 V, 60% duty cycle — 10 6 5 3.8 3.6 1-phase 1–200 150 A at 16 V, 60% duty cycle — 16 — 8 3.6 3.6 1–150 140 A at 16 V, 40% duty cycle 31 — — — 3.6 3.5Stick 3-phase 1–200 130 A at 25 V, 60% duty cycle — 13 8 6 4.8 4.6 1-phase 1–200 130 A at 25 V, 60% duty cycle — 20 — 10 4.7 4.7 1–105 100 A at 24 V, 60% duty cycle 31.3 — — — 3.6 3.6

MILLER®


13.5”H x 7.5”W x 17.5”D(343 mm x 191 mm x

445 mm)

80 VDC(9–14*)

37 lb. (16.8 kg)

13.5”H x 7.5”W x 21.5”D(343 mm x 191 mm x

546 mm)

80 VDC(5–10 VDC*)

45 lb. (20.5 kg)

AC

/DC

DC

Note: Duty cycle is limited on 120 V power. Coolmate 1 must be plugged into a 120 V source (wall).*Sense voltage for Low OCV Stick and Lift-Arc™ TIG.

Part No. 300480, 2-Wheel Trolley Cart.Part No. 300360, Coolmate™ 1.Part No. 043810, Coolant.Part No. 195055, Contractor Kits with RCCS-14 finger control.Part No. 195054, Contractor Kits with RFCS-14 HD foot control. Part No. 300185, Weldcraft™ W-250 (WP-20) Water-Cooled Torch Kit.Part No. 043688, RCCS-14 fingertip control.Part No. 194744, RFCS-14 HD foot control.Part No. 300429, Wireless foot control.


Aluminum Welding Capability(Dynasty Only)Min - 0.020” (0.5 mm)Max - 1/4” (6.4 mm)

Maxs

tar 2

00Dy

nast

y 200


MILLER®


Maxstar® & Dynasty® 280 Series DC (Maxstar) & AC/DC (Dynasty) TIG & STICK•Base and DX models available. Base model provides essential TIG and Stick functions. DX model adds extended ranges to sequencer, full trigger options, and full preflow and pulser functions. •Allows for any input voltage hook-up (208–575 V) with no manual linking, providing convenience in any job setting •Blue Lightning™ high-frequency arc starter for more consistent non-contact starts and greater reliability compared to traditional HF arc starters •Lift-Arc™ provides AC or DC arc starting without the use of high frequency •Hot Start™ adaptive control provides positive arc starts •Auto-postflow calculates the length of postflow time based on the amperage setting. Eliminates need to independently set postflow time. •Pro-Set™ provides the speed, convenience and confidence of preset parameters for balance, frequency, pulse and DIG •Sleep timer conserves energy by powering down system if left idle for a user-adjustable amount of time •Memory card port for easy software updates and expansions •Optional Cooler Power Supply (CPS) is an integrated 120-volt dedicated-use receptacle to power the Coolmate™ 1.3. The power switch on the power source also activates the receptacle to help prevent torch failure.Dynasty welders add AC TIG capabilities and the following AC features (limited on base model): •Waveforms for advanced squarewave, soft squarewave, sine wave and triangular wave •Balance control to provide adjustable oxide removal enabling high-quality aluminum TIG welds •Frequency to control arc cone width and improve directional control of arcProcesses:•TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) • Air Carbon Arc (CAC-A)Comes Complete with: 8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors, and Quick reference guide (Dynasty 280 model only)Complete Packages Come with: 8 ft. (2.4 m) power cord (no plug), Quick reference guide (Dynasty 280 model only), Small Runner™ cart, Coolmate™ 1.3, Coolant (4 one-gallon bottles), Remote control (foot or wireless foot), and Weldcraft™ W-280 (WP-280) water-cooled torch kit

Maxstar 280Part No. 907552, Base Machine only.Part No. 907538, Base Machine only with CPS.Part No. 907553, DX Machine onlyPart No. 907539, DX Machine only with CPS

Dynasty 280Part No. 907550, Base Machine only.Part No. 907537, Base Machine only with CPS.Part No. 951466, Base Complete with foot and CPS.Part No. 907551, DX Machine only.Part No. 907514, DX Machine only with CPS.Part No. 951468, DX Complete with foot and CPS.Part No. 951469, DX Complete with wireless foot and CPS.

Welding Process

Input Power



230 V 400 V 460 V 575 V KVA KWMax. Open-



TIG 3-phase 1–280 235 A at 19.4 V, 60% duty cycle 17 15 9 7 6 6.2 6.0 1-phase 235 A at 19.4 V, 60% duty cycle* 28 26 15 13 10 6.0 6.0Stick 3-phase 5–280 200 A at 28 V, 60% duty cycle 20 18 10 9 7 7.2 7.0 1-phase 180 A at 27.2 V, 60% duty cycle* 30 27 15 13 10 6.2 6.2TIG 3-phase 1–280 (DC) 235 A at 19.4 V, 60% duty cycle 19 17 10 9 7 7.0 6.7 1-phase 2–280 (AC) 235 A at 19.4 V, 60% duty cycle* 33 30 17 15 12 6.9 6.8Stick 3-phase 5–280 200 A at 28 V, 60% duty cycle 22 20 11 10 8 8.2 7.9 1-phase 180 A at 27.2 V, 60% duty cycle* 34 31 17 15 12 7.1 7.0

13.6”H x 8.6”W x 22.5”D(346 mm x 219 mm x

569 mm)

60 VDC(11 VDC**)

47 lb. (21.3 kg)50 lb. (22.7 kg)

with CPS

60 VDC(11 VDC**)

52 lb. (23.6 kg)55 lb. (25 kg)

with CPS

AC

/DC

DC

*Refer to owner’s manual for 208 V output ratings and duty cycle. **Sense voltage for Low OCV Stick and Lift-Arc™ TIG.


Aluminum Welding Capability(Dynasty Only)Min - 0.012” (0.3 mm)Max - 3/8” (9.5 mm)

Part No. 300988, Small Runner™ Cart.Part No. 300972, Coolmate™ 1.3.Part No. 043810, Coolant.Part No. 195055, Contractor Kit with RCCS-14 finger control.Part No. 195054, Contractor Kit with RFCS-14 HD foot control.Part No. 300185, W-250 (WP-20) Weldcraft™ Water-Cooled Torch Kit.Part No. 300990, W-280 (WP-280) Weldcraft™ Water-Cooled Torch Kit.Part No. 301268, W-375 Weldcraft™ Water-Cooled Torch Kit.Part No. 043688, RCCS-14 fingertip control.Part No. 194744, RFCS-14 HD foot control.Part No. 300429, Wireless foot control.

Maxstar is DC only.


Maxs

tar

280

Dyna

sty

280


Maxstar® & Dynasty® 350 & 700 DC (Maxstar) & AC/DC (Dynasty) TIG & STICK•Allows for any input voltage hook-up (208–575 V) with no manual linking, providing convenience in any job setting •Blue Lightning™ high-frequency arc starter for more consistent non-contact starts and greater reliability compared to traditional HF arc starters •Lift-Arc™ provides AC or DC arc starting without the use of high frequency •Hot Start™ adaptive control provides positive arc starts •Auto-postflow calculates the length of postflow time based on the amperage setting. Eliminates need to independently set postflow time. •120-volt auxiliary power dual receptacle to power cooling system or small tools •Program memory features nine program memories that maintain/save your parameters •High-speed DC TIG pulse controls capable of 5000 pulses per secondDynasty welders add AC TIG capabilities and the following AC features: •Waveforms for advanced squarewave, soft square-wave, sine wave and triangular wave •Balance control to provide adjustable oxide removal enabling high-quality aluminum TIG welds •Frequency to control arc cone width and improve directional control of arc •AC amplitude/amperage allows EP and EN amperages to be set independently to precisely control heat input to the work and electrodeProcesses:•TIG (GTAW) • Stick (SMAW) • Pulsed TIG (GTAW-P) • Air Carbon Arc (CAC-A)350 Models Come with: 8 ft. (2.4 m) power cord (no plug), Two 50-mm Dinse connectors (350), and Setup video and reference guide700 Models Come with (Power cord NOT included): Thread-lock torch connector, Two thread-lock weld cable connectors, and Setup video and reference guideComplete Packages Come with Above Plus: Runner™ cart, Coolmate™ 3.5, Coolant (4 one-gallon bottles), Remote control (foot or wireless foot), and Weldcraft™ water-cooled torch kit(350: W-375, 700: W-400)Part No. 907334, Maxstar 350, Machine only.Part No. 951624, Maxstar 350, Complete with foot.Part No. 951625, Maxstar 350 ,Complete with wireless foot.Part No. 907103, Maxstar 700, Machine only.Part No. 907204, Dynasty 350, Machine only.Part No. 951626, Dynasty 350, Complete with foot.Part No. 951627, Dynasty 350, Complete with wireless foot.Part No. 907101, Dynasty 700, Machine only.Part No. 951403, Dynasty 700, Complete with foot.Part No. 951404, Dynasty 700, Complete with wireless foot.

Model No.

Input Power



230 V 400 V 460 V 575 V KVA KWMax. Open-



Maxstar 3-phase 3–350 300 A at 32 V, 60% duty cycle 33 30 17 15 12 12.0 11.5350 1-phase 3–350 225 A at 29 V, 60% duty cycle 41 37 — 19 15 8.6 8.2

Maxstar 3-phase 5–700 600 A at 44 V, 60% duty cycle 89 80 46 40 32 32 31700 1-phase 5–700 450 A at 38 V, 60% duty cycle 106 96 — 48 38 22 21

Dynasty 3-phase 3–350 300 A at 32 V, 60% duty cycle 35 32 16 16 13 12.7 12.1350 1-phase 3–350 225 A at 29 V, 60% duty cycle 47 43 — 21 17 9.8 9.1

Dynasty 3-phase 5–700 600 A at 44 V, 60% duty cycle 97 88 51 44 35 35 34700 1-phase 5–700 450 A at 38 V, 60% duty cycle 115 104 — 52 42 24 22

24.75”H x 13.75”W x 22”D (629 mm x 349 mm

x 559 mm)

24.75”H x 13.75”W x 22”D (629 mm x 349 mm

x 559 mm)

34.5”H x 13.75”W x 22”D (876 mm x 349 mm x

559 mm)

34.5”H x 13.75”W x 22”D (876 mm x 349 mm x

559 mm)

75 VDC(10 –15 VDC*)

75 VDC(10 –15 VDC*)

60 VDC(11 VDC*)

75 VDC(10 –15 VDC*)

135 lb. (61 kg)

198 lb. (90 kg)

198 lb. (90 kg)

135 lb. (61 kg)

AC

/DC

DC

Maxstar is DC only.

MILLER®


Mild Steel Welding CapabilityModel 350: Min - 0.012” (0.3 mm) Max - 5/8” (15.9 mm)Model 700: Min - 0.020” (0.5 mm) Max - 1” (25.4 mm)

Aluminum Welding Capability(Dynasty Only)Model 350: Min - 0.015” (0.4 mm) Max - 5/8” (15.9 mm)Model 700: Min - 0.020” (0.5 mm) Max - 1” (25.4 mm)

Part No. 300244, Runner™ Cart.Part No. 300245, Coolmate™ 3.5.Part No. 043810, Coolant.Part No. 300185, W-250 (WP-20) Weldcraft™ Water-Cooled Torch Kits.Part No. 301268, W-375 Weldcraft™ Water-Cooled Torch Kits.Part No. 300186, W-400 (WP-18SC) Weldcraft™ Water-Cooled Torch Kits.Part No. 043688, RCCS-14 fingertip control.Part No. 194744, RFCS-14 HD foot control.Part No. 300429, Wireless foot control.

*Sense voltage for Low OCV Stick and Lift-Arc™ TIG.

Weldcraft™ TungstenTungsten for the most demanding TIG welding applications! Available in four types and industry-standard diameters, the line of Weldcraft tungsten elec-trodes has under gone rigorous testing to ensure the highest quality and durability. Colour-coded packages include ten 7” (175 mm) tungsten electrodes.

2% Ceriated (EWCe-2)Performs well in DC welding and arc starting at low-current settings, and offers excellent performance in AC processes.Part No. WC040X7, 0.040” (1.0 mm).Part No. WC116X7, 1/16” (1.6 mm).Part No. WC332X7, 3/32” (2.4 mm).Part No. WC018X7, 1/8” (3.2 mm).Part No. WC532X7, 5/32” (4.0 mm).

2% Lanthanated (EWLa-2)Provides excellent arc starting, arc stability and re-ignition, and less tip erosion in AC or DC welding. Can substitute for 2% Thoriated.Part No. WL2040X7, 0.040” (1.0 mm).Part No. WL2116X7, 1/16” (1.6 mm).Part No. WL2332X7, 3/32” (2.4 mm).Part No. WL2018X7, 1/8” (3.2 mm).Part No. WL2532X7, 5/32” (4.0 mm).

Pure (EWP)Forms a clean, balled end when heated and provides good arc stability for AC welding with a balanced or unbalanced squarewave or sine wave.Part No. WP116X7, 1/16” (1.6 mm).Part No. WP332X7, 3/32” (2.4 mm).Part No. WP018X7, 1/8” (3.2 mm).

Rare Earth (EWG)Combines the best of all alloying elements, and provides excellent arc stability in AC or DC welding.Part No. WG116X7, 1/16” (1.6 mm).Part No. WG332X7, 3/32” (2.4 mm).Part No. WG018X7, 1/8” (3.2 mm).


MILLER®

Weldcraft™ TIG TorchesMLR/2784

Weldcraft™ A-125 SERIES TORCHES - AIR-COOLED•Air-cooled torches designed for optimal control while welding thin-gauge materials, especially in hard-to-reach places •The lightweight body reduces fatigue and downtime, and increases operator comfort •Perfected control. The gas valve in the A-125 Valve offers improved shielding gas control. •Flexibility. Using the A-125 Flex, the flexible neck easily adjusts to any angle for improved torch control. •The pencil-style model without a back cap allows for su-perior access to confined areas (A-125 Pencil) •Combine the flexible neck and gas valve for welding limited-access joints using power sources without gas solenoids (A-125 Flex Valve)

Weldcraft™ A-150 SERIES TORCHES - AIR-COOLED•Versatile and innovative air-cooled torches designed for maximum comfort in a variety of applications •Diamond Grip™ head design (A-150 and A-150 Valve) has ergonomic contact points for thumb and fingers. Provides a more comfortable grip and reduces operator fatigue. •Improve control and comfort with the A-150 Flex and the flexible neck that allows access into hard-to-reach areas •Maximum versatility. Utilize the Redhead Series torches in a variety of welding applications without adding expenses. •Ribbed handle and torch design provide cool operation and maximum operator comfort while reducing downtime caused by operator fatigue •Available with 12.5 or 25 ft., single or heavy-duty two-piece cable assembly determined by the compatibility of the power source. Heavy-duty cable assembly allows use of a larger conductor for the power cable which simplifies repair and replacement making it ideal for field applications.

Synonymous with versatility and performance, Weldcraft TIG torches can handle the most intricate to the most demanding TIG welding challenges. From 125-amp hand-held MicroTIG® torches to 900-amp machine-held water-cooled models, there’s a Weldcraft torch for nearly every TIG application.

Model

Model

Rubber Part No.

Rubber Part No.

2-Piece Rubber Part No.

Mono-Flex™ Rubber Part No. Mono-Flex™ Rubber Part No.

12.5 ft. (3.8 m)

12.5 ft. (3.8 m)

12.5 ft. (3.8 m)

12.5 ft. (3.8 m) 12.5 ft. (3.8 m)

25 ft. (7.6 m)

25 ft. (7.6 m)

25 ft. (7.6 m)

25 ft. (7.6 m) 25 ft. (7.6 m)

A-125 WP-9-12-R WP-9-25-R — —A-125 Valve WP-9V-12-R WP-9V-25-R WP-9V-12-2 WP-9V-25-2A-125 Flex WP-9F-12-R WP-9F-25-R — —A-125 Flex Valve WP-9FV-12-R WP-9FV-25-R WP-9FV-12-2 WP-9FV-25-2A-125 Pencil WP-9P-12-R WP-9P-25-R — —

A-150 WP-17-12-R WP-17-25-R WP-17-12-MF WP-17-25-MF WP-17-12-2 WP-17-25-2A-150 Valve WP-17V-12-R WP-17V-25-R — WP-17V-25-MF WP-17V-12-2 WP-17V-25-2A-150 Flex WP-17F-12-R WP-17F-25-R — — WP-17F-12-2 WP-17F-25-2A-150 Flex Valve WP-17FV-12-R WP-17FV-25-R — — WP-17FV-12-2 WP-17FV-25-2A-150 Flex Valve Redhead™ WP-R17FV-12-R WP-R17FV-25-R — — — —A-150 PSH* — WP-17-25-R-PSH — — WP-17-12-2-PSH —A-150 Valve PSH* WP-17V-12-R-PSH WP-17V-25-R-PSH — — — —

Rated OutputDC: 125 A at 60% duty cycleAC: 100 A at 60% duty cycleElectrode Range.020 – 1/8” (0.5 – 3.2 mm)

Rated OutputDC: 150 A at 60% duty cycleAC: 115 A at 60% duty cycleElectrode Range.020 –1/8” (0.5 – 3.2 mm)

Weldcraft™ A-125 SERIES CONSUMABLESPart No. 13N22, 1/16” (1.6 mm) Collet.Part No. 13N23, 3/32” (2.4 mm) Collet.Part No. 13N24, 1/8” (3.2 mm) Collet.Part No. 13N27, 1/16” (1.6 mm) Collet Body.Part No. 13N28, 3/32” (2.4 mm) Collet Body.Part No. 13N29, 1/8” (3.2 mm) Collet Body.Part No. 13N10, #6, 3/8” Alumina Nozzle.Part No. 13N11, #7, 7/16” Alumina Nozzle.Part No. 13N12, #8, 1/2” Alumina Nozzle.Part No. AK1C, Accessory Kit. Includes one long back cap, one of each size (#4, #5, #6) alumina nozzle, and one of each size (.040, 1/16”) of the following: collet, collet body, and 7” 2% ceriated tungsten electrode.

Weldcraft™ A-150 SERIES CONSUMABLESPart No. 10N23, 1/16” (1.6 mm) Collet.Part No. 10N24, 3/32” (2.4 mm) Collet.Part No. 10N25, 1/8” (3.2 mm) Collet.Part No. 10N31, 1/16” (1.6 mm) Collet Body.Part No. 10N32, 3/32”(2.4 mm) Collet Body.Part No. 10N28, 1/8” (3.2 mm) Collet Body.Part No. 10N48, #6, 3/8” Alumina Nozzle.Part No. 10N47, #7, 7/16” Alumina Nozzle.Part No. 10N46, #8, 1/2” Alumina Nozzle.Part No. AK-150MFC, Accessory Kit. Allows A-150 torch customization. Converts into 28 different torch styles while using existing cable. Includes collets, collet bodies, nozzles, torch heads, handle and more.

Weldcraft™ A-200 SERIES TORCHES - AIR-COOLED•Dependable, top-performing air-cooled torches designed for heavy-duty welding applications •Eliminate the expense of a water-cooled system. The air-cooled capability pairs reliability with cost-effectiveness for all field applications. •Robust performance. The heavy copper construction delivers maximum welding capacity for rugged fieldwork. •Effortless adjustments. The A-200 Valve provides a gas control valve to ensure a quick, easy adjustment of shielding gas flow. •Flexibility. Using the A-200 Flex, the flexible neck easily adjusts to any angle for better torch control in limited-access joints. •Combining the flexible neck and gas valve advances capabilities with greater comfort and control (A-200 Flex Valve)

ModelRubber Part No. 2-Piece Rubber Part No.

12.5 ft. (3.8 m) 25 ft. (7.6 m)25 ft. (7.6 m)A-200 WP-26-12-R WP-26-25-R WP-26-25-2A-200 Valve WP-26V-12-R WP-26V-25-R WP-26V-25-2A-200 Flex — WP-26F-25-R WP-26F-25-2A-200 Flex Valve WP-26FV-12-R WP-26FV-25-R WP-26FV-25-2

Rated OutputDC: 200 A at 60% duty cycleAC: 150 A at 60% duty cycleElectrode Range.020 – 5/32” (0.5 – 4.0 mm)

Weldcraft™ A-200 SERIES CONSUMABLESPart No. 10N23, 1/16” (1.6 mm) Collet.Part No. 10N24, 3/32” (2.4 mm) Collet.Part No. 10N25, 1/8” (3.2 mm) Collet.Part No. 10N31, 1/16” (1.6 mm) Collet Body.Part No. 10N32, 3/32” (2.4 mm) Collet Body.Part No. 10N28, 1/8” (3.2 mm) Collet Body.Part No. 10N47, #7, 7/16” Alumina Nozzle.Part No. 10N46, #8, 1/2” Alumina Nozzle.Part No. 10N45, #10, 5/8” Alumina Nozzle.Part No. AK3C, Accessory Kit. Includes one short back cap, one of each size (#5, #6, #8) alumina nozzle, and one of each size (1/16, 3/32, 1/8”) of the following: collet, collet body, and 7” 2% ceriated tungsten electrode.

A-200 Flex Valve

A-150 Valve PSH

A-125


Bobcat™ SERIES - GAS, LP & DIESEL•The Bobcat engine-driven welder/generators have been the top-selling in their class because they are engineered to be reliable, powerful and durable from the start.•Quieter and better sound. Gas models deliver significant improvements in sound level and quality for better jobsite communication and a safer, more efficient working environment. By rotating the engine toward the front we created a more efficient airflow, resulting in significantly quieter operation. You can start jobs earlier, end later, and work around noise-sensitive areas.•Smaller and lighter design. Bobcat welder/generators take up less space on trucks and trailers — leaving more room for other equipment and tools. Plus, they’re easier to move around jobsites— even with weld cables and running gear attached.• Easier maintenance. Easy-to-read front panel maintenance displays show when your equipment needs to be serviced. With the intuitive design, the daily maintenance is fast and easy: •Oil checks from the top by the front panel •Toolless panels that allow for quick access •Single-side fuel fill and oil drain/filter•Optional Electronic Fuel Injection (EFI). Available on the Bobcat 250 gas model only. Use up to 27 percent less fuel, saving money and improving your bottom line. •Smooth power. Better power means better performance. Our Bobcat welder/ generators have smoother power — not the spiked power found with other brands — because of: •Revolutionary ten-degree skewed-rotor design •Optimized generator performance•Accu-Rated™– not inflated generator power. Our Accu-Rated peak power is usable for maximum generator loads, including plasma cutters, wire welders and motor starting. It also beats the competition’s very short-duration peak or surge power. Accu-Rated power delivers: •11,000 watts (12,000 on Bobcat 250 with EFI) of usable peak power •Peak power delivered for a minimum of 30 seconds•Large 12-gallon fuel capacity means many hours of run time before refueling.•Versatile AC and DC weld output provides quality welds on all types of metals. DC is smooth and easy to run while AC Stick is used when arc blow occurs.•Maintenance displays show engine hours and hours left before an oil change is due.•Heavy-duty construction. All internal components are designed to handle the harshest environments and will run better and last longer.Processes:•AC/DC Stick (SMAW) • MIG (GMAW)1 • Flux-Cored (FCAW)1 •AC2/DC TIG (GTAW) • Air Carbon Arc Cutting and Gouging (CAC-A)3 (rated 3/16”. carbons)1With voltage-sensing feeder only.2With Dynasty® 200 Series or HF-251 (non-critical).3Bobcat 250 models only.Engines: Gas—Kohler CH730: 23.5 HP at 3600 RPM.EFI Gas—Kohler ECH730: 23 HP at 3600 RPM.LP—Kohler CH730 (Liquid withdrawal LP system): 21 HP at 3600 RPM. V-twin-cylinder, four-cycle, overhead valve, industrial, air-cooled.EPA Tier 4 compliant! Diesel—Kubota D722: 19 HP at 3600 RPM. Three-cylinder, industrial, liquid-cooled.

Bobcat™ 225 (Gas)•Cost-effective, multiprocess machine primarily used for Stick welding. Great for farm, ranch, maintenance/repair operations and as a stand-alone generator.

EFI GAS ENGINEElectronic fuel injection (EFI) gas engines optimize the air/fuel ratio for all engine speeds and engine loads, resulting in lower operational costs, fewer emissions, longer runtimes and better performance when compared to carbureted models. The payback from fuel savings alone is a matter of months.EFI advantages (vs. carburetor models): •12,000 watts of generator power •Up to 27% better fuel efficiency •Extended runtimes up to 27% •Fast, easy starts in all climates •Reliable operation, even with infrequent use •Fewer emissions — 27% less CO and 33% lower HC+NOx levels

Bobcat™ 3 Phase (Gas)•Designed for farm and ranch owners in need of single and three-phase power to run 480 V three-phase pivot irrigation systems or to provide backup power for home, farm and ranch.

Bobcat™ 250 (Gas, LP or Diesel)•Rugged multipurpose engine drives are ideal for mobile main-tenance trucks where reduced size and weight are essential. They are great for Stick and Flux-Cored welding, Carbon Arc gouging, and are designed to handle maintenance/repair, construction, farm/ranch, and generator use.•Front panel fuel gauge provides convenient fuel level indica-tion.•Smoother weld output and better generator power while welding.•More weld output than 225-amp welder generators for more versatility. 72%more power for MIG/FCAW, 67% more for AC welding, and 11% more for DC Stick.

MILLER®

Engine-Driven WeldersMLR/2778/2784

Model Welding Mode Process Rated Output at 104° F (40° C) Dimensions Net

WeightGenerator Power at

104° F (40° C)Amp/VoltRanges

Part No. Features

Bobcat 907498001 Kohler CC/AC Stick/TIG 70–150 A 150 A at 25 V, 100% duty cycle225 907498 Kohler with GFCI CC/DC Stick/TIG 50– 225 A 225 A at 25 V, 100% duty cycle CV/DC MIG/FCAW 19– 28 V 200 A at 20 V, 100% duty cycleBobcat 907505 Kohler with GFCI CC/AC Stick/TIG 50– 200 A 200 A at 25 V, 100% duty cycle3 Phase CC/DC Stick/TIG 50– 210 A 210 A at 25 V, 100% duty cycle CV/DC MIG/FCAW 19– 28 V 200 A at 20 V, 100% duty cycleBobcat 907500001 Kohler CC/AC Stick/TIG 40– 250 A 250 A at 25 V, 60% duty cycle250 907500 Kohler with GFCI 40– 275 A w/EFI 225 A at 25 V, 100% duty cycle 907500002 Kohler with electric fuel pump* CC/DC Stick/TIG 40– 250 A 250 A at 25 V, 100% duty cycle 907502 EFI Kohler 40– 275 A w/EFI 907504 LP Kohler with GFCI CV/DC MIG/FCAW 17– 28 V 275 A at 25 V, 60% duty cycle 250 A at 25 V, 100% duty cycleBobcat 907565 Kubota with GFCI CC/AC Stick/TIG 40– 275 A 250 A at 25 V, 100% duty cycle250 CC/DCDiesel CV/DC MIG/FCAW 17– 28 V 275 A at 25 V, 60% duty cycle 250 A at 28 V, 100% duty cycle

Part No. 300517, Full KVA Adapter Cord.Part No. 300975, GFCI Panel Mount 120 VAC Duplex Kit.Part No. 300976, Electric Fuel Pump Kit (gas models only). Part No. 300924, Spark Arrestor Kit (gas models only).

Single-phasePeak: 11,000 wattsContinuous: 9500 wattsSingle-phase/Three-phasePeak: 11,000 wattsContinuous: 9500 watts/10,000 watts

28”H (711 mm)32.75”H (832 mm) to top of exhaust20”W (508 mm)40.5”D (1,029 mm)

485 lb.(220 kg)

495 lb.(225 kg)

501 lb.(227 kg)

638 lb.(289 kg)

Single-phasePeak: 11,000 wattsContinuous: 9500 wattsEFI ModelPeak: 12,000 wattsContinuous: 10,500 watts

Single-phasePeak: 11,000 wattsContinuous: 9500 watts

28”H (711 mm)32.75”H (832 mm)to top of exhaust20”W (508 mm)40.5”D (1,029 mm)


Gaso

line

Gas o

r LP

Dies

el


*Recommended for operation at altitudes above 5,000 ft.


Trailblazer® SERIES - GAS, LP & DIESEL•The Trailblazer welder/generators deliver unbeatable arc performance, the smoothest, most stable arc in the industry and an independent welder and generator power system.•Long runtimes - Stop less for refueling and get more work done. •Fuel efficient - Save money and improve your bottom line. •User friendly - Easy-to-read front panel maintenance displays show when your equipment needs to be serviced. With the intuitive design, the daily maintenance is fast and easy: •Oil checks from the top by the front panel •Sunvision™ technology that provides easy-to-read digital meter •Toolless panels that allow for quick access •Single-side fuel fill and oil drain/filter•Quiet - Low sound output — so you can work earlier, later, and around noise-sensitive areas. Up to 68% quieter with the gas models and up to 40% quieter with the diesel model.•Smart-Cor™ technology - A lighter Trailblazer that takes up less space.•Arc performance - Three Stick modes — EXX18, EXX10 and Gouge •Two Wire modes — Solid and Flux-Core •Three Lift-Arc™ TIG modes — Auto-Stop™, Auto-Crater™ and Pulse•Self-calibrating digital weld meters with maintenance displays - Preset and actual weld amperage/voltage •Process settings •Fuel gauge •Hour meter function and oil change interval •Engine speed (RPM)•Accu-Rated™– not inflated generator power - The Accu-Rated peak power is usable for maximum generator loads, including plasma cutters, wire welders and motor starting. It also beats the competition’s very short-duration peak or surge power. Accu-Rated power delivers: •12,000 watts of usable peak power •Peak power delivered for a minimum of 30 seconds•Large 12-gallon fuel capacity - means many hours of run time before refueling.•Heavy-duty construction - All internal components are designed to handle the harshest environments and will run better and last longer.Processes:•Stick (SMAW) • MIG (GMAW)1

• Flux-Cored (FCAW)1 • DC TIG/Pulsed TIG (GTAW/GTAW-P)2 • Air Carbon Arc Cutting and Gouging (CAC-A) (rated 3/16” carbons, capable 1/4” carbons)3

1With wire feeder.2Two-piece TIG torch recommended.3Trailblazer 325 model only.Engines: Gas—Kohler CH730: 23.5 HP at 3600 RPM.EFI Gas—Kohler ECH730: 23 HP at 3600 RPM.LP—Kohler CH730 (Liquid withdrawal LP system): 21 HP at 3600 RPM. V-twin-cylinder, four-cycle, overhead valve, industrial, air-cooled.EPA Tier 4 compliant! Diesel—Kubota D902: 24.8 HP at 3600 RPM. Three-cylinder, industrial, liquid-cooled.

Model Welding Mode Process Rated Output at 104° F (40° C) Dimensions Net

WeightSingle-Phase Generator Power at 104° F (40° C)

Amp/VoltRanges

Part No. Features

Trailblazer 907506 Kohler with GFCI CC/DC Stick/TIG 10– 275 A 275 A at 28 V, 100% duty cycle275 907509 LP Kohler with GFCI CV/DC MIG/FCAW 10– 35 V 275 A at 28 V, 100% duty cycle

Trailblazer 907510001 Kohler CC/DC Stick/TIG 10– 325 A 325 A at 28 V, 100% duty cycle325 907510 Kohler with GFCI 907510002 Kohler w/electric fuel pump 907512 EFI Kohler CV/DC MIG/FCAW 10– 35 V 325 A at 28 V, 100% duty cycle 907512001 EFI Kohler with Excel power 907512002 EFI Kohler with Excel power and battery charge/jump startTrailblazer 907566001 Kubota CC/DC Stick/TIG 10– 325 A 325 A at 33 V, 100% duty cycle325 Diesel 907566 Kubota with GFCI 907566002 Kubota with Excel power CV/DC MIG/FCAW 10– 35 V 325 A at 33 V, 100% duty cycle

Peak:12,000 watts11,000 watts (LP)Continuous:10,500 watts9500 watts (LP)Excel Power (optional)2400 watts20 A at 120 V, 60 Hz pure generator power at idle speed and while welding.



459 lb.(208 kg)

460 lb.(209 kg)

620 lb.(281 kg)

Gaso

line

Gas o

r LP

Dies

elMILLER®


Base Model Exclusive Technologies

Options To Maximize Your Trailblazer 325 Performance

Smart-Cor™ technology.Independent weld and generator power in an improved, more compact design. Benefits it provides:•No interaction between jobsite tools and the welding arc•Stronger, cleaner, more efficient generator power•Reduced size and weight•Improved arc performance

Auto-Speed™ technology.Automatically adjusts the engine speed to run at lower speeds depending on the total power needed. Benefits it provides:•Exceptional fuel efficiency•Extended runtimes•Quieter operation•Reduced emissions

Innovative design.Engine is rotated to the front in the gas model to create more efficient airflow. Benefits it provides:•Quieter operation•Reduced size and weight•Easier maintenance

Excel PowerExcel power improves generator performance by providing 120-volt, 60 hertz of pure sine wave generator power at idle speed and while welding. When connected to the Excel power receptacle, you get up to 2400 watts of the cleanest generator power available. Plus you can run most jobsite tools — like lights, drills, grinders and chop saws—at idle speed, which provides:•Exceptional fuel efficiency•Extended runtimes•Quieter operation Longer engine life

EFI (Gas Models)Electronic fuel injection (EFI) maximizes performance by opti-mizing the air/fuel ratio for all engine speeds and loads. ChooseEFI for:•Up to 27% better fuel economy•Extended runtimes up to 27%•Fast, easy starts in all climates•Reliable operation, even with infrequent use•Fewer emissions — 27% less CO and 33% lower HC+NOx levels

Battery Charge/Jump Start (Gas Models)Reduce downtime with battery charge/jump start capability. Designed and recommended for mechanics or anyone else responsible for a fleet of trucks or equipment. By using your Trailblazer to charge dead batteries or jump a stubborn engine, you’ll keep your crew working and the fleet up and running.


Part No. 130831, Spoolmatic® 30A ControlPart No. 137549, WC-24 Control Part No. 300517, Full KVA Adapter Cord (pg 103) Part No. 300976, Electric Fuel Pump Kit* (gas models only)



MILLER®


Trailblazer® 302 Air Pak™ - GASOLINE•Powerful all-in-one tool designed for repair and construction with multiprocess weld quality, generator power, air compressor and battery charge/jump start •Superior arc performance. Preset dig settings optimized for the majority of Stick welding applications, best-in-class Wire arc performance, and two Lift-Arc™ TIG modes for most DC TIG applications •Strongest combined generator/compressor power. Delivers an industry-leading 13,000 watts of peak generator power independent of weld settings — can power a Spectrum® 875 plasma cutter, and provide air for plasma cutting at the same time (rated 5/8” mild steel). •Rotary screw air compressor. Delivers up to 31 CFM and 160 PSI of air with no storage tank. Gives 100% deliverable air and runs many tools at idle speed. Air outputs are rated at an industry-high 40°C (104°F). Front panel air pressure adjustment and automatic overpressure shutdown with indication. Designed for more than 30,000 hours of operation and warranted for three years by Miller. •Battery charge/jump start. Provides selectable 12 or 24-volt battery charging capability with up to 450 amps of battery jump-starting capability. Convenient front panel battery charger/jump starter access.Processes:• AC/DC Stick (SMAW) • MIG (GMAW)1 • Flux-Cored (FCAW)1 •AC2/DC3 TIG (GTAW) • Air Carbon Arc Cutting and Gouging(CAC-A) (rated 3/16” carbons, capable 1/4” carbons)1 With wire feeder.2With Dynasty® 200 Series or HF-251 (non-critical).3Two-piece TIG torch recommended.Engine:Gasoline - Kohler CH750: 27 HP at 3600 RPM. V-twin-cylinder, four-cycle, overhead valve, industrial, air-cooled.Part No. 907549001, Kohler.Part No. 907549, Kohler with GFCI and electric fuel pump.Part No. 907549003, Kohler with GFCI, cooler/separator and electric fuel pump.Part No. 130831, Spoolmatic® 30A Aluminum Spool Gun. Part No. 137549, WC-24 Control.

Big Blue® 350 PipePro - DIESEL•Designed for transmission pipeline work, this system offers a complete welding solution. With Stick as well as MIG/FCAW welding capabilities it is ideal for the most demanding pipeline jobs. •Easy arc starts and better arc control provide improved performance to produce more consistent welds •Enhanced MIG/FCAW arc control for best in class performance •The Vault—ultimate control board reliability. A sealed aluminum case protects the circuit board from dust, dirt, moisture and heat. •Low OCV Stick (VRD) for improved operator safety without compromising arc starts •Auto Remote Sense™ (ARS) eliminates confusion of a remote/panel switch •Compact size and weight optimizes truck space •LINE-X® cover provides superior impact, corrosion and abrasion protection •Quiet operation. Only 70.7 decibels under full load. •Improves jobsite communication and safety •EPA, CSA, IEC and NEMA compliant •Standard features include digital preset weld meters, auto idle, 120-volt block heater and output contactor control •Optional stainless steel package availableProcesses:•Stick (SMAW) •MIG (GMAW) •Flux-Cored (FCAW) •TIG (GTAW) •Air Carbon Arc Cutting and Gouging (CAC-A) (rated 1/4” carbons)Engines:Diesel EPA Tier 4 Final choicesCAT C1.5T: 24.7 HP at 1800 RPM. Turbo 3-cylinder, industrial, liquid-cooled.Mitsubishi S4L2: 24.7 HP at 1800 RPM. Four-cylinder, industrial, liquid-cooled.Part No. 907478, Big Blue 350 PipePro with CAT Turbo engine drive.Part No. 907478001, Big Blue 350 PipePro with CAT Turbo engine drive with stainless steel.Part No. 907428, Big Blue 350 PipePro with Mitsubishi engine drive.Part No. 907428001, Big Blue 350 PipePro with Mitsubishi engine drive with stainless steel.

Welding Mode

Welding Mode

Process

Process

Rated Output at 104° F (40° C)

Rated Output at 104° F (40° C)

Dimensions

Dimensions

Net Weight

Net Weight

Single-Phase Generator Power at 104° F (40° C)

Single-Phase Generator Power at 104° F (40° C)

Amp/VoltRanges

Amp/VoltRanges

CC/DC Stick/TIG 10– 300 A 280 A at 32 V, 100% duty cycleCV/DC MIG/FCAW 13– 35 V, 350 A 300 A at 32 V, 100% duty cycle 350 A at 32 V, 60% duty cycleCC/AC TIG/Stick 10– 225 A 200 A at 25 V, 60% duty cycle

CC/DC TIG/Stick 20–400 ACV/DC MIG/FCAW 14–40 V

Peak: 13,000 wattsContinuous: 11,000 watts


300 A at 32 V, 100% duty cycle350 A at 27 V, 100% duty cycle400 A at 24 V, 100% duty cycle

28”H (711 mm)34.5”H (876 mm) to top of exhaust20”W (508 mm)59.625”D (1514 mm)

32”H x 26.25”W x 56”D (813 mm x 667 mm x 1,422 mm)

771 lb. (350 kg)

Caterpillar: 1,063 lb. (482 kg)Mitsubishi: 1,018 lb. (462 kg)

Air CompressorRotary screw with electric clutch for on/off. Oil change intervals 500 hours.Free Air Delivery @ 3600 RPM: 31 CFM (0.88 m3/min.) 3000 RPM: 28 CFM (0.79 m3/min.) 2400 RPM (Idle): 22 CFM (0.62 m3/min.)Working Pressure Constant: 80–160 PSIGDuty Cycle: 100%Oil Capacity: 1.75 qt. (1.7 L)

Blue Star® 185 - GASOLINE•Reliable outdoor portable power! Great for farm, ranch, maintenance, construction and hobbyist •Compact and portable, its small footprint uses little truck space •Optional running gear also makes the Blue Star one-man portable •Stick and TIG capable •Accu-Rated™ peak generator power is usable for maximum generator loads such as plasma cutting, Millermatic® MIG welders and motor starting •Includes electric start, 120 VAC GFCI and 240 VAC receptacles, 6.25-gallon fuel capacity, auto-idle and engine hour meterProcesses:• Stick (SMAW) • TIG (GTAW)Engine: Gasoline engine - Kohler CH440: 13.4 HP at 3600 RPM. One-cylinder, four-cycle, OHV, air-cooledPart No. 907664, Blue Star® 185.Part No. 195353, Lifting Eye.Part No. 301246, Running Gear.Part No. 301245, Protective Cover.

Amperage Range

Welding Mode

Welding Process Rated Output Single-Phase Generator

Power at 104° F (40° C)CC/DC DC Stick/TIG 60–195 185 A at 25 V, 20% duty cycle Peak: 6500 watts 150 A at 25 V, 100% duty cycle Continuous: 6200 watts


24.75”H x 20.625”W x 31.25”D (629 mm x 524 mm x 794 mm)

296 lb. (134 kg)


Big Blue® 400 Pro - DIESEL•Clean, quiet and reliable low-speed EPA-compliant diesel is more efficient than ever before. Ideal for construction, piping and fleet use. •400-amp output now available in a compact package. Provides up to 400 amps at 100% duty cycle. •The Vault—ultimate control board reliability. A sealed aluminum case protects the circuit board from dust, dirt, moisture and heat. •Low OCV Stick (VRD) for improved operator safety without compromising arc starts •Tailored arc control (DIG) allows arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010. •Quiet operation. Only 71.6 decibels (96 Lwa) under full load. Improves jobsite communication and safety. •CSA, IEC and NEMA compliant •Stan-dard features include digital weld meters, auto idle, 120-volt block heater and output contactor controlProcesses:• Stick (SMAW) • MIG (GMAW) • Flux-Cored (FCAW) • TIG (GTAW) • Air Carbon Arc Cutting and Gouging (CAC-A) (rated 3/16” carbons)Engines:Diesel EPA Tier 4 Final choicesKubota V1505: 20.2 HP at 1800 RPM. Four-cylinder, industrial, liquid-cooled.Mitsubishi S4L2: 24.7 HP at 1800 RPM. Four-cylinder, industrial, liquid-cooled.Part No. 907606, Big Blue® 400 Pro with Kubota engine.Part No. 907605, Big Blue® 400 Pro with Mitsubishi engine.

MILLER®


Welding Mode Process Rated Output at 104° F (40° C) Dimensions Net WeightSingle-Phase Generator

Power at 104° F (40° C)Amp/VoltRanges

CC/DC TIG/Stick 20–400 ACV/DC MIG/FCAW 14–40 V


300 A at 32 V, 100% duty cycle350 A at 27 V, 100% duty cycle400 A at 24 V, 100% duty cycle

32”H x 26.25”W x 56”D (813 mm x 667 mm x 1,422 mm)

Kubota 950 lb. (431 kg)Mitsubishi 993 lb. (450 kg)

Big Blue® 450 Duo CST™ - DIESEL•Durable dual-operator welder/generator delivers proven CST 280 Stick/TIG performance for maximum productivity and efficiency. Two separate outputs powered by one low-speed diesel engine delivers 280 amps of output per operator. •Two superior arcs in one compact package •Save fuel, reduce maintenance costs and increase productivity •Quiet operation. At 72.2 decibels at 23 ft. (7 m) under full load, it’s quieter than most single-operator models. Improves jobsite communication and safety. •Vandalism lockout kit. Lockable hinged steel panel protects front control and ignition switch. •Simple-to-operate process selector knob auto-matically sets proper DIG setting on E6010 and E7018 electrodes providing superior Stick performance •Lift-Arc™ start for TIG starts without the use of high frequency •Remote amperage control permits the use of standard and wireless amperage control devices •Increased efficiency. More arcs and better fuel economy equal increased profits for your business. Estimated savings are 34% with a dual-operator unit versus two single-operator units.Processes:• Stick (SMAW) • TIG (GTAW) • Air Carbon Arc Cutting and Gouging (CAC-A) (rated 3/16” carbons, capable 1/4” carbons)Engines:EPA Tier 4 FinalMitsubishi S4L2: 24.7 HP at 1800 RPM. Four-cylinder, industrial, liquid-cooled.Part No. 907477, Big Blue® 450 Duo CST.Part No. 119172, Single-Phase Full KVA Plug Kit.Part No. 195301, Protective Cover.

Process Rated Output at 122°F (50°C) Dimensions Net WeightSingle-Phase Generator Power at 122°F (50°C)Output Mode Amperage Range

DC Stick/TIG Separate (dual outputs) 5–225 A (each side) 175 A at 27 VDC, 100% duty cycle 5– 280 A (one side only) Paralleled (combined) 10– 450 A 350 A at 27 VDC, 100% duty cycle

Continuous: 10,000 watts32”H x 26.25”W x 56”D (813 mm x 667 mm x

1,422 mm)

1,064 lb. (483 kg)


Spectrum® SERIES PLASMA CUTTERS•Power Factor Correction (PFC). Uses less energy by utilizing input power more efficiently and increases productivity by reducing nuisance circuit breaker trips •LED indicators for easy trouble-shooting •Non-high-frequency arc starting does not interfere with or damage controls or computers •Postflow cooling circuitry extends life of the consumable and torch by cooling them with postflow air after trigger is released •Auto-Refire™ provides ultimate convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal •Built-in gas/air filter and regulator. Provides air filtration of airborne particles five microns and larger. Additional filtration and water separation recommended. •LVC™ line voltage compensation provides peak performance power under variable input voltage conditions for clean, steady cuts •Wind Tunnel Technology™ prevents abrasive dust and particles from damaging internal components •Fan-On-Demand™ cooling system only operates when needed, reducing the amount of airborne dust/dirt pulled through the unit •Quick connect flexible work cable with heavy-duty clampSpectrum® 625 And 875/875 Auto-Line Hand-Held And Machine Torches: •Ultra-Quick Connect™ hand-held torches with flexible cables. XT40 (625 X-TREME™) and XT60 (875 models) hand-held torches feature quick torch connection, ergonomic handles to help prevent operator fatigue and flexible cables that make maneuvering easier •Machine torch capable. 625 X-TREME™ and both 875 models can be ordered with a machine torch or can be converted to use a machine torch with optional Automation Kits •Long and short body machine torches. XT40M (625 X-TREME™) and XT60M (875 models) machine torches are available in long or short body configurations. XT60M is also available in 25 or 50 ft. cable lengths.Processes:•Air Plasma Cutting • Air Plasma Gouging (625/875 models)

Spectrum® 375 X-TREME™/625 X-TREME™•Allows for any input voltage hook-up (120– 240 V, singlephase, 50/60 Hz for 375 XT and 60 Hz for 625 XT) with no manual linking, providing convenience in any job setting •X-CASE™ provides the ultimate protection during transport and storage. Additional space is ideal for MVP plugs, consumables box, gloves, etc. •Multi-voltage plug (MVP™) on 375 XT or MVP™ adapter on 625 XT allows connection to 120 or 240-volt receptacles without tools •Automatic air regula-tion compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting performance •Automatic gouging consumable detection (625 XT only). Detects gouging consumable and adjusts gas pressure to optimize performance, eliminating the need for a manual regulator. •375 XT model includes XT30 hand-held torch with ergonomic design and flexible cable •625 XT model includes Ultra-Quick Connect™ XT40 hand-held torch with ergonomic design and flexible cable; or XT40M long body or short body machine torch375 X-TREME Comes Complete with: XT30 hand-held torch with 12 ft. (3.7 m) cable, Heavy-duty work clamp with 12ft. (3.7 m) flexible cable, 10 ft. (3 m) power cord with MVP 5-15P (120 VAC, 15 A) and 6-50P (240 V, 50 A) plugs, X-CASE for protection and storage, Shoulder strap, and Consumables box with two electrodes,two tips, deflector and air fitting625 X-TREME Comes Complete with: XT40 hand-held torch with 12 ft. (3.7 m) or 20 ft. (6.1 m) cable; OR XT40M long body or short body machine torch with 25 ft. (7.6 m) cable, Heavy-duty work clamp and flexible cable with quick connect, 12 ft. (3.7 m) power cord with 240 V, L6-30P twist lock plug, MVP adapters with 5-15P (120 VAC, 15 A) and 6-50P (240 V, 50 A) plugs, X-CASE for protection and storage, Shoulder strap, Consumables box with two electrodes, two 40 A tips and one 30 A tip, 30 A drag shield, deflector and air fitting, and Machine torch packages include corresponding automation kit

Spectrum® 875/875 Auto-Line™•Spectrum 875 Auto-Line model allows for any input voltage hook-up (208 – 575 V, single- or three-phase) with no manual linking, providing convenience in any job setting. Standard Spec-trum 875 model operates on 208/230 V, single-phase input voltage only. •Consumables storage compartment provides convenient access to consumables and parts.•Automatic air regulation compensates for input pressure variation to provide constant recom-mended torch pressure for optimum cutting performance •Includes Ultra-Quick Connect™ XT60 hand-held torch with ergonomic design and flexible cable; or XT60M long body or short body machine torch875 and 875 Auto-Line Comes Complete with: XT60 hand-held torch with 20 ft. (6 m) or 50 ft. (15.2 m) cable; OR XT60M long body or short body machine torch with 25 ft. (7.6 m) or 50 ft. (15.2 m) cable, Heavy-duty work clamp and flexible cable with quick connect, 10 ft. (3 m) power cord, Extra consumables, and Machine torch packages include corresponding automation kit

MILLER®

Plasma Cutter WeldersMLR/2779/2784

Model No.

Model No. Input Power Amps Input atRated Output

CompressorRequirementKVA KW Dimensions Net Weight

with TorchRated Output at 40°C (104°F)

Hand-Held Torch Packages Part No.

12 ft. (3.7 m) Long Body Short Body25 ft. (7.6 m) 50 ft. (15.2 m)

Machine Torch Packages Part No.

Long Body Short Body20 ft. (6.1 m) 50 ft. (15.2 m)Spectrum 375 XT 907529 — — — — — —Spectrum 625 XT 907579 907579001 — 907579002 907579003 — —Spectrum 875 — 907583 907583001 907583002 907583003 — —Spectrum 875 AL — 907584 907584001 907584002 907584003 907584005 907584004

Spectrum 375 X-TREME Single-phase 120 V (15 A): 20 A at 88 VDC, 35% duty cycle 18.1 2.2 2.1120– 240 VAC, 50/60 Hz 120 V (20 A): 27 A at 91 VDC, 20% duty cycle 25.6 3.1 3.0 240 V: 40 A at 140 VDC, 50% duty cycle 13.6 3.3 3.1Spectrum 625 X-TREME Single-phase 120 V (15 A): 20 A at 88 VDC, 35% duty cycle 18.1 2.2 2.1120– 240 VAC, 60 Hz 120 V (20 A): 27 A at 91 VDC, 20% duty cycle 25.6 3.0 2.9 240 V: 40 A at 140 VDC, 50% duty cycle 13.6 6.4 6.3Spectrum 875 Single-phase 208 V: 60 A at 140 VDC, 40% duty cycle 9.9 9.8208/230 VAC, 50/60 Hz 230 V: 60 A at 140 VDC, 50% duty cycleSpectrum 875 Auto-Line Three-phase 208 V: 60 A at 140 VDC, 40% duty cycle 9.9 9.4208– 575 VAC, 50/60 Hz 230– 380 V: 60 A at 140 VDC, 50% duty cycle 380– 575 V: 60 A at 140 VDC, 60% duty cycle 380– 575 V: 50 A at 140 VDC, 100% duty cycle Single-phase 208 V: 60 A at 140 VDC, 40% duty cycle 9.9 9.7 230 V: 60 A at 140 VDC, 50% duty cycle 230 V: 50 A at 140 VDC, 100% duty cycle

Rated Cutting Capacity375 XT: Steel/ Stainless - 3/8” (9.5 mm) Aluminum - 1/4” (6.4 mm)625 XT: Steel/ Stainless - 5/8” (15.9 mm)* Aluminum - 3/8” (9.5 mm)875/875 AL: Steel/ Stainless - 7/8” (22.2 mm) Aluminum - 5/8” (15.9 mm)*Stainless: 1/2” (12.7 mm) for Spectrum 625 X-TREME.AUTOMATION KITS

Converts hand-held torch packages to add machine torch capabilities. Machine torches are NOT included in automation kits and must be ordered separately.Part No. 301158, Spectrum 625 X-TREME Automation Kit. Requires a Spectrum 625 X-TREME with Ultra-Quick Connect™ feature for unit to be converted for use with long or short body machine torches.Part No. 301156, Spectrum 875 Automation Kit.Part No. 301157, Spectrum 875 Auto-Line Automation Kit. Includes remote pendant control for manual on/off.

208 V: 47230 V: 42

208 V: 47.4230 V: 42.2

208 V: 27.5230 V: 25380 V: 15

460 V: 12.4575 V: 9.8

5.0 CFM(142 L/min.)

at 90 PSI(621 kPa)6.0 CFM

(170 L/min.)at 90 PSI(621 kPa)

6.75 CFM(191 L/min.)

at 90 PSI(621 kPa)

9”H x 5.5”W x 13.25”D(229 mm x 140 mm x

337 mm)

19 lb. (8.6 kg)

12 ft. 21 lb. (9.5 kg)20 ft. 23 lb. (10.5 kg)25 ft. 24 lb. (10.7 kg)

20 ft. 49 lb. (22.2 kg)50 ft. 58 lb. (26.3 kg)20 ft. 54 lb. (24.5 kg)25 ft. 56 lb. (25.4 kg)50 ft. 63 lb. (28.6 kg)

9”H x 5.5”W x 13.25”D(229 mm x 140 mm x

337 mm)13.5”H x 8.75”W x 18.5”D

(343 mm x 222 mm x 470 mm)

375 XT/625 XT 875/875 Auto-Line

Only 875 Auto-Line has 3-Phase capabilities.



MILLER®

Plasma Cutting AccessoriesMLR/2784

FLEXIBLE WORK CABLEWork cable with quick connect and heavy-duty clamp.Part No. 234838, 20 ft. (6.1 m) length.Part No. 234930, 50 ft. (15.2 m) length.

CABLE COVERSPart No. 239642, 20 ft. (6.1 m) length.Part No. 231867, 25 ft. (7.6 m) length.Part No. 231868, 50 ft. (15.2 m) length.

NO. 30B ECONOMY CART with CORD WRAPFor 875 and 875 Auto-Line. This economical running gear provides mobility, includes a cord wrap and extra storage space, and is angled for easy front panel access.Part No. 300511.

PLASMA CIRCLE-CUTTING GUIDES For XT30C, XT30, XT40 and XT60. Cut straight lines or circles up to 12” in diameter.Part No. 253055.

SUCTION/MAGNETIC PIVOT BASEAdd this to your cutting guide for conve-nient attachment to all flat surfaces. The extended arm accommodates holes up to 30” in diameter.Part No. 195979.

PLASMA STANDOFF ROLLER GUIDEHelps maintain recommended standoff distance to maximize cutting performance and improve tip life.Part No. 253054.

IN-LINE AIR FILTER KITFor 375 X-TREME, 625 X-TREME, 875, and875 Auto-Line. Mounts to back of the plasma cutter. Includes male and female 1/4” NPT quick-disconnect fittings and hose for easy on/off connec-tion. The replaceable filter element filters to .85 microns for removal of 99.9% of water, dirt and oil.Part No. 228926.Part No. 228928, Replace-able filter element.

RTI FILTER & BRACKETFor 875 and 875 Auto-Line. Dryer will remove water, dirt and oil as small as one micron with 99.9% efficiency. Can be mounted on plasma cutter or on wall. Install as close as possible to point of air consumption.Part No. 300491.

MVP™ PLUGSFor Spectrum 375 X-TREME, Millermatic 211 Auto-Set with MVP, Maxstar 150 models, Diversion 180, and Multimatic 200. Allows connection of machine to 115/120-volt or 230/240-volt receptacles without tools—just choose the plug that fits the receptacle.Part No. 219258, For power cable 6-50P(230/240 V, 50 A).Part No. 219261, For power cable 5-15P (115/120 V, 15 A).Part No. 219259, For power cable 5-20P (115/120 V, 20 A).

MVP™ ADAPTERSFor Spectrum 625 X-TREME. Allows connection of machine to 120 or 240-volt receptacles without tools—just choose the adapter cord that fits the receptacle.Part No. 254328, For connection to 6-50P receptacle (240 V, 50 A).Part No. 254330, For connection to 5-15P receptacle (120 V, 15 A).Part No. 254331, For connection to 5-20P receptacle (120 V, 20 A).

SPECTRUM PLASMA CUTTER HAND-HELD TORCHES•Robust tip front end design optimizes arc performance and tip life •New retaining cup design provides increased cutting visibility and quick turn for easy consumable change •Industry’s only true drag shield protects tip for long life and easy template cutting •Trigger guard protects against inadvertent arc initiation •80° handle provides natural arm and elbow positioning while cutting •No-slip grip for easy control and torch dexterity •Ergonomic design with unique thumb guide and finger grip contoursPart No. 249949, 12 ft. (3.7 m) XT30 for 375 X-TREME.Part No. 255685, 20 ft. (6.1 m) XT30 for 375 X-TREME.Part No. 260633, 12 ft. (3.7 m) XT40 with disconnect for 625 X-TREME.Part No. 260635, 20 ft. (6.1 m) XT40 with disconnect for 625 X-TREME.Part No. 249953, 20 ft. (6.1 m) XT60 for 875/875 Auto-Line.Part No. 249954, 50 ft. (15.2 m) XT60 for 875/875 Auto-Line.

XT30 CONSUMABLESPart No. 249926, Electrode.Part No. 249927, Tip.Part No. 249930, Drag Shield.Part No. 249931, Swirl Ring.Part No. 249932, Retaining Cup.Part No. 249933, Shield Deflector.Part No. 249969, O-Ring.XT40 CONSUMABLESPart No. 249928, Tip.Part No. 249931, Swirl Ring.Part No. 249932, Retaining Cup.Part No. 249933, Shield Deflector.Part No. 249934, Gouge Tip.Part No. 249936, Gouge Shield.Part No. 249937, Machine Shield.Part No. 249969, O-Ring.XT60 CONSUMABLESPart No. 262643, 40A Tip.Part No. 249929, 60A Tip.Part No. 249935, Gouge Tip.Part No. 256026, Electrode.Part No. 256027, Drag Shield.Part No. 256028, Swirl Ring.Part No. 256029, Retaining Cup.Part No. 256030, Deflector Shield.Part No. 256031, Gouging Shield.Part No. 263834, O-ring.Part No. 265226, Shield.

SPECTRUM PLASMA CUTTER MACHINE TORCHESFor Spectrum 625 X-TREMEPart No. 259305, 25 ft. (7.6 m) long body XT40M.Part No. 257462, 25 ft. (7.6 m) short body XT40M.

For Spectrum 875 and 875 Auto-LinePart No. 249955, 25 ft. (7.6 m) long body XT60M.Part No. 249956, 50 ft. (15.2 m) long body XT60M.Part No. 257464, 25 ft. (7.6 m) short body XT60M.

PLASMA TORCH CONSUMABLE KITSPart No. 253520, For XT30.Part No. 253521, For XT40.Part No. 256033, For XT60.

XT30/XT40

XT60


MILLER®

Gas Equipment - OutfitsMLR/2783

HEAVY DUTY CUTTING, WELDING & HEATING OUTFITSThese premium heavy-duty Oxy-fuel outfits include just about everything needed for your cutting, welding, brazing or heating project: •Heavy-duty Series 40 or medium-duty Series 30 highly accurate, brass regulators with corrosion-resistant gauges and shatter-resistant poly carbonate lenses •Heavy-duty torches •Torch-mount flashback arrestors for added safety (acetylene outfits only) •Long-lasting Graf-Tite® soft-seat cutting tips with in-tip gas mixing for added resistance to flashbacks •Lighter •Safety glasses •Tip cleaner •Operations manualAcetylene outfits include: 25 ft. (7.5 m) 1/4” (6 mm) twin hose and H743 torch-mount flashback arrestorsPropane/Propylene outfits include: 20 ft. (6.1 m) ¼” (6 mm) “T” grade hose and check valvesTypical applications: Heavy fabrication, construction, pipeline, maintenance/repair, rail and truck repair.

HEAVY-DUTY CUTTING OUTFITSHand cutting torch outfits are built for the toughest jobs and include: •SC229 nickel-plated cutting torch with a reversible cutting lever and an ease-on oxygen design for smooth starts and restarts. •Heavy-duty Series 40 or medium-duty Series 30 highly accurate, brass regulators with corrosion-resistant gauges and shatter-resistant poly carbonate lenses •Long-lasting Graf-Tite® soft-seat cutting tips with in-tip gas mixing for added resistance to flashbacks •Operations manualHBS outfits include: Hard Hat™ gauge/regulator guardsHBAS outfits include: 20 ft. (6.1 m) 3/16” (5 mm) twin hose, H743 torch-mount flashback arrestors, lighter, safety glasses, and tip cleaner Typical applications: Heavy fabrication, construction, shipyard, rail car, rail and truck repair.

MEDIUM DUTY CUTTING, WELDING & HEATING OUTFITSThese premium medium-duty Oxy-fuel outfits include just about everything needed for your cutting, welding, brazing or heating proj-ect: •Medium-duty Series 30 highly accurate, brass regulators with corrosion-resistant gauges and shatter-resistant poly carbonate lenses •Medium -duty torches •Torch-mount flashback arrestors for added safety (acetylene outfits only) •Long-lasting Graf-Tite® soft-seat cutting tips with in-tip gas mixing for added resistance to flashbacks •Lighter •Safety glasses •Tip cleaner •Operations manualAcetylene outfits include: 25 ft. (7.5 m) ¼” (6 mm) twin hose and H743 torch-mount flashback arrestorsPropane/Propylene outfits include: 20 ft. (6.1 m) ¼” (6 mm) “T” grade hose and check valvesTypical applications: Fabrication, farm and ranch, pipe, truck and auto, refrigeration, maintenance/repair.

Part No. Fuel Gas TorchHandle

CuttingAttachment

CuttingTip

Cutting Capacity WeldingTip

Welding Capacity HeatingTip

OxygenRegulator

Fuel GasRegulator

HBA-40510 Acetylene WH200A SC209 SC12-1SC12-2

up to 1¼" (32 mm) with tips incl.up to 8" (203 mm) with optional tips

SW205 up to 1/8" (3 mm) with tip incl.up to 1/2" (13 mm) with optional tips

ST602 40-175-540CGA 540

40-15-510CGA 510

HBA-40300 40-15-300CGA 300

HBA-30510 Acetylene WH200A SC209 SC12-1 up to 5/8" (16 mm) with tip incl.up to 8" (203 mm) with optional tips

SW205 up to 1/8" (3 mm) with tip incl.up to 1/2" (13 mm) with optional tips

ST602 30-100-540CGA 540

30-15-510CGA 510

HBA-30300 30-15-300CGA 300

HBA-30510LP Propane orNatural Gas

WH200A SC209 SC40-1 up to 5/8" (16 mm) with tip incl.up to 8" (203 mm) with optional tips

— — ST615 30-100-540CGA 540

30-50-510CGA 510

HBA-30510MP Propylene WH200A SC209 SC60-1 up to 5/8" (16 mm) with tip incl.up to 8" (203 mm) with optional tip

— — ST815


CuttingAttachment

CuttingTip Cutting Capacity Welding

Tip Welding Capacity HeatingTip

OxygenRegulator

Fuel GasRegulator

MBA-30510 Acetylene WH100 MC509 MC12-0 MC12-1

up to 5/8" (16 mm) with tips incl. up to 6" (152 mm) with optional tips

MW205 up to 1/8" (3 mm) with tip incl.up to 3/8" (9.8 mm) with optional tips

MT603 30 series w/ 2" gauges30-100-540 CGA 540

30-15-510 CGA-510

MBA-30300 30-15-300 CGA-300

MBA-30510LP Propane or Natural Gas

MC40-1 up to 5/8"" (16 mm) with tip incl. up to 4"" (102 mm) with optional tips

- - MT805 30 series w/ 2" gauges 30-100-540 CGS 540

30-50-510 CGA 510MBA-30510MP MC60-1

Part No. Fuel Gas CuttingAttachment

CuttingTip

Cutting Capacity OxygenRegulator

Fuel GasRegulator

HBS-H510S Acetylene SC229 SC12-2 up to 1-1/4" (32 mm) with tips incl.up to 12" (305 mm) with optional tips

40 series w/ 2.5" gauges40-175-540S CGA 540"

40-15-510S CGA-510

HBS-H300S 40-15-300S CGA-300

HBAS-30510 Acetylene SC229 SC12-1 up to 5/8" (16 mm) with tip incl.up to 12" (305 mm) with optional tips

30 series w/ 2" gauges30-100-540 CGA 540"

30-15-510 CGA-510

HBAS-30300 30-15-300 CGA-300


MILLER®

Gas Equipment - OutfitsMLR/2783

Toughcut™ DUTY CUTTING, WELDING & HEATING OUTFITSVersatile Toughcut outfits include many feature found on more expensive outfits: •Medium-duty Series 30 highly accurate, brass regulators with corrosion-resistant gauges and shatter-resistant poly carbonate lenses •Medium -duty torches •20 ft. (6.1 m) 3/16” (5 mm) twin hose •Check valves for added safety •Long-lasting Graf-Tite® soft-seat cutting tips with in-tip gas mixing for added resistance to flashbacks •Lighter •Safety glasses •Operations manualTypical applications: Fabrication, farm and ranch, pipe, hobby, auto, refrigeration, maintenance/repair.

Versa-Torch™ PORTABLE OUTFITOne of the most versatile systems on the market, the Versa-Torch outfit includes: •lightweight nickel-plated torch handle and cut-ting attachment •Rugged, high-density polyethylene carrier •12.5 ft. (3.8 m) 3/16” (5 mm) twin hose •regulator-mount safety check valves •”R” 20-cu.-ft. oxygen and “MC” 10-cu.-ft. acetylene cylinders •AT60 tip tube •13716 heating head •Lighter •Safety glasses •Operations manualTypical applications: manufacturing, maintenance/repair, air conditioning, refrigeration, plumbing, metal fabrication, jewelry, metal sculpture and many others.

COMBINATION TORCH & TIP PACKAGESThese premium combination kits are available with cutting, welding and heating tips or with multiple cutting tips. Torches may be used with alternate fuel gases and tips designed for alternate fuel. Included: •Heavy-duty or medium-duty torch •H743 Torch-mount flashback arrestors for added safety (acetylene outfits only) •Long-lasting Graf-Tite® soft-seat cutting tips with in-tip gas mixing for added resistance to flashbacksTypical applications: Heavy fabrication, construction, pipeline, maintenance/repair, rail and truck repair.


CuttingAttachment

CuttingTip Cutting Capacity Welding

Tip Welding Capacity HeatingTip

OxygenRegulator

Fuel GasRegulator

MB55A-510 Acetylene CW5A CC509P MC12-1 up to 5/8" (16 mm) with tips incl.up to 6" (152 mm) with optional tips

MW205 up to 1/8" (3 mm) with tip incl.up to 3/8" (9.8 mm) with optional tips

MT603 30 series w/ 2" gauges30-100-540 CGA 540

30-15-510 CGA-510"

MB55A-300 30-15-300 CGA-300


CuttingAttachment

CuttingTip Cutting Capacity Brazing

Tip Brazing Capacity OxygenRegulator

Fuel GasRegulator

VT-4T Acetylene AW1A AC309 MC12-00 up to 36/16" (5 mm) with tips incl. LT103 LT104 LT106

1/2 - 3/4" (12-19 mm) 5/8 - 1" (16-25 mm) 3/4 - 1-1/2" (19-38 mm)"

30 series w/ 2" gauges 30-100-540 CGA 540"

"30-15-200 CGA-200

Part No. Fuel Gas Torch

HandleCutting

AttachmentCutting

Tip Cutting Capacity WeldingTip Welding Capacity Heating Tip

(Avg BTU/Hr.16206 (Heavy-duty)

Acetylene WH200A SC209 SC12-1 up to 5/8"" (16 mm) with tip incl. up to 8"" (203 mm) with optional tips

SW203 up to 5/64" (1.9 mm) with tip incl. up to 1/2" (13 mm) with optional tips

ST602 (40,000)

16205 (Medium-duty)

Acetylene WH100 MC209 MC12-1 up to 5/8" (16 mm) with tip incl. up to 6" (153 mm) with optional tips

MW203 up to 5/64" (1.9 mm) with tip incl. up to 3/8" (9.8 mm) with optional tips

MT603 (40,000)

16280 (Heavy-duty)

Acetylene WH200A SC209 SC12-0 SC12-1

up to 5/8" (16 mm) with tip incl. up to 8" (203 mm) with optional tips

- - -

16281 (Medium-duty)

Acetylene WH100 MC509 MC12-0 MC12-1


- - -

16280LP (Heavy-duty)

Propane WH200A SC209 SC40-0 SC40-1

up to 5/8"" (16 mm) with tip incl. up to 8" (203 mm) with optional tips

- - -

16281LP (Medium-duty)

Propane WH100 MC509 MC40-0 MC40-1


- - -

16206

16281


MILLER®

Gas Equipment - TorchesMLR/2783

HEAVY-DUTY TORCH HANDLEHeavy-duty handle allows high gas flow for large cutting tips and heating tips. Heavy-duty handles have replaceable hose connections. ”B”-size inlet connections are 9/16”-18. WH200A torch handle is covered by Miller's lifetime warranty when used with authentic Miller | Smith tips.Compatible Cutting Attachments: SC209, SC205, SC509Compatible Tips: Welding: SW200 Series; Heating: ST600 and ST800 SeriesLength: 7.5” (191 mm)Weight: 1.01 lb. (0.46 kg)Handle Diameter: 1” (25.4 mm)Valve Assembly Replacement: G729-5A (also for SW1A, SW1B and WH200)Part No. WH200A.

MEDIUM-DUTY TORCH HANDLEEasy handling, high-quality mid-size torch handle. Handles all but the highest volume heating and heaviest welding needs.Features rugged silver-brazed construction, forged brass butt and precision machined brass head. Stainless steel ball-type valves reduce uneven valve wear and provide easy flame adjustment. ”B”-size inlet connections are 9/16”-18 right and left hand. WH100 torch handle is covered by Miller's lifetime warranty when used with authentic Miller | Smith tips.Compatible Cutting Attachments: MC505 and MC509Compatible Tips: Welding: MW400 Series; Heating: MT800 SeriesLength: 7” (178 mm)Weight: 0.86 lb. (0.39 kg)Handle Diameter: 15/16” (24 mm)Valve Assembly Replacement: LW17 (also for MW5 and MW5A)Part No. WH100.

HEAVY-DUTY CUTTING ATTACHMENTSCuts up to 8” (203 mm) thick steel. Solid silver-brazed con-struction. Features o-ring seating and easy-to-change slip-inGraf-Tite® cutting tips with cost-saving soft seats. Use with any industrial fuel gases — acetylene, propane, natural gas, propyl-ene, hydrogen, and many others. Several models of standard and special-purpose tips are available for use in SC200 Series cutting attachments. SC200 series torch handles are covered by Miller's lifetime warranty when used with authentic Miller | Smith tips.Compatible Handle: WH200ACompatible Tips: SC SeriesLength: 12.5” (318 mm)Weight: 1.83 lb. (0.83 kg)Part No. SC205, 75° Head angle.Part No. SC209, 90° Head angle.

Standard-Duty Airline™ TORCH HANDLESpecially designed to handle standard-duty welding, brazing, cutting and fabricating. Light weight and compact size provide easy handling, even in confined areas. Needle valves located at front end for easy one-hand flame adjustment. ”A”-size inlet connections are 3/8”-24 right and left hand. AW1A torch handle is covered by Miller's lifetime warranty when used with authentic Miller | Smith tips.Compatible Cutting Attachments: AC309Compatible Tips: Welding: AW200 Series; Heating: AT600 Series; Twin Flame Tips: AT600 and AT600X6Length: 5.75” (146 mm)Weight: 0.37 lb. (0.17 kg)Handle Diameter: 11/16” (17 mm)Valve Assembly Replacement: AW11APart No. AW1A.

Length: 17” (432 mm)Weight: 2.6 lb. (1.18 kg)Part No. SC175, 75° Head angle.Part No. SC179, 90° Head angle.

Length: 20.5” (521 mm) except SC220 21” (533 mm) for SC220Weight: 2.7 lb. (1.22 kg)Part No. SC225, 75° Head angle.Part No. SC225S, 75° Head angle. Thick-walled.Part No. SC229, 90° Head angle.Part No. SC229S, 90° Head angle. Thick-walled.Part No. SC220, 180° Head angle.

Length: 36” (914 mm)Weight: 3.3 lb. (1.5 kg)Part No. SC365, 75° Head angle.Part No. SC369, 90° Head angle.Part No. SC360, 180° Head angle.

SC SERIES HAND CUTTING TORCHESCuts up to 12” (305 mm) thick steel. Features sintered metal inlet filters, o-ring seating and easy-to-change slip-in Graf-Tite® cutting tips with cost-saving soft seats. Super-tough, thick-wall brass forged heads reduce warping and distortion. SC225S and SC229S have even thicker-walled heads for more severe service and applications. Use with any industrial fuel gases — acety-lene, propane, natural gas, propylene, hydrogen, and many others. Several models of standard and special purpose tips are available for use in SC Series cutting torches. Cutting torches are covered by Miller's lifetime warranty when used with authentic Miller | Smith tips.Compatible Cutting Tips: Acetylene: SC12-00 thru SC12-6, SC56-1 thru SC56-5; Propane and Propane-Based: SC40-0 thru SC40-4, SC46-2 thru SC46-6, SC50-00 thru SC50-6; Propylene: SC60-0 thru SC60-6, SC36-1 thru SC36-6; SC Series Special-Purpose Tips

MEDIUM-DUTY CUTTING ATTACHMENTSPopular medium-duty cutting attachment easily cuts up to 6”(153 mm) steel. Solidly constructed to last a lifetime — silver-brazed joints, stainless steel tubes, brass forged butt and head.This torch has the same quality features and construction as the larger and heavier Miller | Smith cutting attachments. Use with any industrial fuel gases — acetylene, propane, butane, natural gas, propylene, hydrogen and many others. MC500 series torch handles are covered by Miller's lifetime warranty when used with authentic Miller | Smith tips.Compatible Handle: WH100 and MW5Compatible Tips: MC Series*Length: 11.25” (286 mm)Weight: 1.1 lb. (0.5 kg)Part No. MC505, 75° Head angle.Part No. MC509, 90° Head angle.

STANDARD-DUTY Airline™ CUTTING ATTACHMENTSSmall, lightweight cutting attachment with cutting capacity up to 3” thick (76 mm) steel. This torch has the same quality construction and features built into each Miller | Smith cutting attachment. AC309 torch handle is covered by Miller's lifetime warranty when used with authentic Miller | Smith tips.Compatible Handle: AW1ACompatible Tips: MC Series (except #MC12-5)Length: 8.5” (216 mm)Weight: 1 lb. (0.44 kg)Part No. AC309, 90° Head angle.

Gas Axe™ HAND CUTTING TORCHESGas Axe™ extra-heavy-duty torches are 100% tested and inspected, and are ideal for scrap and demolition cutting.Safety engineered; designed for severe applications. Excellent for use with propane or natural gas. Works with all gases including propane/propylene-based fuels, natural gas and acetylene. Extra-high-capacity cuts up to 24” (610 mm) with acetylene. Cuts up to 20” (508 mm) with propane.Compatible Cutting Tips: Acetylene: SC12-00 thru SC12-6, SC56-1 thru SC56-9; Propane and Propane-Based: SC40-0 thru SC40-4, SC46-2 thru SC46-6, SC50-00 thru SC50-9; Propylene: SC60-0 thru SC60-6, SC36-1 thru SC36-6; Special-Purpose Tips: SC2-2, SC2-4Recommended High-Flow Regulators: Oxygen: 40-175-540 or 40-275-540 (Cylinder), 46-175 (Manifold); LP Gas: 40-50-510 (Cylinder), 46-50 (Manifold)

Part No. Head Angle in Degrees

LengthInches (mm)

SC929 90 21 (533)SC935 75 36 (914)SC939 90SC930 180SC945 75 48 (1,219)SC949 90SC940 180SC965 75 72 (1,829)SC969 90SC960 180

*MC12 Series not compatible with #MC505.

SC205MC509

SC929

SC175

SC220

SC369


MILLER®

Gas Equipment - RegulatorsMLR/2783

HEAVY-DUTY SINGLE-STAGE REGULATORS - Series 40™Brass construction for dependable service in corrosive atmospheres.Series 40 single-stage regulators comprise a complete line of versatile regulators for welding, cutting, heating and other industrial applications. Heavy-duty construction and simplified design provide high gas flow and longer trouble-free operation. Stainless steel diaphragm allows use with liquid gases.

MEDIUM-DUTY SINGLE-STAGE REGULATORS - Series 30™Rugged medium-duty industrial-grade regulators.Series 30 single-stage regulators are extremely durable and contain our exclusive Sure Seat™ filtered seat technology for extended seat and regulator life. Filtered seats prevent contamination from entering the seating area, reducing repair costs and downtime. These highly accurate regulators are manufactured with a rugged forged body, corrosion-resistant bright nickel-plated bonnet and a highly durable neoprene composite diaphragm.

TWO-STAGE REGULATORS - Series 30™Series 30 two-stage regulators drop cylinder pressure to working pressure in two stages for consistent and accurate outlet pressure and flow regardless of inlet pressure. Recommended where outlet pressure and flow must be maintained without variation.

SINGLE-STAGE STATION REGULATORS - Series 46™ (HEAVY-DUTY) & Series 36™ (MEDIUM-DUTY)Series 46 and Series 36 brass line regulators are rugged, accurate and corrosion-resistant with shatter-resistant polycarbonate gauge lenses. The Series 46 regulators feature a stainless steel diaphragm and 2.5” (64 mm) gauges while the Series 36 has a neoprene composite diaphragm and 2” (51 mm) gauges.

Series 30™ SINGLE-STAGE REGULATOR TWIN PACKS

Part No.

Part No.

Part No.

Part No.

DeliveryPressure

DeliveryPressure

DeliveryPressure

DeliveryPressure

InletConnection

InletConnection

InletConnection

InletConnection

Max InletPressure

Max InletPressure

Max InletPressure

UL Listed Max InletPressure

OutletConnection

OutletConnection

OutletConnection

OutletConnection

Gas

Gas

Gas

Gas

Gauges (2.5”/64 mm)

Gauges (2”/51 mm)

Gauges (2”/51 mm)

Gauges DiameterInches (mm)

Inlet

Inlet

Inlet

Outlet

Outlet

Outlet

40-175-540 Oxygen 0–175 PSIG 4,000 PSIG 200 PSIG CGA 540 9/16”-18 RH 3,000 PSIG 0–12 Bar 276 Bar 14 Bar ”B” 207 Bar40-275-540 0–275 PSIG 400 PSIG 0–19 Bar 28 Bar40-15-300 Acetylene 0–15 PSIG 400 PSIG 30 PSIG CGA 300 9/16”-18 LH 400 PSIG 0–1 Bar 28 Bar 2 Bar ”B” 28 Bar40-15-510 CGA 51040-50-510 LP Gas (Propane, 0–50 PSIG 400 PSIG 60 PSIG CGA 510 9/16”-18 LH 400 PSIG Propylene or 0–3 Bar 28 Bar 4 Bar ”B” 28 Bar Natural Gas)40-275-580 Nitrogen 0–275 PSIG 4,000 PSIG 400 PSIG CGA 580 5/8”-18 RH 3,000 PSIG 0–19 Bar 276 Bar 28 Bar Internal 207 Bar

30-100-540 Oxygen 0–100 PSIG 4000 PSIG 150 PSIG CGA 540 9/16”-18 RH 3,000 PSIG 0–7 Bar 276 Bar 10 Bar ”B” 207 Bar30-20-540 0–20 PSIG 30 PSIG 0–1 Bar 2 Bar30-15-510 Acetylene 0–15 PSIG 400 PSIG 30 PSIG CGA 510 9/16”-18 LH 400 PSIG 0–1 Bar 28 Bar 2 Bar ”B” 28 Bar30-15-300 CGA 30030-15-520 CGA 52030-15-200 CGA 20030-50-510 LP Gas (Propane, 0–50 PSIG 400 PSIG 60 PSIG CGA 510 9/16”-18 LH 400 PSIG Propylene or 0–3 Bar 28 Bar 4 Bar ”B” 28 Bar Natural Gas)

35-125-540 Oxygen 0–125 PSIG 4,000 PSIG 150 PSIG CGA 540 9/16”-18 RH 3,000 PSIG 0–9 Bar 276 Bar 10 Bar ”B” 207 Bar35-15-510 Acetylene 0–15 PSIG 400 PSIG 30 PSIG CGA 510 9/16”-18 LH 400 PSIG 0–1 Bar 28 Bar 2 Bar ”B” 28 Bar35-50-580 Inert 0–50 PSIG 4,000 PSIG 60 PSIG CGA 580 5/8”-18 RH 3,000 PSIG 0–3 Bar 276 Bar 4 Bar Internal 207 Bar

46-175 Oxygen 0–175 PSIG 2.5 (64) CGA024 9/16”-18 RH ”B” 200 PSIG / 14 Bar36-150 0–12 Bar 2 (51) 500 PSIG / 35 Bar46-15 Acetylene 0–15 PSIG 2.5 (64) CGA025 9/16”-18 LH ”B” 100 PSIG / 7 Bar36-15 0–1 Bar 2 (51) 200 PSIG / 14 Bar 46-50 LP Gas 0–50 PSIG 2.5 (64) CGA025 9/16”-18 LH ”B” 100 PSIG / 7 Bar36-50 0–3 Bar 2 (51) 500 PSIG / 35 Bar

40-175-540

40-50-510

30-15-510

30-50-510

Part No. Gas Regulator Specs

HTP2 Oxygen 30-100-540 Delivery Pressure: 0–100 PSIG Inlet Connection: CGA 540 LP or Acetylene 30-15-510 Delivery Pressure: 0–15 PSIG Inlet Connection: CGA 510HTP5 Oxygen 30-100-540 Delivery Pressure: 0–100 PSIG Inlet Connection: CGA 540 Acetylene 30-15-300 Delivery Pressure: 0–15 PSIG Inlet Connection: CGA 300

•Solid brass industrial construction •Durable PTFE high-pressure seat •Convenient and economical •100% tested and inspected

35-125-540

46-15


MILLER®


THREE-STAGE NITROGEN LOW-PRESSURE BLANKETING REGULATORSThis preset regulator is specially designed to deliver a highly accurate and consistent low-pressure supply of nitrogen to oil-filled power transformers. Available with or without electronic pressure switch. The regulator will deliver and maintain 0.50 PSIG in the head space of oil-filled transformers. A built-in self-relieving valve set at 8 PSIG protects the system from over-pres-surization due to temperature variation. Both models come with rapid-fill bypass pressure valve allowing rapid filling of the transformer with 6 PSIG of pressure.Part No. 16391, Without pressure switch.Part No. 16347-3, With pressure switch.

Preset Outlet Pressure 1st Stage: 150 PSIG into 2nd stage 2nd Stage: 8 PSIG into 3rd stage 3rd Stage (delivery pressure): 0.4–0.6 PSIG into outletBypass Rapid Fill/Purge: 6 PSIGInlet Connection: CGA580Outlet Connection: 1/2” FNPTMax Inlet Pressure: 3,000 PSIG

HVAC/REFRIGERATION PURGE/LEAK TEST REGULATOROur single-stage nitrogen regulator is specially designed to meet the specifications of HVAC refrigerant purging applica-tions. This regulator is used with nitrogen to test HVAC systems to locate leaks and to purge an area for installation and repair. Its compact size is suitable for use where space is limited.•Economical and accurate•Solid brass body provides durability•Large durable nylon knob for easy pressure adjustment•Highly accurate 2-inch (51 mm) gauges with shatter-resistant lenses

PREMIUM FLOWMETER REGULATORS - Series 30™Rugged medium-duty industrial-grade regulators provide efficient and accurate regulation, and include our exclusive self-centering flowball. They are constructed with our exclusive Sure Seat™ filtered seat technology for extended seat and regulator life. Filtered seats prevent contamination from entering the seating area, reducing repair costs and downtime. Filtered seats also reduce CO2 freeze-up. Provides high argon flow capacity up to 80 SCFH.

ECONOMY FLOWMETER REGULATORS (SINGLE-STAGE)Exceptional value and compact design. Provides precise shielding gas regulation for MIG and TIG welding applications and more. Shatter-resistant polycarbonate flow tube is repositionable for easy reading and features triple-scale for argon, helium and argon/CO2. It has a packless o-ring flow tube seal which reduces maintenance and a built-in rupture disc reduces possibility of flow tube damage due to high-pressure inlet surge. Precision flow-adjustment valve allows easy adjustment to desired setting.Part No. H2051B-580Part No. H2051B-580H, Includes 6-ft. (1.8 m) hose with inert hose fittings.

Part No.

Part No.

DeliveryPressure

Gas

Gas

InletConnection

InletConnection

InletConnection

Preset DeliveryPressure

Preset DeliveryPressure

Flow Range

Flow Range

Max InletPressure

Max InletPressure

Max InletPressure

OutletConnection

OutletConnection

OutletConnection

Gas

Flowmeter No.

Gauges (2”/51 mm)Inlet Outlet

30-450-580 Nitrogen 0–450 PSIG 4,000 PSIG 600 PSIG CGA 580 7/16”-20 External 3,000 PSIG 0–31 Bar 276 Bar 41 Bar Flair Fitting 207 Bar

32-80-580 H1105 Argon, CO2 10-80 SCFH 80 PSIG CGA 580 5/8”-18 RH 3,000 PSIG 5–38 LPM 6 Bar Internal 207 Bar32-80-320 CO2 CGA 32032-30-580 H1240 Argon, CO2 10-60 SCFH 30 PSIG CGA 580 5/8”-18 RH 3,000 PSIG32-30-580-6* 5–28 LPM 2 Bar Internal 207 Bar Helium 20-190 SCFH 10–90 LPM General/ 0-10 Range Any Gas Scale35-30-320 H1240 CO2 10-80 SCFH 30 PSIG CGA 320 5/8”-18 RH 3,000 PSIG 5–38 LPM 2 Bar Internal 207 Bar

CO2 0-50 SCFH 50 PSIG CGA 580 5/8”-18 RH 3,000 PSIG 0–24 LPM 3 Bar G5/8”A-14 RH Internal 207 BarHelium 0-160 SCFH British fitting on 0–78 LPM H2051A-B9Argon, 0-60 SCFHArgon/CO2 Mix 0–28 LPM

*Includes 6 ft. x 1/4” inert gas hose.

16347-316391

35-30-320

32-80-580


MILLER®


DUAL FLOWMETER REGULATOR (SINGLE-STAGE)Dual flowmeter regulator has a back-pressure compensated flow tube with shatter-resistant polycarbonate cover. It is repositionable for easy reading and features triple scale for argon, helium and argon/CO2. Features include sensitive needle valve for fine adjustment and a 2” (51 mm) gauge.Part No. 33A-50-580.

FLOWMETERSPremium flowmeter models are designed to operate at inlet pressures of 80 PSIG (model H1105) and 30 PSIG (Selec-O-Gas model H1240). They can be attached to regulators or pipeline installations. Features include an extra-long flow tube made of shatter-resistant polycarbonate resin that is accurate to within five percent of the full scale reading. Flow tubes have a unique ball guide which centers the ball in the tube and keeps it centered (competitors use a ball floating in a non-centering tube which allows the ball to float off-center resulting in greater flows than the reading indicates). Our exclusive Selec-O-Gas™ flow tube has separate scales for argon, CO2, helium and general non-corrosive gas. Just rotate the outer tube to the scale you desire.

SINGLE-STAGE FLOW GAUGE REGULATORS - Series 30™Single-stage flow gauge regulators are compact and feature a forged brass body with 2” diameter gauges and a self-reseating pressure relief valve. They also include a Sure Seat™ protective inlet filter and a durable neoprene-composite diaphragm.

PREMIUM-QUALITY GAUGESPressure gauges (PSI/Bar) and flow gauges (CFH/LPM) have dual scale readings and are manufactured in accordance with our rigid quality standards. All gauges feature precision watch-type movements for optimum accuracy and 1/4-turn lens rings. They also feature one-piece shatter-resistant polycarbonate lenses with protective lips to prevent damage to the high-visibility cupped faces.

Brass Case Gauges (2.5”/64 mm)Part No. GA037-07, 400 PSI/28 BarPart No. GA043-07, 4000 PSI/280 Bar

Black Case Gauges (2”/51 mm)Part No. GA138-03, 400 PSI/28 BarPart No. GA139-03, 4000 PSI/280 BarPart No. GA145-03, 6000 PSI/400 Bar

Gas InletConnection

Preset DeliveryPressureFlow Range Max Inlet

PressureFlowmeterOutlet

ConnectionCO2 0-50 SCFH 50 PSIG CGA 580 5/8”-18 RH 3,000 PSIG H2230A 0–24 LPM 3 Bar Internal 207 BarHelium 0-160 SCFH 0–78 LPMArgon, 0-60 SCFHArgon/CO2 Mix 0–28 LPM

Part No. Description Gas Flow Range InletConnection

OutletConnection

RecommendedInlet Pressure

H1105* Heavy-Duty Argon, CO2 0-80 SCFH 0–38 LPM

1/4” NPT Male 5/8”-18 RH Internal

80 PSIG 6 Bar

H1240 Heavy-Duty(Select-O-Gas)

Argon, CO2, Helium, General

10-80 SCFH 5–38 LPM

1/4” NPT Male 5/8”-18 RH Internal

30 PSIG 2 Bar

H2230AH2231A

Standard-Duty(Multi-Scale)

CO2 0-50 SCFH 0–24 LPM

1/4” NPT Male on H2230

5/8”-18 RH Internal

50 PSIG 3 Bar

Helium 0-160 SCFH 0–78 LPM

5/8”-18 RH External on H2231

Argon, Argon/ CO2 Mix

0-60 SCFH 0–28 LPM

*H1105 supersedes H1103; H1240 supersedes H1230E.Note: When using argon/CO2 mix, read argon scale.

Part No. Flow Range Inlet

ConnectionMax InletPressure

OutletConnectionGas Gauges (2”/51 mm)

Inlet Outlet31-50-580 Argon 10-50 SCFH 0-4000 PSIG 10-50 SCFH CGA 580 5/8”-18 RH 3000 PSIG31-50-580-6* Internal 207 Bar31-50-320 CO2 CGA 320

Note: When using argon/CO2 mix, read argon scale.

H1105

GA138-03GA037-07


MILLER®

Gas Equipment - TipsMLR/2783

HEAVY-DUTY CUTTING TIPS - SC12 SERIESPreheat cutting tips for general hand and machine cutting. This series provides excellent preheat characteristics required for machine cutting.Compatible cutting attachments and torches:•SC200 attachments•All SC Series hand torches and machine torches

HEAVY-DUTY CUTTING TIPS - SC56 SERIES HEAVY PREHEATHeavy preheat cutting tips designed for cutting coated metals, heavy piercing, fast preheating and cutting thick steel sections up to 24”.Compatible cutting attachments and torches:•SC200 Series attachments•All SC hand torches•Two-hose machine torches (maximum size SC56-7)•Three-hose machine torch

HEAVY-DUTY CUTTING TIPS - SC36 SERIES RUGGED DUTYOne-piece cutting tips designed for cutting dirty or heavily coated metals. For rugged duty including scrapping, heavy construction, or where excessive reflected heat is present.Compatible cutting attachments and torches:•SC200 Series attachments•All SC Series hand torches and machine torches

HEAVY-DUTY CUTTING TIPS - SC40 SERIES (TWO-PIECE)Two-piece medium preheat cutting tips for general hand and machine cutting with propane, propane-based fuel gases and natural gas.Compatible cutting attachments and torches:•All SC Series cutting attachments, hand torches and machine torches

HEAVY-DUTY CUTTING TIPS - SC50 SERIES HEAVY PREHEAT (TWO-PIECE)Heavy preheat two-piece cutting tip series for hand and machine cutting up to 20-inch thick steel.Compatible cutting attachments and torches:•SC200 Series attachments•All SC Series hand torches•Two-hose machine torches•Three-hose machine torch

Part No.

Part No.

Part No.Part No.

Part No.

Consumption (SCFH)

Consumption (SCFH)

Consumption (SCFH)Consumption (SCFH)

Oxygen/PropaneConsumption (SCFH)

Oxygen/Natural GasConsumption (SCFH)

Oxygen

Oxygen

OxygenOxygen

Oxygen Oxygen

AcetylenePreheat

AcetylenePreheat

PropylenePreheatFuel

Preheat

PropanePreheat

Natural GasPreheat

Cutting

Cutting

CuttingCutting

Cutting Cutting

Preheat

Preheat

PreheatPreheat

Preheat Preheat

Metal Thickness

Inches (mm)Metal

ThicknessInches (mm)

Metal Thickness

Inches (mm)Metal

ThicknessInches (mm)

Metal Thickness

Inches (mm)

Drill SizeCutting Jet


Drill SizeCutting JetDrill Size

Cutting Jet


SC12-00 3/16 (5) 24 7 6.5 68SC12-0 1/4 (6) 40 7.5 7 62SC12-0 3/8 (10) 50 7.5 7 62SC12-1 1/2 (13) 75 11 9.5 56SC12-1 5/8 (16) 85 11 9.5 56SC12-2 3/4 (19) 105 12 10.5 54SC12-2 1 (25) 115 12 10.5 54SC12-2 1¼ (32) 135 12 10.5 54SC12-3 1½ (38) 170 14 12 51SC12-3 2 (51) 180 14 12 51SC12-4 2½ (64) 240 15 13 45SC12-4 3 (76) 265 15 13 45SC12-4 4 (102) 315 16 14 45SC12-5 5 (127) 420 30 26 41SC12-5 6 (152) 485 30 26 41SC12-5 8 (203) 550 30 26 41SC12-6 10 (254) 750 32 28 32SC12-6 12 (305) 975 32 28 32

SC56-1 1/2 (13) 75 33 30 56SC56-1 5/8 (16) 85 33 30 56SC56-2 3/4 (19) 105 33 30 54SC56-2 1 (25) 115 33 30 54SC56-2 1¼ (32) 135 33 30 54SC56-3 1½ (38) 170 43 39 51SC56-3 2 (51) 180 50 45 51SC56-5 2 – 5 (127) 420 57 52 41SC56-5 6 (152) 485 66 60 41SC56-5 8 (203) 550 72 65 41SC56-7 8 – 14 (356) 1,250 110 100 28SC56-9 14 – 20 (508) 2,150 145 130 3SC56-9 24 (610) 2,600 175 160 3

SC36-1 1/2 (13) 75 70 15 56SC36-1 5/8 (16) 85 70 15 56SC36-2 3/4 (19) 105 70 15 54SC36-2 1 (25) 115 70 15 54SC36-2 1¼ (32) 135 70 15 54SC36-3 1½ (38) 170 70 15 51SC36-3 2 (51) 180 70 15 51SC36-4 2½ (64) 240 70 15 45SC36-4 3 (76) 265 70 15 45SC36-4 4 (102) 315 70 15 45SC36-6 10 (254) 750 105 22 32SC36-6 12 (305) 975 105 22 32

SC40-0 1/4 (6) 40 38 8 62SC40-0 3/8 (10) 50 38 8 62SC40-1 1/2 (13) 75 38 8 56SC40-1 5/8 (16) 85 38 8 56SC40-2 3/4 (19) 105 38 8 54SC40-2 1 (25) 115 38 8 54SC40-2 1¼ (32) 135 38 8 54SC40-3 1½ (38) 170 38 8 51SC40-3 2 (51) 180 38 8 51SC40-4 2½ (64) 240 65 15 45SC40-4 3 (76) 265 65 15 45SC40-4 4 (102) 315 65 15 45

SC50-00 3/16 (5) 24 47 13 24 58 36 68SC50-0 1/4 (6) 40 47 13 40 62 38 62SC50-0 3/8 (10) 50 47 13 50 62 38 62SC50-1 1/2 (13) 75 70 15 75 70 40 56SC50-1 5/8 (16) 85 70 15 85 70 40 56SC50-2 3/4 (19) 105 70 15 105 70 40 54SC50-2 1 (25) 115 70 15 115 70 40 54SC50-2 1¼ (32) 135 75 16 135 70 40 54SC50-3 1½ (38) 170 75 16 170 70 40 51SC50-3 2 (51) 180 75 16 180 70 40 51SC50-4 2½ (64) 240 75 16 240 75 45 45SC50-4 3 (76) 265 75 16 265 75 45 45SC50-4 4 (102) 315 80 17 315 75 45 45SC50-5 5 (127) 420 80 17 420 82 50 41SC50-5 6 (152) 485 80 17 485 82 50 41SC50-5 8 (203) 550 90 20 550 82 50 41SC50-6 10 (254) 750 230 50 750 120 75 32SC50-6 12 (305) 975 280 60 975 165 100 32SC50-7 14 (354) 1,250 330 62 1,250 200 120 28SC50-8 16 (406) 1,500 375 80 1,500 220 135 17SC50-8 18 (457) 1,800 400 85 1,800 250 150 17SC50-9 20 (508) 2,150 420 90 2,150 250 150 3

Acetylene

Propane orNatural Gas


Acetylene

Propylene


HEAVY-DUTY CUTTING TIPS - SC46 SERIES RUGGED DUTYOne-piece cutting tips designed for cutting dirty or heavily coated metals. For rugged duty including scrapping, heavy construction, or where excessive reflected heat is present.Compatible cutting attachments and torches:•SC200 Series attachments•All SC Series hand torches and machine torches

Part No.

Oxygen/PropaneConsumption (SCFH)

Oxygen/Natural GasConsumption (SCFH)

Oxygen OxygenPropanePreheat

Natural GasPreheatCutting CuttingPreheat Preheat

Metal Thickness

Inches (mm)Drill Size

Cutting Jet

SC46-2 3/4 (19) 105 70 15 105 70 41 56SC46-2 1 (25) 115 70 15 115 70 41 56SC46-2 1¼ (32) 135 70 15 135 70 41 56SC46-4 2½ (64) 240 70 15 240 70 41 56SC46-4 3 (76) 265 70 15 265 70 41 56SC46-4 4 (102) 315 70 15 315 70 41 56SC46-5 5 (127) 420 105 22 420 52 52 54SC46-5 6 (152) 485 105 22 485 52 52 54SC46-5 8 (203) 550 105 22 550 52 52 54SC46-6 10 (254) 750 105 22 750 52 52 54SC46-6 12 (305) 975 105 22 975 52 52 54

MILLER®


HEAVY-DUTY CUTTING TIPS - SC60 SERIES MEDIUM PREHEAT (TWO-PIECE)Two-piece medium preheat cutting tips designed to provide optimum performance with propyl-ene or propylene-based fuel gases.Compatible cutting attachments and torches:•SC200 Series attachments•All SC Series hand torches•Two-hose machine torches•Three-hose machine torch

ACETYLENE HEAVY-DUTY SPECIAL-PURPOSE TIPSExtra Long Cutting - SC12-4X9Tip for hard-to-reach areas. Size 4.Gouging - SC13-3 and SC13-5For edge preparation, removal of welds or gouging cracked metals.Rivet/Riser Cutting - SC14-3Cuts heads of bolts and rivets. It can also be used in 180° head cutting torch to cut out boiler tubes. Works equally well for cutting risers and bulk heads.Rivet Blowing and Metal Washing — SC15-2Quickly removes large quantities of metal. Heavy preheat primarily used as a rivet blowing tip, but can be used for stud removal, metal washing, gouging, veeing and groove cutting.Plate Cutting — SC17-0”Drag”-style step tip cuts thin sheet metal with absolute minimum burn over and plate warpage.Heating — SC83Delivers large volume of heat quickly for bending, straightening, shrinking, forming and other heating applications. It allows heating with a one-piece cutting torch. Not recommended for use with cutting attachments.Compatible cutting attachments and torches•SC200 Series attachments•All SC Series hand torches and machine torches

PROPANE OR NATURAL GAS/PROPYLENE HEAVY-DUTY SPECIAL-PURPOSE TIPSGeneral Gouging (Propane) - SC2-2 and SC2-4For removing old welds or cracks, veeing and groove cutting.Heavy-Duty Gouging - SC23-3 (Propane); SC23-3M (Propylene)For removing old welds or cracks, veeing and groove cutting.Heating (Propane) - SC112Provides lots of heat fast with economical LP gas and oxygen. Not recom-mended for use with cutting attachments.Compatible cutting attachments and torches•SC200 Series attachments•All SC Series hand torches and machine torches

Part No.

Consumption (SCFH)Oxygen Propylene

PreheatCutting Preheat

Metal Thickness

Inches (mm)Drill Size

Cutting Jet

SC60-0 3/8 (10) 35 35 10 62SC60-1 1/2 (13) 75 38 9 56SC60-1 5/8 (16) 85 38 9 56SC60-2 3/4 (19) 105 38 9 54SC60-2 1 (25) 115 38 9 54SC60-2 1¼ (32) 135 38 9 54SC60-3 1½ (38) 170 38 9 51SC60-3 2 (51) 180 38 9 51SC60-4 2½ (64) 240 58 15 45SC60-4 3 (76) 265 58 15 45SC60-4 4 (102) 315 58 15 45SC60-5 5 (127) 420 58 15 41SC60-5 6 (153) 485 58 15 41SC60-5 8 (203) 550 58 15 41SC60-6 10 (254) 750 58 15 32SC60-6 12 (305) 975 58 15 32

Part No.

Part No.

Part No.

Part No.

Purpose

Purpose

Purpose

Purpose

CapacityInches (mm)

CapacityInches (mm)

AverageBTU/Hour

AverageBTU/Hour

Consumption (SCFH)

Consumption (SCFH)

Consumption (SCFH)

Consumption (SCFH)

Oxygen

Oxygen

Oxygen

Oxygen

Acetylene

Fuel

Acetylene

Propane

SC12-4X9 Cutting 4 (102) 331 14SC13-3 Gouging 3/8 (10) wide 151 35 1/4 (6) deepSC13-5 Gouging 1/2 (13) wide 246 50 3/8 (10) deepSC14-3 Riser 1½ (38) rivets 190 20SC15-2 Washing 1/2 (13) wide 336 40 3/8 (10) deepSC17-0 Plate or Thin 3/8 (10) 55 4 Cutting

SC2-2 Gouging 5/16 (8) wide 389 53 1/8 (3) deepSC2-4 Gouging 3/8 (10) wide 564 53 1/4 (6) deepSC23-3 Gouging 3/8 (10) wide 174 31 1/4 (6) deepSC23-3M Gouging 1/4 (6) wide 174 31 3/8 (10) deep

SC83 Heating 83,000 58 52*

SC112 Heating 289,000 495 125*

*Two 350-cu.-ft. cylinders required.

*Two 100-lb. cylinders required.


Propylene

Acetylene

PropylenePropane orNatural Gas

SC12-4X9

SC13-3

SC14-3

SC15-2

SC17-0

SC83

SC2-2

SC112


MILLER®


MEDIUM & STANDARD-DUTY TIPS - MC12 SERIESSlip-in cutting tips for general medium-duty hand cutting. Use with medium pressure acetylene and oxygen.Compatible cutting attachments and torches:•MC509 and AC309 (AC309: maximum size MC12-4)

MEDIUM & STANDARD-DUTY TIPS - MC40 SERIES (TWO-PIECE)Two-piece medium preheat cutting tips for hand cutting with propane and propane-based fuel gases.Compatible cutting attachments and torches:•MC505, MC509, and AC309

MEDIUM & STANDARD-DUTY TIPS - MC60 SERIES (TWO-PIECE)Two-piece medium preheat cutting tips for hand cutting with propylene or propylene-based fuel gases.Compatible cutting attachments and torches:•MC505, MC509, and AC309

HEAVY-DUTY WELDING TIPS - SW200 SERIESThe SW200 Series is for general and heavy welding and brazing. Swaged construction provides greater heat concentration for improved ”puddle” control. Tips are bent to 63.5° angle.Compatible torch handles:•WH200AFuel gases: These tips may also be used for brazing with acetylene-based fuels and propylene-based fuel gases. When using these gases, select a tip two sizes larger than recommended for the same work as acetylene.

MEDIUM-DUTY WELDING TIP - MW411 SERIESGeneral-purpose medium-duty brazing tips designed specifically for use with propane or propane-based mixture fuel gases with oxygen. Used for brazing applications and casting platinum.Compatible torch handles:•WH100.

MEDIUM-DUTY WELDING TIPS - MW200 SERIESThe MW200 Series is for general purpose medium-duty welding which features our ”soft flame” for easier puddle control and better penetration. Tips are bent to 63.5° angle.Compatible torch handles:•WH100Fuel gases: These tips may also be used for brazing with acetylene-based fuels and propylene-based fuel gases. When using these gases, select a tip two sizes larger than recommended for the same work as acetylene.

Part No. Part No.

Part No.

Consumption (SCFH) Consumption (SCFH)

Consumption (SCFH)

Oxygen Oxygen

Oxygen

AcetylenePreheat

PropanePreheat

PropylenePreheat

Cutting Cutting

Cutting

Preheat Preheat

Preheat

Metal Thickness

Inches (mm)

Metal Thickness

Inches (mm)

Metal Thickness

Inches (mm)




MC12-00 1/8 (3) 30 7 6 68MC12-00 3/16 (5) 30 7 6 68MC12-0 1/4 (6) 40 7 6 62MC12-0 3/8 (10) 46 7 6 62MC12-1 1/2 (13) 75 9 7 55MC12-1 5/8 (16) 81 9 7 55MC12-2 3/4 (19) 107 11 9 54MC12-2 1 (25) 118 11 9 54MC12-3 1½ (38) 170 12 10 51MC12-3 2 (51) 181 12 10 51MC12-4 2½ (64) 249 14 12 45MC12-4 3 (76) 267 14 12 45MC12-4 4 (102) 320 15 13 45MC12-5 5 (127) 420 15 13 41MC12-5 6 (152) 485 15 13 41

MC40-00 3/16 (5) 24 35 7 68MC40-0 1/4 (6) 40 35 7 62MC40-0 3/8 (10) 46 35 7 62MC40-1 1/2 (13) 75 35 7 55MC40-1 5/8 (16) 81 35 7 55MC40-2 3/4 (19) 107 35 7 54MC40-2 1 (25) 118 35 7 54MC40-2 1¼ (32) 133 35 7 54MC40-3 1½ (38) 170 35 7 51MC40-3 2 (51) 181 35 7 51MC40-4 2½ (64) 249 35 7 51MC40-4 3 (76) 267 35 7 51MC40-4 4 (102) 320 35 7 51

MC60-1 1/2 (13) 75 26 7 55MC60-1 5/8 (16) 81 26 7 55MC60-2 3/4 (19) 107 26 7 54MC60-2 1 (25) 118 26 7 54MC60-2 1¼ (32) 133 26 7 54MC60-3 1½ (38) 170 42 11 51MC60-3 2 (51) 181 42 11 51MC60-4 2½ (64) 249 42 11 45MC60-4 3 (76) 267 42 11 45MC60-4 4 (102) 320 42 11 45

Part No.

Part No.

Part No.Consumption (SCFH)*

Consumption (SCFH)

Consumption (SCFH)*Oxygen

Oxygen

OxygenAcetylene

Fuel

AcetyleneWelding Capacity

Inches (mm)

Welding RangeInches (mm)

Welding CapacityInches (mm)Drill Size Drill Size

SW201 1/32 (0.7) 2.3 2.3 71SW203 5/64 (1.9) 3.2 3.2 67SW205 1/8 (3) 6 6 57SW207 3/16 (5) 12 12 54SW209 3/8 (10) 23 23 49SW210 1/2 (13) 36 36 44

MW411 1/2 - 5/8 (13 - 16) 51.9 13

MW201 1/32 (0.7) 2.3 2.3 71MW203 5/64 (1.9) 3.2 3.2 67MW205 1/8 (3) 6 6 57MW207 3/16 (5) 12 12 54MW209 3/8 (10) 23 23 49

*Consumption (SCFH: cubic feet per hour) figures represent the average volumes of gases consumed when acetylene is added until sooty smoke just disappears from the acetylene flame prior to opening the oxygen valve and adjusting to a neutral flame.


Part No. LW15, O-ring replacement (package of 25).Part No. MW15, O-ring replacement (package of 25).

Part No. MW15, O-ring replacement (package of 25).

Acetylene Propane

Propylene

Acetylene Acetylene



STANDARD-DUTY WELDING TIPS - AW200 Airline™ SERIESGeneral-purpose standard-duty welding/brazing tips. Shorter, lighter and easier to handle.Compatible torch handles:•AW1AFuel gases: These tips may also be used for brazing with acetylene-based fuels and propylene-based fuel gases. When using these gases, select a tip two sizes larger than recommended for the same work as acetylene.

HEAVY-DUTY HEATING TIPS - ST600 SERIESMulti-flame heating tips for our heavy-duty torch handles. Used for heat treating, bending, straighten-ing, pre-heating, brazing, shrinking, forming, etc. Heads are manufactured from solid copper.Compatible torch handles:•WH200A

MEDIUM-DUTY HEATING TIPS - MT600 SERIESVersatile multi-flame heating tips for the popular medium-duty torch handles. Used for general heating of metals, brazing, hard surfacing, etc. Heads are manufactured from solid copper.Compatible torch handles:•WH100

HEAVY-DUTY HEATING TIPS - ST800 SERIESMedium pressure oxy-propane or propane-based heating tips provide high heating performance with low-cost fuel gases including natural gas and propane-based gases.Compatible torch handles:•WH200A

Medium pressure oxy-propane or propane-based heating tips provide high heating performance with low-cost fuel gases including natural gas and propane-based gases.Compatible torch handles:•WH200A

Part No.

Part No.

Part No.

Part No.

Part No.

Consumption (SCFH)*

Consumption (SCFH)

Consumption (SCFH)

Consumption (SCFH)

Consumption (SCFH)

Oxygen

Oxygen

Oxygen

Oxygen

Oxygen

Acetylene

Acetylene

Acetylene

Fuel Gas

Fuel Gas

Welding CapacityInches (mm)

AverageBTU/Hour

AverageBTU/Hour

AverageBTU/Hour

AverageBTU/Hour

Overall LengthInches (mm)




Torch HeadNumber

Torch HeadNumber

Drill Size

Drill Size

Drill Size

350 Cu. Ft. FuelCylinders Required

350 Cu. Ft. FuelCylinders Required

AW201 Up to 1/32 (0.7) 2.3 2.3 71AW203 5/64 (1.9) 3.2 3.2 67AW205 1/8 (3) 6 6 57AW207 3/16 (5) 12 12 54AW209 3/8 (10) 23 23 49AW210 1/2 (13) 36 36 44

ST602 40,125 31 28 64 1 16 (406)ST603 71,750 55 50 56 1 16 (406)ST605 124,670 96 87 57 2 19 (483)ST610 194,890 150 136 54 3 19 (483)

MT603 40,125 31 28 64 1 10 (254)MT605 73,085 57 51 56 1 16 (406)MT610 128,970 100 90 57 2 18 (457)

ST800 58,000 107–108 22–24 15.5 (394) 16317 75,000 118–138 31–34ST815 273,000 390–655 120-235 16 (406) 4642ST825 830,000 580–1,500 225–525 31 (787) 4639

ST615 244,000 225–535 70–160 (propane) 16 (406) 1495 155,145 175–450 96–267 (natural gas) 280,000 235–430 100–160ST625 455,000 480–1000 140-280 (propane) 31.5 (800) 1504 313,950 390–785 200–450 (natural gas)ST635* 614,195 670–1580 185–480 (propane) 31.5 (800) 1499


Part No. AW15, O-ring replacement (package of 25).

MILLER®


*ST635 requires 3/8” (10 mm) I.D. hose and #40-50-510 propane cylinder regulator.

Acetylene

Acetylene

Acetylene

Propylene

Propylene


Propane

STANDARD-DUTY HEATING TIPS - AT605 SERIESHandy light-duty multi-flame tip for heating, brazing and applying hard facing metals. Uses medium pressure acetylene and oxygen. Heads are manufactured from solid copper.Compatible torch handles:•AW1A

Part No. Consumption (SCFH)Oxygen Acetylene

AverageBTU/Hour

Overall LengthInches (mm)Drill Size 200 Cu. Ft. Fuel

Cylinders RequiredAT605 41,550 32 29 64 1 10 (254)

Acetylene


MILLER®

Gas Equipment - Tips

Gas Equipment - Accessories

MLR/2783

MEDIUM-DUTY HEATING TIPS - MT800 SERIES & MT615Medium pressure oxy-propane or propane-based heating tips provide high heating performance with low-cost fuel gases including natural gas and propane-based gases.Compatible torch handles:•WH100

Part No. Consumption (SCFH)Oxygen Fuel Gas

AverageBTU/Hour


Torch HeadNumber

MT800 93,000 119–121 36–38 (propane) 12.5 (318) 16317 123,000 135–146 51–56MT805 208,000 206–230 80-100 (propane) 15 (381) 4642 280,000 242–270 120–135MT615 269,000 225–535 70–160 (propane) 15 (381) 1495 182,000 175–450 96–267 (natural gas) 280,000 235–430 100–160

GASAVER™Ideal for production brazing and welding applications, our GASAVER can help you realize huge savings by eliminating wasted gas during torch start-up/shut-down and between flame applications. Save time by eliminating repeated torch adjustment. GASAVER gives you a safe place to temporarily put your torch and is used by America’s largest production plants. Torch flame is automatically extinguished when torch is not in use. Simply pass torch over pilot flame to re-light.Part No. WDW100, is standard GASAVER for use with propylene gas and oxygen. Equipped with adjustable pilot light.Part No. WDW101, is GASAVER for general use with acetylene and oxygen. Can be installed in any convenient location on the line be-tween regulators and torch. The closer the torch, the greater the savings in oxygen and acetylene. Equipped with adjustable pilot light.Part No. WDW104, is standard GASAVER equipped with adjustable pilot light for use with propane or natural gas at 4 PSI or more.

WELDING HOSESIMPORTANT: ”R”-Grade welding hose is for use with acetylene only, as specified by the RMA-CGA Hose Standard. ”T”-Grade hose must be used with all other gases.CAUTION: Do not exceed the maximum working pressures (regulator setting) listed for the hoses during welding and cutting operations.Oxygen: (150 PSIG max.)Acetylene: (15 PSIG max.)Propane, propylene and all other fuel gases: (40 PSIG max.)

OXY ACCESSORIESPart No. NE135B, Two-Hose Manifold — oxygen ”B” connec-tionsPart No. NE136B, Two-Hose Manifold — fuel ”B” connectionsPart No. 16229, Circle Cutting Guide cuts from 5/8” to 12” diameter holes. Works with all SC and MC style cutting tips.

Part No.

Part No.

Twin Hoses (Two-In-One)

Single Hoses

Hose Type

Hose Type

Length

Length

ID Diameter

ID Diameter

ConnectionsTo Regulators

Connections

To Torches

For Use With

RL1131 ”R”-Grade 25 ft. (7.6 m) 1/4” (6 mm) R11 (Oxygen) R11 (Oxygen) R12 (Fuel) R12 (Fuel) 9/16”-18 (”B”) 9/16”-18 (”B”)RL921 12.5 ft. (3.8 m) 3/16” (5 mm) R13D (Oxygen) R13D (Oxygen) R14D (Fuel) R14D (Fuel) 9/16”-18 (”B”) 9/16”-18 (”B”)RL935 20 ft. (6.1 m) 3/16” (5 mm) RA921 12.5 ft. (3.8 m) 3/16” (5 mm) R13D (Oxygen) R13 (Oxygen) R14D (Fuel) R14 (Fuel) 9/16”-18 (”B”) 3/8”-24 (”A”)TRL1131 ”T”-Grade 20 ft. (6.1 m) 1/4” (6 mm) R11 (Oxygen) R11 (Oxygen) R12 (Fuel) R12 (Fuel) 9/16”-18 (”B”) 9/16”-18 (”B”)

RL121 ”R”-Grade 12.5 ft. (3.8 m) 3/16” (5 mm) 9/16”-18 LH (”B”) NE180 Handi-Heat torch7294-1 Black Hose 6 ft. (1.8 m) 1/4” (6 mm) 5/8”-18 RH Male Flow gauges and flowmeter regulators

PropylenePropane orNatural Gas

Hard Hat™ REGULATOR GUARDSProtect regulators from costly gauge replacement with our Hard Hat gauge guards. Promotes safety… designed to help prevent broken gauges which can lead to gas leaks. Time and cost savings… helps prevent costly equipment down time and expensive repairs.Part No. HB190, Made from rugged steel with a bright yellow, baked-enamel finish. Quickly and easily attaches to regulator. Fits Series 40™ brass regulators.Part No. H195, Formed from extremely tough, impact-resistant polycarbonate resin with a bright, safety-yellow finish. Fits Series 30™ single stage regulators.

REVERSE-FLOW CHECK VALVESReverse-flow check valves are an important part of any oxy-fuel system. Without check valves, reverse flow of oxygen and fuel gases can occur when a tip becomes clogged, or when one cylinder empties during use. This could allow the higher pres-sure gas to back up into the other hose and into the regulator, thereby creating conditions which could lead to a regulator explosion. Our reverse-flow check valves close automatically when outlet pressures drop below 1/2 PSIG, preventing reverse flow of gases.Part No. H698, Regulator Mount. Inlet Connection: 9/16”-18 LH and RH Internal; Outlet Connection: 9/16”-18 LH and RH External.Part No. H697, Torch Mount. Inlet Connection: 9/16”-18 LH and RH External; Outlet Connection: 9/16”-18 LH and RH Internal.

FLASHBACK ARRESTORS•May be used with acetylene, propane, propylene, hydrogen and natural gas •Built-in check valve prevents the reverse flow of gas •Requires no manual reset •Easy to install — attaches to standard ”B” fittings •High-quality brass construction, case is rugged and corrosion-resistant •Sintered stainless steel filter stops flashback firePart No. H753 Regulator Mount (for use with CGA ”B” male fitting).Part No. H743, Torch Mount (High Flow) (do NOT exceed 15 PSIG when using acetylene gas).

HB190

H195

RL1131

RL121

7294-1

NE135B

16229

H753

H697H698


MILLER®

Fume ExtractionMLR/2780

FILTAIR® 130•Portable high-vacuum weld fume extractors designed for use with accessories like nozzles and fume guns to collect weld fume particles at the source •Designed to capture weld fume •Unrivaled filtering performance. Designed to capture weld fume particles with a cleanable filter and safely deposit them in an integrated particle bin. •Less noise. Up to 70% quieter than some other extractors. Only 68.5 decibels at 5 ft. •Portable and compact. At only 46 pounds (21 kg) the vertical-shaped machine is easy to move around.Processes:•Stick (SMAW) • Flux-Cored (FCAW) • MIG (GMAW) • TIG (GTAW)Comes with:FilTek™ XL filter, 8 ft. collection hose, and 20 ft. power cordPart No. 300595, FILTAIR 130.Part No. 301267, Replacement Cleanable Filters.Part No. 300672, 17 ft. (5.2 m) Collection Hose.

FILTAIR® MWX SERIES•Powerful systems that easily move to the weld area. Disposable or cleanable filter models for multiple applications. •Designed to capture weld fume. The MERV 15 rating of FilTek XL filters provides superior filtering of up to 95% of weld fume particulate. •Class-leading suction power is Accu-Rated at the hood to better capture weld fumes and provide a cleaner environment •Supe-rior filters. Our FilTek XL filters are specifically designed for welding with a MERV 15 rating to outlast, out-filter, and outperform all the rest •Durable aluminum pre-assembled extraction arm with external adjustments for better airflow and longer lifeSelf-Cleaning Models Additional Features: •Unrivaled filtering performance. Designed to capture weld fume particles with a cleanable filter and safely deposit them in an integrated particle bin. •One-minute cleaning cycle operates with a push of a button on the control panel. Note: Compressed air required to operate cleaning mechanism. •Disposal drawer provides easy and con-venient access to empty out collected particles. Handle releases drawer allowing it to slide out. •Upgrade to self-cleaning models for high arc-on time, extracting from heavy fume processes, or when welding aluminum or galvanized materialsProcesses:•Stick (SMAW) • Flux-Cored (FCAW) • MIG (GMAW) • TIG (GTAW)Comes with:FilTek™ XL filter and Pre-assembled armPart No. 951510, MWX-S (Self-Cleaning Model) with 7-ft. standard arm.Part No. 951511, MWX-S (Self-Cleaning Model) with 10-ft. standard arm.Part No. 951512, MWX-S (Self-Cleaning Model) with 12-ft. standard arm.Part No. 951507, MWX-D (Disposable Filter) with 7-ft. standard arm.Part No. 951508, MWX-D (Disposable Filter) with 10-ft. standard arm.Part No. 951509, MWX-D (Disposable Filter) with 12-ft. standard arm.

FILTAIR® Capture 5•The capture zone redefined. Innovative, extended-capture fume extraction system designed specifically for welding. •Zone-Flow™ technology. Extends the capture area up to five feet versus 12–18” with conventional source capture arms. •Minimizes downtime with fewer fume extractor adjustments. With increased capture area, arm interactions are dramatically minimized. •Designed to capture weld fume. The MERV 15 rating of FilTek XL filters provides superior filtering of up to 95% of weld fume particulate. •Source capture is designed to draw weld fume away from the welder’s breathing zone and keep the facility cleanProcesses:•Stick (SMAW) • Flux-Cored (FCAW) • MIG (GMAW) • TIG (GTAW)Comes with:FilTek™ XL filter and Durable, easy-to-move, pre-assembled, aluminum extraction arm with toolless external adjustments for higher airflows and longer filter lifePart No. 951574, 460 V FILTAIR® Capture 5 with 10-ft. Extraction Arm.Part No. 951594, 575 V FILTAIR® Capture 5 with 10-ft. Extraction Arm.Part No. 951575, 460 V FILTAIR® Capture 5 with 12-ft. Extraction Arm.Part No. 951595, 575 V FILTAIR® Capture 5 with 12-ft. Extraction Arm.

Model

FilterMedia

Accu-Rated™ Airflow


ExtractionArm Dia. Sound Level Motor Input Power Dimensions Net Weight without Arm

Sound Level Sound Level Dimensions Net WeightMotor

FILTAIR 130 132 CFM (62 L/sec.) 68.5 dBA at 5 ft. (1.5 m) 1 HP 115 VAC, 1-phase, 60 Hz 46 lb. (21 kg) at 11 A

490 ft.2 875 CFM 8” Approximately 70 dBA 1 HP, 115 V, 1-phase, 60 Hz at 34.75”H x 31.75”W x 48”D MWX-S: 300 lb. (136 kg)(45.52 m2) (413 L/sec.) (203 mm) at 5 ft. (1.5 m) 3450 RPM approximately 11.9 A (883 mm x 806 mm x 1,219 mm) MWX-D: 238 lb. (108 kg)

23”H x 12”W x 12”D (584 mm x 305 mm x 305 mm)

REPLACEMENT FILTERSFilTek XL filters efficiently capture the smallest weld fume particles and offer superior filter life.Part No. 300540, Self-cleaning models.Part No. 300539, Disposable filter models.

HOOD LIGHT with ARC SENSORIlluminates the welding zone and enables the fume extractor to start automatically when welding begins.Part No. 300689.

Filter Media


Extraction Arm Diameter Sound Level Motor Input Power Dimensions Net Weight

452 ft.2 (42 m2)

900 CFM (425 L/sec.)

10” (254 mm) Approximately 77 dBA at 5 ft. (1.5 m)

3 HP, 3450 RPM

230 VAC, 1-phase, 60 Hz at 13.5 A460 VAC, 3-phase, 60 Hz at 3.7 A575 VAC, 3-phase, 60 Hz at 3.0 A

43”H x 36”W x 48”D (1,092 mm x 915 mm x 1,219 mm)

620 lb. (282 kg) with 12 ft. arm

Part No. 300977, SA-807 7-ft. pre-assembled extraction arm.Part No. 300978, SA-810 10-ft. pre-assembled extraction arm.Part No. 300979, SA-812 12-ft. pre-assembled extraction arm.

Part No. 301082, 10-ft. pre-assembled extraction arm.Part No. 301083, 12-ft. pre-assembled extraction arm.Part No. 301093, 460 V, 3-Phase Extractor Cart.Part No. 301154, 575 V, 3-Phase Extractor Cart.Part No. 301106, FilTek® XL Replacement Filter.

Part No. 300673, 34 ft. (10.4 m) Collection Hose.Part No. 300669, 11.8” (300 mm) width Magnetic Nozzle.Part No. 300668, Flexible Funnel Magnetic Nozzle.


Titanium Series™•Industrial helmets for the most extreme welding and grinding applications•Four operating modes: weld, cut, grind and X-mode (not avail-able on 1600/1600i models).•X-mode eliminates sunlight interference and low-amperage lens opening from obstructed sensors (not available on 1600/1600i models).•Silver shell reflects heat to keep helmet and user cool.•Aluminum heat shield protects analog lens in high-amperage applications.Part No. 256177, Titanium 9400i™.Part No. 256176, Titanium 9400™.Part No. 256175, Titanium 7300™.Part No. 255519, Titanium 1600i™.Part No. 245799, Titanium 1600™.

Digital Elite™ SERIES•Ultimate helmets PLUS four modes of digital versatility for most welding and cutting applications.•Four arc sensors and four modes: weld, cut, grind and X-mode.•X-mode eliminates sunlight interference and low-amperage lens opening from obstructed sensors.Part No. 259485, Vintage Roadster™.Part No. 257217, Inferno™.Part No. 256173, Camouflage.Part No. 257213, Black.Part No. 269273, Blue Flame.

Digital Performance™ SERIES•Mid-range helmets for most welding applications.Part No. 256160, ’64 Custom™.Part No. 256163, Camouflage.Part No. 256159, Black.

Digital Pro-Hobby™ SERIES•Ideal helmets for light-duty welding applications.Part No. 259486, Metalworks™.Part No. 256168, Red Flame.Part No. 256169, Camouflage.Part No. 256166, Black.

CLASSIC SERIES•Miller quality for the value-minded welder who wants an auto-darkening lens.•2-year warranty •FS#10 Flip-Up and VSi models feature integrated grinding shield plus VSi model adds X-mode •Designed with construction market in mindPart No. 263038, FS#10 Flip-Up.Part No. 231703, FS#10.Part No. 251292, Variable Shade.Part No. 260938, VSi™.

MP-10™ SERIES•Miller quality for the value-minded welder•Passive shade 10 lens •Upgradable to auto-darkening lensPart No. 238496, Inferno™.Part No. 238497, Black.

MILLER®

Welding ProtectionMLR/2782

Viewing Area 5.15 sq. in. 5.07 sq. in. 5.15 sq. in. 5.15 sq. in. 6.06 sq. in. 7.22 sq. in. 9.22 sq. in. 16 sq. in. 16 sq. in. 7.22 sq. in. 9.22 sq. in. 9.22 sq. in.Shades 10 10 8–12 8–13 8–13 Cut: 5–8 Cut: 5–8 10 10 Cut: 5–8 Cut: 5–8 Cut: 5–8 Weld: 8–13 Weld: 8–13 Weld: 8–13 Weld: 8–13 Weld: 8–13Modes Weld Weld Weld Weld/X-mode Weld/Grind Weld/Cut/ Weld/Cut/ N/A N/A Weld/Cut/ Weld/Cut/ Weld/Cut/ Grind Grind/X-mode X-mode/ X-mode/ X-mode External Grind External GrindIntegrated No Yes No Yes No No No No Yes No No YesGrind Shield Auto-on Yes Yes Yes Yes Yes Yes Yes N/A N/A Yes Yes YesSensors 2 2 2 3 2 3 4 N/A N/A 3 4 4TIG Rating 20 amps 20 amps 20 amps 5 amps/below 20 amps 5 amps 5 amps/below N/A N/A 5 amps/below 5 amps/below 5 amps/belowSwitching Speed 1/3,600 1/3,600 1/10,000 1/20,000 1/20,000 1/20,000 1/20,000 N/A N/A 1/20,000 1/20,000 1/20,000Digital Controls No No No No Yes Yes Yes No No Yes Yes YesPrem. Headgear No No No No Yes Yes Yes No No Yes Yes YesInfoTrack™ No No No No No No No No No Yes Yes YesWeight 16 oz. (454 g) 14 oz. (396 g) 16 oz. (454 g) 23 oz. (652 g) 16 oz. (454 g) 17 oz. (482 g) 18 oz. (510 g) 17 oz. (482 g) 22.5 oz. (638 g) 19 oz. (539 g) 20 oz. (567 g) 24 oz. (680 g)

ClassicSeries FS#10

FeaturesClassicSeries FS#10Flip-Up

ClassicSeries

VariableShade

ClassicSeriesVSi™

DigitalPro-Hobby

DigitalPerformance™

Digital Elite™

Titanium1600™

Titanium 1600i™

DigitalTitanium 7300™

DigitalTitanium9400™

DigitalTitanium9400i™

WELDING HELMET FEATURES•Digital controls easily allow welder to adjust shade, delay, and sensitivity. •Premium headgear features unsurpassed fit and durability. Provides exten-sive adjustability settings and a pivoting top for better fit and comfort.

•External grind on Titanium 7300 and 9400 helmets allows welder to switch to grind mode with the push of a button.•InfoTrack™ technology on Titanium helmets allows the lens to track arc time while under the hood. Includes a digital clock display with the ability to set an alarm or timer.


Digtal Pro-Hobby™ SERIES REPLACEMENT PARTS

MP-10™ SERIES REPLACEMENT PARTSCLASSIC SERIES REPLACEMENT PARTS

Description

Description

Analog

Part No.

Digital

Helmet shell, Black 231415 231415Helmet shell, Red Flame 231419 231419Helmet shell, Camouflage 231418 231418Helmet shell, Metalworks 260087 260087Inside lens cover (4¼” x 1¾”) (5-pkg) 231410 231410Auto-darkening lens assembly - 256467Gasket, front lens 231412 231412Front lens cover (4½” x 3¼”) (5-pkg) 231411 231411Front lens holder, Black, flat 231572 231572Front lens holder, Gray 231573 231573Front lens holder, Red 231574 231574Front lens holder, Camouflage 231576 231576Ratchet headgear assembly - 256174Adjustment angle/stop hardware kit 770248 256178Fabric headband 770249 770249Replacement o-rings for kits 079975 079975#770248 (5 per pkg) Comfort cushion 216336 -Battery tray, kit (left/right) - 256729Battery cover 231413 -

Helmet shell, Black 216331Helmet shell, Inferno 223454Inside lens cover (5¼” x 4½”) (5-pkg) 235628Filter plate 235630Gasket, front lens 216337Front lens cover (4-11/16” x 5-5/8”) 216326(5-pkg) Frame, lens holding 216335Spacer, lens holding (MP-10) 235629Adjustment angle/stop hardware kit 770248Fabric headband 770249Replacement o-rings for kits 079975#770 248 (5 per pkg) Comfort cushion 216336

Description FS#10 VS VSi™ FS#10

Flip-UpHelmet shell, Black 231415 231415 261824 231415Inside lens cover (4¼” x 2”) (5-pkg) - - - 770237Inside lens cover (4¼” x 1¾”) (5-pkg) 231410 231410 231410 -Auto-darkening lens assembly 231571 251293 261826 770226Gasket, Lens assembly (QR) - - 261827 -Gasket, front lens 231412 231412 - -Front lens cover (4¼” x 2”) (5-pkg) - - - 770237Front lens cover (4½” x 3¾”) (5-pkg) 231411 231411 - -Front lens cover (5¼” x 4½”) (5-pkg) - - 235628 -Front lens holder, Black, flat 231572 231572 261828 -Frame, lens holding - - - 261829Adjustment angle/stop hardware kit 770248 770248 770248 770248Fabric headband 770249 770249 770249 770249Replacement o-rings for kits 079975 079975 079975 079975#770248 (5 per pkg) Comfort cushion 216336 216336 216336 216336Battery cover - 231413 266781 -Lens, Grinding Shield (Clear) - - 245818 261830Clips, Retaining Grinding Shield - - 245819 -Clips, Visor Hinge (i-Series Shell) - - 255070 -Lens Tear-Off, Grind Shield (Clear) - - 254278 -

MILLER®


Titanium Series™ REPLACEMENT PARTS

Digital Elite™ SERIES REPLACEMENT PARTS

Digital Performance™ SERIES REPLACEMENT PARTS

Description

Description Description

Titanium 1600

Analog Analog

Titanium 1600i

Digital Digital

Titanium 7300 Titanium 9400 Titanium 9400iAnalog Analog AnalogDigital Digital Digital

Helmet shell, Titanium (QR) 243530 245820 243530 258601 243530 258601 245820 245820Inside lens cover (5¼” x 4½”) (5-pkg) 235628 235628 - - - - - -Inside lens cover (4¼” x 2”) (5-pkg) - - 770237 770237 - - - -Inside lens cover (4¼” x 2½”) (5-pkg) - - - - 216327 216327 216327 216327Auto-darkening lens assembly - - 245816 256358 245817 256359 245817 256360Filter plate 235630 235630 - - - - - -Gasket, Lens assembly (QR) 245813 245813 - 241977 241977 241977 241977 241977Front lens cover 216326 216326 216326 216326 216326 216326 216326 216326(4-11/16” x 5-5/8”) (5-pkg) Front lens holder, Titanium 243396 245815 243396 243396 243396 243396 245815 245815Ratchet headgear assembly - - - 256174 - 256174 - 256174Adjustment angle/stop hardware kit 770248 770248 770248 256178 770248 256178 770248 256178Fabric headband 770249 770249 770249 770249 770249 770249 770249 770249Replacement o-rings for kits 079975 079975 079975 079975 079975 079975 079975 079975#770248 (5 per pkg) Comfort cushion 216336 216336 216336 - 216336 - 216336 -Battery tray, kit (left/right) - - 216339 216339 216339 216339 216339 216339Lens, Grinding Shield (Clear) - 245818 - - - - 245818 245818Clips, Retaining Grinding Shield - 245819 - - - - 245819 245819Button, Replacement External Grind - - - 256179 - 256179 - -Clips, Visor Hinge (i-Series Shell) - 255070 - - - - 255070 255070Lens Tear-Off, Grind Shield (Clear) - 254278 - - - - 254278 254278Kit, Weld Shield Hinge - 269929 - - - - 269929 269929

Helmet shell,Black 216331 216331Helmet shell, Camouflage 227190 227190Helmet shell, Inferno 223454 223454Helmet shell, Blue Flame 269274 269274Inside lens cover (4¼” x 2½”) (5-pkg) 216327 216327Auto-darkening lens assembly - 256469Gasket, auto-darkening lens assy 234758 234758Gasket, Lens assembly (QR) 241977 241977Gasket, front lens 216337 216337Front lens cover (4-11/16” x 5-5/8”) 216326 216326(5-pkg) Front lens holder, Black, flat 241978 241978Frame, lens holding 216335 234759Ratchet headgear assembly - 256174Adjustment angle/stop hardware kit 770248 256178Fabric headband 770249 770249Replacement o-rings for kits 079975 079975#770248 (5 per pkg) Comfort cushion 216336 -Battery tray, kit (left/right) 216339 216339

Helmet shell, Black 232020 232020Helmet shell, Camouflage 241461 241461Helmet shell, Blue Rage 241459 241459Helmet shell, '64 Custom 250533 250533Inside lens cover (4¼” x 2”) (5-pkg) 770237 770237Auto-darkening lens assembly - 256468Gasket, front lens 232028 232028Front lens cover (4½” x 5½”) (5-pkg) 231921 231921Front lens holder, Black, flat 232030 232030Front lens holder, Blue 232033 232033Front lens holder, Camouflage 243395 243395Ratchet headgear assembly - 256174Adjustment angle/stop hardware kit 770248 256178Fabric headband 770249 770249Replacement o-rings for kits 079975 079975 #770248 (5 per pkg) Comfort cushion 216336 -Battery tray, kit (left/right) - 256730


MILLER®


Weld-Mask™ AUTO-DARKENING GOGGLES•Uniquely designed auto-darkening welding goggles with face shield and head cover provide alternative protection for specialized welding applications •Ideal for maintenance, repair, and installation •Compact design allows users to weld in spaces where access with traditional welding helmets is limited •Lightweight design virtually eliminates neck strain •Ideal alternative for cutting glasses for use with plasma cutters •Eye covering fits tightly to the face to block out light for precision welding in bright surroundings •Face shield and head cover provide coverage for UV/IR rays and applications with limited spatter •Goggles feature shades 5, 7, 9, 11, and 13 (light state shade 3)Part No. 267370.Part No. 267422, Guard, face.Part No. 267420, Cover, lens.Part No. 270053, Band, head.Part No. 267421, Cover, head front.

HELMET BIB•Attaches to bottom of the helmet with hook-and-loop fasteners for added neck coveragePart No. 253882.

HEADGEAR•Extensive adjustability settings and a pivoting top for better fit and comfort •Fits any helmet in the Arc Armor® linePart No. 256174.

HARD HAT ADAPTER•Compatible with Fibre Metal and MSA hats. Other brands may fit depending on size and shape.Part No. 213110, XL and XLi.Part No. 222003, All other Miller Series.

HELMET HOOK•Holds welding helmets, grinding shields or other helmets with a headgear. Silicone strap secures the helmet in placePart No. 251018.

2x4 AUTO-DARKENING LENS•Fits all 2x4-inch windows •Solar powered, two arc sensors•Light state shade 3 •Two-year warrantyPart No. 770660, Shade 8.Part No. 770659, Shade 9.Part No. 770226, Shade 10.

WELDING CAPS•Caps are reversible with a low, soft bill •Miller® logos designPart No. 258322, Size 7.Part No. 258323, Size 7⅛.Part No. 258325, Size 7¼.Part No. 258326, Size 7⅜.Part No. 258327, Size 7½.Part No. 258328, Size 7¾.

PROTECTION PAKSStarter PakIncludes #251 292 Classic VS helmet and Classic Cloth jacketPart No. 255848, Large.Part No. 255850, X-Large.Part No. 255851, 2X-Large.Performance PakIncludes #256 159 Performance helmet and Indura® Cloth jacketPart No. 240886, Large.Part No. 240887, X-Large.Part No. 240888, 2X-Large.

JOBSITE TOOL BAG•Over twenty separate pockets •Opening of 12” x 18.5” (305 x 470 mm)Part No. 228028.

SLOTTED HARD HAT ADAPTER•Compatible with most slotted hard hatsPart No. 259637.

Helmet and hat not included. Helmet and hat not included.


LEATHER JACKET•Top grain leather •Expandable leather strategically placed for optimal mobility •Flame-resistant inside cuff •Satin lined •Tapered, athletic cut

WeldX™ JACKET•Lightweight exclusive material with extreme flame-resistant properties •7-ounce WeldX front and flame-resistant navy cot-ton back •Vented back/extended rear tail •Zipper closure with hook-and-loop fastened flap •Chromium free

CLASSIC CLOTH JACKET•9-ounce flame-resistant navy cotton •Pre-shrunk fabric •Fold-in sleeve snaps •Finished hems and reinforced stitching

WeldX™ CAPE SLEEVES•7-ounce WeldX front and flame-resistant navy cotton back •Fold-in sleeve snaps •Allows for bib attachment (sold separately)

CLASSIC CLOTH CAPE SLEEVES•9-ounce flame-resistant navy cotton •Fold-in sleeve snaps •Allows for bib attachment (sold separately)

CLASSIC CLOTH LAB COAT•40” length •9-ounce flame-resistant navy cotton •Fold-in sleeve snaps •Finished hems and reinforced stitching

COMBO JACKET•Indura® flame-resistant cotton (flame resistance guaranteed for life of jacket) •Top grain leather •Allows for patented bib/apron attachment

Indura® CLOTH JACKET - MEN’S & WOMEN’S• Indura® flame-resistant cotton (flame resistance guaranteed for life of jacket) •Nomex® flame-resistant thread

MILLER®


WeldX™ APRON•35” length with accessible front pocket •Adjustable drawstring ensures a good fitPart No. 247134.

CLASSIC CLOTH APRON•35” length with acces-sible front pocket •Adjustable drawstring ensures a good fitPart No. 247149.

BIB/APRON•Attaches to Indura® Cloth and Combo Jackets with snaps across the chest as a bib or along the bottom as an apronPart No. 231125.

WeldX™ BIB•19” length •Attaches to cape sleevesPart No. 247133.

CLASSIC CLOTH BIB•19” length •Attaches to cape sleevesPart No. 247147.

WeldX™ SLEEVES•18” length •Fold-in sleeve snaps •One-handed cinch closurePart No. 247137.

CLASSIC CLOTH SLEEVES•18” length •Fold-in sleeve snaps •One-handed cinch closurePart No. 247148.

COMBO SLEEVES•Indura® flame-resistant cotton/top grain leather • 21” (533 mm) lengthPart No. 231096.

231088 Small231089 Medium231090 Large231091 X-Large231092 2X-Large231093 3X-Large231094 4X-Large231095 5X-Large





252000 Large252001 X-Large252002 2X-Large


258095 264379 Small258097 264380 Medium258098 264381 Large258099 264382 X-Large258100 264383 2X-Large258101 — 3X-Large258102 — 4X-Large258104 — 5X-Large

SizeSize

SizeSize

Size

Size

Size

Size

Part No.Part No.

Part No.Part No.

Part No.

Part No.

Part No.

Men'sPart No.

Women'sPart No.


MILLER®


PERFORMANCE WELDING GLOVESUnprecedented comfort and performance, redefining the welding glove industry. Three-dimensional pattern, select-grade leather and precision craftsmanship with unique design features for specific welding applications. Exceptional dexterity and flexibility.

CLASSIC WELDING GLOVESStandard fit and materials for the value-minded welder.

Extra Heavy-Duty MIG/Stick• An industry first! Silicone patches on back for heat and spatter protection •Multi-layered insulated palm and back •Dual-padded, pig grain palm for added comfortPart No. 263350, Large.Part No. 263351, X-Large.

Heavy-Duty MIG/Stick (Long Cuff)•Padded forearm for additional protection and comfort •Triple-layered insulated back •Strategically placed patches on pig grain palm and cow split back for extended glove lifePart No. 263342, X-Large.

Heavy-Duty MIG/Stick•Strategically placed patches on palm and back for extended glove life •Double-layered insulated palm and back •Pig grain leather palm provides extreme durability and protec-tionPart No. 263339, Large.Part No. 263340, X-Large.Part No. 269615, 2X-Large.

MIG/Stick•Dual-padded palm for added comfort •Wool back provides ultimate insulation •Cow split leather provides extreme durability and protectionPart No. 263343, Large.Part No. 263344, X-Large.Part No. 269616, 2X-Large.

MIG (Lined)•Dual-padded palm •Fleece insulated palm, foam insulated back •Cow grain palm, pig split back and goat grain inner fingers provide exceptional dexterity and comfortPart No. 263330, X-Small (Women’s).Part No. 263331, Small (Women’s).Part No. 263332, Medium.Part No. 263333, Large.Part No. 263334, X-Large.

Heavy-Duty MIG/Stick•Durable side-split cowhide •Aluminized insulation reflects radiant heat •Reinforced palm heightens support and durabilityPart No. 249193, Large.Part No. 249194, X-Large.

MIG (Long Cuff)•Extra long 9” cuff for increased forearm pro-tection •Durable side-split cowhide •Moisture-wicking cotton fleece liningPart No. 249198, X-Large.

MIG•Durable side-split cowhide •Moisture-wicking cotton fleece lining •Thumb reinforcement straps increase support and durabilityPart No. 249195, Large.Part No. 249196, X-Large.

TIG•Unlined pigskin palm offers superior dexterity and wear •Durable side-split cowhide •Rein-forced palm heightens support and durabilityPart No. 249199, Large.Part No. 249200, X-Large.

Work•Dual-padded palm for added durability •Fleece back provides ultimate insulation •Cow grain leather offers superior durability and abrasion resistancePart No. 266041, Medium.Part No. 266042, Large.Part No. 266043, X-Large.

Metalworker•Durable top grain leather and spandex back for enhanced durability and dexterity •Neoprene wrist with hook-and-loop closure increases fit and support •Padded, reinforced palm and thumb saddle for extended wearPart No. 251066, Medium.Part No. 251067, Large.Part No. 251068, X-Large.

MIG (Unlined)•Unlined palm for heightened feel and dexterity •Double-layer insulated back and dual-padded palm for added comfort •Cow grain palm, cow split back and goat grain inner fingers provide exceptional dexterity and comfortPart No. 263335, Medium.Part No. 263336, Large.Part No. 263337, X-Large.Part No. 269619, 2X-Large.

TIG•Completely unlined for heightened feel and dexterity •Triple-padded palm for added comfort •Goat grain leather offers superior flexibility and dexterityPart No. 263345, X-Small (Women’s).Part No. 263346, Small (Women’s).Part No. 263347, Medium.Part No. 263348, Large.Part No. 263349, X-Large.

TIG/Multitask•Dual-padded palm for added comfort •Wool back provides ultimate insulation •Goat grain leather offers superior flexibility and dexterityPart No. 263352, Small.Part No. 263353, Medium.Part No. 263354, Large.Part No. 263355, X-Large.


MILLER®

WorkstationsMLR/2781

S-Series ArcStation™•The S-Series is perfect for the welder who needs a tough workbench for the fab shop or the home garage. •Four S-Series models avail-able, depending on your needs: 30S (30 x 30 inch with solid tabletop), 30SX (30 x 30 inch with X-pattern tabletop), 60S (30 x 60 inch with solid tabletop), or 60SX (30 x 60 inch with X-pattern and solid tabletop combo) •SX model includes X-pattern tabletop for trouble-free clamping! •Durable 1/8” steel frame with cross bar and heavy-duty tabletops provide a sturdy area for welding or metalworking •Lower shelf provides a convenient place to store equipment, tools and raw materials •Adjustable leveling feet keep bench rock-steady •Customize with a wide range of handy accessories to make this the ultimate workbenchPart No. 951167, 30S. Part No. 951168, 30SX.Part No. 951169, 60S.Part No. 951170, 60SX. Part No. 951413, 60SX Fully Loaded. Includes 60SX workbench, X-clamps, Side shelf, Tool chest with ball-bearing slides, Interior shelf, Quick-remove vise, Weld curtain, Casters, Gun holder, Tool holder, and Clamp bar.Part No. 300613, 6” X-clampsPart No. 300850, 5” X-clampsPart No. 300680, Side shelfPart No. 300610, Tool chest with ball-bearing slidesPart No. 300679, Interior shelfPart No. 300611, 5” Quick-remove vise and mountPart No. 300612, Quick-remove Mount onlyPart No. 300685, 30S series Weld curtainPart No. 300686, 60S series Weld curtainPart No. 300849, CastersPart No. 300614, Convenience kit includes the following: Gun holder, Tool holder, and Clamp bar.

F-Series ArcStation™•When portability or space-savings is a concern, the F-Series ArcStation is your solution •Wheels, handle, and fold-up design make unit easy to take to the jobsite or move around the shop •Compact size makes storing unit a breeze. Unit folds down to 6” x 29” x 48” (152 x 737 x 1219 mm). •30” x 30” size tabletop provides plenty of work surface •3/16” X-pattern steel tabletop allows troublefree clamp-ing •1.5” diameter steel tube frame provides strength and durability •Includes removable gun holder •Add the optional 5” X-clamps (#300850) to make this the ultimate portable workbenchPart No. 300837, 30FX.Part No. 300850, 5” X-clamps.

Steel Top (1) 29 x 29 x 3/16” X-pattern (1) 29 x 29 x 3/16” solid (1) 29 x 29 x 3/8” X-pattern (2) 29 x 29 x 3/16” solid (1) 29 x 29 x 3/8” solid (1) 29 x 29 x 3/8” X-patternLoad Capacity 500 lb. (227 kg) 1,000 lb. (454 kg) 1,000 lb. (454 kg) 1,000 lb. (454 kg) 1,000 lb. (454 kg)Dimensions 35” x 29” x 35” 35” x 29” x 29” 35” x 29” x 29” 35” x 58” x 29” 35” x 58” x 29” (889 x 737 x 889 mm) (889 x 737 x 737 mm) (889 x 737 x 737 mm) (889 x 1,473 x 737 mm) (889 x 1,473 x 737 mm)Weight 74 lb. (34 kg) 123 lb. (56 kg) 177 lb. (80 kg) 230 lb. (104 kg) 318 lb. (144 kg)

Features 30FX 30S 30SX 60S 60SX60SX Fully Loaded


LINERS FOR Bernard™300, 400 & 500 Amp Best of the Best MIG Guns

Centerfire™ CONSUMABLE SERIES300, 400 & 500 Amp Best of the Best MIG Guns

Bernard™ AIR-COOLED MIG GUNS

15 ft. (4.57m)Part No.

15 ft. (4.57m)Part No.

Wire Size

Wire Size

Liner Colour

Gun Amperage

L1A-15 .023-.030" Yellow L3A-15* .035-.045" White L4A-15 .045-1/16" Red L6A-15 5/64-3/32" BlueL7A-15 3/32-7/64" Grey L8A-15 7/64 - 1/8" Black

1920343 .035 (.9 mm) 150A 600A Nylon 200A-600A Steel43115X 3/64 (1.2 mm) 200A-600A Nylon1920344 200A-600A Steel44215X 1/16 (1.6 mm) 200A-600A Nylon1920345 200A-600A Steel

Universal Conventional Liner

Aluminum/Soft Wire Liners

Small Centerfire™ Gas Diffusers and NozzlesPart No. T-023, .023” (0.6 mm) 'T' Series Tip.Part No. T-030, .030” (0.8 mm) 'T' Series Tip.Part No. T-035, .035” (0.9 mm) 'T' Series Tip.Part No. T-039, .039” (1.0 mm) 'T' Series Tip.Part No. T-045, .045” (1.2 mm) 'T' Series Tip.Part No. T-052, .052” (1.4 mm) 'T' Series Tip.Part No. T-062, 1/16” (1.6 mm) 'T' Series Tip.Part No. T-072, .072” (1.8 mm) 'T' Series Tip.Part No. T-078, 5/64” (2.0 mm) 'T' Series Tip.Part No. T-094, 3/32” (2.4 mm) 'T' Series Tip.Part No. T-109, 7/64” (2.8 mm) 'T' Series Tip.Part No. T-125, 1/8” (3.2 mm) 'T' Series Tip.Part No. NS-5800C, 5/8” I.D., Flush, Copper.Part No. NS-5818C, 5/8” I.D., 1/8” Rec., Copper.Part No. NS-5800B, 5/8” I.D., Flush, Brass.Part No. NS-5818B, 5/8” I.D., 1/8” Rec., Brass.Part No. NS-1218C, 1/2” I.D., 1/8” Rec., Copper.Part No. NS-1200B, 1/2” I.D., Flush, Brass.Part No. NS-1218B, 1/2” I.D., 1/8” Rec., Brass.Part No. NST-3800B, 3/8” I.D., Flush, Brass.Part No. NST-3818B, 3/8” I.D., 1/8” Rec., Brass.Part No. NST-38XTB, 3/8” I.D., 1/8” Extension, Brass.Part No. 4323R, Nozzle Insulator.Part No. DS-1, Gas Diffuser.Part No. NS-FLX, Self-Shielded Conversion Kit (Includes tip holder and both insulators).

Large Centerfire™ Gas Diffusers and NozzlesPart No. TT-023, .023” (0.6 mm) 'TT' Series Tapered Tip.Part No. TT-030, .030” (0.8 mm) 'TT' Series Tapered Tip.Part No. TT-052, .052” (1.4 mm) 'TT' Series Tapered Tip.Part No. TT-062, 1/16” (1.6 mm)'TT' Series Tapered Tip.Part No. TT-035, .035” (0.9 mm) 'TT' Series Tapered Tip.Part No. TT-045, .045” (1.2 mm) 'TT' Series Tapered Tip.Part No. TT-039, .039” (1.0 mm) 'TT' Series Tapered Tip.Part No. N-3400C, 3/4” I.D., Flush, Copper.Part No. N-3418C, 3/4” I.D., 1/8” Rec., Copper.Part No. N-3414C, 3/4” I.D., 1/4” Rec., Copper.Part No. N-3418B, 3/4” I.D., 1/8” Rec., Brass.Part No. N-5800C, 5/8” I.D., Flush, Copper.Part No. N-5818C, 5/8” I.D., 1/8” Rec., Copper.Part No. N-5814C, 5/8” I.D., 1/4” Rec., Copper.Part No. N-5818B, 5/8” I.D., 1/8” Rec., Brass.Part No. N-5814B, 5/8” I.D., 1/4” Rec., Brass.Part No. NT-3800C, 3/8” I.D., Flush, Copper.Part No. 10012, Insulator Nozzle.Part No. D-1, Gas Diffuser.

Part No. Amperage Cable Length Handle & Trigger Neck Contact Tip Wire Size Power Pin Liner

Q3015AE8CLC 300 amp

15 ft. (4.57 m) Standard Trigger B Series Small Curved Handle 45° Rotatable, Medium Centerfire

0.035” (0.9 mm) Lincoln

Universal Conventional Liner

Q3015AE8CMC 0.035” (0.9 mm) MillerQ3015AE8ELC 0.045” (1.2 mm) LincolnQ3015AE8EMC 0.045” (1.2 mm) MillerQ4015AE8CLC 400 amp 0.035” (0.9 mm) LincolnQ4015AE8CMC 0.035” (0.9 mm) MillerQ4015AE8ELC 0.045” (1.2 mm) LincolnQ4015AE8EMC 0.045” (1.2 mm) Miller

Bernard™ CONSUMABLESPart No. 4423R, Insulator Cap.Part No. QJL-2330, .023 - .030 Jump Liner.Part No. QJL-3545, .035 - .045 Jump Liner.Part No. QT2-60, Pipeworx Neck.Part No. QT3-45, Bernard Neck.

MILLER®

MIG Welding GunsMLR/2784


MIG WELDING GUNSMIGmatic™ M-Series guns are an ideal match for Miller® integrated MIG packages and other Miller wire feeders.

M-100 can be used on:•SideKick™•SideKick™ XL/Cricket® XL/Millermatic® 90•Millermatic® 130•Millermatic® 130 XP•Millermatic® 135/140s/175/180s/DVI™s /211•Millermatic® Challenger™•Millermatic® Challenger™ 172•Millermatic® Passport™/Passport™ Plus•Millermatic® 141•Millermatic® 190

M-150 can be used on:•SideKick™ XL/Cricket® XL/Millermatic® 90•Millermatic® 120/150•Millermatic® 130•Millermatic® 130 XP•Millermatic® 135/140s/175/180s/DVI™s /211•Millermatic® Challenger™•Millermatic® Challenger™ 172•Millermatic® 185•Millermatic® Pulser

M-25 can be used on:•Millermatic® 200•Millermatic® 210/212/250x/251/252•Millermatic® 250•Millermatic® Vintage•Millermatic® Reach Wire Feeder

M-100/M-150 SERVICE PARTS/CONSUMABLESPart No. 246372, Nozzle, slip type, .500 (12.7 mm) orf flush.Part No. 226190, Nozzle, slip type, flux cored.Part No. 087299, Tip, contact scr, .023 (0.6 mm) wire x 1.125.Part No. 000067, Tip, contact scr, .030 (0.8 mm) wire x 1.125.Part No. 000068, Tip, contact scr, .035 (0.9 mm) wire x 1.125.Part No. 000069, Tip, contact scr, .045 (1.2 mm) wire x 1.125.Part No. 194010, Kit, liner monocoil .023/.025 (0.6 mm) wire x 15 ft.Part No. 194011, Kit, liner monocoil .030 – .035 (0.8 – 0.9 mm) wire x 15 ft.Part No. 194012, Kit, liner monocoil .035 – .045 (0.9 –1.2 mm) wire x 15 ft.

M-10/M-15 SERVICE PARTS/CONSUMABLESPart No. 169715, Nozzle, slip type, .500 (12.7 mm) orf flush.Part No. 169716, Adapter, contact tip.

M-SERIES CONSUMABLE KITSTo better serve you, Miller has introduced six improved, affordable MIG consumable kits that are compatible with the M-Series guns. Each kit contains consumables that are specific to your welding application, including gun type and wire size.

Consumable kits contain 10 contact tips, nozzle, and contact tip adapter.Part No. 234607, M-10/15, M-100/150 Gun, .023” Wire.Part No. 234608, M-10/15, M-100/150 Gun, .030” Wire.Part No. 234609, M-10/15, M-100/150 Gun, .035” Wire.

Consumable kits contain 10 contact tips, nozzle, contact tip adapter, and nozzle adapter.Part No. 234610, M-25 Gun, .030” Wire.Part No. 234611, M-25 Gun, .035” Wire.Part No. 234612, M-25 Gun, .045” Wire.

Roughneck® SCREW-ON NOZZLESPart No. 209035, Copper, 3/8” orifice tapered.Part No. 207313, Copper, 5/8” orifice, 15/16” O.D.Part No. 199614, Brass, heavy duty 5/8” orifice.Part No. 199618, Copper, heavy duty 5/8” orifice.Part No. 199612, Brass heavy duty 3/4” orifice.Part No. 199617, Copper heavy duty 3/4” orifice.Part No. 199610, Brass standard 1/2” orifice.Part No. 199615, Copper standard 1/2” orifice.Part No. 209036, Copper, 1/2” orifice tapered.Part No. 199613, Brass, standard 5/8” orifice.Part No. 198855, Copper, standard 5/8” orifice.Part No. 199611, Brass, standard 3/4” orifice.Part No. 199616, Copper, standard 3/4” orifice.

M-25 SERVICE PARTS/CONSUMABLESPart No. 169724, Nozzle, slip type, .500 (12.7 mm) orf .125 recess.Part No. 169725, Nozzle, slip type, .625 (15.9 mm) orf .125 recess.Part No. 200258, Nozzle, slip type, .500 (12.7 mm) orf flush.Part No. 169726*, Nozzle, slip type, .625 (15.9 mm) orf flush.Part No. 169727, Nozzle, slip type, .625 (15.9 mm) orf .125 stickout.Part No. 172034, Tip, contact scr 3/64 (1.19 mm) wire x 1.125.Part No. 169728, Adapter, contact tip.Part No. 169729, Adapter, nozzle.Part No. 194010, Kit, liner monocoil .023/.025 (0.6 mm) wire x 15 ft.Part No. 194011, Kit, liner monocoil .030 – .035 (0.8 – 0.9 mm) wire x 15 f.Part No. 194012, Kit, liner monocoil .035 – .045 (0.9 – 1.2 mm) wire x 15 ft.Part No. 194014, Kit, liner monocoil 3/64 (1.19 mm) aluminum wire x 15 ft.

Model Part No. Length Wire SizeRating and Duty Cycle

(CO2)1

M-100 248282 10 ft (3 m) 100 A at 100% Duty Cycle .030 – .035” (0.8 – 0.9 mm)M-150 249039 10 ft (3 m) 150 A at 100% Duty Cycle .030 – .035” (0.8 – 0.9 mm) 249040 12 ft (3.7 m) 249041 15 ft (4.6 m)M-25 169594 10 ft (3 m) 250 A at 100% Duty Cycle .030 – .035” (0.8 – 0.9 mm) 169596 12 ft (3.7 m) 1948053 12 ft (3.7 m) 169598 15 ft (4.6 m) 169599 15 ft (4.6 m) 250 A at 100% Duty Cycle .035 – .045” (0.9 – 1.2 mm)

1 60% with mixed gases 3 #194805 is an M-25 gun with friction lugs for the Hobart Beta-MIG 2510.

OPTIONAL M-SERIES GUN NOZZLES & TIPSM-25 and M-40 Tapered NozzlesPart No. 176243, Nozzle, Tapered 3/8” (9.5 mm).Part No. 178386, Nozzle, Tapered 11/32” (8.7 mm).M-25 and M-40 Tapered Contact Tips (1/4” OD x 1.312”)Part No. 176797, Contact Tip, Tapered .030” (0.8 mm).Part No. 176793, Contact Tip, Tapered .035” (0.9 mm).Part No. 176794, Contact Tip, Tapered .045” (1.2 mm).M-25 and M-40 Heavy-Duty Spray Contact Tips (5/16” OD x 1.125”)Part No. 187117, Contact Tip, Heavy Duty .035” (0.9 mm).Part No. 187118, Contact Tip, Heavy Duty .045” (1.2 mm).

MILLER®


M-100

M-150

M-25


MILLER®


XR™ PUSH-PULL GUNS•XR-Aluma-Pro and XR-Pistol guns work in conjunction with XR-Controls, XR-AlumaFeed or select Millermatic machines to provide the best solution for push-pull applications •Threaded quick-change 360° rotatable head tubes are available in different bends and lengths for even those hard-to-reach welds. Over 30 different styles to fit your application and welder’s preference. •Wire tension settings (except XR-Pistol). 4000 or 5000- specific tension settings ensure the very best wire feeding performance and arc consistency •Heavy-duty construction. All internal compo-nents are designed to provide long lasting performance and feeding precisionXR- Aluma-Pro™ Lite: •Lightest weight gooseneck-style gun features rear trigger that allows access to hard-to-reach weldsXR-Aluma-Pro™: •Robust professional-grade gun has the highest duty cycle rating in its class. •Easy access to drive assembly and removable toolless head tube reduce service time, by allowing a simple means of changing drive rolls and head tube — or performing routine maintenance without disassembly of gunXR™-Pistol: •Reliable, cost-effective gun for light- to medium industrial applicationsXR™-Pistol-Pro: •Exceptional aluminum welding results for heavy-industrial applications •Most durable motor and drive design improves feedabil-ity and arc consistency while helping reduce downtime and maintenance costs •Easy access to drive assembly and removable toolless head tube reduce service time, by allowing a simple means of changing drive rolls and head tube — or performing routine maintenance without disassembly of gunProcesses:• MIG (GMAW) with aluminum wire (capable of other wires with optional hardwire kits) • Pulsed MIG (GMAW-P) with optional pulsing power source

XR™-Aluma-Pro™ CONSUMABLESPart No. 206186, .030-.035” (0.8-0.9 mm) FasTip Contact Tip.Part No. 206187, .035-.040” (0.9-1.0 mm) FasTip Contact Tip.Part No. 206188, .040-.045” (1.0-1.2 mm) FasTip Contact Tip.Part No. 206189, 3/64-.052” (1.2-1.3 mm) FasTip Contact Tip.Part No. 206190, 1/16” (1.6 mm) FasTip Contact Tip.Part No. 206191, 1/16-.068” (1.6-1.7 mm) FasTip Contact Tip.Part No. 209026, .030-.035” (0.8-0.9 mm) Tapered FasTip Contact Tip.Part No. 209027, .035-.045” (0.9-1.2 mm) Tapered FasTip Contact Tip.Part No. 209029, .052” (1.3 mm) Tapered FasTip Contact Tip.Part No. 229887, 15 ft (4.6 m) Cable Liner.Part No. 229891, 25 ft (7.6 m) Cable Liner.Part No. 233999, Long Cable Liner.Part No. 233998, Short Cable Liner.Part No. 227158, Head Tube ShortPart No. 229672, Head Tube LongPart No. 227159, Insulating Jacket, short.Part No. 229673, Insulating Jacket, long.Part No. 227161, 4” (102 mm) Teflon Air-Cooled Head Tube Liner Short Barrel, .030” (0.8 mm) to .035” (0.9 mm).Part No. 230239, 4” (102 mm) Teflon Air-Cooled Head Tube Liner Short Barrel, .047” (1.2 mm) to .062” (1.6 mm).Part No. 229674, 6” (152 mm) Teflon Air/Water Cooled Head Tube Liner Long Barrel, .030” (0.8 mm) to .035” (0.9 mm).Part No. 229431, 6” (152 mm) Teflon Air/Water Cooled Head Tube Liner Long Barrel, .047” (1.2 mm) to .062” (1.6 mm).Part No. 227408, Inlet Guide.Part No. 227416, Insulator Ring Rear.Part No. 227434, Drive Roll.Part No. 227439, .035” (0.9 mm) to .052” (1.3 mm) Idler Roll.Part No. 230710, .062” (1.6 mm) Idler Roll.Part No. 231519, Air-Cooled Assembly Kit Short Barrel, 4” (102 mm).Part No. 231518, Air-Cooled Assembly Kit Long Barrel, 6” (152 mm).

XR™-Pistol Pro CONSUMABLESAir-cooled parts breakdown shown.Part No. 255716, Kit, Head Tube Assy (Air) AP/PP 180° 4”.Part No. 198855, Nozzle, Copper 5/8”.Part No. 206189, Tip, Fastip .312 Od .052 And 3/64 Al Wires.Part No. 229670, Diffuser, .281/.312 Od Collar Fastip 1/8 Rec Aluma.Part No. 232284, Insulator, Nozzle Collared.Part No. 227168, Nut, Head Tube Rotation.Part No. M1273, Liner, Teflon .047-.062 Wire Pistol Pro.Part No. 230969, Kit, Replacement O-Rings Head Tube Air.

XR™-Pistol Pro Plus CONSUMABLESAir-cooled parts breakdown shown.Part No. 258474, Kit, Head Tube Assy (Air) AP/PP 180 Degree 4” Lg Cntrfr.Part No. N-5818C, Nozzle, C-Fire Large Copper 5/8” Recess 1/8”.Part No. T-047AL, Contact Tip, Centerfire .047 Aluminum.Part No. D-1AP, Diffuser, Centerfire-D-1AP.Part No. 232284, Insulator, Nozzle Collared Diffuser (For 180°/ Straight Only).Part No. 227168, Nut, Head Tube Rotation.Part No. 230969, Kit, Replacement - Rings Head Tube Air.Part No. M1442, Liner, Teflon .047-.062 Wire Soft Pro/Plus.Part No. 227408, Inlet Guide.Part No. 227416, Insulator Ring Rear.Part No. 227434, Drive Roll.Part No. 229673, Insulating Jacket, long.Part No. T-035AL, Centerfire Contact Tip, Aluminum .035.

XR™-Aluma-Pro Plus™ CONSUMABLESPart No. 229887, 15 ft (4.6 m) Cable Liner.Part No. 229891, 25 ft (7.6 m) Cable Liner.Part No. 233999, Long Cable Liner.Part No. 233998, Short Cable Liner.

XR™-Aluma-Pro LITE CONSUMABLESPart No. 254477, Head Tube Assembly.Part No. 258541, Kit, Jump Liner Assy .030-.035 (5 pk).Part No. 258542, Kit, Jump Liner Assy .047-.062 (5 pk).Part No. 258726, Kit, Jump Liner Assy .030-.035 14” Long (5 pk).Part No. 258727, Kit, Jump Liner Assy .047-.062 14” Long (5 pk).Part No. QT2-45, Tube, Body 45° x 2.69 Large.Part No. T-035AL, Centerfire Contact Tip, Aluminum .035.Part No. T-047AL, Contact Tip, Centerfire .047 Aluminum.

SUGGESTED POWER SOURCES•Millermatic® 252 •Millermatic® 350P/350P AluminumThese power sources require XR-AlumaFeed or XR-Control •Deltaweld® Series •Invision™ MPa •AlumaPower™ MPa •XMT® Series (except VS model) •Trailblazer® Series

Model No.15-ft. (4.6 m) 25-ft. (7.6 m) 30-ft. (9 m)

Gun & Cable LengthPart No.

35-ft. (10.6 m)Dimensions

Net Weight (Gun only)

XR-Aluma-Pro Lite — 300948 — — 175 A at 60% duty cycle 70–900 IPM Aluminum 2.0 lb. (0.9 kg)(Air-cooled) (1.8–23 m/min.) .030 –.047” (0.8–1.2 mm)XR-Aluma-Pro 300000 300001 — 300264 300 A at 100% duty cycle 70–900 IPM Aluminum 2.5 lb. (1.1 kg)(Air-cooled) 300264002* (1.8–23 m/min.) .030 –.052” (0.8–1.3 mm)XR-Aluma-Pro 300003 300004 — 300265 400 A at 100% duty cycle 70–900 IPM Aluminum 2.9 lb. (1.3 kg)(Water-cooled) (1.8–23 m/min.) .030 –.052” (0.8–1.3 mm)XR-Pistol 198127 — 198128 — 200 A at 100% duty cycle 70–875 IPM Aluminum 2.2 lb. (1 kg)(Air-cooled) (1.8–22.2 m/min.) .030 –1/16” (0.8–1.6 mm)XR-Pistol 198129 — 198130 — 400 A at 100% duty cycle 70–875 IPM Aluminum 2.4 lb. (1.1 kg)(Water-cooled) (1.8–22.2 m/min.) .030 –1/16” (0.8–1.6 mm)XR-Pistol-Pro 300782 300783 — 300784 200 A at 100% duty cycle 70–900 IPM Aluminum 2.2 lb. (1 kg)(Air-cooled) (1.8–23 m/min.) .030 –.052” (0.8–1.3 mm)XR-Pistol-Pro 300786 300787 — 300788 400 A at 100% duty cycle 70–900 IPM Aluminum 2.4 lb. (1.1 kg)(Water-cooled) (1.8–23 m/min.) .030 –.052” (0.8–1.3 mm)

Welding Current Rating Wire Feed Speed


4”H x 1.9”W x 15”L (102 mm x 48 mm x

381 mm)5”H x 2.5”W x 17”L (127 mm x 64 mm x 432 mm)

7.4”H x 1.9”W x 10.6”L (187 mm x 48 mm x 270 mm)

*Comes with remote.

XR-Aluma-Pro Lite XR-Aluma-Pro and all Pistol models


XR-Aluma-Pro

XR-Pistol-Pro


MILLER®

MIG Spool GunsMLR/2784

Spoolmatic® SPOOL GUNS •Portable, aluminum wire feed system for industrial applications •Integrated spool canister rotates 180° for operator flexibility and comfort •Available in 15 or 30 ft. cable lengths, providing flexibility to be used in the shop and in the field •Two-stage trigger with built-in gas valve allows for gas preflow, and eliminates the need to purge long gas lines •Wire feed speed adjustment on the gun handle and reversible drive rolls save time and money •Quick-change, single-turn contact tip provides excellent performance and is easy to replace

Spoolmatic•Cost-effective, industrial aluminum spool gun.Processes:• MIG (GMAW) with aluminum and other soft alloy wires •MIG (GMAW) with hard wires • Pulsed MIG (GMAW-P) with optional pulsing power sourcePart No. 195156, 15 ft. (4.5 m) cable.Part No. 130831, 30 ft. (9 m) cable.Part No. 137546, WC-115A.Part No. 137546-01-1, WC-115A (with contactor).Part No. 137549, WC-24.

Spoolmatic Pro•The most reliable, easy-to-use spool gun in the industry for the professional welder •Wire tension settings. 4000 or 5000-spe-cific tension settings ensure the very best wire feeding performance and arc consistency •Most durable motor and drive design improves feedability and arc consistency while helping reduce downtime and maintenance costs •Easy access to drive assembly and removable toolless head tube reduce service time, by allowing a simple means of changing drive rolls and head tube — or performing routine maintenance without disassembly of gun •Easy-to-rotate, self-seating head tube allows for better access into tight spots, preventing leaks and providing excellent current transfer. Head tubes are common with the XR-Aluma-Pro gooseneck-style guns. •Head tube options in several different lengths and bend configurations are available for use when a standard head tube doesn’t fit the applicationProcesses:• MIG (GMAW) with aluminum and other soft alloy wires •MIG (GMAW) with hard wires • Pulsed MIG (GMAW-P) with optional pulsing power sourcePart No. 301147, 15 ft. (4.5 m) cable.Part No. 301148, 30 ft. (9 m) cable.Part No. 137546, WC-115A.Part No. 137546-01-1, WC-115A (with contactor).Part No. 137549, WC-24.

Model No. Dimensions Net Weight withGun only

Spoolmatic 200 A at 100% duty cycle 70– 875 IPM Aluminum* .030 –1/16” (0.8 –1.6 mm) 4” (102 mm) 10.25”H x 2.5”W x 2.9 lb. (1.3 kg) (1.8 – 22.2 m/min.)* Hard Wire .030 –.045” (0.8 –1.1 mm) 15.2”L (260 mm x 64 mm x 384 mm) Spoolmatic 200 A at 100% duty cycle 70– 900 IPM Aluminum* .030 –1/16” (0.8 –1.6 mm) 4” (102 mm) 10.75”H x 2.5”W x 3.0 lb. (1.4 kg) Pro (1.8 – 23 m/min.)* Hard Wire .030 –.045” (0.8 –1.1 mm) 15.4”L (273 mm x 64 mm x 390 mm)

Welding Current Rating Wire Feed Speed Maximum Spool Size Capacity


*Wire speed dependent on control or Millermatic used

SUGGESTED POWER SOURCES•Millermatic® 212 Auto-Set™ •Millermatic® 252 •Millermatic® 350P/350P Aluminum (except Spoolmatic Pro) •Shopmate™ 300 DX •Bobcat™ Series — with SGA 100C controlThese power sources require WC-24 control (#137549) •CP-302 •Deltaweld® Series •Invision™ MPa •AlumaPower™ MPa •Dimension™ Series XMT® Series (except VS model) •Trailblazer® Series



MILLER®

MIG Spool GunsMLR/2784

Spoolmate™ SPOOL GUNS•Reliable and economical spool guns designed for home hobbyists and light fabricators.

Spoolmate 100•For use with Millermatic 141, 190 and 211, Multimatic 200 and Syncrowave 210 TIG/MIG Complete •Light industrial gun for 4043 series aluminum wire rated at 135 amps at 30% duty cycle •12 ft. direct-connect cable with heavy-duty strain relief provides extended reach and accessibility to your work •Dual V-knurled drive rolls with adjustable tension control for consistent feeding of different types of wire •Clear spool canister protects the wire and allows you to easily see the spool •Includes carrying case, extra contact tips and nozzleProcesses:• MIG (GMAW) with aluminum and other soft alloy wires • MIG (GMAW) with hard wiresPart No. 300371.Part No. 111400, Hose, SAE .187” ID x .410” OD x 8 ft.Part No. 186404, Gun Tube Assembly.Part No. 186405, Nozzle.

Spoolmate 200•For use with Millermatic 212 and 252 models •Light industrial gun for 4000 or 5000 series aluminum wire rated at 160 amps at 60 percent duty cycle •20 ft. weld/control cables with strain relief and sheath provide extended reach and accessibility to your work •Wire feed speed adjustment on the gun —not the machine—for easy setup •Easy access to drive assembly and drive rolls •Two-stage trigger with built-in gas valve allows for gas preflow and postflow •Toolless head tube removal for easy replacement •Three optional head tubesProcesses:• MIG (GMAW) with aluminum and other soft alloy wires • MIG (GMAW) with hard wiresPart No. 300497.Part No. 300591, 45° Head Tube. Part No. 300592, 9” Extension Head Tube. Part No. 300593, Heavy-Duty Head Tube.Part No. 195287, Spoolmatic Adaptor Cable. Allows connec-tion to older Millermatic 210 and 212 (non-Auto-Set).Part No. 243385, Gun Tube Assembly.Part No. 243390, Contact AdapterPart No. 186405, Nozzle.

Spoolmate 3035•For use with vintage Millermatic tapped voltage 210 and 212 models. Use with current Millermatic and Bobcat 225 models requires an SGA 100 or 100C control. •Light industrial gun for 4000 or 5000 series aluminum wire rated at 150 amps at 60% duty cycle •20 ft. weld/control cables with strain relief and sheath provide extended reach and accessibility to your work •Light weight and well balanced for operator comfort •Clear spool canister protects the wire and allows you to easily see the spool •Easy-to-remove barrel assemblyProcesses:• MIG (GMAW) with aluminum and other soft alloy wires • MIG (GMAW) with hard wiresPart No. 195016.Part No. 043856, SGA 100.Part No. 043857, SGA 100C.Part No. 195375, Heavy-Duty Head Tube.Part No. 196827, Gun Tube Assembly.Part No. 196848, Contact Adapter.Part No. 197570, Anti-Rotation Pin.

Model No. Dimensions Net Weight withCable Assembly

Spoolmate 135 A at 30% duty cycle 5– 625 IPM Aluminum .030 –.035” (0.8 – 0.9 mm) 4” (102 mm) 11.5”H x 3”W x 6 lb. (2.7 kg) 100 (1.7–15.9 m/min.)* Solid Steel .023 –.035” (0.6 – 0.9 mm) 13”L (291 mm x (9 lb. (4.1 kg) Stainless .023 –.035” (0.6 – 0.9 mm) 76 mm x 330 mm) with case) Spoolmate 160 A at 60% duty cycle, 70– 875 IPM Aluminum .030 –.035” (0.8 – 0.9 mm) 9”H x 2.5”W x 11 lb. (5 kg) 200 200 A at 60% duty cycle with (1.8–22.2 m/min.) Solid Steel .023 –.035” (0.6 – 0.9 mm) 14.5”L (229 mm x optional heavy-duty head tube Stainless .023 –.035” (0.6 – 0.9 mm) 64 mm x 368 mm) Spoolmate 150 A at 60% duty cycle, 115–715 IPM Aluminum .023 –.035” (0.6 – 0.9 mm) 11.5”H x 2.25”W x 9.1 lb. (4.1 kg) 3035 200 A at 60% duty cycle with (2.9 –18.1 m/min.) Solid Steel .023 –.035” (0.6 – 0.9 mm) 8”L (291 mm x optional heavy-duty head tube Stainless .023 –.035” (0.6 – 0.9 mm) 57 mm x 203 mm)

Welding Current Rating Wire Feed Speed Maximum Spool Size Capacity


*Wire speed dependent on power source usedSUGGESTED POWER SOURCESFor Spoolmate 100 •Millermatic® 141 •Millermatic® 190 •Millermatic® 211 Auto-Set™ with MVP™ •Multimatic™ 200 •Syncrowave™ 210 TIG/MIG CompleteFor Spoolmate 200 • Millermatic® 212 Auto-Set™ •Millermatic® 252For Spoolmate 3035 •Direct connect to vintage Millermatic 210/212 tapped-voltage models •Millermatic® 141/190/211/212 with SGA 100 control • Bobcat™ 225 with SGA 100C control

Spoolmate™ CONSUMABLESPart No. 186406, Contact Tip, .035 M5 x .8 mm Thread.Part No. 186419, Contact Tip, .030 M5 x .8 mm Thread.Part No. 199730, Contact Tip, .023 M5 x .8 mm Thread.Part No. 186409, Gas Diffuser.Part No. 186414, .030” (0.8 mm) to .035” (0.9 mm) V-Knurl Drive Roll.


MILLER®

Automated MIG Accessories

Carts, Cylinder Racks and Running Gear

MLR/2784

COOLANT FLOW SWITCHFor Auto-Axcess. To ensure coolant is flowing in the system. Lack of coolant flow may cause damage to water-cooled guns. Module allows wiring into the peripheral connector port. 50 ft. (15.2 m) cable with connector and separate shell connector for simple modification to desired length in the field. It can be mounted on Auto-Axcess or as desired elsewhere. Quarter-turn quick connection.Part No. 195461.

CYLINDER CARTFor Invisions, XMTs, and CST 280. Has ad-justable handles and is slanted for convenient access to power source front panel controls. Carries two 160-pound (72.6 kg) gas bottles with feeder mounted to tray above power source. Accommodates Coolmate 3 or 4 coolant system.Part No. 042537.

UNIVERSAL CART & CYLINDER RACKFor Invision 352 MPa, XMT 304/350, CST 280, Diversions, Maxstar 200/280, and Dynasty200/280. Also accommodates single gas cylinder up to 56” (142.2 cm) high measuring 6” to 9” (15.2 to 22.8 cm) in diameter. Provides storage for auxiliary items such as electrodes, helmets and gloves.Part No. 042934.

FEEDER CARTA low-profile, creeper cart which allows the operator to easily move the feeder around the work area.Part No. 142382.

RUNNING GEAR/CYLINDER RACKFor Millermatic 141, 190, 211 Auto-Set, and Diversions. Heavyduty construction with 8” rubber rear wheels. Convenient front handles, cable holders and plastic consumable box. For gas cylinders no greater than 7” (178 mm) in diameter or 65 pounds (29.5 kg) in weight.Part No. 301239.

DUAL EZ-CHANGE™ LOW CYLINDER RACK WITH ELEVATED GUN & CABLE RACKFor Millermatic 212 Auto-Set and 252, and Syncrowave 210. Allows operators to easily roll cylinders on and off the rack with no lifting. Gun and cable rack keeps cables off the floor and tangle free.Part No. 300337.

DUAL CYLINDER RACKFor Millermatic 350P and 350P Aluminum. Replaces single cylinder rack.Part No. 195299.

ELEVATED GUN & CABLE RACKFor Millermatic 212 Auto-Set and 252, and Syncrowave 210. For use with single cylinder rack. (Included with Dual EZ-Change Low Cylinder Rack.)Part No. 300335.

STANDARD RUNNING GEAR & CYLINDER RACKFor CP-302, Deltawelds, Dimensions, and Gold Stars. Running gear has 10” (254 mm) rear wheels and 5” (127 mm) front casters for excellent mobility on the shop floor. Very easy to install. Handles double as a cable holder. Cylinder rack only installs on Standard Running Gear.Part No. 042886, Running gear.Part No. 042887, Cylinder rack.

MIGRunner™ CARTFor Invisions, AlumaFeed System, and XMTs with single feeders. Small footprint and easily maneuverable, with cylinder rack low enough that you do not have to lift bottles. Durable, heavy-duty ergonomic handles are designed for comfort.Part No. 195445.

RUNNING GEAR CYLINDER RACKFor Invisions, Axcess 300/450, Dimension 650, and XMTs with single or dual feeders. Holds two large gas cylinders and has gun cable hangers and a consumable drawer in front. A convenient handle allows the cart to be pulled easily through doorways. Power source and single or dual feeders can be mounted to cart and secured.Part No. 300408.

THUNDERBOLT XL RUNNING GEARMounts easily to unit and provides convenient portability. Includes two wheels, two feet and a handle.Part No. 043927.

2-WHEEL TROLLEY CARTFor Maxstar/Dynasty 200 with or without Coolmate 1. Easy-to-maneuver two-wheel cart features single-cylinder rack, chain for cylinder, straps (quick and easy to detach and carry machine), cable holders, torch holder, storage area, and filler rod storage area.Part No. 300480.


MILLER®

Carts, Cylinder Racks and Running Gear

Coolant Systems

Engine Drive Accessories

MLR/2784

Coolmate™ COOLANT SYSTEMSPart No. 300360, Coolmate™ 1. 115 VAC. For Maxstar/Dynasty 200. Light industrial, 1-gallon cooler designed for water-cooled torches on power sources rated up to 200 A*.Part No. 300972, Coolmate™ 1.3. 115 VAC. For Maxstar/Dynasty 280. Light industrial, 1.3-gallon cooler designed for water-cooled torches on power sources rated up to 280 A*.Part No. 043007, Coolmate™ 3. 115 VAC. Economical, 3-gallon cooler designed for water-cooled torches rated up to 500 A*.Part No. 043008, Same as above except 230 VAC.Part No. 300245, Coolmate™ 3.5. 115 VAC. For Maxstar 350/700 and Dynasty 350/700. Industrial, 3.5-gallon cooler designed for water-cooled torches rated up to 600 A*.*May vary with torch design and cable length. Miller coolant systems are backed by the best warranty in the industry — one full year.

Coolmate 1 115 VAC, 60 Hz 2.1 A (60 Hz) 2850 W (9700 BTU/hr.) 1210 W (4120 BTU/hr.) 1 gal. (3.8 L) 8”H x 7.5”W x 23.75”D 25 lb. (11 kg) 1.8 qt./min. (1.7 L/min.) 1.1 qt./min. (1 L/min.) (203 mm x 191 mm x 603 mm)Coolmate 1.3 115 VAC, 60 Hz 4.7 A (60 Hz) 3400 W (11,600 BTU/hr.) 1330 W (4540 BTU/hr.) 1.3 gal. (4.9 L) 11.25”H x 10.38”W x 24”D 43 lb. (20 kg) 3.8 qt./min. (3.6 L/min.) 1.1 qt./min. (1 L/min.) (286 mm x 264 mm x 610 mm)Coolmate 3 115 VAC, 50/60 Hz 5.9 A (50 Hz), 4.7 A (60 Hz) 3820 W (13,000 BTU/hr.) 1420 W (4840 BTU/hr.) 3 gal. (11.4 L) 13.25”H x 12.25”W x 23.25”D 40 lb. (18 kg) 230 VAC, 50/60 Hz 2.5 A (50 Hz), 3.0 A (60 Hz) 4.2 qt./min. (4.0 L/min.) 1.1 qt./min. (1 L/min.) (337 mm x 311 mm x 584 mm)Coolmate 3.5 115 VAC, 50/60 Hz 5.9 A (50 Hz), 4.7 A (60 Hz) 4140 W (14,000 BTU/hr.) 1660 W (5660 BTU/hr.) 3.5 gal. (13.2 L) 11.75”H x 15.75”H x 26”D 64 lb. (29 kg) 5.0 qt./min. (4.7 L/min.) 1.1 qt./min. (1 L/min.) (298 mm x 400 mm x 660 mm)Coolmate 4 115 VAC, 50/60 Hz 5.9 A (50 Hz), 4.7 A (60 Hz) 5500 W (18,000 BTU/hr.) 1780 W (6070 BTU/hr.) 4 gal. (15 L) 16.25”H x 15.25”W x 18.75”D 38 lb. (17 kg) 5.9 qt./min. (5.6 L/min.) 1.1 qt./min. (1 L/min.) (413 mm x 387 mm x 476 mm)

Model Maximum Current Draw Maximum Cooling Capacity

Tank CapacityIEC Cooling Capacity Dimensions Net WeightMotor Input

Voltage

COOLANTSold in multiples of four in 1-gallon recyclable plastic bottles. Miller® coolants contain a base of ethylene glycol and deionized water to protect against freezing to -37° Fahrenheit (-38° C) or boiling to227° Fahrenheit (108° C). Part No. 043810, Low-Conductivity Coolant (clear, pre-mixed). For TIG and MIG applications. NOT for use in push-pull systems or systems where aluminum is in coolant path/circuit.Part No. 043809, Aluminum-Protecting Coolant (green, pre-mixed). Primarily used in push-pull systems where aluminum is in coolant path/circuit and high frequency is NOT used.

Small Runner™ CARTFor Maxstar/Dynasty 280 with or without Coolmate 1.3. Cart features single cylinder rack, foot pedal holder, two cable/torch holders and two TIG filler holders.Part No. 300988.

Runner™ CARTFor Maxstar 350/700 and Dynasty 350/700 with or without Coolmate 3.5. Cart features single cylinder rack, foot pedal holder, three cable/ torch holders and two TIG filler holders.Part No. 300244.

No. 37 RUNNING GEARFor Syncrowave 250 DX/350 LX. Includes two 10” (254 mm) wheels, two 5” (127 mm) cast-ers, two-compartment rack for gas cylinders, and handles. Provides excellent mobility and easy to install.Part No. 195282.

SHOPMATE 300 RUNNING GEAR/DUAL CYLINDER RACKFor Shopmate 300 DX. The large 10” (254 mm) rear wheels and 5” (127 mm) front casters on this running gear provide excellent mobility on the shop floor, making it easier to move the power source. Very easy to install. Handles double as a cable holder. Holds two cylinders.Part No. 300145.

CABLE HOLDERFor Big Blue 400 and 500 CC, 500 Pro, 700 Duo Pro, 800 Duo Pro, and 800 Duo Air Pak.Part No. 043946.

VANDALISM LOCKOUT KITLockable hinged steel panels cover and protect name plate gauges and ignition switch (padlock included). Also includes engine compartment door lock and key.Part No. 195118, For Big Blue 400 and 500 CC.Part No. 399802, For Big Blue 500 Pro and 700 Duo Pro.

LIFTING EYEFor current model Blue Star 185.Part No. 195353.

RUNNING GEARFor current model Blue Star 185. Compact and balanced, lightweight wheelbarrow-style running gear provides easy onsite mobility.Part No. 301246.



Heavy-duty, water- and mildew-resistant covers protect and maintain the finish of the welder.Part No. 301245, For current model Blue Star 185.Part No. 300919, For current model Gas Bobcats and Trailblazers (except Air Pak) without Protective Cage or Running Gear.Part No. 300920, For current model Gas Bobcats and Trailblazers (except Air Pak) with Protective Cage or Running Gear.Part No. 301099, For current model Diesel Bobcats and Trailblazers without Protective Cage or Running Gear.Part No. 300379, For Trailblazer 302 Air Pak.Part No. 195301, For Big Blue 350 PipePro, 400 Pro, and 450 Duo CST.Part No. 194683, For Big Blue 400 and 500 CC, 500 Pro (CA model), and 700 Duo Pro.Part No. 301113, For Big Blue 500 Pro (T4F model), 800 Duo Pro and 800 Duo Air Pak.Part No. 301262, For Millermatic 141 and 190.Part No. 195149, For Millermatic 211 Auto-Set with MVP.Part No. 195142, For Millermatic 212 Auto-Set, 252, 350P/350P Aluminum, and Syncrowave 210. Features side pocket.Part No. 300388, For Spectrum 875.Part No. 300184, X-CASE for Spectrum 375 X-TREME and 625 X-TREME, and Maxstar 150 models.Part No. 195321, For Maxstar 200 Series.Part No. 195478, For XMT 304 and 350.

MILLER®

Engine Drive Accessories

Protective Covers

MLR/2784

MULTI-TERRAIN RUNNING GEARFor Gas/LP Bobcats and Trailblazers. Includes two heavy-duty 15” tires, two 8” rubber swivel casters and a heavy-duty handle. Recom-mended for all surfaces and applications and is easy to move around the jobsite.Part No. 300913, With inner tubes.Part No. 300914, With Never Flat™ tires.

OFF-ROAD RUNNING GEARFor Gas/LP Bobcats and Trailblazers. Includes four heavy-duty 15” tires and a rugged handle to provide maximum maneuverability.Part No. 300909, With inner tubes.Part No. 300910, With Never Flat™ tires.

OFF-ROAD RUNNING GEAR with PROTECTIVE CAGE & NEVER FLAT™ TIRESFor Gas/LP Bobcats and Trailblazers. Running gear and rugged cage with cable holders protects your investment and is easy to move around the jobsite.Part No. 300912.

PROTECTIVE CAGE with CABLE HOLDERSRugged cage with cable holders protects your investment. Works with Running Gear, Gas Cylinder Mounting Assembly or LP Tank Mounting Assembly.Part No. 300921, For Gas/LP Bobcats and Trailblazers.Part No. 300473, For Trailblazer 302 Air Pak.

GAS CYLINDER MOUNTING ASSEMBLYFor Gas Bobcats and Trailblazers. Designed for use with Running Gear, Protective Cage, or by itself. Includes base tray with bottle bracket, vertical support rack and safety chain. Note: Not for use with LP Tank Mounting Assembly. Not recommended for use with Protective Cover.Part No. 300918.

HOSE & LP TANK MOUNTING ASSEMBLYFor LP Bobcats and Trailblazers. Designed for use with Running Gear, Protective Cage, or by itself. Includes bracket and clamp to mount 33 and 43-pound tanks horizontally, and hose with fittings to converter. Note: Cannot be used with Gas Cylinder Mounting Assembly. Not recommended for use with Protective Cover.Part No. 300917.

REMOTE OIL DRAIN & FILTER KITFor Gas Bobcats and Trailblazers. Front mount for Kohler engines makes servicing easy when engine drive is mounted in tight spots.Part No. 300923.

ALL-PURPOSE RUNNING GEAR with NEVER FLAT™ TIRESFor Diesel Bobcats and Trailblazers. Includes two heavy-duty 15” tires, two 8” rubber swivel casters and a heavy-duty handle. Recom-mended for all surfaces and applications and is easy to move around the jobsite.Part No. 300477.

PROTECTIVE CAGE WITH CABLE HOLDERSFor Diesel Bobcats and Trailblazers. Rugged cage with cable holders protects your invest-ment. Works with Running Gear, Gas Cylinder Mounting Assembly or with trailer. Note: Not for use with Protective Cover.Part No. 195331.

GAS CYLINDER MOUNTINGASSEMBLYFor Diesel Bobcats and Trailblazers. Designed for use with Protective Cage, or by itself. Includes base tray with bottle bracket, vertical support rack and safety chain. Note: Not recommended for use with Protective Cover.Part No. 195330.

FULL KVA ADAPTER CORDFor Bobcats, Trailblazers, and Big Blues (except 400 and 500 CC). NEMA 14-50P to NEMA 6-50R. Adapts engine drive 120/240-volt plug to common Millermatic and Spectrum 240-volt plug.Part No. 300517.

SINGLE-PHASE FULL KVA PLUG KITFor Bobcats, Trailblazers, and Big Blues (except 400 and 500 CC). Can be wired for 120 or 240 VAC loads.Part No. 119172.

THREE-PHASE FULL KVA PLUG KITPart No. 165963, For Bobcat 3 Phase.Part No. 254140, For Big Blue 500 Pro, 700 Duo Pro, 800 Duo Pro, and 800 Duo Air Pak.


INDUSTRIAL MIG 4/0 KITConsists of flowmeter regulator with 10 ft. (3 m) gas hose, 10 ft. (3 m) 4/0 feeder weld cable with lugs, and 15 ft. (4.6 m) work cable with 600-amp C-clamp. Dual kit comes with two flowmeter regulators and gas hoses.Part No. 300390, For single feeders.Part No. 300957, For dual feeders.

SHOPMATE 300 MIG KITIncludes flow gauge regulator and 10 ft. (3 m) gas hose for argon or AR/CO2 mix, 10 ft. (3 m) 1/0 inter connecting cable, 15 ft. (4.6 m) 1/0 work cable with clamp, and consumable storage box.Part No. 300150.

OPTIMA™ MIG PULSE CONTROLFor XMT CC/CV models. A multipurpose, microprocessor-based pulse control for syner-gic MIG (wire welding or GMAW), manual MIG pulsing or standard MIG welding. Use this control with above power sources and any Miller® wire feeder, including au-tomatic feeders and spool guns. Includes 25 ft. (7.6 m) cord with 14-pin plug.Part No. 043389.

NO. 2 STICK CABLE SETConsists of 15 ft. electrode cable with holder and work cable with clamp. 200 A, 100% duty cycle.Part No. 195196, 15 ft. (4.6 m).

2/0 STICK CABLE SETConsists of either 50 ft. 2/0 electrode cable with holder and 50 ft. work cable with clamp. 100% duty cycle.Part No. 173851, 50 ft. (15 m), 350 A.

INDUSTRIAL MIG 4/0 KIT with DINSE CONNECTORSame as Industrial MIG 4/0 Kit except weld and work cables have Dinse connector on one end instead of lug.Part No. 300405, For single feeders.Part No. 300956, For dual feeders.

MILLER®

MIG Accessories

Stick Accessories

TIG Accessories

MLR/2784

TIG CONTRACTOR KITMiller Multimatic™ 200 TIG Kit with foot control provides everything you need for remote TIG welding with the Multimatic™ 200 multiprocess welder.Comes complete with: •Weldcraft® 150-amp WP-17 TIG torch with 25 mm Dinse connector •AK-2 torch accessory kit •Remote foot control •Smith flow regulator and gas hosePart No. 301130.

WELDCRAFT™ WATER-COOLED TORCH KITSFor Maxstars (except 150 models), Dynastys, and Syncrowave 250 DX/350 LX. Kit comes with 25 ft. (7.6 m) TIG torch with Dinse-style connector (thread-lock on 400-amp kit), torch cable cover, work clamp with 15 ft. (4.6 m) cable [12 ft. (3.7 m) cable on 400-amp kit],flowmeter regulator with gas hose, and torch accessory kit.Part No. 300185, 250 A, W-250 (WP-20).Part No. 300186, 400 A, W-400 (WP-18SC).

14-PIN TO 6-PIN ADAPTER CORDFor Maxstar 150 STL and STH, and Multimatic 200. Adapts Miller® 14-pin foot control or fingertip control to a 6-pin plug.Part No. 300507.

RCCS-6M (6-pin plug) CONTROL North/south rotary-motion fingertip current/contactor control attaches to TIG torch using two hook-and-loop fasteners. Great for ap-plications that require a finer amperage control. Includes cord and plug.Part No. 195184, 13.25 ft. (4 m) cord.

RFCS-6M (6-pin plug) CONTROL For Maxstar 150 STL and STH, and Multimatic 200.Part No. 195183, 13.25 ft. (4 m) cord.Part No. 195504, 20-ft (6 m) cord.

RFCS-5 (5-pin plug) CONTROL Foot pedal current/contactor control. Includes cord and plug.Part No. 043716, 20-ft (6 m) cord.

RFCS-14 (14-pin plug) CONTROLHD foot pedal current/contactor control. Includes cord and plug.Part No. 043554, 20-ft (6 m) cord.

RMLS-14 (14-pin plug) ROCKER SWITCH Momentary- and maintained-contact rocker switch for contactor control. Push forward for maintained contact and backward for momentary contact. Includes 26.5 ft. (8 m) cord and plug.Part No. 129337.


WC-24 WELD CONTROLFor Spoolmate 200 and Spoolmatic/Spool-matic Pro. Easily mounts on power source. Designed for use with Miller CV power sources with 14-pin receptacles and supplying 24 VAC.Part No. 137549.

TURNTABLE ASSEMBLYAllows feeder to rotate as operator changes work position. Reduces strain and bending of gun cable.Part No. 146236.

WIRE STRAIGHTENERFor 20 Series and 70 Series.Part No. 141580, For .035 –.045” (0.9 –1.1 mm) wire.Part No. 141581, For 1/16–1/8” (1.6 – 3.2 mm) wire.

8-CONDUCTOR EXTENSION CABLES (14-PIN)For XR-Controls, SuitCase 12RC feeder, 20 Series feeders, and 70 Series (S/D/DX model) feeders. For 14-pin remote controls/24 VAC wire feeders. 14-pin plug to a 14-pin socket. (Not for 115-volt XR or 50 Series feeders.)Part No. 242208025, 25 ft. (7.6 m).Part No. 242208050, 50 ft. (15 m).Part No. 242208080, 80 ft. (24.4 m).

11-CONDUCTOR EXTENSION CABLES (14-PIN)For XR-AlumaFeed, MPa Plus feeders, and 60M feeders. 11-conductors to support contactor control and remote voltage control on all Miller® electronic CV 14-pin power sources. Additional functions supported when using the Invision MPa or XMT MPa power sources include synergic Pulsed MIG, remote process select and side select capabilities.Part No. 247831025, 25 ft. (7.6 m).Part No. 247831050, 50 ft. (15 m).Part No. 247831080, 80 ft. (24.4 m).

14-CONDUCTOR EXTENSION CABLES (14-PIN)For HDC and WC-115 weld controls, XR-Controls prior to serial number KK309906, and 50 Series feeders. Fully-loaded 14-pin exten-sion cables for remote controls, and 24-volt and 115-volt feeders.Part No. 242205025, 25 ft. (7.6 m).Part No. 242205050, 50 ft. (15 m).

SGA 100 SPOOL GUN CONTROLS & KITRequired to connect Spoolmate 3035 spool gun to any Millermatic 141, 190, or 211. Also allows connection to virtually any similar MIG welder — Miller or other brands. Includes 10 ft. (3 m) 115 VAC power cable and plug, 6 ft.(1.8 m) interconnecting cable, and 5 ft. (1.5 m) gas hose.Part No. 043856.

SGA 100C SPOOL GUN CONTROLS & KITSGA with contactor required to connect Spoolmate 3035 spool gun to CV engine drives like the Miller Bobcat. Includes 10 ft. (3 m) 115 VAC power cable and plug, 6 ft. (1.8 m) inter-connecting cable, and 5 ft. (1.5 m) gas hose.Part No. 043857.

WC-115A WELD CONTROLOperates on 115 VAC, and designed primarily for constant current DC power sources. Can also be used with constant voltage power sources or DC engine drives supplying 115 VAC. Used with a CC source, the control circuit functions in a voltage-sensing mode and with a CV source, it functions as a constant-speed circuit. Includes wire run-in and drive motor acceleration controls which ensure optimum arc starting performance.Part No. 137546, Without contactor.Part No. 137546-01-1, With contactor.

SPOOL ADAPTERFor use with 14-pound (6.4 kg) spool of Hobart or Lincoln self-shielding wire.Part No. 047141.

MILLER®

TIG Accessories

Wire Feeder Accessories

MLR/2784

50 MM DINSE-STYLE with WATER RETURN LINEFor Maxstar 200/280/350, Dynasty 200/280/350, and Syncrowave 250 DX/350 LX. Used with all Weldcraft™ water-cooled torches.Part No. 195377.

AIR-COOLED TIG (GTAW) TORCH CONNECTORSFor CST 280, Maxstar 200/280/350, Dynasty 200/280/350, and Syncrowave 250 DX/350 LX. 50 mm Dinse-style for one-piece air-cooled torch.Part No. 195378.

CABLE COVERSPart No. WC-4-10, 10 ft. (3 m).Part No. WC-4-22, 22 ft. (6.7 m).


MILLER®

Drive Rolls, Tongs, & TipsMLR/2784

DRIVE ROLL KITSBase selection of drive rolls upon the following recommended usages:1. V-Grooved rolls for hard wire.2. U-Grooved rolls for soft and soft shelled cored wires.3. U-Cogged rolls for extremely soft shelled wires.4. V-Knurled rolls for hard shelled cored wires.5. Drive roll types may be mixed to suit particular requirement (example: V-Knurled roll in combination with U-Grooved).

Part No. Part No.Fraction FractionType TypeDecimal DecimalMetric Metric087131 V-Grooved .023 – .025” .023 – .025” 0.6 mm079594 V-Grooved .030” .030” 0.8 mm204579* V-Grooved .030 and .035” .030 and .035” 0.8 and 0.9 mm190300* V-Grooved .035 and .045” .035 and .045” 0.9 and 1.22 mm079595 V-Grooved .035” .035” 0.9 mm079596 V-Grooved .045” .045” 1.2 mm079597 V-Grooved .052” .052” 1.3 mm079598 V-Grooved 1/16” .062” 1.6 mm044749 U-Grooved .035” .035” 0.9 mm079599 U-Grooved 3/64” .047” 1.2 mm079601 U-Grooved 1/16” .062” 1.6 mm079606 V-Knurled .035” .035” 0.9 mm079607 V-Knurled .045” .045” 1.2 mm238687* VK-Grooved .045 and 1/16” .045 and 1/16” 1.22 and 1.6 mm079608 V-Knurled .052” .052” 1.3 mm079609 V-Knurled 1/16” .062” 1.6 mm089984 V-Knurled .068 – .072” .068 – .072” 1.8 mm079610 V-Knurled 5/64” .079” 2.0 mm079611 V-Knurled 3/32” .094” 2.4 mm083318 U-Cogged .045” .045” 1.2 mm079614 U-Cogged 1/16” .062” 1.6 mm

087132 V-Grooved .023 – .025” .023 – .025” 0.6 mm046780 V-Grooved .030” .030” 0.8 mm046781 V-Grooved .035” .035” 0.9 mm227061* V-Grooved .035 and 3/64” .035/.045” 0.9/1.2 mm 046782 V-Grooved 3/64” .045” 1.2 mm046783 V-Grooved .052” .052” 1.3 mm046784 V-Grooved 1/16” .062” 1.6 mm044750 U-Grooved .035” .035” 0.9 mm046785 U-Grooved 3/64” .047” 1.2 mm046787 U-Grooved 1/16” .062” 1.6 mm046792 V-Knurled .035” .035” 0.9 mm046793 V-Knurled 3/64” .045” 1.2 mm046794 V-Knurled .052” .052” 1.3 mm046795 V-Knurled 1/16” .062” 1.6 mm046796 V-Knurled 5/64” .079” 2.0 mm046797 V-Knurled 3/32” .094” 2.4 mm

*Dual-size reversible drive roll

*Dual-size reversible drive roll

Millermatic® 200/210/212/250/251/252/DVI™s /Pulser/Vintage (2 Drive Roll)22/32/52 Series, SuitCase™ 8/12RC & 8/12VS, Drive Rolls Reach Feeders (2 Drive Roll)

22/24 Series & SuitCase Feeders Nylon Wire Guides (For Feeding Aluminum Wire)Part No. 151203, .047” (1.2 mm) Wire Diameter.Part No. 151205, 1/16” (1.6 mm) Wire Diameter.Part No. 194264, 3/32” (2.4 mm) Wire Diameter.

Millermatic® 300/350/350P with Meters (4 Drive Roll)54 Series, 24A Drive Rolls & R-115 Feeders (4 Drive Roll)

2 Roll Kit Part No.

4 Roll Kit Part No. FractionType Decimal Metric

151030 151024 V-Grooved .023 – .025” .023 – .025” 0.6 mm — 151025 V-Grooved .030” .030” 0.8 mm 151032 151026 V-Grooved .035” .035” 0.9 mm 190300* 209533* V-Grooved .035 and 3/64” .035/.045” 0.9/1.2 mm — 161190 V-Grooved .040” .040” 1.0 mm 151033 151027 V-Grooved 3/64” .045” 1.2 mm 151034 151028 V-Grooved .052” .052” 1.3 mm — 151029 V-Grooved 1/16” .062” 1.6 mm 151044 151036 U-Grooved .035” .035” 0.9 mm — 244293 U-Grooved .035 and 3/64” .035/.045” 1.9/1.2 mm 151045 151037 U-Grooved 3/64” .045” 1.2 mm — 243234 U-Grooved .047” .047” 1.2 mm 151047 151039 U-Grooved 1/16” .062” 1.6 mm — 151041 U-Grooved 3/32” .094” 2.4 mm 151061 151052 V-Knurled .035” .035” 0.9 mm 151062 151053 V-Knurled 3/64” .045” 1.2 mm — 151054 V-Knurled .052” .052” 1.3 mm 151064 151055 V-Knurled 1/16” .062” 1.6 mm 151065 151056 V-Knurled .068 – .072” .068 – .072” 1.8 mm 151066 151057 V-Knurled 5/64” .079” 2.0 mm151067 151058 V-Knurled 3/32” .094” 2.4 mm — 151059 V-Knurled 7/64” .110” 2.8 mm — 151060 V-Knurled 1/8” .126” 3.2 mm— 151070 U-Cogged 3/64” .045” 1.2 mm — 151072 U-Cogged 1/16” .062” 1.6 mm *Dual-size reversible drive roll

62 series feeders, Pipe Pro 12 RC (2 roll kits), 64, 74 series feeder, Pipe Pro Single, Pipe ProSingle DX, Pipe Pro Dual DX, Pipe Worx 400 and all Axcess Feeders (4 roll kit)

MSW & LMSW SERIES TONGS & TIPSStandardPart No. 040197, 6” (152 mm) Tong.Part No. 040198, 12” (305 mm) Tong.Part No. 040199, 18” (457 mm) Tong.Part No. 040211, Standard Tip.Part No. 040212, Flat Tip.MO OffsetPart No. 040200, 6” (152 mm) Tong. Part No. 040201, 12” (305 mm) Tong.Part No. 040202, 18” (457 mm) Tong. Part No. 040215, Tip.TT-6Part No. 040203, 12” (305 mm) Tong. Part No. 040204, 18” (457 mm) Tong. Part No. 040211, Standard Tip.Part No. 040212, Flat Tip.

TT-9Part No. 040205, 12” (305 mm) Tong. Part No. 040206, 18” (457 mm) Tong. Part No. 040211, Standard Tip.Part No. 040212, Flat Tips.G-7 8” (203 mm)Part No. 040207, 8” (203 mm) Tong. Part No. 040211, Standard Tip.Part No. 040212, Flat Tip.FF 8” (203 mm)Part No. 040208, 8” (203 mm) Tong. Part No. 040213, Tip.FH 5” (127 mm)Part No. 040209, 5” (127 mm) Tong. Part No. 040214, Tip.


DINSE-STYLE CONNECTOR KITSFor Invision 352 MPa, AlumaFeed System, XMT 304/350, CST 280, Maxstars, Dynastys, and Syncrowaves. Kits include one male Dinse-style plug which attaches to the work and/or weld cables and plugs into the Dinse-style receptacles on the power source.Part No. 042418, Accepts #4 to #1/0 AWG cable.Part No. 042533, Accepts #1/0 to #2/0 AWG cable.

MILLER®

Welding Electrical AccessoriesMLR/2784

CAM-LOK TWISTLOCK RECEPTACLES/CONNECTORS TWECO-STYLE TWISTLOCK RECEPTACLES/CONNECTORSPart No. 209219, Receptacle Assembly (Female). Includes Receptacle (Brass ((Female)), Insulator (bulkhead front), Insulator (bulkhead rear), Washer, and Nut.Part No. 218183, Receptacle Assembly (Female). Includes Receptacle (Brass ((Female)), (2) O-Rings, Insulator (bulkhead front), Insulator (bulkhead rear), Tooth washer, and Nut.Part No. 191981, Connector, Insulated (Male), No. 4 – 1/0 - 2/0 (25 – 50 mm).Part No. 218677, Connector, Insulated (Female), No. 4 – 1/0 - 2/0 (25 – 50 mm).Part No. 218678, Adapter, Threaded Stud to Tweco (stud hole dia. 5/8”)

SPECTRUM CONNECTORSConnector, TW LK Insulated Male (Tweco-Lenco Type) SK 10-25Part No. 263801.

MAXSTAR 700/DYNASTY 700 CONNECTORSPart No. 225029, Connection Kit, Thread Lock Double DryAdapters.Part No. 225028, Adapter, Torch-Thread Lock Water (7/8 LHT).

Dinse™ TWISTLOCK RECEPTACLES (50/70 SERIES)

Dinse™ TWISTLOCK RECEPTACLES/CONNECTORS

MILLER RECEPTACLES/CONNECTORS

Part No.

Part No.

Part No. Series

Colour

Colour

Part No.208967

Part No.202813

Part No.129525

Part No.186092

Features

Cable Capacity

Cable Capacity

Cable Capacity/Thread Size

Description

Description

Description

039628 Receptacle, Insul. (Female) Black No. 2/0 – 3/0 (25 – 70 mm)039638 Receptacle, Insul. (Female) Black No. 3/0 – 4/0 (70 – 95 mm)056271 Receptacle, Uninsul. (Male) Black —039633 Connector, Insul. Set Scr. Red No. 1/0 – 3/0 (50 – 70 mm) (In-Line Female)039629 Connector, Insul. Set Scr. (Male) Red No. 2 – 1/0 (35 – 50 mm)039630 Connector, Insul. Set Scr. (Male) Red No. 1/0 – 3/0 (50 – 70 mm)039639 Connector, Insul. Set Scr. (Male) Red No. 3/0 – 4/0 (70 – 95 mm)

039801 Receptacle, Insulated (Female) Black —039800 Receptacle, Insulated (Female) Red —057608 Receptacle, Insulated (Female) Yellow —039901 Plug, Insulated (Male) Black No. 1 – 4039608 Plug, Insulated (Male) Red No. 1 – 4039878 Plug, Insulated (Male) Yellow No. 1 – 4039611 Connector, Insulated (Female) Black No. 1 – 4

127837 25 Receptacle, Insulated (Female) —143419 50 Receptacle, Insulated (Male) —127835 25 Connector, Insulated (Female) No. 3 – No. 4129526 50 Connector, Insulated (Female) No. 2 – 1/0 (35 – 50 mm)136600 70 Connector, Insulated (Female) No. 1/0 – 3/0 (50 – 70 mm)138180 95 Connector, Insulated (Female) No. 3/0 – 4/0 (70 – 95 mm)127836 25 Connector, Insulated (Male) No. 3 – No. 4129527 50 Connector, Insulated (Male) No. 2 – 1/0 (35 – 50 mm)134460 70 Connector, Insulated (Male) No. 1/0 – 3/0 (50 – 70 mm)241354 95 Connector, Insulated (Male) No. 3/0 – 4/0 (70 – 95 mm)194722 50 Connector, Insulated (Male) 3/8-24R Flow-Thru 125/150 A194723 50 Connector, Insulated (Male) 7/8-14R Flow-Thru 200 A232728 50/70 Adapter, Threaded Stud to Dinse (stud hole dia. 1/2”)

Receptacle, Brass with O-ring (Female) • — — •Receptacle, Brass (Female) • • • •O-Ring, 0.296 ID x 0.139 H Silicone • — - •O-Ring, 0.739 ID x 0.070 H • • — •Insulator, bulkhead front • • • •O-Ring, 0.989 ID x 0.070 H • • — •Insulator, bulkhead rear • • • •Washer, domed load — — • —.812 ID x 1.450 OD x .070 THKTooth washer, 1 mm intern • • — •Nut, M20-1.5 1.00 Hex .19 H BRS locking • • • •Screw, M10-1.5x 20 Hex HD-PLN 8.8 — — • —PLD SEMS

Receptacle Assembly (Female)

EXTENSIONS FOR DINSE-STYLE CABLE CONNECTORSFor Invision 352 MPa, AlumaFeed System, XMT 304/350, CST 280, Maxstars, Dynastys, and Syncrowaves. Used to adapt or extend weld and/or work cables. Accepts #1/0 to #2/0 AWG cable.Part No. 134460, Male Dinse-style plug.Part No. 136600, Female Dinse-style receptacle.

TWECO®-STYLE CONNECTORFor Invision 352 MPa, AlumaFeed System, XMT 304/350, CST 280, Maxstars, Dynastys, and Syncrowaves. Accepts #1/0 to #2/0 AWG cable. Kit includes one Tweco-style male plug which attaches to the work and/or weld cables and plugs into the Tweco-style receptacles on the power source.Part No. 191981.

191981

218677 218678


PROFESSIONAL SERIES ELECTRODE HOLDERS•Ergonomic — High lever design for greater grip and hand clearance •Lightweight and easy-to-use •Fully in-sulated, high-strength springs for excellent gripping power •Heavy-duty, shock-proof nylon handle •Grooved jaw design insures firm electrode grip •High-impact, high-temperature fiberglass tip insulators •Professional series features high copper alloy tongs, utility series features brass tongs •Holders supplied with allen wrench and cable connections ferrule assuring efficient connections

WORK CLAMPSEG Series — Steel Work Clamps•Zinc plated •Large hex screw cable connection assures safe cable connection every time •Pure copper braided shunts on #EG500 allows both jaws to carry welding currentPGC Series — Copper Alloy•Contoured handle lever for easy jaw opening •Strong gripping power •Large contact area assures positive grounding •Fully insulated spring •Conductor body holds the cable securely •Large hex screw cable connec-tion assures safe cable connection every timeMGC Series — Magnetic Work Clamps•Large contact area assures excellent electrical contact •Strong gripping power •Grounding concealed to prevent dislodgment •Insulated to prevent annealing •Easy installation or removal •Most popular magnetic work clamps in the market

POWER TERMINALS

POWER TERMINAL RUBBER BOOTSPart No. 179848, Positive.Part No. 180732, Negative.

MILLER®

Welding Electrical AccessoriesMLR/2784

Part No.

Part No.

Part No. Cord Range (Min. – Max.)

AmperageCapacity

AmperageCapacity

Description

ElectrodeCapacity

ElectrodeCapacity

CableCapacity

CableCapacity

Length

Length

Weight

Weight

PA532 200 5/32” (4.0 mm) No. 2/0 (70 mm) 8-1/2” (215 mm) 15 oz (415 g)PA316 250 3/16” (4.8 mm) No. 2/0 (70 mm) 9-1/4” (235 mm) 16 oz (450 g)PA732 300 7/32” (5.6 mm) No. 2/0 (70 mm) 10” (250 mm) 19 oz (530 g)PA14HD 400 1/4” (6.4 mm) No. 4/0 (105 mm) 11” (280 mm) 23 oz (650 g)

EG200 200 1-1/2” (40 mm) No. 6–4 (10–16 mm) 7” (175 mm) 7 oz (199 g)EG300 300 2” (50 mm) No. 2–1 (25–35 mm) 8” (200 mm) 14 oz (390 g)EG500 500 2” (50 mm) No. 1/0–4/0 (50–105 mm) 10” (245 mm) 17 oz (490 g)PGC200 200 1” (25 mm) No. 1–1/0 (35–50 mm) 6” (150 mm) 16 oz (445 g)213619 300 2” (50 mm) 1/0 (50 mm) 8” (200 mm) 13 oz (368 g)240697 200 2” (50 mm) No. 6 6-1/4” 6 oz (168 g)

219515 50 amp, 230 volt pin-type wall receptacle —219516 50 amp, 230 volt pin-type male plug 0 – 1.00213380 50 amp, 230 volt pin-type male plug (heavy-duty) 0.625 – 1.320219535 50 amp, 230 volt pin-type cord-mount receptacle 0.425 – 1.31119172 50 amp, 125/250 volt pin-type male plug 0.62 – 1.31254140 Plug, str grd 3P4W 3PH 50A 240V 15-50P —

EXTENSION KITS FOR DINSE-STYLE CABLE CONNECTORSFor Invision 352 MPa, AlumaFeed System, XMT 304/350, CST 280, Maxstars, Dynastys, and Syncrowaves. Used to adapt or extend weld and/or work cables. Kit includes one male Dinse-style plug and one in-line female Dinse-style receptacle.Part No. 042419, Accepts #4 to #1/0 AWG cable.

TWECO®/DINSE ADAPTERFor Invision 352 MPa, AlumaFeed System, XMT 304/350, CST 280, Maxstars, Dynastys, and Syncrowaves. One-piece adapter with Tweco-style male plug (to power source) on one end and Dinse-style female receptacle (for weld cable connec-tion) on other end.Part No. 210061.

DINSE ADAPTERSFor Invision 352 MPa, AlumaFeed System, XMT 304/350, CST 280, Maxstars, Dynastys, and Syncrowaves. One-piece adapter with Dinse-style male plug (to power source) on one end and Tweco or Cam-Lok female receptacle (for weld cable connection) on other end.Part No. 042465, Dinse/Tweco®Adapter.Part No. 042466, Dinse/Cam-Lok Adapter.

EG500

PGC200

PA532, PA316, PA732

PA14HD


HOBART®

Mild Steel ElectrodesHOB/2455

Pipemaster® 60AWS E6010Use Pipemaster 60 for quick starting, excellent arc stability, superior arc drive (penetration), light slag and excellent wash-in. An all-position cellulosic mild steel electrode, it outdoes itself in producing X-ray quality welds. Earthtone grey coating.Typical Applications: •Construction and shipbuilding •General-purpose fabrication •Mainte-nance welding •Out-of-position X-ray welds •Pipe welding •Vertical and overhead plate weldingTypical Mechanical Properties (AW):Tensile Strength (psi): 73,000 (504 MPa)Yield Strength (psi): 63,000 (432 MPa)Elongation % in 2” (50 mm): 26%Approvals and Conformances: •AWS A5.1, E6010 •ASME SFA 5.1, E6010 •Lloyd’s Grade 3m •ABS E6010

Pipemaster® Pro-60AWS E6010Pipemaster Pro-60 is a quick-starting, cellulosic mild steel electrode that provides you with out-standing arc stability, penetration and wash-in. It’s ideal for welding in all positions and produces an X-ray quality weld with light slag that’s easy to remove. Pipemaster Pro-60 can be used to weld the following API 5L steels: Grade A, B, X-42, X-46, X-52, X-56 and for the root pass on material up to X-80. It features enhanced weldabilty and increased physical properties. Earthtone grey coating.Typical Applications: •Construction and shipbuilding •General-purpose fabrication •Mainte-nance welding •Out-of-position X-ray welds •Pipe welding •Vertical and overhead plate weldingTypical Mechanical Properties (AW):Tensile Strength (psi): 79,000 (542 MPa)Yield Strength (psi): 66,000 (456 MPa)Elongation % in 2” (50 mm): 23%Approvals and Conformances: •AWS A5.1, E6010 •ASME SFA 5.1, E6010 •Lloyd’s Grade 3m •En 499, E383C21 •ABS E6010

Hobart® 610AWS E6010Hobart 610 is a mild steel cellulose electrode that gives outstanding arc stability, consistent arc control, quick starts and restarts with low spatter. Its excellent bead wash, penetration and tie-in, plus the all-positional capability, make it a preferred electrode for pipe welding applications or fabrication jobs.Typical Applications: •Pipe welding •Construction and shipbuilding •General purpose fabrica-tion •Maintenance applicationsTypical Mechanical Properties (AW):Tensile Strength (psi): 84,000 (576 MPa)Yield Strength (psi): 70,000 (479 MPa)Elongation % in 2” (50 mm): 26%Approvals and Conformances: •AWS A5.1, E6010 •CWB E4310 •ASME SFA 5.1, F3, A1, E6010

Hobart® 335AAWS E6011The Hobart 335A offers a fine spray transfer that enhances operator appeal in all positions. Designed for use with AC power sources, this all-position, cellulose-based electrode provides stable arc characteristics and good penetration.Typical Applications: •Galvanized steel work •General-purpose fabrication •Railcar •Ship-building •Structural workTypical Mechanical Properties (AW):Tensile Strength (psi): 82,000 (565 MPa)Yield Strength (psi): 69,000 (478 MPa)Elongation % in 2” (50 mm): 26%Approvals and Conformances: •AWS A5.1, E6011 •ASME SFA 5.1 •Lloyd’s 2m, 2Ym •CWB-E4311 •ABS E6011

Pipemaster® 70AWS E7010-P1The Pipemaster 70, an all-position cellulosic mild steel electrode, is excellent for producing X-ray quality welds. It’s quick starting with excellent arc stability, superior penetration, light slag and excellent wash-in. Pipemaster 70 can also help you handle vertical-down welding on all passes on 5L, 5LX and X52 through X65 pipe.Typical Applications: •Welding of high-yield pipe steels •Pipeline welding using downhill travel •Shipbuilding •Storage tanks •Drill platformsTypical Mechanical Properties (AW):Tensile Strength (psi): 83,000 (570 MPa)Yield Strength (psi): 69,000 (475 MPa)Elongation % in 2” (50 mm): 25%Approvals and Conformances: •AWS A5.5, E7010-P1 •ASME SFA 5.5, E7010-P1 •Lloyd’s Grade 3m, 3Ym •ABS E7010-P1

Part No.

Part No.

Part No.

Part No.

Part No.

Diameter

Diameter

Diameter

Diameter

Diameter

Package Size

Package Size

Package Size

Package Size

Package Size

Recommended Operating Ranges





S116532-035 3/32” (2.4 mm) 40 - 70 amps 50 lb (22.7 kg) Sealed CanS116532-045 3/32” (2.4 mm) 40 - 70 amps 5 lb (2 kg) Plastic PakS116532-089 3/32” (2.4 mm) 40 - 70 amps 10 lb (4.5 kg) Plastic PakS116544-035 1/8” (3.2 mm) 65 - 130 amps 50 lb (22.7 kg) Sealed CanS116544-045 1/8” (3.2 mm) 65 - 130 amps 5 lb (2 kg) Plastic PakS116544-089 1/8” (3.2 mm) 65 - 130 amps 10 lb (4.5 kg) Plastic PakS116551-035 5/32” (4.0 mm) 90 - 175 amps 50 lb (22.7 kg) Sealed CanS116551-045 5/32” (4.0 mm) 90 - 175 amps 5 lb (2 kg) Plastic PakS116551-089 5/32” (4.0 mm) 90 - 175 amps 10 lb (4.5 kg) Plastic PakS116558-035 3/16” (4.8 mm) 140 - 225 amps 50 lb (22.7 kg) Sealed Can

S129432-033 3/32” (2.4 mm) 40 - 70 amps 10 lb (4.5 kg) Sealed Can S129432-035 3/32” (2.4 mm) 40 - 70 amps 50 lb (22.7 kg) Sealed Can S129432-045 3/32” (2.4 mm) 40 - 70 amps 5 lb (2 kg) Plastic Pak S129432-089 3/32” (2.4 mm) 40 - 70 amps 10 lb (4.5 kg) Plastic Pak S129444-033 1/8” (3.2 mm) 80 - 120 amps 10 lb (4.5 kg) Sealed Can S129444-035 1/8” (3.2 mm) 80 - 120 amps 50 lb (22.7 kg) Sealed Can S129444-045 1/8” (3.2 mm) 80 - 120 amps 5 lb (2 kg) Plastic Pak S129444-089 1/8” (3.2 mm) 80 - 120 amps 10 lb (4.5 kg) Plastic Pak S129451-033 5/32” (4.0 mm) 100 - 160 amps 10 lb (4.5 kg) Sealed Can S129451-035 5/32” (4.0 mm) 100 - 160 amps 50 lb (22.7 kg) Sealed Can S129451-045 5/32” (4.0 mm) 100 - 160 amps 5 lb (2 kg) Plastic Pak S129451-089 5/32” (4.0 mm) 100 - 160 amps 10 lb (4.5 kg) Plastic Pak

S112232-031 3/32” (2.4 mm) 60 - 90 amps 50 lb (22.7 kg) Carton S112232-045 3/32” (2.4 mm) 60 - 90 amps 5 lb (2 kg) Plastic Pak S112232-089 3/32” (2.4 mm) 60 - 90 amps 10 lb (4.5 kg) Plastic Pak S112244-031 1/8” (3.2 mm) 80 - 125 amps 50 lb (22.7 kg) Carton S112244-035 1/8” (3.2 mm) 80 - 125 amps 50 lb (22.7 kg) Sealed Can S112244-045 1/8” (3.2 mm) 80 - 125 amps 5 lb (2 kg) Plastic Pak S112244-089 1/8” (3.2 mm) 80 - 125 amps 10 lb (4.5 kg) Plastic Pak S112251-031 5/32” (4.0 mm) 130 - 160 amps 50 lb (22.7 kg) Carton S112251-035 5/32” (4.0 mm) 130 - 160 amps 50 lb (22.7 kg) Sealed Can S112251-045 5/32” (4.0 mm) 130 - 160 amps 5 lb (2 kg) Plastic Pak S112251-089 5/32” (4.0 mm) 130 - 160 amps 10 lb (4.5 kg) Plastic Pak S112258-031 3/16” (4.8 mm) 160 - 190 amps 50 lb (22.7 kg) Carton S112258-035 3/16” (4.8 mm) 160 - 190 amps 50 lb (22.7 kg) Sealed Can

S129132-035 3/32” (2.4 mm) 40 - 70 amps 50 lb (22.7 kg) Sealed Can S129144-035 1/8” (3.2 mm) 65 - 130 amps 50 lb (22.7 kg) Sealed Can S129151-035 5/32” (4.0 mm) 90 - 175 amps 50 lb (22.7 kg) Sealed Can

S116644-035 1/8” (3.2 mm) 70 - 140 amps 50 lb (22.7 kg) Sealed Can S116651-035 5/32” (4.0 mm) 80 - 190 amps 50 lb (22.7 kg) Sealed Can S116658-035 3/16” (4.8 mm) 120 - 230 amps 50 lb (22.7 kg) Sealed Can


HOBART®


Hobart® 335CAWS E6011The versatile soft-arc electrode Hobart 335C is designed for AC power sources, but it can also be used on DCEP or DCEN. With the ability to weld through paint, mill scale or rust, it is an all-position cellulosic electrode with the ultimate operator appeal.Typical Applications: •General construction •Light sheet metal fabrication •Maintenance and repair welding •Shipbuilding •Welding on galvanized steels •Welding through paint, mill scale or rustTypical Mechanical Properties (AW):Tensile Strength (psi): 83,000 (572 MPa)Yield Strength (psi): 72,000 (500 MPa)Elongation % in 2” (50 mm): 27%Approvals and Conformances: •AWS A5.1, E6011 •ASME SFA 5.1 •Lloyd’s 2m, 2Ym •ABS E6011

Hobart® 447AAWS E6013Fast freeze characteristics make this the perfect choice for welding applications that have poor fit-up conditions. Produces a very stable arc with good weld bead appearance. Excellent choice for sheet metal welding.Typical Applications: •General-purpose fabrication •Machine parts •Metal buildings and structures •Shaft buildupTypical Mechanical Properties (AW):Tensile Strength (psi): 74,000 (514 MPa)Yield Strength (psi): 67,000 (463 MPa)Elongation % in 2” (50 mm): 30%Approvals and Conformances: •AWS A5.1, E6013 •ASME SFA 5.1 •ABS E6013

Hobart® 447CAWS E6013A soft arc AWS 6013 electrode, Hobart 447C is the best way to take control of poor fit-up condi-tions. It has fast-freeze characteristics, giving it preferred operator appeal. Hobart 447C versa-tility extends its usage with AC or DC power sources and low open-circuit voltage AC machines.Typical Applications: •General-purpose fabrication •Machine parts •Metal buildings and structures •Shaft buildupTypical Mechanical Properties (AW):Tensile Strength (psi): 75,000 (520 MPa)Yield Strength (psi): 67,000 (465 MPa)Elongation % in 2” (50 mm): 27%Approvals and Conformances: •AWS A5.1, E6013 •ASME SFA 5.1 •CWB E4313 •ABS E6013

Hobart® 14AAWS E7014When you are tackling jobs where higher deposition and speed of travel are needed, the Hobart 14A is the electrode to choose. An all-position electrode, Hobart 14A is equipped with a rutile base and iron powder addition to increase deposition rates and give operator appeal. This electrode offers outstanding slag removal and bead appearance and can be operated with AC, DCEP or DCEN power.Typical Applications: •Frames •Heavy sheet metal •Machine basesTypical Mechanical Properties (AW):Tensile Strength (psi): 81,000 (561 MPa)Yield Strength (psi): 73,000 (505 MPa)Elongation % in 2” (50 mm): 24%Approvals and Conformances: •AWS A5.1, E7014 •ASME SFA 5.1, E7014 •CWB E4914 •ABS E7014

Hobart® Rocket® 7024AWS E7024The Rocket 7024 is engineered with outstanding ”best in class” features including, complete slag removal, extremely low spatter and super smooth soft arc. This E7024 electrode is more forgiv-ing than anything else on the market when it comes to welding material that is moderately rusty or not as clean as it should be. It is also exceptionally fast when used down hand in properly designed weld joints or in horizontal fillet welds and can be used in both single or multipass applications.Typical Applications: •Plate fabrication •Tank fabrication •Barge construction •Construction and earthmoving equipmentTypical Mechanical Properties (AW):Tensile Strength (psi): 82,000 (562 MPa)Yield Strength (psi): 70,000 (484 MPa)Elongation % in 2” (50 mm): 26%Approvals and Conformances: •AWS A5.1, E7024 •ASME SFA 5.1, E7024 •ABS E7024

Part No.

Part No.

Part No.Part No.

Part No.

Diameter

Diameter

DiameterDiameter

Diameter

Package Size

Package Size

Package SizePackage Size

Package Size



Recommended Operating Ranges Recommended

Operating Ranges


S113532-031 3/32” (2.4 mm) 60 - 90 amps 50 lb (22.7 kg) Carton S113544-031 1/8” (3.2 mm) 80 - 125 amps 50 lb (22.7 kg) Carton S113551-031 5/32” (4.0 mm) 130 - 160 amps 50 lb (22.7 kg) Carton

S113832-031 3/32” (2.4 mm) 40 - 80 amps 50 lb (22.7 kg) Carton S113832-045 3/32” (2.4 mm) 40 - 80 amps 5 lb (2 kg) Plastic Pak S113832-089 3/32” (2.4 mm) 40 - 80 amps 10 lb (4.5 kg) Plastic Pak S113844-031 1/8” (3.2 mm) 70 - 120 amps 50 lb (22.7 kg) Carton S113844-045 1/8” (3.2 mm) 70 - 120 amps 5 lb (2 kg) Plastic Pak S113844-089 1/8” (3.2 mm) 70 - 120 amps 10 lb (4.5 kg) Plastic Pak S113851-031 5/32” (4.0 mm) 130 - 160 amps 50 lb (22.7 kg) Carton S113851-045 5/32” (4.0 mm) 130 - 160 amps 5 lb (2 kg) Plastic Pak S113851-089 5/32” (4.0 mm) 130 - 160 amps 10 lb (4.5 kg) Plastic Pak S113858-031 3/16” (4.8 mm) 140 - 220 amps 50 lb (22.7 kg) Carton

S117132-031 3/32” (2.4 mm) 40 - 80 amps 50 lb (22.7 kg) Carton S117132-089 3/32” (2.4 mm) 40 - 80 amps 10 lb (4.5 kg) Plastic Pak S117144-031 1/8” (3.2 mm) 70 - 120 amps 50 lb (22.7 kg) Carton S117144-089 1/8” (3.2 mm) 70 - 120 amps 10 lb (4.5 kg) Plastic Pak S117151-031 5/32” (4.0 mm) 130 - 160 amps 50 lb (22.7 kg) Carton S117151-089 5/32” (4.0 mm) 130 - 160 amps 10 lb (4.5 kg) Plastic Pak

S114232-031 3/32” (2.4 mm) 70 - 90 amps 50 lb (22.7 kg) Carton S114232-045 3/32” (2.4 mm) 70 - 90 amps 5 lb (2 kg) Plastic Pak S114232-089 3/32” (2.4 mm) 70 - 90 amps 10 lb (4.5 kg) Plastic Pak S114244-031 1/8” (3.2 mm) 120 - 145 amps 50 lb (22.7 kg) Carton S114244-045 1/8” (3.2 mm) 120 - 145 amps 5 lb (2 kg) Plastic Pak S114244-089 1/8” (3.2 mm) 120 - 145 amps 10 lb (4.5 kg) Plastic Pak S114251-031 5/32” (4.0 mm) 140 - 210 amps 50 lb (22.7 kg) Carton S114251-045 5/32” (4.0 mm) 140 - 210 amps 5 lb (2 kg) Plastic Pak S114251-089 5/32” (4.0 mm) 140 - 210 amps 10 lb (4.5 kg) Plastic Pak S114258-031 3/16” (4.8 mm) 180 - 280 amps 50 lb (22.7 kg) Carton

S112944-031 1/8” (3.2 mm) 130 - 170 amps 50 lb (22.7 kg) Carton S112951-031 5/32” (4.0 mm) 180 - 245 amps 50 lb (22.7 kg) Carton S112959-031 3/16” (4.8 mm) 200 - 300 amps 50 lb (22.7 kg) Carton S112970-031 7/32” (5.6 mm) 250 - 340 amps 50 lb (22.7 kg) Carton S112981-031 1/4” (6.4 mm) 300 - 380 amps 50 lb (22.7 kg) Carton


HOBART®


Hobart® 418AWS E7018 H4R/E7018-1 H4RHobart 418 gives you all the flexibility you need in a general-purpose, low-hydrogen, mild steel electrode. It also has good out-of-position welding capabilities and provides an X-ray quality deposit. This unique electrode is ideal for tacking prior to finish welding with Fabshield self-shielded, tubular wire, because the construction of the Hobart 418 allows removal of all the slag from the self-shielded wire.Typical Applications: •Field erections, steel structures •Jobs where low-hydrogen weld metal in the tensile strength range of 70,000 psi is required •Low alloy structurals •Low-, medium- and high-carbon steels •Offshore rigs, power plantsTypical Mechanical Properties (AW):Tensile Strength (psi): 78,000 (541 MPa)Yield Strength (psi): 64,000 (441 MPa)Elongation % in 2” (50 mm): 29%Approvals and Conformances: •AWS A5.1, E7018 H4R, E7018-1 H4R •ASME SFA 5.1, E7018 •ABS 3H5, 3Y •Lloyd’s BF3.3YH5 •CWB E4918-1 H4

Hobart® 18ACAWS E7018 H8Highly recommended for applications using small 208/230V, single phase AC welders, 18AC has good operator appeal, excellent re-striking characteristics and an extremely stable arc. 18AC is also an excellent choice for skip or tack welds. The slag is self-removing in most applications. 18AC will work well on all AC power sources and performs exceptionally well on utility-type welders.Typical Applications: •Low, medium and high-carbon steels •Skip or tack welds •Shops, farms, hobbyist •Some high-strength low alloy steelsTypical Mechanical Properties (AW):Tensile Strength (psi): 87,000 (597 MPa)Yield Strength (psi): 75,000 (516 MPa)Elongation % in 2” (50 mm): 30%Approvals and Conformances: •AWS A5.1, E7018 H8 •ASME SFA 5.1, E7018

Hobart® 7018XLMAWS E7018 H4R / E7018-1 H4RA high deposition rate, iron powder electrode for use with either AC or DCEP. The 7018XLM is known for its outstanding ease of welding in vertical or overhead positions. This electrode can be used for mild steel and joining mild steel to low ally steels.Typical Applications: •Field erections •Shipbuilding •Pipeline •ConstructionTypical Mechanical Properties (AW):Tensile Strength (psi): 77,000 (529MPa)Yield Strength (psi): 64,000 (441MPa)Elongation % in 2” (50 mm): 32%Approvals and Conformances: •AWS A5.1, E7018-1 H4R •ASME SFA 5.1, E7018-1 H4R •ABS

Hobart® 718MCAWS E7018 H4R/E7018(M)-1 H4RYou can take control with the electrode that’s formulated and manufactured to give you excellent moisture resistance, good out-of-position welding capabilities and an X-ray quality deposit. The 718MC meets the requirements of military spec. Mil-E-22200/10, including moisture absorption limits of .10% max. as opened and .20% max. after 9 hrs. at 80°F and 80% relative humidity.Typical Applications: •Barge offshore rigs, shipbuilding •Boiler code applications •Field erec-tion, steel structures •Petrochemical plants, power plants •Railcar and locomotive construction •Welding of enameling steels; free machining steels; low alloy structurals; and low, medium or high carbon steels •Weldments in low-temperature environments where low-temperature impacts are importantTypical Mechanical Properties (AW):Tensile Strength (psi): 80,000 (550 MPa)Yield Strength (psi): 69,000 (478 MPa)Elongation % in 2” (50 mm): 28%Approvals and Conformances: •AWS A5.1, E7018 H4R, E7018 -1H4R •ABS 3H5, 3Y •ASME SFA 5.1, E7018 •MIL-E-22200/10

Part No.

Part No.

Part No.

Part No.Diameter

Diameter

Diameter

DiameterPackage Size

Package Size

Package Size

Package Size




Recommended Operating RangesS119932-033 3/32” (2.4 mm) 80 - 100 amps 10 lb (4.5 kg) Sealed Can

S119932-035 3/32” (2.4 mm) 80 - 100 amps 50 lb (22.7 kg) Sealed Can S119932-045 3/32” (2.4 mm) 80 - 100 amps 5 lb (2 kg) Plastic Pak S119932-089 3/32” (2.4 mm) 80 - 100 amps 10 lb (4.5 kg) Plastic Pak S119944-033 1/8” (3.2 mm) 90 - 150 amps 10 lb (4.5 kg) Sealed Can S119944-035 1/8” (3.2 mm) 90 - 150 amps 50 lb (22.7 kg) Sealed Can S119944-045 1/8” (3.2 mm) 90 - 150 amps 5 lb (2 kg) Plastic Pak S119944-089 1/8” (3.2 mm) 90 - 150 amps 10 lb (4.5 kg) Plastic Pak S119951-033 5/32” (4.0 mm) 110 - 230 amps 10 lb (4.5 kg) Sealed Can S119951-035 5/32” (4.0 mm) 110 - 230 amps 50 lb (22.7 kg) Sealed Can S119951-045 5/32” (4.0 mm) 110 - 230 amps 5 lb (2 kg) Plastic Pak S119951-089 5/32” (4.0 mm) 110 - 230 amps 10 lb (4.5 kg) Plastic Pak S119958-035 3/16” (4.8 mm) 150 - 300 amps 50 lb (22.7 kg) Sealed Can S119970-035 7/32” (5.6 mm) 220 - 350 amps 50 lb (22.7 kg) Sealed Can S119981-035 1/4” (6.4 mm) 270 - 380 amps 50 lb (22.7 kg) Sealed Can

S119832-035 3/32” (2.4 mm) 70 - 110 amps 50 lb (22.7 kg) Sealed Can S119832-045 3/32” (2.4 mm) 70 - 110 amps 5 lb (2 kg) Plastic Pak S119832-089 3/32” (2.4 mm) 70 - 110 amps 10 lb (4.5 kg) Plastic Pak S119844-035 1/8” (3.2 mm) 90 - 165 amps 50 lb (22.7 kg) Sealed Can S119844-045 1/8” (3.2 mm) 90 - 165 amps 5 lb (2 kg) Plastic Pak S119844-089 1/8” (3.2 mm) 90 - 165 amps 10 lb (4.5 kg) Plastic Pak S119851-035 5/32” (4.0 mm) 125 - 220 amps 50 lb (22.7 kg) Sealed Can S119851-045 5/32” (4.0 mm) 125 - 220 amps 5 lb (2 kg) Plastic Pak S119851-089 5/32” (4.0 mm) 125 - 220 amps 10 lb (4.5 kg) Plastic Pak

S422032-031 3/32” (2.4 mm) 70-110 amps 50 lb (22.7 kg) Carton S422032-033 3/32” (2.4 mm) 70-110 amps 10 lb (4.5 kg) Sealed Can S422032-035 3/32” (2.4 mm) 70-110 amps 50 lb (22.7 kg) Sealed Can S422044-031 1/8” (3.2 mm) 90-160 amps 50 lb (22.7 kg) Carton S422044-033 1/8” (3.2 mm) 90-160 amps 10 lb (4.5 kg) Sealed Can S422044-035 1/8” (3.2 mm) 90-160 amps 50 lb (22.7 kg) Sealed Can S422051-031 5/32” (4.0 mm) 110-230 amps 50 lb (22.7 kg) Carton S422051-033 5/32” (4.0 mm) 110-230 amps 10 lb (4.5 kg) Sealed Can S422051-035 5/32” (4.0 mm) 110-230 amps 50 lb (22.7 kg) Sealed Can S422058-031 3/16” (4.8 mm) 190-300 amps 50 lb (22.7 kg) Carton S422058-033 3/16” (4.8 mm) 190-300 amps 10 lb (4.5 kg) Sealed Can S422058-035 3/16” (4.8 mm) 190-300 amps 50 lb (22.7 kg) Sealed Can S422070-035 7/32” (5.6 mm) 240-340 amps 50 lb (22.7 kg) Sealed Can S422081-035 1/4” (6.4 mm) 310-390 amps 50 lb (22.7 kg) Sealed Can

S115932-035 3/32” (2.4 mm) 70 - 110 amps 50 lb (22.7 kg) Sealed Can S115932-089 3/32” (2.4 mm) 70 - 110 amps 10 lb (4.5 kg) Plastic Pak S115944-035 1/8” (3.2 mm) 90 - 165 amps 50 lb (22.7 kg) Sealed Can S115944-089 1/8” (3.2 mm) 90 - 165 amps 10 lb (4.5 kg) Plastic Pak S115951-035 5/32” (4.0 mm) 125 - 220 amps 50 lb (22.7 kg) Sealed Can S115951-089 5/32” (4.0 mm) 125 - 220 amps 10 lb (4.5 kg) Plastic Pak S115958-035 3/16” (4.8 mm) 160 - 300 amps 50 lb (22.7 kg) Sealed Can S115970-035 7/32” (5.6 mm) 260 - 340 amps 50 lb (22.7 kg) Sealed Can S115981-035 1/4” (6.4 mm) 270 - 380 amps 50 lb (22.7 kg) Sealed Can

Low Alloy ElectrodesHoballoy® 10018D2AWS E10018-D2 H4RA high-quality electrode, Hoballoy 10018D2 is designed for the welding of high tensile steels and manganese-molybdenum steels requiring tensile strengths of at least 100,000 psi. It has high operator appeal and offers a wide variety of welding advantages including good arc characteristics, ductility, crack-resistance, easy slag removal, and low spatter and smoke. Plus, Hoballoy 10018D2 is an ideal choice for conditions of high heat and humidity because it features a special coating that’s designed to reduce moisture pick-up, which also helps to minimize hydrogen cracking and starting porosity.Typical Applications: •Manganese-moly castings •Alloy forgings •Structurals •Pressure vessel applications in either the as welded or stress-relieved conditionTypical Mechanical Properties (stress relieve 1 hour @ 1150°F):Tensile Strength (psi): 109,000 (772 MPa)Yield Strength (psi): 96,000 (661 MPa)Elongation % in 2” (50 mm): 23%Approvals and Conformances: •AWS A5.5, E10018-D2 H4R •ASME SFA 5.5, E10018-D2 H4R

Part No. Diameter Package SizeRecommended

Operating RangesS125732-035 3/32” (2.4 mm) 70 - 110 amps 50 lb (22.7 kg) Sealed Can S125744-035 1/8” (3.2 mm) 90 - 160 amps 50 lb (22.7 kg) Sealed Can S125751-035 5/32” (4.0 mm) 130 - 220 amps 50 lb (22.7 kg) Sealed Can S125758-035 3/16” (4.8 mm) 200 - 300 amps 50 lb (22.7 kg) Sealed Can S125781-035 1/4” (6.4 mm) 300 - 400 amps 50 lb (22.7 kg) Sealed Can


MaxalMig ER4043•Moderate strength (28ksi/190Mpa typical) •Low melting temperature and high fluidity •Mini-mizes hot cracking and distortion •Clean, bright weldsTypical Applications: •Sport products - scooters/bicycles •General repair and maintenance •Automotive/motorcycle frames and wheels •Welding 6XXX alloysTypical Mechanical Properties (AW):Tensile Strength (psi): 28,000 (190 MPa)Yield Strength (psi): 12,000 (80 MPa)Elongation % in 2” (50 mm): 24%Approvals and Conformances: •AWS A5.10, ER4043 •ASME SFA 5.10, ER4043•AWS A5.01, Class S1, Schedule F •CWB •CE

MaxalMig ER5356•High strength •High ductility, fatigue strength and toughness •Very good color match after anodizing with 5XXX/6XXX base materialsTypical Applications: •Applications using base metal 5086 •Truck frames •Shipbuilding •Railcar •Bus panelsTypical Mechanical Properties (AW):Tensile Strength (psi): 38,000 (260 MPa)Yield Strength (psi): 21,000 (145 MPa)Elongation % in 2” (50 mm): 13%Approvals and Conformances: •AWS A5.10, ER5356 •ASME SFA 5.10, ER5356 •AWS A5.01, Class S1, Schedule F •CWB •ABS •vdTUV •CE •DB

Quantum Arc™ 6AWS ER70S-6When the task demands excellent weldability for CO2 or Ar/CO2 mixtures and you have rusty, scaly or oily plates, choose the mild steel electrode with deoxidizers powerful enough to handle the job. Hobart Quantum Arc 6 is formulated to ensure sound, porosity-free welds over a wide range of general shop fabrications.Typical Applications: •Construction •Farm equipment •General shop work •Steel castings or forging salvage •Shaft buildup •Tanks •AutomotiveTypical Mechanical Properties (AW):Tensile Strength (psi): 85,000 (587 MPa)Yield Strength (psi): 70,000 (485 MPa)Elongation % in 2” (50 mm): 26%Approvals and Conformances: •AWS A5.18, ER70S-6 •ASME SFA A5.18, ER70S-6 •ABS ER705-6 •CWB ER49S-6

Part No.

Part No.Part No.

Diameter

DiameterDiameter

Package Size

Package SizePackage Size

S307608-011 0.035” (0.9 mm) 600 lb (272 kg) Robo-Pak S307608-028 0.035” (0.9 mm) 60 lb (27 kg) Fiber Spool S307608-033 0.035” (0.9 mm) 33 lb (15 kg) Steel Reel S307608-045 0.035” (0.9 mm) 45 lb (20.4 kg) Steel Reel S307608-070 0.035” (0.9 mm) 950 lb (431 kg) Robo-Pak S307608-073 0.035” (0.9 mm) 300 lb (136 kg) Robo-Pak S307608-074 0.035” (0.9 mm) 600 lb (272 kg) Robo-Pak S307608-085 0.035” (0.9 mm) 45 lb (20.4 kg) Fiber Spool S307610-085 0.040” (1.0 mm) 45 lb (20.4 kg) Fiber Spool S307612-011 0.045” (1.2 mm) 600 lb (272 kg) Robo-Pak S307612-028 0.045” (1.2 mm) 60 lb (27 kg) Fiber Spool S307612-033 0.045” (1.2 mm) 33 lb (15 kg) Steel Reel S307612-045 0.045” (1.2 mm) 45 lb (20.4 kg) Steel Reel S307612-070 0.045” (1.2 mm) 950 lb (431 kg) Robo-Pak S307612-074 0.045” (1.2 mm) 600 lb (272 kg) Robo-Pak S307612-085 0.045” (1.2 mm) 45 lb (20.4 kg) Fiber Spool S307615-028 0.052” (1.4 mm) 60 lb (27 kg) Fiber Spool S307615-070 0.052” (1.4 mm) 950 lb (431 kg) Robo-Pak S307618-013 1/16” (1.6 mm) 500 lb (227 kg) Robo-Pak S307618-045 1/16” (1.6 mm) 45 lb (20.4 kg) Steel Reel

404303004 0.030” (0.8 mm) 1 lb (0.45 kg) Plastic Spool 404303012 0.030” (0.8 mm) 12 lb (5.4 kg) Wire Basket 404303504 0.035” (0.9 mm) 1 lb (0.45 kg) Plastic Spool 404303512 0.035” (0.9 mm) 16 lb (7.3 kg) Wire Basket 404303512P 0.035” (0.9 mm) 16 lb (7.3 kg) Wire Basket 404303523L 0.035” (0.9 mm) 100 lb (45 kg) Drum 404303523 0.035” (0.9 mm) 300 lb (136 kg) Drum 404304704 3/64” (1.2 mm) 1 lb (0.45 kg) Plastic Spool 404304712 3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket 404304712P 3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket 404304712P22 3/64” (1.2 mm) 22 lb (10 kg) Plastic Spool 404304723L 3/64” (1.2 mm) 100 lb (45 kg) Drum 404304723 3/64” (1.2 mm) 300 lb (136 kg) Drum 404306212 1/16” (1.6 mm) 16 lb (7.3 kg) Wire Basket 404306223L 1/16” (1.6 mm) 100 lb (45 kg) Drum 404306223 1/16” (1.6 mm) 300 lb (136 kg) Drum

535603004 0.030” (0.8 mm) 1 lb (0.45 kg) Plastic Spool 535603012 0.030” (0.8 mm) 12 lb (5.4 kg) Wire Basket 535603504 0.035” (0.9 mm) 1 lb (0.45 kg) Plastic Spool 535603508 0.035” (0.9 mm) 5 lb (2 kg) Plastic Spool 535603512 0.035” (0.9 mm) 16 lb (7.3 kg) Wire Basket 535603512P 0.035” (0.9 mm) 16 lb (7.3 kg) Wire Basket 535603523L 0.035” (0.9 mm) 100 lb (45 kg) Drum 535603523 0.035” (0.9 mm) 300 lb (136 kg) Drum 535604012 0.040” (1.0 mm) 16 lb (7.3 kg) Wire Basket 535604704 3/64” (1.2 mm) 1 lb (0.45 kg) Plastic Spool 535604712 3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket 535604712P 3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket 535604712P22 3/64” (1.2 mm) 22 lb (10 kg) Plastic Spool 535604723L 3/64” (1.2 mm) 100 lb (45 kg) Drum 535604723 3/64” (1.2 mm) 300 lb (136 kg) Drum 535606212 1/16” (1.6 mm) 16 lb (7.3 kg) Wire Basket 535606223L 1/16” (1.6 mm) 100 lb (45 kg) Drum 535606223 1/16” (1.6 mm) 300 lb (136 kg) Drum 535609412P 3/32” (2.4 mm) 16 lb (7.3 Kg) Wire Basket

HOBART®

Mild Steel Solid Wires

Aluminium Electrodes

HOB/2455

MaxalMig ER4943• 25% higher UTS and 50% higher yield strength than 4043 in as-welded condition •Moderate to high strength (35ksi/240mpa typical) •Low melting temperature and high fluidity •Heat treatableTypical Applications: •Current 4043 and 4643 applications, 1XXX, 3XXX, 5XXX with less than 3.0% Mg (example 5052), and 6XXX •Post weld aged, post weld heatreat and age applications •Automotive/motorcycle frames and wheels •Ladders and furnitureTypical Mechanical Properties (AW):Tensile Strength (psi): 35,000 (240 MPa)Yield Strength (psi): 18,000 (125 MPa)Elongation % in 2” (50 mm): 16%Approvals and Conformances: •AWS A5.10, ER4943 •ASME SFA 5.10,ER4943 •AWS A5.01, Class S1, Schedule F •CWB •ABS •CE

Part No. Diameter Package Size

494303504 0.035” (0.9 mm) 1 lb (0.45 kg) Plastic Spool494303512 0.035” (0.9 mm) 16 lb (7.3 kg) Wire Basket494303512P 0.035” (0.9 mm) 16 lb (7.3 kg) Wire Basket494303523L 0.035” (0.9 mm) 100 lb (45 kg) Drum494303523 0.035” (0.9 mm) 300 lb (136 kg) Drum494304704 3/64” (1.2 mm) 1 lb (0.45 kg) Plastic Spool494304712 3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket494304712P 3/64” (1.2 mm) 16 lb (7.3 kg) Wire Basket494304712P22 3/64” (1.2 mm) 22 lb (7.3 kg) Wire Basket494304723L 3/64” (1.2 mm) 100 lb (45 kg) Drum494304723 3/64” (1.2 mm) 300 lb (136 kg) Drum494306212 1/16” (1.6 mm) 16 lb (7.3 kg) Wire Basket494306223L 1/16” (1.6 mm) 100 lb (45 kg) Drum494306223 1/16” (1.6 mm) 300 lb (136 kg) Drum


HOBART®

Aluminium Electrodes

Tubular Wires

HOB/2455

MaxalTig R5356•High strength •High ductility, fatigue strength and toughness •Very good color match after anodizing with 5XXX/6XXX base materialsTypical Applications: •Applications using base metal 5086 •Truck frames •Shipbuilding •Railcar •Bus panelsTypical Mechanical Properties (AW):Tensile Strength (psi): 38,000 (260 MPa)Yield Strength (psi): 21,000 (145 MPa)Elongation % in 2” (50 mm): 13%Approvals and Conformances: •AWS A5.10, R5356 •ASME SFA 5.10, R5356 •AWS A5.01, Class S1, Schedule F •CWB •ABS •CE

MaxalTig R4043•Moderate strength (28ksi/190Mpa typical) •Low melting temperature and high fluidity •Mini-mizes hot cracking and distortion •Clean, bright weldsTypical Applications: •Sport products - scooters/bicycles •General repair and maintenance •Automotive/motorcycle frames and wheels •Welding 6XXX alloysTypical Mechanical Properties (AW):Tensile Strength (psi): 28,000 (190 MPa)Yield Strength (psi): 12,000 (80 MPa)Elongation % in 2” (50 mm): 24%Approvals and Conformances: •AWS A5.10, ER4043 •ASME SFA 5.10, ER4043 •AWS A5.01, Class S1, Schedule F •CWB •CE

MaxalTig R4943•25% higher UTS and 50% higher yield strength than 4043 in as-welded condition •Moderate to high strength (35ksi/240Mpa typical) •Low melting temperature and high fluidity •Heat treatableTypical Applications: •Current 4043 and 4643 applications, 1XXX, 3XXX, 5XXX with less than 3.0% Mg (example 5052), and 6XXX •Post weld aged, post weld heatreat & age applications •Automotive/motorcycle frames and wheels •Ladders and furnitureTypical Mechanical Properties (AW):Tensile Strength (psi): 35,000 (240 MPa)Yield Strength (psi): 18,000 (125 MPa)Elongation % in 2” (50 mm): 16%Approvals and Conformances: •AWS A5.10, ER4943 •ASME SFA 5.10, ER4943 •AWS A5.01, Class S1, Schedule F •CWB •ABS •CE

FabCO® RXR - FLAT & HORIZONTALAWS E70T-1C, E70T-9C•Outstanding welding performance results in excellent operator appeal •Smooth and stable arc produces an easy to control puddle •Easy slag removal reduces cleanup time •Very flexible amperage range promotes versatilityTypical Applications: •Storage vessels •Earthmoving equipment •Heavy fabrication •RailcarTypical Mechanical Properties (AW):Tensile Strength (psi): 86,000 (592 MPa)Yield Strength (psi): 75,000 (518 MPa)Elongation % in 2” (50 mm): 26%Approvals and Conformances: •AWS A5.20, E70T-1C, E70T-9C •AWS A5.20M, E490T-1C, E490T-9C •ASME SFA 5.20, E70T-1C, E70T-9C •ABS, 100% CO2, 2YSA H10 •CWB, 100% CO2, E492T-9-H8 (1.2 mm - 2.4 mm diameter electrodes) •AWS D1.8/D1.8M, 100% CO2, 1/16” (1.6 mm) & 3/32” (2.4 mm) diameter electrodes •EN17632-B: T55 2 T1 0 C A H10 •CE Marked per CPR 305/2011 (1.2 mm - 2.4 mm diameter electrodes) •MIL-E-24403/1, MIL-70T-1C

FabCO® Excel Arc™ 71 - ALL POSITIONAWS E71T-1C/M H8, E71T-9C/M H8•Low spatter and easy slag removal reduce cleanup time •Increased welder appeal and produc-tivity •Good impact toughness at low temperatures resists cracking in severe applicationsTypical Applications: •Non-alloyed and fine grain steels •Structural steel •General fabrication •Heavy equipmentTypical Mechanical Properties (AW):Tensile Strength (psi): 84,000 (579 MPa) 90,000 (619 MPa)Yield Strength (psi): 77,000 (531 MPa) 83,000 (571 MPa)Elongation % in 2” (50 mm): 28% 26%Approvals and Conformances: • AWS A5.20, E71T-1C H8, E71T-1M H8, E71T-9C H8, E71T-9M H8 •AWS A5.20M, E491T-1C H8, E491T-1M H8, E491T-9C H8, E491T-9M H8 •ASME SFA 5.20, E71T-1C H8, E71T-1M H8, E71T-9C H8, E71T-9M H8 •ABS, 100% CO2 S3YM HH (0.045” - 1/16” diameter electrodes) •Burea Veritas, 100% CO2, S3YM HH (0.045” - 1/16” diameter electrodes) •CWB, 100% CO2 E491T-9-H8, 75-80% Ar/Balance CO2, E491T-9M-H8 (1.2 mm - 1.6 mm diameter electrodes) •DNV, 100% CO2, Y40MS (H10) •EN17632-A: T 46 3 P C/M 2 H10 •CE Marked per CPR 305/2011 •Lloyd’s Reigster, 100% CO2, 3YS H10 •AWS D1.8/D1.8M, 100% CO2 & 75% Ar/25% CO2, (0.045” [1.2 mm] & 1/16” [1.6 mm] diameter electrodes) (0.052” [1.4 mm] diameter 75% Ar/25% CO2 only) •CO2 (0.045" [1.2 mm] and 1/16" [1.6 mm] diameter electrodes)

Part No. Part No.

Part No.

Part No.

Part No.

Diameter Diameter

Diameter

Diameter

Diameter

Package Size Package Size

Package Size

Package Size

Package Size

535606270 1/16” (1.6 mm) 10 lb (4.5 kg) Carton 535606271 1/16” (1.6 mm) 1 lb (0.45 kg) Tube 535609471 3/32” (2.4 mm) 1 lb (0.45 kg) Tube 535609470 3/32” (2.4 mm) 10 lb (4.5 kg) Carton 535612571 1/8” (3.2 mm) 1 lb (0.45 kg) Tube 535612570 1/8” (3.2 mm) 10 lb (4.5 kg) Carton 535615670 5/32” (4.0 mm) 10 lb (4.5 kg) Carton 535618770 3/16” (4.8 mm) 10 lb (4.5 kg) Carton

404306270 1/16” (1.6 mm) 10 lb (4.5 kg) Carton 404306271 1/16” (1.6 mm) 1 lb (0.45 kg) Tube 404309471 3/32” (2.4 mm) 1 lb (0.45 kg) Tube 404309470 3/32” (2.4 mm) 10 lb (4.5 kg) Carton 404312571 1/8” (3.2 mm) 1 lb (0.45 kg) Tube 404312570 1/8” (3.2 mm) 10 lb (4.5 kg) Carton 404315670 5/32” (4.0 mm) 10 lb (4.5 kg) Carton 404318770 3/16” (4.8 mm) 10 lb (4.5 kg) Carton

S246512-002 0.045” (1.2 mm) 60 lb (27 kg) Coil S246512-029 0.045” (1.2 mm) 33 lb (15 kg) Spool S246512-044 0.045” (1.2 mm) 44 lb (20 kg) Spool S246519-002 1/16” (1.6 mm) 60 lb (27 kg) Coil S246519-029 1/16” (1.6 mm) 33 lb (15 kg) Spool S246519-044 1/16” (1.6 mm) 44 lb (20 kg) Spool S246519-056 1/16” (1.6 mm) 600 lb (272 kg) Exacto-Pak S246525-002 5/64” (2.0 mm) 60 lb (27 kg) Coil S246525-008 5/64” (2.0 mm) 600 lb (272 kg) Drum S246529-002 3/32” (2.4 mm) 60 lb (27 kg) Coil S246529-008 3/32” (2.4 mm) 600 lb (272 kg) Drum S246529-069 3/32” (2.4 mm) 800 lb (363 kg) Flat Reel S246539-002 7/64” (2.8 mm) 60 lb (27 kg) Coil S246539-069 7/64” (2.8 mm) 800 lb (363 kg) Flat Reel

S247108-022 0.035” (0.9 mm) 10 lb (4.5 kg) Spool S247108-029 0.035” (0.9 mm) 33 lb (15 kg) Spool S247112-002 0.045” (1.2 mm) 60 lb (27 kg) Coil S247112-023 0.045” (1.2 mm) 15 lb (7 kg) Spool S247112-029 0.045” (1.2 mm) 33 lb (15 kg) Spool S247112-044 0.045” (1.2 mm) 44 lb (20 kg) Spool S247112-064 0.045” (1.2 mm) 400 lb (181 kg) Exacto-Pak S247115-002 0.052” (1.4 mm) 60 lb (27 kg) Coil S247115-023 0.052” (1.4 mm) 15 lb (7 kg) Spool S247115-027 0.052” (1.4 mm) 50 lb (22.7 kg) Spool S247115-029 0.052” (1.4 mm) 33 lb (15 kg) Spool S247115-044 0.052” (1.4 mm) 44 lb (20 kg) Spool S247115-056 0.052” (1.4 mm) 600 lb (272 kg) Exacto-Pak S247119-002 1/16” (1.6 mm) 60 lb (27 kg) Coil S247119-023 1/16” (1.6 mm) 15 lb (7 kg) SpoolS247119-029 1/16” (1.6 mm) 33 lb (15 kg) Spool S247119-044 1/16” (1.6 mm) 44 lb (20 kg) Spool S247119-056 1/16” (1.6 mm) 600 lb (272 kg) Exacto-Pak S247125-002 5/64” (2.0 mm) 60 lb (27 kg) Coil S247125-069 5/64” (2.0 mm) 800 lb (363 kg) Flat Reel

494306270 1/16” (1.6 mm) 10 Lb (4.5 Kg) Carton 494309470 3/32” (2.4 mm) 10 Lb (4.5 Kg) Carton 494312570 1/8” (3.2 mm) 10 Lb (4.5 Kg) Carton


HOBART®

Tubular WiresHOB/2455

Fabshield® XLR-8 - ALL POSITIONAWS E71T-8JD H8•Welds out of position at high currents for high productivity •Excellent mechanical properties within a wide range of heat inputs •Self-shielded; can be used outdoors without sheltering •Excellent slag removal reduces cleanup time and risk of inclusionTypical Applications: •Structural steel fabrication •AWS D1.8 Demand Critical welds •Ship and barge construction •Heavy equipment repairTypical Mechanical Properties (AW):Tensile Strength (psi): 84,000 (579 MPa)Yield Strength (psi): 68,000 (469 MPa)Elongation % in 2” (50 mm): 28%Approvals and Conformances: •AWS A5.20, E71T-8JD H8 •AWS A5.20M, E491T-8JD H8 •ASME SFA 5.20, E71T-8JD H8 •ABS, 3YSA H10 (1/16” - 5/64” diameters) •CWB, E491T-8J-H8 (1.6 - 2.0 mm diameters) •EN 17632-A: T42 2 Y N 2 H10 •CE Marked per CPR 305/2011 (1.6 - 2.0 mm diameters) •AWS D1.8/D1.8M Conformance [1/16” - 5.64” (1.6 - 2.0 mm) diameters]

FabCOR® 86RAWS E70C-6M H4•High deposition rates and efficiencies improving productivity •Virtually no slag coverage and low spatter levels reduce cleanup time •Smooth arc characteristics improve operator appeal •Low diffusible hydrogen weld deposit minimizes risk of crackingTypical Applications: •Railcar •Storage vessels •Steel structures •Earthmoving equipmentTypical Mechanical Properties (AW):Tensile Strength (psi): 81,000 (558 MPa) 85,000 (586 MPa)Yield Strength (psi): 69,000 (476 MPa) 75,000 (517 MPa)Elongation % in 2” (50 mm): 30% 27%Approvals and Conformances: •AWS A5.18, E70C-6M H4 •AWS A5.18M, E48C-6M H4 •ASME SFA 5.18, E70C-6M H4 •ABS, 80% Ar/20% CO2, 3YSA H5 (0.035” - 1/16” diameters) •Bureau Veritas, 80% Ar/20% CO2, S3YMH5 (0.035” - 1/16” diameters) •CWB, 75-95% Ar/Bal-ance CO2, E491C-6MJ-H4 (0.9 mm - 1.6 mm diameters) •CWB, 95% Ar/5% O2, E491C-6MJ-H4 (1.2 mm - 1.6 mm diameters) •DNV, 80% Ar/20% CO2, III Y40MS(H5) •Lloyd’s Register, 80% Ar/20% CO2, 3Y40S H5 •AWS D1.8/D1.8M, 75% Ar/25% CO2, [0.045” (1.2 mm), 1/16” (1.6 mm) diameter] •EN17632-A: T 46 2 M M 3 H5 •CE Marked per CPR 305/2011 (1.2 mm - 1.6 mm diameters)

FabCOR® Edge™ - FLAT & HORIZONTALAWS E70C-6M H4•Higher deposition rates help increase travel speed and productivity •Excellent wetting characteristics and gap bridging capabilities •Virtually no silicon deposits at weld bead toe lines reduces cleanup time and minimizes risk of inclusionsTypical Applications: •Heavy equipment •Agriculture •Robotic and mechanized welding •Non-alloyed and fine grain steelsTypical Mechanical Properties (AW):Tensile Strength (psi): 91,000 (630 MPa) 97,000 (669 MPa)Yield Strength (psi): 81,000 (561 MPa) 87,000 (600 MPa)Elongation % in 2” (50 mm): 25% 22%Approvals and Conformances: •AWS A5.18, E70C-6M H4 •AWS A5.18M, E48C-6M H4 •ASME SFA 5.18, E70C-6M H4 •ABS, 80% Ar/20% CO2, 3YSA H5 (0.045” - 1/16” diameters, flat position) •ABS, 90% Ar/10% CO2, 3YSA H5 (0.035” - 0.045” diameters, all position) •AWS D1.8/D1.8M, 75% Ar/25% CO2 [0.052” (1.4 mm) diameter] •CWB, 75-95% Ar/Balance CO2, E492C-6MJ-H4 (1.4 - 1.6 mm diameter) •CWB, 75-95% Ar/Balance CO2, E491C-6MJ-H4 (1.2 mm diameter) •EN17632-A: T 46 3 M M 3 H5 •CE Marked per CPR 305/2011 (0.9 - 1.6 mm diameter)

Part No.

Part No.

Part No.

Diameter

Diameter

Diameter

Package Size

Package Size

Package Size

S225729-014 3/32” (2.4 mm) 50 lb (22.7 kg) CoilS225719-053 1/16” (1.6 mm) 33 lb (15 kg) Vacuum Pkgd Spool S225719-070 1/16” (1.6 mm) 12 lb (5.4 kg) Vacuum Pkgd Spool S225719-082 1/16” (1.6 mm) 20 lb (9 kg) Vacuum Pkgd Spool S225724-053 0.072” (1.8 mm) 33 lb (15 kg) Vacuum Pkgd Spool S225724-070 0.072” (1.8 mm) 12 lb (5.4 kg) Vacuum Pkgd Spool S225724-082 0.072” (1.8 mm) 20 lb (9 kg) Vacuum Pkgd Spool S225725-014 5/64” (2.0 mm) 50 lb (22.7 kg) Coil S225725-053 5/64” (2.0 mm) 33 lb (15 kg) Vacuum Pkgd Spool S225725-082 5/64” (2.0 mm) 20 lb (9 kg) Vacuum Pkgd Spool

S249412-002 0.045” (1.2 mm) 60 lb (27 kg) Coil S249412-027 0.045” (1.2 mm) 50 lb (22.7 kg) Spool S249412-029 0.045” (1.2 mm) 33 lb (15 kg) Spool S249412-044 0.045” (1.2 mm) 44 lb (20 kg) Spool S249412-050 0.045” (1.2 mm) 500 lb (227 kg) Exacto-Pak S249412-075 0.045” (1.2 mm) 750 lb (340 kg) Exacto-Pak S249412-090 0.045” (1.2 mm) 900 lb (408 kg) Exacto-Pak S249415-002 0.052” (1.4 mm) 60 lb (27 kg) Coil S249415-029 0.052” (1.4 mm) 33 lb (15 kg) Spool S249415-027 0.052” (1.4 mm) 50 lb (22.7 kg) Spool S249415-044 0.052” (1.4 mm) 44 lb (20 kg) Spool S249415-050 0.052” (1.4 mm) 500 lb (227 kg) Exacto-Pak S249415-075 0.052” (1.4 mm) 750 lb (340 kg) Exacto-Pak S249419-002 1/16” (1.6 mm) 60 lb (27 kg) Coil S249419-029 1/16” (1.6 mm) 33 lb (15 kg) Spool S249419-044 1/16” (1.6 mm) 44 lb (20 kg) Spool S249419-075 1/16” (1.6 mm) 750 lb (340 kg) Exacto-Pak S249429-002 5/64” (2.0 mm) 60 lb (27 kg) Coil S249429-008 5/64” (2.0 mm) 600 lb (272 kg) Drum

S279308-029 0.035” (0.9 mm) 33 lb (15 kg) Spool S279308-050 0.035” (0.9 mm) 500 lb (227 kg) Exacto-Pak S279312-002 0.045” (1.2 mm) 60 lb (27 kg) Coil S279312-027 0.045” (1.2 mm) 50 lb (22.7 kg) Spool S279312-029 0.045” (1.2 mm) 33 lb (15 kg) Spool S279312-050 0.045” (1.2 mm) 500 lb (227 kg) Exacto-Pak S279312-075 0.045” (1.2 mm) 750 lb (340 kg) Exacto-Pak S279312-090 0.045” (1.2 mm) 900 lb (408 kg) Exacto-Pak S279315-002 0.052” (1.4 mm) 60 lb (27 kg) Coil S279315-027 0.052” (1.4 mm) 50 lb (22.7 kg) Spool S279315-029 0.052” (1.4 mm) 33 lb (15 kg) Spool S279315-050 0.052” (1.4 mm) 500 lb (227 kg) Exacto-Pak S279315-075 0.052” (1.4 mm) 750 lb (340 kg) Exacto-Pak S279315-090 0.052” (1.4 mm) 900 lb (408 kg) Exacto-Pak S279319-002 1/16” (1.6 mm) 60 lb (27 kg) Coil S279319-029 1/16” (1.6 mm) 33 lb (15 kg) Spool S279319-075 1/16” (1.6 mm) 750 lb (340 kg) Exacto-Pak


PROCOREChrome Tape Measure

AAA/0020

SAE/METRIC CHROME TAPESPart No. CTM-10, 1/2” wide blade, 10 ft./3 m.Part No. CTM-16, 3/4” wide blade, 16 ft./5 m.Part No. CTM-25, 1” wide blade, 25 ft./7.5 m.

METRIC CHROME TAPESPart No. CTM-3M, 1/2” wide blade, 3 m.Part No. CTM-5M, 3/4” wide blade, 5 m.Part No. CTM-8M, 1” wide blade, 8 m.

C.H. HANSONMarking Stamps

CHH/1561

STANDARD GRADERecommended Use: Medium to light dutyFeatures: Standard size shank for hand striking

27 PIECE LETTER SETS•Each set contains:1 of each: All letters (26 pieces A-Z), Ampersand•Tempered shanks for extra safety

440C STAINLESS STEEL STAMPS•Each letter set contains:1 of each: All letters (26 pieces A-Z), Ampersand•Each number set contains:1 of each: 0, 1, 2, 3, 4, 5, 6, 7, 8 (the 6 is used as a 9)•Withstands highly corrosive environments•Ideal for industries where cross contamination resistance are critical

“DO NOT DUPLICATE” STEEL STAMPS•1/2” x 3” long steel stampPart No. 26990, 1/16” size.Part No. 26991, 3/32” size.

“DO NOT COPY” STEEL STAMPPart No. 26992, 3/32” size.

“MASTER” STEEL STAMPPart No. 26993, 3/32” size.

9 PIECE NUMBER SETS•Each set contains:1 of each: 0, 1, 2, 3, 4, 5, 6, 7, 8 (the 6 is used as a 9)•Crowned striking surface ensures full force to the center of the stamp and textured shank provides firm easy grip

36 PIECE LETTER & NUMBER SETS•Each set contains:1 of each: All letters (26 pieces A-Z), Ampersand, 0, 1, 2, 3, 4, 5, 6, 7, 8 (the 6 is used as a 9)•Fits flat in tool boxes

PREMIER GRADERecommended Use: Ideal for prolonged industrial useFeatures: Larger shank for better impression and tempered for durability and safety

DOTOffers the most reduced stress mark by producing a character that is impressed in a dot formation. Used where reduced stress marking is required

Part No.

Part No.

Part No. Part No.Weight

Weight

Weight WeightCharacter

Size Character Size

Character Size

Shank Size

Description

Shank Size Shank SizeSTANDARD GRADE20200 1/8” 1/4” x 2-3/8” 1.48 lbs20250 3/16” 5/16” x 2-3/8” 2.14 lbs20300 1/4” 3/8” x 2-5/8” 3.17 lbsPREMIER GRADE22150 1/8” 3/8” x 2¾” 3.18 lbs22250 3/16” 7/16” x 2¾” 4.14 lbs22350 1/4” 1/2” x 3” 5.75 lbs22400 5/16” 9/16” x 3-1/8” 7.52 lbs22450 3/8” 5/8” x 3-1/8” 10.69 lbs22550 1/2” 7/8” x 4” 17.54 lbsDOT (PREMIER GRADE)26200 1/8” 3/8” x 2¾” 3.11 lbs26250 3/16” 7/16” x 2¾” 4.13 lbs26300 1/4” 1/2” x 3” 7.77 lbs26350 3/8” 5/8” x 3-1/8” 10.20 lbs

29100 1/8” Letter Set 3.18 lbs29150 1/8” Number Set 1.91 lbs29200 1/4” Letter Set 6 lbs29250 1/4” Number Set 2.02 lbs29300 3/8” Letter Set 10.69 lbs29350 3/8” Number Set 2.14 lbs

STANDARD GRADE20541 1/8” 1/4” x 2-3/8” 0.51 lbs20561 3/16” 5/16” x 2-3/8” 0.72 lbs20581 1/4” 3/8” x 2-5/8” 1.07 lbsPREMIER GRADE22861 1/8” 3/8” x 2¾” 1.07 lbs22901 3/16” 7/16” x 2¾” 1.40 lbs22941 1/4” 1/2” x 3” 1.93 lbs22961 5/16” 9/16” x 3-1/8” 2.55 lbs22981 3/8” 5/8” x 3-1/8” 3.38 lbs23021 1/2” 7/8” x 4” 6.31 lbsDOT (PREMIER GRADE)26601 1/8” 3/8” x 2¾” 1.06 lbs26621 3/16” 7/16” x 2¾” 1.40 lbs26641 1/4” 1/2” x 3” 1.94 lbs26661 3/8” 5/8” x 3-1/8” 3.34 lbs

STANDARD20624 1/8” 1/4” x 2-3/8” 2.95 lbs20625 3/16” 5/16” x 2-3/8” 3.78 lbs20626 1/4” 3/8” x 2-5/8” 5.14 lbs

29100


KUNY’STool Pouches, Holders, & Carriers

JAVELIN INDUSTRIAL Fab Tools

MILTONInflator Gauges

TAPEIndustrial Tape

KUN/2610

JAV/2562

MIL/2823

III/2680

CANVAS MESSENGER BAG•Heavy-duty canvas construction •Adjust-able waist belt with quick release buckle that can be used as a shoulder strap •Adjustable hoop and loop closure flap •Internal back wall pockets •Heavy-duty stitchingPart No. SW-725.

FIRE RETARDANT WELDERS’ UMBRELLAFits in any Javelin pipe stand. Lightweight and strong. 5.5 ft. diameter size and is able to pivot 45°.Part No. UMB.

INFLATOR TIRE GAUGEFor Truck Tires:10 - 160 psi in 2 lb. increments. 5 ft. hose that has a dual head lock-on. 6” extension with push on/lock coupling. Push-button deflator valve. Meets OSHA regulation 1910, 177 on inflation.Part No. 553.

COLOURED PVC TAPE3/4” x 66 ft. roll. Part No. COL66-BLU, Blue.Part No. COL66-BRW, Brown.Part No. COL66-GRN, Green.Part No. COL66-GRY, Grey.Part No. COL66-ORG, Orange.Part No. COL66-PUR, Purple.Part No. COL66-RED, Red.Part No. COL66-WHI, White.Part No. COL66-YEL, Yellow.


GPI®

Fuel Transfer PumpsGPI/2443

EZ-8 FUEL TRANSFER PUMPSIdeal for filling small tanks on recreational, lawn, and landscape equipment•Gas station equivalent flowrate•Extremely lightweight design for use on small tanks and barrels•Self-priming low maintenance design•Choose between direct mount or spin collar design that allows versatile mounting positions•Thermal overload protectionPart No. 137100-05, Spin Collar.Part No. 137100-01, Direct Mount.

M-180S FUEL TRANSFER PUMPSDesigned for agriculture, automotive and construction applications•18 GPM flowrate, used to fill equipment faster in mobile application•Spin collar design for versatile, end user preferred mounting positions•Extremely long life and trouble-free operation•Cast aluminum construction•Low profile design for increased visibility when used on mobile tanks in pickup trucks•Circuit breaker motor protectionPart No. 110300-2, Automatic.Part No. 110300-1, Manual.

M-1115S FUEL TRANSFER PUMPSDesigned for stationary locations in fleet, agriculture or industrial applications.•Spin collar design for versatile end user preferred mounting positions•Extremely long life and trouble-free operation•Cast aluminum construction•Internal auxiliary temperature limiting device and circuit breaker motor protectionPart No. 110000-82, Automatic.Part No. 110000-81, Manual.

M-3130 FUEL TRANSFER PUMPS30 GPM flowrate for stationary tank applications.•Weight centering inlet base includes pressure relief and easy strainer access•Field-replaceable switch and vanes•Internal auxiliary temperature limiting device motor protectionPart No. 133220-2, Auto Diesel.Part No. 133220-1, Manual.

M-3120 FUEL TRANSFER PUMPS20 GPM flowrate for stationary tank applications.•Weight centering inlet base includes pressure relief and easy strainer access•Field-replaceable switch and vanes•Internal auxiliary temperature limiting device motor protection

M-3025 & M-3425 FUEL TRANSFER PUMPSWhen reduced fueling time is critical, the highflow M-3025 delivers with up to 25 GPM.•Great for filling large capacity tanks on equipment found in construction, agriculture, mining and logging applications•Choose between two types of mount: Weight centering inlet base includes pressure relief and easy strainer access Straight base model with internal strainer•Field-replaceable switch and vanes•40 amp circuit breaker motor protection

M-150S & M-240S FUEL TRANSFER PUMPSDesigned for agriculture, automotive and construction applications•15 GPM flowrate, empties 100 gallon mobile tanks in approximately 7 minutes•Models with spin collar design offer versatile mounting positions•Extremely long life and trouble-free operation•Cast aluminum construction•Low profile design for increased visibility when used on mobile tanks in pickup trucks•Circuit breaker motor protection

SPECIFICATIONS:Flowrate (GPM / LPM): 8 / 30Voltage: 12-volt DCType: Rotary GearDuty Cycle (On / Off): 15 min. / 30 min.Power Cord: 15 ft. (4.6 m) x 14/2 AWGInlet / Outlet Size: 3/4” / 3/4”Dispensing Hose: 10 ft. (3.0 m) x 5/8”Suction Pipe: Trim-to-Fit

SPECIFICATIONS:Flowrate (GPM / LPM): 18 / 69Voltage: 12-volt DCType: Rotary GearDuty Cycle (On / Off): 30 min. / 30 min.Power Cord: 18 ft. (5.5 m) 12/2 AWGInlet / Outlet Size: 1” / 1”Dispensing Hose: 12 ft. (3.7 m) x 1”Suction Pipe: Telescoping to 40”Mount Spin: CollarNozzle Holder: Lockable

SPECIFICATIONS:Flowrate (GPM / LPM): 12 / 45Voltage: 115-volt ACType: Rotary GearDuty Cycle (On / Off): 30 min. / 30 min.Inlet / Outlet Size: 1” / 3/4”Dispensing Hose: 12 ft. (3.7 m) x 3/4”Suction Pipe: Telescoping to 40”Mount: Spin CollarNozzle Holder: Lockable

SPECIFICATIONS:Flowrate (GPM / LPM): 30 / 114Voltage: 115/230-volt ACType: Carbon VaneDuty Cycle (On / Off): 30 min. / 30 min.Inlet / Outlet Size: 1¼” / 1”Nozzle Holder: LockableDispensing Hose: 12 ft. (3.7m) x 1”Inlet Mount: Center BaseThread: NPT

SPECIFICATIONS:Flowrate (GPM / LPM): 20 / 76Voltage: 115-volt ACType: Carbon VaneDuty Cycle (On / Off): 30 min. / 30 min.Inlet / Outlet Size: 1” / 1”Nozzle Holder: LockableDispensing Hose: 12 ft. (3.7 m) x 1”Inlet Mount: Center Base

SPECIFICATIONS:Flowrate (GPM / LPM): 15 / 57Voltage: 12-volt DC / 24-volt DCType: Rotary GearDuty Cycle (On / Off): 30 min. / 30 min.Power Cord: 18 ft. (5.5 m) 12/2 AWGInlet / Outlet Size: 1” / 3/4”Dispensing Hose: 12 ft. (3.7 m) x 3/4” OR 10 ft. (3 m) 3/4”Suction Pipe: Telescoping to 40” OR Trim-to-Fit

SPECIFICATIONS:Flowrate (GPM / LPM): 25 / 95Voltage: 12-volt DC / 24-volt DCType: Carbon VaneDuty Cycle (On / Off): 30 min. / 30 min.Inlet / Outlet Size: 1” / 1”Nozzle Holder: LockablePower Cord: 18 ft. (5.5 m) OR 15 ft. (4.6 m) of 10/3 AWGDispensing Hose: 18 ft. (5.5 m) x 1” OR 12 ft. (3.7 m) x 1”

Part No.

Part No.

Voltage

Voltage

Nozzle

Nozzle

Suction Pipe

Inlet Mount

NozzleHolder

Power Cord

Power Cord

Hose

Hose

Mount110000-100 12V Automatic Lockable 18 ft. Telescoping 12 ft. Spin Collar110000-99 12V Manual Lockable 18 ft. Telescoping 12 ft. Spin Collar110000-107 12V Manual Standard 18 ft. Trim-to-Fit 10 ft. Direct Mount110000-70 24V Manual Lockable 18 ft. Telescoping 12 ft. Spin Collar

133265-04 12V Auto Diesel 18 ft. 18 ft. Center Base133265-03 12V Manual 18 ft. 18 ft. Center Base133240-2 12V Auto Diesel 15 ft. 12 ft. Straight Base133240-1 12V Manual 15 ft. 12 ft. Straight Base133260-02 24V Auto Diesel 15 ft. 12 ft. Straight Base133260-01 24V Manual 15 ft. 12 ft. Straight Base

Part No. Nozzle Hose133200-33 Auto Diesel 1”133200-2 Auto Leaded 3/4”133200-34 Manual Leaded 1”133200-1 Manual Leaded 3/4”

Please consult a Gregg's Representative for additional information about GPI and accessories


GPI®

Fuel Transfer PumpsGPI/2443/2447

M-150S COMBO FUEL TRANSFER SYSTEMSDesigned for agriculture, automotive and construction applications•Combo includes the low profile FM-200 meter and M-150S Pump•Spin collar design offers versatile mounting positions•Extremely long life and trouble-free operation•Cast aluminum construction•Low-profile design for increased visibility when used on mobile tanks in pickup trucks•Meter available in litre modelPart No. 110610-14, Automatic nozzle.Part No. 110610-12, Manual nozzle.

M-180S COMBO FUEL TRANSFER PUMPS•This combo special includes the M-180S pump, a filter, a filter adapter, and a Filter Installation Kit •This pump and filter combo makes installation quick and easy •Explosion proof motor • ToUse With: Gasoline, Up to 15% alcohol blends such as E15, diesel fuel, Up to 20% biodiesel blends such as B20, and kerosenePart No. 110612-02, Automatic nozzle.Part No. 110612-01, Manual nozzle.

CABINET MODEL FUEL TRANSFER SYSTEMSFor fleet operations, golf courses and equipment yards•Choose a 115-volt or 230-volt pump. Both deliver up to 20 GPM (76 LPM)•Includes MR 5-30 mechanical meter with twist knob reset and large readout•Includes tank adapter for easy installation•Nozzle holder and hanger accommodates most gas and diesel nozzles (manual, automatic and vapor recovery)•Hose and nozzle sold separately•Powder-coated exterior improves corrosion resistance•Performs well in salt-spray environments•Accessories come with stainless steel hardwarePart No. 143620-02, 115V.Part No. 143620-05, 230V.

Choose the Remote DispenserIncludes: Dispenser, Nozzle Holder, Solenoid Valve and MR 5-30 MeterPart No. 143650-02, Litre units.

Purchase the 20 or 30 GPM pump that best meets your needs.

Part No. 133200-10, Flowrate (GPM / LPM): 20 / 76, Voltage: 115-volt AC.Part No. 133220-05, Flowrate (GPM / LPM): 30 / 114, Voltage: 115- or 230-volt AC.

Add the correct Vacuum Breaker Kit for your pump

Part No. 13353302.Part No. 13353303.

Finish your installation with the proper accessories

Part No. 143500-07, Mounting shelf kit.Part No. 133511-02, Cabinet Base.Part No. 906005-501, 1” Auto diesel nozzle.Part No. 110121-8, 3/4” Automatic unleaded nozzle.

REMOTE DISPENSER FUEL TRANSFER PUMPSAssemble a system that will provide ground-level access to your meter and nozzle on above ground tanks in 4 easy steps.

M-3120 & M-3130 COMBO FUEL TRANSFER SYSTEMSDesigned for Stationary Tank Applications where high flow and long life are desired•Factory assembled GPI Combos are available with the M-3120 or M-3130 pump and include the MR 5-30 meter. Meter is calibrated in litres.•Internal auxiliary temperature limiting device motor protection•Weight centering inlet base includes pressure relief and easy strainer access•Field-replaceable switch and vanes•Tank adapter included

SPECIFICATIONS:Flowrate (GPM / LPM): 15 / 57Voltage: 12V DCType: Rotary GearDuty Cycle (On / Off): 30 min. / 30 min.Power Cord: 18 ft. (5.5 m) x 12/2 AWGInlet / Outlet Size: 1” / 3/4”Dispensing Hose: 12 ft. (3.7 m) x 3/4”Suction Pipe: Telescoping up to 40”Nozzle Holder: LockableInlet Mount: Spin Collar

SPECIFICATIONS:Flowrate (GPM / LPM): 20 / 76Voltage: 115-volt AC or 230-volt ACType: Carbon VaneDuty Cycle (On / Off): 30 min. / 30 min.Inlet / Outlet Size: 1” / 1”Inlet Mount: 2”

SPECIFICATIONS:Voltage: 12 Volts DCMechanical Connection: 1” Inlet / 1” OutletFlowrate: Up to 18 GPM / 69 LPMDuty Cycle: 30 minutes On / 30 minutes OffHose: 12 ft (3.7 m) x 1” diameterPower Cord: 18 ft (5.5 m) 12/2 AWGSuction Pipe: Adjustable to 40”

Part No. 133600-62, Auto Leaded.Part No. 133600-61, Manual.

SPECIFICATIONS:Flowrate (GPM / LPM): 20 / 76Voltage: 115-volt ACType: Carbon VaneDuty Cycle (On / Off): 30 min. / 30 min.Inlet / Outlet Size: 1” / 1”Dispensing Hose: 12 ft. (3.7 m) x 3/4”

Part No. 133601-61, Auto Diesel.Part No. 133601-60, Manual.

SPECIFICATIONS:Flowrate (GPM / LPM): 30 / 114Voltage: 115- or 230-volt ACType: Carbon VaneDuty Cycle (On / Off): 30 min. / 30 min.Inlet / Outlet Size: 1¼” / 1”Dispensing Hose: 12 ft. (3.7 m) x 1”

3 41

2


133200-10

110121-8

133511-02906005-501

13353302


GPI®

Speciality PumpsGPI/2443

AVIATION PUMPSAviation Pumps & Meters are only intended to be ground-based or vehicle mounted. Do not use or mount in or on the aircraft.For use with: Aviation gasoline (AVGAS 100LL) and kerosene grade (JET A). User should consult NFPA 407 Standard for Aircraft Fuel Servicing for safety requirements during ground fuel servicing of aircraft using liquid petroleum fuels. This product has no actual or implied compli-ance with this standard.

METHANOL PUMPS•Designed for the growing alternative fuels market•Industry uses include oil and gas and racing•Compatible with ethanol

HEAVY-DUTY OIL PUMPS•Specifically designed for use with high viscosity fluids.•Consider the viscosity of the fluid and temperature range when choosing the oil pump for your application•For use with: Oil (up to 90W), waste oil, hydraulic fluid, anti-freeze and non-flammable oil-based solvents. Do not use with gasoline or diesel fuel.

LIGHTWEIGHT OIL PUMPS•Designed specifically for use with thin to medium viscosity petroleum fluids and up to 30W oil.•Lightweight design is easy to move between barrels and drums.•Do not use with gasoline, diesel fuel or waste oil.

12V CHEMICAL PUMPSRecommended Use:•#118000-2: Medium/Thick Chemicals (10 to 450 centipoise viscosity). Do not use with gasoline, diesel fuel or micro-encapsulated chemicals.•#118000-1: Thin Chemicals (0 to 10 centipoise viscosity). Do not use with gasoline, diesel fuel or micro-encapsulated chemicals.

115V CHEMICAL PUMPSRecommended Use:•#118003-2: Medium/Thick Chemicals (10 to 450 centipoise viscosity). Do not use with gasoline, diesel fuel or micro-encapsulated chemicals.•#118003-1: Thin Chemicals (0 to 10 centipoise viscosity). Do not use with gasoline, diesel fuel or micro-encapsulated chemicals.

Aviation Combo Part No. 133240-202, Comes with #133240-200 and 126300-202.Part No. 133600-201, Comes with #133600-200 and 126300-201.Part No. 133601-202, Comes with #133601-200 and 126300-202.

Aviation PumpPart No. 110000-200, 12V, Flowrate (GPM / LPM): 15 / 57.Part No. 133240-200, 12V, Flowrate (GPM / LPM): 25 / 95Part No. 133600-200, 115V, Flowrate (GPM / LPM): 20 / 76Part No. 133601-200, 115/230V, Flowrate (GPM / LPM): 30 / 114

Meter Part No. 126300-202, Litre.

Specifications137700-01

137700-01

110700-01

110700-01

Part No.110700-04

110700-04

Model No. EZ-8 M-150S M-1115SFlowrate (GPM / LPM) 8 / 30 15 / 57 12 / 45Voltage 12V DC 12V DC 115V DCType Gear Gear GearDuty Cycle (On / Off) 15 min. / 30 min. 30 min. / 30 min. 30 min. / 30 min.Inlet / Outlet Size 3/4” / 3/4” 1” / 3/4” 1” / 3/4”Inlet Mount Spin Collar Spin Collar Spin CollarHousing Nickel Plated Nickel Plated Nickel Plated

Part No.

Part No.

Part No.

Part No.

Flowrate

Flowrate

Flowrate

Flowrate

Voltage

VoltagePower Cord

Power Cord

Power Cord

Includes

Includes

142100-03 16 QPM / 15 LPM 12V DC None142100-01 16 QPM / 15 LPM 115/230V AC 3 ft. (.91m)142100-02 32 QPM / 30 LPM 115/230V AC 3 ft. (.91m)

118000-9 8 GPM / 30 LPM 12V DC 15 ft. (4.6 m) of 10/3118003-11 8 GPM / 30 LPM 115V AC 3 ft. (.91m)

118000-2 8 GPM / 30 LPM 15 ft. 2” Union Ring118602-10 8 GPM / 30 LPM 15 ft. Tote-a-Pump Assembly118000-1 12 GPM / 45 LPM 20 ft. 2” Union Ring

118003-2 8 GPM / 30 LPM 2” Union Ring118602-12 8 GPM / 30 LPM Tote-a-Pump Assembly118003-1 12 GPM / 45 LPM 2” Union Ring118602-11 12 GPM / 45 LPM Tote-a-Pump Assembly

SPECIFICATIONS:Type: GerotorNozzle: 3/4”. Ball ValveDuty Cycle (On / Off): 30 min. / 30 min.Inlet / Outlet Size: 1”. / 3/4”Inlet Mount: Center BaseDispensing Hose: 8 ft. (2.5 m) x 3/4”Suction Pipe :Trim-to-FitHousing: Aluminum

SPECIFICATIONS:Type: GearNozzle: 1” Ball ValveDuty Cycle (On / Off): 30 min. / 30 min.Inlet / Outlet Size: 1” / 1”Inlet Mount: Spin CollarDispensing Hose: 12 ft. (3.7 m) x 1”Suction Pipe: Telescoping to 40”Housing: Polypropylene

SPECIFICATIONS:Voltage: 12-volt DCType: GearDuty Cycle (On / Off): 30 min. / 30 min.Inlet / Outlet Size: 1” / 1”Inlet Mount: Direct MountHousing: Plastic

SPECIFICATIONS:Voltage: 115-volt ACType: GearDuty Cycle (On / Off): 30 min. / 30 min.Power Cord: 3-Prong Grounded PlugInlet / Outlet Size: 1” / 1”Housing: Plastic


142100-01

118602-10

118000-9

118003-2

MOTORMOTOR

UL RECOGNIZED COMPONENT


DISPENSE COUPLERS•Use with single-use, disposable/ recyclable containers•Reusable – durable stainless steel construction provides years of servicePart No. 118450-52, Keyed System. Connects to EPV 3A orange container valve.Part No. 118450-53, Diesel exhaust fluid 4-pin keyed system. Connects to RSV container valve.

DEF PUMP KIT•Lever action pump•Designed for drums up to 36”•Nozzle, dispensing and suction hoses includedPart No. 118450-33.

BARREL BRACKETPart No. 118450-51.

BUILD YOUR OWN DEF BARREL SYSTEM•Closed systems are designed to maintain consistent product purity•Use with closed valves

CLOSED TOTE SYSTEMS•Universal Design to work with most totes•Kits include all parts needed to dispense product•Powder coated shelf for universal cage mounting

DEF METERPart No. 120000-32.

HP-100 HAND PUMPS•Lever action piston pump with lockable handle•Dual-flo® handle provides high volume and low volume settings.•Pumps fluid on both the push and pull strokes for fast delivery.•Built-in anti-siphon valve•For Use with: Gasoline, diesel fuel, kerosene, medium oil (up to 30W) and hydraulic fluidPart No. 114000-5, Thermoplastic nozzle.Part No. 114000-10, Metal nozzle.

HP-90 HAND PUMP•Lever action piston pump•Pumps fluid on both the push and pull strokes for fast delivery•Built-in anti-siphon valve•For Use with: Gasoline, diesel fuel and kerosene. Light oil (up to 10W) and hydraulic fluidPart No. 131000-1, Thermoplastic nozzle.

DP-20 HAND PUMPS•Lever action diaphragm pump with lockable handle•Can be used for dirty or contaminated fluids•For Use with: Gasoline, diesel fuel, kerosene, medium oil (up to 30W) and hydraulic fluidPart No. 138000-01, Buna-N® hose.Part No. 138000-02, U.L. Listed hose.

Part No. Power Cord Voltage118450-30 Three-prong connector 115V AC118450-32 20 ft. with Clamp Kit 12V DC

SPECIFICATIONS:Flowrate (GPM / LPM): Up to 50 Gal / 189 Litres per 100 StrokesType: PistonInlet / Outlet Size: 1” / 3/4”Tank Fitting: 2”Dispensing Hose: 8 ft. (2.5 m) x 3/4”Suction Pipe: Telescoping to 40”

SPECIFICATIONS:Flowrate (GPM / LPM): 25 / 95 per 100 StrokesType: PistonInlet / Outlet Size: 1” / 3/4”Tank Fitting: 2”Dispensing Hose: 8 ft. (2.5 m) x 3/4”Suction Pipe: Trim-to-Fit

SPECIFICATIONS:Flowrate (GPM / LPM): 20 / 76 per 100 StrokesType: DiaphragmNozzle: ThermoplasticInlet / Outlet Size: 1” / 3/4”Tank Fitting: 2”Dispensing Hose: 8 ft. (2.5 m) x 3/4”Suction Pipe: Telescoping to 40”

GPI®

DEF Pumps & Meter

Hand Pumps

GPI/2444-47

Choose the correct coupler for your closed container valve

Purchase your DEF pump kit Mount with barrel bracket1 2 3

SPECIFICATIONS:Flowrate: 1 pint per strokeNozzle: Ball ValveInlet / Outlet Size: 3/4” / 1” hose barbDispensing Hose: 72” Clear Tubing

SPECIFICATIONS:Flowrate (GPM / LPM): 12 / 45Type: GearNozzle: Automatic Stainless SteelDuty Cycle (On / Off): 30 min. / 30 min.Inlet / Outlet Size: 1” / 1”Dispensing Hose: 12 ft. x 3/4”Suction Hose: 60”Mounting Bracket: Tote BracketMicro Matic Coupler: RSV

SPECIFICATIONS:Construction | Type: PBT Polyester - Electronic DiscFlow Range (GPM / LPM): 2-20 / 7-76Thread Size: 1” Powered By: One alkaline 9 Volt batteryAccuracy: +/– 2% of reading Pressure Rating: 50 PSIField Calibration: YesDisplay: 6-digit LCD


118450-52118450-53


GPI®

Hand Pumps

Meters

GPI/2444/2445

RP-10 HAND PUMP•Rotary action pump with lockable handle for security•Built-in anti-siphon valve•For Use with: Gasoline, diesel fuel, kerosene, medium oil (up to 30W) and hydraulic fluidPart No. 123000-06.

RP-5 HAND PUMP•Basic, rotary action pump•For Use with: Petroleum based fluids having a flash point above 38°C (100°F). Diesel fuel and kerosene. Light oil (up to 10W) and hydraulic fluid. Do not use with gasoline.Part No. 129003-1.

BP-12 HAND PUMP•Lever action piston pump•Convenient lever handle on a barrel pump•For Use with: Lightweight petroleum products, oils, antifreeze and kerosene.Part No. 129010-1.

MR 5-30 MECHANICAL FUEL METERS•Versatile mounting positions with included inlet/outlet fittings•Rotatable register for desired flow direction•Batch and cumulative display•Compatible with Pulser Kit #126517-05 (sold separately)•Liter unitsPart No. 126300-02, 3/4” Thread.Part No. 126300-04, 1” Thread.Part No. 126300-06, 1½” Thread.

FM-100 & FM-200 MECHANICAL FUEL METERS•Factory calibrated•The FM100 has a built-in filter that protects equipment being fueled•For Use with: Gasoline, Gasohol, diesel fuel and kerosene. Do not use with water or chemicals.•Liter units

FM-100 SeriesPart No. 111200-19, 3/4” Thread.Part No. 111200-10, 1” Thread.

FM-200 SeriesPart No. 111200-21, 3/4” Thread.Part No. 111200-13, 1” Thread.

DR 5-30 DIGITAL FUEL METERS•Preprogrammed for seven different units of measure: Barrels (42 g), Imperial Gallons, Litres, Ounces, Pints, Quarts and US Gallons•Front panel access to batch reset and field calibration•Provides an open collector signal to customer supplied remote device•For Use with: Gasoline, diesel fuel and kerosene. Do not use with water or chemicals.Part No. 126300-11, 3/4” Thread.Part No. 126300-12, 1” Thread.Part No. 126300-13, 1½” Thread.

BP-10 HAND PUMP•Basic plunger action pump•Removable spout for garden hose attachment•For Use with: Petroleum products such as light oil (up to 10W), transmission fluid and hydraulic fluid.Part No. 129020-1.

CP-5 HAND PUMP•Plunger action piston pump•Very portable and requires no special tools to install. Slips into a five gallon pail.•For Use with: Hydraulic fluids, transmission fluids or motor oilsPart No. 129002-1.

LP-50 HAND PUMP•Lever action pump•Works with drums up to 36 in.•For Use with: Water, Antifreeze, Diesel Fuel, Petroleum BasedProducts, Mild Detergents, Lubricants and most Ag Chemicals. Not for use with kerosene, Roundup® Concentrate or Flam-mable Fluids.Part No. 129000-1.

SPECIFICATIONS:Flowrate (GPM / LPM): 10 / 38 per 100 RevolutionsType: RotaryNozzle: MetalInlet / Outlet Size: 1” / 3/4”Tank Fitting: 2”Dispensing Hose: 8 ft. (2.5 m) x 3/4” with Static WireSuction Pipe: Telescoping to 40”

SPECIFICATIONS:Flowrate (GPM / LPM): 8 / 30 per 90 RevolutionsType: RotaryNozzle: SpoutTank Fitting: 2”Suction Pipe: Three-Piece Metal

SPECIFICATIONS:Flowrate: Up to 1 Pint per StrokeType: PistonNozzle: SpoutTank Fitting: 2”Suction Pipe” Telescoping to 36”

SPECIFICATIONS:Flowrate: Up to 1.5 Pints per StrokeType: PistonNozzle: SpoutTank Fitting: 2”Suction Pipe: Telescoping to 36”

SPECIFICATIONS:Flowrate: Up to 8 Ounces per StrokeType: PistonNozzle: Clear tubing

SPECIFICATIONS:Flowrate: Up to 1 Pint per StrokeType: PistonNozzle: SpoutTank Fitting: 2”Suction Pipe: Telescoping to 36”

SPECIFICATIONS:Construction | Type: Aluminum - Nutating DiscFlow Range (GPM / LPM): 5 to 30 / 19 to 114Accuracy: +/– 2% of readingPressure Rating: 50 PSI (3.4 bar)Field Calibration: Yes

SPECIFICATIONS:Construction: AluminumType: Mechanical Nutating DiscFlow Range (GPM / LPM) :4 to 20 / 15 to 76Accurac:y +/– 2% of readingPressure Rating: 50 PSI (3.4 bar)Field Calibration: YesDisplay: Max. Batch total: 4-digits Cumulative total: 5-digits (gallons) / 6-digits (liters)

SPECIFICATIONS:Construction: AluminumType: Nutating DiscFlow Range (GPM / LPM): 5 to 30 / 19 to 114Powered By: Four AA BatteriesAccuracy: +/- 2.00% Factory Calibration +/- 1.00% Field CalibrationPressure Rating: 50 PSI (3.4 bar)Field Calibration: YesCertifications: U.L. 913, Intrinsically Safe for Class I, Division 1, Group D. U.L. 25, Meters for Flammable and Combustible Liquids.



01A SERIES DIGITAL FUEL METER•Compact and lightweight at just 12 oz.•Mount directly to the nozzle for easy reading•Includes 3/4” reducer fitting and 3/4” x 1½” pipe fitting•Litre unitPart No. 113255-2, 1” Thread.

LM51DN OIL METER•Gallons, litres, pints or quarts display•Designed with oval rotors for optimum accuracy•For use with: Engine oils, transmission fluid (maximum viscos-ity SAE 140) or antifreeze. Do not use with excessively dirty fluids or fluids with particles without installing a filter.Part No. LM51DN.

LM-300 OIL METER•For Use with: Motor oil, gear oil, hydraulic oil, antifreeze, ATF and waste oil. Do not use with flammable fluids or antifreeze that exceeds 50% water.Part No. 120000-28.

FM-100H CHEMICAL METER•Keeps both Batch and Cumulative totals.•For Use with: Most herbicides and other chemicals compatible with meter materials. Do not use with water.•Litre unitsPart No. 111200-16, 1” Thread.

CABINET MODEL ACCESSORIESPart No. 133170-01, Pedestal Kit: includes base, 2” x 24” pipe and 2” NPT coupler.

DEF ACCESSORIESPart No. 906008-03, Automatic Nozzle. Stain-less Steel 3/4” hose barb inlet.Part No. 906008-02 Manual Nozzle. Polypro-pylene, Stainless Steel 3/4” hose barb inletPart No. 906008-04, Ball Valve Nozzle 1” hose barb inlet.Part No. 118450-61, 6 ft. DEF Tubing 1”x 6 ft.Part No. 118450-62, 12 ft. DEF Hose 3/4” x 12 ft.Part No. 118450-63, 20 ft. DEF Hose 3/4”x 20 ft.

FUEL FILTER KITSPart No. 906006-52, Cast Iron Adapter: 3/4” NPT for 18 GPM - 14 UNF.Part No. 906004-88, Cast Iron Adapter: 1” NPT for 18 GPM, 1 - 12 UNF.Part No. 129420-01, Cast Iron Adapter: 1” NPT for 18 GPM, 1-3/8 - 12 UNF.Part No. 906005-67, Aluminum Adapter: 1” NPT for 30 and 40 GPM, 1-½ - 16 UNF.

FUEL FILTER KITSPart No. 133527-01, 3/4”. Includes: 3/4” NPT cast iron adapter, 10 micron filter, and 3/4” x 4” nipple.Part No. 133537-01, 1”. Includes: 1” NPT alu-minum filter adapter 1 1/2 - 16 UNF, 30 micron particulate filter, 1” NPT x 7” galvanized pipe nipple, 1” NPT x 3” galvanized pipe nipple, 1” NPT x 1.5” (Close) galvanized pipe nipple, 1” NPT galvanized street elbow, and 1” NPT galvanized elbow.

FM-300H CHEMICAL METER•Electronic display keeps Batch and Cumulative totals. Mounts easily on hose end, pump or fluid transfer system.•For Use with: Fertilizers, oil, pesticides and water. Do not use with gasoline, diesel or flammable liquids.•Litre/Imperial Gallon unitsPart No. 120000-2.

01N WATER METER•Compact and lightweight at just 12 oz.•Mount directly to the nozzle for easy reading•For Use with: Water•Litre unitsPart No. 113255-5.

TM SERIES WATER METER•Sturdy construction with easy access to internal parts.•For Use with: Water or mild chemicals

SPECIFICATIONS:Construction: AluminumType: TurbineFlow Range (GPM / LPM): 3 to 30 / 10 to 100Powered By: Two alkaline AAA batteriesAccuracy: +/– 5.0% of readingPressure Rating: 300 PSIField Calibration: NoCertifications: FM Approved as Intrinsically Safe for Class I, Division 1 Groups A thru G. U.L. classified to Canadian Standards. ATEXAN-NEX VIII. CE.

SPECIFICATIONS:Construction: AluminumType: Oval GearFlow Range (GPM / LPM): 0.26 to 7.8 / 1 to 30 @ 5-1,000 cpsPowered by: Lithium BatteryAccuracy: +/– 0.5% of readingPressure Rating: 1500 PSIThread Size: 1/2” NPTField Calibration: NoUnits: Gallon / Litre

SPECIFICATIONS:Construction: PBT PolyesterType: Nutating DiscFlow Range (QPM / LPM): 8 to 80 / 7.5 to 76Inlet/Outlet: 1” (3/4” Bushings Included)Powered By: One alkaline 9 Volt batteryAccuracy: +/– 2% of readingPressure Rating: 50 PSIField Calibration: YesUnits: Gallons, Quarts, Litres & Ounces

SPECIFICATIONS:Construction: AluminumType: Mechanical Nutating DiscFlow Range (GPM / LPM): 4 to 20 / 15 to 76Accuracy: Factory: +/– 2% of reading Field: +/– 1% of readingPressure Rating: 50 PSI (3.4 bar)Field Calibration: YesDisplay: 4-digits

SPECIFICATIONS:Construction | Type: PBT PolyesterType: Nutating DiscFlow Range (GPM / LPM): 2 to 20 / 7 to 76Thread Size: 1”Powered By: One alkaline 9 Volt batteryAccuracy: Factory: +/– 2% of reading Field: +/– 0.5% of readingPressure Rating: 50 PSI (3.4 bar)Field Calibration: YesDisplay: Maximum value is 999,999 (x 100)

SPECIFICATIONS:Construction: NylonType: Electronic DigitalFlow Range (GPM / LPM): 3 to 30 / 10 to 100Thread Size: 1”Powered By: Two alkaline AAA batteriesPressure Rating: 150 PSIField Calibration: NoDisplay: 4-digit LCD

SPECIFICATIONS:Construction: Schd. 80 PVCType: TurbinePowered By: Two lithium batteriesAccuracy: +/– 3.0% of readingPressure Rating: 225 PSIField Calibration: YesDisplay: 6-digit LCDUnits: Gallon / Litre

GPI®

Meters

Accessories

GPI/2444/2447

Specifications TM050-N TM075-N TM100-N TM150-N TM200-NSize 1/2” 3/4” 1” 1½” 2”Flow Rate (GPM) 1-10 2-20 5-50 10-100 20-200


906008-03

118450-63906004-88

906005-67

133527-01


GPI®

AccessoriesGPI/2447

FUEL FILTERSPart No. 129300-01, Particulate Filter: (18 GPM/67 LPM) 10 micron, 1 - 12 UNF.Part No. 129340-02, Particulate Filter: (18 GPM/67 LPM) 10 micron, 1 - 12 UNF. Includes DraincockPart No. 129340-01, Particulate Filter: (18 GPM/67 LPM) 10 micron, 1-3/8 - 12 UNF. Includes DraincockPart No. 129320-01, Particulate Filter: (30 GPM/113 LPM) 10 micron, 1 ½ - 16 UNF.Part No. 129300-02, Water & Particulate Filter: (18 GPM/67 LPM) 10 micron, 1 - 12 UNF.Part No. 129320-02, Water & Particulate Filter: (30 GPM/113 LPM) 10 micron, 1½ - 16 UNF.Part No. 129340-04, Water & Particulate Filter: (Bio-Tek®) (25 GPM/95 LPM) 2 micron, 1 - 12 UNF.Part No. 129340-05, Water & Particulate Filter: (Bio-Tek®) (40 GPM / 151 LPM) 2 micron, 1½ - 16 UNF.

HYDRAULIC FILTERSPart No. 129922-01, 10 micron.Part No. 129923-01, 25 micron.

HOSE & NOZZLE KITFor HP-100 and RP-10 Series.Part No. 114504-3.

CONVERSION & OVERHAUL KITIncludes: Two gears, Drive key and replace-ment seals for the gear cover motor shaft (use motor shaft seal to convert existing pump to B100 compatible), Poppet, Strainer, and Switch cover plate.Part No. 110504-1.

KITSPart No. 13750005, Overhaul Kit for EZ-8: Motor shaft key, two gears and a set of replacement seals.Part No. 114505-2, Overhaul Kit for HP-100 Hand Pump: Piston ring, three seals, packing seals and liner.Part No. 123503-1 Overhaul Kit for RP-10 Rotary Hand Pump: Vanes, springs, O-rings and gasket.Part No. 133504-1, Seal Kit: Four replacement seals.Part No. 133503-1, Shaft Seal Kit: Retaining ring, shaft seal and spacer washer.Part No. 133501-1, Vane Kit: Shaft key, eight 1.25” vanes and one seal.Part No. 133502-1, Vane Kit: Shaft key, eight 2” vanes and one seal.

METER ACCESSORIESPart No. 113520-1, Battery Replacement Kit: (For 03 and TM Series meters) Two lithium bat-teries.Part No. 116000-1, Calibration Container: 5 Gallon (Do not use for fuel.)Part No. 906004-85, Computer Cover: (For 03 and TM Series meters) Single Access Port.Part No. 906004-86, Computer Cover: (For 03 and TM Series meters) Dual Access Port.Part No. 126530-09, MR 5-30 Series Seal Kit: Two fitting O-rings and a housing O-ring.Part No. 111506-2, FM-100 Series Overhaul Kit: Replacement seals and O-rings.Part No. 901002-52, Meter O-ring: Seals the computer to the turbine housing. Fits Meter Models 01 and 03.Part No. 126517-05, Pulser Kit for MR 5-30: 115-volt AC.

PUMP ACCESSORIESPart No. 110527-1, Battery Clamp Kit.Part No. 133263-01, Battery Clamps: Heavy Duty.Part No. 110909-1, Bung Adapter Kit: 2” NPT bung adapter.Part No. 133511-02, Cabinet Base Assembly.Part No. 906001-4, Pressure Vent Cap Assembly.Part No. 906004-62, Replacement Cap: (For Vent Cap Assembly).Part No. 11080801, Security Collar: Plastic.Part No. 11081801, Security Collar: Aluminum.Part No. 110905-1, Shear Key Kit: Shear key for any gear pump.Part No. 110243-01, Suction Pipe: Steel, Adjustable from 22 to 40”.Part No. 110100-1, Suction Pipe: Plastic, Adjustable from 22 to 40”.Part No. 115527-2, Suction Pipe Extension Kit: 15” (38 cm).Part No. 110531-01, Switch Kit: (Fits M-120, M-150, M-1100, M-150S, M-180S, M-240S models).Part No. 121231-1, Tank Adapter: 2” x 1” FNPT.Part No. 121231-5, Tank Adapter: 2” x 1¼” FNPT.

REMOTE DISPENSER PUMPS & BREAKER KITSPart No. 133514-01, Pump Vapor Recovery Kit.Part No. 143500-07, Shelf Kit: For the MR 5-30 Remote Dispenser unit.Part No. 13353302, Vacuum Breaker Kit: For M-3120.Part No. 13353303, Vacuum Breaker Kit: For M-3130.

NOZZLE ACCESSORIESPart No. 906004-598, Automatic Leaded Nozzle (U.L. Listed): 3/4” NPT, curved spout for M-3120.Part No. 110121-8, Automatic Unleaded Nozzle: 3/4” NPT, straight spout for M-150S, M-180S, M-240S, and M-1115S Series.Part No. 906001-506, Manual Leaded Nozzle: 3/4” NPT, straight spout for M-3120 pump.Part No. 110155-4, Manual Leaded Nozzle: 1 in. NPT for M-180S.Part No. 906001-10, Manual Leaded Nozzle: 1” NPT, straight spout for M-3130 pump.Part No. 110155-1, Manual Unleaded Nozzle: 3/4” NPT for M-150S, M-240S and M-1115S Series.

HERBICIDE KITIncludes: Hose, Ball Valve Nozzle, and Adjust-able Suction Pipe for 2” bung.Part No. 111502-2.


114505-2

133501-1

110155-4

110527-1

110909-111080801

121231-5


RIDGID®

Red Wet/Dry Vacuum CleanersRID/3337

4 GALLON PORTABLE WET/DRY VAC - 4000RV•Powerful 5.0 Peak Horsepower - High performance wet/dry vacuum in a compact package. •Longer motor life - Durable, long-lasting motor backs industry’s best warranty •Cord-Wrap/Large Handle •Rugged Polypropylene Drum Construction •4 Gallon Drum •Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 8 ft. hose has a smooth interior surface to reduce clogging and can be stored on-board.•Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc.•Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners

Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 8 ft. Premium Locking Pro Hose, Car Nozzle, Noise Muffler/Diffuser, and Fine Dust Filter.

Part No. 50313.

6 GALLON WET/DRY VAC - 6000RV•Incredible 4.25 Peak Horsepower - High performance wet/dry vacuum•Longer motor life - Durable, long-lasting motor backs industry’s best warranty•360º Caster Wheels•Accessory Storage - Keeps accessories organized and close by for easy access•Large Handle•Rugged Polypropylene Drum Construction•10 ft. power cord for extended reach. •6 Gallon Drum •Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 8 ft. hose has a smooth interior surface to reduce clogging and can be stored on-board. •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners

Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 8 ft. Premium Locking Pro Hose, Utility Nozzle, and Standard Filter.

Part No. 50308.

12 GALLON WET/DRY VAC - 1200RV•Powerful 5.0 Peak Horsepower - High performance wet/dry vacuum•Longer motor life - Durable, long-lasting motor backs industry’s best warranty •360º Caster Wheels• Accessory Storage - Keeps accessories organized and close by for easy access•Cord-Wrap/Large Handle•Rugged Polypropylene Drum Construction•12 Gallon Drum•Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 8 ft. hose has a smooth interior surface to reduce clogging and can be stored on-board. •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large Drain - Located to lowest point of drum for emptying of water•Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners

Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 8 ft. Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, Car Nozzle, and Standard Filter.

Part No. 50323 .

4.5 GALLON PROPACK® WET/DRY VAC - 4500RV•5.0 Peak Horsepower - High performance wet/dry vacuum•Longer motor life - Durable, long-lasting motor backs industry’s best warranty.•Unique Design - Stores hose, accessories and 20 ft. power cord inside the vac keeping every-thing organized and close at hand•Large Cushioned Handle•Flat top work surface•Rugged Polypropylene Drum Construction•4.5 Gallon Drum •1-7/8” ultra-flexible locking hose - Won’t pull loose during use, and the 2 ft. compact hose extends to 7 ft.•Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners.

Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 2 to 7 ft. Expanding Hose, Utility Nozzle, Dusting Brush, Crevice Tool, and Fine Dust Filter.

Part No. 50318.


14 GALLON WET/DRY VAC with CART - 1400RV•Powerful 6.0 Peak Horsepower - High performance wet/dry vacuum •Longer motor life - Durable, long-lasting motor backs industry’s best warranty •Sturdy Cart, Push Handle and Large Rear Wheels - Allows the vac to travel easily up/down stairs and over rough terrain and thresholds•Accessory Storage Bag•Cord-Wrap/Large Handle •2-Piece Rugged Polypropylene Drum Construction•14 Gallon Drum • Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac•Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 8 ft. hose has a smooth interior surface to reduce clogging. •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large Drain - located to lowest point of drum for emptying of water•Qwik Lock® Filter Fastening System - Makes installing or remov-ing your filter quick, easy, and secure without tools or fasteners

Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 8 ft. Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, Crevice Tool, Car Nozzle, and Fine Dust Filter

Part No. 50348.

16 GALLON WET/DRY VAC with DETACHABLE BLOWER - 1620RV•Detachable Blower - The high performance vacuum has an integrated detachable blower for maximum versatility. This is 2 tools in 1. •Top of the line 6.5 Peak Horsepower - High performance wet/dry vacuum provides optimum power•Longer motor life - Durable, long-lasting motor backs industry’s best warranty •360º Caster Wheels•Accessory Storage Caddy •Quick Release Cord-Wrap - The cord-wrap not only stores the 20 ft. power cord, but the tab rotates to quickly release the cord •2-Piece Rugged Polypropylene Drum Construction•16 Gallon Drum •Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac•Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 8 ft. hose has a smooth interior surface to reduce clogging. •Large Drain - Located to lowest point of drum for emptying of water•Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners

Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 8 ft. Premium Locking Pro Hose, Locking Blowing Wand, Utility Nozzle, Wet Nozzle, Car Nozzle, and Fine Dust Filter

Part No. 50343.

16 GALLON STAINLESS STEEL WET/DRY VAC with CART - 1610RV•Top of the line 6.5 Peak Horsepower - High performance wet/dry vacuum provides optimum power•Longer motor life - Durable, long-lasting motor backs industry’s best warranty •Sturdy Cart, Push Handle & Large Rear Wheels - Allows the vac to travel easily up/down stairs and over rough terrain and thresholds •Accessory Storage Bag•Cord-Wrap/Large Handle•Stainless Steel Drum Construction - Attractive stainless steel construction provides professional appearance•16 Gallon Drum•Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac•Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 8 ft. hose has a smooth interior surface to reduce clogging. •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc.•Large Drain - Located to lowest point of drum for emptying of water•Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners.

Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 8 ft. Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, Crevice Tool, Car Nozzle, and Find Dust Filter.

Part No. 50353.

14 GALLON 2-STAGE WET/DRY VAC with CART - RV2400A•11.5 Amp Motor - Drives two blower wheels to optimize suction and deliver industry-leading performance •2-Stage Motor - Creates powerful “high-lift” suction and more efficient air flow. Result – more suction power and quieter operation •Longer motor life - Over 700 hours on average •Sturdy Cart, Push Handle & Large Rear Wheels - Allows the vac to travel easily up/down stairs and over rough terrain and thresholds •Accessory Storage Bag •Cord-Wrap/Large Handle •2-Piece Rugged Polypropylene Drum Construction •14 Gallon Drum •Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac •Professional Locking Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 10 ft. hose has a smooth interior surface to reduce clogging •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large Drain - Located to lowest point of drum for emptying of water •Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy, and secure without tools or fasteners

Includes: Vacuum, Owner’s Manual, (2) Extension Wands, 1-7/8” x 10 ft. Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, Floor Brush, Crevice Tool, Muffler/Diffuser, and Fine Dust Filter

Part No. 50358.

RIDGID®



RIDGID®


16 GALLON 2-STAGE WET/DRY VAC - RV2600B•11.5 Amp Motor - Drives two blower wheels to optimize suction and deliver industry-leading performance. •2-Stage Motor - Creates powerful “high-lift” suction and more efficient air flow. Result – more suction power and quieter operation. •Longer motor life - Over 700 hours on average •Sturdy Cart, Push Handle & Large Non-Marring Wheels - Allows the vac to travel easily up/down stairs and over rough terrain. •Accessory Storage Bag •Cord-Wrap/Large Handle •2-Piece Rugged Drum Construction •16 Gallon Drum •Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac. •Professional Locking Hose - The hose won’t pull loose during use, and is 4x more durable than our standard hose. •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large built-in drain - Drain located to lowest point of drum for emptying of water.

Includes: Vacuum, Owner’s Manual, (2) Steel Extension Wands, 1-7/8” x 10 ft. Premium Locking Pro Hose, Floor Tool with 3 inserts (Floor Nozzle, Squeegee, & Carpet Cleaning Nozzle), Multipurpose Nozzle, Crevice Tool, Muffler/Diffuser, and Fine Dust Filter.

Part No. 50363.

16 GALLON MOTOR-ON-BOTTOM WET/DRY VAC - 1650RV•Motor on Bottom Design makes accessing filter and emptying drum cleaner and easier•Foot-Activated Switch •6.5 peak Horsepower motor - With nearly 25% more power than previous models•Quick-Access Debris Door - Allows users to dump larger debris into the drum and continue working•Qwik Lock® Filter Fastening System - Makes installing or removing your filter quick, easy and secure without tools or fasteners•Longer motor life - Durable, long-lasting motor backs the industry’s best warranty•Sturdy Cart, Push Handle and Large Rear Wheels - Allows the vac to travel easily up/down stairs and over rough terrain•Accessory Stretch Caddy - Keeps accessories close by and locked in when emptying•Large Handle•Cord-hook - Keeps the 20 ft. power cord with ALCI outlet neatly stored on-board•2-Piece Rugged Drum Construction•16 Gallon Drum•Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac. Additionally with the motor on the bottom motor noise is hampered. •Professional Locking Hose - The hose won’t pull loose during use, and is 4x more durable than our standard hose•Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large built-in drain - Drain located to lowest point of drum for emptying of water

Includes: Vacuum, Owner’s Manual, 2 Extension Wands, 1-7/8” x 8’ Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, Crevice Tool, Car Nozzle, Noise Muffler/Diffuser, Fine Dust Filter

Part No. 50338.

14 GALLON SMART PULSE™ WET/DRY VAC - RV3410•Self Cleaning Filter - Reduce face loading with the Dual PTFE filters and differential pressure to clean the filter. •11.5 Amp Motor - Drives two blower wheels to optimize suction and deliver industry-leading performance. •2-Stage Motor - Creates powerful “high-lift” suction and more efficient air flow. Result – more suction power and quieter operation. •Longer motor life - Over 700 hours on average. •Sturdy Cart, Push Handle & Large Rear Wheels - Allows the vac to travel easily up/down stairs and over rough terrain. •Cord-Wrap/Large Handle •Spin welded Rugged Drum Construction •14 Gallon Drum •Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac. •Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large built-in drain - Drain located to lowest point of drum for emptying of water. •Premium Locking Pro Hose - The ultra-flexible hose won’t pull loose during use, and is 4x more durable than our standard hose. This 1-7/8” x 15 ft. hose has a smooth interior surface to reduce clogging.

Includes: Vacuum, Owner’s Manual, 2 PTFE coated filters, 1-7/8” x 15 ft. Locking Hose

Part No. 50373.

14 GALLON HEPA-CERTIFIED WET/DRY VAC - RV2400HF•Meets EPA’s definition of a HEPA vacuum under RRP rule for lead paint renovations•The certified HEPA filter is 99.97% efficient at filtering particulates down to 0.3 microns in size•11.5 Amp Motor - Drives two blower wheels to optimize suction and deliver industry-leading performance•2-Stage Motor - Creates powerful “high-lift” suction and more efficient air flow. Result – more suction power and quieter operation.•3 Layers of Filtration - Disposable high-efficiency filter bags collect larger debris. Then a wash-able fabric filter cover captures particles down to 0.5 microns. The certified HEPA filter then captures the smallest particulates down to 0.3 microns. •Longer motor life - Over 700 hours on average •Sturdy Cart, Push Handle and Large Rear Wheels - Allows the vac to travel easily up/down stairs and over rough terrain•Accessory Storage Bag •Cord-Wrap/Large Handle •2-Piece Rugged Drum Construction•14 Gallon Drum•Sound Reduction Technology - Scroll Noise Reduction® is a patented feature that provides quiet operation by precisely controlling the flow of air through the vac•Professional Locking Hose - The hose won’t pull loose during use, and is 4x more durable than our standard hose•Blowing capacity - Use to blow leaves from walkways or decks, and debris from job sites, tools, etc. •Large built-in drain - Drain located to lowest point of drum for emptying of water

Includes: Vacuum, Owner’s Manual, 2 Extension Wands, 1-7/8” x 10 ft. Premium Locking Pro Hose, Utility Nozzle, Wet Nozzle, 14” Floor Brush, Crevice Tool, Muffler/Diffuser, Filter Bag, Cloth Pre-Filter, Certified HEPA filter,”Beater Bar” turbo brush.

Part No. 50368.

What is Smart Pulse™?The Smart Pulse™ vac is designed with two filters and an integrated sensor. The sensor is continuously monitoring suction efficiency. When a pressure difference inside the vac vs. the outside of the filter is recognized by the sensor, the vac begins an alternat-ing pulsing cycle, back-flushing air through the filter. This process cleans the filter automatically, yet only when needed, providing uninterrupted performance and maximizing efficiency.


STABILicers™ HEELProvides superior traction in the critical heel zone, and features a fully integrated tension fit system that secures firmly to boots and shoes. The heel-only design is ideal for driving, and when the job calls for repeated indoor/outdoor transitioning. Lightweight and extremely durable, they’re easy to take on and off, and store easily in a glove box or coat pocket. Adjustable strap allows for one size to fit most applications, and can be shared amongst multiple users and work crews. Replaceable cleats mean affordable, ongoing use - season after season.Part No. 700-00, Heel with Steel Cleats.Part No. 700B-00, Heel with Brass Cleats.

SNAP & SPRAY GUN•Offers more durability, comfort, and control when spraying and transforms any spray can into a spray gun •E-Z Pull FullGrip Trigger - eliminates finger fatigue •Up to 8x easier to spray than the leading competition •Improves accuracy and control •Lightweight and easy to use with glovesPart No. K07091000.

MATERIAL4X® FASTFIT® GLOVE•Form-fitting TrekDry® material helps keep hands cool and comfortable •Quick-fit elastic cuff provides a secure fit with easy on/off flexibility •Reinforced thumb and index finger provide added durability •Perforated back-of-hand allows for added ventilation •Seamless Material4X® microfiber abrasion resistance and greater tear resistance than standard synthetic glovesPart No. MF4X-75-008, Small/size 8.Part No. MF4X-75-009, Medium/size 9.Part No. MF4X-75-010, Large/size 10.Part No. MF4X-75-011, X-large/size 11.Part No. MF4X-75-012, 2X-large/size 12.

32 NORTHSTABILicers™ — Traction Gear

GANDER BRANDTIG (Tungsten Inert Gas) Gloves

MECHANIX WEAR®

Professional Gloves

MMM/1173

GAN/2305

MMM/2724

Heavy duty deer split - with wide cuff and back hand patch on left hand only.Part No. 1525-9, Size 9.Part No. 1525-10, Size 10.Part No. 1525-11, Size 11.Part No. 1525-12, Size 12.

KRYLONPaint Products

KIMBERLY-CLARKPaper/Wiping Products

KRY/3662

KIM/1735

DESCRIPTION COLOUR SIZEW x L

UNITS PER CASE

COUNT PER ROLL/PKG.PLYPART NO.

WASHROOM PRODUCTSBathroom Tissue:17713 KLEENEX® Cottonelle® Standard Roll White 2 4.09 x 4.0” 451 60


ERGODYNE®

Squids™ Hard Hat Lanyard

ACCUFORM SIGNS®

Safety Tags

DANGEROUS GOODSPlacards

TARGET TECHIncandescent Beacons

ERG/2094

ACF/1222

QQQ/2489

TAR/2198

ELASTIC HARD HAT LANYARD WITH CLAMP•Comfortably attaches to hard hats and other headwear •Easy release clamp attaches securely to just about anything •Comfortable high stretch elastic material •Hi-Vis lime Part No. 3155.

5¾” x 3¼”, Cardstock.Part No. TSS103CTP.

5¾” x 3¼”, Cardstock.Part No. TSS101CTP.

5¾” x 3¼”, Cardstock.Part No. TRS318CTP. 6¼” x 3”, 250 per roll.

Part No. TAR125.

NON-REFLECTIVE DECALS - NUMBEREDSTYRENE PLACARDS Part No. PSN-2-1072, Class 2, 1072, (oxygen, compressed).Part No. PSN-2-1075, Class 2, 1075, (liquefied petroleum gases, petroleum gases, liquefied).Part No. PSN-3-1202, Class 3, 1202, (diesel fuel, fuel oil, gas oil, heating oil light).Part No. PSN-3-1203, Class 3, 1203, (gasoline, motor spirit, petrol).Part No. PSN-3-1230, Class 3, 1230, (methanol).Part No. PSN-3-1267, Class 3, 1267, (petroleum crude oil).Part No. PSN-3-1268, Class 3, 1268, (petroleum distillates, N.O.S., petroleum products, N.O.S.Part No. PSN-3-1863, Class 3, 1863, (fuel, aviation, turbine, engine).Part No. PSN-3-1993, Class 3, 1993, (flammable liquid, N.O.S.).Part No. PSN-3-2924, Class 3, 2924, (flammable liquid, corrosive, N.O.S.).Part No. PSN-3-3494, Class 3, 3494, (sour crude).Part No. PSN-8-1760, Class 8, 1760, (corrosive liquid, N.O.S.).

FireBolt® LED BEACONS - SAE J845 CLASS IIThe Firebolt Class 2 LED model offers (14) selectable flash patterns through Federal Signal’s patented Power Select™ feature. The Power Select allows users to scroll through flash patterns by simply following a sequence of applying power to the unit 3 times in a row which will put the beacon into programming mode.The shatterproof, polycarbonate dome and base includes an o-ring to help protect against moisture •Built-in permanent ½” pipe mount base

•FireBolt, 12-24 VDC - Magnetic mount with cigarette plugPart No. 220260-02, Amber.Part No. 220260-03, Blue.5.10”W

3.60”H

3494


PRONGHORNBooster Cables

PCR/3304

Booster Cable ClampsPart No. 25-5520, 1 pair blister card, 200 amp Standard Clamp.Part No. 25-5545, 1 pair blister card, 400 amp HD Coated Parrot.Part No. 25-5550, 1 pair blister card, 500 amp Super HD Coated Elongated.Part No. 25-5560, 1 pair blister card, 800 amp Super HD Coated Elongated.Part No. 25-5581, 1 pair blister card, 800 amp Super HD Epoxy Coated.Part No. 25-5583, 1 pair blister card, 800 amp Super HD Coated Elongated with Spring Guard.Part No. 25-5555, 1 pair blister card, 500 amp HD Coated Parrot.

ARCTIC INDUSTRIAL 100% COPPER BOOSTER CABLES•Professional booster cables, with ”no tangle” twin line construction •Packaged in a Hard Case • -50°C Rating

QUICK CONNECT INDUSTRIAL HEAVY DUTY 100% COPPER BOOSTER CABLES•Professional booster cables, with ”no tangle” twin line construction •Packaged in a Hard Case •Includes a 5 ft. harness lead and quick connect ends allowing for permanent mounting options• -40°C Rating

COPPER CLAD ALUMINUM (CCA) BOOSTER CABLES•More economical applications where maximum conductivity is not required•“No tangle” twin line construction•Packaged in a canvas bag• -40°C Rating

INDUSTRIAL HEAVY DUTY 100% COPPER BOOSTER CABLES•Professional booster cables, with “no tangle” twin line construction •Packaged in a Canvas Bag • -40°C Rating

25-5585

25-5555

25-5520

25-5545

25-5550

Clamp Type

Clamp Type

Clamp Type

Clamp TypeClamps

Clamps

Clamps

ClampsPart No.

Part No.

Part No.

Part No.25-0091 1/0 gauge 30 ft. 900 amp HD Solid Copper Parrot Clamps25-0092 1/0 gauge 25 ft. 900 amp HD Solid Copper Parrot Clamps25-0093 1/0 gauge 20 ft. 900 amp HD Solid Copper Parrot Clamps25-0094 1/0 gauge 16 ft. 900 amp HD Solid Copper Parrot Clamps25-0095 1/0 gauge 12 ft. 900 amp HD Solid Copper Parrot Clamps

25-0100 1 gauge 30 ft. 800 amp HD Epoxy Coated Clamps25-0400 4 gauge 20 ft. 500 amp HD Parrot Clamps

25-0413 4 gauge 16 ft. 400 amp Standard Clamp25-0611 6 gauge 12 ft. 300 amp Standard Clamp25-0811 8 gauge 10 ft. 200 amp Standard Clamp25-0911 10 gauge 10 ft. 150 amp Standard Clamp

25-0201 2 gauge 25 ft. 500 amp HD Coated Elongated 25-0202 2 gauge 20 ft. 500 amp HD Coated Elongated25-0203 2 gauge 16 ft. 500 amp HD Coated Elongated25-0401 4 gauge 20 ft. 500 amp HD Coated Elongated25-0402 4 gauge 20 ft. 500 amp HD Coated Parrot25-0403 4 gauge 16 ft. 500 amp HD Coated Elongated25-0404 4 gauge 16 ft. 500 amp HD Coated Parrot25-0405 4 gauge 12 ft. 400 amp Standard Clamp25-0601 6 gauge 12 ft. 400 amp Standard Clamp25-0801 8 gauge 12 ft. 200 amp Standard Clamp

Gauge

Gauge

Gauge

GaugeLength

Length

Length

Length

CMYK: C5 M25 Y90 K0

CMYK: C45 M35 Y100 K0

100% black

100% black

PMS: 151CCMYK: C0 M62 Y91 K0

CMYK: C5 M25 Y90 K0

CMYK: C45 M35 Y100 K0

100% black

100% black

CMYK: C5 M25 Y90 K0

CMYK: C45 M35 Y100 K0

100% black

0% black


Quick ConnectorsCONNECTOR KITS•Kits includes 2 solid copper silver plated contacts and housing •Header card •Bagged

2/0 350 25-5608 25-5606 —1/0 175 25-5614 25-5612 —2 175 25-5618 — 25-56164 175 25-5622 — 25-56206 50 — 25-5626 —10 - 12 50 — 25-5628 —

AmpGrey

Part No.Red

Part No.Blue

Part No.Gauge

(may not be exactly as illustrated)

(may not be exactly as illustrated)


PRONGHORNQuick Connectors

FASTER®

Flat Face Couplings — High Pressure

BAFFINColorado Boot

PCR/3304

FST/2155

BAF/1305

CONNECTOR CONTACTS•Silver plated solid copper contacts •Sold as pairs •Header card •Bagged

PROTECTIVE CAPS•Black PVC Material •Header card •BaggedPart No. 25-5672, 350 amps.Part No. 25-5674, 175 amps.Part No. 25-5676, 50 amps.

CONNECTOR HOUSINGS•Header card •Bagged

2/0 350 25-56521/0 175 25-56542 175 25-56564 175 25-56586 50 25-566010 - 12 50 25-5662

350 25-5632 25-5630 —175 25-5636 25-5634 25-563850 — 25-5640 —

Gauge Part No.Grey

Part No.Red

Part No.Blue

Part No. AmpAmp

Features: •Connection by screwing together the two parts • Disconnection by pulling back the female safety sleeve and unscrew •Shut off by flat valve •Connectable with male part under residual pressure (35 MPa - 5075 PSI) without using tools •Disconnection under pres-sure allowed •Interchangeability according to Faster internal Standards •No spillage during connection and disconnection •Female part equipped with axial rotation adapters •Mating threads heat treated and made to Rd profile • High volume flow and reduced pressure drop is ensured by specially designed components

•FEMALE: high grade steel carbonitrited wearing parts. MALE: high grade carbon steel induction hardened.•Polyurethane and NBR Backup ring in PTFE• -25°C to 100°C temperature range •100,000 cycles at max rated working pressure disconnected – 1,000,000 cycles at max. rated working pressure connected

Technical Specifications:

Male Female SizeDash Inch

Thread Size Max. Working PSI

FEMALE NPTFHV-12-34-NPT-M FHV-12-34-NPT-F -12 3/4” 3/4-14 F. NPT 6,650FHV-16-114-NPT-M FHV-16-114-NPT-F -16 1” 1¼-11½ F. NPT 5,075FHV-24-112-NPT-M FHV-24-112-NPT-F -24 1½" 1½-11½ F. NPT 5,075FEMALE ORBFHV-12-34-SAE-M FHV-12-34-SAE-F -12 3/4” 1-1/16-12 F. ORB 6,650FHV-16-1-SAE-M FHV-16-1-SAE-F -16 1" 1-5/16-12 F. ORB 5,075FHV-24-114-SAE-M FHV-24-114-SAE-F -24 1½" 1-7/8-12 F. ORB 5,075

•Temperature Rating: -40C/-40F •Liner: Removable, multi-layer inner boot system •Base: Arctic Rubber Shell, EVA midsole, Polar Rubber Outsole •Locking snow collar •Diamond-weave, 900 Denier nylon upper •Multi D-Ring lace fastening

REAC-M011-BK1-7 7REAC-M011-BK1-8 8REAC-M011-BK1-9 9REAC-M011-BK1-10 10REAC-M011-BK1-11 11REAC-M011-BK1-12 12REAC-M011-BK1-13 13REAC-M011-BK1-14 14

SizePart No.

2 colour, reversed

30% Screenof Pantone 313

Pantone 313 Pantone 200 Pantone 281(preferred

background)

3 colour

Pantone 313 Pantone 200 Pantone 281

(use this logo only when logo is small or printing process dictates)

(use this logo only when logo is small or printing process dictates)

12298 FNLBaffinLogoEN.ai

CMYK: C5 M25 Y90 K0

CMYK: C45 M35 Y100 K0

100% black

100% black


CMYK: C5 M25 Y90 K0

CMYK: C45 M35 Y100 K0

100% black

100% black

CMYK: C5 M25 Y90 K0

CMYK: C45 M35 Y100 K0

100% black

0% black

PMS: 151CCMYK: C0 M62 Y91 K0 EATON AEROQUIP

High Pressure HoseAER/1037

EC210 WINNER® DOUBLE WIRE BRAID HOSE - SAE 100R2AT TYPE S, EN853, 2SNConstruction: Synthetic rubber tube, two wire braid reinforcement, and black syn-thetic rubber cover MSHA approved.Application: For hydraulic system service with petroleum and water-based fluids for general industrial service.Temperature Range: -40°C to 100°C

Part No.O.D.Hose I.D. Max Operating Pressure Min. Burst Pressure Min. Bend Radius Weight

Dash inchmm mm bar bar mm kg/minch psi psi inch lb/ftEC210-4 -4 6.4 0.25 15.0 0.59 400 5,800 1,600 23,200 100.0 3.94 0.38 0.26EC210-6 -6 9.5 0.38 18.9 0.74 330 4,800 1,320 19,200 130.0 5.12 0.54 0.36EC210-8 -8 12.7 0.5 22.2 0.87 275 4,000 1,100 16,000 180.0 7.09 0.64 0.43EC210-12 -12 19.0 0.75 29.2 1.15 215 3,125 860 12,500 240.0 9.45 0.93 0.62EC210-16 -16 25.4 1.00 37.2 1.46 165 2,400 660 9,600 300.0 11.81 1.29 0.87EC210-20 -20 31.8 1.25 47.3 1.86 125 1,800 500 7,200 420.0 16.54 1.89 1.27EC210-24 -24 38.1 1.50 53.7 2.11 90 1,300 360 5,200 500.0 19.69 2.10 1.41EC210-32 -32 50.8 2.00 66.7 2.63 80 1,150 320 4,600 630.0 24.80 2.76 1.85

23 L

OC

AT

ION

S:

Items may not be exactly as illustrated. Quantities on some items may be limited. Errors are subject to correction. ©2015 Gregg Distributors Ltd. All rights reserved.

www.greggdistributors.ca

ALBERTAEDMONTON - MAIN

16215-118 Ave., T5V 1C7Ph: 780-4-GREGGS or 447-3447

Fax: 780-451-2528

EDMONTON - EAST3611 - 76 Ave., T6B 2S8

Ph: 780-450-2233 Fax: 780-450-2266

EDMONTON - SOUTH3911 - 92 St., T6E 6R8

Ph: 780-409-2000 Fax: 780-409-2100

NISKU1405 - 5 St., T9E 8C7

Ph: 780-979-9988 Fax: 780-979-9989

ACHESON101-53016 Hwy 60, T7X 5A7

Ph: 780-948-7111 Fax: 780-948-7222

ATHABASCA5006 - 52 St., T9S 1V3

Ph: 780-675-3110 Fax: 780-675-4774

CALGARY - MAIN5755 - 11 St. S.E., T2H 1M7

Ph: 403-253-6463 Fax: 403-253-5926

CALGARY - FOOTHILLS6130 - 51 St. S.E., T2C 4M9

Ph: 403-203-1928 Fax: 403-236-1912

CLAIRMONT9802 - 84 Ave., T0H 0W0

Ph: 780-567-2238 Fax: 780-567-2239

DRAYTON VALLEY6105 - 50 Ave., Box 5055, T7A 1R3

Ph: 780-621-0056 Fax: 780-621-0057

FAIRVIEW9402 - 113 St., Box 2020, T0H 1L0

Ph: 780-835-5115 Fax: 780-835-3535

FORT MCMURRAY325 MacAlpine Crescent, T9H 4Y4

Ph: 780-715-4000 Fax: 780-743-8833

GRANDE PRAIRIE11140 - 97 Ave., T8V 3J8

Ph: 780-513-4000 Fax: 780-513-6000

HIGH LEVEL10207 - 96 St., T0H 1Z0

Ph: 780-926-2521 Fax: 780-926-3514

LETHBRIDGE4005 - 5 Ave. N., T1H 6Y3

Ph: 403-328-7333 Fax: 403-328-7666

RAINBOW LAKE2 Rainbow Drive, Box 823, T0H 2Y0

Ph: 780-956-2588 Fax: 780-956-2589

RED DEER5141 - 76A Street Close, T4P 3M2

Ph: 403-341-3100 Fax: 403-341-3210

SPIRIT RIVER5202 Highway 49, Box 579, T0H 3G0

Ph: 780-864-3333 Fax: 780-864-3330

STRATHMORE1020 Westridge Road, T1P 1H8

Ph: 403-934-3710 Fax: 403-934-5453

BRITISH COLUMBIAFORT ST. JOHN

9404 - 111 St., V1J 7J5Ph: 250-785-8000 Fax: 250-785-8022

LANGLEY19632 - 96 Ave., V1M 3B9

Ph: 604-888-9588 Fax: 604-888-4688

NANAIMO1935 Boxwood Rd., V9S 5X9

Ph: 250-754-1935 Fax: 250-754-1165

SASKATCHEWANSASKATOON

3066 Faithfull Ave., S7K 8H2Ph: 306-343-6655 Fax: 306-343-6656

Coming Soon!

Now Open!

supplement catalogue 2015 - gregg distributors · pdf filesupplement catalogue miller

Documents