1. Product NameNyalic Clear Surface Protectant

2. Manufactured by HBI, Inc.114 Airport Business CourtJasper, GA 30143(770) 690-1480E-mail: sales@nyalic.comwww.nyalic.com

3. Product DescriptionBASIC USEManufactured by HBI, Inc., Nyalic® is a clear polymeric resin coating that protects against chemical and environmental corrosion on ferrous and non-ferrous metals, galvanized, anodized and powder coated surfaces, as well as restores oxidized painted surfaces. Designed to withstand extreme temperatures and UV rays, this surface protectant is ideal for highly moist or corrosive environments and performs at film thicknesses as low as 5 microns. Nyalic is effective for environments exposed to acids, salts,water, heavy snow, ice, sea air and lime. It can be applied by brush, roller or sprayer system or can be factory-applied by NFC professionals. Nyalic is proven for a range of interior and exterior surfaces:• Metal, including stainless steel, copper, bronze, aluminum• Anodized metals• Galvanized metals• Chromed metals• Polished, milled or brushed finishes• Painted surfaces• Noble metals• Exotic metals• Finished wood• Fiberglass or plastic• Electrical connections• Mechanical connectionsNyalic is suited for commercial and industrial applications. Its uses include:• Copper rainwater systems• Metal roofs

• Remains thermally stable and flexes with the metal surface to prevent cracking and peeling• Self-levels for easy repair• Reduces high maintenance costs caused by corrosion• Available in aerosol cans for on-site repair of scratched or damaged surfaceLIMITATIONS Solvent-based chemicals can damageNyalic-coated surfaces. Avoid using solvent-based cleaning solutions. Damaged surfaces can be repaired with Nyalic aerosol can.

4. Technical DataAPPLICABLE STANDARDSASTM International (ASTM)• ASTM B117 - Standard Practice for Operating Salt Spray (Fog) Apparatus• ASTM D1308 - Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes• ASTM D1735 - Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus• ASTM D2240 - Standard Test Method for Rubber Property - Durometer Hardness• ASTM D2794 - Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)• ASTM D3359 - Standard Test Methods for Measuring Adhesion by Tape Test

• Metal wall panels• Metal doors, windows and frames• Flashing• Exterior lighting• Decorative ironwork• Handrails• Fences• Wall cladding• Signs• Sculptures• HVAC units and air handlers• Escalators and elevatorsCOMPOSITION & MATERIALSNyalic is an ultra-thin proprietary formulation of polymeric resins.TYPES & SIZESStandard and anti-microbial formulas of Nyalic are offered in 1 gallon (3.79 L) containers and 12 oz (340 g) aerosol cans.COLORNyalic is clear.BENEFITS• Protects and seals metal surfaces to prevent corrosion and staining• Provides protection against chemicals, including acids and salts• Protects against salt water, sea air and harsh chemical cleansers• Resists ultraviolet rays• Protects against mildew• Remains clear - does not yellow• Resists dirt and repels water• Withstands temperatures up to 350 degrees F (177 degrees C) and under 0 degrees F (-18 degrees C)

©2011 NFC, Inc. All rights reserved. NYALIC is a registered trademark of HBI, Inc.

SPEC DATA

www.NYALIC.com

NFC, Inc.

• ASTM D4176 - Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)• ASTM G85 - Standard Practice for Modified Salt Spray (Fog) TestingPHYSICAL PROPERTIES• Thermally stable to 350 degrees F (177 degrees C)• Flexes with substrate under 0 degrees F (18 degrees C)• Dries clear• Acid-resistant• Salt-resistant• UV-resistant• Self-leveling• Protects against oxidation• Protects against moisture• Non-conductive• Coverage - 1 gallon (3.79 L) covers as much as 1200 ft2 (110 m2)Technical PropertiesSee Table 1.

5. InstallationPREPARATORY WORKAn NFC proprietary surface preparation product should be used to remove all surface contaminants prior to coating. Surface must be completely dry before application begins.METHODSNyalic can be applied by brush, roller orsprayer.

PRECAUTIONSUse a respirator when applying by sprayer; use gloves for other application methods. Apply in a well-ventilated work area.BUILDING CODESInstallation must comply with requirements of all applicable local, state and federal code jurisdictions. Good workmanship, coupled with proper

Table 1 PHYSICAL/TECHNICAL PROPERTIES

Test & Method Results

ASTM D4176 Appearance Clear; free from impurities ASTM D3359 Adhesion No peeling ASTM B117 Salt fog test; salt @ 95 degrees F (35 degrees C) Aluminum Passes 1000 hours Stainless Steel Passes 1000 hours ASTM D2794 1/2" Mandrel Bend Test Passes 180 degrees Direct and reverse impact @ 80 lb (36 kg) No peeling; no lifting ASTM D2240 Hardness Rated 2H ASTM D1308 Chemical resistance Passes - No discoloration; no blistering ASTM D1735 Humidity resistance Passes 1000 hours (100% RH@100F) ASTM G85 Prohesion Passes 2000 hours

Food Grade Letter of Certification Available

Anti-microbial Optional anti-microbial product

©2011 NFC, Inc. All rights reserved. NYALIC is a registered trademark of HBI, Inc.

SPEC DATA

www.NYALIC.com

detailing and design, ensure durable, functional and watertight construction.6. Availability & CostNyalic is only available directly from NFC. Contact NFC or an NFC licensed applicator for application information.7. WarrantyNyalic has a limited 5-year warranty. Contact NFC, Inc. for details.8. MaintenanceProperly installed Nyalic requires no special maintenance and resists dirt accumulation. To clean a surface, use NFC’s Right RinseTM and very light agitation with a soft bristle brush. Use of solvent-based cleaners will void the warranty. Scratches and abrasions can be field repaired using Nyalic in an aerosol can.9. Technical ServicesDetailed information, product literature, test results and assistance in preparing project specifications are available from NFC. Contact NFC, Inc. or visit the www.nyalic.com website.

NFC, Inc.