ssa config guide windows 7
TRANSCRIPT
-
8/2/2019 SSA Config Guide Windows 7
1/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 1
Seamless and Secure Access(SSA)
Manual Configuration Guide
for Windows 7
-
8/2/2019 SSA Config Guide Windows 7
2/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 2
1 Enable Wi-Fi
a) Please refer to your computers user manual to enable the Wireless (Wi-Fi) connection.
b) Please click on Start > Control Panel and switch View by to Category before following the
instructions in this user guide.
-
8/2/2019 SSA Config Guide Windows 7
3/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 3
c) Click Start and then click Control Panel. In Control Panel, click on System and Security
and then click on Administrative Tools. In Administrative Tools, click Services and scroll
to the bottom and make sure the WLAN AutoConfig service is started.
Note: If you are using a third-party Wi-Fi manager, e.g., Intel PROSet, ThinkVantage Access
Connections, etc., please disable it before following the instructions in this guide.
Alternatively, you may use the third-party Wi-Fi manager to configure the settings stated in
this guide. If you need help to use your third-party Wi-Fi manager, please refer to the
instruction manual provided by the manufacturer.
-
8/2/2019 SSA Config Guide Windows 7
4/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 4
2 Connect to Wireless@SG via SSA
a) Click on Start and select Control Panel.
-
8/2/2019 SSA Config Guide Windows 7
5/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 5
b) Select NetworkandInternet.
c) Select Network and Sharing Center.
-
8/2/2019 SSA Config Guide Windows 7
6/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 6
d) Click on Set up a connection or network.
-
8/2/2019 SSA Config Guide Windows 7
7/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 7
e) Select Manually connect to a wireless network and click Next.
-
8/2/2019 SSA Config Guide Windows 7
8/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 8
f) Enter the following information:
Network name: Wireless@SGx
Security type: WPA-Enterprise
Encryption type: TKIP
Click on Next
-
8/2/2019 SSA Config Guide Windows 7
9/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 9
g) Click on Change connection settings.
-
8/2/2019 SSA Config Guide Windows 7
10/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 10
h) Configure the following settings:
Choose a network authentication method: Microsoft: Protected EAP (PEAP).
Remember my credentials for this connection each time Im logged on : Check
Click on Settings.
-
8/2/2019 SSA Config Guide Windows 7
11/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 11
i) Configure the following Protected EAP Properties:
Validate server certificate: Check
Connect to these servers: Uncheck Trusted Root Certification Authorities: Go Daddy Class 2 Certification Authority
Enable Fast Reconnect: Uncheck
Click on Configure
-
8/2/2019 SSA Config Guide Windows 7
12/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 12
j) Uncheck Automatically use my Windows logon name and password (and domain if any)
k) Click OK twice to return to the previous windows
l) Click Advance settings
-
8/2/2019 SSA Config Guide Windows 7
13/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 13
m) Ensure Specify authentication mode: ischecked, and select User authentication from the
drop-down box.
n) Click Save credentials. In the User name box, enter your Wireless@SG username followed
by @domain format. In the Password box, enter your Wireless@SG password. Click OK to
save credentials.
username@domain
-
8/2/2019 SSA Config Guide Windows 7
14/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 14
o) Return to Network and Sharing Center. Click Connect to a network. A small window will
appear. Select Wireless@SGx and click Connect. Note that you are able to see
Wireless@SGx SSID only if you are in a Wireless@SGx hotspot.
p) You are now connected to Wireless@SGx
-
8/2/2019 SSA Config Guide Windows 7
15/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 15
3 Uninstall SSA profile
Follow the steps below to remove the Wireless@SGx settings:
a) Click on Start and select Control Panel.
-
8/2/2019 SSA Config Guide Windows 7
16/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 16
b) Select Network and Internet.
-
8/2/2019 SSA Config Guide Windows 7
17/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 17
c) Select Network and Sharing Center.
-
8/2/2019 SSA Config Guide Windows 7
18/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 18
d) Click on Manage Wireless Network.
e) Select Wireless@SGx and click Remove.
-
8/2/2019 SSA Config Guide Windows 7
19/19
Seamless and Secure Access (SSA) Manual Configuration Guide for Windows 7 (Rev. 1.0)
Page 19
f) A warning dialog box will appear. Click OK.