specifications package updates (inserts for printed

www.franke-commercial.com61562 | SPECIFICATIONS | UPDATED 2016

USA: 1-855-526-0503 | [email protected]

SPECIFICATIONS PACKAGE UPDATES (inserts for printed package #61562)Revisions are indicated in the footer showing the month/year of the change. Revisions to date include these chapters:

GENERAL INFORMATION (Tab # 1)Several pages updated

dOubLE TOpMOuNT sINks (Tab # 3)(REPLAC EMENT FOR THE ENTIRE SECTION)99 D6408-1 Removed bowl bracket from drawing100 D8610-1 Removed bowl bracket from drawing101 D6410PCB-1 Drawing updated. No H bracket or spillway102 ALBDC182605P-1 This model uses Easy Claw bracket104 ALBD6405-1 Removed bowl bracket from drawing105 LBD6407-1 Removed bowl bracket from drawing106 LBD6408-1 Removed bowl bracket from drawing107 LBD6808-1 Removed bowl bracket from drawing108 LBD7508-1 Removed bowl bracket from drawing109 ALBD1305P-1 Removed bowl bracket from drawing110 ALBD1306P-1 Removed bowl bracket from drawing111 ALBD1308P-1 Removed bowl bracket from drawing112 ALBD4405P-1 Removed bowl bracket from drawing113 ALBD4406P-1 Removed bowl bracket from drawing114 LBD4408P-1 Removed bowl bracket from drawing115 LBD4410P-1 Removed bowl bracket from drawing116 ALBD6405P-1 Removed bowl bracket from drawing117 ALBD6406P-1 Removed bowl bracket from drawing118 LBD6408P-1 Removed bowl bracket from drawing120 ALBD7505P-1 Removed bowl bracket from drawing121 ALBD7506P-1 Removed bowl bracket from drawing122 LBD7508P-1 Removed bowl bracket from drawing123 LBD7510P-1 Removed bowl bracket from drawing124 LBD7412P-1 Removed bowl bracket from drawing

TRIpLE TOpMOuNT sINks (Tab # 3)(REPLACEMENT FOR THE ENTIRE SECTION)126 T6410PCB-1 Removed bowl brackets from drawing127 T8610-1 Removed bowl bracket from drawing128 LBT6407CB-1 Removed bowl bracket from drawing129 LBT6410PCB-1 Removed bowl bracket from drawing130 LBT8607-1 Removed bowl bracket from drawing131 LBT8610P-1 Removed bowl bracket from drawing

uNdERMOuNT sINks (Tab #6)169-A UCS6105P-1 New sink added

VANITY bAsINs (Tab #7) If you have a printed package, remove the divider and all

content pages as this product range is no longer available

sCuLLERY-OTHER (Tab #10) (REPLACEMENT FOR THE ENTIRE SECTION)

203-226-C Obsolete sculleries removed. New 2015 models added.

HOspITAL & LAbORATORY (Tab #11)235 SSU1++ Drawing now updated with missing bowl measurement243 AWHB1414P-00 Addition of wheelchair accessible statement252-A HWS6810P-3 NEW product252-B HWS0610P-3 NEW product

wAsH bAsINs (Tab #12)270 WHB2221-UC Change to description for clarity271 WHB5222-7 Drawing measurement correction from center to

faucet hole of 18" (457 mm), plus note added about related product WHB5222-RS

TYpE 316 LAbORATORY (Tab #14)305 S6810/316P-3 Correction now made to model name at top 308 LBS9407/316P-3 Duplicate page 308 removed320 D6410/316PCB-1 Drawing updated322 LBD6408/316P-1 Drawing updated323 LBD6410/316PCB-1 Drawing updated

wAsHROOM ACCEssORIEs (Tab #16)365 ESD80BOTTLE1 New spare part for SD80 series390 F850-1824/30/36, F850-2430/36 391 F3200-1824/30/36, F3200-2430/36392 F3200FT-1630/1830/1836/2436393 F3300-1824/1830/2436Inclusion of addtional measurements, Correction to product series name in header to F3300++

sECuRITYwARE (Tab #17)

dRINkING FOuNTAINs (Tabs #18-23)If you have a printed package, remove the divider and all content pages as these product ranges are not available in the U.S.

***** FINAL COMMENT*****Not all models are certified at this time so specs will be

created once we have certifications. HWS-RS-00, HWSW2420-3, WHB5222-RS to come



2015 dELETIONs

1038HWS1518P-00LBD6407/316P-1LBD6407/316P-1/1LBD6407/316P-1/3LBD6407/316P-1/4LBS4607/316P-3LBS4607/316P-3/1LBS4607/316P-3/3LBT8607-1

LBT8607-1/1LBT8607-1/3OF100OV1619/5OV1619/6OV1821/5OV1821/6OV19/5RC5/316S6407/316P-3

V1619/5V1619/6V1821/5V1821/6V19/5V19/5DV19/6WHBS161709 modelsXINX models

2016 dELETIONsThe following items starting with 2016 deletions are now obsolete with no inventory remaining.

CMPX150CMPX560LBS4610/316P-1/2LBS4610/316PC-3/2LBS6407/316P-3LBS6407/316P-3/1LBS6407/316P-3/3All MT modelsOV19/6RODX650 to 654RODX687XINV700SSL2424-5SSL2424-5/2SSL2424R-5SSL2424R-5/2SSL2424L-5SSL2424L-5/2SSL2424LR-5SSL2424LR-5/2SSL2430-1SSL2430-1/2SSL2430-5SSL2430-5/2SSL2436-1SSL2436-1/2SSL2436-5SSL2436-5/2

SDL2430-1SDL2430-1/2SDL2430-5SDL2430-5/2SDL2436-5SDL2436-5/2SDL2442-1SDL2442-1/2SDL2442-5SDL2442-5/2SDL2442LR-1SDL2442LR-1/2SDL2442LR-5SDL2442LR-5/2SDL2448-5SDL2448-5/2SDL2448LR-5SDL2448LR-5/2STL2445-1STL2445-1/2STL2445-5STL2445-5/2STL2454-5STL2454-5/2STL2472-5STL2472-5/2RSL2418-5RSL2418-5/2

RSL2418R-5RSL2418R-5/2RSL2418L-5RSL2418L-5/2RSL2418LR-5RSL2418LR-5/2RDL2436-5RDL2436-5/2RDL2436R-5RDL2436R-5/2RDL2436L-5RDL2436L-5/2RDL2436LR-5RDL2436LR-5/2RTL2454-5RTL2454-5/2RTL2454R-5RTL2454R-5/2RTL2454L-5RTL2454L-5/2RTL2454LR-5RTL2454LR-5/2WSL2424-5WSL2424-5/2WSL2424R-5WSL2424R-5/2WSL2424L-5WSL2424L-5/2

WSL2424R-5WSL2424LR-5WSL2424LR-5/2WSL2430-1WSL2430-1/2WSL2430-5WSL2430-5/2WSL2436-1WSL2436-1/2WSL2436-5WSL2436-5/2WDL2448-5WDL2448-5/2WDL2448R-5WDL2448R-5/2WDL2448L-5WDL2448L-5/2WDL2448LR-5WDL2448LR-5/2WDL2460-1WDL2460-1/2WDL2460-5WDL2460-5/2WDL2472-1WDL2472-1/2WDL2472-5WDL2472-5/2WTL2445-1

WTL2445-1/2WTL2445-5WTL2445-5/2WTL2454-5WTL2454-5/2WTL2472-5WTL2472-5/2WTL2472R-5WTL2472R-5/2WTL2472L-5WTL2472L-5/2WTL2472LR-5WTL2472LR-5/2

2014 dELETIONsD6410/316PCB-3CMPX538WFCMPX538WF-RDHC-1W-18PHC-1W-36PHC-1W-30PHC-1W-24PHC-1W-3030PLBLDC1737P-1LBLDC1737P-1/1LBLDC1737P-1/2LBLDC1737P-1/3LBLDC1943P-1LBLDC1943P-1/1LBLDC1943P-1/2LBLDC1943P-1/3LBRDC1737P-1LBRDC1737P-1/1LBRDC1737P-1/2LBRDC1737P-1/3LBRDC1943P-1LBRDC1943P-1/1

LBRDC1943P-1/2LBRDC1943P-1/3M1216M1224M2449ALBS6805/316-1ALBS6805/316-1/1ALBS6805/316-1/3LBD6407/316-1LBD6407/316-1/1LBD6407/316-1/3LBD6407/316-1/4LBD6408/316-1LBD6408/316-1/1LBD6408/316-1/3LBD6408/316-1/4LBS4607/316-1LBS4607/316-1/1LBS4607/316-1/3LBS4607/316-3LBS4607/316-3/1LBS4607/316-3/3

LBS6407/316-1LBS6407/316-1/1LBS6407/316-1/3LBS6407/316-3LBS6407/316-3/1LBS6407/316-3/3LBS6807/316-1LBS6807/316-1/1LBS6807/316-1/3LBS6808/316-1LBS6808/316-1/1LBS6808/316-1/3LBS6810/316-1LBS6810/316-1/1LBS6810/316-1/3LBS6810/316-3LBS6810/316-3/1LBS6810/316-3/3LBS9407/316-1LBS9407/316-1/1LBS9407/316-1/2LBS9407/316-3

LBS9407/316-3/1LBS9407/316-3/2LBSDBL6810/316-1LBSDBL6810/316-1/1LBSDBL6810/316-1/3LBSDBR6810/316-1LBSDBR6810/316-1/1LBSDBR6810/316-1/3S6407/316-1S6407/316-3S6808/316-1S6810/316-1S6810/316-3S9106/316-1S9106/316-3S9407/316-1S9407/316-3

Commercial Products

SPECIFICATIONSUPDATED April 2016

1 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Product Certification, Nomenclature Guide, Limited Buyer Warranty, Corrosion Resistance Information, Waste Fitting Options , Hole Drilling Configuration Charts, Custom Fabrication Instructions, Franke Innovations

2 Single Compartment Topmount Sinks . . . . . . . . . . . . . . . . . . 17Ledgeback and No Ledge, 18 & 20 Gauge

3 Double Compartment Topmount Sinks . . . . . . . . . . . . . . . . . 98Ledgeback and No Ledge, 18 & 20 Gauge

4 Triple Compartment Topmount Sinks . . . . . . . . . . . . . . . . . . 126Ledgeback and No Ledge, 18 & 20 Gauge

5 Classroom Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13218 Gauge Single Sinks, Art Room Sinks and Childen’s Wash ‘n Play Washino Sinks

6 Undermount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16618 Gauge, Single and Double Compartment

7 Chapter 7 (Vanities) of the printed specifications package do not apply for USA customersIf you have a printed specification package, remove vanities divider and trash contents of this chapter which do not apply to USA customers any longer

8 Drainboard Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193Single and Double Compartment, Right and Left Hand Models

9 Scullery Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199Single, Double & Triple Compartment Classic Sculleries

Table of Contents

Specifications and measurements are subject to change with updates to product design . Visit our website for updates .

www.franke-commercial.com 161562 | SPECIFICATIONS | UPDATED 2016


10 Scullery - Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203S Series Service Sculleries, R Series Restaurant Sculleries, and W Series World Class Sculleries

11 Hospital and Laboratory Sinks . . . . . . . . . . . . . . . . . . . . . . . 227Canadian Health Care Facilities Test Report, Premium, Single, Double and Triple Basins, With and Without SANIGUARD® Product Protection, Product Accessories

12 Wash Basins & Trough Sinks . . . . . . . . . . . . . . . . . . . . . . . . . 253Designer Wash Basins, Clinical Hand Wash Basins, Wall Hung Hand Wash Basins and Troughs, and a Pedestal Wash Basin

13 Utility Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281Corrosion Resistant Floor Mount Mop Sinks, Anti-splash Rim Sewage Sampling Sinks, Trough Sinks, Round and Rectangular Sacrarium Sinks

14 Type 316 Laboratory Sinks . . . . . . . . . . . . . . . . . . . . . . . . . . 296Type 316 Corrosion Resistant Topmount Sinks, Undermount Sinks, Drainboard Sinks, Cup Sinks, Sculleries, Art Sinks, and Wall Hung Basins

15 Urinals and Toilets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344Low Flush Stainless Steel Urinal and Toilets

16 Washroom Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349Robust Rodan Stainless Steel and EXOS Glass Front Accessories, Clothing and Curtain Hooks, Curtains and Stainless Steel Grab Rails

17-23 Chapters 17-23 of the printed specifications package do not apply for USA customersRemove dividers and trash the contents of these 7 chapters

24 Quick Find Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393Terms Alphabetized Quick Find Guide

Specifications and measurements are subject to change with updates to product design . Visit our website for updates .

61562 | SPECIFICATIONS | REV.2016 3


www.franke-commercial.com

PRODUCT CERTIFICATION

Franke is committed to product certification. We strive to have all our products designed and certified to meet all applicable standards.

Certification marks are important as they offer peace of mind to installers, specifiers and consumers alike that the product has

been independently tested and certified to meet the recognized standards for safety and/or performance, of the recognized certification bodies in North America.

IAPMO (International Association of Plumbing and Mechanical Officials), NSF, UL (Underwriters Laboratories) and CSA (Canadian Standards Association) are among the leaders for Standards Development Organizations in North America. These organiza-tions are accredited by ANSI American National Standards Institute (ANSI) and Stan-dards Council of Canada (SCC) to certify plumbing fixtures.

461562 | SPECIFICATIONS | REV.2016

DrainboarD SinkS

LBSDBR Ledge back single with drainboard on right side LBDDBR Ledge back double with drainboard on right sideLBSDBL Ledge back single with drainboard on left side LBDDBL Ledge back double with drainboard on left side Scullery SinkS

SL Classic Series, single compartment RSL R-Series, single compartmentDL Classic Series, double compartment RDL R-Series, double compartmentTL Classic Series, triple compartment RTL R-Series, triple compartmentSSL S-Series, single compartment WSL W-Series, single compartmentSDL S-Series, double compartment WDL W-Series, double compartmentSTL S-Series, triple compartment WTL W-Series, triple compartment

oTHer

UCS Undermount single sink WSS Wall hung service sinkUCD Undermount double sink FSS Floor service/mop sinkSSU Surgical scrub station SSS Sewage sampling sinkWHB Wall hung hand wash basin RS/SS Sacrarium sinkFWHB Pedestal hand wash basin OC6/RC6 T316 cup sinkWT Wall hung basin CMPX UrinalWTS Wall trough sink

claSSroom SinkS

LBLS Ledge back & left, single compartment LHS Opposing ledges, left & right only, single compartmentALBLS Wheelchair accessible/ADA compliant ledge back & left ,

single compartmentALHS Wheelchair accessible/ADA compliant,

opposing ledges,left & right only, single compartmentLBRS Ledge back & right, single compartment LRS Ledge right side only, single compartmentALBRS Wheelchair accessible/ADA compliant ledge back & right,

single compartmentALRS Wheelchair accessible/ADA compliant,

ledge right side only,single compartmentLBLRS Ledge back, left & right, single compartment LBLDC Ledge back & left, double compartmentALBLRS Wheelchair accessible/ADA compliant,

ledge back,left & right, single compartmentLBRDC Ledge back & right, double compartmentART Large artroom single sink without faucet ledge

EXAMPLE: Single, Classroom, Double, Triple and Undermount Sink

Model Sink / Bowl Configuration Bowl Dimensions Gauge Waste Option

With or Without ledge?

SingleDouble,Triple?

Width(Front

to back)

length(left

to right)

Depth

lbS6808-2 lb(Ledge Back)

S(Single bowl)

6(16")

8(18")

08(8")

*(20 ga)

-2 (3 ½" [89mm] crumb cup with integral overflow)

lbT8610P-1 lb(Ledge Back)

T(Triple bowl)

8(18")

6(16")

10(10")

P(18 ga)

-1 (3-1/2" [89mm] crumb cup)

lbS9407-3 lb(Ledge Back)

S(Single bowl)

9(9 1/2")

4(14 1/2")

07(7")

*(20 ga)

-3 (1-1/2" [38mm] duplex waste assembly)

lblS4608P-1 lbl(Ledge Back & left)

S(Single bowl)

4(14")

6(16")

8(8")

P(18 ga)

-1 (3-1/2" [89mm] crumb cup)

* 20 gauge unless otherwise indicated by the letter "P" for single, classroom, double, triple & undermount sinks

WaSHroom acceSSorieS

ACG Corner guard QC 1-1/4" diameter concealed flange grab barCH Curtain hook RODX Rodan series with satin finishCM Back rest with anchoring covers SD Soap dispenserCR Curtain rod STRX Stratos series garmet hook with satin finishCV Curtain - vinylEXOS Complimentary product range

General Information 2016Nomenclature Guide - Sinks and Washroom Fixtures

DroP-in SinkS

S Single sink without faucet ledge D Double sink without faucet ledgeLBS Ledge back single sink LBD Ledge back double sinkAS Wheelchair accessible/ADA compliant single sink

without faucet ledgeT Triple sink without faucet ledge

ALBS Wheelchair accessible/ADA compliant ledge back single sink LBT Ledge back triple sink


Products are warrantied against manufacturer's defects.

If a product is defective for normal purposes Franke Commercial will provide to the buyer free of charge a replacement product of equal model. A product can be repaired or replaced by returning it to the place of pur-chase. All costs of such replacement shall be borne by the buyer.

Franke Commercial shall not be liable under this warranty where the product has been used for abnormal purposes or improperly installed or has damage resulting from abuse such as heavy impact, dropped objects or otherwise. Franke Commercial shall not be liable for any inconven-ience or expense for material or labour related to removal or replacement of the defective product, or for any loss or damage to any person or property whatsoever resulting from the defective product.

The provisions of this warranty are not transferable and are in addition to and not in modification of or subtraction from any applicable statutory warranties, rights or remedies.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.

This warranty gives specific legal rights, and you may also have other rights which vary from province to province (or state to state).

Warranty overview

- Stainless steel topmount sinks and hand wash basins 5 year warranty

- EXOS Miranit resin-bonded mineral material wall mount sinks 2 year warranty

- Stainless steel Rodan and Exos washroom accessories 5 year warranty, with exception of soap dispensers and electronic parts - 2 years

- Miscellaneous washroom accessories, ie) grab rails, curtain hooks, 1 year warranty

- Stainless steel urinals 2 year warranty

- Custom and fabricated products, including sculleries, mops, sewage sampling sinks 1 year warranty

- Drain fittings and waste parts 1 year warranty

LIMITED BUYER WARRANTY

every Franke commercial sink is guaranteed to be suitable for any normal purpose for which it is intended and without defects in material or workmanship for the following periods of time, provided is has been installed and maintained according to Franke commercial instructions.


Substance (Conditions - strength & temperature) T316 T304 T302

Acetic Anhydride (90%, aerated, 180 degrees F) B C C Aluminum Fluoride (5%, 70 degrees F) B C C Aluminum Sulfate (10%, boiling) A B B Ammonium Bromide (5%, 70 degrees F) B C C Ammonium Sulfate (10%, boiling) A B B Bleaching Powder (dry) A C C Butyric Acid (saturated, boiling) A B B Calcium Bisulfite (aqueous solution, 300 lbs. pressure, 390 degrees F) B C C Calcium H droxide (50%, boiling) B C C Calcium Hypochlorite (saturated, 70 degrees F) A C C Chloracetic Acid (70 degrees F) B C C Chlorine Gas (moist, 70 degrees F) B C C Chromic Acid (50%, boiling) B C C Ferric Chloride 1%, 70 degrees F) B C C Fluosilicic Acid 90%, 70 degrees F) B C C Formic Acid (10%, 180 degrees F) A C C Hydrochloric Acid (1% or less, 70 degrees F) B C C Iodine (dry, 70 degrees F) A C C Lactic Acid (10%, 150 degrees F) B C C Mercuric Chloride (2%, 70 degrees F) B C C Oxalic Acid (2.5%, 180 degrees F) A C C Phosphoric Acid (80%, 230 degrees F) B C C Salt Brine (70 degrees F) A C C Sauerkraut Brine (70 degrees F) A C C Sodium Hydroxide (melting, 600 degrees F) B C C Stannic Chloride (5%, 70 degrees F) B C C Sulfuric Acid (5%, 100 degrees F) A C C Zinc Chloride (saturated, 70 degrees F) B C C

In the presence of oxygen, stainless steel forms a protective chromium oxide layer. This is due to the addition of chro-mium in excess of 11.5% during the alloying stage. The further addition of nickel, in excess of 7%, gives superior corrosion resistance to the 300 series.

Maximum corrosion resistance is obtained with the addition of molybdenum to form TYPE 316, designed to resist attack under highly corrosive conditions.

As implied, stainless steel requires oxygen in order to be stainless. There are ways to make oxygen more plentiful. For example, an acid solution which might otherwise corrode the steel, can be aerated to maintain the protective film.

Corrosion, or rusting, often reported soon after installation, has two main causes:

- Contact Corrosion occurs when a piece of common carbon steel, copper, brass or other foreign material contacts the sink and destroys the passive protective film.

- Pitting or Pinhole Corrosion occurs when chlorides attack the steel forming pits where galvanic cells are created. Acid chlorides are particularly severe, but even chlorine bleach can cause failure. The sink should be rinsed thoroughly after such contact. Type 316 steel should be specified if the sink will be subject to such conditions.

Chemical DataThe chemical data below should be used as a guide to determine the type of stainless steel that will be appropriate for the application. The rating system denotes the level of resistance to corrosion for the different types of stainless steel (A = fully resistant, B = fairly resistant, C = not resistant).

For applications involving chemicals or conditions not listed below, please consult your local Franke Commercial sales representative. The following information is also available on our website at: http://www.franke-commercial.com

General InformationCorrosion Resistance Information




MODEL DESCRIPTION

3.5" WASTES3-1/2" (89mm) crumb cup basket strainer with 1-1/2 x 3" (38 x 76 mm) brass tailpiece. certified to aSme a112.18.2-2005/cSa b125.2-2005.

1120/316 Twist seal crumb cup, T316 steel for enhanced corrosion resistance

1130 Easy Seal® crumb cup, T302 steel

1130/60 Case lot - 60 units, Easy Seal® crumb cup with tailpieces

1140 ♦ Pull up crumb cup, T304 steel

1140/60 ♦ 60 pack of 1140 pull up basket strainers

WaSTe FiTTinG: 3-1/2" (89mm) vandal resistant grid stainless steel strainer and tailpiece

1300G Type 302 stainless steel

1200/316G Type 316 (EN1.4401 17/12/2) steel for enhanced corrosion resistance

1.5" WASTESDuPleX WaSTe: 1-1/2" (Dn38) x 3" (76.2 mm) tailpiece and rubber stopper

100 Type 302 (CNS 18/8) stainless steel strainer and tailpiece

200/316Type 316 (EN1.4401 17/12/2) stainless steel strainer and type 316 tailpiece with rubber stopper

PerForaTeD GriD only

100-1/302 Strainer for 1-1/2" drain

VanDal reSiSTanT GriD STrainer WiTH 1-1/2" x 3" (38x76.2mm) TailPiece

100-NR Type 302 (CNS 18/8) stainless steel, with brass tailpiece

200/316-NRType 316 (EN1.4401 17/12/2) stain-less steel, with type 316 stainless steel tailpiece

1.25" WASTES

GriD STrainer: 1-1/4" (32mm) with removable tailpiece. aSme a112.18.2-2005/cSa b125.2-2005

125GWK 1-1/4" Grid strainer, no overflow

125GOWK 1-1/4" Grid strainer, with overflow

125GWK-MOD 1-1/4" Grid strainer for WHB5222, no overflow

♦ New Product

MODEL DESCRIPTION

WASTE FITTING REPLACEMENT PARTS

310-1 10" Standpipe for 1-1/2" wastes, type 304 (18/10) stainless steel

312-1 12" Standpipe for 1-1/2" wastes, type 304 (18/10) stainless steel

315-7 Tailpiece locknut

315-8 Tailpiece gasket

1047 Integral Waste Assembly

WaSTe FiTTinG: 1-1/2" x 3" (38mm x 76mm) tailpiece, type 316 (en1.4401 17/12/2) stainless steel

315-9 Brass tailpiece

315-9/316 Type 316 (EN1.4401 17/12/2) stainless steel tailpiece

WHB5222-PW ♦Pyramid shaped waste for WHB5222 basin

General InformationWASTE FITTING OPTIONS for Sinks and Wash Basins

61562 | SPECIFICATIONS | 2014 8



ø1 1/2"(38mm)

ø1 1/2"(38mm)

4" (102mm)

SINGLE LEDGEBACK

/1 /21 hole 2 hole, 4" centerset

ø1 1/2"(38mm)

8" (204mm)

/33 hole, 8" centerset

ø1 1/2" (38mm)

ø1 1/2" (38mm)

DOUBLE LEDGEBACKø1 1/2"(38mm)

8" (204mm)

/1

/31 hole 3 hole, 8" centerset

/43 hole, 8" centerset, plus 1 hole 4" to the right

12" (306mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

TRIPLE LEDGEBACK

ø1 1/2"(38mm)

8" (204mm)

/1

/3

1 hole

3 hole, 8" centerset

/43 hole, 8" centerset, plus 1 hole 4" to the right

12" (306mm)

General InformationHole Drilling Configurations - Single, Double and Triple Sinks


CLASSROOM - LBLDC1743P-1 SERIES

ø1 1/2" (38mm)

/2 /4

CLASSROOM - LBRS SERIES

3 hole, 8" centersetbubbler hole on right ledge

1 holebubbler hole on right ledge

ø1 1/2"(38mm)

8" (204mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

1 hole 2 hole, 4" centerset 3 hole, 8" centerset

1 hole diagonal punching 1 hole diagonal punching

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

CLASSROOM - LHS SERIES

/2L /4L1 hole

bubbler hole on left ledge3 hole, 8" centerset

1 bubbler hole on left ledge

/2R /4R1 hole

bubbler hole on right ledge3 hole, 8" centerset

bubbler hole on right ledge

ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

8"(204mm)

/2DR /2DL

bubbler hole on right ledge bubbler hole on left ledge

ø1 1/8" (29mm)

ø1 1/8" (29mm)

8"(204mm)

BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

/2 /43 hole, 8" centerset

bubbler hole on left ledge1 hole

bubbler hole on left ledge

CLASSROOM - LBLS SERIES

ø1 1/2"(38mm)

8" (204mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

CLASSROOM - LRS SERIES


/11 hole


ø1 1/2"(38mm)

4"(102mm)

ø1 1/2"(38mm)

8"(204mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

/5R/3R2 single holes 3 hole, 8" centerset, 1 hole left

bubbler hole right ledgebubbler hole right ledge

CLASSROOM - LBLR SERIESø1 1/2"(38mm)

8" (204mm)

ø1 1/2"(38mm)

8" (204mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

/5L/3L2 single holes 3 hole, 8" centerset, 1 hole right

bubbler hole left ledgebubbler hole left ledge

ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/2"(38mm)

4" (102mm)

/11 hole

ø1 1/2" (38mm)

/2 2 hole, 4" centerset

ø1 1/2"(38mm)

8" (204mm)

/3 3 hole 8" centerset

ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

3 hole 8" centerset

CLASSROOM - LBRDC1943P-1 SERIES

ø1 1/2"(38mm)

4" (102mm)

/11 hole

ø1 1/2" (38mm)


ø1 1/2"(38mm)

8" (204mm)

/3

ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/2"(38mm)

3 hole 8" centerset

CLASSROOM - LBRDC1743P-1 SERIESø1 1/2"(38mm)

4" (102mm)

/11 hole

ø1 1/2" (38mm)


ø1 1/2"(38mm)

8" (204mm)

/3

ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

3 hole 8" centerset

CLASSROOM - LBLDC1943P-1 SERIESø1 1/2"(38mm)

4" (102mm)

/11 hole

ø1 1/2" (38mm)


ø1 1/2"(38mm)

8" (204mm)

/3

ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

General InformationHole Drilling Configurations - Classroom Sinks

1061562 | SPECIFICATIONS | REV.2016 www.franke-commercial.com


Custom fabriCation Capabilities

Modifications can be made to most of our standard catalogue products. We offer a wide range of custom products. Franke has full custom stainless steel fabrication capabilities for commercial product. We are happy to custom fabricate products to meet your specifications.

- Countertops- Topmount & Undermount Sinks- Drainboard Sinks- Scullery Sinks- Wallmount Hand Wash Stations- Surgical Scrub Stations- Janitorial Mop Sinksor .....

All of our custom fabricated products are polished to a #4 satin finish and can be made to meet the material specifica-tion you require (T304 or T316, 14 to 18 gauge). Continuous weld construction is available for pharmaceutical applica-tions if required.

If you can sketch it, we can build it.

As a general rule of thumb, the more information we receive with custom fabricated product requests, the better!

The following pages provide explicit details for requesting specific types of custom fabricated products.

SANIGUARD® Product ProtectionThe addition of SANIGUARD® product protection is available for sinks in this catalogue as well as custom fabricated sinks. However, we only recommend this coating be added to hand wash basins. See our SANIGUARD® Information page for more details about this product protection. For a quotation please call or email our Customer Service Manager, Tracy Irvine.

[email protected]

1161562 | SPECIFICATIONS | 2014 www.franke-commercial.com


application

□ Drop-In □ Undermount

With faucet ledge:

□ Yes □ No

sinK boWl #1Compartment size

Front-to-Back: Left-to-Right

Depth Position (if multiple bowls)

Drain fitting: □ 3 1/2" (includes 1130 waste fitting)

□ 1 1/2" (includes 100 waste fitting)

□ 1 1/4" (accepts 1 1/4" drain, not included)

□ Other

note: Type 316 wastes are supplied with Type 316 sink bowls.

Drain position: □ Center □ Center-Back

□ Back-Right □ Back-Left

additional Drain options:

□ Integral Overflow

□ Standpipe (1 1/2" drains only)

□ Standpipe & Corner Guard (1 1/2" drains only)

Drainboard:

Is a sloped drainboard required:

□ None □ Left

□ Right □ Left & Right

Note: Drainboard measures 21" left to right.

overall Dimensions

Allow a minimum of 1" for rims

Allow a minimum of 4" for faucet ledge

Front-to-Back: Left-to-Right:

Faucet Hole Drilling Requirements:

note: Please include the location of the holes, the number of holes required and the diameter of the holes. Provide a sketch if necessary.

builD Your sinK

sinK boWl #2 (if required)Compartment size



sinK boWl #3 (if required)Compartment size



type of stainless steel □ T304 □ T316

steel Gauge □ 18 □ 16 □ 14

□ Other

bowl radius:

Only 1" bowl radius is available.

bowl specs & Drainboard options ChecklistCustom fabrication



tops are available in all sizes and configurations, with sink bowls integrally welded into the top. tops may be flat or slope to the sink. all sloped tops have a 6mm drop to the sink bowl.

a. tHe sinK Compartment speCifiCations:Compartment size



type of stainless steel □ T304 □ T316

steel Gauge □ 18 □ 16 □ 14

□ Other

Drain fitting □ 3 1/2" (includes 1130 waste fitting)



□ Other


Drain position □ Center □ Center-Back


additional Drain options

□ Integral Overflow

□ Standpipe (1 1/2" drains only)

□ Standpipe & Corner Guard (1 1/2" drains only)

b. tHe Countertop Details:The position of the sink compartments will be centered horizontally unless specified otherwise.

Top should be: □ Flat □ Slope to the sinknote: the maximum sloped area that can be created from the sink bowl outward is 32" (81cm). The remaining top surface to the edge of the sink will be flat.

backsplash Location(s): □ Back □ Left □ Right

Backsplash Height(s):

Backsplash Style (see Custom Sink Options page)

rim style (see Custom Sink Options page)

overall Dimensions of the top

Allow a minimum of 2" for rims.

Allow a minimum of 1 1/2" for splashes.

Allow a minimum of 4" for faucet ledge.

Front-to-Back:

Left-to-Right:

top is to be installed onto

□ Cabinet - existing or supplied by others

□ Cabinet - to be supplied by Commercial Systems (please provide sketch)

□ Legs material: □ Stainless Steel □ Chrome Plated

□ Wall with wall hanger and wall mount brackets

Dimension from floor to work surface:

Core material □ Particle Board

□ Plywood

□ Channel Construction

□ Other (specify)

Any other information or requirements should be provided in the form of a sketch with written detail. We will review all requests and request clarification if required.

Custom Countertop CHeCKlistCustom fabrication



a. tHe sinK Compartment speCifiCations: Compartment size

Front-to-Back:

Left-to-Right:

Depth:

# of Compartments required:

type of stainless steel □ Type 304

□ Type 304, all radius coved corners

□ Type 316

steel Gauge □ 18 □ 16 □ 14

□ Other (specify)

Drain fitting □ 3 1/2" (includes 1130 waste fitting)


□ 1 1/2" duplex complete with stand pipe and guard


□ Other (specify)


in addition to our standard scullery sinks, we offer scullery sinks fabricated to your specification.

Custom scullery CHeCKlistCustom fabrication

b. tHe DrainboarD speCifiCations:Drain position □ Center □ Center-Back


Drainboard

note: Drainboard measures 21" left to right.

Is a sloped drainboard required? □ None □ Left

□ Right □ Left & Right

What type of edges (rims) are required?

# of edges (considering number of backsplashes):

□ Standard 1 5/8" rolled edges

□ Other Type:

Dimensions:

backsplash

Backsplash Location(s): □ Back □ Left □ Right

Backsplash Height(s):

Backsplash Style:

overall Dimensions of the top

Front-to-Back:

Left-to-Right:

legs □ Stainless Steel □ Chrome Plated

leg Height □ Standard 35" Other (specify)

faucet Hole Drilling requirementsPlease include the location of the holes, the number of holes required and the diameter of the holes. Provide a sketch if necessary.



Rim Style OptionsBack / Side Splash Options

( "

Custom Sink OptionsCustom Fabrication



For customization of any of our standard catalogue products, please provide us with a sketch or a copy of our specification sheet indicating all changes and modification required.

Service Sinks

Sewage Sampling Sinks

Mop Sinks

Pedestals/Wall Hung Basins

Wall Mount Trough Sinks

Other Custom ProductsCustom Fabrication

3. ELIMINATES AREAS FOR BACTERIA TO GROW

The sink is coated with an antimicrobial surface treatment called SANIGUARD®, which

incorporates silver ion technology helping reduce the spread of harmful bacteria. SANIGUARD® is applied to the sink by a powder coating process.

Side splash guards prevent water from splashing outside unit.

No flat surfaces on which water can collect.

Faucet ledge is sloped to reduce free-standing water.

Target area for hand washing to contain splashing water within unit. Sink depth is 10" (254 mm).

Not only is the sink bottom sloped positively to be free draining, but the entire basin is free of concealed areas allowing for easy cleaning of exposed surfaces; further eliminating areas for harmful bacteria to collect.

2. CONTAINS SPLASHING and ELIMINATES FREE STANDING WATER

This HWS1420P-00 comes complete with a 26½" (673 mm) high backsplash to which a soap dispenser and paper towel dispenser would be mounted. This backsplash also negates the need for an additional splashguard mounted behind the sink.

1. ROBUST STAINLESS STEELAn incredibly durable product, yet it lightweight.

canada'S 1St & only z8000 comPliant Hand Hygiene Sink SeRieS

4. EASY and EFFICIENT TO INSTALLA separate wall carrier is not required for installation. It is quick and easy; perfect for multiple room installations.

3. Continued.....The sink also incorporates a special waste design. The waste is an integral 1 ½" waste (DN40) hole with integrally welded tailpiece that will not accept a standard waste plug, effectively eliminating an area for bacteria to collect. The waste is positioned in the left-rear so that water does not splash directly into the waste.

FRanke innoVationSat FRanke kindRed canda limited

HWS1420P-1 Introduced 2011

HWS1414P-00

HWSS1518P-00

16-a61562 | SPECIFICATIONS | REV.2016

All new for 2014, Franke EZ TORQUE™ fasteners will ship pre-installed on the sink! The simplicity of this method almost eliminates the need for instructions. It is no longer necessary to read where to fasten the clips onto the sink. Missing clips are no longer an issue and the sink drops quickly and neatly into the cut-out. The fastener's red colour makes it easy to locate inside the cabinet. It’s patented and revolutionary design allows you to tighten the clips with one hand through the entire installation process. That’s it, installing a sink with EZ Torque is quick and easy.

The Franke EZ TORQUE™ is a robust design with steel componentry, and high-performance polymer resin which unite together to produce a fastener superior in strength and performance to its predecessor.

Franke EZ TORQUE™ fasteners are used to hold the rim of the sink ledge tight to the countertop. This new method replaces the industry standard’s universal mounting system which hasn’t changed much over the past thirty years. The long standing tradition has been for an installer to hang the supplied fasteners at specified locations around the sink ledge as indicated in the instructions. Although fasten-

ers and instructions are included within the product box, on occasion items go missing on the job site which can negatively impact the process. The sink and clips must be carefully

lowered through a cut-out hole in the coun-tertop. The fastening clips dangle loosely

on the sink requiring careful manipula-tion to ensure none are knocked off in

the process. Once in place a drill is held in one

hand while the other is used to locate and steady each clip from underneath to tighten. This method is somewhat sloppy and may lead the installer to either kneel down, hunch over or even lay down, face up underneath the cabinet to locate, hold steady and finally tighten the fasteners.

the Franke ez toRQUe™ Fastening SystemThe FRANKE EZ TORQUE™ fastener is Franke Kindred Canada’s newest innovation for 2014. Product engineers at Franke Kindred Canada work hard responding to industry demands for new sink designs and accessories and now they have found a way to improve things under the counter too! Finally...a solution that focuses on sink installation, making it faster and easier to get the job done right, in less time than the competition!

FRanke innoVationSat FRanke kindRed canda limited

EZ Torque Clamp Introduced 2015

16-B61562 | SPECIFICATIONS | REV.2016

Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



Single compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Overall front to back: 11 1/4" (286 mm) Overall left to right: 13 5/8" (346 mm)

Bowl front to back: 9 1/4" (235 mm) Bowl left to right: 11 5/8" (295 mm) Bowl depth: 6" (152 mm)

S9106-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 2.3 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-

consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), cUPC approval

S9106-1Single Compartment Topmount Sinks

Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






S9106-3Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance.

Center waste location, includes 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 2.3 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






S9407-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

TechnicAl dATA




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





Bowl front to back: 14" (356 mm) Bowl left to right: 12" (305 mm) Bowl depth: 6" (152 mm)

S4206-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 3.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






S6810-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

TechnicAl dATA




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



S6410PCB-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

TechnicAl dATA



S6410PCB-1Single Compartment Topmount Sinks

Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






AS6105P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA


consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points), wheelchair compliant, cUPC approval

AS6105P-1Single Compartment Topmount Sinks

Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






S6108P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

TechnicAl dATA



S6108P-1Single Compartment Topmount Sinks

Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






S7310P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

TechnicAl dATA




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






S7312P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

TechnicAl dATA



S7312P-2center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with overflow

TechnicAl dATA

Type of basin Single Compartment Gross weight 8.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow yes Certificates and approvals pre-consumer recycled 31%, post-


S7312P-1, S7312P-2Single Compartment Topmount Sinks

Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



LBS9106-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 2.4 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

LBS9106-1/1, 1 hole, 1 1/2" diameter LBS9106-1/2, 2 hole, 1 1/2" diameter, 4" centers LBS9106-1, Custom (non-returnable)

LBS9106-1Single Compartment Topmount Sinks

Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






LBS9106-3Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 2.4 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






LBS9407-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

TechnicAl dATA



Model opTionS



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






LBS9407-3center waste location, includes 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece

TechnicAl dATA



Model opTionS



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






LBS1306-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA



Model opTionS



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



Single compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08

Overall front to back: 17" (432 mm) Overall left to right: 19 1/8" (486 mm)



TechnicAl dATA



Model opTionS

LBS2708-1/1, 1 hole, 1 1/2" diameter LBS2708-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS2708-1, Custom (non-returnable)


Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA



Model opTionS



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






ALBS6405-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 3.5 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

ALBS6405-1/1, 1 hole, 1 1/2" diameter ALBS6405-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset ALBS6405-1, Custom (non-returnable)

ALBS6405-1Single Compartment Topmount Sinks

Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






ALBS6805-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Left rear waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 4.7 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position rear left Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

ALBS6805-1/1, 1 hole, 1 1/2" diameter ALBS6805-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset ALBS6805-1, Custom (non-returnable)

ALBS6805-1Single Compartment Topmount Sinks

Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




Overall front to back: 20 1/2" (521 mm) Overall left to right: 20" (508 mm)


LBS6807-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

TechnicAl dATA

Type of basin Single Compartment Gross weight 5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS


LBS6807-2center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with overflow

TechnicAl dATA

Type of basin Single Compartment Gross weight 5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow back Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

LBS6807-2/1, 1 hole, 1 1/2" diameter LBS6807-2/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS6807-2, Custom (non-returnable)

LBS6807-1, LBS6807-2Single Compartment Topmount Sinks

Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA

Type of basin Single Compartment Gross weight 5.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS


LBS6808-2center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with overflow

TechnicAl dATA

Type of basin Single Compartment Gross weight 5.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow yes Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

LBS6808-2/1, 1 hole, 1 1/2" diameter LBS6808-2/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS6808-2, Custom (non-returnable)

LBS6808-1, LBS6808-2Single Compartment Topmount Sinks

Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA

Type of basin Single Compartment Gross weight 6 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA



Model opTionS



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA



Model opTionS

LBS7508-1/1, 1 hole, 1 1/2" diameter LBS7508-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS7508-1 , Custom (non-returnable)


Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



Wheelchair accessible, single compartment, self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



ALBS9405P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 3.2 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

ALBS9405P-1/1, 1 hole, 1 1/2" diameter ALBS9405P-1/2, 2 hole, 1 1/2" diameter, 4" centers ALBS9405P-1/1, Custom (non-returnable)

ALBS9405P-1Single Compartment Topmount Sinks

Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






ALBS9406P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA



Model opTionS

ALBS9406P-1/1, 1 hole, 1 1/2" diameter ALBS9406P-1/2, 2 hole, 1 1/2" diameter, 4" centers ALBS9406P-1, Custom (non-returnable)


Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






LBS9408P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

TechnicAl dATA



Model opTionS

LBS9408P-1/1, 1 hole, 1 1/2" diameter LBS9408P-1/2, 2 hole, 1 1/2" diameter, 4" centers LBS9408P-1, Custom (non-returnable)

LBS9408P-1Single Compartment Topmount Sinks

Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA



Model opTionS



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA



Model opTionS

LBS1308P-1/1, 1 hole, 1 1/2" diameter LBS1308P-1/2, 2 hole, 1 1/2" diameter, 4" centers LBS1308P-1, Custom (non-returnable)


Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






ALBS2705P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment. Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA



Model opTionS

ALBS2705P-1/1, 1 hole, 1 1/2" diameter ALBS2705P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS2705P-1, Custom (non-returnable)


Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA



Model opTionS



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA



Model opTionS

LBS2708P-1/1, 1 hole, 1 1/2" diameter LBS2708P-1/3, 3 hole, 8" centerset, 1 1/2" diameter LBS2708P-1, Custom(non-returnable)


Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






ALBS4405P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA



Model opTionS



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






ALBS4406P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA



Model opTionS



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






LBS4408P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

TechnicAl dATA



Model opTionS

LBS4408P-1/1, 1 hole, 1 1/2" diameter LBS4408P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS4408P-1, Custom (non-returnable)


Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA



Model opTionS



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA



Model opTionS

LBS4608P-1/1, 1 hole, 1 1/2" diameter LBS4608P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS4608P-1 Custom (non-returnable)


Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA



Model opTionS

LBS4610P-1/1, 1 hole, 1 1/2" diameter LBS4610P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS4610P-1, Custom (non-returnable)


Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes







TechnicAl dATA



Model opTionS



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes






LBS9407-3center waste location, includes 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece

TechnicAl dATA



Model opTionS





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA



Model opTionS





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBS6410PCB-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

TechnicAl dATA



Model opTionS

LBS6410PCB-1/1, 1 hole, 1 1/2" diameter LBS6410PCB-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS6410PCB-1, Custom (non-returnable)

LBS6410PCB-1Single Compartment Topmount Sinks



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBS6805P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Left rear waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 5.8 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position rear left Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA



Model opTionS





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBS6105P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment. Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.

TechnicAl dATA



Model opTionS





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA



Model opTionS





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA



Model opTionS

ALBS7305P-1/1, 1 hole, 1 1/2" diameter ALBS7305P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBS7305P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBS7305P-1, Custom (non-returnable)




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA

Type of basin Single Compartment Gross weight 7 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA



Model opTionS

LBS7308P-1/1, 1 hole, 1 1/2" diameter LBS7308P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS7308P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBS7308P-1, Custom (non-returnable)




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA



Model opTionS

LBS7310P-1/1, 1 hole, 1 1/2" diameter LBS7310P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS7310P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBS7310P-1 Custom (non-returnable)




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA



Model opTionS

LBS7312P-1/1, 1 hole, 1 1/2" diameter LBS7312P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS7312P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBS7312P-1, Custom (non-returnable)




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA



Model opTionS





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA



Model opTionS

LBS7808P-1/1, 1 hole, 1 1/2" diameter, LBS7808P-1/3, 3 hole, 8" centerset, 1 1/2" diameter, LBS7808P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBS7808P-1/4, Custom(non-returnable)




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA



Model opTionS





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



D1906-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa

Type of basin Double Compartment Gross weight 4.7 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


D1906-1Double Compartment Topmount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




D6408-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa

Type of basin Double Compartment Gross weight 7.8 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




D8610-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa






Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




D6410PCB-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa

Type of basin Double Compartment Gross weight 9.3 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


D6410PCB-1Double Compartment Topmount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed Easy Claw fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Overall front to back: 18 1/4" (464 mm) Overall left to right: 26 5/8" (677 mm) Overall height: 6" (153 mm)


ALBDC182605P-1This sink is specifically designed for wheelchair accessibility. Unique shape allows for a deeper 6" (152mm) bowl on the left. Smaller bowl on the right is 5" (127mm) deep. The sink can be installed as a drop in or as an undermount. (if undermounting, verify wheelchair clearance as the sink will be mounted below the countertop). We recommend a swivel spout with a remote single lever mixing handle.

Technical daTa

Type of basin Double Compartment Net weight 9 kgType of mounting various types of mounting Waste size DN 90 Waste kit included yes Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of bowls 2 Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTions

ALBDC182605P-1/2 - 2 hole ∅1.5"(38mm) 8"(204mm) Centerset ALBDC182605P-1, Custom(non-returnable)

ALBDC182605P-1Double Compartment Topmount Sinks


Usa: 1-855-526-0503 | [email protected]

Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes


Overall front to back: 22" (559 mm) Overall left to right: 39" (991 mm)


D0814P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa



D0814P-1Double Compartment Topmount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Spillway® between bowls. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



ALBD6405-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Rear corner waste locations, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway

Technical daTa

Type of basin Double Compartment Gross weight 7.2 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position corner Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTions

ALBD6405-1/1, 1 hole, 1 1/2" diameter ALBD6405-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset ALBD6405-1, Custom (non-returnable) ALBD6405-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right

ALBD6405-1Double Compartment Topmount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBD6407-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway

Technical daTa

Type of basin Double Compartment Gross weight 8 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTions

LBD6407-1/1, 1 hole, 1 1/2" diameter LBD6407-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD6407-1/4, 4 hole, 1 1/2" diameter, 4" centers LBD6407-1, Custom (non-returnable)

LBD6407-1Double Compartment Topmount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





Technical daTa

Type of basin Double Compartment Gross weight 8.3 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTions

LBD6408-1/1, 1 hole, 1 1/2" diameter LBD6408-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD6408-1/4, 4 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD6408-1, Custom (non-returnable)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBD6808-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa

Type of basin Double Compartment Gross weight 10.3 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTions

LBD6808-1/1, 1 hole, 1 1/2" diameter LBD6808-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD6808-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBD6808-1, Custom (non-returnable)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





Technical daTa



Model opTions

LBD7508-1/1, 1 hole, 1 1/2" diameter LBD7508-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD7508-1/4, 4 hole, 1 1/2" diameter, 4" centers LBD7508-1, Custom (non-returnable)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



ALBD1305P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa

Type of basin Double Compartment Gross weight 7.5 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTions

ALBD1305P-1/1, 1 hole, 1 1/2" diameter Centered over partition ALBD1305P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBD1305P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBD1305P-1, Custom (non-returnable)

ALBD1305P-1Double Compartment Topmount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBD1306P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa

Type of basin Double Compartment Gross weight 7.9 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTions

ALBD1306P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBD1306P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBD1306P-1, Custom (non-returnable)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10),18-10 stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



LBD1308P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa

Type of basin Double Compartment Gross weight 9.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTions

LBD1308P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBD1308P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBD1308P-1, Custom (non-returnable)

LBD1308P-1Double Compartment Topmount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBD4405P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa

Type of basin Double Compartment Gross weight 9.3 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Spillway yes Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTions





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBD4406P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa



Model opTions

ALBD4406P-1/1, 1 hole, 1 1/2" diameter, centered over partition ALBD4406P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBD4406P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBD4406P-1, Custom (non-returnable)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBD4408P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway

Technical daTa



Model opTions





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBD4410P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa



Model opTions





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBD6405P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste locations, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway

Technical daTa



Model opTions

ALBD6405P-1/1, 1 hole, 1 1/2" diameter ALBD6405P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBD6405P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBD6405P-1, Custom (non-returnable)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBD6406P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway

Technical daTa



Model opTions

ALBD6406P-1/1, 1 hole, 1 1/2" diameter ALBD6406P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset ALBD6406P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right ALBD6406P-1, Custom (non-returnable)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





Technical daTa



Model opTions

LBD6408P-1/1, 1 hole, 1 1/2" diameter LBD6408P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD6408P-1/4, 4 hole, 1 1/2" diameter, 4" centers LBD6408P-1, Custom (non-returnable)




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBD6410PCB-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa

Type of basin Double Compartment Gross weight 14 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTions

LBD6410PCB-1/1, hole, 1 1/2" diameter, centered over partition LBD6410PCB-1/3, 3 hole, 8" centerset, 1 1/2" diameter, centered over partition LBD6410PCB-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBD6410PCB-1, Custom (non-returnable)

LBD6410PCB-1Double Compartment Topmount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBD7505P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa



Model opTions





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBD7506P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece, with spillway

Technical daTa



Model opTions





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





Technical daTa



Model opTions





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBD7510P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa



Model opTions





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





Technical daTa



Model opTions





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





Technical daTa



Model opTions

LBD0814P-1/1, 1 hole, 1 1/2" diameter LBD0814P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD0814P-1, Custom (non-returnable) LBD0814P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Triple compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Complete with waste fittings, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



T6410PCB-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa

Type of basin Triple Compartment Gross weight 28 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


T6410PCB-1Triple Compartment Topmount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Triple compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Complete with waste fittings, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



T8610-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Technical daTa

Type of basin Triple Compartment Gross weight 32 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


T8610-1Triple Compartment Topmount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Triple compartment self rimming drop-in sink with faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Complete with waste fittings, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



LBT6407CB-1

Technical daTa

Type of basin Triple Compartment Gross weight 12.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTions

LBT6407CB-1/1, 1 hole, 1 1/2" diameter LBT6407CB-1/3, 3 hole, 8" centerset, 1 1/2" diameter LBT6407CB-1, Custom (non-returnable)

LBT6407CB-1Triple Compartment Topmount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Triple compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Complete with waste fittings, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



LBT6410PCB-1

Technical daTa

Type of basin Triple Compartment Gross weight 16.3 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTions

LBT6410PCB-1/1, 1 hole, 1 1/2" diameter LBT6410PCB-1/3, 3 hole, 8" centerset, 1 1/2" diameter LBT6410PCB-1, Custom (non-returnable)

LBT6410PCB-1Triple Compartment Topmount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Triple compartment self rimming drop-in sink with faucet ledge. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Complete with waste fittings, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



LBT8610P-1

Technical daTa

Type of basin Triple Compartment Gross weight 15.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTions

LBT8610P-1/1, 1 hole, 1 1/2" diameter LBT8610P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBT8610P-1, Custom (non-returnable)

LBT8610P-1Triple Compartment Topmount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment self rimming drop-in sink with two adjoining faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Overall front to back: 18 13/16" (478 mm) Overall left to right: 20 13/16" (529 mm)Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 5" (127 mm)

ALBLS4605P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA

Type of basin Classroom Gross weight 5.2 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

ALBLS4605P-1/2, 1 hole, bubbler on left ledge ALBLS4605P-1/4, 3 hole, 8" centerset, bubbler on left ledge

ALBLS4605P-1Classroom Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBLS4606P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA

Type of basin Classroom Gross weight 6 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBLS4608P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA

Type of basin Classroom Gross weight 6.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

LBLS4608P-1/2, 1 hole, bubbler on left ledge LBLS4608P-1/4, 3 hole, 8" centerset, bubbler on left ledge

LBLS4608P-1Classroom Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBLS6406P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA

Type of basin Classroom Gross weight 6 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS


ø1 1/2" (38mm)




ø1 1/2"(38mm)

8" (204mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBLS6408P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA

Type of basin Classroom Gross weight 6.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS


ø1 1/2" (38mm)




ø1 1/2"(38mm)

8" (204mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBLS7005P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA

Type of basin Classroom Gross weight 6.6 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS


ø1 1/2" (38mm)




ø1 1/2"(38mm)

8" (204mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBLS7006P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS


ø1 1/2" (38mm)




ø1 1/2"(38mm)

8" (204mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBLS7008P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS


ø1 1/2" (38mm)




ø1 1/2"(38mm)

8" (204mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBRS4605P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

ALBRS4605P-1/2, 1 hole, bubbler on right ledge ALBRS4605P-1/4, 3 hole, 8" centerset, bubbler on right ledge

ALBRS4605P-1Classroom Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBRS4606P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBRS4608P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA

Type of basin Classroom Gross weight 6 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

LBRS4608P-1/2, 1 hole, bubbler on right ledge LBRS4608P-1/4, 3 hole, 8" centerset, bubbler on right ledge

LBRS4608P-1Classroom Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBRS7005P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

ALBRS7005P-1/2, 1 hole, bubbler on right ledge ALBRS7005P-1/4, 3 hole, 8" centerset, bubbler on right ledge ALBRS7005P-1, Custom (non-returnable)

BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)


bubbler hole on right ledge1 hole


ø1 1/2"(38mm)

8" (204mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBRS7006P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS


BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)




ø1 1/2"(38mm)

8" (204mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBRS7008P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS


BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)




ø1 1/2"(38mm)

8" (204mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

LBRS7008P-1Classroom Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment self rimming drop-in sink with triple ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



ALBLRS7005P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA

Type of basin Single Compartment Gross weight 7 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

ALBLRS7005P-1/3L, 2 single holes, bubbler hole left ledge ALBLRS7005P-1/3R, 2 single holes, bubbler hole right ledge ALBLRS7005P-1/5L, 3 hole, 8" centerset, 1 hole right, bubbler hole left ledge ALBLRS7005P-1/5R, 3 hole, 8" centerset, 1 hole left, bubbler hole right ledge

ALBLRS7005P-1Classroom Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBLRS7006P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

ALBLRS7006P-1/3L, 2 single holes, bubbler hole left ledge ALBLRS7006P-1/3R, 2 single holes, bubbler hole right ledge ALBLRS7006P-1/5L, 3 hole, 8" centerset, 1 hole right, bubbler hole left ledge ALBLRS7006P-1/5R, 3 hole, 8" centerset, 1 hole left, bubbler hole right ledge

ALBLRS7006P-1Classroom Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBLRS7008P-1Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA

Type of basin Classroom Gross weight 8 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

LBLRS7008P-1/3L, 2 single holes, bubbler hole left ledge LBLRS7008P-1/3R, 2 single holes, bubbler hole right ledge LBLRS7008P-1/5L, 3 hole, 8" centerset, 1 hole right, bubbler hole left ledge LBLRS7008P-1/5R, 3 hole, 8" centerset, 1 hole left, bubbler hole right ledge

LBLRS7008P-1Classroom Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.Overall front to back: 16 1/8" (410 mm) Overall left to right: 23 1/2" (597 mm)Bowl front to back: 14" (356 mm) Bowl left to right: 16" (406 mm) Bowl depth: 5" (127 mm)

ALHS4605P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

ALHS4605P-1/2L, 1 hole, bubbler hole left ledge ALHS4605P-1/2R, 1 hole, bubbler hole left ledge ALHS4605P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge ALHS4605P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge ALHS4605P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge ALHS4605P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge

Diagonal Punching Diagonal Punching

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

/2L /4L1 hole



/2R /4R1 hole



ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

8"(204mm)

/2DR /2DL

1 hole 1 holebubbler hole on right ledge bubbler hole on left ledge

ø1 1/8" (29mm)

ø1 1/8" (29mm)

8"(204mm)

BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)

ALHS4605P-1Classroom Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes


ALHS4606P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS



ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

/2L /4L1 hole



/2R /4R1 hole



ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

8"(204mm)

/2DR /2DL


ø1 1/8" (29mm)

ø1 1/8" (29mm)

8"(204mm)

BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment self rimming drop-in sink with two opposing faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



LHS4608P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS



ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

/2L /4L1 hole



/2R /4R1 hole



ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

8"(204mm)

/2DR /2DL


ø1 1/8" (29mm)

ø1 1/8" (29mm)

8"(204mm)

BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)

LHS4608P-1Classroom Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes


Overall front to back: 18 1/8" (460 mm) Overall left to right: 21 1/2" (546 mm)Bowl front to back: 16" (406 mm) Bowl left to right: 14" (356 mm) Bowl depth: 5" (127 mm)

ALHS6405P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes


ALHS6406P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LHS6408P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

LHS6408P-1/2L, 1 hole, bubbler hole left ledge LHS6408P-1/2R, 1 hole, bubbler hole left ledge LHS6408P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge LHS6408P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge LHS6408P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge LHS6408P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes


ALHS7305P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA

Type of basin Classroom Gross weight 7 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes


ALHS7306P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LHS7308P-1center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes


ALHS8605P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS



ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

/2L /4L1 hole



/2R /4R1 hole



ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

8"(204mm)

/2DR /2DL


ø1 1/8" (29mm)

ø1 1/8" (29mm)

8"(204mm)

BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALHS8606P-1Wheelchair accessible (Canada only), center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA

Type of basin Classroom Gross weight 6 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS



ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

/2L /4L1 hole



/2R /4R1 hole



ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

8"(204mm)

/2DR /2DL


ø1 1/8" (29mm)

ø1 1/8" (29mm)

8"(204mm)

BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LHS8608P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

LHS8608P-1/2L, 1 hole, bubbler hole left ledge LHS8608P-1/2R, 1 hole, bubbler hole left ledge LHS8608P-1/2DL, Diagonal punching, 1 hole, bubbler hole left ledge LHS8608P-1/2DR, Diagonal punching, 1 hole, bubbler hole left ledge LHS8608P-1/4L, 3 hole, 8" centerset, bubbler hole left ledge LHS8608P-1/4R, 3 hole, 8" centerset, 1 hole, bubbler hole left ledge


ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

ø1 1/2" (38mm)

/2L /4L1 hole



/2R /4R1 hole



ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

8"(204mm)

/2DR /2DL


ø1 1/8" (29mm)

ø1 1/8" (29mm)

8"(204mm)

BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALRS4605P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

ALRS4605P-1/1, 1 hole ALRS4605P-1/2, 2 hole, 4" centerset ALRS4605P-1/3, 3 hole, 8" centerset

ALRS4605P-1Classroom Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALRS4606P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

ALRS4606P-1/1, 1 hole ALRS4606P-1/2, 2 hole, 4" centerset ALRS4606P-1/3, 3 hole, 8" centerset

ALRS4606P-1Classroom Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LRS4608P-1center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

LRS4608P-1/1, 1 hole LRS4608P-1/2, 2 hole, 4" centerset LRS4608P-1/3, 3 hole, 8" centerset

LRS4608P-1Classroom Sinks



Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

center waste location, includes 3 1/2” (89mm) crumb cup strainer with 1 1/2” (DN38) brass tailpieceTechnicAl dATA

Type of basin Single Compartment Gross weight 16.4 kg (ART36-1) 17.7 kg (ART48-1) 19.1 kg (ART60-1)Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Art Room - 18 gaugeClassroom Sinks

ProjecT informATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

overAll dimenSionS Sink comPArTmenT dimenSionS

model A (fronT-BAck)

B (lefT-righT)

c (fronT-BAck)

d (lefT-righT)

e (dePTh)

WASTe locATion

ART36-1 19 1/8" (486 mm) 38 1/8" (969 mm) 17" (432 mm) 36" (914 mm) 8" (203 mm) C

ART48-1 19 1/8" (486 mm) 50 1/8" (1273 mm) 17" (432 mm) 48" (1219 mm) 8" (203 mm) C

ART60-1 19 1/8" (486 mm) 62 1/8" (1578 mm) 17" (432 mm) 60" (1524 mm) 8" (203 mm) C



Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

center waste location, includes 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2” (DN38) brass tailpiece

TechnicAl dATA

Type of basin Single Compartment Gross weight 16.4 kg (ART36-3C)Gross weight 17.7 kg (ART48-3C)Gross weight 19.1 kg (ART60-3C)Type of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Art room - 18 gaugeClassroom Sinks

ProjecT informATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



B (lefT-righT)

c (fronT-BAck)

d (lefT-righT)

e (dePTh)

WASTe locATion

ART36-3C 19 1/8" (486 mm) 38 1/8" (968 mm) 17" (432 mm) 36" (914 mm) 8" (203 mm) C



165-A61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


WASHINO Children's Wash-and-Play Trough made of MIRANIT resin-bond-ed mineral material, with a smooth, pore-free surface (temperature- resistant up to 80°C). Alpine white colour. Wave-shaped basins with reduced extension to increase accessibility to the faucet, large outer radii of basins to minimise risk of injury, large inner radii facilitate easy cleaning. Faucet deck with a faucet hole 1 3/8" (35 mm) for each wash place. Waste and overflow valve DN 40 x 120 mm (4 3/4") implemented as a standpipe. Integral back panel for fixing. Mounting material included. Overall dimensions: 43 5/16 x 9 7/16 x 17 11/16" Left to right x height x front to back 1100 x 240 x 450 mm (WxHxD) 2 wash places, 7 7/8" (200 mm) bowl depth

SANW200TechnicAl dATA

Material mineral materialGross weight 70.25 kg/154.87 lbs.Type of waste kit 1 1/2" duplex waste with standpipe Faucet ledge yes Number of faucet holes 2Number of wash places 2Waste hole position centerWaste kit included yesWaste size DN 40 (1 1/2"/38 mm)Certificates and approvals pre-consumer recycled 31%, post-


SANW200Classroom Sinks

ProjecT informATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

165-B61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


WASHINO Children's Wash-and-Play Trough made of MIRANIT resin-bond-ed mineral material, with a smooth, pore-free surface (temperature- resistant up to 80°C). Alpine white colour. Wave-shaped basins with reduced extension to increase accessibility to the faucet, large outer radii of basins to minimise risk of injury, large inner radii facilitate easy cleaning. Faucet deck with 2 faucet holes, 1 3/8" (35 mm) for each wash place.

Waste and overflow valve DN 40 x 120 mm implemented as a standpipe. Integral back panel for fixing. Mounting material included. Overall dimensions: 82 11/16 x 9 7/16 x 18 1/2" Left to right x height x front to back 2100 x 240 x 470 mm (WxHxD) 4 wash places, 7 7/8" (200 mm) bowl depth


Material mineral materialGross weight 118 kg/260.14 lbs.Net weight 104 kg/229.28Type of waste kit 1 1/2" duplex waste with standpipe Faucet ledge yes Number of faucet holes 4Number of wash places 4Waste hole position centerWaste kit included yesWaste size DN 40 (1 1/2"/38 mm)Certificates and approvals pre-consumer recycled 31%, post-



ProjecT informATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

165-C61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


WASHINO Children's Wash-and-Play Trough made of MIRANIT resin- bonded mineral material, with a smooth, pore-free surface (temperature- resistant up to 80°C). Alpine white colour. With 4 wash places (2 wash places with a height difference of 100 mm), wave-shaped basins with reduced extension to increase accessibility to the faucet, large outer radii of basins to minimize risk of injury, large inner radii facilitate easy cleaning. Faucet deck with 4 faucet holes, 1 3/8" (35 mm). Integrated divider with overflow function made of MIRANIT, blue colour (RAL 5002).

Waste and overflow valve DN 40 x 120 mm implemented as a standpipe for 2 of the 4 washing stations. Integral back panel for fixing. Mounting instructions included. Overall dimensions: 82 11/16 x 13 3/8 x 18 1/2" Left to right x height x front to back 2100 x 340 x 470 mm (WxHxD) Version with basin left above/right below. Bowl depth 7 7/8" (200 mm)


Material mineral materialGross weight 145kg/319.67 lbs.Net weight 90.50kg/199.5 lbs.Type of waste kit 1 1/2" duplex waste with standpipe Faucet ledge yes Number of faucet holes 4Number of wash places 4Waste hole position centerWaste kit included yesWaste size DN 40 (1 1/2"/38 mm)Certificates and approvals pre-consumer recycled 31%, post-



ProjecT informATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

165-D61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


WASHINO Children's Wash-and-Play Trough made of MIRANIT resin-bond-ed mineral material, with a smooth, pore-free surface (temperature- resistant up to 80°C). Alpine white colour. With 4 wash places (2 wash places with a height difference of 100 mm), wave-shaped basins with reduced extension to increase accessibility to the faucet, large outer radii of basins to minimise risk of injury, large inner radii facilitate easy cleaning. Faucet deck with 4 faucet holes, 1 3/8" (35 mm). Integrated divider with overflow function made of MIRANIT, blue colour (RAL 5002).Waste and overflow valve DN 40 x 120 mm implemented as a standpipe for 2 of the 4 wash places. Integral back panel for fixing. Mounting material included. Overall dimensions: 82 11/16" x 13 3/8 x 18 1/2" Left to right x height x front to back 2100 x 340 x 470 mm (WxHxD) Version with basin right above/left below. Bowl depth 7 7/8" (200 mm). (No photo currently available. Actual model would be the reverse of the photo shown.)


Material mineral materialGross weight 95kg/209.44 lbs.Net weight 90.50kg/199.5 lbs.Type of waste kit 1 1/2" duplex waste with standpipe Faucet ledge yes Number of faucet holes 4Number of wash places 4Waste hole position centerWaste kit included yesWaste size DN 40 (1 1/2"/38 mm)Certificates and approvals pre-consumer recycled 31%, post-



ProjecT informATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Photo not available. Model shown is SANW211.

165-E61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


WASHINO Children's Wash-and-Play Trough made of MIRANIT resin-bond-ed mineral material, with a smooth, pore-free surface (temperature- resistant up to 80°C). Alpine white colour. Wave-shaped basins with reduced extension to increase accessibility to the faucet, large outer radii of basins to minimise risk of injury, large inner radii facilitate easy cleaning. Faucet deck with 3 faucet holes, 1 3/8" (35 mm). Waste and overflow valve DN 40 x 120 mm implemented as a standpipe. Integral back panel for fixing. Mounting material included. Overall dimensions: 63 x 9 7/16 x 17 11/16" Left to right x height x front to back 1600 x 240 x 450 mm (WxHxD) 3 wash places. Bowl depth 7 7/8" (200 mm).


Material mineral materialGross weight 95kg/209.44 lbs.Net weight 90.50kg/199.5 lbs.Type of waste kit 1 1/2" duplex waste with standpipe Faucet ledge yes Number of faucet holes 3Number of wash places 3Waste hole position centerWaste kit included yesWaste size DN 40 (1 1/2"/38 mm)Certificates and approvals cUPC approval


ProjecT informATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

165-F61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Multiple bowls with ledges - 18 gaugeClassroom Sinks

Topmount Sink

Double compartment self rimming combination drop-in sink with faucet ledges. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and Universal Installation System hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

WASTe Size (Indicated in model number, eg. LBLDC1737P-1)-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

For a 3 1/2" (89 mm) vandal-resistant grid strainer, order separately using part number 1300G.

WASTe locATionC = center CB= center back

fAUceT hole oPTionS (STAndArd)When ordering a model number, indicate which faucet hole option is required by adding the # of holes required to the end of the model number; (eg. LBDC1737P-1/2)See standard options by model.

configUrATionSLBLDC1737P-1 Small bowl left, LBRDC1737P-1 Small bowl right LBLDC1943P-1 Small bowl left, LBRDC1943P-1 Small bowl right

cUSTom fAUceT holeSCustom faucet hole drillings are available on all models. Order model as indicated in chart below, specifying all necessary hole drilling information. Sinks with custom drillings are non-returnable.

ø1 1/2"(38mm)

4" (102mm)

/11 hole

ø1 1/2" (38mm)


ø1 1/2"(38mm)

8" (204mm)


ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

CLASSROOM - LBRDC SERIES

ø1 1/2"(38mm)

4" (102mm)

/11 hole

ø1 1/2" (38mm)


ø1 1/2"(38mm)

8" (204mm)


ø1 1/8" (29mm)

ø1 1/8" (29mm)

ø1 1/8" (29mm)

5 [127 mm] 6 [152 mm]

17 [432 mm]

12¾ [324 mm]

1313⁄16 [351 mm]

89⁄16 [217 mm]

8½ [216 mm]

19 [483 mm]

14½ [368 mm]

9½ [241 mm] 20 [508 mm]

43 [1092 mm]

STAndArd hole drilling configUrATion - cenTer BAck WASTe PoSiTion STAndArd hole drilling configUrATion - cenTer WASTe PoSiTion

LBLDC1943P-1 Shown



B (lefT-righT)

c (fronT-BAck)

d (lefT-righT)

e (dePTh)

WASTe locATion

fAUceT hole oPTionS

LBLDC1737P-1 17" (432 mm) 37" (940 mm) 12" (305 mm) 17" (432 mm) 8" (203 mm) C 1, 2, 3

LBRDC1737P-1 17" (432 mm) 37" (940 mm) 12" (305 mm) 17" (432 mm) 8" (203 mm) C 1, 2, 3

LBLDC1943P-1 19" (483 mm) 43" (1092 mm) 17" (432 mm) 20" (508 mm) 6" (152 mm) CB 1, 2, 3

LBRDC1943P-1 19" (483 mm) 43" (1092 mm) 17" (432 mm) 20" (508 mm) 6" (152 mm) CB 1, 2, 3

VIEW / DRAWING TyPE / MODEL

BUBBLER HOLE DETAIL

ø1 1/8" (29mm)

ø1 1/2" (38mm)



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Under-coated to reduce condensation and resonance. Includes waste fitting, cutout template, and installation hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Left rear waste location, 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.



UCS6805P-1

Technical daTa

Type of basin Single Compartment Gross weight 10 kgType of mounting undermount Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position rear left Overflow no Certificates and approvals pre-consumer recycled 31%, post-


UCS6805P-1Undermount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Under-coated to reduce condensation and resonance. Includes waste fitting, cutout template, and installation hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center back waste location, 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.



UCS6808P-1

Technical daTa

Type of basin Single Compartment Gross weight 11 kgType of mounting undermount Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Under-coated to reduce condensation and resonance. Includes waste fittings, cutout template, and installation hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.



UCD6405P-1

Technical daTa

Type of basin Double Compartment Gross weight 16 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


UCD6405P-1Undermount Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Under-coated to reduce condensation and resonance. Includes waste fittings, cutout template, and Universal Installation System hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.



UCD6408P-1

Technical daTa




Double compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Under-coated to reduce condensation and resonance. Includes waste fittings, cutout template, and Universal Installation System hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.



UCD6408P-1

Technical daTa




61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

169-A

Single compartment undermount sink. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Under-coated to reduce condensation and resonance. Includes waste fitting, cutout template, and installation hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center back waste location, 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece.



UCS6105P-1

Technical daTa

Type of basin Single Compartment Gross weight 4.69 kg / 10.3 lbs.Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment self rimming drop-in sink with faucet ledge and drain board. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Waste fittings included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.



LBSDBR6408P-1Drain board is located to the right of sink bowl and is sloped for drainage, center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

LBSDBR6408P-1/1, 1 hole, 1 1/2" diameter LBSDBR6408P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBSDBR6408P-1, Custom (non-returnable)

LBSDBR6408P-1Drainboard Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBSDBL6408P-1Drain board is located to the left of sink bowl and is sloped for drainage, center back waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

LBSDBL6408P-1/1, 1 hole, 1 1/2" diameter LBSDBL6408P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBSDBL6408P-1, Custom (non-returnable)

LBSDBL6408P-1Drainboard Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBSDBR6810P-1Drain board is located to the right of sink bowl and is sloped for drainage, center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

LBSDBR6810P-1/1, 1 hole, 1 1/2" diameter LBSDBR6810P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBSDBR6810P-1, Custom (non-returnable)

LBSDBR6810P-1Drainboard Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBSDBL6810P-1Drain board is located to the left of sink bowl and is sloped for drainage, center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

LBSDBL6810P-1/1, 1 hole, 1 1/2" diameter LBSDBL6810P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBSDBL6810P-1, Custom (non-returnable)

LBSDBL6810P-1Drainboard Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double compartment self rimming drop-in sink with faucet ledge and drain board. Drain board is located to the right of sink bowl and is sloped for drainage. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Waste fittings included. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



LBDDBR6408P-1Drain board is located to the right of sink bowls and is sloped for drainage, center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

LBDDBR6408P-1/1, 1 hole, 1 1/2" diameter LBDDBR6408P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBDDBR6408P-1, Custom (non-returnable)

LBDDBR6408P-1Drainboard Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double compartment self rimming drop-in sink with faucet ledge and drain board. Drain board is located to the right of sink bowl and is sloped for drainage. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Waste fittings included. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



LBDDBL6408P-1Drain board is located to the left of sink bowls and is sloped for drainage, center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

technIcAl dAtA



model oPtIonS

LBDDBL6408P-1/1, 1 hole, 1 1/2" diameter LBDDBL6408P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBDDBL6408P-1, Custom (non-returnable)

LBDDBL6408P-1Drainboard Sinks



Single compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Sink compartment sloped to drain with radius coved corners on front and back only. Rolled rim. Stainless steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08

WASte Size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece-5 = 1 1/2" (38mm) duplex waste assembly, rubber stopper, and 1 1/2" (DN38) brass tailpiece with standpipe and guard

WASte locAtionC = centerRR = right rear

FAUcet hole optionS (StAndArd)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.

Floor to rim:35" (890mm)

Drawing shown with a "-1" waste

Classic Series - 16 gaugeScullery Sinks

project inFormAtion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment

overAll dimenSionS Sink compArtment dimenSionS

model A (Front-BAck)

B (leFt-right)

c (Front-BAck)

d (leFt-right)

e (depth)

F BAckSplASh

WASte locAtion

FAUcet holeS

SL2424-1 27 3/16" (691 mm) 27 3/8" (695 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

SL2424-5 27 3/16" (691 mm) 27 3/8" (695 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) RR 2

SL2448-1 27 3/16" (691 mm) 51 3/8" (1305 mm) 24" (610 mm) 48" (1219 mm) 14" (356 mm) 9" (229 mm) C 2

SL2448-5 27 3/16" (691 mm) 51 3/8" (1305 mm) 24" (610 mm) 48" (1219 mm) 14" (356 mm) 9" (229 mm) RR 2



Double compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Sink compartments sloped to drain with radius coved corners on front and back only. Rolled Rim. Stainless steel tubular legs with adjustable feet. Includes waste fittings. Certified to ASME A112.19.3-2008 / CSA B45.4-08


WASte locAtionC = centerRR = right rearLR = left rear





Double Compartment



c (Front-BAck)

d (leFt-right)

e (depth)

F BAckSplASh

WASte locAtion

FAUcet holeS

DL2448-1 27 3/16" (691 mm) 51 3/8" (1305 mm) 24" (610 mm) 48" (1219 mm) 14" (356 mm) 9" (229 mm) C 2

DL2448-5 27 3/16" (691 mm) 51 3/8" (1305 mm) 24" (610 mm) 48" (1219 mm) 14" (356 mm) 9" (229 mm) RR, LR 2

project inFormAtion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



Triple compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Sink compartments sloped to drain with radius coved corners on front and back only. Rolled Rim. Stainless steel tubular legs with adjustable feet. Includes waste fittings. Certified to ASME A112.19.3-2008 / CSA B45.4-08


WASte locAtionC = centerRR = right rearLR = left rear





project inFormAtion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Triple Compartment



B (leFt-right)

c (Front-BAck)

d (leFt-right)

e (depth)

F BAckSplASh

WASte locAtion

FAUcet holeS

TL2454-1 27 3/16" (691 mm) 57 3/8" (1457 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

TL2454-5 27 3/16" (691 mm) 57 3/8" (1457 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) RR, RR, LR 2

TL2472-1 27 3/16" (691 mm) 75 3/8" (1915 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

TL2472-5 27 3/16" (691 mm) 75 3/8" (1915 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) RR, RR, LR 2



project inFormAtion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Removable drain board for Classic Series scullery sinks. Made from 16 gauge (1.5mm) type 304 stainless steel. Polished to a satin finish. The legs have adjustable feet and are interchangeable such that the product can be installed on either the left or right of the scullery.

Overall front to back: 23" (584 mm) Overall left to right: 24" (610 mm) Overall height: 36" (914 mm)

CL-DBMounting left or right

technicAl dAtA

Gross weight 11 kgDrainer or storage drainer Back splash height 1" (25 mm)Certificates and approvals pre-consumer recycled 31%, post-

consumer-recycled 56%, LEED MR credit 4: recycled content (1-2 points)

CL-DBScullery Sinks

www.franke-commercial.com REV-20361562 | SPECIFICATIONS | REV. 2016 - PAGE # CHANGE ONLY


Single compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartment is square corner construction. Rolled rim. Sink compartment sloped to drain. Stainless Steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.

Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

Waste locationC = center

Faucet hole options (standard)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.

Floor to Work surFace35" (890 mm)

S series - 14 gaugeScullery Sinks

project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single Compartment - without drainboard

overall dimensions sink compartment dimensions

model a (Front-Back)

B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

SSL2418-1 28 1/2" (724 mm) 22 1/4" (565 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

SSL2424-1 28 1/2" (724 mm) 28 1/4" (718 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

www.franke-commercial.com REV-20461562 | SPECIFICATIONS | REV. NOV_2015


Single compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartment is square corner construction. Rolled rim. Drainboard and sink compartment sloped to drain. Stainless Steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.






project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single Compartment - drainboard left or right



B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

SSL2418L-1 28 1/2" (724 mm) 44 1/8" (1121 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

SSL2418R-1 28 1/2" (724 mm) 44 1/8" (1121 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

SSL2424L-1 28 1/2" (724 mm) 50 1/8" (1273 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

SSL2424R-1 28 1/2" (724 mm) 50 1/8" (1273 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) RR 2

Drawing shown with Right Drainboard option (R-1)



Single compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartment is square corner construction. Rolled rim. Drainboard and sink compartment sloped to drain. Stainless Steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.






project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single Compartment - drainboard left and right



B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

SSL2418LR-1 28 1/2" (724 mm) 66" (1676 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

SSL2424LR-1 28 1/2" (724 mm) 72" (1829 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



Double compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartments are square corner construction. Rolled rim. Sink compartments sloped to drain. Stainless Steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.






project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double Compartment - without drainboard



B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

SDL2436-1 28 1/2" (724 mm) 40 1/4" (1022 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

SDL2448-1 28 1/2" (724 mm) 52 1/4" (1327 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



Double compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartments are square corner construction. Rolled rim. Drainboard and sink compart-ments sloped to drain. Stainless Steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.





Drawing shown with Left Drainboard option (L-1)


project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double Compartment - drainboard left or right



B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

SDL2436L-1 28 1/2" (724 mm) 62 1/8" (1578 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

SDL2436R-1 28 1/2" (724 mm) 62 1/8" (1578 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

SDL2448L-1 28 1/2" (724 mm) 74 1/8" (1883 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

SDL2448R-1 28 1/2" (724 mm) 74 1/8" (1883 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



Double compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartments are square corner construction. Rolled rim. Drainboard and sink compart-ments sloped to drain. Stainless Steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.






project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double Compartment - drainboard left and right



B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

SDL2436LR-1 28 1/2" (724 mm) 84" (2133 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

SDL2448LR-1 28 1/2" (724 mm) 96" (2438 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



Triple compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Compartments are sloped to drain and are square corner construction. Rolled rim. Stainless steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.



Faucet hole options (standard)2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset, punched 4" (102mm) below top of backsplash.



project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Triple Compartment - without drainboard



B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

STL2454-1 28 1/2" (724 mm) 58 1/4" (1480 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

STL2472-1 28 1/2" (724 mm) 76 1/4" (1937 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2










project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Triple Compartment - drainboard left or right



B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

STL2454L-1 28 1/2" (724 mm) 80 1/8" (2035 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

STL2454R-1 28 1/2" (724 mm) 80 1/8" (2035 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

STL2472L-1 28 1/2" (724 mm) 98 1/8" (2492 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

STL2472R-1 28 1/2" (724 mm) 98 1/8" (2492 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2









project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Triple Compartment - drainboard left and right



B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

STL2454LR-1 28 1/2" (724 mm) 102" (2590 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

STL2472LR-1 28 1/2" (724 mm) 120" (3048 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



Single compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Sink bowl sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.





R series - 16 gaugeScullery Sinks

project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

RSL2418-1 28 1/2" (724 mm) 22 1/4" (565 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

RSL2424-1 28 1/2" (724 mm) 28 1/4" (718 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



Single compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartment sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.





Drawing shown Right Drainboard option (R-1)


project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

RSL2418L-1 28 1/2" (724 mm) 44 1/8" (1121 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

RSL2418R-1 28 1/2" (724 mm) 44 1/8" (1121 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

RSL2424L-1 28 1/2" (724 mm) 50 1/8" (1273 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

RSL2424R-1 28 1/2" (724 mm) 50 1/8" (1273 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



Single compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.






project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

RSL2418LR-1 28 1/2" (724 mm) 66" (1676 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

RSL2424LR-1 28 1/2" (724 mm) 72" (1829 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



Double compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Sink bowls sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.






project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

RDL2436-1 28 1/2" (724 mm) 42 1/4" (1073 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

RDL2448-1 28 1/2" (724 mm) 54 1/4" (1378 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



Double compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.







project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

RDL2436L-1 28 1/2" (724 mm) 61 1/8" (1629 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

RDL2436R-1 28 1/2" (724 mm) 61 1/8" (1629 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

RDL2448L-1 28 1/2" (724 mm) 76 1/8" (1934 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

RDL2448R-1 28 1/2" (724 mm) 76 1/8" (1934 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



Double compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.






project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

RDL2436LR-1 28 1/2" (724 mm) 86" (2184 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

RDL2448LR-1 28 1/2" (724 mm) 98 " (2489 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



Triple compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Sink bowls sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.






project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

RTL2454-1 28 1/2" (724 mm) 62 1/4" (1581 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

RTL2472-1 28 1/2" (724 mm) 80 1/4" (2038 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

RTL2454L-1 28 1/2" (724 mm) 84 1/8" (2137 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

RTL2454R-1 28 1/2" (724 mm) 84 1/8" (2137 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

RTL2472L-1 28 1/2" (724 mm) 102 1/8" (2594 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

RTL2472R-1 28 1/2" (724 mm) 102 1/8" (2594 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

Triple compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.









Triple compartment scullery sink. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.






project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

RTL2454LR-1 28 1/2" (724 mm) 106" (2692 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

RTL2472LR-1 28 1/2" (724 mm) 124" (3150 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



Single compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Sink bowl sloped to drain. Stainless steel tubular legs with adjustable feet. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.

Waste size-1 = 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece -5 = 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece, with standpipe and guard

Waste locationC = centerRR = right rear



W series - 14 gaugeScullery Sinks

project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

WSL2418-1 28 1/2" (724 mm) 22 1/4" (565 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

WSL2424-1 28 1/2" (724 mm) 28 1/4" (718 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

WSL2418L-1 28 1/2" (724 mm) 44 1/8" (1121mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

WSL2418R-1 28 1/2" (724 mm) 44 1/8" (1121mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

WSL2424L-1 28 1/2" (724 mm) 50 1/8" (1273 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

WSL2424R-1 28 1/2" (724 mm) 50 1/8" (1273 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

Single compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.





Drawing shown with drainboard left option (L-1)




project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

WSL2418LR-1 28 1/2" (724 mm) 66" (1676 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

WSL2424LR-1 28 1/2" (724 mm) 72" (1829 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

Single compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. This series of scullery sinks are built to order and are non-returnable.








Double compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Sink bowl sloped to drain. Stainless steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.


Waste locationC = centerRR = right rearLR = left rear




project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

WDL2436-1 28 1/2" (724 mm) 42 1/4" (1073 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

WDL2448-1 28 1/2" (724 mm) 54 1/4" (1378 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



Double compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.







project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

WDL2436L-1 28 1/2" (724 mm) 61 1/8" (1629 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

WDL2436R-1 28 1/2" (724 mm) 61 1/8" (1629 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

WDL2448L-1 28 1/2" (724 mm) 76 1/8" (1934 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

WDL2448R-1 28 1/2" (724 mm) 76 1/8" (1934 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



Double compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Includes waste fitting. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.






project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

WDL2436LR-1 28 1/2" (724 mm) 86" (2184 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

WDL2448LR-1 28 1/2" (724 mm) 98 " (2489 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

www.franke-commercial.com 226-A61562 | SPECIFICATIONS | REV. NOV_2015


Triple compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Sink bowl sloped to drain. Stainless steel tubular legs with adjustable feet. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.






project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

WTL2454-1 28 1/2" (724 mm) 62 1/4" (1581 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

WTL2472-1 28 1/2" (724 mm) 80 1/4" (2038 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

www.franke-commercial.com 226-B61562 | SPECIFICATIONS | REV. NOV_2015


Triple compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.





Drawing shown with right drainboard option (R-1)


project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

WTL2454L-1 28 1/2" (724 mm) 84 1/8" (2137 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

WTL2454R-1 28 1/2" (724 mm) 84 1/8" (2137 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

WTL2472L-1 28 1/2" (724 mm) 102 1/8" (2594 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

WTL2472R-1 28 1/2" (724 mm) 102 1/8" (2594 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

www.franke-commercial.com 226-C61562 | SPECIFICATIONS | REV. NOV_2015


Triple compartment scullery sink. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. Radius coved corner construction. Rolled rim. Drainboard and sink compartments sloped to drain. Stainless steel tubular legs with adjustable feet. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.






project inFormation

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




B (leFt-right)

c (Front-Back)

d (leFt-right)

e (depth)

F Backsplash

Waste location

Faucet holes

WTL2454LR-1 28 1/2" (724 mm) 106" (2692 mm) 24" (610 mm) 18" (457 mm) 14" (356 mm) 9" (229 mm) C 2

WTL2472LR-1 28 1/2" (724 mm) 124" (3150 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2



227

Hospital & Laboratory

61562 | SPECIFICATIONS | 2014

TEST REPORT Ph: 909.472.4100 • Fax 909.472.4243 • Web: www.iapmo.org

5001 East Philadelphia Street • Ontario, California 91761-2816 - USA

Page 1 of 5 This report may not be copied, except in its entirety, without the written permission of IAPMO R&T Lab

Report Number: 934-13036-003

Report Issued: May 7, 2013

Client: Franke Kindred Industries Lab Project No. 20516-002 1000 Kindred Road

Midland, ON, Canada L4R 4K9 Contact: Mr. Cory Macey

Source of Samples: Franke Kindred Industries

Dates of Evaluation: June 18 to June 19, 2012 for Models HWS1414P-00, HWS1420P-00 and HWS1518P-00 April 29, 2013 for Models HWSS1518P-Z8000 and HWSS1518P-Z8000W

Samples Description: Wall-Hung Stainless Steel Hand Hygiene Sinks

Model Description

HWS1414P-00 18.67” X 15” X 18.5”, for a splash or deck mounted faucet, integral drain tailpiece, integral side splash guards.

HWS1420P-00 19.9” X 21” X 37”, for a splash or deck mounted faucet, integral drain tailpiece, integral side and back splash guards.

HWS1518P-00 18” X 15.1’ X 18.5”, for a splash mounted faucet, integral drain tailpiece, integral side splash guards.

HWSS1518P-Z8000 18” X 15.1 X 28-5/8”, with Delta 24T3001 laminar flow electronic faucet with mixing handle.

HWSS1518P-Z8000W 18” X 15.1 X 28-5/8”, coated with white Saniguard, with Delta 24T3001 laminar flow electronic faucet with mixing handle

Scope of Testing: The purpose of testing was to determine whether the samples evaluated of the Stainless Steel Hand Hygiene Sinks met the applicable requirements of Item 19 “Hand Hygienic Sink” of Table 11.1 of CSA Z8000-11, entitled “Canadian Health Care Facilities”.

CONCLUSION: The samples evaluated of the Steel Hand Hygiene Sinks from Franke Kindred Industries models HWS1414P-00, HWS1420P-00, HWS1518P-00, HWSS1518P-Z8000 and HWSS1518P-Z8000WCOMPLIED with the applicable requirements of Item 19 of Table 11.1 of CSA Z8000-11.

Evaluated and Reviewed By,

Ken Wijaya, Sr. Laboratory Director



228



Report No. 934-13036-003 Page 2 of 5

Primary Standard: CSA Z8000-11 Section Evaluated:

Table 11.1, Item 19 Hand Hygienic Sink

Test Results: All evaluations were conducted per the written specification in the specified standard.

CSA Z8000-11

Table 11.1, Item 19 Hand Hygienic Sink

Mandatory:

Hand hygiene sinks shall be constructed and installed as follows:

(a) Materials: COMPLIED (i) Materials shall be non-porous, e.g., porcelain, enamel, vitreous china, or 18 gauge (or thicker) stainless steel. (ii) Granite or marble shall not be used.

Findings: Sinks, models HWS1414P-00, HWS1420P-00, HWS1518P-00 and HWSS1518P-Z8000, were made of 18 gauge 304 stainless steel. Sink, model HWSS1518P-Z8000W, was made of 18 gauge 304 stainless steel coated with non-porous baked enamel (powder coating covered by Saniguard coating).

(b) Size: COMPLIED (i) Hand hygiene sink size shall be sufficient to prevent recontamination (from splashing) during use. Minimum inside dimension should be 350 × 250 mm and a minimum depth of 225 mm. (ii) Cup or bar sinks shall not be used for hand hygiene.

Findings: The size of each sink was more than 350 × 250 mm and a minimum depth of 225 mm.

The bowl inside dimensions were: 356 X 356 mm and depth of 254 mm for model HWS1414P-00 356 X 508 mm and depth of 254 mm for model HWS1420P-00 356 X 356 mm and depth of 254 mm for model HWS1518P-00 356 X 356 mm and depth of 254 mm for model HWSS1518P-Z8000 356 X 356 mm and depth of 254 mm for model HWSS1518P-Z8000W

The sinks were not cup or bar sinks.

(c) Construction: COMPLIED* (i) Hand hygiene sinks shall be shaped to prevent splashing and with a collar directing runoff into the sink basin. (ii) Sink shall not be capable of taking a sink plug. (iii) Sink and spout shall be designed such that splashing and aerosolization is minimized. The spout shall not direct water directly into drain but should hit the basin surface in front of the drain. (iv) Spouts shall be free of aerators\modulators\rose sprays and shall not swivel. (v) Strainers and anti-splash fittings at outlets shall not be used. (vi) The outside rim shall be of minimal width and have the surface angled down towards the inside to prevent pooling of water and placement of objects on the rim.



229



Report No. 934-13036-003 Page 3 of 5

(vii) Traps shall be metal. Gaskets at the skin/drain connection shall be plastic or neoprene. Rubber gaskets shall not be used. (viii)Trap size shall be 40 mm diameter. (ix) Overflows shall not be used. (x) Adequate flow rate shall be provided to ensure the removal of soap residue.

Findings: The hand hygiene sinks tested were shaped to prevent splashing. The sinks had integral drain tailpiece, designed for not taking a sink plug. Sinks were designed such that splashing is minimized. The installation instructions was provided with a statement “The faucet spout must not be installed to spray directly into the drain fitting.” Models HWS1414P-00, HWS1420P-00 and HWS1518P-00: The spout/faucet to be supplied by others*. Models HWSS1518P-Z8000 and HWSS1518P-Z8000W: Delta Faucet model Delta 24T3001 was supplied. The spout did not direct water directly into drain. The flow hit the basin surface. Spout was free of aerators\modulators\rose sprays and did not swivel. The outside rim was of minimal width and was designed to prevent pooling of water and placement of objects on the rim. The metal trap to be supplied by others*. No overflows was be used. *Note: Compliant with aerosolization, no strainers usage, anti-splash fittings at outlets, usage of trap and adequate faucet flow rate are depended on the actual field installation.

(d) Location: COMPLIED** (i) Sinks shall be wall-mounted and at least 1 m away from any fixed work surface or separated by a splash barrier. Sinks shall not be inserted into or immediately adjacent to a counter. (ii) Hand hygiene sinks shall be installed at least 865 mm above the floor and shall not have storage underneath (due to proximity to sanitary sewer connections and risk of leaks or water damage).

Findings: The hand hygiene sinks tested were wall-hung units with integral side splash guards. **Note: Compliant with installation at least 865 mm above the floor and shall not have storage underneath are depended on the actual field installation.

(e) Controls: COMPLIED*** (i) Taps and controllers shall be hands free. Electric eye, foot pedal, or faucet blade controls may be used. Electric eye operation shall be triggered by hand, not body, placement. A means shall be provided to control the temperature. (ii) Automatic temperature control shall not be used. (iii) Electric eye technology shall have a backup that allows for operation during power interruptions and shall have a means for users to adjust water temperature adjacent to the sink.

Findings: Models HWS1414P-00, HWS1420P-00, HWS1518P-00: Tap and controller are to be supplied by others***. ***Note: Compliant to these requirements is depended on the actual field installation. Models HWSS1518P-Z8000 and HWSS1518P-Z8000W: Tap and control was a Delta Faucet sensor faucet, model 24T3001 with electric eye on-off valve and lever handle to control the temperature. The sensor faucet was equipped with a battery backup that allowed during power interruptions. The faucet had a means for users to adjust water temperature adjacent to the sink.



230



Report No. 934-13036-003 Page 4 of 5

(f) Backsplash: COMPLIED****

(i) Adjacent wall surfaces shall be protected from splashes with impermeable back/side splashes. Backsplashes shall be seam free. All edges shall be sealed with a waterproof barrier.

Backsplashes shall include the area under the paper towel dispenser and soap dispenser. (ii) Backsplashes shall extend a minimum 600 mm above sink level and a minimum of 250 mm below sink level.

Findings: For models HWS1414P-00, HWS1518P-00, HWSS1518P-Z8000 and HWSS1518P-Z8000W, backsplash to be provided by others****. ****Note: Compliant to these requirements is depended on the actual field installation.

For model HWS1420P-00, it had an integral back and side splash guards. The backsplash was seam free. All edges were sealed as the backsplash was an integral part of the sink. Backsplash included the area under the paper towel dispenser and soap dispenser. Backsplashes extended 686 mm above sink flood level and 254 mm below sink flood level.

(g) Soap and lotion dispensers: NOT APPLICABLE (i) Liquid soap and lotion dispensers shall have hands free operation and mounted to permit unobstructed access and minimize splashing or dripping onto adjacent wall and floor surfaces. (ii) Liquid dispensers (soap or lotion) shall use non-refillable bottles and shall be placed to prevent splash-up contamination.

Findings: Soap and lotion dispensers are to be provided by others. Note: Compliant to these requirements is depended on the actual field installation.

Hand drying: NOT APPLICABLE(a) Single-use paper towels shall be provided. Cloth drying towels shall not be used. (b) Towel dispensers shall be mounted to permit unobstructed access and minimize splashing or dripping onto adjacent wall and floor surfaces. (c) Towel dispenser design shall be such that towels are dispensed singly. They shall either be hands-free or designed so that only the towel is touched during removal of towel for use. (d) Hot-air dryers shall not be used for hand hygiene sinks. (e) Paper waste receptacles shall be a corrosion free material and wide mouth design. (f) Space shall be allowed for the placement of waste bins in close proximity to the hand hygiene sink. (g) To avoid recontamination of the hands, paper towels should be available to use on the exit door hardware and a trash container for used towels should be located near the exit door. (h) Bins, with a waste bag, shall be provided in close proximity to each hand hygiene sink. If bins are lidded the bin shall be foot-pedal operated.

Findings: Paper towel dispenser to be provided by others. Note: Compliant to these requirements is depended on the actual field installation.

Accessible sinks: NOT APPLICABLE(a) Hand hygiene sinks shall be located at a level where they can used by people in wheelchairs and shall be available as per HCF requirements. These are in addition to hand hygiene sinks used by staff. (b) Hand hygiene sinks should be in accordance with ASME A112.19.2/CSA B45.1. Wheelchair accessible sinks should be wall mounted, made of vitreous china, 510 mm long by 685 mm wide, slab type provided with combination centre set faucets, gooseneck spout, open drain with perforated strainer, and 32 mm cast brass adjustable P-trap with tailpiece.

Findings: The sinks are not intended to be used as accessible sinks.



231



Report No. 934-13036-003 Page 5 of 5

HWS1414P-00 HWS1420P-00 HWS1518P-00

HWSS1518P-Z8000 HWSS1518P-Z8000W



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment premium surgical scrub station. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radi-us coved bowl corners. Access panel for service and maintenance. Integral 1 1/2"-16 (38mm) threaded tailpiece. Supplied with wall hanger brackets. Surface treated with SANIGUARD® product protection. Standard hole drilling is 1 1/8" (28mm) diameter 2 1/2" (64mm) below backsplash crease. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. Design Features: - Surgical scrub stations designed with sloped edges to minimize free-standing water - Special integral waste design to prevent use of a waste plug, with 1 1/2" threaded tailpiece for use with offset waste. - SANIGUARD® product protection is effective against most common bacteria, yeasts, molds and fungi that cause stains, odors and product deterioration. SANIGUARD® product protection is designed to protect the product itself and will not protect the user or others from food-borne illness or disease. Always follow proper hygienic and cleaning procedures when using this product.

Overall front to back: 19 3/4" (502 mm) Overall left to right: 16" (406 mm) Overall height: 28" (711 mm)

Bowl front to back: 13 1/2" (343 mm) Bowl left to right: 13" (330 mm) Bowl depth: 10" (254 mm)

SSU1-2016-0016" (406 mm) overall width with 13" (330 mm) wide sink compartment

technIcAl dAtA

Gross weight 32 kgType of waste kit threaded tailpiece Back splash yes Undercoated no Waste hole position centre Back splash height 5 1/8" (130 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


SSU1-2016-00Hospital and Laboratory Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment premium surgical scrub station. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radi-us coved bowl corners. Access panel for service and maintenance. Integral 1 1/2"-16 (38mm) threaded tailpiece. Supplied with wall hanger brackets. Surface treated with SANIGUARD® product protection. Standard hole drilling is 1 1/8" (28mm) diameter 2 1/2" (64mm) below backsplash crease. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. Design Features: - Surgical scrub stations designed with sloped edges to minimize free-standing water - Special integral waste design to prevent use of a waste plug, with 1 1/2" threaded tailpiece for use with offset waste. - SANIGUARD® product protection is effective against most common bacteria, yeasts, molds and fungi that cause stains, odors and product deterioration. SANIGUARD® product protection is designed to protect the product itself and will not protect the user or others from food-borne illness or disease. Always follow proper hygienic and cleaning procedures when using this product.



SSU1-2020-0020" (508 mm) overall width with 17" (431 mm) wide sink compartment

technIcAl dAtA



SSU1-2020-00Hospital and Laboratory Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double compartment premium surgical scrub station. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radi-us coved bowl corners. Access panel for service and maintenance. Inte-gral 1 1/2"-16 (38mm) threaded tailpiece. Supplied with wall hanger brackets. Surface treated with SANIGUARD® product protection. Standard hole drilling is 1 1/8" (28mm) diameter 2 1/2" (64mm) below backsplash crease. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. Design Features: - Surgical scrub stations designed with sloped edges to minimize free-standing water - Special integral waste design to prevent use of a waste plug, with 1 1/2"threaded tailpiece for use with offset waste.- SANIGUARD® product protection is effective against most commonbacteria, yeasts, molds and fungi that cause stains, odors and product deterioration. SANIGUARD® product protection is designed to protect the product itself and will not protect the user or others from food-borne illness or disease. Always follow proper hygienic and cleaning procedures when using this product.


Bowl left to right: 37 1/2" (953 mm) Bowl front to back: 13 1/2" (343 mm) Bowl depth: 10" (254 mm)

SSU2-2040-0040" (1016 mm) overall width with 37 1/2" (953 mm) wide sink compartment

technIcAl dAtA



SSU2-2040-00Hospital & Laboratory

REV-23561562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment surgical scrub station. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Franke hygenic waste with integral talipiece. (No separate waste fitting required) Access panel for service and maintenance. Supplied with wall hanger brackets. Certified to ASME A112.19.3-2008 / CSA B45.4-08.For models with faucets: Faucets certified to CSA B125 and ANSI/ASME A112.18.1, but are not listed with IAPMO (UPC) or NSF.



SSU1-00Faucet not included. Please specify hole drilling requirement when ordering.

technIcAl dAtA

Gross weight 49 kgBack splash yes Undercoated no Waste hole position left side Back splash height 4" (102 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

SSU1-10

3000T3370A AC powered hands-free faucet R2570-MIXLF thermostatic mixing valve Please note one transformer (RP32508 ordered separately) is required for the faucet. One transformer can power up to 10 faucets.

SSU1-11

3000T3370A AC powered hands-free faucet R2570-MIXLF thermostatic mixing valve C621T AC powered hands-free soap dispenser Please note one transformer (RP32508 ordered separately) is required for the faucet. One transformer can power up to 10 faucets.

SSU1-20

3001T3370A battery operated hands-free faucet R2570-MIXLF thermostatic mixing valve

SSU1-00, SSU1-10, SSU1-11, SSU1-20Hospital & Laboratory



SSU1 Rough-in Information

SSU1 SERIESHospital & Laboratory

ROUGH-IN DETAILS

Back side of unit is open

Clips to be positioned as required

Clip is 12 gauge galvanized steel

CAN BE MOUNTED TO POURED CONCRETE OR BLOCK WALL WITHOUT THE USE OF A SINK CARRIER



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double compartment surgical scrub station. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Franke hygenic waste with integral talipiece. (No separate waste fitting required) Access panel for service and maintenance. Removable divider. Please specify hole drilling requirement when ordering. Certified to ASME A112.19.3-2008 / CSA B45.4-08.




technIcAl dAtA

Gross weight 70 kgBack splash yes Undercoated no Waste hole position left side Back splash height 4" (102 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

SSU2-10

3000T3370A AC powered hands-free faucets (2pcs) R2570-MIXLF thermostatic mixing valves(2pcs) Please note one transformer (RP32508 ordered separately) is required for the faucet. One transformer can power up to 10 faucets.

SSU2-113000T3370A AC powered hands-free faucets(2pcs) R2570-MIXLF thermostatic mixing valves(2pcs) C621T AC powered hands-free soap dispensers (2pcs) Please note one transformer (RP32508 ordered separately) is required for the faucet. One transformer can power up to 10 faucets.

SSU2-203001T3370A battery operated hands-free faucets(2pcs) R2570-MIXLF thermostatic mixing valves(2pcs)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Triple compartment surgical scrub station. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Access panel for service and maintenance. Removable dividers. 1 1/2" (38mm) grid strainer. Please specify hole drilling requirement when ordering. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.




technIcAl dAtA

Gross weight 105 kgBack splash yes Undercoated no Waste hole position centre Back splash height 4" (102 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

SSU3-103000T3370A AC powered hands-free faucet R2570-MIXLF thermostatic mixing valve Please note one transformer (RP32508 ordered separately) is required for the faucet. One transformer can power up to 10 faucets.

SSU3-113000T3370A AC powered hands-free faucet R2570-MIXLF thermostatic mixing valve C621T AC powered hands-free soap dispenser Please note one transformer (RP32508 ordered separately) is required for the faucet. One transformer can power up to 10 faucets.

SSU3-203001T3370A battery operated hands-free faucet R2570-MIXLF thermostatic mixing valve




261/

16"

[66.

2cm

]

15" [38.1cm]

30" [76.2cm]30" [76.2cm]

FLOOR

1" [2.5cm]

4" [10.16cm]

FROM FLOOR

ø3/8" [ø1.0cm TYP]2" [5.1cm]

231/

4"[5

9.1c

m]

Lc

CLIP DETAIL

29" [73.7cm]29" [73.7cm]29" [73.7 cm]

REMOVABLEDIVIDERS

88 1/2" [225cm]

11" [2 7.9cm]

6 1/2" [16.5 cm]

4" [10.2cm]

23"

[58.

4cm

]

7 1/4" [18.4 2cm]

15 3/4" [40.0c m]

90" [228.6cm]

5" [12.7cm]

ø 5/16" [0.8cm]

1"[2.5cm]

1/2"[1.3cm]

1"[2.5cm]

1"[2.5cm]

NOTE: 1) BACK SIDE OF

UNIT IS OPEN

2) CLIPS TO BEPOSITIONED ASREQUIRED

3) CLIP IS 12 GA UGE GALVANIZED STEEL

CAN BE MOUNTED TOPOURED CONCRETEOR BLOCK WALL WITHO UTTHE USE OFA SINK CARRIER

SSU3 Rough- inInformation

� � � �

�

�CLIP DETAIL



ROUGH-IN DETAILS







Hands-free gooseneck faucet with laminar flow. Wall mountable water-proof control box. Preset/adjustable sensor range 3" to 15". Water flows when sensor is activated. Water flow stops at the selected run-on time after user removes hands from sensing zone. Run-on time selections are 0 to 8 seconds or 1 to 8 minutes for scrub-up applications. Factory set to 0 seconds. Blocking time between uses has selectable range of 1 to 8 seconds. Factory set to 1 second. Adjustable response time. Auto shut-off feature. Optional metered program mode with selection of 7 to 240 seconds of continuous operation. Adjustable sensing distance 76 to 381mm (3" to 15") factory set to 254mm (10") (± 1.0").CSA certified. Complies to ASME A112.18.1/CSA B125.1. ADA compliance to ICC / ANSI A117.1/ADA. Verified compliant with 0.25% weighted average Pb content regulations.

Overall front to back: 5 3/8" (136 mm) Overall left to right: 2 1/4" (57 mm) Overall height: 12 1/2" (317 mm)

3000T3370AAC powered (included with SSU-10 and SSU-11 models)

technIcAl dAtA

Material casing brass Gross weight 2.5 kgType of operation sensor operation

3001T3370ABattery operated hands-free faucet included with SSU-20 models.

technIcAl dAtA

Material casing brass Type of operation sensor operation Position of power connection from bottom

R2570-MIXLFDelta thermostatic mixing valve included with SSU_-10, SSU_-11 and SSU_-20 models.

Listed to ASSE 1069, ASSE 1070 and CSA B125.3

No drawing available

3000T3370A, 3001T3370A, R2570-MIXLFHospital & Laboratory

Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



Wall mounted electronic soap dispenser. Type 304 (CNS 18/10) stainless steel. When user puts hand under nozzle a dose of soap will drop. Adjust-able (1 to 3 sec) quantity of soap delivered through a self priming pump. Electrontic circuit, container and pump contained in 20 gauge (0.9mm) stainless steel box to be fixed to the wall. Outer casing is 16 gauge (1.5mm) thick to be fixed with vandal resistant stainless steel screws. Infrared electronic circuit indowed with built-in automatic anti-dripping device. Capacity of soap container is 1 litre. Pump of soap dispenser made of anti-acid material allowing use of soap or disinfectant of any density. As a part of regular maintenance and to prevent splashing, keep spout-nozzle (7.5) clean, so that soap does not dry on it. CSA - 18VAC plug-in transformer included.

Ships with models SSU-11, SSU2-11 and SSU3-11 optional: TB-9 hard wire transformer to operate up to 9 units.

C621T

C621THospital & Laboratory

Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

No drawing available



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Clinical hand wash basin. Left waste location with open access to allow for easy cleaning of P-Trap. Integral 1 1/2" (38mm) waste welded to bottom of the sink bowl. 18 gauge (1.2mm), type 304 (CNS 18/10) stain-less steel. Polished #4 satin finish. Radius coved bowl corners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance

Separate sink carrier is not required. This fixture is coated with SANIGUARD® product protection.SANI-GUARD® product protection is applied to all exposed surfaces of the sink. This treatment utilizes a silver ion technology to inhibit the growth of bacteria, molds and mildews. Silver ions are only released in the presence of bacteria-laden moisture and disrupt the metabolic and reproductive cycles of the micro-organisms.



AWHB1414P-00

technIcAl dAtA

Gross weight 10 kgType of waste kit integral tailpiece Back splash yes Undercoated no Waste hole position rear left Back splash height 6" (152 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


AWHB1414P-00Hospital & Laboratory



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

SSU backsplash accessory for SSU1, SSU2 and SSU3 surgeon scrub sinks. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Polished to a #4 satin finish. The SSU-BS provides a means to conceal the mixing valve and faucet controls inbehind the front access panel. The SSU-BS also protects the back wall from splashing and provides a means to mount a splash mounted faucet, soap and paper towel dispenser.

For SSU2 and SSU3, order and install 2 or 3pcs respectively.

SSU-BS

technIcAl dAtA

Gross weight 9.5 kg

SSU-BSHospital & Laboratory



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Z8000 Compliant Antimicrobial Hand Hygiene Sink. 18 gauge (1.2mm) type 304 stainless steel. Left rear waste location to prevent water from splashing directly into the waste from both the faucet and during hand washing. Integral 1 1/2" (DN 40) tailpiece is welded to the bottom of the basin. Waste is left open and shaped to prevent the assembly of plugs, strainers and anti-splash fittings which are not allowed by the Z8000 guidelines. High back and side walls contain splashing and protect adjacent surfaces from contamination. Recommended for laminar flow, user temperature controlled deck mounted faucet. Due to the strength and lightness of stainless steel, an in wall carrier is not required and the sink can be carried and installed by one person. A wall hanger bracket is used to mount the sink to the wall. This fixture is coated with SANIGUARD® product protection. SANI-GUARD® product protection is applied to all exposed surfaces of the sink. This treatment utilizes a silver ion technology to inhibit the growth of bacteria, molds and mildews. Silver ions are only released in the presence of bacteria-laden moisture and disrupt the metabolic and reproductive cycles of the micro-organisms. Patent Pending / Industrial Design Registration Pending

Overall front to back: 18 11/16" (475 mm) Overall left to right: 15" (381 mm) Overall height: 18 1/2" (470 mm)


HWS1414P-00

technIcAl dAtA

Gross weight 15 kgType of waste kit integral tailpiece Back splash yes Undercoated no Waste hole position rear left Back splash height 8" (203 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


relAted ProdUct

HWS-RS-00Removeable Shroud

HWS1414P-00Hospital & Laboratory




ROUGH-IN DETAILS

FOR REFERENCE ONLY. VERIFY AGAINST ACTUAL SINK PRIOR TO INSTALLATION.




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Z8000 Compliant Antimicrobial Hand Hygiene Sink. 18 gauge (1.2mm) type 304 stainless steel. Left rear waste location to prevent water from splashing directly into the waste from both the faucet and during hand washing. Integral 1 1/2" (DN 40) tailpiece is welded to the bottom of the basin. Waste is left open and shaped to prevent the assembly of plugs, strainers and anti-splash fittings which are not allowed by the Z8000 guidelines. High back and side walls contain splashing and protect adjacent surfaces from contamination. This hand hygiene sink is wider to permit forearm washing for light procedures as well as for mounting of paper towel and soap dispensers within the splash guard. Due to the large size of the backsplash, an additional rear wall splash guard is not required to comply with the Z8000 guidelines. Recommended for laminar flow, user temperature controlled deck mounted faucet. Due to the strength and lightness of stainless steel, an in wall carrier is not required and the sink can be carried and installed by one person. A wall hanger bracket is used to mount the sink to the wall. This fixture is coated with SANIGUARD® product protection. SANI-GUARD® product protection is applied to all exposed surfaces of the sink. This treatment utilizes a silver ion technology to inhibit the growth of bacteria, molds and mildews. Silver ions are only released in the presence of bacteria-laden moisture and disrupt the metabolic and reproductive cycles of the micro-organisms. Patent Pending / Industrial Design Registration Pending



HWS1420P-00

technIcAl dAtA

Gross weight 27 kgType of waste kit integral tailpiece Back splash yes Undercoated no Waste hole position rear left Back splash height 26 1/2" (673 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-






ROUGH-IN DETAILS



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Z8000 Compliant Antimicrobial Hand Hygiene Sink with integral shroud. 18 gauge (1.2mm) type 304 stainless steel. Right rear waste location to prevent water from splashing directly into the waste from both the faucet and during hand washing. Integral 1 1/2" (DN 40) tailpiece is welded to the bottom of the basin. Waste is left open and shaped to prevent the assembly of plugs, strainers and anti-splash fittings which are not allowed by the Z8000 guidelines. High back and side walls contain splashing and protect adjacent surfaces from contamination. Recommended for laminar flow, user temperature controlled, splash mounted faucet. Due to the strength and lightness of stainless steel, an in wall carrier is not required and the sink can be carried and installed by one person. A wall hanger bracket is used to mount the sink to the wall. This fixture is coated with SANIGUARD® product protection. SANI-GUARD® product protection is applied to all exposed surfaces of the sink. This treatment utilizes a silver ion technology to inhibit the growth of bacteria, molds and mildews. Silver ions are only released in the presence of bacteria-laden moisture and disrupt the metabolic and reproductive cycles of the micro-organisms. Patent Pending / Industrial Design Registration Pending

Overall front to back: 18" (457 mm) Overall left to right: 15" (381 mm) Overall height: 28 5/8" (727 mm)


HWSS1518P-00

technIcAl dAtA

Gross weight 18 kgType of mounting wall mounting Waste size DN 40 Type of waste kit integral tailpiece Back splash yes Undercoated no Waste hole position rear right Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

HWSS1518P-00 - no hole HWSS1518P-00/1 - 1 hole ∅1 1/8" (29mm) 9" (228mm) from top of basin, with anti rotation pin hole ∅0.25" (6.3mm) below. HWSS1518P-00/1W - Same as above with white Saniguard coating.

HWSS1518P-00Hospital & Laboratory



HWSS1518P-00Hospital & Laboratory

ROUGH-IN DETAILS



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment self rimming drop-in (or undermount) medical hand wash sink. 18 gauge (1.2mm), type 304 stainless steel. Sink compartment is angled to reduce splashing and waste is offset to reduce the risk of any bacteria contamination and splashing. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, sound deadening pads, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Right rear waste location, includes 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece.



HWS0610P-3

technIcAl dAtA

Gross weight 5.44 kgType of waste kit 1 1/2" (38mm) duplex waste assembly

with rubber stopper and 1 1/2" (DN38) brass tailpiece

Type of mounting drop in or undermountFaucet ledge noUndercoated yesWaste hole position right rearOverflow no Certificates and approvals pre-consumer recycled 31%, post-





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment self rimming drop-in (or undermount) medical hand wash sink. 18 gauge (1.2mm), type 304 stainless steel. Sink compartment is angled to reduce splashing and waste is offset to reduce the risk of any bacteria contamination and splashing. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, sound deadening pads, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Right rear waste location, includes 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece.



HWS6810P-3

technIcAl dAtA

Gross weight 7.25 kgType of waste kit 1 1/2" (38mm) duplex waste assembly

with rubber stopper and 1 1/2" (DN38) brass tailpiece

Type of mounting drop in or undermountFaucet ledge noUndercoated yesWaste hole position right rearOverflow no Certificates and approvals pre-consumer recycled 31%, post-





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Ra-dius coved bowl corners. One piece wall hanger. Includes 1 1/2" (38mm) duplex waste assembly with rubber stopper. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.



WHB1616-3

technIcAl dAtA

Gross weight 5 kgType of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre back Back splash height 8" (203 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

WHB1616-3/1 - 1 hole 1 1/2"(38mm) WHB1616-3/2 - 2 hole, 1 1/2" (38mm) diameter, 4"(102mm) centerset WHB1616-3 - Custom (non-returnable), specify hole drilling

WHB1616-3Wash Basins



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Ra-dius coved bowl corners. One piece wall hanger. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.

Overall front to back: 17" (432 mm) Overall left to right: 16 1/2" (419 mm) Overall height: 9 3/4" (247 mm)


WHB1617-61 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN40) brass tailpiece , with overflow

technIcAl dAtA

Gross weight 5 kgType of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre back Back splash height 3 3/4" (95 mm)Overflow yes Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

WHB1617-6/1, 1 hole, 1 1/2" diameter WHB1617-6/3, 3 hole, 1 1/2" diameter, 4" centerset WHB1617-6, Custom (non-returnable)




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




WHB1617-7accepts 1 1/4" (32mm) waste assembly (not included)

technIcAl dAtA

Gross weight 5 kgType of waste kit optional grid strainer Back splash yes Undercoated no Waste hole position centre back Back splash height 3 3/4" (95 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




WHB1617-31 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN40) brass tailpiece

technIcAl dAtA

Gross weight 5 kgType of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre back Back splash height 3 3/4" (95 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS





WHB1617 SERIESWash Basins

WHB1617 Rough-in Information

ROUGH-IN DETAILS



Hanger bracket is 14 gauge galvanized steel




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Ra-dius coved bowl corners. 16 gauge (1.5mm) side wall brackets. One piece wall hanger. Waste assembly included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.



WHB1819-31 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN40) brass tailpiece

technIcAl dAtA

Gross weight 6 kgWaste size DN 40 Type of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre Back splash height 3 3/4" (95 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




WHB1819-61 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2"(DN40) brass tailpiece, with overflow

technIcAl dAtA

Gross weight 6 kgWaste size DN 40 Type of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre Back splash height 3 3/4" (95 mm)Overflow yes Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




WHB1819-7accepts 1 1/4" (32mm) waste assembly (not included)

technIcAl dAtA

Gross weight 6 kgType of waste kit optional grid strainer Back splash yes Undercoated no Waste hole position centre Back splash height 3 3/4" (95 mm)Overflow yes Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS





WHB1819 Rough-in Information


ROUGH-IN DETAILS








Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Wall hung basin with shroud. Center waste location. 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Radius coved bowl corners. One piece wall hanger. Includes 1 1/2" (38mm) duplex waste assembly with rubber stopper. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.



WHBS181910-3

technIcAl dAtA

Gross weight 8 kgWaste size DN 40 Type of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre Back splash height 4" (102 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

WHBS181910-3/1, 1 hole, 1 1/2" diameter WHBS181910-3/3, 3 hole, 1 1/2" diameter, 4" center set WHBS181910-3, custom / non-returnable, faucet holes to be specified at time of order

WHBS181910-3Wash Basins



WHBS181910Wash Basins







Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Wall Hung Basin. Designed for either new installation or for replacement / retrofit onto select vitreous china wall carriers. Center back waste location. 18 gauge (1.2 mm) type 304 (CNS18/10) stainless steel. Exposed surfaces are #4 satin finished. Radius coved bowl corners. Grid strainer and one piece wall hanger bracket included. The edge is formed as an anti spill rim. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Available with optional shroud (WHB2221-RS) to cover the trap and water supplies. A third piece may be ordered for full under enclosure (WHB2221-UC). Model complies with ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance.


Bowl front to back: 13" (330 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 5" (127 mm)

WHB2221-7no overflow

technIcAl dAtA

Gross weight 7 kgWaste size DN 32 Type of waste kit grid waste with concealed threaded

connection Faucet ledge yes Back splash yes Undercoated no Waste hole position centre back Back splash height 4" (102 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

WHB2221-7/1, 1 hole 1 1/2" (38mm) diameter WHB2221-7/3, 3 hole 1 1/4" (32mm) diameter, 4" (102mm) centreset WHB2221-7, Custom (non-returnable), specify hole drilling




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Wall Hung Basin. Designed for either new installation or for replacement / retrofit onto select vitreous china wall carriers. Center back waste location. 18 gauge (1.2 mm) type 304 (CNS18/10) stainless steel. Exposed surfaces are #4 satin finished. Radius coved bowl corners. Grid strainer and one piece wall hanger bracket included. The edge is formed as an anti spill rim. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Available with optional shroud (WHB2221-RS) to cover the trap and water supplies. A third piece may be ordered for full under enclosure (WHB2221-UC).

Model complies with ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance.


Bowl front to back: 13" (330 mm) Bowl left to right: 14 1/2" (368 mm) Bowl depth: 5" (127 mm)

WHB2221-8with overflow

technIcAl dAtA

Gross weight 7 kgWaste size DN 32 Faucet ledge yes Back splash yes Undercoated yes Waste hole position centre back Back splash height 4" (102 mm)Faucet hole position middle Overflow yes Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

WHB2221-8/1, 1 hole 1 1/2" (38mm) diameter WHB2221-8/3, 3 hole 1 1/4" (32mm) diameter, 4" (102mm) centreset WHB2221-8, Custom (non-returnable), specify hole drilling





ROUGH-IN DETAILS

METHOD AInstallation without an in-wall carrier

METHOD BInstallation using an in-wall carrier

www.franke-commercial.com 26761562 | SPECIFICATIONS | REV. NOV_2015


WHB2221-RSRemovable shroud for WHB2221 series basin. Made from 18 gauge (1.2mm) stainless steel. Shroud measures 8"(203mm) wide and extends 12.5"(317mm) below the bottom of the basin. The shroud is satin finished.

WHB2221-UCUnder cover for WHB2221-RS removable shroud.

WHB2221-RS, WHB2221-UCWash Basins

Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

www.franke-commercial.com 26861562 | SPECIFICATIONS | REV. NOV_2015


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Designer double hand wash basin. 16 gauge 1.8mm thick T304 (CNS 18/10) stainless steel. Exposed surfaces are polished to a #4 satin finish. 1 ¼" (DN 32) waste fitting included with vandal resistant laser cut pyramid waste cover. Basin is installed using wall brackets, no separate carrier is required. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



WHB5222-7

technIcAl dAtA

Type of basin Single bowlGross weight 29.5 kgNet weight 14.5 kgType of mounting wall mounting Waste size DN 32 Waste kit included yes Type of waste kit grid waste with concealed threaded

connection Faucet ledge yes Back splash yes Bowl shape rectangle Number of bowls 1 Number of faucet holes 2 Noise prevention yes Undercoated yes Back splash height 4" (102 mm)Faucet hole diameter 1 1/2" (38 mm)Overflow no model oPtIonS

WHB5222-7/2, 2 faucet holes, 1 1/2" (38mm) diameter. WHB5222-7, Custom (non-returnable), specify hole drilling.




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm (19 gauge), seamless welded bowl with diameter 340x300x140 mm, rectangular shape, 120 mm tap ledge, front panel with 45° corner edges, prewelded mounting brackets, mounting conform EN 32, incl. screws and dowels. Optional shroud also available (refer to specification page WT-RS)


Bowl front to back: 12" (305 mm) Bowl left to right: 13 3/8" (340 mm) Bowl depth: 5 9/16" (142 mm)

WT400C-7Custom hole drilling, specifiy when ordering, no overflow, accepts 1 1/4" (32mm) waste - not included.

technIcAl dAtA

Gross weight 3.9 kgType of mounting wall mounting Waste size DN 32 Faucet ledge yes Waste hole position centre back Overflow no model oPtIonS

WT400C-7, Custom (non returnable), specify hole drilling WT400C-7/1, 1 hole 1 3/8" (35mm)

WT400C-8With overflow, accepts 1 1/4" (32mm) waste - not included.

technIcAl dAtA

Gross weight 3.9 kgType of mounting wall mounting Waste size DN 32 Faucet ledge yes Waste hole position centre back Overflow yes model oPtIonS


WT400C-7, WT400C-8Wash Basins



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm (19 gauge), seamless welded bowl with diameter 400x300x135 mm, rectangular shape, 105 mm tap ledge, front panel with 45° corner edges, prewelded mounting brackets, mounting conform EN 32, incl. screws and dowels. Optional shroud also available (refer to specification page WT-RS)


Bowl front to back: 11 7/16" (291 mm) Bowl left to right: 15 3/4" (400 mm) Bowl depth: 5 9/16" (141 mm)

WT500C-7custom hole drilling, specify when ordering, no oveflow, accepts 1 1/4" (32mm) waste - not included.

technIcAl dAtA

Gross weight 4.5 kgType of mounting wall mounting Waste size DN 32 Faucet ledge yes Bowl shape rectangle Waste hole position centre back Waste hole projection 8 11/16" (220 mm)Rear upstand no Overflow no model oPtIonS


WT500C-8With overflow, accepts 1 1/4" (32mm) waste - not included

technIcAl dAtA

Gross weight 4.5 kgType of mounting wall mounting Waste size DN 32 Faucet ledge yes Bowl shape rectangle Waste hole position centre back Waste hole projection 8 11/16" (220 mm)Rear upstand no Overflow yes model oPtIonS





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single wash basin for wall mounting, stainless steel, surface satin finished, material thickness 1 mm (19 gauge), seamless welded bowl with diameter 550x350x145 mm, rectangular shape, 90 mm tap ledge, front panel with 45° corner edges, prewelded mounting brackets, mounting conform EN 32, incl. screws and dowels. Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Optional shroud also available (refer to specification page WT-RS)



WT600C-7Custom hole drilling, specify when ordering, no overflow, accepts 1 1/4" (32mm) waste - not included.

technIcAl dAtA

Gross weight 5 kgType of mounting wall mounting Waste size DN 32 Faucet ledge yes Bowl shape rectangle Waste hole position centre back Waste hole projection 8 1/4" (210 mm)Rear upstand no Overflow no model oPtIonS


WT600C-8With overflow,accepts 1 1/4" (32mm) waste - not included.

technIcAl dAtA

Gross weight 5 kgType of mounting wall mounting Waste size DN 32 Faucet ledge yes Bowl shape rectangle Waste hole position centre back Waste hole projection 8 1/4" (210 mm)Rear upstand no Overflow yes model oPtIonS





Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Trap cover manufactured from 18 gauge, type 304 stainless steel. Exposed surfaces are satin finished. For wall mount installation of wash basin models WT400C, WT500C, WT600C and WHB1617 series.


WT-RS

technIcAl dAtA

Gross weight 3 kgType of mounting wall mounting

WT-RSWash Basins



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment corner wall mount wash basin wtih faucet ledge. Center waste location. 19 gauge (1.0mm) 18/10 stainless steel. Exposed surfaces are brushed finish. Includes installation kit. Accepts 1 1/4" (32mm) waste (not included).


WT310E-7

technIcAl dAtA

Gross weight 2.7 kgWaste size DN 32 Faucet ledge yes Undercoated no Waste hole position centre Overflow no Certificates and approvals LEED MR credit 4: recycled content

(1-2 points), cUPC approval model oPtIonS

WT310E-7 - Custom (non returnable), specify hole drilling WT310E-7/1 - 1 hole, 1 3/8" (35mm) diameter

WT310E-7Wash Basins



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Pedestal/Wall Hung Basin with faucet ledge made from 18 gauge (1.2mm) type 304 stainless steel. Polished satin finish. Radius coved bowl corners. Includes wall hanger bracket and 1 1/2" (38mm) duplex waste assembly, location centre. Please allow 4 weeks for delivery.

Overall front to back: 19" (483 mm) Overall left to right: 18 1/2" (470 mm) Overall height: 40" (1016 mm)


FWHB1819-3

technIcAl dAtA

Gross weight 24.1 kgWaste size DN 40 Type of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge yes Back splash yes Waste hole position centre Back splash height 9 13/16" (250 mm)Overflow no Certificates and approvals LEED MR credit 4: recycled content

(1-2 points), cUPC approval

FWHB1819-3Wash Basins



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Wall service sink. Center waste location. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Ra-dius coved bowl corners. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.



WSS6713no faucet hole / custom drilling

technIcAl dAtA

Gross weight 27 kgWaste size DN 50 Type of waste kit 3 1/2" crumb cup strainer Back splash yes Undercoated no Waste hole position centre Back splash height 12" (305 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


model oPtIonS

WSS6713/2, 2 hole, 1 1/4" diameter, 8" centerset WSS6713, Custom, non-returnable

WSS6713Wash Basins



WSS6713Wash Basins

WSS6713 Rough-in Information

5/16 Diameter holes typical

2 Clips to be positioned as required



61562 | SPECIFICATIONS | REV2016 279-Awww.franke-commercial.com


Wash BasinsANMW0010

Exos single wash basin made of MIRANIT, resin-bonded mineral compos-ite, with pore-free, smooth gelcoat high-polished surface (temperature-resistant up to 80°C), with storage surfaces and integral back panel with integrated brackets for wall mounting.

It has a seamless molded bowl, no overflow and lowered faucet ledge with faucet hole 1 3/8"" (35 mm) diameter. Mounting material and waste cover with InoxPlus coating included. Colour: Alpine white

Overall front to back: 19 11/16" (500 mm) Overall left to right: 23 5/8 (600 mm) Overall height: 5" (125 mm) Bowl front to back: 13 3/8 (340 mm) Bowl left to right: 15 (380 mm) Bowl depth: 3 9/16" (90 mm)

ANMW00101 3/8" (35 mm) Faucet hole

technIcAl dAtA

Gross weight 17.55 kg / 38.60 lbs.Waste size 1 3/8" (DN 50)Waste hole position centre Certificates and approvals pre-consumer recycled 31%, post-


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

61562 | SPECIFICATIONS | REV2016 279-Bwww.franke-commercial.com


Wash BasinsANMW0011

Exos single wash basin made of MIRANIT, resin-bonded mineral composite, with pore-free, smooth gelcoat high-polished surface (temperature-resistant up to 80°C), with storage surfaces and integral back panel with integrated brackets for wall mounting.

It has a seamless molded bowl, no overflow and lowered faucet ledge with faucet hole 1 3/8"" (35 mm) diameter. Mounting material and waste cover with InoxPlus coating included. Colour: Alpine white

Overall front to back: 19 11/16" (500 mm) Overall left to right: 35 7/16 (900 mm) Overall height: 5" (125 mm) Bowl front to back: 13 3/8 (455 mm) Bowl left to right: 19 11/16'' (500 mm) Bowl depth: 3 9/16" (90 mm)

ANMW00111 3/8" (35 mm) Faucet hole

technIcAl dAtA

Gross weight 25.05 kg / 55.10 lbs.Waste size 1 3/8" (DN 50)Waste hole position centre Certificates and approvals pre-consumer recycled 31%, post-


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Mop service sink. Center waste location. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Integral corner splashguard. Can be installed in either left or right corners. Undercoated to reduce condensation and resonance. One piece wall hangers. Includes 2" IPS grid shower waste. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.



FSS222210/316-1

technIcAl dAtA

Gross weight 25 kgType of waste kit 2" IPS grid strainer Faucet ledge no Back splash yes Undercoated no Waste hole position centre Back splash height 12" (305 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


FSS222210/316-1Utility Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Mop service sink. Center waste location. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Integral splashguard left and rear sides. Drop front feature facilitates easy drainage of power driven floor maintenance equipment. Undercoated to reduce condensation and resonance. One piece wall hangers.Includes 2" IPS grid shower drain. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.



FSSOL223410/316-1

technIcAl dAtA



FSSOL223410/316-1Utility Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Mop service sink. Center waste location. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Integral splashguard left and rear sides. Drop front feature facilitates easy drainage of power driven floor maintenance equipment. Undercoated to reduce condensation and resonance. One piece wall hangers. Includes 2" IPS grid shower drain. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.



FSSOR223410/316-1

technIcAl dAtA



FSSOR223410/316-1Utility Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Mop service sink. Center waste location. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Integral splashguard left and rear sides. Undercoated to reduce condensation and resonance. One piece wall hangers. Includes 2" IPS grid shower waste. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.



FSSL223410/316-1

technIcAl dAtA



FSSL223410/316-1Utility Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Mop service sink. Center waste location. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Integral splashguard right and rear sides. Undercoated to reduce condensation and resonance. One piece wall hangers. Includes 2" IPS grid shower drain. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.



FSSR223410/316-1

technIcAl dAtA



FSSR223410/316-1Utility Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Mop service sink. Center waste location. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Integral splashguard back and side. Can be installed in either left or right corners. Undercoated to reduce condensation and resonance. One piece wall hangers. Includes 2" IPS grid shower drain. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.



FSS2210/316-1

technIcAl dAtA

Gross weight 25 kgType of waste kit threaded tailpiece Faucet ledge no Back splash yes Undercoated no Waste hole position centre Back splash height 12" (305 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


FSS2210/316-1Utility Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Mop service sink. Center waste location. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Undercoated to reduce condensation and resonance. One piece wall hangers. Can be installed in either left or right corners. Comes with integral back splash and side splash. Drop front feature to facilitate easy drainage of power driven floor maintenance equipment. Includes 2" IPS grid shower drain. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.



FSSO2210/316-1

technIcAl dAtA



FSSO2210/316-1Utility Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment sewage sampling sink without drainboard. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Anti-splash rim. Stainless steel 3/4"(19mm) O.D. flushing tube with 1/2"(12.7mm) NPS connection. 3" x 3" (76mm x 76mm) threaded waste outlet. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.



SSS1827

technIcAl dAtA

Gross weight 70 kgType of waste kit threaded tailpiece Faucet ledge no Back splash yes Undercoated no Waste hole position centre Back splash height 6 3/4" (171 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


SSS1827Utility Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment sewage sampling sink with left/right drainboard. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Anti-splash rim. Stainless steel 3/4" (19mm) O.D. flushing tube with 1/2"(12.7mm) NPS connection. 3" x 3" (76mm x 76mm) threaded waste outlet. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.



SSS1827SDSRright drain board

technIcAl dAtA

Gross weight 80 kgType of waste kit threaded tailpiece Faucet ledge no Back splash yes Undercoated no Waste hole position centre Drainer position right Back splash height 6 3/4" (171 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


SSS1827SDSRUtility Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment sewage sampling sink with left/right drainboard. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Anti-splash rim. Stainless steel 3/4" (19mm) O.D. flushing tube with 1/2"(12.7mm) NPS connection. 3" x 3" (76mm x 76mm) threaded waste outlet. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.



SSS1827SDSLleft drain board

technIcAl dAtA

Gross weight 80 kgType of waste kit threaded tailpiece Faucet ledge no Back splash yes Undercoated no Waste hole position centre Drainer position left Back splash height 6 3/4" (171 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


SSS1827SDSLUtility Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment sewage sampling sink left and right drainboard. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Radius coved bowl corners. Anti-splash rim. Stainless steel 3/4" (19mm) O.D. flushing tube with 1/2"(12.7mm) NPS connection. 3" x 3" (76mm x 76mm) threaded waste outlet. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.



SSS1827DDS

technIcAl dAtA

Gross weight 90 kgType of waste kit threaded tailpiece Faucet ledge no Back splash yes Undercoated no Waste hole position centre Drainer position left & right Back splash height 6 3/4" (171 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


SSS1827DDSUtility Sinks



Single compartment wash trough. Center waste location. 14 gauge (2.0mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Radius coved bowl corners and rolled radius rim. 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery.TechnicAl dATA

Gross weight 35 kg (WTS2025-1) 45 kg (WTS2031-1) 51 kg (WTS2036-1) 67 kg (WTS2048-1) 85 kg (WTS2060-1) 103 kg (WTS2072-1) 127kg (WTS2096-1) Waste size DN 40 Type of waste kit 3 1/2" crumb cup strainer Back splash yes Undercoated no Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Heavy Duty Series WTSUtility Sinks

ProjecT informATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



B (lefT-righT)

c (fronT-BAck)

d (lefT-righT)

e (dePTh)

f BAckSPlASh

WASTe locATion

fAUceT holeS

WTS2025-1 20" (508 mm) 25" (635 mm) 16 1/2" (419 mm) 22" (559 mm) 10 1/2" (267 mm) 6" (152 mm) C N/A

WTS2031-1 20" (508 mm) 31" (787 mm) 16 1/2" (419 mm) 28" (711 mm) 10 1/2" (267 mm) 6" (152 mm) C N/A

WTS2036-1 20" (508 mm) 36" (914 mm) 16 1/2" (419 mm) 33" (838 mm) 8" (203 mm) 10" (254 mm) C N/A







Single compartm ent wash trough. Center waste location. 16 gauge (1.5mm), type 304 (CNS 18/10) stainless steel. Exposed surfaces are #4 satin finished. Radius coved bowl corners and rolled radius rim. 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Please allow 4 weeks for delivery. 1 1/2" (38mm) waste option available as custom request.TechnicAl dATA

Gross weight 47 kg (WTS36-1)Gross weight 59 kg (WTS48-1)Gross weight 75 kg (WTS60-1)Gross weight 91 kg (WTS72-1)Waste size DN 40 Type of waste kit 3 1/2" crumb cup strainer Back splash yes Undercoated no Waste hole position centre Back splash height 8" (203 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Standard Series WTSUtility Sinks

ProjecT informATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



B (lefT-righT)

c (fronT-BAck)

d (lefT-righT)

e (dePTh)

f BAckSPlASh

WASTe locATion

fAUceT holeS

WTS36-1 18" (457 mm) 36" (914 mm) 14 3/4" (375 mm) 33 1/2" (851 mm) 8" (203 mm) 8" (203 mm) C N/A






Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel. Polished #4 satin finish. Undercoated to reduce condensation and resonance. Positive hold down clamping. Hinged top cover. Embossed cross. 1 1/2" (38mm) duplex waste assembly included. Center waste location. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



RS14

technIcAl dAtA

Type of basin laboratory sink Gross weight 5 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge no Undercoated no Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


RS14Sacrarium Sinks



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment self rimming drop-in sink less faucet ledge. 20 gauge (0.9mm), type 302 (CNS 18/8) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Hinged top cover. Embossed cross. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



SS9126Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, includes 3 1/2” (89mm) crumb cup strainer with 1 1/2” (DN38) brass tailpiece.

technIcAl dAtA

Gross weight 5.5 kgFaucet ledge no Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


SS9126Sacrarium Sinks



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



S9106/316P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, 3 1/2” (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2” (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.

TechnicAl dATA



S9106/316P-1Type 316 Laboratory Sinks



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




S9106/316P-3Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines) and ANSI A117.1 (Accessible and usable buildings and facilities). Check local codes to ensure compliance. Center waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2” (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 2.3 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




S9407/316P-1center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.

TechnicAl dATA






Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




S9407/316P-3center waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece

TechnicAl dATA

Type of basin Single Compartment Gross weight 0.1 kgNet weight 2.1 kgType of mounting counter top mounting Waste size DN 40 Waste kit included yes Faucet ledge no Bowl shape rounded rectangle Waste hole position centre Rear upstand no Overflow no




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




S6407/316P-1center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.

TechnicAl dATA






Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Center back waste location. Includes 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



S6410/316PCB-1center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-


S6410/316PCB-1Type 316 Laboratory Sinks



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




S6808/316P-1center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




S6810/316P-1center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.

TechnicAl dATA






Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




S6810/316P-3left rear waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece

TechnicAl dATA

Type of basin Single Compartment Gross weight 8.4 kgType of mounting counter top mounting Waste size DN 40 Waste kit included yes Faucet ledge no Bowl shape rounded rectangle Waste hole position rear left Rear upstand no Overflow no




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment self rimming drop-in sink with faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and reso-nance. Includes waste fitting, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



LBS9407/316P-1center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 4.1 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

LBS9407/316P-1/1, 1 hole, 1 1/2" diameter LBS9407/316P-1/2, 2 hole, 1 1/2" diameter, 4" centers LBS9407/316P-1/3, 3 hole, 1 1/2" diameter, 4" centers LBS9407/316P-1, Custom (non-returnable)

LBS9407/316P-1Type 316 Laboratory Sinks



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBS9407/316P-3center waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece

TechnicAl dATA

Type of basin Single Compartment Gross weight 4.1 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

LBS9407/316P-3/1, 1 hole, 1 1/2" diameter LBS9407/316P-3/2, 2 hole, 1 1/2" diameter, 4" centers LBS9407/316P-3, Custom (non-returnable)




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA



Model opTionS

LBS4607/316P-1/1, 1 hole, 1 1/2" diameter LBS4607/316P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBS4607/316P-1, Custom (non-returnable)




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA

Type of basin Single Compartment Gross weight 6.4 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

LBS4610/316P-1/1, 1 hole 1 1/2" diameter LBS4610/316P-1/2, 2 hole 1" diameter 2 3/4" centreset LBS4610/316P-1/3, 3 hole 1 1/2" diameter, 8" centreset




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBS4610/316PC-3center waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece

TechnicAl dATA

Type of basin Single Compartment Gross weight 4.9 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

LBS4610/316PC-3/1, 1 hole, 1 1/2" diameter LBS4610/316PC-3/2, 2 hole, 1 1/2" diameter, 2 3/4" centerset LBS4610/316PC-3/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBS4610/316PC-3, Custom (non-returnable)

LBS4610/316PC-3Type 316 Laboratory Sinks



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBS6407/316P-1center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 4.2 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre back Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




ALBS6805/316P-1Wheelchair accessible - Meets ADA (Americans with disabilities act guidelines), ANSI A117.1 (Accessible and usable buildings and facilities), and CSA B651-04 (Accessible design for the built environment). Check local codes to ensure compliance. Left rear waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.

TechnicAl dATA

Type of basin Single Compartment Gross weight 4.7 kgType of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position rear left Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

ALBS6805/316P-1/1, 1 hole, 1 1/2" diameter ALBS6805/316P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset ALBS6805/316P-1, Custom (non-returnable)

ALBS6805/316P-1Type 316 Laboratory Sinks



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA

Type of basin Single Compartment Gross weight 5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre back Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA

Type of basin Single Compartment Gross weight 5.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre back Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes





TechnicAl dATA

Type of basin Single Compartment Gross weight 6 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes




LBS6810/316P-3left rear waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece

TechnicAl dATA

Type of basin Single Compartment Gross weight 6 kgType of waste kit 1 1/2" duplex waste with rubber stopper Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position rear left Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double compartment self rimming drop-in sink less faucet ledge. 18 gauge (1.2mm), type 316 (CNS 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fittings, factory applied rim seal, cutout template, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



D6410/316PCB-1center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.

TechnicAl dATA

Type of basin Double Compartment Gross weight 8.6 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Spillway yes Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


D6410/316PCB-1Type 316 Laboratory Sinks



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double compartment self rimming drop-in sink with faucet ledge. Center back waste location. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal, factory installed EZ TORQUE™ fasteners and 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



LBD6408/316P-18" (203mm) deep, centre back waste location, 3 1/2" (89mm) type 316 crumb cup waste

TechnicAl dATA

Type of basin Double Compartment Gross weight 8.5 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre back Spillway yes Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

LBD6408/316P-1/1, 1 hole, 1 1/2" diameter LBD6408/316P-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centreset LBD6408/316P-1/4, 4 hole, as 3 hole above, plus 1 hole 4" to the right LBD6408/316P-1, Custom (non-returnable)

LBD6408/316P-1Type 316 Laboratory Sinks



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double compartment self rimming drop-in sink with faucet ledge. Center back waste location. 18 gauge (1.2mm), type 316 (EN1.4401 18/10) stain-less steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes factory applied rim seal, factory installed EZ TORQUE™ fasteners, and waste kit. Certified to ASME A112.19.3-2008 / CSA B45.4-08.



LBD6410/316PCB-1center back waste location, includes 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.

TechnicAl dATA

Type of basin Double Compartment Gross weight 9.3 kgType of waste kit 3 1/2" crumb cup strainer Faucet ledge yes Number of faucet holes 0 Undercoated yes Waste hole position centre back Spillway yes Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

LBD6410/316PCB-1/1, 1 hole, 1 1/2" diameter, centered over partition LBD6410/316PCB-1/3, 3 hole, 8" centerset, 1 1/2" diameter, centered over partition LBD6410/316PCB-1/X, Custom (non-returnable)

LBD6410/316PCB-1Type 316 Laboratory Sinks



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment undermount sink. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, cutout template, and installation hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.



UCS4608/316P-1

TechnicAl dATA

Type of basin Single Compartment Gross weight 6.8 kgType of mounting undermount Waste size DN 40 Waste kit included yes Faucet ledge no Bowl shape rounded rectangle Waste hole position centre Rear upstand no Overflow no Certificates and approvals pre-consumer recycled 31%, post-


UCS4608/316P-1Type 316 Laboratory Sinks



Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment undermount sink. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, cutout template, and installation hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.



UCS4610/316P-1

TechnicAl dATA

Type of basin Single Compartment Gross weight 4.8 kgType of mounting undermount Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment undermount sink. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, cutout template, and installation hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center back waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.



UCS6808/316P-1

TechnicAl dATA

Type of basin Single Compartment Gross weight 4.8 kgType of mounting undermount Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre back Overflow no Certificates and approvals pre-consumer recycled 31%, post-





Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single compartment undermount sink. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, cutout template, and Universal Installation System hardware. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.



UCS6810/316P-1

TechnicAl dATA

Type of basin Single Compartment Gross weight 6.4 kgType of mounting undermount Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-





Single compartment scullery sink. 16 gauge (1.5mm), type 316 (EN1.4401 17/12/2) stainless steel. Polished to a #4 satin finish. Sink compartments sloped to drain with radius coved corners on front and back only. Rolled Rim. Stainless Steel tubular legs with adjustable feet. Type 316 (EN1.4401 17/12/2) waste fitting included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. This series of scullery sinks are built to order and are non-returnable.

BAckSplASh9" (230 mm)

WASTe Size-1 = 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece. -5 = 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece with standpipe and guard

FAUceT hole opTionS (STAndArd)Standard drilling is one set of 2 hole, 1 1/4" (32mm) diameter, 8" (203mm) centerset. Punched 4" (102mm) below top of backsplash.

Floor To Work SUrFAce35" (890 mm)

Classic Series - 16 gaugeType 316 Laboratory Sinks

projecT inForMATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes


overAll diMenSionS Sink coMpArTMenT diMenSionS

Model A (FronT-BAck)

B (leFT-righT)

c (FronT-BAck)

d (leFT-righT)

e (depTh)

F BAckSplASh

WASTe locATion

FAUceT holeS

SL2424/316-1 27 3/16" (691 mm) 27 3/16" (691 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) C 2

SL2424/316-5 27 3/16" (691 mm) 27 3/16" (691 mm) 24" (610 mm) 24" (610 mm) 14" (356 mm) 9" (229 mm) RR 2

SL2448/316-1 27 3/16" (691 mm) 51 3/8" (1305 mm) 24" (610 mm) 48" (1219 mm) 14" (356 mm) 9" (229 mm) C 2

SL2448/316-5 27 3/16" (691 mm) 51 3/8" (1305 mm) 24" (610 mm) 48" (1219 mm) 14" (356 mm) 9" (229 mm) RR 2




Single compartment self rimming drop-in sink without faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Center waste location, 3 1/2" (89mm) type 316 (EN1.4401 17/12/2) stainless steel crumb cup strainer with 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.TechnicAl dATA

Type of basin Single Compartment Gross weight 16.4 kg (ART36/316-1)Gross weight 17.7 kg (ART48/316-1)Gross weight 19.1 kg (ART60/316-1)Type of mounting drop in Type of waste kit 3 1/2" crumb cup strainer Faucet ledge no Undercoated yes Waste hole position centre Faucet hole diameter 1 1/2" (38 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Art Room - 18 gaugeType 316 Laboratory Sinks

projecT inForMATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Type 316 - 18 gauge



B (leFT-righT)

c (FronT-BAck)

d (leFT-righT)

e (depTh)

F BAckSplASh

WASTe locATion

FAUceT holeS

ART36/316-1 19 1/8" (486 mm) 38 1/8" (969 mm) 17" (432 mm) 36" (914 mm) 8" (203 mm) N/A C N/A





Single compartment self rimming drop-in sink without faucet ledge. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensation and resonance. Includes waste fitting, factory applied rim seal, and factory installed EZ TORQUE™ fasteners. Certified to ASME A112.19.3-2008 / CSA B45.4-08.

Center waste location, 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly with rubber stopper and 1 1/2" (DN38) type 316 (EN1.4401 17/12/2) stainless steel tailpiece.TechnicAl dATA

Type of basin Single Compartment Gross weight 16.4 kg (ART36/316-3C)Gross weight 17.7 kg (ART48/316-3C)Gross weight 19.1 kg (ART60/316-3C)Type of mounting counter top mounting Waste size DN 40 Waste kit included yes Faucet ledge no Bowl shape rectangle Waste hole position centre Rear upstand no Overflow no

Art Room - 18 gaugeType 316 Laboratory Sinks

projecT inForMATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Type 316 - 18 gauge



B (leFT-righT)

c (FronT-BAck)

d (leFT-righT)

e (depTh)

F BAckSplASh

WASTe locATion

FAUceT holeS

ART36/316-3C 19 1/8" (486 mm) 38 1/8" (969 mm) 17" (432 mm) 36" (914 mm) 8" (203 mm) N/A C N/A





Single compartment self rimming drop-in sink with faucet ledge and drain board. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Waste fittings included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Note: Please allow 4 weeks for delivery.



LBSDBL6810/316P-1Drain board is located to the left of sink bowl and is sloped for drainage, center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

TechnicAl dATA



Model opTionS

LBSDBL6810/316-1/1, 1 hole, 1 1/2" diameter LBSDBL6810/316-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBSDBL6810/316-1, Custom (non-returnable)

LBSDBL6810/316P-1Type 316 Laboratory Sinks

projecT inForMATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



Single compartment self rimming drop-in sink with faucet ledge and drain board. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are #4 satin finished. Undercoated to reduce condensa-tion and resonance. Waste fittings included. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Note: Please allow 4 weeks for delivery.



LBSDBR6810/316P-1Drain board is located to the right of sink bowl and is sloped for drainage, center waste location, includes 3 1/2" (89mm) crumb cup strainer with 1 1/2" (DN38) brass tailpiece

TechnicAl dATA



Model opTionS

LBSDBR6810/316-1/1, 1 hole, 1 1/2" diameter LBSDBR6810/316-1/3, 3 hole, 1 1/2" diameter, 4" centers, 8" centerset LBSDBR6810/316-1, Custom (non-returnable)

LBSDBR6810/316P-1Type 316 Laboratory Sinks

projecT inForMATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



Single bowl commercial laboratory sink. 20 gauge (0.9mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are sand-blast finished. Positive hold down clamping. 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly is integral (tailpiece optional*). Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center waste location These sinks do not include tailpiece. A type 316 tailpiece is available by ordering 315-9/316.


Bowl front to back: 3" (76 mm) Bowl left to right: 6" (152 mm) Bowl depth: 3 11/16" (94 mm)

OC6/316

TechnicAl dATA

Type of basin laboratory sink Gross weight 15.5 kgNet weight 11.5 kgType of mounting counter top mounting Waste size DN 40 Faucet ledge no Bowl shape oval Waste hole position centre Overflow no

OC6/316Type 316 Laboratory Sinks

projecT inForMATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



Single bowl commercial laboratory sink. 20 gauge (0.9mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are sand-blast finished. Positive hold down clamping. 1 1/2" (38mm) type 316 (EN1.4401 17/12/2) stainless steel duplex waste assembly is integral (tailpiece optional*). Certified to ASME A112.19.3-2008 / CSA B45.4-08. Center waste location. These sinks do not include tailpiece. A type 316 tailpiece is available by ordering 315-9/316.


Bowl front to back: 6" (152 mm) Bowl left to right: 6" (152 mm) Bowl depth: 4 1/2" (114 mm)

RC6/316

TechnicAl dATA

Type of basin laboratory sink Gross weight 0.9 kgType of waste kit threaded tailpiece Undercoated no Waste hole position centre Overflow no Certificates and approvals pre-consumer recycled 31%, post-


RC6/316Type 316 Laboratory Sinks

projecT inForMATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes



projecT inForMATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are polished #4 satin finished. Radius coved bowl corners. One piece wall hanger. Includes type 316 (EN1.4401 17/12/2) 1 1/2" (38mm) duplex waste assembly with rubber stopper. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.



WHB1617/316-3no faucet hole / custom drilling

TechnicAl dATA

Gross weight 5 kgType of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre back Back splash height 3 3/4" (95 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

WHB1617/316-3/1, 1 hole, 1 1/2" diameter WHB1617/316-3/3, 3 hole, 1 1/2" diameter, 4" centerset WHB1617/316-3, Custom (non-returnable)

WHB1617/316-3Type 316 Laboratory Sinks




ROUGH-IN DETAILS



Hanger Bracket is 14 gauge galvanized steel




projecT inForMATion

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Wall hung basin. Center back waste location. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are polished #4 satin finished. Radius coved bowl corners. One piece wall hanger. Includes type 316 (EN1.4401 17/12/2) 1 1/2" (38mm) duplex waste assembly with rubber stopper. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.



WHB1819/316-3no faucet hole / custom drilling, 1 1/2" (38mm) duplex waste assembly with rubber stopper and 1 1/2" (DN38) brass tailpiece

TechnicAl dATA

Gross weight 6 kgType of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre Back splash height 3 3/4" (95 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

WHB1819/316-3/1, 1 hole, 1 1/2" diameter WHB1819/316-3/3, 3 hole, 1 1/2" diameter, 4" centerset WHB1819/316-3, Custom (non-returnable)





ROUGH-IN DETAILS



Hanger Bracket is 14 gauge galvanized steel




Project InformatIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Wall hung basin with shroud. Center waste location. 18 gauge (1.2mm), type 316 (EN1.4401 17/12/2) stainless steel. Exposed surfaces are polished #4 satin finished. Radius coved bowl corners. One piece wall hanger. Includes 1 1/2" (38mm) duplex waste assembly with rubber stopper. Certified to ASME A112.19.3-2008 / CSA B45.4-08. Separate sink carrier is not required.



WHBS181910/316-3

TechnicAl dATA

Gross weight 8 kgWaste size DN 40 Type of waste kit 1 1/2" duplex waste with rubber stopper Back splash yes Undercoated no Waste hole position centre Back splash height 4" (102 mm)Overflow no Certificates and approvals pre-consumer recycled 31%, post-


Model opTionS

WHBS181910/316-3/1, 1 hole, 1 1/2" diameter WHBS181910/316-3/3, 3 hole, 1 1/2" diameter, 4" center set WHBS181910/316-3/X, custom / non-returnable, faucet holes to be specified at time of order

WHBS181910/316-3Type 316 Laboratory Sinks



WHBS181910-316-3Type 316 Laboratory Sinks







Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Single urinal for wall mounting, stainless steel, surface satin finished, material thickness 1.2 mm, oval bowl, hidden horizontal outlet towards wall, mounting and fixing conform to EN 80, hidden screws, included trap DN 50, included mounting bracket and domed waste.


CMPX538with stainless steel spreader 1/2" CE Certified

technIcAl dAtA

Type of urinal single urinal Gross weight 8.9 kgNet weight 7.3 kgType of mounting wall mounting Type of waste kit domed waste Inlet size DN 50 Outlet size DN 50 Siphon included yes Type of flushing water Water inlet concealed Water outlet concealed

CMPX538Urinals and Toilets



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

The fixture is fabricated from 16 gauge (1.8mm) type 304 (CNS 18/10) stainless steel. The elongated bowl is drawn and seamlessly welded and polished to a #4 satin finish. The toilet seat is polished to a sanitary mirror finish. Internal piping is 14 gauge (2.0mm) type 304 (CNS 18/10) stainless steel. Elongated design blow out jet bowl. The toilet requires a minimum of 35 PSI flow pressure. The toilet was tested and certified as a low water consumption toilet using only 1.6 gpf (6 lpf). The trap will pass a 2 1/8" (54mm) ball and has a seal of 3.5" (88.9mm) min. Flush valve connection is 1 1/2" (38.1mm) FIPT rear spud. Installation: These fixtures are designed to be installed onto a 3 bolt blow out jet wall carrier.


HDWC2414-FM-Rfront mounted

technIcAl dAtA

Type of mounting front mounted Type of WC wall hung Inlet size G 1 1/4 B Minimum flushing capacity 6.000 l

HDWC2414-FM-RUrinals and Toilets



The latest rough in information is supplied with each fixture. Do not rough in without first verifying dimensions. Franke Kindred Canada reserves the right to make design and specification changes without prior notice. Franke Kindred Canada will not assume any responsibility for the use of obsolete data.

Please visit www.franke-commercial.com for the latest specifications.

HDWC2414-FM-RUrinals and Toilets

ROUGH-IN DETAILS



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

The fixture is fabricated from 16 gauge (1.8mm) type 304 (CNS 18/10) stainless steel. The elongated bowl is drawn and seamlessly welded and polished to a #4 satin finish. The toilet seat is polished to a sanitary mirror finish. Internal piping is 14 gauge (2.0mm) type 304 (CNS 18/10) stainless steel. Elongated design blow out jet bowl. The toilet requires a minimum of 35 PSI flow pressure. The toilet was tested and certified as a low water consumption toilet using only 1.6 gpf (6 lpf). The trap will pass a 2 1/8" (54mm) ball and has a seal of 3.5" (88.9mm) min. Flush valve connection is 1 1/2" (38.1mm) FIPT top spud. A standard elongated toilet seat (supplied by others) can be used with this product. Fixture can be installed to a standard 3 bolt wall carrier for blowout jet toilets.


HDWC2514-FM-Tfront mounted

technIcAl dAtA

Type of mounting front mounted Type of WC wall hung Inlet size G 1 1/4 B Minimum flushing capacity 6.000 l

HDWC2514-FM-TUrinals and Toilets



The latest rough in information is supplied with each fixture. Do not rough in without first verifying dimensions. Franke Kindred Canada reserves the right to make design and specification changes without prior notice. Franke Kindred Canada will not assume any responsibility for the use of obsolete data.

Please visit www.franke-commercial.com for the latest specifications.

HDWC2514-FM-TUrinals and Toilets

ROUGH-IN DETAILS



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Deluxe shower curtain. Opaque white vinyl, matte finish with nickel-plated grommets

CV-00Overall size left to right: 70" (1780 mm) Overall height: 72" (1830 mm)



CV-00, CV-01, CV-02Washroom Accessories

LSection only of curtain shown



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Curtain rod, stainless steel tubing, 1 1/4" (32mm) diameter. Exposed surfaces finished to a #4 satin finish. Polished chrome flanges and mount-ing hardware included.

CR-3636" (914mm) length




CR-36, CR-48, CR-60, CR-72Washroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Curtain Hook (polished chrome finish) (12 pcs)

CH-01stainless steel wire, with snap ring locking device and rollers with polished chrome finish. Overall size left to right: 1 1/2" (38 mm) Overall height: 2 7/8" (73 mm)

CH-02stainless steel wire, with snap ring locking device and polished chrome finish. Overall size left to right: 1 1/2" (38 mm) Overall height: 2 5/8" (67 mm)

Product picture: CH-01 Product picture: CH-02

CH-01, CH-02Washroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Corner guard made from 18 gauge (1.2mm), type 304 18/10 stainless steel. Pre-drilled for fasteners (not included), no return bend. Satin finished.

Overall front to back: 3" (76 mm) Overall left to right: 3" (76 mm) Overall height: 48 1/16" (1220 mm)

ACG-48Corner Guard

ACG-48Washroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Hook for wall mounting, stainless steel, surface satin finished, 17 mm (.669") pipe diameter, drilled hole on bottom for fixation, incl. stainless steel screws and dowels.

Overall front to back: 2 3/8" (60 mm) Overall left to right: 11/16" (18 mm) Overall height: 1 1/2" (38 mm)

STRX692

Technical daTa

Gross weight 0.1 kgNet weight 0.1 kgType of mounting wall mounting Number of hooks 1

STRX692Washroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double hook for wall mounting, stainless steel, surface satin finished, 18 mm (.7") pipe diameter, drilled hole on bottom for fixation, incl. stainless steel screws and dowels.

Overall front to back: 2 3/8" (60 mm) Overall left to right: 2 11/16" (69 mm) Overall height: 11/16" (18 mm)

STRX694

Technical daTa

Gross weight 0.1 kgNet weight 0.1 kgType of mounting wall mounting Number of hooks 2

STRX694Washroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

1 1/4" (32mm) diameter. 18 gauge (1.2mm) type 304 (CNS 18/10) stainless steel tubing. Exposed surfaces finished to a #4 satin with peened texture finish in grab locations. Concealed snap flanges and mounting hardware included. Provide adequate backing in wall for support and comply to local codes for barrier free requirements.

QC-1W-18PStraight grab bar, 18" (457mm) length

Technical daTa

Type of grab rail straight bar Certificates and approvals pre-consumer recycled 31%, post-



Technical daTa




Technical daTa




Technical daTa



QC-1W SeriesWashroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Angled Grab Bar, 30" x 30" (760mm x 760mm) with centre support. 18 gauge (1.2mm) type 304 (CNS 18/10) stainless steel tubing. Exposed surfaces finished to a #4 satin with peened texture finish in grab locations. Concealed snap flanges and mounting hardware included. Provide adequate backing in wall for support and comply to local codes for barrier free requirements.


QC-1W-3030P1 1/4" (32mm) diameter

Technical daTa

Type of grab rail corner bar Certificates and approvals pre-consumer recycled 31%, post-


QC-1W-3030PWashroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Angled grab bar, with centre support. 18 gauge (1.2mm) type 304 (CNS 18/10) stainless steel tubing. Exposed surfaces finished to a #4 satin with peened texture finish in grab locations. Concealed snap flanges and mounting hardware included. Provide adequate backing in wall for support and comply to local codes for barrier free requirements.

QC-2W-2436PTwo wall angled grab bar, 24" x 36" (610mm x 915mm) with centre support

Technical daTa



QC-2W-3030PTwo wall angled grab bar, 30" x 30" (760mm x 760mm) with centre support.

Technical daTa



QC-2W-2436P, QC-2W-3030PWashroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Back rest. Stainless steel bar uses #4 gloss with flanges and covers, with antique white solid core plastic laminate panel back. Concealed snap flanges and mounting hardware included. Provide adequate backing in wall for support and comply to local codes for barrier free requirements.

Overall front to back: 8 5/8" (219 mm)

CM-16104Overall size of left to right is measured centre to centre.

CM-16104Washroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Paper towel dispenser for wall mounting, stainless steel, surface satin finished, material thickness 22 gauge, folded front cover, cylinder lock with Franke standard key, inspection windows on sides, loading capacity 500 - 800 pcs. of paper depending on convolution, incl. stainless steel screws and dowels.


RODX600

Technical daTa

Gross weight 2.6 kgNet weight 2.2 kgType of operation manual operation Type of mounting wall mounting Lock key-lock Filling quantity 800.00 towelsType of consumable paper towel

RODX600Washroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Touch free paper towel dispenser for wall mounting, stainless steel, surface satin finished, material thickness 22 gauge folded cover with cylinder lock and standard Franke key, infrared sensor activity for non-touch operation, integrated tear-off edge, needs 4 pcs. standard D 1.5 V batteries, maintenance free mechanic and easy paper roll change mechanism, for rolls with max. width 205 mm (8.07") and max. diameter 200 mm (7.87"), paper length adjustable to 200, 250 and 300 mm (7.87, 9.84" and 11.81"), incl. stainless steel screws and dowels.


RODX630

Technical daTa

Gross weight 6.2 kgNet weight 5.8 kgType of operation sensor operation Type of mounting wall mounting Lock key-lock Filling quantity 1.00 rollsType of consumable paper roll Maximum depth/diameter of consumable 8 11/16" (220 mm)Maximum width of consumable 8 1/16" (205 mm)Type of batteries D Mono battery 1.5 V Number of batteries 4




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Paper towel dispenser for recessed mounting, stainless steel, surface satin finished, material thickness 22 gauge, folded front cover, cylinder lock with Franke standard key, loading capacity 500 - 800 pcs. of paper depending on convolution, incl. stainless steel screws and dowels.


RODX600E

Technical daTa

Gross weight 2.4 kgNet weight 2.4 kgType of operation manual operation Type of mounting recessed mounting Lock key-lock Filling quantity 800.00 towelsType of consumable paper towel

RODX600EWashroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Paper towel dispenser for hidden mounting behind wall and mirror, stainless steel, surface satin finished, material thickness 22 gauge for 600 - 800 paper towels, depending on convolution, filling from bottom, incl. stainless steel screws and dowels.


RODX600ME

Technical daTa

Gross weight 4 kgNet weight 4 kgType of operation manual operation Type of mounting various types of mounting Lock no lock Filling quantity 800.00 towelsType of consumable paper towel Maximum depth/diameter of consumable 3 3/8" (85 mm)Maximum width of consumable 10 5/8" (270 mm)

RODX600MEWashroom Accessories

61562 | SPECIFICATIONS | REV. 14_MAY_2015 365www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Chrome soap dispenser manufactured from chromium plated brass. In-corporates a replaceable 1 litre polyethylene container for use with liquid soap


SD80Vstandard

Technical daTa

Type of soap container integrated refillable tank Type of operation manual operation Filling quantity 1.00 literType of consumable liquid soap

SD80V-EXTwith extension for "Murro" basin (or equivalent)

Technical daTa

Type of soap container integrated refillable tank Type of operation manual operation Filling quantity 1.00 literType of consumable liquid soap

ESD80BOTTLE1Replacement refillable tank Overall height: 12 3/16" (310 mm) Overall diameter: 3 1/8" (79 mm)

Technical daTa

Filling quantity 1.00 literType of consumable liquid soap Material type polyethylene

SD80V, SD80V-EXTWashroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Soap dispenser for wall mounting, stainless steel, surface satin finished, material thickness 20 gauge folded front cover, cylinder lock with Franke standard key, suitable for liquid soaps and lotions, 0.8 liter soap tank, lever to pull, incl. stainless steel screws and dowels.


RODX618

Technical daTa

Type of soap container integrated refillable tank Gross weight 2 kgNet weight 2 kgType of operation manual operation Type of mounting wall mounting Lock key-lock Filling quantity 800.00 mlType of consumable liquid soap




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Touch free soap dispenser for wall mounting, stainless steel, surface satin finished, material thickness 20 gauge folded front cover, cylinder lock with Franke standard key, infrared sensor activity for non-touch operation, LED-light shows battery status, needs 6 pcs. 1.5 V (=9 V) Alkaline AA batteries, suitable for liquid soaps and lotions, 800 ml soap tank, depending on soap between 0.6 and 1.1 ml is dispensed, incl. stainless steel screws and dowels.


RODX625

Technical daTa

Type of soap container integrated refillable tank Gross weight 1.7 kgNet weight 1.5 kgType of operation sensor operation Type of mounting wall mounting Lock key-lock Filling quantity 800.00 mlType of consumable liquid soap Type of batteries AA Mignon battery 1.5 V Number of batteries 6




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Soap dispenser for recessed mounting, stainless steel, surface satin finished, material thickness 20 gauge folded front cover, cylinder lock with Franke standard key, suitable for liquid soaps and lotions, 0.8 liter soap tank, lever to pull, incl. stainless steel screws and dowels.


RODX618E

Technical daTa

Type of soap container integrated refillable tank Gross weight 2.5 kgNet weight 2.5 kgType of operation manual operation Type of mounting recessed mounting Lock key-lock Filling quantity 800.00 mlType of consumable liquid soap




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Soap dispenser for wall mounting, stainless steel, surface satin finished, material thickness 20 gauge folded front cover, cylinder lock with Franke standard key, suitable for liquid soaps and lotions, 1 liter soap tank, push button on front, incl. stainless steel screws and dowels.


RODX619

Technical daTa

Type of soap container integrated refillable tank Gross weight 1.3 kgNet weight 1 kgType of operation manual operation Type of mounting wall mounting Lock key-lock Filling quantity 1.00 literType of consumable liquid soap




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Soap dispenser for recessed mounting, stainless steel, surface satin finished, material thickness 20 gauge folded front cover, cylinder lock with Franke standard key, suitable for liquid soaps and lotions, 1 liter soap tank, push button on front, incl. stainless steel screws and dowels.


RODX619E

Technical daTa

Type of soap container integrated refillable tank Gross weight 1.1 kgNet weight 1.1 kgType of operation manual operation Type of mounting recessed mounting Lock key-lock Filling quantity 1.00 literType of consumable liquid soap




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double toilet roll holder with spindle system for wall mounting, stainless steel, surface satin finished, material thickness 22 gauge folded front cover, cylinder lock with Franke standard key, for 2 rolls with max. Ø 120 mm (4.72"), second roll will be released after consumption of first roll, with spindles, reserve roll not visible, incl. stainless steel screws and dowels.


RODX672

Technical daTa

Gross weight 2.6 kgNet weight 2.6 kgType of mounting wall mounting Lock key-lock Filling quantity 2.00 rollsMaximum depth/diameter of consumable 4 1/2" (115 mm)Maximum width of consumable 4 1/2" (115 mm)Spindle yes




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Double toilet roll holder with spindle system for recessed mounting, stainless steel, surface satin finished, material thickness 22 gauge folded front cover, cylinder lock with Franke standard key, for 2 rolls with max. Ø 120 mm (4.72"), second roll will be released after consumption of first roll, reserve roll not visible, incl. stainless steel screws and dowels.


RODX672E

Technical daTa

Gross weight 2.7 kgNet weight 2.7 kgType of mounting recessed mounting Lock key-lock Filling quantity 2.00 rollsMaximum depth/diameter of consumable 4 1/2" (115 mm)Maximum width of consumable 4 1/2" (115 mm)Spindle yes




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Jumbo roll holder for wall mounting, stainless steel, surface satin finished, material thickness 0.9 mm, closed round casing with inspection window, paper withdrawal over two tear-off edges, locked with hexagonal allen screw, for 1 roll with max. Ø 350 mm, incl. stainless steel screws, dowels and hexagonal allen key.


CHRX670

Technical daTa

Gross weight 2.4 kgNet weight 1.9 kgType of mounting wall mounting Lock screw-lock Filling quantity 1.00 rollsMaximum depth/diameter of consumable 13 3/4" (350 mm)Maximum width of consumable 3 15/16" (100 mm)Spindle yes

CHRX670Washroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Sanitary towel and disposal bin for wall mounting, stainless steel, surface satin finished, material thickness 22 gauge folded front cover, approx. 3.7 liter capacity, removable plastic container inside, incl. stainless steel screws and dowels.


RODX611

Technical daTa

Gross weight 2.6 kgNet weight 2.2 kgType of mounting wall mounting Lock no lock Filling volume 3.700 literLid yes Bag clamp no




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Paper towel dispenser - waste bin combination for recessed mounting, stainless steel, surface satin finished, material thickness 22 gauge folded front cover, cylinder lock with Franke standard key, loading capacity 500 - 800 pcs. of paper depending on convolution, waste bin with approx. 23 liter capacity, incl. stainless steel screws and dowels.


RODX602E

Technical daTa

Gross weight 13.2 kgNet weight 12.5 kgType of mounting recessed mounting Combination part 1 paper towel dispenser Type of consumable 1 paper towel Filling quantity 1 800 piecesLock 1 key-lock Combination part 2 waste bin Filling quantity 2 23 literLock 2 key-lock




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Waste bin for wall mounting, stainless steel, surface satin finished, material thickness 22 gauge rounded edges, mounting either with mounting bracket or directly onto the wall, incl. stainless steel screws and dowels.


RODX605capacity: approx. 23 liter

Technical daTa

Gross weight 1 kgNet weight 1 kgType of mounting wall mounting Lock no lock Filling volume 23.000 literLid no Bag clamp no




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Waste bin for recessed mounting, stainless steel, surface satin finished, material thickness 22 gauge rounded edges, cylinder lock with Franke standard key, mounting with in-wall frame, incl. stainless steel screws and dowels.


RODX605Ecapacity: approx. 23 liter

Technical daTa

Gross weight 7.5 kgNet weight 7.5 kgType of mounting recessed mounting Lock key-lock Filling volume 23.000 literLid no Bag clamp no




Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Paper towel dispenser, waste bin combination for wall mounting, stainless steel, surface satin finished, material thickness 22 gauge folded front cover, cylinder lock with Franke standard key, loading capacity 500 - 800 pcs. of paper depending on convolution, waste bin with approx. 23 liter capacity, incl. stainless steel screws and dowels.


RODX602

Technical daTa

Gross weight 10 kgNet weight 10 kgType of mounting wall mounting Combination part 1 paper towel dispenser Type of consumable 1 paper towel Filling quantity 1 800 piecesLock 1 key-lock Combination part 2 waste bin Filling quantity 2 23 literLock 2 key-lock


61562 | SPECIFICATIONS | REV. 01_JAN_2015 390www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

One piece, 3/8" (9.53mm) x 1/2" (12.7mm) x 3/8" (9.53mm), type 430 BA stainless steel channel frame. Tightly mitered corners with unique concealed screw fixings to ensure easy field mirror replacement. No.1 quality, 5mm glass mirror, conforms to CGSB 12.5-86 Type 1B. Guar-anteed against silver spoilage for 10 years. Three way keyhole slots and theft resistant clips assure a secure and vandal resistant mounting. Mirrors can be installed horiztonally or vertically.

Overall front to back (depth): 1/2" (13 mm)

F850-1824

Technical daTa

Gross weight 5.4 kgType of mounting wall mountingOverall left to right: 18" (457 mm)Overall height: 24" (609 mm)

F850-1830

Technical daTa

Gross weight 6.8 kgType of mounting wall mountingOverall left to right: 18" (457 mm)Overall height: 30" (762mm)

F850-1836

Technical daTa


F850-2430

Technical daTa


F850-2436

Technical daTa


F850++Washroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Rigidly formed, 3/4" (19mm) x 5/8" (16mm), 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel angle frame with #4 satin finish. Mitered corners are heliarc welded, ground, and polished smooth. No.1 quality, 5mm glass mirror, conforms to CGSB 12.5-86 Type 1B. Guar-anteed against silver spoilage for 10 years. Wall hanger and mechanical fixings are concealed to assure a secure and vandal resistant wall mounting.

Overall front to back: 5/8" (16 mm)

F3200-1824

Technical daTa


F3200-1830

Technical daTa


F3200-1836

Technical daTa


F3200-2430

Technical daTa


F3200-2436

Technical daTa


F3200++Washroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

Rigidly formed, 18 gauge (1.2mm), type 304 (CNS 18/10) stainless steel angle frame with #4 satin finish. Mitered corners are heliarc welded, ground, and polished smooth. No.1 quality, 5mm glass mirror, conforms to CGSB 12.5-86 Type 1B. Guar-anteed against silver spoilage for 10 years. Wall hanger and mechanical fixings are concealed to assure a secure and vandal resistant wall mounting.

Overall front to back: 4" (102 mm)

F3200FT-1630

Technical daTa

Net weight 7.6 kgType of mounting wall mountingOverall left to right: 16" (406 mm) Overall height: 30" (762 mm)

F3200FT-1830

Technical daTa


F3200FT-1836

Technical daTa


F3200FT-2436

Technical daTa


F3200FT++Washroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS range paper towel dispenser for wall mounting, stainless steel with satin finish, black safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, capacity 300 - 400 pieces of Z-folded paper, includes mounting materials. Dimensions (W x H x D): 11 13/16 x 12 7/8 x 4 3/4" 300 x 326 x 120 mm

EXOS600B

Technical daTa

Net weight 5.10kg/11.24 lbs.Type of mounting wall mounting

EXOS600BWashroom Accessories



Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS range paper towel dispenser for wall mounting, stainless steel with satin finish, white safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, capacity 300 - 400 pieces of Z-folded paper, includes mounting materials. Dimensions (W x H x D): 11 13/16 x 12 7/8 x 4 3/4" 300 x 326 x 120 mm

EXOS600W

Technical daTa

Net weight 5.06 kg/11.15 lbs.Type of mounting wall mounting

EXOS600WWashroom Accessories

392-C61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS range paper towel dispenser for wall mounting, stainless steel with satin finish, front and casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, capacity 300 - 400 pieces of Z-folded paper, includes mounting materials. Dimensions (W x H x D): 11 13/16 x 12 7/8 x 4 3/4" 300 x 326 x 120 mm

EXOS600X

Technical daTa


EXOS600XWashroom Accessories

392-D61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS waste bin for wall mounting, stainless steel with satin finish, black safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), capacity approximate 30 litres, integrated bag holder, includes mounting bracket and mounting materials. Dimensions (W x H x D): 11 13/16 x 22 9/16 x 9 7/8" 300 x 572 x 250 mm

EXOS605B

Technical daTa



392-E61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS Waste bin for wall mounting, stainless steel with satin finish, white safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), capacity approximate 30 litres, integrated bag holder, includes mounting bracket and mounting materials. Dimensions (W x H x D): 11 13/16 x 22 9/16 x 9 7/8" 300 x 573 x 250 mm

EXOS605W

Technical daTa



392-F61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS waste bin for wall mounting, stainless steel with satin finish, front and casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), capacity approximate 30 litres, integrated bag holder, includes mounting bracket and mounting materials. Dimensions (W x H x D): 11 13/16 x 22 9/16 x 9 7/8" 300 x 573 x 250 mm

EXOS605X

Technical daTa



392-G61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS foam soap dispenser for wall mounting, stainless steel with satin finish, black safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, with stainless steel pull lever, suitable for Franke foam soap, includes mounting materials and 650 ml Franke foam soap. Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm

EXOS616B

Technical daTa



392-H61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS foam soap dispenser for wall mounting, stainless steel with satin finish, white safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, with stainless steel pull lever, suitable for Franke foam soap, includes mounting materials and 650 ml Franke foam soap.

Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm

EXOS616W

Technical daTa



392-I61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS foam soap dispenser for wall mounting, stainless steel with satin finish, front and casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, with stainless steel pull lever, suitable for Franke foam soap, includes mounting materials and 650 ml Franke foam soap.

Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm

EXOS616X

Technical daTa



392-J61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS soap dispenser for wall mounting, stainless steel with satin finish, black safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, suitable for liquid soap and lotions, 800 ml refill tank, with stainless steel push lever, easy to refill with soap tank on front panel, includes mounting materials. Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm

EXOS618B

Technical daTa



392-K61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS soap dispenser for wall mounting, stainless steel with satin finish, white safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, suitable for liquid soap and lotions, 800 ml refill tank, with stainless steel push lever, easy to refill with soap tank on front panel, includes mounting materials. Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm

EXOS618W

Technical daTa



392-L61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS soap dispenser for wall mounting, stainless steel with satin finish, front and casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, suitable for liquid soap and lotions, 800 ml refill tank, with stainless steel push lever, easy to refill with soap tank on front panel, includes mounting materials. Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm

EXOS618X

Technical daTa

Net weight 2.52 kg/5.55lbs.Type of mounting wall mounting


392-M61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS touch free soap dispenser for wall mounting, stainless steel with satin finish, black safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, infrared sensor activity for non-touch operation, LED display shows battery status, requires 4 pieces 1.5V AA batteries, suitable for liquid soap and lotions, includes 800 ml refill tank, dispenses 0.6 - 1.1 ml depending on soap, includes mounting materials. Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm

EXOS625B

Technical daTa

Net weight 2.78 kg/6.13 bs.Type of mounting wall mounting


392-N61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS touch free soap dispenser for wall mounting, stainless steel with satin finish, white safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, infrared sensor activity for non-touch operation, LED display shows battery status, requires 4 pieces 1.5V AA batteries, suitable for liquid soap and lotions, includes 800 ml refill tank, dispenses 0.6 - 1.1 ml depending on soap, includes mounting materials. Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm

EXOS625W

Technical daTa



392-O61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS touch free soap dispenser for wall mounting, stainless steel with satin finish, front and casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), inspection window on side, infrared sensor activity for non-touch operation, LED display shows battery status, requires 4 pieces 1.5V AA batteries, suitable for liquid soap and lotions, includes 800 ml refill tank, dispenses 0.6 - 1.1 ml depending on soap, includes mounting materials. Dimensions (W x H x D): 4 3/4 x 12 7/8 x 4 3/4" 120 x 326 x 120 mm

EXOS625X

Technical daTa



392-P61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS manual paper towel dispenser for wall mounting, stainless steel with satin finish, black safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), maximum roll width 205 mm, maximum roll diameter 200 mm, paper perforation length 260 mm, adjustable paper roll holder for optimized paper dispensing, includes mounting materials. Dimensions (W x H x D): 11 13/16 x 16 5/8 x 8 1/4" 300 x 423 x 210 mm

EXOS637B

Technical daTa



392-Q61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS manual paper towel dispenser for wall mounting, stainless steel with satin finish, white safety glass front panel, casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning character-istics (easy to clean), material thickness 18 gauge (1.2 mm), maximum roll width 205 mm, maximum roll diameter 200 mm, paper perforation length 260 mm, adjustable paper roll holder for optimized paper dispensing, includes mounting materials. Dimensions (W x H x D): 11 13/16 x 16 5/8 x 8 1/4" 300 x 423 x 210 mm

EXOS637W

Technical daTa



392-R61562 | SPECIFICATIONS | REV2016 www.franke-commercial.com


Project InformAtIon

Project Name

Item Reference

Location

Quote #

Faucet Model #

Drillings Required

Notes

EXOS manual paper towel dispenser for wall mounting, stainless steel with satin finish, front and casing with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristics (easy to clean), material thickness 18 gauge (1.2 mm), maximum roll width 205 mm, maximum roll diameter 200 mm, paper perforation length 260 mm, adjustable paper roll holder for optimized paper dispensing, includes mounting materials. Dimensions (W x H x D): 11 13/16 x 16 5/8 x 8 1/4" 300 x 423 x 210 mm

EXOS637X

Technical daTa





Model Page Model Page

1100 . .................................................................................................... 7100-1/302 . ........................................................................................ 7100-NR . .............................................................................................. 7125GOWK . ......................................................................................... 7125GWK . ............................................................................................ 7125GWK-MOD . ...................................................................................... 71047 . .................................................................................................. 71120/316 . ......................................................................................... 71130 . .................................................................................................. 71130/60 . ........................................................................................... 71140 ♦ . .............................................................................................. 71140/60 ♦ ......................................................................................... 71200/316G . ...................................................................................... 71300G . ............................................................................................... 7

2200/316 . ........................................................................................... 7200/316-NR . ..................................................................................... 7

3310-1 . ................................................................................................. 7312-1 . ................................................................................................. 7315-7 . ................................................................................................. 7315-8 . ................................................................................................. 7315-9 . ................................................................................................. 7315-9/316 . ........................................................................................ 73000T3370A .................................................................................. 2413001T3370A .................................................................................. 241

AACG-48 . .......................................................................................... 352ALBD1305P-1 . ............................................................................... 109ALBD1306P-1 . ............................................................................... 110ALBD4405P-1 . ............................................................................... 112ALBD4406P-1 . ............................................................................... 113ALBD6405-1 . ................................................................................. 104ALBD6405P-1 . ............................................................................... 116ALBD6406P-1 . ............................................................................... 117ALBD7505P-1 . ............................................................................... 120ALBD7506P-1 . ............................................................................... 121ALBDC182605P-1 . ........................................................................ 102ALBLRS7005P-1 . ........................................................................... 146ALBLRS7006P-1 . ........................................................................... 147ALBLS4605P-1 . ............................................................................. 132ALBLS4606P-1 . ............................................................................. 133ALBLS6406P-1 . ............................................................................. 135ALBLS7005P-1 . ............................................................................. 137ALBLS7006P-1 . ............................................................................. 138ALBRS4605P-1 . ............................................................................. 140ALBRS4606P-1 . ............................................................................. 141ALBRS7005P-1 . ............................................................................. 143ALBRS7006P-1 . ............................................................................. 144ALBS1305P-1 . ................................................................................. 49ALBS1306P-1 . ................................................................................. 50ALBS2705P-1 . ................................................................................. 52ALBS2706P-1 . ................................................................................. 53ALBS4005P-1 . ................................................................................. 63ALBS4006P-1 . ................................................................................. 64ALBS4405P-1 . ................................................................................. 55ALBS4406P-1 . ................................................................................. 56ALBS4605P-1 . ................................................................................. 59ALBS4606P-1 . ................................................................................. 60ALBS6105P-1 . ................................................................................. 76

ALBS6106P-1 . ................................................................................. 77ALBS6405-1 . .................................................................................... 39ALBS6405P-1 . ................................................................................. 68ALBS6406P-1 . ................................................................................. 69ALBS6805-1 . .................................................................................... 40ALBS6805/316P-1 . ....................................................................... 315ALBS6805P-1 . ................................................................................. 72ALBS6806P-1 . ................................................................................. 73ALBS7005P-1 . ................................................................................. 80ALBS7006P-1 . ................................................................................. 81ALBS7305P-1 . ................................................................................. 88ALBS7306P-1 . ................................................................................. 89ALBS7505P-1 . ................................................................................. 84ALBS7506P-1 . ................................................................................. 85ALBS7805P-1 . ................................................................................. 94ALBS7806P-1 . ................................................................................. 95ALBS9405P-1 . ................................................................................. 46ALBS9406P-1 . ................................................................................. 47ALHS4605P-1 . ............................................................................... 149ALHS4606P-1 . ............................................................................... 150ALHS6405P-1 . ............................................................................... 152ALHS6406P-1 . ............................................................................... 153ALHS7305P-1 . ............................................................................... 155ALHS7306P-1 . ............................................................................... 156ALHS8605P-1 . ............................................................................... 158ALHS8606P-1 . ............................................................................... 159ALRS4605P-1 . ............................................................................... 161ALRS4606P-1 . ............................................................................... 162ANMW0010 . ...............................................................................279-AANMW0011 . ...............................................................................279-BART36-1 . ........................................................................................ 164ART36-3C . ...................................................................................... 165ART36/316-1 . ............................................................................... 329ART36/316-3C . ............................................................................. 330ART48-1 . ........................................................................................ 164ART48-3C . ...................................................................................... 165ART48/316-1 . ............................................................................... 329ART48/316-3C . ............................................................................. 330ART60-1 . ........................................................................................ 164ART60-3C . ...................................................................................... 165ART60/316-1 . ............................................................................... 329ART60/316-3C . ............................................................................. 330AS6105P-1 . ...................................................................................... 26AWHB1414P-00 . ........................................................................... 243

CC621T . ............................................................................................ 242CH-01 . ............................................................................................ 351CH-02 . ............................................................................................ 351CHRX670 . ...................................................................................... 379CL-DB . ............................................................................................ 202CM-16104 . ..................................................................................... 358CMPX538 . ...................................................................................... 344CR-36 . ............................................................................................ 350CR-48 . ............................................................................................ 350CR-60 . ............................................................................................ 350CR-72 . ............................................................................................ 350CV-00 . ............................................................................................ 349CV-01 . ............................................................................................ 349CV-02 . ............................................................................................ 349

DD0814P-1 . ...................................................................................... 103D1906-1 . .......................................................................................... 98D6408-1 . .......................................................................................... 99




D6410/316PCB-1 . ........................................................................ 320D6410PCB-1 . ................................................................................. 101D8610-1 . ........................................................................................ 100DL2448-1 . ...................................................................................... 200DL2448-5 . ...................................................................................... 200

EESD80BOTTLE1 . ............................................................................ 365EXOS600B ...................................................................................392-AEXOS600W . ................................................................................392-BEXOS600X . ..................................................................................392-CEXOS605B ...................................................................................392-DEXOS605W . ................................................................................ 392-EEXOS605X . .................................................................................. 392-FEXOS616B ...................................................................................392-GEXOS616W . ................................................................................392-HEXOS616X . ................................................................................... 392-IEXOS618B .................................................................................... 392-JEXOS618W . ................................................................................392-KEXOS618X . .................................................................................. 392-LEXOS625B .................................................................................. 392-MEXOS625W . ................................................................................392-NEXOS625X . ..................................................................................392-OEXOS637B ................................................................................... 392-PEXOS637W . ................................................................................392-QEXOS637X . ..................................................................................392-R

FF850-1824 . .................................................................................... 390F850-1830 . .................................................................................... 390F850-1836 . .................................................................................... 390F850-2430 . .................................................................................... 390F850-2436 . .................................................................................... 390F3200-1824 . .................................................................................. 391F3200-1830 . .................................................................................. 391F3200-1836 . .................................................................................. 391F3200-2430 . .................................................................................. 391F3200-2436 . .................................................................................. 391F3200FT-1630 . .............................................................................. 392F3200FT-1830 . .............................................................................. 392F3200FT-1836 . .............................................................................. 392F3200FT-2436 . .............................................................................. 392FSS2210/316-1 . ........................................................................... 286FSS222210/316-1 . ....................................................................... 281FSSL223410/316-1 . ..................................................................... 284FSSO2210/316-1 . ......................................................................... 287FSSOL223410/316-1 . .................................................................. 282FSSOR223410/316-1 . .................................................................. 283FSSR223410/316-1 . .................................................................... 285FWHB1819-3 . ................................................................................ 275

HHDWC2414-FM-R . ......................................................................... 345HDWC2514-FM-T . .......................................................................... 347HWS0610P-3 . .............................................................................252-AHWS1414P-00 . .............................................................................. 245HWS1420P-00 . .............................................................................. 247HWS6810P-3 . .............................................................................252-BHWSS1518P-00 . ............................................................................ 251

LLBD0814P-1 . ................................................................................. 125LBD1308P-1 . ................................................................................. 111LBD4408P-1 . ................................................................................. 114LBD4410P-1 . ................................................................................. 115

LBD6407-1 . .................................................................................... 105LBD6408-1 . .................................................................................... 106LBD6408/316P-1 . ......................................................................... 322LBD6408P-1 . ................................................................................. 118LBD6410/316PCB-1 . .................................................................... 323LBD6410PCB-1 . ............................................................................. 119LBD6808-1 . .................................................................................... 107LBD7412P-1 . ................................................................................. 124LBD7508-1 . .................................................................................... 108LBD7508P-1 . ................................................................................. 122LBD7510P-1 . ................................................................................. 123LBDDBL6408P-1 . ........................................................................... 198LBDDBR6408P-1 . .......................................................................... 197LBLDC1737P-1 . .......................................................................... 165-FLBLDC1943P-1 . .......................................................................... 165-FLBLRS7008P-1 . ............................................................................. 148LBLS4608P-1 . ................................................................................ 134LBLS6408P-1 . ................................................................................ 136LBLS7008P-1 . ................................................................................ 139LBRDC1737P-1 . .......................................................................... 165-FLBRDC1943P-1 . .......................................................................... 165-FLBRS4608P-1 . ............................................................................... 142LBRS7008P-1 . ............................................................................... 145LBS1306-1 . ...................................................................................... 36LBS1308P-1 . .................................................................................... 51LBS2708-1 . ...................................................................................... 37LBS2708P-1 . .................................................................................... 54LBS4008P-1 . .................................................................................... 65LBS4010P-1 . .................................................................................... 66LBS4408P-1 . .................................................................................... 57LBS4410P-1 . .................................................................................... 58LBS4607-1 . ...................................................................................... 38LBS4607/316P-1 . ......................................................................... 309LBS4608P-1 . .................................................................................... 61LBS4610/316P-1 . ......................................................................... 311LBS4610/316PC-3 . ....................................................................... 312LBS4610P-1 . .................................................................................... 62LBS6108P-1 . .................................................................................... 78LBS6110P-1 . .................................................................................... 79LBS6407/316P-1 . ......................................................................... 313LBS6408P-1 . .................................................................................... 70LBS6410PCB-1 . ............................................................................... 71LBS6807-1 . ...................................................................................... 41LBS6807-2 . ...................................................................................... 41LBS6807/316P-1 . ......................................................................... 316LBS6808-1 . ...................................................................................... 42LBS6808-2 . ...................................................................................... 42LBS6808/316P-1 . ......................................................................... 317LBS6808P-1 . .................................................................................... 74LBS6810-1 . ...................................................................................... 43LBS6810/316P-1 . ......................................................................... 318LBS6810/316P-3 . ......................................................................... 319LBS6810P-1 . .................................................................................... 75LBS7008P-1 . .................................................................................... 82LBS7010P-1 . .................................................................................... 83LBS7308-1 . ...................................................................................... 44LBS7308P-1 . .................................................................................... 90LBS7310P-1 . .................................................................................... 91LBS7312P-1 . .................................................................................... 92LBS7314P-1 . .................................................................................... 93LBS7508-1 . ...................................................................................... 45LBS7508P-1 . .................................................................................... 86LBS7510P-1 . .................................................................................... 87LBS7808P-1 . .................................................................................... 96LBS8014P-1 . .................................................................................... 97




LBS9106-1 . ...................................................................................... 32LBS9106-3 . ...................................................................................... 33LBS9407-1 . ...................................................................................... 34LBS9407-3 . ...................................................................................... 35LBS9407-3 . ...................................................................................... 67LBS9407/316P-1 . ......................................................................... 306LBS9407/316P-3 . ......................................................................... 307LBS9408P-1 . .................................................................................... 48LBSDBL6408P-1 . ........................................................................... 194LBSDBL6810/316P-1 . .................................................................. 331LBSDBL6810P-1 . ........................................................................... 196LBSDBR6408P-1 . ........................................................................... 193LBSDBR6810/316P-1 . .................................................................. 332LBSDBR6810P-1 . ........................................................................... 195LBT6407CB-1 . ................................................................................ 128LBT6410PCB-1 . ............................................................................. 129LBT8610P-1 . .................................................................................. 131LHS4608P-1 . ................................................................................. 151LHS6408P-1 . ................................................................................. 154LHS7308P-1 . ................................................................................. 157LHS8608P-1 . ................................................................................. 160LRS4608P-1 . .................................................................................. 163

OOC6/316 . ....................................................................................... 333

QQC-1W-18P . ................................................................................... 355QC-1W-24P . ................................................................................... 355QC-1W-30P . ................................................................................... 355QC-1W-36P . ................................................................................... 355QC-1W-3030P . ............................................................................... 356QC-2W-2436P . ............................................................................... 357QC-2W-3030P . ............................................................................... 357

RR2570-MIXLF . ................................................................................ 241RC6/316 . ....................................................................................... 335RDL2436-1 . .............................................................................REV-215RDL2436L-1 . ...........................................................................REV-216RDL2436LR-1 . ........................................................................REV-217RDL2436R-1 . ..........................................................................REV-216RDL2448-1 . .............................................................................REV-215RDL2448L-1 . ...........................................................................REV-216RDL2448LR-1 . ........................................................................REV-217RDL2448R-1 . ..........................................................................REV-216RODX600 . ...................................................................................... 360RODX600E . .................................................................................... 362RODX600ME . ................................................................................. 363RODX602 . ...................................................................................... 389RODX602E . .................................................................................... 386RODX605 . ...................................................................................... 387RODX605E . .................................................................................... 388RODX611 . ...................................................................................... 385RODX618 . ...................................................................................... 368RODX618E . .................................................................................... 371RODX619 . ...................................................................................... 372RODX619E . .................................................................................... 373RODX625 . ...................................................................................... 369RODX630 . ...................................................................................... 361RODX672 . ...................................................................................... 377RODX672E . .................................................................................... 378RS14 . .............................................................................................. 294RSL2418-1 . .............................................................................REV-212RSL2418L-1 . ...........................................................................REV-213

RSL2418LR-1 . .........................................................................REV-214RSL2418R-1 . ...........................................................................REV-213RSL2424-1 . .............................................................................REV-212RSL2424L-1 . ...........................................................................REV-213RSL2424LR-1 . .........................................................................REV-214RSL2424R-1 . ...........................................................................REV-213RTL2454-1 . .............................................................................REV-218RTL2454L-1 . ...........................................................................REV-219RTL2454LR-1 . .........................................................................REV-220RTL2454R-1 . ...........................................................................REV-219RTL2472-1 . .............................................................................REV-218RTL2472L-1 . ...........................................................................REV-219RTL2472LR-1 . .........................................................................REV-220RTL2472R-1 . ...........................................................................REV-219

SS4206-1 . .......................................................................................... 20S6108P-1 . ........................................................................................ 27S6407/316P-1 . ............................................................................. 300S6408-1 . .......................................................................................... 21S6410/316PCB-1 . ......................................................................... 302S6410PCB-1 . ................................................................................... 25S6808-1 . .......................................................................................... 22S6808/316P-1 . ............................................................................. 303S6810-1 . .......................................................................................... 23S6810/316P-1 . ............................................................................. 304S6810/316P-3 . ............................................................................. 305S7308-1 . .......................................................................................... 24S7310P-1 . ........................................................................................ 28S7312P-1 . ........................................................................................ 29S7312P-2 . ........................................................................................ 29S7314P-1 . ........................................................................................ 30S8014P-1 . ........................................................................................ 31S9106-1 . .......................................................................................... 17S9106-3 . .......................................................................................... 18S9106/316P-1 . ............................................................................. 296S9106/316P-3 . ............................................................................. 297S9407-1 . .......................................................................................... 19S9407/316P-1 . ............................................................................. 298S9407/316P-3 . ............................................................................. 299SANW200 . ..................................................................................165-ASANW205 . ..................................................................................165-BSANW211 . ..................................................................................165-CSANW212 . ..................................................................................165-DSANW215 . .................................................................................. 165-ESD80V . ........................................................................................... 365SD80V-EXT . .................................................................................... 365SDL2436-1 . .............................................................................REV-206SDL2436L-1 . ...........................................................................REV-207SDL2436LR-1 . ........................................................................REV-208SDL2436R-1 . ..........................................................................REV-207SDL2448-1 . .............................................................................REV-206SDL2448L-1 . ...........................................................................REV-207SDL2448LR-1 . ........................................................................REV-208SDL2448R-1 . ..........................................................................REV-207SL2424-1 . ...................................................................................... 199SL2424-5 . ...................................................................................... 199SL2424/316-1 . ............................................................................. 328SL2424/316-5 . ............................................................................. 328SL2448-1 . ...................................................................................... 199SL2448-5 . ...................................................................................... 199SL2448/316-1 . ............................................................................. 328SL2448/316-5 . ............................................................................. 328SS9126 . ......................................................................................... 295SSL2418-1 . .............................................................................REV-203




SSL2418L-1 . ...........................................................................REV-204SSL2418LR-1 . .........................................................................REV-205SSL2418R-1 . ...........................................................................REV-204SSL2424-1 . .............................................................................REV-203SSL2424L-1 . ...........................................................................REV-204SSL2424LR-1 . .........................................................................REV-205SSL2424R-1 . ...........................................................................REV-204SSS1827 . ....................................................................................... 288SSS1827DDS . ................................................................................ 291SSS1827SDSL . .............................................................................. 290SSS1827SDSR . .............................................................................. 289SSU1-00 . .................................................................................REV-235SSU1-10 . .................................................................................REV-235SSU1-11 . .................................................................................REV-235SSU1-20 . .................................................................................REV-235SSU1-2016-00 . .............................................................................. 232SSU1-2020-00 . .............................................................................. 233SSU2-00 . .................................................................................REV-237SSU2-10 . .................................................................................REV-237SSU2-11 . .................................................................................REV-237SSU2-20 . .................................................................................REV-237SSU2-2040-00 . .............................................................................. 234SSU3-00 . .................................................................................REV-239SSU3-10 . .................................................................................REV-239SSU3-11 . .................................................................................REV-239SSU3-20 . .................................................................................REV-239SSU-BS . .......................................................................................... 244STL2454-1 . .............................................................................REV-209STL2454L-1 . ...........................................................................REV-210STL2454LR-1 . .........................................................................REV-211STL2454R-1 . ...........................................................................REV-210STL2472-1 . .............................................................................REV-209STL2472L-1 . ...........................................................................REV-210STL2472LR-1 . .........................................................................REV-211STL2472R-1 . ...........................................................................REV-210STRX692 . ....................................................................................... 353STRX694 . ....................................................................................... 354

TT6410PCB-1 . .................................................................................. 126T8610-1 . ........................................................................................ 127TL2454-1 . ...................................................................................... 201TL2454-5 . ...................................................................................... 201TL2472-1 . ...................................................................................... 201TL2472-5 . ...................................................................................... 201

UUCD6405P-1 . ................................................................................. 168UCD6408P-1 . ................................................................................. 169UCS4608/316P-1 . ........................................................................ 324UCS4610/316P-1 . ........................................................................ 325UCS6105P-1 . ..............................................................................169-AUCS6805P-1 . ................................................................................. 166UCS6808/316P-1 . ........................................................................ 326UCS6808P-1 . ................................................................................. 167UCS6810/316P-1 . ........................................................................ 327

WWDL2436-1 .............................................................................REV-224WDL2436L-1 ...........................................................................REV-225WDL2436LR-1 . .......................................................................REV-226WDL2436R-1 . .........................................................................REV-225WDL2448-1 .............................................................................REV-224WDL2448L-1 ...........................................................................REV-225WDL2448LR-1 . .......................................................................REV-226

WDL2448R-1 . .........................................................................REV-225WHB1616-3 . .................................................................................. 253WHB1617-3 . .................................................................................. 256WHB1617-6 . .................................................................................. 254WHB1617-7 . .................................................................................. 255WHB1617/316-3 . ......................................................................... 336WHB1819-3 . .................................................................................. 258WHB1819-6 . .................................................................................. 259WHB1819-7 . .................................................................................. 260WHB1819/316-3 . ......................................................................... 338WHB2221-7 . .................................................................................. 264WHB2221-8 . .................................................................................. 265WHB2221-RS . ................................................................................ 267WHB2221-UC . ............................................................................... 267WHB5222-7 . .................................................................................. 268WHB5222-PW ♦ . ............................................................................... 7WHBS181910-3 . ........................................................................... 262WHBS181910/316-3 . ................................................................... 342WSL2418-1 . ............................................................................REV-221WSL2418L-1 . ..........................................................................REV-222WSL2418LR-1 . ........................................................................REV-223WSL2418R-1 . ..........................................................................REV-222WSL2424-1 . ............................................................................REV-221WSL2424L-1 . ..........................................................................REV-222WSL2424LR-1 . ........................................................................REV-223WSL2424R-1 . ..........................................................................REV-222WSS6713 . ...................................................................................... 276WT310E-7 . ..................................................................................... 274WT400C-7 . ..................................................................................... 270WT400C-8 . ..................................................................................... 270WT500C-7 . ..................................................................................... 271WT500C-8 . ..................................................................................... 271WT600C-7 . ..................................................................................... 272WT600C-8 . ..................................................................................... 272WTL2454-1 . ................................................................................226-AWTL2454L-1 . ..............................................................................226-BWTL2454LR-1 . ............................................................................226-CWTL2454R-1 . ..............................................................................226-BWTL2472-1 . ................................................................................226-AWTL2472L-1 . ..............................................................................226-BWTL2472LR-1 . ............................................................................226-CWTL2472R-1 . ..............................................................................226-BWT-RS . ............................................................................................ 273WTS36-1 . ....................................................................................... 293WTS48-1 . ....................................................................................... 293WTS60-1 . ....................................................................................... 293WTS72-1 . ....................................................................................... 293WTS2025-1 . ................................................................................... 292WTS2031-1 . ................................................................................... 292WTS2036-1 . ................................................................................... 292WTS2048-1 . ................................................................................... 292WTS2060-1 . ................................................................................... 292WTS2072-1 . ................................................................................... 292WTS2096-1 . ................................................................................... 292



Shipping MinimumAll Franke COMMERCIAL products are eligible for prepaid shipping (minimum 800 lbs, total order requirement) and can be combined with other eligible FRANKE KINDRED CANADA products. Franke COMMERCIAL SYSTEMS are neither eligible for, nor considered in the calculation of Jumbo Discount.

Payment TermsOur payment terms are: 2% - 30 days, net 45. All prices and product specifications are subject to change without notice resulting from occasional changes to product design.

Returns PolicyAny returned goods must be accompanied by a Return Goods Authorization form which must be provided by the sales representative in your territory. If the goods are not defective, a 25% restocking fee will be assessed by our representative upon inspection. Custom made sinks are not returnable. Sinks with custom faucet hole drillings are not returnable. Products which are obsolete and not included in our current catalogue are non-returnable.

Procedure for Custom SinksRequests should be accompanied by a thoroughly completed copy of the check list as furnished in the Custom Sinks section. A sketch would be helpful in many cases. Job names and quantities must be provided.

A quote will be returned, based on the information you provide. An approval drawing will not be prepared until we receive a pur-chase order at which time we will prepare the drawing and return it for approval by the specifier. Allow up to 48 hours for generation of the drawing. Production will not proceed until Franke Commercial has received the signed approval drawing. Quality System Registration to ISO 9001 Environmental Management System ISO 14001 LEED StatementGreen-Buildings’ team of LEED® Accredit-ed Professionals have performed a benchmark analysis of Franke Commercial Systems' sinkware and determined that these products may:1. Improve Building Durability2. Reduce Demand for Raw Materials3. Improve Indoor Environmental Quality

Green-Buildings believes that several characteristics of Franke Commercial's sinkware are congruent with green building principles and, as such, these products may be considered applicable to high performance buildings and also may contribute meaningfully to green building projects that pursue a LEED® Certification.

For full details of your selected product, feel free to contact us for details.

ConDiTionS, PoLiCiES & PRoCEDuRES

APR 2016

Franke Kindred Canada Ltd. Commercial Systems 1000 Franke Kindred Road Midland, ON L4R 4K9 Tel 855-446-5663 Fax 866-227-3050 [email protected] www.franke-commercial.com

Changes in dimensions, construction and models reserved.Printed in Canada.

Effective February 1, 2016

specifications package updates (inserts for printed

Documents