Starting eCATT with TCD Recording MethodBy VenkatStep1: Use the Transaction codeSECATTto test the data usingeCATT (Extended Computer Aided Tool).Provide Test Script name in the initial screen ofeCATT.Here, in the scenario I have given Test Script as ZDEMOTEST and version as 1.Click CREATE button.Step2:In the next screen, we haveTWOtabs.1. Editor Tabwhere we can write our own ABAP code and use the eCATT special commands.2. Attribute Tabwhere we can provide Title, Component to which we are testing data.Step3:Click thePatternbutton on Application tool bar to select recording method. Select TCD (Recording) method.Step4: Select thepattern button. A pop-up box appears where you have to selectGROUPas UI Control. AndCOMMANDas TCD (Recording) as shown. Provide the transaction asMM01and press enter.Then the system automatically proposes Interface name and dont change this Interface name. In this scenario system proposesMM01_1.Now, click OK button to start recording.Step5: After the recording is done, you will get message the Recording Ended and press YES.And the following screen appears.Save and check syntax check.Step6: First of all execute the script without parameterization to confirm errorless recording.At the run time, a start options window appears. Select the following options as shown.And inUI ControlTab,Click on Execute button.Step7:After execution of the transaction, if the recording is free from errors, then the success log would be displayed. Suppose if there are any errors in recording of the transaction then the detailed error log would appear.If the transaction has executed successfully, you would get the following messages.

n