standard bidding document procurement …haryanapmgsy.etenders.in/tpoimages/haryanapmgsy/... ·...

STANDARD BIDDING DOCUMENT

PROCUREMENT OF

CIVIL WORKS

PART II: FORMS

NATIONAL HIGHWAY PROJECTAGREEMENT NO. ____________________________________

NATIONAL COMPETITIVE BIDDING

SECTION-1

List of Important Dates of Bids

I. Name of Work Widening, Strengthening & 4-laning from Km.42.720 to 47.080 & 0.00 to 1.732 of JagadhariBilaspur Sadhaura Naraingarh Raipur Rani (uptoMouli) S.H. No.1 city portion at Naraingarh inAmbala Distt. Under CRF Scheme.

2. Completion period 14(Fourteen) Months3 Date of Pre-Bid meeting 19.5.08 -- 11.00 Hours.4. Place of Opening of Bid Committee Room of Office of Engineer-in-Chief,

Haryana PWD B&R Br., Chandigarh.5. Date& Time for Opening of Price

Bid.To be announced

6 Officer Inviting Bids Superintending Engineer, Chandigarh Circle,Haryana PWD B&R Br., Chandigarh

Manual Tender

7 Date of issue of notice inviting Bids 8.5.08 9:00 Hrs. to 26.05.08 17:00 Hrs.8 Date of submission of manual Bid 27.5.08 16:00 Hrs.

E-Tendering

9 Date & Time for Tender download Online from Websitehttp://haryanapmgsy.etenders.in. 10:00 Hrs. 8.5.08 to 17:00 Hrs. – 26.5.08

10.

Date & Time for Bid preparationand Hash Submission

10:00 Hrs. 8.5.08 to 17:00 Hrs. – 26.5.08

11 Closing of Tender 26.5.08 - 17:01 Hrs. to 26.5.08 - 21:00 Hrs.12 Date & Time for Online Bid

Submission (Re-encryption): 26.5.08 - 21:01 Hrs. to 27.5.08 - 17:00 Hrs.

13 Last Date and Time of Receipt ofEMD Envelope

Upto 28.5.08 - 11:30 Hrs.

14 Date & Time for opening of EMDand Technical Envelopes

28.5.08 12:00 Hrs.

INVITATION FOR BID

(IFB)

(to be filled in by Employer)

GOVERNMENT OF HARYANA.National Highway Improvement PROJECT

INVITATIONS FOR BIDS (IFB)

NATIONAL COMPETITIVE BIDDINGDate : 25.4.08

Bid No. : CRF-2008-75The SE Chandigarh Circle,Chandigarh invites bids for the construction of works detailedin the table. The bidders may submit bids for any or all of the following works.

TABLEPackage

No.Name of Work Approximate

value of Works(Rs.)

Bidsecurity

(Rs.)

Cost ofdocument

(Rs.)

Period ofcompletion

1 2 3 4 5 6Wdg.,stg., and four lanningfrom KM. 42.720 to 47.080 &0 .00 to 1.732.of JagdhariBilaspur SadhauraNaraingarh Raipur Rani ( upto Mouli) S.H.No.1 cityportion at Naraingarh inAmbala Distt.

Rs.496.88Lacs.

Rs.994000/-

ContractorRs.496000/- Society.

Rs.3000/- 14(Fourteen)

Months.

2 Bidding documents (and additional copies) may be purchased from the office of S.E./ Xen.

From 9.00 A.M of 8.5.08 to 5.00 P.M of 26.5.08 for a non-refundable fee (three sets) asindicated Rs. 3000/- (Rs. 2000/- draft name in Secretary,IRC,New Delhi & Rs. 1000/- inname of Executive Engineer P.D.Naraingarh, in the form of cash or Demand Draft on anyScheduled bank payable at Naraingarh in favour of Executive EngineerP.D.Naraingarh.Interested bidders may obtain further information at the same address.Bidding documents requested by mail will be dispatched by registered/speed post onpayment of an extra amount of Rs 500/- (Rs. Five Hundred) The S.E./ Xen will not beheld responsible for the postal delay if any, in the delivery of the documents or non-receipt ofthe same.

3 Bids must be accompanied by security of the amount specified for the work in the table, payableat Naraingarh and drawn in favour of Executive Engineer, P.D.Naraingarh . Bid security willhave to be in any one of the forms as specified in the bidding document and shall have to be validfor 45 days beyond the validity of the bid.4. Bids must be delivered to Executive Engineer/ Superintending Engineer,Chandigarh

Circle Chandigarh & Executive Engineer(NH) Head office on or before 27.5.08 at 16.00hours and will be opened on the 28.5.08 at 12.00 hours in the Committee Room,office ofEIC PWD B&R Sector-19B,Chandigarh in the presence of the bidders who wish to attend. Ifthe office happens to be closed on the date of receipt of the bids as specified, the bids will bereceived and opened on the next working day at the same time and venue.

5. The bidders can also download the bidding documents from the internet site http://haryanapmgsy.etenders .in and http://haryanapwd-bandr.org and http://haryanapwd.nic.in butwould have to pay the cost of bid documents Rs. 3000/- (Rs. 2000/- draft name inSecretary,IRC,New Delhi & Rs. 1000/- in name of Executive Engineer(NH) and submit it in aseparate envelope marked 'Cost of Bidding Document downloaded from Internet'.

6. Facility of e-tendering is also available to the contractor to submit these bids digitally online. For details, they may refer instructions to Bidders or website http://haryanapmgsy.etenders.in

7. A pre-bid meeting will be held on 19.5.2008 at 11.00 hours in the Committee Room office ofEngineer-in-Chief ,Hr. PWD B&R, Chandigarh to clarify the issues and to answer questions onany matter that may be raised at that stage as stated in Clause 9.2 of ‘Instructions to Bidders’ ofthe bidding document.

8. Other details can be seen in the bidding documents.

Sd/-

Superintending Engineer Chandigarh Circle.Chandigarh

SECTION 1

INSTRUCTIONS TO BIDDERS (Please refer Part I)

(ITB)


APPENDIX to ITB

Clause ReferenceWith respect to

Section-I.

1. Name of the Employer is Superintending Engineer, Chandigarh Circle, PWD

B&R Branch, Chandigarh. [Cl.1.1]

2. The last five years

2003-2004

2004-2005

2005-2006

2006-2007

2007-2008

3. This annual financial turn over amount is Rs. 1242.20Lacs (Twelve hundredforty two point twenty lacs only) [Cl. 4.5A(a)]

4. Value of work is Rs. 248.45 Lacs (Two hundred forty eight point forty fivelacs)

[Cl. 4.5A(b)]

5. Quantities of work are : [Cl. 4.5A(c)]

Cement Concrete 698.53 Cum

Earth work 4800.00Cum

GSB 2952.00 Cum

WMM 2250.00 Cum

B.M. 2232.00Cum

SDBC 1115.66 Cum

6. The cost of electric work is Rs. ---- Nil ----- [Cl. 4.5A(d)]

7. The cost of water supply/sanitary works is Rs. ---Nil---- [Cl. 4.5A(e)]

8. Liquid assets and/or availability of credit facilities is Rs. 1.25Crore (Rupees

One point twenty five crore) [Cl. 4.5B(c)]

9. Price level of the financial year 2008-09 [Cl. 4.7]

10. The pre-bid meeting will take place at O/o Chief Engineer(NH) Chandigarh

(address of the venue) on _________ (time and date) [Cl. 9.2.1]

11. The technical bid will be opened at O/o Chief Engineer(NH) Chandigarh

(address of the venue) on _________ (time and date)

12. Address of the Employer : Superintending Engineer, Chandigarh Circle, PWD

B&R, Chandigarh. [Cl. 4.5(a)]

13. Identification : [Cl.19.2(b)]

-Bid for Widening, Strengthening & 4-laning from Km. 42.720 to47.080 & 0.00 to 1.732 of Jagadhari Bilaspur Sadhaura NaraingarhRaipur Rani (upto Mouli) S.H. No.1 city portion at Naraingarh inAmbala Distt. Under CRF Scheme.

(Name of contract)

-Bid reference No.________________________(insert number)

-Do not open before ______________________(Time and date)

14. The bid should be submitted through E-tendering only latest by __________

upto 2:00 PM (date and time) [Cl.20.1(a)]

15. The bid will be opened at O/o the Superintending Engineer, Chandigarh

Circle, PWD B&R Br., Chandigarh (place) on _________ at 3:30 PMs (time

and date)

[Cl. 23.1]

16. The Bank Draft in favour of Executive Engineer, Provincial Division, PWD

B&R Br., Naraingarh payable at Naraingarh. [Cl. 34.1]

17. The name of Dispute Review Expert is Sh. [Cl.36.1]

18.Escalation factors (for the cost of works executed and financial figure to a

common base value for works completed)

Year before Multiply factor

One 1.1Two 1.21Three 1.33Four 1.46

Five 1.61

SECTION 2

QUALIFICATION INFORMATION

(to be filled in by Bidder)

QUALIFICATION INFORMATION

The information to be filled in by the Bidder in the following pages will be used

for purposes of post qualification as provided for the Clause 4 of the Instructions to

Bidders. This information will not be incorporated in the Contract.

1. For Individual Bidders.

1.1 Constitution or legal status of Bidder

(Attach copy)

Place of registration : ______________________________

Principal place of business: ______________________________

Power of attorney of signatory of Bid

(Attach)

1.2 Total value of Civil Engineer Construction 19___19_______________B

Work performed in the last five years** 19___19_______________

(in Rs. Million) 19___2000_____________

1.3.1 Work performed as prime contractor, work performed in the past as a

nominated sub-contractor will also be considered provided the sub-contract

involved execution of all main items of work described in the bid document,

provided further that all other qualification criteria are satisfied (in the same

name) on works of a similar nature over the last five years.**ProjectName

Nameof the

Emplo-yer

Descrip-tion ofwork

ContractNo.

Valueof

Cont-ract(Rs.

Crore)

Date ofissue

of workorder

Stipulatedperiod ofcomple-

tion

Actual dateof

completion*

Remarksexplainingreasons for

dealy & workcompleted

*Attach certificate(s) from the Engineer(s)-in-Charge** immediately preceding the financial year in which bids are received.B Attach certificate from Chartered Accountant.

#1.3.2. Quantities of work executed as prime contractor, work performed in the

past as a nominated sub-contractor, will also be considered provided the sub-

contract involved execution of all main items of work described in the bid document,

provided further that all other qualification criteria are satisfied (in the same name

and style) in the last five years: **

Year Name ofthe work

Nameof theEmplo-yer*

Quantity of work performed (cum) @ RemarksCementConcrete(includingRCC &PCC)

Masonry Earthwork

WBM WMM Bituminouswork

Remarks*(indicate contractRef)

19__19__

19__19__

19__19__

19__19__

19__20__

1.4. Information on Bid Capacity (works for which bids have been submitted and

works which are yet to be completed) as on the date of this bid.

(A) Existing commitments and on-going works:Descriptionof works

Place &State

ContractNo.

Name &Addressof Emplo-yer

ValueofCont-ract(Rs.Crore)

StipulatedPeriod ofComple-tion

Value ofWorks*remainingto becompleted(Rs Cr)

Anticipateddate ofcompletion

1 2 3 4 5 6 7 8

*Attach Certificate(s) from the Engineer(s)-in-Charge@ The item of work for which data is requested should tally with that specified in ITBclause 4.5A(c).** immediately preceding the financial year in which bids are received.# Delete, if prequalification has been carried out.

(B) Works for which bids already submitted.

Descriptionof works

Place &State

Name &Address ofEmployer

Estimatedvalue ofworks (Rs.Cr)

StipulatedPeriod ofComple-tion

Date whendecision isexpected

Remarks, ifany

1 2 3 4 5 6 7

1.5. Availability of key items of Contractor's Equipment essential for carrying out

the Works [Ref. Clause 4.5(B)(a)]. The Bidder should list all the information

requested below. Refer also to Sub Clause 4.3(d) of the Instructions to Bidders.

Item ofwork

Requirement Availability proposalsNo. Capacity Owned/

Leased tobe procured

Nos./Capacity

Age/Condition

Remarks(from whomto bepurchased)

1.6. Qualifications and experience of key personnel required for administrationand execution of the Contract [Ref. Clause 4.5(B)(b)]. Attach biographical data.Refer also to Sub Clause 4.3 (e) of instructions to Bidders and Sub Clause 9.1 of theConditions of Contract.

Position Name Qualification Year ofExperience(General)

Years ofExperience in theproposed position

ProjectManager

Etc.

1.7. Proposed sub-contracts and firms involved. [Refer ITB Clause 4.3(k)]

Sanctions of theworks

Value of Sub-contract

Sub-contractor(Name &Address)

Experience in similarwork

Attach copies of certificates on possession of valid license for executing water

supply/sanitary work/building electrification works [Reference Clause 4.5(d) &

Clause 4.5(e)]

*1.8. Financial reports for the last five years: balance sheets, profit and loss

statements, auditors' reports (in case of companies/corporation), etc. List them

below and attach copies.

1.9 Evidence of access to financial resources to meet the qualification

requirements: cash in hand, lines of credit, etc. List them below and attach copies of

support documents.

1.10. Name, address, and telephone, telex, and fax numbers of the Bidders'

bankers who may provide references if contacted by the Employer.

1.11 Information on litigation history in which the Bidder is involved.

Other Party(ies)

Employer Cause ofDispute

Amount involved Remarks showingPresent Status

1.12. Statement of compliance under the requirements of Sub Clause 3.2 of the

instructions to Bidders. (Name of Consultant engaged for project preparation is ** …

…………)

_______________________________________________

_______________________________________________

1.13. Proposed work method and schedule. The Bidder should attach descriptions,

drawings and charts as necessary to comply with the requirements of the Bidding

documents. [Refer ITB Clause 4.1 & 4.3(1)]

1.14. Programme

1.15. Quality Assurance Programme

2. Deleted

3. Additional Requirements

3.1 Bidders should provide any additional information required to fulfill the

requirements of Clause 4 of the Instructions to the Bidders, if applicable.

(i) Affidavit

(ii) Undertaking

(iii) Deleted

(iv) Deleted

(v) Deleted

_______________________________________________

* Delete, if prequalification has been carried out.

** Fill the Name of Consultant.

*** Delete, if prequalification has not been carried out.

SAMPLE FORMAT FOR EVIDENCE OF ACCESS TO OR

AVALABILITY OF CREDIT FACILITIES

(CLAUSE 4.2(I) OF ITB)

BANK CERTIFICATE

This is to certify that M/s.____________________________________ is a reputed

company with a good financial standing.

If the contract for the work, namely __________________________ is awarded to

the above firm, we shall be able to provide overdraft/credit facilities to the extent of

Rs.__________________ to meet their working capital requirements for executing

the above contract during the contract period.

________________

(Signature)

Name of Bank

Senior Bank Manager

Address of the Bank

AFFIDAVIT

1. I, the undersigned, do hereby certify that all the statements made in the

required attachments are true and correct.

2. The undersigned also hereby certifies that neither our firm M/s______

_______________________________ have abandoned any work on

National Highways in India nor any contract awarded to us for such works

have been rescinded, during last five years prior to the date of this bid.

3. The undersigned hereby authorise(s) and request(s) any bank, person, firm or

corporation to furnish pertinent information deemed necessary and requested

by the Department to verify this statement or regarding my (our) competence

and general reputation.

4. The undersigned understand and agrees that further qualifying information

may be requested, and agrees to furnish any such information at the request

of the Department/Project implementing agency.

___________________________________

(Signed by an Authorised Officer of the Firm)

_______________

Title of Officer

_______________

Name of Firm

_____________

DATE

UNDERTAKING

I, the undersigned do hereby undertake that our firm M/s ___________________

_______________ would invest a minimum cash upto 25% of the value of the work

during implementation of the Contract.

___________________________________


_______________

Title of Officer

_______________

Name of Firm

_____________

DATE

SECTION 3

CONDITIONS OF CONTRACT

(Please refer Part I)

(to be supplied by the Employer)

SECTION 4

CONTRACT DATA


CONTRACT DATA

Clause ReferenceWith respect

Items marked "N/A" do not apply in this Contract to section3

1. The Employer is Superintending Engineer, Chandigarh Circle, PWD B&R Br.,

Chandigarh [Cl. 1.1]

Name :

Address : SCO 43 Sector-26,Chandigarh,

Name of authorized Representative (Will be intimated later)

2. The Engineer is Executive Engineer, Provincial Division, PWD B&R Br.,

Naraingarh

Name of Authorized Representative:

3. The Dispute Review Expert appointed jointly by the Employer and

Contractor is : [Cl. 1.1]

*Name :

*Address ________________________

4. The Defects Liability Period is 365 days from the date of

completion. [Cl.1.1 &35]

5. The Start Date shall be days for the date of issue of the

Notice to proceed with the work. [Cl.

1.1]

6. The Intended Completion Date for the Whole of the Works

is 14 months after start of work with the following milestones:

[Cl. 1.1,17 & 28]

Milestone dates: [Cl. 2.2 & 49.1]

Physical works to be completed Period from the start dateMilestone 1 i.e. work of B&C & Wdg. Complete 5 monthsMilestone 2 i.e. B.U.S.G. complete& 3Km. B.M. 5 monthsMilestone 3 i.e. completion 4 Months


to section 3

7. The Site is located at Km. 42.72 to 47.08 & 0 to 1.732 (City portionNaraingarh) [Cl. 1.1]

8. The name and identification number of the Contract is : [Cl. 1.1]

9. The works consist of Road , B&C work The work shall, inter alia, include the

following, as specified or as directed:

[Cl.1.1]

(A) Road Works

Site clearance; setting- out and layout; widening of existing carriageway and

strengthening including camber corrections; construction of new road/ parallel

service road; bituminous pavements remodelling/ construction of junctions,

intersections, bus bays, laybyes; supplying and placing of drainage channels,

flumes, guard posts and guard other related items; construction/extension of cross

drainage works, bridges, approaches and other related stones; road markings, road

signs and kilometer/ hectometer stones; protective works for roads/bridges; all

aspects of quality assurance of various components of the works; rectification of the

defects in the completed works during the Defects Liability Period; Submission of

"As-built" drawings and any other related documents; and other item of work as may

be required to be carried out for completing the works in accordance with the

drawings and provisions of the contract to ensure safety.

(B) Bridge WorksSite clearance; setting out, provision of foundations, piers abutments and bearings;

prestressed/reinforced cement concrete superstructure; wearing coat, hand railings,

expansion joints, approach slabs, drainage spouts/downtake pipes, arrangements

for fixing light posts, water mains, utilities etc.; provision of suitably designed

protective

works; providing wing/return walls; provision of road markings, road signs etc.; all

aspects of quality assurance; clearing the site and handing over the works on

completion; rectification of the defects during the Defects Liability Period and

submission of "As-built" drawings and other related documents; and other items of

work as may be required to be carried out for completing the works in accordance

with the drawings and the provisions of the contract and to Insure safety.


to section 3

(C) Other Items

Any other items as required to fulfill all contractual obligations as per the Bid

documents.

[Cl. 1.1]

10. The following documents also form part of the Contract:

[Cl.2.3(9)]

Undertaking given by agency if any

11. The law which applies to the Contract is the law of Union of India. [Cl.3.1]

12. The language of the Contract documents is English

[Cl.3.1]

13. Limit of subcontracting 50% of the Initial Contract Price

[Cl. 7.1]

14. The Schedule of Other Contractors.

[Cl.8]

15. The Schedule of Key Personnel As per Annex.-II to Section I [Cl. 9]

16. The minimum insurance cover for physical property, injury and [Cl. 13]

death is Rs. 5 lakhs per occurrence with the number of occurrences

limited to four. After each occurrence, contractor will pay additional

premium necessary to make insurance valid for four occurrences

always.

17. Site investigation report

[Cl. 14]

18. The Site Possession Dates shall be

[Cl.21]

19. Fees and types of reimbursable expenses to be paid to the

[Cl. 25]

Dispute Review Expert (To be inserted later)

20. Appointing Authority for the Dispute Review Expert - Council,

[Cl. 26]

Indian Roads Congress, New Delhi.

21. The period for submission of the programme for approval of

[Cl. 27.1]

Engineer shall be 21 days from the issue of Letter of

Acceptance.

22. The period between programme updates shall be 20 days.

[Cl. 27.3]

23. The amount to be withheld for late submission of an updated[Cl. 27.3]

programme shall be Rs.0.50 lakhs.


to section 3

24. The following events shall also be Compensation Events: [Cl.44]

Substantially adverse ground conditions encountered during the course of

Execution of work not provided for in the bidding document

(i) Removal of underground utilities detected subsequently

(ii) Significant change in classification of soil requiring additional

mobilisation bythe contractor, e.g. ordinary soil to rock excavation,

(iii) Removal of unsuitable material like marsh, debris dumps, etc not

caused by the contractor

(iv) Artesian conditions

(v) Seepage, erosion, landslide.

(vi) River training requiring protection of permanent work

(vii) Presence of historical, archeological or religious structures,

monuments interfering with the works

(viii) Restriction of access to ground imposed by civil, judicial, or military

authority.

25. The currency of the Contract is Indian Rupees. [Cl. 46]

26. The formula (e) for adjustment of prices are : [Cl. 47]

R= Value of work as defined in Clause 47.1 of Conditions of Contract

Adjustment for labour component

(i) Price adjustment for increase or decrease in the cost due to labour

shall be paid in accordance with the following formula:

VL= 0.85 x P1/100xRx(L1-L0)/L0

VL= increase or decrease in the cost of work during the month under

Consideration due to changes in rates for local labour.

Lo= The consumer price index for industrial workers for the State

On 28 days proceeding the date of opening of Bids as published


to section 3

By Labour Bureau, Ministry of Labour, Government of India.

L1= The consumer price index for industrial workers for the State

For the under consideration as published by Labour Bureau,

Ministry of Labour, Government of India.

P1= Percentage of Labour component of the work

Adjustment for cement component

(ii) Price adjustment for increase or decrease in the cost of cement

procured by the contractor shall be paid in accordance with the

following formula:

VC= 0.85xPC/100xRx(C1-C0)/C0

Vc= increase or decrease in the cost of work during the month under

Consideration due to changes in rates for cement.

Co= The all India wholesale price index for cement on 28 days preceding

the date of opening of Bids as published by the Ministry of Industrial

Development, Government of India, New Delhi.

C1= The all India average wholesale price index for cement for the month

under consideration as published by Ministry of Industrial

Development, Government of India, New Delhi

Pc= Percentage of cement component of the work

Adjustment of steel component

(vi) Price adjustment for increase or decrease in the cost of steel procured

by the Contractor shall be paid in accordance with the following

formula:

Vs= 0.85xPSx/100xRx(S1-S0)/S0

Vs= Increase or decrease in the cost of work during the month under

consideration due to changes in the rates for steel.


to section 3

S0= The all India wholesale price index for steel (Bars and Rods) on 28

days preceding the date of opening of Bids as published by the

Ministry of Industrial Development, Government of India, New Delhi.S1= The all India average wholesale price index for steel (Bars and Rods)

for the month under consideration as published by Ministry of Industrial

Development, New Delhi.

Ps= Percentage of steel component of the work.

Note : For the application of this clause, index of Bars and Rods has been

Chosen to represent steel group.

Adjustment of bitumen component

(iv) Price adjustment for increase or decrease is the cost of bitumen shallbe paid in accordance with the following formula:Vb= 0.85x Pb / 100xRx( Bi – Bo) / Bo

Vb= Increase or decrease in the cost of work during the month underconsideration due to changes in rates for bitumen.

Bo = The official retail price of bitumen at the LOC depot at nearest center on the day 28 days prior to date of opening of Bids.

Bi = The official retail price of bitumen of LOC depot at nearest center for the 15th day of the month under consideration.Pb = Percentage of bitumen component of the work.

Adjustment of POL (fuel and lubricant ) component

( V) Price adjustment for increase or decrease in cost of POL ( fuel andlubricant ) shall be paid in accordance with the following formula:

Vf= 0.85x Pf / 100xRx( Fi – Fo) / Fo

Vf = Increase or decrease in the cost of work during the month underconsideration due to changes in rates for fuel and lubricants.

Fo = The official retail price of High Speed Diesel ( HSD ) at the existing consumer pumps of LOC at nearest center on the day 28days prior to the date of opening of Bids.Fi = The official retail price of HSD at the existing consumer pumps

of IOC at nearest center for the 15th day of month of the under consideration.

Pf = Percentage of fuel and lubricants component of the work.

Note : For the application of this clause, the price of High Speed Diesel oilhas been chosen to represent fuel and lubricants group.


to section 3Adjustment for Plant and Machinery Spares component

( Vi) Price adjustment for increase or decrease in the cost of plant andmachinery spares procured by the Contractor shall be paid inaccordance with the following formula:

Vp= 0.85x Pp / 100xRx( Pi – Po) / Po

Vp = Increase or decrease in the cost of work during the month underconsideration due to changes in rates for plant and machinery spares.

Po = The all India wholesale price index for heavy machinery and parts on 28 days preceding the date of opening of Bids as

published by the Ministry of Industrial Development Government ofIndia, New Delhi.Pi = The all India average wholesale price index for heavy machinery

and parts for the month under consideration as published by Ministry of Industrial Development, Government of India, NewDelhi. [Cl. 49]

Pp = Percentage of plant and machinery spares component of the work.

Note : For the application of this clause, index of Heavy Machinery and partshas been chosen to represent the Plant and Machinery Spares group.

Adjustment of Other materials Component.

( Vii) Price adjustment for increase or decrease in cost of local materialsother than cement, Steel, Bitumen and POL procured by the contractorshall be paid in accordance with the following formula: [Cl. 49]

Vm= 0.85x Pm / 100xRx( Mi – Mo) / Mo [Cl. 50]

Vm = Increase or decrease in the cost of work during the month underconsideration due to changes in rates for local materials other than cement, Steel, Bitumen and POL.

Mo = The all India wholesale price index ( all commodities ) on 28 days preceding the date of opening of Bids, as published by the Ministry of Industrial Development Government of India, New Delhi. [Cl. 50]

Mi = The all India average wholesale price index( all commodities ) for the month under consideration as published by Ministry of Industrial Development, Government of India, New Delhi.

[Cl.51& 52]Pm = Percentage of local material component ( other than cement,

Steel, Bitumen and POL ) of the work.plant and machinery spares component of the work.


to section 3

The following percentages will govern the price adjustment for

the entire contract :

1. Labour - P1 25%2. Cement - Pc 5%3. Steel - Ps 5%4. Bitumen - Pb 10%5. POL - Pf 5%

6. Plant & Machinery Spares - Pp 5%7. Other Materials- Pm 45%

Total 100%

27. The proportion of payments retained (retention money)shall be (Cl. 48]6% from each bill subject to a maximum of 5% of final

contract price.

28. Amount of liquidateddamages for delay incompletion of works

For Whole of work (1/2000) th of the InitialContract Price, rounded off tothe nearest Thousand, per day.For sectional completion(wherever specified, in item 6 ofContract Data) (1/200)th ofinitial contract price for 5 kmsection, rounded off to thenearest thousand per day.

[Cl. 49]

29. Maximum limit ofliquidated damages fordelay in completion ofwork.

10 per cent of the InitialContract Price rounded off tothe nearest thousand.

[Cl. 49]

30 ------ Deleted-------31 -------- Deleted ---------

32. The amounts of the advance payment are:-Clause Reference

With respect to section3

Nature of Advance Amount (Rs.) Conditionsto be fulfilled

i. ----- Deleted -----ii. ----- Deleted -----

iii. Secured advance for non-perishable materialsbrought to site

75% ofInvoicevalue.

a) The materials are in-accordance with thespecification for Works;

b) Such materials havebeen delivered to site,and are properly storedand protected againstdamage or deteriorationto the satisfaction of theEngineer. Thecontractor shall storethe bulk material inmeasurable stacks.;

c) The Contractor'srecords of therequirements, orders,receipt and use ofmaterials are kept in aform approved by theEngineer and suchrecords shall beavailable for inspectionby the Engineer;

d) The contractor hassubmitted with hismonthly statement theestimated value of thematerials on sitetogether with suchdocuments as may be


to section 3required by the Engineerfor the purpose of valuationof the materials andproviding evidence ofownership and paymentthereof;e) Ownership of such

materials shall bedeemed to vest in theEmployer for which theContractor hassubmitted an IndemnityBond in an acceptableformat; and

f) The quantities ofmaterials are notexcessive and shall beused within areasonable time asdetermined by theEngineer.


to section 3 (The advance payment will be paid to the Contractor no later than28 days after fulfillment of the above conditions).

33 ----- Deleted ----- [Cl. 51.3]34. Repayment of secured advance: [Cl. 51.4]

The advance shall be repaid from each succeeding monthlypayments to the extent materials [for which advance waspreviously paid pursuant to Clause 51.4 of G.C.C.] have beenincorporated into the Works.

35. The Securities shall be for the following minimum amountsequivalent as a percentage of the Contract Price:

[Cl. 52]

Performance Security for 5 per cent of contract price plus Rs. …………….. (to be decided after evaluation of the bid) as additionalsecurity in terms of ITB Clause 29.5.The standard form of Performance Security acceptable to theEmployer shall be an unconditional Bank Guarantee of the type aspresented in Section 8 of the Bidding Documents.

36. The Schedule of Operating and Maintenance Manuals. -----------N/A

[Cl. 58]

37. The date by which "as-built" drawings (in scale as directed) in 2sets are required is within 28days of issue of certificate ofcompletion of whole or section of the work, as the case may be

[Cl. 58]

38. The amount to be withheld for failing to supply "as built" drawingsby the date required is Rs. Lakhs.

[Cl. 58]

39. The following events shall also be fundamental breach of contract:"The Contractor has contravened Sub-clause 7.1 and Clause 9 ofGCC".

[Cl. 59.2]

40. The percentage to apply to the value of the work not completedrepresenting the Employer's additional cost for completing theWorks shall be 20 per cent.

[3, Cl.60]

SECTION 5

TECHNICAL SPECIFICATIONS

(Attached)

SECTION 6

FORM OF BID

(to be filled in by Bidder)

FORM OF BID

Description of the Works :

_________________________________________________________________

_________________________________________________________________

_________________________________________________________________

BID

To :

Address :

1. We offer to execute the Works described above and remedy any defects

therein in conformity with the conditions of Contract, specification, drawings,

Bill of Quantities and Addenda for the sum(s) of

____________________________________________________________

____________________________________________________________

(____________________________________________________________)

2. We undertake, if our Bid is accepted, to commence the Works as soon as is

reasonably possible after the receipt of the Engineer's notice to commence,

and to complete the whole of the Works comprised in the Contract within the

time stated in the document.

3. We agree to abide by this Bid for the period of * ______days from the date

fixed for receiving the same, and it shall remain binding upon us and may be

accepted at any time before the expiration of that period.

4. Unless and until a formal Agreement is prepared and executed this Bid,

together with your written acceptance thereof, shall constitute a binding

contract between us.

5. We understand that you are not bound to accept the lowest or any tender you

may receive.

6. We accept the appointment of Shri ______________________ as the

Dispute Review Expert.

(OR)

We do not accept the appointment of Shri _________________ as the

Dispute Review Expert and propose instead that Shri __________________

be appointed as

Dispute Review Expert, whose BIO-DATA is attached.

Dated this ____________day of __________________20…..

Signature ____________________ in the capacity of ___________________

duly authorized to sign bids for and on behalf of _______________________

_____________________________________________________________

(in block capital or typed)

Address_____________________________________________________________ _____________________________________________________________ Witness_____________________________________________________________ _____________________________________________________________ Address_____________________________________________________________ _____________________________________________________________ Occupation_____________________________________________________________ _____________________________________________________________

SECTION 7

BILL OF QUANTITIES

(Attached)

BILL OF QUANTITIES

Preamble

1. The Bill of Quantities shall be read in conjunction with the Instructions to

Bidders, Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional,

and are given to provide a common basis for bidding. The basis of payment

will be the actual quantities of work ordered and carried out, as measured by

the Contractor and verified by the Engineer and valued at the rates and prices

tendered in the priced Bill of Quantities, where applicable, and otherwise at

such rates and prices as the Engineer may fix within the terms of the

Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in

so far as it is otherwise provided under the Contract, include all constructional

plant, labour, supervision, materials, erection, maintenance, insurance, profit,

taxes and duties, together with all general risks, liabilities and obligations set

out or implied in the Contract.

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or price shall be entered against each item in the Bill of Quantities,

whether quantities are stated or not. The cost of Items against which the

Contractor has failed to enter a rate or price shall be deemed to be covered

by other rates and prices entered in the Bill of Quantities.

6. The whole cost of complying with the provisions of the Contract shall be

included in the items provided in the priced Bill of Quantities, and where no

Item are provided the cost shall be deemed to be distributed among the rates

and prices entered for the related Items of Work.

7. General directions and descriptions of work and materials are not necessarily

repeated or summarized in the Bill of Quantities. References to the relevant

sections of the contract documentation shall be made before entering rates or

prices against each item in the Bill of Quantities.

8. The method of measurement of completed work for payment shall be in

accordance with the specification for Road and Bridge Works published by

the Ministry of Surface Transport (edition).

9. Errors will be corrected by the Employer for any arithmetic errors pursuant to

Clause 29of the Instructions to Bidders.

10. Rock is defined as all materials which, in the opinion of the Engineer, require

blasting, or the use of metal wedges and sledgehammers, or the use of

compressed air drilling for its removal, and which cannot be extracted by

ripping with a tractor of at least 150 kw with a single rear mounted heavy duty

ripper.

BILL OF QUANTITIES

Sl.No.

Description of Item (with briefspecification and reference to bookof specification)

Quantity Unit RateIn Figures In Words

Amount

1 Clearing and grubbing conforming toclause No. 201 of MORTHspecification for road & Bridge work(IV revision) of 2001 / Latest Edition.(1002.51)

1.223 Hect

2 Earth work in excavation for widening /hard shoulders in all kinds of soil as perdrawing design and instruction ofEngineer-in-charge including dressingof bottom and sides of trenches,stacking the excavated soil, clear fromthe edge of excavation as per clauseNo. 301 & 304 of MORT&Hspecification of ( 4th revision) of 2001latest edition.

4962.00cum

per Cum( per cubic

meter)

3 Relaying of earth available fromexcavation including watering androlling to desired density inclusive ofall lead & lift/ sorts of compensation ofland earth as per clause 305 ofMORT&H specification for Road &Bridges works. ( 4th revision) of 2001latest edition complete in all respect

4962.00cum

per Cum( per cubic

meter)

4 Providing & laying 260mm thickcompacted granular sub base in twolayers of (1st layer of 100 mm thick and2nd layer of 160 mm thick) by providingcoarse graded material, mixing in amechanical mix plant at OMC, carriageof mixed material to work site,spreading in uniform layers with motorgrader on prepared surface andcompacting with vibratory power rollerto achieve the desired density, completeas per clause No.401( Table 400-2grade-1) of MORT&H specificationfor road & Bridges ( 4th revision) of2001 latest edition as per clause No.401

3507.46cum

Per Cum( per cubic

meter)

5 Providing & laying 125mm thickcompacted graded stone aggregate toWet Mix Macadam specificationincluding premixing the material withwater at OMC in mechanical mix plantcarriage of mixed material by tipper tosite, laying in uniform layers with paverin sub base/ base course on wellprepared surface and compacting withvibratory roller to achieve the desireddensity as per clause No.406 ofMORT&H specification for road andbridge work ( 4th revision) of 2001latest edition complete in all respect

3069.00cum

per Cum(per cubic

meter)

6 Providing & laying primer coat overWMM surface with bitumen(reconditioning drum) emulsionmedium setting using 6 Kg/10 sqmarea. The construction operation shallconform to as per clause no.502 ofMORT&H specification for road andbridge work ( 4th revision) of 2001latest edition including cost of bitumenemulsion, complete in all respect.Instructions issued by MORT&H fromtime to time regarding bitumenemulsion will be followed strictly.

12075.00sqm

per sqm(Per

squaremeter)

7 Providing & laying bituminous tackcoat of bitumen ( reconditioning drummedium setting ) emulsion bitumenusing 2 Kg. per 10 sqm area on existingbituminous surface complete in allrespects including cost of bitumenemulsion as per clause No. 503 ofMORT&H specification for road andbridge work ( 4th revision) of 2001 latest editionInstructions issued by MORT&H fromtime to time regarding bitumenemulsion will be followed strictly.

195312.00 sqm

per sqm(Per

squaremeter)

8 Providing & laying 75 mm thick(compacted) layer of built-up spraygrout layer over prepared baseconsisting of two layers compositeconstruction of compacted crushedcoarse aggregates using motor graderfor aggregates. Key stone chipsspreader may be used with applicationof bituminous binder after each layerand with key aggregates placed on topof the second layer to serve as a baseconfirming to the line, grades andcross-section specified, complete in allrespects as per clause No.506 ofMORT&H specification for road &bridge works (4th revision) of 2001/latest edition.

4882.80cum

per Cum(per cubic

meter)

9 Providing & laying 50mm thick in onelayer (compacted) thickness ofBituminous Macadam as per as perclause No. 504, G-II of MORT&Hspecification for road and bridge work(4th revision) of 2001 latest editionusing 3.3 to 3.5% bitumen of grade60/70 as binder content by weight ofthe total mix using computerized HotMix Plant and Electronic sensor pavercomplete in all respects including costof bitumen. Instructions issued byMORT&H from time to time regardingmachinery & bitumen will be followedstrictly. The use of self propelledmechanical paver fitted with electronicsensor device confirming to MORT&Hspecification is mandatory.

3255.20cum

Per Cum(per cubic

meter)

10 Providing & laying 25mm thick(compacted) semi dense bituminousconcrete as per clause No.508 & tableNo.500.15 G-II and 113.3 ofMORT&H specification and road &Bridges works (4th revision) of 2001latest edition using bitumen CRMB-55as binder content not less than 5% byweight of total mix, complete in allrespect including cost of bitumenCRMB-55 grade. Instructions issued byMORT&H from time to time regardingmachinery & bitumen will be followedstrictly. The use of self propelledmechanical paver fitted with electronicsensor device conforming to MORT&Hspecification is mandatory

1627.60cum

Per Cum(per cubic

meter)

11 Providing and marking centre line/sideline/ Zebra crossing and arrow etc withhot applied thermo plastic road markingpaint 10cms wide / 15cms widecomplete in all respects such asfurnishing all labour, materials, toolsequipments including all incidentalcosts necessary for carrying out thework at site conforming to the technicalspecification clause No.803.4 ofMORT&H specification for road andbridge work (4th revision) of 2001latest edition.

1797.00sqm

per sqm(Per

squaremeter)

12 Dismantling of brick work laid incement sand mortar as per MORT&Hspecification as per clause No. 202 forroad and bridge work (4th revision) of2001 latest edition, as directed by theEngineer-in-charge, complete in allrespect.

7.37 cum per Cum(per cubic

meter)

13 Dismantling of RCC slab as perMORT&H specification as per clauseNo.202 for road & Bridge work ( 4th

revision) of 2001 latest edition, asdirected by the Engineer-in-charge,complete in all respect.

95.21cum

/ Cum(per cubic

metre)

14 Earth work in excavation infoundation, trenches, etc in all kinds ofsoil, upto depth as per drawing, designand instructions of Engineer-in-Chargeincluding dressing of bottom and sidesof trenches, stacking the excavated soilclear from the edge of excavation andsubsequently filling around the masonryin 15cm layers duly compactedincluding disposal of all surplusmaterial/soil as per clause No.301 and304 of MORT&H specification forroad and bridge work ( 4th revision) of2001 latest edition, as per drawings &direction of Engineer-in-Chargecomplete in all respects.

1027.96cum

/ Cum(per cubic

metre)

15 Providing & laying cement concrete1:3:6 mix with stone aggregate 20mmnominal size mechanically mixed andvibrated in foundation as per approveddrawings complete in all respect as perclause No.1000/1700 of MORT&Hspecification ( road wing) for road andbridge works ( 4th revision) of 2001latest edition.

81.00cum

/ Cum(per cubic

metre)

16 Cast in Situ Cement concrete M20kerbConstruction of cement concrete kerbwith top and bottom width 125 and150mm respectively 425mm high inM20 grade hydraulically casted, erectedto site, complete in all respect as perclause 408 of MORT&H specification– 2001. and as per drawing and directedby Engineer-in-charge.

2244.00mtr

/ Mtr ( PerMetre)

17 Providing & laying cement concrete M-15 in foundation & plinth as per clauseNo.1000/1700 of MORT&Hspecification for road and bridge works ( 4th revision) of 2001 latest edition asper drawing and as directed by theEngineer-in-charge complete in allrespect.

189.04cum

/ Cum(per cubic

metre)

18 Plain cement concrete 1:3:6 nominalmix in foundation with crushedaggregate 40mm nominal sizemechanically mixed, placed infoundation and compacted by vibrationincluding curing for 14 days. As perclause 1000/1700 of MORT&Hspecification – 2001.

10.08cum

/ Cum(per cubic

metre)

19 Providing & laying 1st class brick worklaid in cement mortar 1:3 in foundationcomplete in all respects as per clauseNo.1000/1300 of MORT&Hspecification for road and bridge works( 4th revision) of 2001 latest edition

2213.02cum

/ Cum(per cubic

metre)

20 Providing & laying cement concrete M-30 with stone aggregate 20mm nominalsize mechanically mixed and vibratedfor reinforced concrete work in slabexcluding steel reinforcement butincluding centering and shuttering laidin position as per approved drawingscomplete in all respects as per clauseNo.1000/1500 & 1700 of MORT&Hspecification ( road wing) for road and bridge works( 4th revision) of 2001 latest edition.

593.04cum

/ Cum(per cubic

metre)

21 Providing & laying 12mm thick cementplaster 1:3 as per clause No.1000/1300of MORT&H specification ( road wing) for road and bridge works( 4th revision) of 2001 latest editioncomplete in all respect.

43.37sqm

/ sqm (Persquaremetre)

22 Providing and fixing chequered tile ofISI mark in cement mortar in 1:3 over75mm thick PCC 1:3:6 complete as perMORT&H specification and as perdrawing and directed by engineer-in-Charge.

558.00sqm

Per sqm(per

squaremeter)

23 Providing high yield strength deformedbars Fe-500 for RCC works where notincluded in the complete rate of RCCwork including bending, binding andplacing in position as per clauseNo.1000/1600 MORT&H specificationfor road and bridge works (4threvision) of 2001 latest edition.

332.94qtl

/ qtl ( Perquintal)

24 Fabrication supply and erection of M.S.Tubular structure for over headstructure for installation of retro-reflective boards. The structure shouldbe duly pained and to be erected at siteas per clause No.802/1000/1900 ofMORT&H specification for road andbridge works (4th revision) of 2001/latest edition and as per drawing anddirected by the Engineer-in-Charge,complete in all respect.

(a) For cantilever over head board. 4 Nos. each

(b) For T-type cantilever over head board. 2No. each

25 Construction of RCC foundation forproviding M.S. tubular structure forover head signage. The CC mix to be inratio of 1:2:4 and that of lean to be inratio of 1:3:6. The work will be carriedout as per clause No.802/1000/1700 ofMORT&H specification for road andbridge works (4th revision) of 2001/latest edition and as per drawing anddirected by the Engineer-in-Charge,complete in all respect.

6 Nos. each

26 Manufacturing, supplying and fixing ofhigh intensity retro-reflective signagemade out of 2mm thick aluminum sheetface to be fully covered withencapsulated lens retro-reflectivesheeting of high intensity grade inblue/green colour classificationconfirming to IRC 67-1977 "Code ofpractice for road signs" IRC 30-1968standard letters and numerals ofdifferent heights for use on Highwaysigns and as per clause No.801 ofMORT&H specification for road andbridge works (4th revision) of2001/latest edition complete in allrespect as per drawing subject toapproval of Engineer-in-Charge. It shallhave symbols/border/massage ofsimilar sheeting in wide colour. Thereflecting sheeting shall be adhered tothe base substrate by heat lamb vacuumapplication (HVL) process. The boardshall have back support frame of MSangel of size 35 x 35 x 5mm. Theboards are to be fixed at the tubulartype structure as per direction of theEngineer-in-Charge, complete in allrespect. The contractor will supplywarranty for sheeting as per clauseNo.801.3.11.

54.00sqm

Per squaremeter

27 Providing & fixing Hazard marker ofsize 900x300mm made of 2mm thickaluminum sheet with back sport of MSangle 25x25x3mm as per clause No.800 of MORT&H complete boardprocessed by heat treatment process HIgrade sheeting on front side. Providedwith leg post of height 1.5 mtrs made ofMS angle 50x50x6mm fixed inC.C.1:2:4 block of size of600x600x600mm

2 Nos. /each

28 Providing & fixing speed limit board ofsize 600mm round shape made of 2mmthick aluminum sheet with back supportof MS angle 25x25x3mm as per clasueNo.800 MORT&H Complete boardprocessed by heat treatment process HIgrade sheeting on front side providedwith leg post of ht. 3.5 mtrs Made ofMS angle 50x50x6mm fixed in C.C.1:2:4 block of size 0f 600x600x600mm

4 Nos. /each

Sd/- Sd/-Head Draftsman Executive Engineer,

Provincial Division,Naraingarh

Sd/-Superintending EngineerChandigarh Circle, Hr.PWD B&RChandigarh Sd/-

Chief Engineer(NH)Hr.PWD B&R BR,

Chandigarh

Note :-

1. Item for which no rate or price has been entered in will not be paid for by the

Employer when executed and shall be deemed covered by the other rates

and prices in the bill of quantities (Refer : ITB Clause 13.2 and GCC Clause

43.3).

2. Unit rates and prices shall be quoted by the bidder in Indian rupee (ITB

Clause 14.1)

3. Where there is a discrepancy between the rate in figures and words, the rates

in words will govern. [ITB Clause 27.1(a)]

4. Where there is a discrepancy between the unit rate and the line item total

resulting from multiplying the unit rate by quantity, the unit rate quoted shall

govern [ITB Clause 27.1(b)].

SECTION 8

SECURITIES AND OTHER FORMS

(to be filled by Bidder/Employer)

BID SECURITY (BANK GUARANTEE)

WHEREAS __________________(name of Bidder) (hereinafter called "the Bidder")

has submitted his Bid dated _______________ (date) for the construction of

________________ [name of Contract hereinafter called "the Bid"]

KNOW ALL PEOPLE by these presents that we

_____________________________ (name of Bank) of _________________[name

of country] having our registered office at ___________________________

(hereinafter called "the Bank") are bound unto ____________________________

(name of Employer) (hereinafter called 'the Employer") in the sum of

___________________________* for which payment well and truly to be made to

the said Employer the Bank itself, his successors and assigns by these presents.

SEALED with the Common Seal of the said Bank this ______day of _______20__

THE CONDITIONS of this obligation are :

(1) If after Bid opening the Bidder withdrawas his bid during the period of Bid

validity specified in the Form of Bid.

OR

(2) If the Bidder having been notified to the acceptance of his bid by the

Employer during the period of Bid validity

(a) fails or refuses to execute the Form of Agreement in accordance

with the Instructions to Bidders, if required; or

(b) fails or refused to furnish the Performance Security, in accordance

with the Instructions to Bidders; or

(c) does not accept the correction of the Bid Price pursuant to Clause 27.

We undertake to pay to the Employer up to the above amount upon

receipt of his first written demand, without the Employer having to substantiate his

demand, provided that in his demand of Employer will note that the amount claimed

by him is due to him owing to the occurrence of one or any of the three conditions,

specifying the occurred condition or conditions.

This Guarantee will remain in force up to and including the date

____________________ ** days after the deadline for submission of Bids as such

deadline is stated in the Instructions to Bidders or as it may be extended by the

Employer, notice of which extension(s) to the Bank is hereby waived. Any demand

in respect of this guarantee should reach the Bank not later than the above date.

DATE _________________ SIGNATURE _________________

WITNESS ______________ SEAL_______________________

___________________________________________________________________

(Signature, name and address)

* The Bidder should insert the amount of the guarantee in words and figures

denominated in Indian Rupees. This figure should be the same as shown in

Clause 16.1 of the Instructions to Bidders.

** 45 days after the end of the validity period of the Bid. Date should be

inserted by the Employer before the Bidding documents are issued.

PERFORMANCE BANK GUARANTEE

To

_____________________[name of Employer]

_____________________[address of Employer]

_____________________

WHEREAS ________________________[name and address of Contractor]

(hereinafter called "the Contractor") has undertaken, in pursuance of Contract

No.__________ dated ____________ to execute _____________[name of Contract

and brief description of Works] (hereinafter called "the Contract").

AND WHEREAS it has been stipulated by you in the said Contract that the

Contractor shall furnish you with a Bank Guarantee by a recognized bank for the

sum specified therein as security for compliance with his obligation in accordance

with the Contract;

AND WHEREAS we have agreed to give the Contractor such a Bank

Guarantee:

NOW THEREFORE we hereby affirm that we are the Guarantor and

responsible to you on behalf of the Contractor, up to a total of ___________

[amount of guarantee]* ___________ ___(in words), such sum being payable in the

types and proportions of currencies in which the Contract Price is payable, and we

undertake to pay you, upon your first written demand and without cavil or argument,

any sum or sums within the limits of _________________[amount of guarantee] as

aforesaid without your needing to prove or to show grounds or reasons for your

demand for the sum specified therein.

We hereby waive the necessity of your demanding the said debt from

the contractor before presenting us with the demand.

We further agree that no change or addition to or other modification of

the terms of the Contract of the Works to be performed thereunder or of any of the

Contract documents which may be made between your and the Contractor shall in

any way release us from any liability under this guarantee, and we hereby waive

notice of any such change, addition or modification.

This guarantee shall be valid until 28 days from the date of expiry of

the Defect Liability Period.

Signature and Seal of the guarantor ______________

Name of Bank _______________________________

Address ___________________________________

Date ____________________________

__________________________________________________________________

* An amount shall be inserted by the Guarantor, representing the percentage

the Contract Price specified in the Contract including additional security for

unbalanced Bids, if any and denominated in Indian Rupees.

BANK GUARANTEE FOR ADVANCE PAYMENT

To

_____________________[name of Employer]

_____________________[address of Employer]

_____________________[name of Contractor]

Gentlemen:

In accordance with the provisions of the Conditions of Contract, sub-clause

51.1 ("Advance Payment") of the above-mentioned Contract __________________

[name and address of Contractor] (hereinafter called "the Contractor") shall deposit

with ______________ [name of Employer] a bank guarantee to guarantee his

proper and faithful performance under the said Clause of the Contract in an amount

of ___________________[amount of Guarantee]* ____________________[in

words].

We, the _______________[bank of financial institution], as instructed by the

Contractor, agree unconditionally and irrevocably to guarantee as primary obligator

and not as Surety merely, the payment to _________________[name of Employer]

on his first demand without whatsoever right of obligation on our part and without his

first claim to the Contractor, in the amount not exceeding ____________[amount of

guarantee]* ___________________________[in words].

We further agree that no change or addition to or other modification of the

terms of the Contractor or Works to be performed thereunder or of any of the

Contract documents which may be made between __________________[name of

Employer] and the Contractor, shall in any way release us from any liability under

this guarantee, and we hereby waive notice of any such change, addition or

modification.

This guarantee shall remain valid and in full effect from the date of the advance

payment under the Contract until _________________ [name of Employer] receives

full repayment of the same amount from the Contractor.

Yours truly,

Signature and Seal : ____________________________

Name of Bank/Financial Institution: ________________

Address : _____________________________________

Date : ____________

________________________________________________________________

* An amount shall be inserted by the Bank or Financial Institution representing

the amount of the Advance Payment, and denominated in Indian Rupees.

INDENTURE FOR SECURED ADVANCES

FORM 31

(for use in cases in which the contract is for finished work and the contractor has

entered into an agreement for the execution of a certain specified quantity of work in

a given time)

This indenture made the ___________ day of __________ 20___

BETWEEN ____________ (hereinafter called the contractor which expression shall

where the context so admits or implies be deemed to include his executors,

administrators and assigns) or the one part and the Employer of the other part.

Whereas by an agreement dated ______________ (hereinafter called

the said agreement) the contractor has agreed.

AND WHEREAS the contractor has applied to the Employer that he

may be allowed advanced on the security of materials absolutely belonging to him

and brought by him to the site of the works the subject of the said agreement for use

in the construction of such of the works as he has undertaken to executive at rates

fixed for the finished work (inclusive of the cost of materials and labour and other

charges)

AND WHEREAS the Employer has agreed to advance to the

Contractor the sum of Rupees _________________________ on the security of

materials the quantities and other particulars of which are detailed in Accounts of

Secured Advance attached to the Running Account Bill for the said works signed by

the Contractor on _________ and the Employer has reserved to himself the option

of making any further advance or advances on the security of other materials

brought by the Contractor to the site of the said works.

Now THIS INDENTURE WITNESSETH that in pursuance of the said

agreement and in consideration of the sum of Rupees ___________ on or before

the execution of these presents paid to the Contractor by the Employer (the receipt

where of the Contractor doth hereby acknowledge) and of such further advances (if

any) as may be made to him as a for said the Contractor doth hereby covenant and

agree with the President and declare as follows:

(1) That the said sum of Rupees ________________ so advanced by the

Employer to the Contractor as aforesaid and all or any further sum of sums

advanced as aforesaid shall be employed by the Contractor in or towards

expending the execution of the said works and for no other purpose

whatsoever.

(2) That the materials details in the said Account of Secured Advances which

have been offered to and accepted by the Employer as security are

absolutely the Contractor's own propriety and free from encumbrances of any

kind and the contractor will not make any application for or receive a further

advance on the security of materials which are not absolutely his own

property and free from encumbrances of any kind and the Contractor

indemnified the Employer against all claims to any materials in respect of

which an advance has be made to him as aforesaid.

(3) That the materials detailed in the said account of Secured Advances and all

other materials on the security of which any further advance or advances may

hereafter be made as aforesaid (hereafter called the said materials) shall be

used by the Contractor solely in the execution of the said works in

accordance with the directions of the Engineer.

(4) That the Contractor shall make at his own cost all necessary and adequate

arrangements for the proper watch, safe custody and protection against all

risks of the said materials and that until used in construction as aforesaid the

said materials shall remain at the site of the said works in the Contractor's

custody and on his own responsibility and shall at all times be open to

inspection by the Engineer or any officer authorized by him. In the event of

the said materials or any part thereof being stolen, destroyed or damaged or

becoming deteriorated in a greater degree than is due to reasonable use and

wear thereof the Contractor will forthwith replace the same with other

materials of like quality or repair and make good the same required by the

Engineer.

(5) That the said materials shall not be any account be removed from the site of

the said works except with the written permission of the Engineer or an officer

authorized by him on that behalf.

(6) That the advances shall be repayable in full when or before the Contract

receives payment from the Employer of the price payable to him for the said

works under the terms and provisions of the said agreement. Provided that if

any intermediate payments are made to the Contractor on account of work

done than on the occasion of each such payment the Employer will be at

liberty to make a recovery from the Contractor's bill for such payment by

deducting there from the value of the said materials than actually used in the

construction and in respect of which recovery has not been made previously,

the value for this purpose being determined in respect of each description of

materials at the rates at which the amounts of the advances made under

these presents were calculated.

(7) That if the Contractor shall at any time make any default in the performance

or observance in any respect of any of the terms and provisions of the said

agreement or of these presents the total amount of the advance or advances

that may still be owing of the Employer shall immediately on the happening of

such default be re-payable by the Contractor to be the Employer together with

interest thereon at twelve percent per annum from the date or respective

dates of such advance or advances to the date of repayment and with all

costs, charges, damages and expenses incurred by the Employer in or for

the recovery thereof or the enforcement of this security or otherwise by

reason of the default of the Contractor and the Contractor hereby covenants

and agrees with the Employer to reply and pay the same respectively to him

accordingly.

(8) That the Contractor hereby charges all the said materials with the repayment

to the Employer of the said sum of

Rupees____________________________ and any further sum of sums

advanced as aforesaid and all costs, charges, damages and expenses

payable under these presents PROVIDED ALWAYS and it is hereby agreed

and declared that notwithstanding anything in the said agreement and without

prejudice to the power contained therein if and whenever the covenant for

payment and repayment here-in-before contained shall become enforceable

and the money owing shall not be paid in accordance there with the

Employer may at any time thereafter adopt all or any of the following courses

as he may deem best:

(a) Seize and utilise the said materials or any part thereof in the competion

of the said works on behalf of the contractor in accordance with the

provision in that behalf contained in the said agreement debiting the

contractor with the actual cost of effecting such completion and the

amount due to the contractor with the value of work done as if he had

carried it out in accordance with the said agreement and at the rates

thereby provided. If the balance is against the contractor, he is to pay

same to the Employer on demand.

(b) Remove and sell by public auction the seized materials or any part

there of and out of the moneys arising from the sale retain all the sums

aforesaid repayable or payable to the Employer under these presents

and pay over the surplus (if any) to the Contractor.

(c) Deduct all or any part of the moneys owing out of the security deposit

or any sum due to the Contractor under the said agreement.

(9) That except in the event of such default on the part of the contractor as

aforesaid interest on the said advance shall not be payable.

(10) That in the event of any conflict between the provisions of these presents and

the said agreement the provisions of these presents shall prevail and in the

event of any dispute or difference arising over the construction or effect of

these presents the settlement of which has not been here-in-before expressly

provided for the same shall be referred to the Employer whose decision shall

be final and the provision of the Indian Arbitration Act for the time being in

force shall apply to any such reference.

Letter of Acceptance(Letterhead paper of the Employer)

_________________(Date)

To

________________________(Name and address of the Contractor)

________________________

________________________

Dear Sirs,

This is to notify you that your Bid dated _____________for execution of the

_________________________(name of the contract and identification number, as

given in the Instructions to Bidders) for the Contract Price of Rupees __________

___________________(__________________) (amount in words and figures), as

corrected and modified in accordance with the Instructions to Bidders1 is hereby

accepted by our agency.We accept/do not accept that _________________ be appointed as the

Adjudicator2. You are hereby requested to furnish Performance Security, in the form

detailed in Para 34.1 of ITB for an amount equivalent to Rs._________ within 21

days of the receipt of this letter of acceptance valid upto 28 days from the date of

expiry of defects Liability Period i.e. upto _________and sign the contract, failing

which action as stated in para 34.3 of ITB will be taken.

Yours faithfully,

Authorized Signature

Name and title of Signatory

Name of Agency.

___________________________________________________________________1 Delete "corrected and" or "and modified" if only one of these actions applies.

Delete as corrected and modified in accordance with the Instructions to

Bidders, if corrections or modifications have not been affected.2 To be used only if the Contractor disagrees in his Bid with the Adjudicator

proposed by the Employer in the "Instructions to Bidders".

Issue of Notice to proceed with the work

(Letterhead of the Employer)

_________________(Date)

To

________________________(Name and address of the Contractor)

________________________

________________________

Dear Sirs,

Pursuant to your furnishing the requisite security as stipulated in ITB Clause

34.1 and signing of the Contract for the construction of ______________________

_________________________________________________________________

_______________________________________________________________ at a

Bid Price of Rs. ___________________________.

You are hereby instructed to proceed with the execution of the said works in

Accordance with the contract documents.

Yours faithfully,

(Signature, name and title of signatory authorizedto sign on behalf of Employer)

Agreement Form

Agreement

This agreement, made the _________________ day of ________________

between ___________________ (name and address of Employer) (hereinafter

called " the Employer) and____________________________________ (name and

address of contractor) hereinafter called "the Contractor" of the other part.

Whereas the Employer is desirous that the Contractor execute

________________________________________________________________

(name and identification number of Contract) (hereinafter called "the Works") and

the Employer has accepted the Bid by the Contractor for the execution and

completion of such Works and the remedying of any defects therein, at a cost of

Rs._________

______________________________________________________________

NOW THIS AGREEMENT WITNESSETH as follows :

1. In this Agreement, words and expression shall have the same

meanings as are respectively assigned to them in the conditions of contract

hereinafter referred to and they shall be deemed to form and be read and construed

as part of this Agreement.

2. In consideration of the payments to be made by the Employer to the

Contractor as hereinafter mentioned, the Contractor hereby covenants with the

Employer to execute and complete the Works and remedy any defects therein in

conformity in all aspects with the provisions of the contract.

3. The Employer hereby covenants to pay the Contractor in consideration

of the execution and completion of the Works and the remedying the defects

wherein Contract Price or such other sum as may become payable under the

provisions of the Contract at the times and in the manner prescribed by the Contract.

4. The following documents shall be deemed to form and be ready and

construed as part of this Agreement viz.

(i) Letter of Acceptance

(ii) Notice to proceed with the works;

(iii) Contractor's Bid

(vii) Condition of Contract: General and Special

(viii) Contract Data

(ix) Additional Condition

(x) Drawings

(xi) Bill of Quantities and

(xii) Any other documents listed in the Contract Data as forming part of the

Contract.

In witnessed whereof the parties there to have caused this Agreement to be

executed the day and year first before written.

The Common Seal of ____________________________________________

was hereunto affixed in the presence of :

Signed, Sealed and Delivered by the said ____________________________

___________________________________________________________________

in the presence of :

Binding Signature of Employer _________________________________________

Binding Signature of Contractor _________________________________________

UNDERTAKING

I, the undersigned do hereby undertake that our firm M/s

_________________________________________ agree to abide by this bid for a

period __________days for the date fixed for receiving the same and it shall be

binding on us and may be accepted at any time before the expiration of that period.

________________________________________


_________________

Title of Officer

_________________

Name of Firm

_______

DATE

SECTION 9

DRAWINGS

(Attached)

SECTION 10

DOCUMENTS TO BE FURNISHED BY BIDDER

(Attached)