south african re context · pdf filecape peninsula university of technology ... they perform...
TRANSCRIPT
1
2
3
• South African RE Context
• SARETEC Overview
• Training Courses & Qualifications
• Collaboration
4
The Department of Energy’s (DoE) integrated resource planof 2010 (IRP2010) commits and authorizes the DoE to signpower purchase agreements (PPAs) for the procurement ofpower from renewable energy sources among others.
SARETEC is to be part of a long term solution for theprovision and development of RE skills training - to ensurethat SA maximizes the benefits and also mitigates the risksthat emanate from RE investment in SA.
5
Background
Integrated Resource Plan (2010) commits to 400MW/year to wind, 400MW/year to solar PV up to 2030 and 100MW/year to CSP up to 2025. These resources are considered the major focus areas for SA in RE, however other resources such as Bio-gas are being considered.
INTEGRATED RESOURCE PLAN FOR ELECTRICITY 2010-2030 Revision 2 FINAL REPORT
Green Economy Accord - signed in2011 by government, business andlabour.Goal: To create 300000 new jobs by 2020 - based on renewable energy generation, energy efficiency, bio-fuel production, manufacturing of equipment to support "green” projects, and natural resource conservation and rehabilitation.
8
SARETEC A national centre for training and education in renewable energy(RE), located at Cape Peninsula University of Technology (CPUT),Bellville campus .
9
SARETEC will deliver:• Specialised technician training• Tailored short courses• Workshops and conferences
SARETEC aims to:• Form partnerships locally and abroad• Support local and international sister centre’s • Assist in establishing RE higher qualifications• Facilitate Research
SARETEC has received:• Funding from Department of Higher Education and Training (DHET) via National Skills Fund (NSF)
• Site donation by CPUT, Bellville campus
• Organisational support: CPUT, GIZ, WCG (GreenCape), SANEDI, CIM & merSETA
• Considerable industry support! (Wind specifically)
10
SARETEC has academic collaboration with:
11
12
• To provide trained personnel for the RE industry
• To facilitate and accredit industry recognized
training and education for the RE industry in South
Africa
• To generate industry and South African accredited
qualifications for RE training and education
13
14
Located at the
Cape Peninsula University of Technology
Bellville Campus
15
SARETEC will showcase the use of renewable energy and energy
efficient design in a “green” building.
16
Ground Floor
Composite, Hydraulics and Solar/Electrical
labsTower (20m)
Classrooms
Lecture Theatre (100)
Student Centre
Workshop
Turbine Hall
Energy Management and
Marketing Display
17
Focus areas South Africa
• Wind • Solar PV & Thermal• Bio-gas• Micro-hydro
18
Main infrastructure need:
• Wind
• Solar
Long term development:
• Bio-gas
• Micro-hydro
April 2013 MoU Nordex/CPUT/GIZ
March 2013 Design brief
2012 Site on CPUT
May 2013 DHET Funding
May 2013 first Technician Training in Germany
June 2013 Member of SAWEA
May 2013 Nordex donated 2.5 MW Turbine
August 2013 Train the Trainer Training in Germany
February 2014 second Technician Training
September 2012 Study tour Germany
July 2015 Opening
June 2013 MoA UNI Stellenbosch
April 2013 Advisory Board
SARETEC Milestones
2014 Construction
• Wind Turbine Service Technician – QCTO process – NQF
5 - registration with SAQA expected April 2016.
• merSETA – QCTO – SAQA – Standards (SANS 61400)
• Solar Photovoltaic Service Technician – QCTO process –
NQF 5 - registration with SAQA
• RE Masters programme - CPUT RE Master Programme
Qualifications and programs
20
21
Dr Manfred Dutschke
General and Further Education and TrainingSub-Framework (GFETQSF) including the TVET NCV program (educational emphasis) NQF level 1 to 4
Quality assurance Occupational Qualifications Sub-Framework (OQSF) NQF level 1 to 6
Quality assurance for Occupational Qualifications Sub-Framework (OQSF) NQF level 5 to 10
Framework levelsThe NQF is organised as a series of levels of learning achievement, arranged in ascending order from one to ten. Each level on the NQF is described by a statement of learning achievement known as Level Descriptors.
Sub-FrameworksThe NQF is a single integrated system which comprises of three co-ordinatedqualifications Sub-Frameworks. These are:General and Further Education and Training Sub-Framework (GFETQSF)The Higher Education Qualifications Sub-Framework (HEQSF)The Occupational Qualifications Sub-Framework (OQSF)
http://www.saqa.org.za/
25
The Sub-Frameworks have qualifications registered at the following NQF levels:GFETQSF - levels 1 to 4;HEQSF - levels 5 to 10;OQSF - levels 1 to 6. For NQF levels 7 and 8 the Quality Council for Trades and Occupations can motivate for a qualification only in collaboration with a recognised professional body and the Council on Higher Education, in a process co-ordinated by SAQA.
requests development of occupational qualification/ curriculum
merSETA as the Quality Development Partner develops the curriculum
Supported the development process of Wind Turbine Service Technician and PV Solar Farm Service Technician Qualifications
Issues SAQA ID number and publishes the QCTO format qualifiction on their web page
SECTION 2: OCCUPATIONAL PROFILE
1. Occupational Purpose
The Photovoltaic (PV) Service Technician does a number of things to ensure optimum operation (power) generation of a solar installation.
They perform maintenance (preventative, scheduled, unscheduled) on PV systems
in compliance with Department of Energy and related regulations, isolate the PV system (in the case of a PV farm this is done with
authorisation obtained from the plant controller); perform fault finding (trouble-shooting), identify deficiencies; analyse information, carry out maintenance, repair (including removing and replacing components), and find solutions to a range of problems.
A Solar Photovoltaic Service Technician may be employed either at a photovoltaic farm or at stand-alone PV installations. Hence, there is the
1. Photovoltaic (PV) Service Technician (PV Farm)2. Photovoltaic (PV) Service Technician (Stand-Alone Installation).3. Photovoltaic Installer4. Photovoltaic Mounter
A Solar Photovoltaic Installer liaises with clients, conducts a site visit, obtains and analyses data, designs or customises or compiles a PV system, selects the appropriate components, installs, commissions and tests a PV system for functionality.
A Solar Photovoltaic Mounter mounts pre-designed PV systems according to instructions from either a PV Installer or PV Designer.
These four occupations are part qualifications within the Solar Photovoltaic Technician qualification. Each part qualification can be done independently of the others.
2. RATIONALEThe drive to harness and exploit renewable energy is gaining huge momentum in South Africa. A number of solar PV farms and roof-top installations have been installed across the country and these require Solar PV service technicians to maintain, service and repair them, if need be.This qualification will provide a number of employment opportunities to qualified electricians and non-electricians. The electricians will complete the qualification in a much shorter time since the qualification contains a large number of electrician-related competencies.Typical learners are school leavers and FET college graduates (all of whom must have mathematics). These PV service technicians will either be employed on solar PV farms or companies that install and maintain solar PV installations. Those with an entrepreneurial drive may establish their own businesses and create employment for others.The work of solar PV service technicians is critical to the economy through
the provision of services.
3. PURPOSEThe purpose of this qualification is to prepare a learner to operate as a Solar Photovoltaic Service TechnicianThe PV Service Technician does a number of things to ensure optimum operation (power) generation of asolar PV system. They perform maintenance (preventative, scheduled,
unscheduled) on PV systems; do fault finding (trouble-shooting), identify deficiencies and problems, analyse information, repair, remove and replace PV system components and find solutions to a range of problems.
The PV Service Technician will work either on solar PV farms or on roof-top installations; the latter is expected to become very significant and popular as South Africans realise the benefits of renewable energy and PV systems become more affordable. It must be noted that these two sites require slightly different competencies in the case of some components of a PV system like transformers and inverters. In addition, tracking systems in PV systems are gaining in popularity slowly and may be encountered by learners in some work environments. This qualification does provide for these differences in the PV environment.
A qualified learner will be able to:
Plan and prepare for maintaining, testing, diagnosing, repairing and replacing PV system electrical and mechanical components Inspect, test, diagnose, replace and maintain PV panels Inspect, test, diagnose, repair, replace and maintain inverters in PV systemsInspect, test, diagnose, replace and maintain batteries and charge controllers and repair charge controllers in PV systems Inspect, test, diagnose, repair, replace and maintain transformers in PV systems Inspect, test, diagnose, repair, replace and maintain cables, cable inter-connections, smart boxes, PV junction/string boxes, string diodes, connectors and fuses in PV systems Inspect, test, diagnose, repair, replace and maintain switchgear and control gear in PV systems
EXIT LEVEL OUTCOMES AND ASSOCIATED ASSESSMENT CRITERIA
Exit Level Outcome 1The ability to provide the correct answers to a range of questions formulated so as to assess factual, conceptual and procedural knowledge of: health and safety; electrical and electronic theory, components and principles of operation; power plant basics, power conditioning and control; protection systems, low voltage protection and lightning protection; PV systems, maintenance and troubleshooting of PV systems (20%)Exit Level Outcome 2
The ability to maintain, test, diagnose and replace PV panels (13%)Exit Level Outcome 3
The ability to maintain, test, diagnose and repair and replace inverters. (10%)
Exit Level Outcome 4The ability to maintain, test, diagnose and repair and replace transformers.
(5%)Exit Level Outcome 5
The ability to Inspect, test, diagnose, maintain and replace batteries in PV systems (13%)
Exit Level Outcome 6The ability to maintain, test, diagnose and replace cables, cable inter-connections, smart boxes, PV junction/string boxes, string diodes, connectors and fuses. (13%)
Exit Level Outcome 7The ability to maintain, test, diagnose and repair or replace charge
controllers. (13%)Exit Level Outcome 8
The ability to maintain, test, diagnose, repair and replace switchgear and control gear. (13%)
Knowledge Modules 126 Practical Skill Modules 91 Work Experience Modules 91
Knowledge Modules
Practical Skill Modules
Work Experience Modules
Will provide for the PV Solar Farm Technician QCTO format Training in co-operation with IPP‘s and ESKOM