storth have used their experience of slurry management … have used their experience of slurry...

Storth have used their experience of Slurry Management and extensive market research to develop a range of Umbilical Slurry Systems. Aimed at the modern day farmer and contractor the objective is to provide a complete slurry solution from farm to field.

UmbilicalSlurry SystemsExperts in Slurry Management

STORTHStoneleigh Park, Station Road, Holme, Nr Carnforth, Lancashire, LA6 1HR.

Tel: 0044 1524 781 900 Email: [email protected]

Manufactured in the UK

www.storthmachinery.co.uk

STORTH2

Centrifugal Chopper PumpCentrifugal Chopper Pumps were invented in 1950, designed for the treatment of livestock slurry and the processing of waste from industrial plants. The development incorporated a knife system designed to allow pumps to handle fluids with higher solid content.

Today, numerous manufacturers provide Centrifugal Chopper Pumps to the agricultural market. Storth’s philosophy is to supply and fully support the most suitable pump for your application depending on material viscosity, horsepower availability, pressure and flow requirements. With this in mind Storth offer a range of pump options.

Nova ST100Storth have used their extensive knowledge and experience of slurry pumps to develop the Nova ST100. A split gearbox/pump housing design gives added security to the mechanical seal and makes the gearbox incredibly secure. Developed to suit farmers and medium size contractors, the Nova ST100 combines low power requirement with efficient performance.

Cri-Man 80 Series Partners from day one, Cri-Man offer one of the most aggressive chopping mechanisms in the market. The PTH80K and 80KK have twin chrome steel inlet blades which cut at a rate of 170 times per minute. Secondary chopping is conducted by the 380mm diameter impeller and reverse impeller housing. Installed by many of Storth’s large umbilical operators, the Cri-Man has proven itself both reliable and effective.

Bauer SX1000This is the most recent addition to the Storth stable due to its reputation for performance and reliability. A unique spiral draw chopping mechanism integral to the impeller, provides an initial chop followed by the secondary impeller to reverse impeller housing cut. The system provides a smooth and consistent power draw, couple this with the Austrian brand’s support and it is clear why so many users operate the SX Centrifugal Chopper Pump.

Nova ST100

Cri-Man 80k

Power Requirement (Hp) 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200

Nova ST100

Cri-Man PTH80K

Bauer SX1000

Cri-Man PTH80KK

Capacity (m3/h) 0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320

Nova ST100

Cri-Man PTH80K

Bauer SX1000

Cri-Man PTH80KK

Head (m) 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 0

Nova ST100

Cri-Man PTH80K

Bauer SX1000

Cri-Man PTH80KK

EXPERTS IN SLURRY MANAGEMENT 3

Centrifugal Chopper PumpStorth Centrifugal Chopper Pumps come as standard on a fully galvanised robust 3-point linkage frame complete with hydraulic primer, 4.5m of 6” suction hose and PTO with shear bolt protection. Three pumping pipe systems are available “Farmer Plus”, “Contractor” or “Contractor Plus”.

Farmer Plus ConnectionTechnical Details• Galvanised swan neck pipe

• Primer coupling

• 3/4” air introduction ball valve

• 4” manual ball valve

• Bauer 4” male couplingPrimer Coupling

Contractor ConnectionTechnical Details• Galvanised “U” pipe

• Primer coupling

• Hydraulic gate valve

• ”T” pipe with 4” manual ball valve

• Sponge ball chamber

• Blank cap/compressor coupling

• Bauer 4” male coupling.

• Optional 90° Bauer 4” coupling

Contractor Plus ConnectionTechnical Details• Galvanised “UT” pipe

• Primer coupling

• 2 hydraulic gate valves

• ”T” pipe with 4” manual ball valve

• Sponge ball chamber

• Blank cap/compressor coupling

• Bauer 4” male coupling

• Optional 90° Bauer 4” coupling

• Optional 360° swivel joint coupling 90° 4”Male –

4” Female Coupling

Sponge Ball Chamber

Blank Cap/Comp Coupling

Hydraulic Gate Valve

STORTH4

Hose ReelersLay Flat Hose is one of the largest economical outlays in the umbilical system. Its storage, transportation and management are the key elements in any umbilical system. Storth have developed a range of hose handling systems designed to facilitate the pumping of slurry from store to field in the most efficient way.

Fully galvanised as standard (including the powder coated side panels), the range offers machines to suit either farmer or contractor, starting with the 400m Farmer Bobbin Reeler up to the 2000m Trailed Reeler. Using a combination of Reelers on the front and back of the tractor enables one tractor to carry up to 3000m of hose.

Farmer Bobbin ReelerAvailable with carrying capacities from 400m through to 1000m, the Farmer Bobbin Reeler (FBR) can be mounted at the front or rear of a tractor, or in combination with a Farmer Twin Spreader Bar. Constructed around a robust 80mm box section frame, the FBR come with a standard female A-frame mounting. Reeler drive comes courtesy of a hydraulic drive motor and heavy duty 1” chain driven. Bobbin Reel dividers are available as an option for those who want to partition off specific hoses.

Contractor Bobbin ReelerHeavy Duty (HD) female A-frame with 3-point linkage mounting set the tone for the top of the range Contractor Bobbin Reelers. The cleverly engineered frame design ensures maximum stability and strength for the Bobbin and its heavy duty hydraulic gearbox drive. Carrying capacities of 600–1000m are available with 4”, 5” or 6” hose considered.

Model Weight MountingReeler

CapacityHydraulic Width Height

Farmer BR 400

Farmer BR 800

Farmer BR 1000

440kg

455kg

470kg

Standard A-frame

400m

800m

1000m

1 DA

1.35m

2.15m

2.15m

1.50m

1.50m

1.65m

Contractor BR 600-800

Contractor BR 1000

485kg

500kg

HD A-frame

& 3-Point

800m

1000m1 DA 2.25m

1.45m

1.53m

Hydraulic Gear Box Drive Engineered Frame Contractor Bobbin Reeler 1000m

Farmer Bobbin Reeler 800m

55mm Axle


Model Weight MountingReeler

CapacityHydraulic Width Height

Mounted Reeler 1000 750kg

HD A-frame

& 3-Point

1000m

1 DA

1.80m 1.90m

Mounted Reeler 1200 765kg 1200m 1.85m 1.95m



Technical Details• Robust build quality

• Fully galvanised c/w powder coated side panels

• Heavy Duty format A-frame & 3-point linkage

• Robust hydraulic gearbox drive

• 55mm reel stub axle diameter

• Full width hub trough

• Hose guide roller

• LED lighting kit

• Heavy Duty male A-frame option

• Rotary speed control valve option

• Working light kit option

• Tool box option

Piggy-Back Mounted 1200m Reeler

Hose Guide RollerHydraulic Gear Box Drive

Full Width Hose Couple Trough

Rotary Speed Control Valve

LED Light

Mounted ReelerDesigned to take the hard work out of hose laying and retrieval, Storth Mounted Reelers build on the Bobbin Reelers solid foundations with full machine galvanising and Heavy Duty construction as standard. A powerful hydraulic gearbox drive is at the heart of the machines with cross line relief protection and optional rotary valve control giving maximum efficiency and long maintenance and Heavy Duty construction as standard.

The dual purpose mounting design allows the Mounted Reelers to be used either directly with a tractor 3-point linkage or as part of a piggy-back system using the Heavy Duty male A-frame option.

Rear mounted rotary speed control and working light kit options are available for those seeking to improve machine durability. Extra storage is also available on request via a tool box option.

STORTH6

Trailed ReelerIdeal for contractors offering long distance slurry handling, Storth Heavy Duty Trailed Reelers are fully galvanised and available in 1000m, 1500m or 2000m spools holding 4” or 5” hose (+5” available on request).

Hydraulic brakes, 550/60x22.5 flotation tyres complete with mudguards and LED road lighting ensure you meet road traffic regulations, guaranteeing operator safety and peace of mind.

The mudguard mounted rotary speed control valve enhances operator control during hose retrieval via the twin tension guide rollers. Other standard features include Heavy Duty gearbox drive, tool box and towing drawbar tongue.

Model Reeler Capacity Hydraulic Width Height

Trailer Reeler 1000 1545m

1 DA 2.85m

2.55m

Trailer Reeler 1500 1700m 2.75m

Trailer Reeler 2000 1855m 3.00m


• Fully galvanised c/w powder coated side panels

• Heavy Duty chassis

• Hydraulic brakes

• 550/60X22.5 flotation tyres

• Robust hydraulic gearbox drive

• 55mm reel stub axle diameter

• Full width hose end trough

• Twin hose tension roller c/w guide

• LED lighting kit

• Rotary speed control valve

• Tool box

• Optional hydraulic drawbar offset

• Optional steps & handrail

• Optional working light

Trailed Reeler 2000m

Twin Hose Tension Rollers

Hydraulic Drawbar Hydraulic Brakes


Lay Flat HoseThe Storth reputation is built on robust build quality and intuitive design, with these principles in mind, Snap-Tite was chosen as our Lay Flat Hose partner. The decision focused attention on premium grade polyurethane hose, manufactured of circular woven polyester fabric stocking completely encapsulated by polyurethane elastomer. This process is known as weave extrusion and gives numerous advantages over rubber.

Couple the technical properties with the Snap-Tite 10 year limited warranty and it becomes obvious why Storth chose both polyurethane and Snap-Tite.

Super-X Delivery HoseThis is manufactured specifically for Storth. Super-X in its distinctive red colouring, is made using unique construction methods and high grade PolyVinyl Chloride (PVC). Specifically designed to be durable, flexible and tolerant, Super-X achieves various technical benefits.

The Super-X Delivery Hose is available for retro-fitting to all makes of dribble bar applicators on umbilical spreading set-ups.

Technical Details• Non-snaking or kinking

• UV & O-Zone resistant

• Abrasion & impact resistance

• Cut & tear resistance

• Temperature range -40°C to 80°C

• High load capacity in tension and compression

• Flexibility

• Resistance to water, oil & grease

• Performance in harsh environments

• Mould, mildew & fungus resistance

Technical Details

Snap-Tite Hose X-Section

Super-Ex Hose

Super-Ex Hose

Snap-Tite Woven Polyester Fabric

• Increased flexibility

• Reduced cracking

• Reduced kinking

• Improved O-Zone tolerance

• UV protected

Super-Ex Hose Snap-Tite Lay Flat Hose

STORTH8

Spreader BarsDesigned to provide the simplest method of slurry application, Storth Spreader Bars are available in spread widths of 10m (Single Outlet) up to 12m (Twin Outlet). With accurate adjustment, the bars provide low level spread patterns with large droplets ensuring even distribution of slurry and reduced drift, minimising environmental odour nuisance.

Built of high quality materials, Storth Spreader Bars are galvanised as standard to help meet the most demanding of operating environments. The range offers machines to suit either farmer or contractor whatever your reeler or spread width preference requirements.

Single Spread BarStorth provide two models of Single Spreader Bar, the “Farmer” and “Contractor”.

Heavy Duty 3-point linkage, adjustable alloy spread plate and single hydraulic slurry gates come as standard, the latter enabling control of slurry application from the tractor seat.

Pivoting hose mounting swing arms (Farmer 165°, Contractor 180°) give complete flexibility during headland turning and the optional 360° hose joint offers the ability to negate hose twist.

The Farmer model incorporates Lay Flat Hose as a means of equipment slurry transportation where the Contractor uses galvanised solid tube connection complete with 360° joint.

Additional features on the Contractor include Lay Flat Hose drag eye and hook leg to assist with in field hose management.

Model WeightGate

ValvesPipe System

Reeler Capacity

Hydraulic Width Height

Farmer Single 170kg 1 Snap-Tite x 1 DA 1.30m 1.55m

Contractor Single 220kg 1 Solid x 1 DA 1.20m 1.78m

Contractor Single Spreader


• Fully galvanised

• Parking stands

• Heavy Duty 3-point linkage

• 4” female Bauer hose connection

• Pivoting swing arm 165–180°

• Lay Flat or Solid Hose connection

• Hydraulic shut off control

• Adjustable nozzle angle

• Alloy spread plates

• Optional 360° swivel joint360° Joint Farmer Single Spreader


Twin Spread BarsBuilt to the same high specifications as the Single Spreaders, three robust models are available in the twin spreader range “Farmer”, “Combi” and “Contractor”.

Vertical fold transportation arms, alloy spread plates and 180° pivoting hose mounting swing arm come as standard.

A close coupled reeler and piggy-back facility is offered by the Farmer (Bobbin Reelers) and Combi (Mounted Reelers) models, simply add the optional A-frames. The Contractor has been specifically engineered with Trailed Reelers in mind.

Complete operator control is offered by the Combi and Contractor which are fitted with twin slurry gate valves enabling independent side shut off for operation in butts and tight spots. Using this facility in conjunction with individual left or right fold provides a useful unblocking resource when operating with extremely fibrous material.

Model WeightGate

ValvesPipe System

Reeler Capacity

Hydraulic Width Height

Farmer Twin 300kg 1 Snap-Tite Bobbin 2 DA 2.30m 2.45m

Combi Twin 350kg 2 Solid Mounted 3 DA 2.30m 2.60m

Contractor Twin 360kg 2 Solid Trailed 3 DA 2.10m 2.60m



• Parking stands

• Heavy duty 3-point linkage

• 4” female Bauer hose connection

• Pivoting swing arm 180°

• Lay Flat or Solid Hose connection

• Hydraulic shut off control(s)

• Adjustable nozzle angle

• Alloy spread plates

• Piggy-back facility

• Optional 360° swivel joint

Farmer Twin Spreader

Contractor Twin Spreader

Combi Twin Spreader

STORTH10

Dribble BarThe method of slurry application, in addition to dry matter, soil type and season, impacts the amount of nutrients available to the crop. Dribble Bars also known as band spreaders reduce the surface area of slurry exposed to the atmosphere lowering nutrient losses by as much as 5% in comparison to Spreader Bars (Fertiliser Manual, RB209).

Giving careful consideration to both operating costs and slurry potential Storth have developed a range of fully galvanised Dribble Bars to meet with the most demanding needs of the agricultural market.

Vertical Fold Dribble BarThe Vertical Fold Dribble Bar incorporates a close coupled central frame design giving narrow transport width as well as the strength to facilitate the optional piggy-back HD female A-frame.

Prior to delivery, slurry is processed by the NovaCut Macerator. This incorporates a simple Storth Lay Flat Hose designed stone trap. Prior to the Macerator, solid galvanised hose is used with the unique Super-X hose transporting slurry down to the ground hugging Lay Flat Hose.

Super-Ex Hose Solid Hose Connection

Stone Trap




• Vertical fold


• Single hydraulic gate control

• Solid hose connection

• NovaCut Macerator

• Stone trap

• Super-X Delivery Hose

• 250mm band width

• Optional piggy-back facility

• Optional flow meter ready


Vertical DB730 (Operational) Vertical DB730 (Transport)


Sequence Dribble BarAs the name suggests, the Sequence Dribble Bar uses an intuitive folding design enabling compact storage of wider dribble bars. This negates transportation height and width issues generally associated with dribble bars in excess of 8m. The Dribble Bar incorporates a Storth NovaCut Macerator, developed specifically to guarantee consistent distribution. Horizontal 50mm output holes are positioned in the Macerator’s base ensuring consistency despite potential input fluctuations. Super-X Hoses deliver the processed slurry to the field at ground level. Adjustable spring steel stabilisers assist with this process, limiting crop leaf contamination and placing slurry as close to the soil as possible.

Model Weight Outlets Hydraulic Width Height

Vertical DB624 745kg 24 3DA

3DA

4DA

4DA

2.60m 2.50m

Vertical DB7530 800kg 30 2.60m 3.04m

Sequence DB1035 950kg 35 2.85m 2.70m

Sequence DB1240 992kg 40 2.85m 2.70m



• Heavy Duty 3-point linkage

• Horizontal fold





• 50mm outlets

• Stone trap


• Sprung steel delivery stabilisers

• 300mm band width


• Optional 360° swivel jointSequence Dribble Bar Position 5

Sequence Dribble Bar Position 4




NovaCut Macerator

Horizontal 50mm Outlet

Flow Meter Ready Siemens Flow Meter Ready

STORTH12

Trailing Shoe InjectorStorth’s unique design of Trailing Shoe was engineered with extensive knowledge of slurry management coupled with product development. The Trailing Shoe is designed for use on grassland and arable land for applying slurry to the soil surface with minimum contamination to the plant leaves.

Manufactured using a single beam frame, the steering shoes units are mounted via sprung steel carriers producing a shoe spacing of 225mm. The sprung steel carriers have a steering capacity of -15/+15° designed for constant application of the slurry while turning. Each unit is fitted with a replaceable SG cast and blue hardened tip which parts the plant leaves allowing slurry to be delivered to the soil surface via a rubber placement boot.

Steering Sprung Steel Carriers

Model Outlet Working Width Weight Hydraulic Width Height

Trailing Shoe 5600 24 5.60m 1220kg

3 DA 2.55m

3.00m

Trailing Shoe 6200 28 6.20m 1350kg 3.25m

Trailing Shoe 7500 32 7.00m 1525kg 3.65m

Shoes Unit 50mm Horizontal




• Vertical fold arms

• Pivoting 2 piece swing arm 180°




• 50mm outlets

• Stone trap


• Sprung steel unit carriers

• Steering -15/+15°

• SG cast and blue hardened tip

• Rubber placement boots



7.5m 30 Outlet Trailing Shoe Transport Position


Model Capacity Length Width Height

Nurse Tank 65 65m3 10.70m 2.40m 3.85m

Nurse Tank 100 100m3 15.30m 2.40m 3.85m

Technical Details• 65m3 or 100m3 capacity

• HD construction with 5mm profile sides

• Hydraulic lift stub axles

• Hydraulic brakes

• 385/65R22.5 tyres

• LED road lighting kit

• Working light kit

• Single through chassis/floor design

• Fully enclosed with integral roof

• Sight gauge c/w closure tap

• Access ladder

• Manway hatch

• Front & rear mirrored ports

• 6” fill port

• 6” draw port

• 4” recirculation port

• Colour options available

• Additional options on request

Nurse TankMobile Nurse Tanks can be used for various reasons in the application and handling of slurry or digestate. Storth manufacture two sizes of tank, 65m3 and 100m3 which enable umbilical spreading where land is not traditionally accessible from the slurry or AD digestate store. Slurry is transported from the farm or the biogas source by road lorries or tankers and discharged into the Nurse Tank. The Tank acts as a buffer for the umbilical spreading system allowing continuous spreading between the tankers loads arriving at the site.

65m3 Nurse Tank

65m3 Nurse Tank including Kawco Port

STORTH14

Engine Pump SetStorth Pump Sets are designed to utilise the full potential of either the Cri-Man or Bauer Pumps by combining them with the Iveco N67 Series (173hp) diesel power unit. Each Pump Set is designed and built to meet your specific pumping requirements and may be skid or trailer mounted. Standard units are fitted with a manual control panel which give the operator start/stop and throttle up/down control. Further models encompass purpose-designed engine and pump management systems to allow for automatic pressure maintenance, enabling the operator to specify a required pump outlet pressure where the controller will modulate the engine speed to maintain the required pressure.

SIL995 fully automatic control option provides full one man pumping capability, with full control from the spreader tractor seat with 2km range. The radio link allows remote start and stopping of the pump, increase and decrease demand pressure or throttle position, and selection between pumping to line or pumping back to holding tank/lagoon.

Technical Details• Reduced labour

• Improved pump efficiency

• Minimise fuel consumption

• Eliminate tractor depreciation

• Single source control

• Professional spreading

Storth also offer bespoke units made to your specification. Please contact us with your requirements.

Engine Pump Station

Primer Pump

Divert Actuator Main SIL Control Panel


APPLY IT

EXPERTS IN SLURRY MANAGEMENT

SCRAPE IT

PUMP IT

PUMP IT MIX IT SEPARATE IT STORE IT

HOSE & REEL IT

Notes:

www.storthmachinery.co.uk

Stoneleigh Park, Station Road, Holme, Nr Carnforth, Lancashire, LA6 1HR

Manufactured in the UK

Tel: 0044 1524 781 900 Fax: 0044 1524 781 006 Email: [email protected]

For additional information and advice please contact your Storth representative

Robert Wilson07769 728 128

[email protected]

Gary Morland07919 563 796

[email protected]

Neil Robinson07887 855 048

[email protected]

Mark Longly07818 053 159

[email protected]

Dylan Owen07464 548 576

[email protected]

Global SalesSimon Jones

07527 539 [email protected]

storth have used their experience of slurry management … have used their experience of slurry...

Documents