specifications t umble t - wire caddy
TRANSCRIPT
Unassembled packaging.
Parts ready for packaging or assembly.
• Holds up to 8 standard 6-1/2” spools• Weight: 12 pounds (empty)• Dimensions: 9” H x 21” W x 24” D (assembled)
Work faster, work easier, work safer.
Flexmate, Inc.Signal Hill, CA
562.426.3020
T umble T™ (Pronounced Tumble-T)
The innovative wire rack solution.
Flex
mat
e, In
c.11
60 E
. 25t
h St
reet
Sign
al H
ill, C
A 90
755
T umble T™ SPECIFICATIONS
• Holds up to 8 standard 6-1/2” spools
Unassembled packaging.
Parts ready for packaging or assembly.
Dis
trib
uted
By:
Dis
trib
uted
By:
All pieces are precision cut and finished for easy assembly. A parts list and easy-to-follow step-by-step instructions are included.
EASY TO ASSEMBLEOr purchase it pre-assembled.
Assembly is easy with the T umble T™ Wire Rack. Just a couple of common hand tools and a few minutes is all it takes and you’llhave your T umble T™ Wire Rack ready to load.
The T umble T™ Wire Rack works with a very precise rolling gravity lock system. Standard 6–1/2” OD spools will not come out of their cradle, unless you want them to. No center rod to tangle wire. No lock pins to come loose or be lost.
OUR UNIQUE PATENT PENDING SYSTEM
Simply use one hand and move the rolling “T” locking bar to the longest leg of the “T” slot on both end plates. This allows just enough clearance to insert the spools into the cradle. Once loaded, release the rolling lock bar and gravity will lock the spools into place.
• Powder coated aluminum SIDE PLATES and END CAPS.• Galvanized ROLLER BARS.• Custom PVC rollers.• Gold zinc plated NUTS & BOLTS.
RUGGED LIGHTWEIGHT CONSTRUCTION
INNOVATIVE FEATURESWorking with todays plastic spools you will come accross one that might be cracked or broken. Not a problem. With every rack we include two reusable END CAPS. Simple and easy to use. Completely manufactured at our 40,000 square
foot facility in Signal Hill, California, along with a complete line of CEMENT, DRYWALL and FLOOR COVERING HAND TOOLS. Experienced in manufacturing since 1963.
MANUFACTURED IN THE USA
EASY TO LOAD
Works best when all spools pull in the samedirection. Pull wires from the bottom of the spool(s) towards the carrying handle.
The T umble T™ has been designed to gang together. Simply bolt two or more racks into a train and add the optional wheels.
NEED MORE THAN 8 SPOOLS?
END CAPS can be conveniently stored on any spool.