speedandfeeds em length

2
Sheet1 Page 1 EM Dia 1” 0.004 LOC Reg EM EM Dia 0.5” 0.002LOC Stub EM EM Dia 0.25” 0.00LOC Long EM sfpm rpm HSS / Alum 150 0.25 2292 0.001 2 Carbide / Alum 600 1 2292 0.004 6 HSS / Steel 75 0.25 1146 0.001 2 Carbide / Steel 300 0.25 4584 0.001 2 HSS / SS 35 1 134 0.004 6 Carbide / SS 120 0.5 917 0.002 2 End Mill Feed and Speed Chart taking into account End Mill Stickout or Length from Tool Holder (Collet) 10% of End Mi DOC) Diameter of End Mill Thickness (0.004”/Diameter ) Enter Number of Flutes

Upload: rowel-magbanua

Post on 16-Nov-2015

4 views

Category:

Documents


1 download

DESCRIPTION

SpeedAndFeeds EM Length

TRANSCRIPT

Sheet1End Mill Feed and Speed Chart taking into account End Mill Stickout or Length from Tool Holder (Collet)EM Dia 1 0.004LOC Reg EMFeed 1XThe shorter the EM stickout the high Maximum Feed PossibleEM Dia 0.5 0.002LOC Stub EMFeed 4XEM Dia 0.25 0.001LOC Long EMFeed 0.25XRecommended Maximum Feeds at Depth of Cut 10% of End Mill Diameter (0.5 Dia = 0.050 DOC)sfpmEnter Diameter of End MillrpmEnd Mill Chip Thickness (0.004/Diameter)Enter Number of FlutesFeed Regular Length EMFeed Stub Length EMFeed Long Length EMDepth of CutHSS / Alum1500.2522920.00124.618.31.10.025Carbide / Alum600122920.004655.0220.013.80.100HSS / Steel750.2511460.00122.39.20.60.025Carbide / Steel3000.2545840.00129.236.72.30.025HSS / SS3511340.00463.212.80.80.100Carbide / SS1200.59170.00223.714.70.90.050

&C&"Times New Roman,Regular"&12&A&C&"Times New Roman,Regular"&12Page &P

Sheet2

&C&"Times New Roman,Regular"&12&A&C&"Times New Roman,Regular"&12Page &P

Sheet3

&C&"Times New Roman,Regular"&12&A&C&"Times New Roman,Regular"&12Page &P