specifications - masterspdf.masters.com.pl/powertip/ph480272t006-iaa02_004.pdf · 2015. 12. 11. ·...

TECH. CORP.

SPECIFICATIONS

CUSTOMER :

SAMPLE CODE : SH480272T006-IAA02

MASS PRODUCTION CODE : PH480272T006-IAA02

SAMPLE VERSION : 01

SPECIFICATIONS EDITION : 004

DRAWING NO. (Ver.) : LMD-PH480272T006-IAA02(Ver.003)

PACKAGING NO. (Ver.) : PKG- PH480272T006-IAA02(Ver.001)

Customer Approved

Date:

Approved Checked Designer

廖志豪 Rex Liao

張慶源 Yuan Chang

陳宗淇 Howard Chen

□ Preliminary specification for design input ■ Specification for sample approval

POWERTIP TECH. CORP. Headquarters: No.8, 6th Road, Taichung Industrial Park,

Taichung, Taiwan

台中市 407工業區六路 8號

TEL: 886-4-2355-8168

FAX: 886-4-2355-8166

E-mail: [email protected]

Http://www.powertip.com.tw

NO.PT-A-005-8

betty_chen機構部門、完整姓名、日期

PH480272T006-IAA02 Page2 SAMPLE Ver.01

SPEC Edi.004

History of Version Date

(mm / dd / yyyy) Ver. Edi. Description Page Design by

05/22/2014 01 001 New Drawing. - Howard

06/04/2014 01 002 Second Drawing

Disp pin internal connect to H Modify Frame Drawing

12 Appendix

Howard

07/15/2014 01 003 New Sample - Howard

05/26/2015 01 004 Modify Average Brightness

Add LED Life Time Add Rear View

6 9

Appendix Howard

Total: 27 Pages


SPEC Edi.004

Contents 1. SPECIFICATIONS 1.1 Features 1.2 Mechanical Specifications 1.3 Absolute Maximum Ratings 1.4 DC Electrical Characteristics 1.5 Optical Characteristics 1.6 Backlight Characteristics 2. MODULE STRUCTURE 2.1 Counter Drawing 2.2 Interface Pin Description 2.3 Timing Characteristics

3. QUALITY ASSURANCE SYSTEM 3.1 Quality Assurance Flow Chart 3.2 Inspection Specification

4. RELIABILITY TEST 4.1 Reliability Test Condition

5. PRECAUTION RELATING PRODUCT HANDLING 5.1 Safety 5.2 Handling 5.3 Storage 5.4 Terms of Warranty

Appendix：1. LCM Drawing

2. Packaging Specification

Note : For detailed information please refer to IC data sheet : Primacy(TFT LCD): Sitronix--ST7282-G4

(Or compatible IC )


SPEC Edi.004

1. SPECIFICATIONS 1.1 Features

Item Standard Value

Display Type 480 * 3 (RGB) * 272 Dots

LCD Type a-Si TFT , Normally white, Transmissive type

Screen size(inch) 4.3 inch

Viewing Direction 6 O’clock

Color configuration RGB-Strip

Backlight Type LED B/L

Interface Digital 24-bits RGB

Other(controller/driver IC) ST7282-G4

(Or Compatible IC )

ROHS THIS PRODUCT CONFORMS THE ROHS OF PTC

Detail information please refer website : http://www.powertip.com.tw/news.php?area_id_view=1085560481/

1.2 Mechanical Specifications

Item Standard Value Unit

Outline Dimension 105.5(W) x 67.2 (L) x 2.6(H) +0,-0.2 mm

LCD panel Item Standard Value Unit

Viewing Area 96.7 (W) * 55.3 (L) mm

Active Area 95.04 (W) x 53.856 (L) mm

Pixel Size 0.198 (W) * 0.198 (H) mm

Note : For detailed information please refer to LCM drawing


SPEC Edi.004

1.3 Absolute Maximum Ratings

Module Item Symbol Condition Min. Max. Unit

System Power Supply Voltage VDD GND=0 -0.3 4.6 V

Operating Temperature TOP - -20 70 °C

Storage Temperature TST - -30 80 °C

Storage Humidity HD Ta < 60 °C 10 90 %RH

1.4 DC Electrical Characteristics

Module GND = 0V, Ta = 25°C Item Symbol Condition Min. Typ. Max. Unit

Power Supply Voltage

VDD - 3.0 3.3 3.6 V

VGH 13 15 16 V

VGL -10 -10 -7 V

Input H/L Level Voltage VIH - 0.7VDD - VDD V

VIL - 0 - 0.3VDD V

Output H/L Level Voltage

VOH - VDD-0.4 - VDD V

VOL - 0 - GND+0.4 V

Supply Current IDD VDD = 3.3 V Pattern=Photo *1

- 25 40 mA

Note1:Maximum current display


SPEC Edi.004

1.5 Optical Characteristics TFT LCD Module VDD= 3.3 V, Ta=25°C

Item Symbol Condition Min. Typ. Max. unit -

Response time Tr+Tf 25℃ - - 30 - ms -

Viewing angle

Top θY+

CR ≥ 10

- 60 -

Deg. Note 4Bottom θY- - 60 -

Left θX- - 60 - Right θX+ - 60 -

Contrast ratio CR

Ta = 25°C θX , θY = 0

500 600 - - Note 3

Color of CIE Coordinate （With B/L）

White X 0.24 0.29 0.34

- Note1

Y 0.29 0.34 0.39

Red X 0.54 0.59 0.64 Y 0.29 0.34 0.39

Green X 0.28 0.33 0.38 Y 0.57 0.62 0.67

Blue X 0.10 0.15 0.20 Y 0.06 0.11 0.16

Average Brightness Pattern=white display

(With LCD)*1 IV IF= 20 mA 310 460 - cd/m2 Note1

Uniformity (With LCD)*2

△B IF= 20 mA 70 - - % Note1


SPEC Edi.004

Note 1: *1：△B=B(min) / B(max) * 100% *2：Measurement Condition for Optical Characteristics:

a：Environment: 25 ±℃ 5℃ / 60±20%R.H，no wind，dark room below 10 Lux at typical lamp current and typical operating frequency.

b：Measurement Distance: 500 ± 50 ㎜，(θ= 0°) c：Equipment: TOPCON BM-7 fast，(field 1°)，after 10 minutes operation.

d：The uncertainty of the C.I.E coordinate measurement ±0.01，Average Brightness ± 4%

To be measured at the center area of panel with a viewing cone of 1 by Topcon luminance meter BM-7, after 10 minutes operation (module) Note2: Definition of response time:

The output signals of photo detector are measured when the input signals are changed from “black” to “white”(falling time) and from “white” to “black”(rising time), respectively. The response time is defined as the time interval between the 10% and 90% of Amplitudes.

Refer to figure as below: Normally White

1 2 3

6 5 4

7 8 9

VIEW AREA

LCM

θθ

Colorimeter=BM-7 fast

500㎜

100%90%

10%0%

Signal (Relative value)

"Black"

Tr Tf

"White" "White"


SPEC Edi.004

Normally Black

Note3: Definition of contrast ratio:

Contrast ratio is calculated with the following formula Photo detector output when LCD is at “White” state

Contrast ratio (CR) = Photo detector output when LCD is at “Black” state

Note4: Definition of viewing angle:

Refer to figure as below:

θ X - = 90 °

θ Y - = 90 °

X -

Y -

θ Y + = 90 °

θ X + = 90 °

X +

θ Y - θ Y +

θ X -θ X +

Y +

θ X = θ Y = 0°

Φ

Φ = 0 °6 H

Φ = 270 °

Φ = 90 °

Φ = 180 °12H

100%90%

10%0%

Signal (R

elative value)

"Black"

Tr Tf

"White""Black"


SPEC Edi.004

1.6 Backlight Characteristics Maximum Ratings

Item Symbol Conditions Min. Max. Unit

LED Forward Current (Each LED)

IF Ta =25℃ - 30*1 mA

LED Reverse Voltage (Each LED)

VR Ta =25℃ - 5.0 V

Power Dissipation PD Ta =25℃ - 90*8 mW

Electrical / Optical Characteristics Item Symbol Conditions Min. Typ. Max. Unit

Forward Voltage VF

IF=20mA

- 25.6 - V

Average Brightness (Without LCD )

IV 6500 7800 - cd/m2

CIE Color Coordinate (Without LCD )

X - 0.28 - -

Y - 0.30 -

Color White

LED Lifetime 20000 Hrs at 25℃

B/L Internal Circuit Diagram:

A K


SPEC Edi.004

2. MODULE STRUCTURE 2.1 Counter Drawing

2.1.1 LCM Mechanical Diagram

* See Appendix

2.1.2 Block Diagram


SPEC Edi.004

2.2 Interface Pin Description

Pin No. Symbol Function

1 K Power supply for LED Backlight cathode input

2 A Power supply for LED Backlight anode input

3 GND Ground

4 VDD Digital power

5 R0 Red data bit 0

6 R1 Red data bit 1

7 R2 Red data bit 2

8 R3 Red data bit 3

9 R4 Red data bit 4

10 R5 Red data bit 5



13 G0 Green data bit 0









SPEC Edi.004

Pin No. Symbol Function

21 B0 Blue data bit 0








29 GND Ground

30 CLK Dot data clock

31 DISP Display control / standby mode selection “High” : Normal display

32 HSYNC Horizontal sync input

33 VSYNC Vertical sync input

34 DE Data input enable. Active High to enable the data input

35 N.C Not Connect.

36 GND Ground

37 XR Not Connect.

38 YB Not Connect.

39 XL Not Connect.

40 YT Not Connect.


SPEC Edi.004

2.3 Timing Characteristics

2.3.1Clock and Data Input Timing

2.3.2 SYNC-DE MODE


SPEC Edi.004


SPEC Edi.004

2.3.3Parallel RGB Input Timing Table


SPEC Edi.004

2.3.4 SYNC-DE Mode Timing


SPEC Edi.004

3. QUALITY ASSURANCE SYSTEM

3.1 Quality Assurance Flow Chart

Item Customer Sales R&D Q.A Manufactu

ring Product control

PurchaseInventory control

Marketing &

Design

Sample Approval

Pilot Run

& Mass

Product

Ship Out

OK

Request

Info Survey

Inquiry Project evaluation

Project Validation

Quote OK NG

Contract

Design check

Sample test

Verification

Sample approval

NG

NG

Pilot run & Reliability test

Verification

Specification preparation OK

Mass production

Inspection NGOK

Shipment

NG

Ship out

OK


SPEC Edi.004

Item Customer Sales R&D Q.A Manufact

uring Product control

PurchaseInventory

control

Sales Service

Q.A Activity

1. ISO 9001 Maintenance Activities 2. Process improvement proposal 3. Equipment calibration 4. Education And Training Activities 5. Standardization Management

Info Claim

Failure analysis

Corrective action

Tracking

Analysis report


SPEC Edi.004

3.2 Inspection Specification


SPEC Edi.004


SPEC Edi.004

4. RELIABILITY TEST

4.1 Reliability Test Condition (Ver.B01) NO. TEST ITEM TEST CONDITION

1 High Temperature Storage Test

Keep in +80 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs.

2 Low Temperature Storage Test

Keep in -30 ±2℃ 96 hrs Surrounding temperature, then storage at normal condition 4hrs.

3 High Temperature /

High Humidity Storage Test

Keep in +60 ℃ / 90% R.H duration for 96 hrs Surrounding temperature, then storage at normal condition 4hrs. (Excluding the polarizer)

4 Temperature Cycling Storage Test

-30℃ → +25℃ → +80℃ → +25℃ (30mins) (5mins) (30mins) (5mins)

10 Cycle Surrounding temperature, then storage at normal condition 4hrs.

5 ESD Test

Air Discharge: Apply 2 KV with 5 times Discharge for each polarity +/-

Contact Discharge: Apply 250 V with 5 times discharge for each polarity +/-

1. Temperature ambiance : 15℃∼35℃ 2. Humidity relative : 30%∼60% 3. Energy Storage Capacitance(Cs+Cd) : 150pF±10% 4. Discharge Resistance(Rd) : 330Ω±10% 5. Discharge, mode of operation : Single Discharge (time between successive discharges at least 1 sec) (Tolerance if the output voltage indication : ±5%)

6 Vibration Test (Packaged)

1. Sine wave 10∼55 Hz frequency (1 min/sweep) 2. The amplitude of vibration :1.5 mm 3. Each direction (X、Y、Z) duration for 2 Hrs

7 Drop Test (Packaged)

Drop Direction :※1 corner / 3 edges / 6 sides each 1time

Packing Weight (Kg) Drop Height (cm) 0 ~ 45.4 122 45.4 ~ 90.8 76 90.8 ~ 454 61 Over 454 46


SPEC Edi.004

5. PRECAUTION RELATING PRODUCT HANDLING 5.1 SAFETY

5.1.1 If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin. 5.1.2 If the liquid crystal touches your skin or clothes , please wash it off immediately by

using soap and water. 5.2 HANDLING

5.2.1 Avoid any strong mechanical shock which can break the glass. 5.2.2 Avoid static electricity which can damage the CMOS LSI—When working with the

module , be sure to ground your body and any electrical equipment you may be using. 5.2.3 Do not remove the panel or frame from the module.

5.2.4 The polarizing plate of the display is very fragile. So , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an HB pencil lead (glass , tweezers , etc.)

5.2.5 Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate.

5.2.6 Do not touch the display area with bare hands , this will stain the display area. 5.2.7 Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with

a cleaning naphtha solvent. 5.2.8 To control temperature and time of soldering is 320±10℃and 3-5 sec. 5.2.9 To avoid liquid (include organic solvent) stained on LCM .

5.3 STORAGE 5.3.1 Store the panel or module in a dark place where the temperature is 25℃ ±5℃

and the humidity is below 65% RH. 5.3.2 Do not place the module near organics solvents or corrosive gases.

5.3.3 Do not crush , shake , or jolt the module. 5.4 TERMS OF WARRANTY

5.4.1 Applicable warrant period The period is within thirteen months since the date of shipping out under normal using and storage conditions.

5.4.2 Unaccepted responsibility This product has been manufactured to your company’s specification as a part for use in your company’s general electronic products. It is guaranteed to perform according to delivery specifications. For any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required.

specifications - masterspdf.masters.com.pl/powertip/ph480272t006-iaa02_004.pdf · 2015. 12. 11. ·...

Documents