ssd drive3.imimg.com/data3/je/mu/my-8045463/cl_microtrans.pdf · 2020. 1. 21. · ssd drive :...
TRANSCRIPT
SSD Drive :Originally Known as Shackelton System Drives - 1974 to 1992
Eurotherm Drives:It was taken over by Eurotherm & then known as Eurotherm Drive – 1992 to 2002
In 2002 Eurotherm plc UK sold their drives business worldwide to UniDEL INDIA.
Parker Hannfin Inc.Parker Hannfin Inc.Parker - USA acquires SSD Drive in August 2005
In early 2007, UniDEL sold its shareholding in SSD Drives India to Parker Hannifin
Corporation USA & started its world wide operation under name of Parker - SSD Drive
� AC Drives generally used where
Small size of motor
Multiple motors are operated at same speed with single drive
Application required full load Torque at zero speed
Application required increased starting Torque
3 type of Parker SSD ac drives are 650 series , 690P , 890+ series
� DC Drives generally used where
Motor speed control should not higher than 2500 RPM
Starting Torque is higher than 150% of rated or unpredictable
Application HP requirement is medium to large
Application requiring continuous regeneration for overhauling loads
2 types of Parker SSD dc Drive are Analog & Digital.
Analog are 512C & 514C , Digital DC drives are 590 series
Analog Non-Isolated Converter: 506/507/508
Economical, compact torque & speed control of permanent magnet or shunt
wound dc motors. Tachometer or armature voltage feedback, 3,6, or 12A
armature option.
Application: Conveyors, Basic speed control & Packaging Machinery
Single phase Analog Two Quadrant Isolated Convertor : 512C
Extremely linear speed & current loops in an isolated package, ideal for single
or multiple motor application up to 32A (10 HP).
Application: Centrifugal fans and pumps, Extruders & Mixers,
Small paper converting Machines
Single phase Analog Four Quadrant Isolated Convertor : 514C
It offers full four quadrant regenerative control of permanent magnet or shunt
wound DC motor. Ideal for application requiring accurate or rapid of high
inertia loads deceleration. Effective for single or multiple motor application
up to 32 A (10 HP).
Applications: Machine Tool Spindles, Wire drawing machines,
Winders & Reelers.
590+ Integrator Series 2 DC Drive� Designed for machine integrators
� Dual encoder inputs
� Inbuilt functional block programming
� Built in Monitoring & oscilloscope
� Function
Available as non regenerative or full � Available as non regenerative or full
four four quadrant regenerative.
� Available from 1- 2400 A maximum
Serial Communication & field bus
options are: Profibus –DP, Canopen, Modbus plus, Devicenet, Ethernet, RTU.
Application: Converting Machinery, Hoists & Cranes,
Plastic processing machinery,
Wire & cable manufacturing,
Automotive test stands
General Purpose AC Drives: AC650 SeriesThe AC650 is a simple, compact, cost effective solution
to basic Volts/Hertz open-loop motor speed control
Applications : Conveyors, Pumps and fans, Machine spindles
High Performance AC Drives: AC650G SeriesThe AC650G is sensor less flux vector control.
It ideally suited for applications where improved speed regulation
of variable loads and higher starting torques for high inertia of variable loads and higher starting torques for high inertia
systems is required.
Application: Centrifugal pumps, Mixers
Industrial blowers and fans
Compact Drive for Sensor less Servo Control:
AC650S SeriesIt is designed to save energy in general purpose applications by
replacing induction motors by more efficient permanent-magnet
motors. It controls the motor without a speed sensor.
Application: • Energy savings are required:
Pumps, fans, hydraulic systems, compressors
• Compactness is required:
Machine tools, Packaging machinery, conveyors,
Winders/unwinders
The AC690+ Integrator series provides high
performance complex or demanding applications.
Available with multiple communications and
control options for flexibility.
Typical applications include:
Multi-motor drive systems for process lines
• Distributed systems with communications
• High performance test equipment including • High performance test equipment including
4-quadrant regenerative operation
Eliminates Input harmonics
Unity power factor – no penalties!!
It provides open loop(v/f), sensor less vector
and closed loop vector in a single drive.
The active front end drive typical ac drives
harmonics keeping THD below 3%
LCL filter is low pass design to remove high
frequency harmonics.
Control section provides signal to both bridges.
• Active Front End (AFE) configuration
Modular AC Systems Drives: AC890 SeriesThe AC890 Series is a range of modular AC drives, designed to minimize space
and maximize performance in multiple axes applications.
This AC890 Series can provide torque, speed and position control and can be
configured to control permanent magnet servo motors in addition to induction
motors. Available as stand-alone or common bus DC modules.
USB Programming Port, Torque & Speed analogue outputs
Typical applications include:
• Printing machinery, • Converting machinery: coating, cutting, laminating
• High performance multi-axis machinery including 4-quadrant regenerative • High performance multi-axis machinery including 4-quadrant regenerative
operation
High Power AC/Servo Drives: AC890PXThe AC890PX is a high power modular systems drive designed for industrial
and power conversion applications. Available as a standalone drive or as part
of a high power drive system, the AC890PX features removable phase and
control modules, which allow for simple servicing and flexible system design.
Typical applications include:
• Extruders, • Pumps and Fans
• Mixers, centrifuges
• Engine dynamometers
• Power conversion inverters
DSE is the programming, monitoring and diagnostic software
platform for SSD drives.
Function blocks dedicated to speed control, inputs, outputs,
ramps, winder functions, PID, diameter calculator, and more.
Using straightforward block programming, DSE allows the
user to create, parameterize and configure user defined
� applications.
� It is possible to monitor every parameter of the drive either
� as a digital value or as a function in the “chart recorder”
� during normal operation.� during normal operation.
� While the drive is in running mode the oscilloscope function
� allows ‘‘on-line’’ monitoring of selected parameters and
� the recording of trends.
� Actual Power Saving
� All I/Os are configurable unlike others pre selected
� Extended the I/Os –no extra cost for PLC
� 12 bit resolution can be provided� 12 bit resolution can be provided
� Monitoring the diameter control inside the drive
� Store 20 different application program to drive
� Detachable keypad & it’s same for all SSD drive
� 8 International language selected on Keypad
� Easy to commission & maintain
� IntroductionMr. NISHAD SHAH having 25 yrs of experience in Industrial Automation founded company in 2002
� InfrastructureCorporate office @ Vile Parle (E) & Factory @ Vasai (E)– Sativali
� Team SizeCompany is growing with 20 dedicated Personal Team
Sales Support� Sales SupportProduct wise sales personal with industry experienced, commit to deliver
� After Sales SupportTelephonic, Email & Remote access support with experienced engineer
On site support is also provided as when required in critical condition.
� ATC– Automation Technology CentreParker SSD Drive division has assigned MICROTRANS as its “ ATC Partner ”
� Client ReferenceBARC, JNPT, Rehau, Akzo Noble, Alok Textile & Many more….
Sales: Mr. Bimal Shah
Contact No.: 98214 90904 Email : [email protected]
Support: Mr. Prashant Jadhav
Contact No.: 77989 89951 Email : [email protected]
Admin: Mr. Mahendra Therade
Contact No.: 77989 89954 Email : [email protected] No.: 77989 89954 Email : [email protected]
Admin Office : 4 - A, Niwara, Shahaji Raje Marg, Vile Parle (E), Mumbai - 400057.
Phone No.: 022 - 66955321/22 Fax: 022-66955323.
Work Shop: F-15, Shailesh Indl. Complex, Sativali Road, Vasai (E), Thane - 401208.
Phone No. : 0250 - 2458882 / 83.
Website: www.microtrans.co.in ; www.indiamart.com/microtrans-mumbai