solutions for ami systems - circutordocs.circutor.com/docs/cat_prime_2016_en.pdf · 2017. 6. 9. ·...

PRIME

Technology for energy efficiency

Solutions for AMI systems

2

PRIME © 2016 CIRCUTOR, SA — circutor.com — [email protected]

TelemanagementMost utility distribution companies have developed and implemented modernisation plans for their distribution lines, with the aim of improving energy efficiency.

In some countries, these improvements are prompted by regulations that make it compulsory to provide a more intelligent network, covering such areas as power generation control, improvements to the distribution lines, remote metering and remote control of transformer substations or the installation of smart meters.

A whole range of new possibilities has emerged in the area of smart metering that were completely unimaginable with traditional mechanical meters. The communications system offers benefitsin PLC (Power Line Carrier) communication over the electrical network, at an optimised cost. Some of the most notable features of these meters with telemanagement are that they allow you remotely connect and disconnect power, obtain consumption load profiles, remotely read meters in real time and record network quality parameters.

In addition to the smart meters that communicate over the electrical network, the main component of a system with this type of communication is the concentrator. This is a key component for the management of the entire network of meters, connected to a distribution transformer. The concentrator is responsible for communicating with both the meters and the central services that receive all of the data from each of the distribution company’s concentrators.

To ensure interoperability between the different actors and existing applications, it is preferable to use open and public standards, such as those established by PRIME Alliance.

PRIME promotes a public, open system with a non-proprietary telecommunications architecture, that will shape new AMM features and enable the construction of the new power grids of the future, i.e. the Smart Grids.

PRIME is based on OFDM multiplexing on the CENELEC-A band. The ultimate goal of PRIME is to establish a full range of international standards that ensure interoperability between the equipment and systems of different manufacturers.

PoweRline Intelligent Metering Evolution

3


Benefits of the system

Telemanagement system

1. Billing processThe telemanagement system with PRIME PLC communications enables the meter reading process to be controlled automatically, thus eliminating reading errors and reducing the costs associated with managing meters.

2. Demand managementFrom the information received from the meters, the concentrator allows you to create an accurate prediction of the energy demand in different time slots. This facilitates the management of the generation capacity of power distribution companies.

3. Technical managementTo facilitate the technical maintenance of installations, the system offers a number of features, including the efficient control of technical losses and fraud-related (non-technical) losses, the remote connection and disconnection of the end user’s power supply, the option to perform a remote technical analysis of any user’s electrical parameters - without the need for any physical intervention - and the remote configuration of each customer’s contracted power. At the same time, it allows you to obtain power quality data at each measuring point.

4. Complex tariff systemThis latest generation of meters is capable of controlling flexible tariffs, which measure power consumption in different periods. This allows power distribution companies to design domestic contracts that will apply tariffs based on the actual cost of the energy, allowing each customer’s tariff to be remotely adjusted according to the needs of the market.

PLC coms

Ethernet

Compact DC

CIRWATT B200RCPSingle-phase meter

COMPACT DC Series

CIRWATT B410RCPThree-phase meter

4


Purpose of a PLC concentratorThe main purpose of a PLC concentrator is to read the energy meters over the electrical network and export that data to one or more computer systems that are responsible for managing concentrators or, failing that, meters. The ability to send the same data collected by the concentrator to different systems results in faster billing, for example, as the measurements are obtained instantly.

Not only power distribution companies and operators of distribution lines can optimise their procedures. Energy suppliers, energy service companies and even customers themselves can benefit from obtaining their consumption data, because the system allows them to know their consumption habits and optimise their tariff or contracted power.

The new needs of the market, in terms of features and functionalities, have led CIRCUTOR to develop the third generation of PRIME concentrators, the COMPACT DC range.

Compact concentrator for telemanagement

Concentrator

COMPACT DC Serie

5


Functionalities and features of COMPACT DCThe COMPACT DC concentrator is normally installed in the transformer substation, by mounting it on a DIN rail and connecting it to the low voltage winding of the three-phase system. This allows the meters to be remotely managed through PLC communications, using the protocol standardised by PRIME Alliance. All of the information recorded by the meters is obtained using PLC. This information includes the load profiles, daily or monthly summaries of consumption and even quality parameters and any events that have occurred at the measuring point. As well as obtaining the readings, the concentrator allows you to manage the meter, either by changing the scheduled tariff or operating the circuit breaker to configure a new contracted power or disconnecting or reconnecting the power supply.

DesignCOMPACT DC, the latest generation of PRIME PLC concentrators, offers a design with smaller dimensions, making it suitable for most cabinets on the market, and new features such as a built-in dual-SIM 3G modem with 4 digital inputs. Another notable feature is that this is a compact solution in a single unit; telemanagement in distribution centres with two transformers, or for dual voltage transformers (COMPACT DC 2 dual concentrator). A 10 kV internal overvoltage protection device has been included in the Ethernet port of all COMPACT DC models, providing protection for 1 minute. In terms of the design of the enclosure, the COMPACT DC concentrator has a DIN rail attachment and a complete LED light indicator system on the front which provides quick and complete visual information about the overall operation of the concentrator. The electrical connection is at the bottom, using standard removable terminals, thus facilitating integration within the enclosure, both in terms of securing the unit and accessing the wiring and routing the wires to conduits, terminals or circuit breakers.

LV Supervision systemThe implementation of a telemanagement system allows you to find out information at the supply end and to interact with the measuring device. In this context of remote measurement and management of the grid, we must not forget the transformer substation itself, which does not normally have measurement systems that offer visibility regarding the transit of energy through the distribution transformer, the highest point of LV distribution lines.

COMPACT DC concentrators have built-in units that monitor all of the distribution lines, this is called the LV Supervision System. This measurement module is a three-phase meter, which measures forward voltage and current through current transformers. This

monitoring functionality provides a large amount of information to the company that operates the grid, as well as controlling and monitoring the LV network. Some of the most notable features of the LV Supervision System are:

– Energy balances (obtaining technical and non-technical loss rates)

– Control of the load level of each transformer phase. – Preventive monitoring of the network. This allows

any problems in the network to be detected before they affect and are reported by customers.

– MV parameters calculated.

6


PLC CommunicationsIn terms of PLC communications, the concentrator has a passive three-phase injection system, that injects the maximum power permitted by standard EN 50065, by all 3 phases at once. In addition to the three-phase injection, the concentrator can be configured, via the web, to inject through one of the 3 phases. This is used in cases where one of the phases interferes with the communications of the other phases.

ModelsThe PRIME COMPACT DC range of concentrators is available in different models, depending on the needs of each installation. The most basic model is the COMPACT DC SBT which, as well as featuring the PLC concentrator, includes the LV supervision system. In addition to the supervision system, the COMPACT DC 3G concentrator comes with a built-in 3G modem. If the concentrator needs to monitor any signals or external indicators, such as floor or fire detectors, door open sensors or MV isolator status sensors, the most suitable model is the COMPACT DC 4I concentrator, which, in addition to the LV supervision system, comes with a module that has four 10 kV digital inputs

with 1-minute insulation. In transformer substations where there is no need to monitor the network with a LV supervision system and a small-sized unit is required, the COMPACT DC BASIC model is the most suitable concentrator, which as well as offering concentrator functionality, includes a 3G modem. The most complete concentrator model is the COMPACT DC 2. This concentrator is the unit for transformer substations with two transformers, as it offers two fully insulated PLC injection systems, two LV supervision systems to monitor each three-phase network and a module with 4 digital inputs.

Like its previous versions, the COMPACT DC is used to provide communication with energy meters with PRIME technology, designed for measuring in LV networks and exporting the information obtained by PLC to the utility company’s higher reading and billing systems.

The COMPACT DC is normally installed on the transformer substation, whether indoors or outdoors, connected to the three-phase system’s LV winding.

Whoever operates the network, normally the power distribution company, will manage the entire network of concentrators and, at the same time, through these, all of the meters connected to each of the LV networks. Communication with the meters and concentrators is two-way, because the concentrator or network operator sends requests to the meters and the meters send automatic records to the concentrator and the central services.

Applications

PLC coms

Ethernet

Compact DC

CIRWATT B200RCPSingle-phase meter

COMPACT DC Series


7


Power supply circuit Rated voltage 88...276 Vac

Frequency 50/60 Hz

Consumption Compact DC 3G 10... 26 VA

Compact DC 4I 12... 27 VA

Compact DC SBT 7... 20 VA

Compact DC Basic 10... 26 VA

Compact DC 2 11... 19 VA

Installation category CAT III 300 V

PLC coupling circuit Rated voltage 127/220...230/400 Vac ±20%

Frequency 45...65 Hz

Modulation OFDM (PRIME)

Band CENELC A

Embedded PC Microprocessor 600 MHz

Memory Flash: 256 MB, SDRAM 128 MB

Consumption < 2.5 W

Communications port 1x Ethernet 10/100 Mbit, insulated 10 kV for 1 minute

Operating system Linux 3.14

LV Supervision system Voltage measurement margin 127/220...230/400 Vac ±20%

Nominal current (In) .../5 A

Installation category CAT III 600 V

Frequency measurement margin 45...65 Hz

Active energy measurement Class 1

Reactive energy measurement Class 2

Impulse LEDs 1 impulse LED for active energy: 20000 imp/kWh1 impulse LED for reactive energy: 20000 imp/kVArh

3G modem (Compact DC 3G model)

Type Quad band HSPA + HSPA/UMTS 850/900/1900/2100 MHz

Maximum output power UMTS/3G (Power class 3): 24 dBm

SIM Mini-SIM with dual bay

Antenna SMA female connector

Digital inputs (Compact DC 4I model)

No. inputs 4

Type Short-circuit (Vout max 12.5 V, Imax 15 mA)

Insulation 10 kV for 1 minute

Build features Enclosure material Self-extinguishing V0 plastic

Protection degree IP 41

Dimensions Compact DC 3G 203 x 199.5 x 130 mm

Compact DC 4I 203 x 199.5 x 130 mm

Compact DC SBT 165 x 119.5 x 130 mm

Weight Compact DC 3G 1.08 kg

Compact DC 4I 1.08 kg

Compact DC SBT 0.865 kg

Compact DC Basic 0.865 kg

Compact DC 2 1.510 kg

Minimum cross-section of the cables Voltage and power measurement:1 mm2

Secondaries of the current transformers: 2.5 mm2

Standards UNE-EN 61000-4-2:2010, UNE-EN 61000-4-3:2007, UNE-EN 61000-4-4:2013, UNE-EN 61000-4-5:2007, UNE-EN 62052-11:2004, IEC 61010:2010.

Type Code Dimensions (mm) LV Supervision system

3G Modem Inputs Connection 2nd transf.

Compact DC 3G Q46010 203x120x130 • • - -

Compact DC 4I Q46020 203x120x130 • - 4 digital inputs insulated 10 kV/1 min

-

Compact DC SBT Q46030 165x120x130 • - - -

Compact DC Basic

Q46040 165x120x130 - • --

Compact DC 2 Q46050 279x120x130 2 - 4 digital inputs insulated 10 kV/1 min

•

References

Technical features

8

B200RCP / B410RCP


Energy meters for residential applications

Type 5 metersResidential meters make up the bulk of the systems that have to be controlled by power distribution companies. The PRIME system provides a more effective solution for the telemanagement of this kind of meter.

residential meters

9


CIRCUTOR has developed both the single-phase and three-phase meter with PRIME communications, for residential power supplies below 15 kW.

The main features of these types of systems are as follows:

– Measurement of active and reactive energy, with the ability to distinguish between energy consumed and generated (4 quadrants).

– It remotely collects information about energy consumption, eliminating the errors associated with manual readings and eradicating the need to make estimates.

– Inclusion of a circuit breaker with two main functions. Thanks to the first function, the utility company can remotely disconnect and reconnect the power supply of any customer. The second is used for power limitation, allowing the contracted power to be configured in each meter. When the power consumed exceeds this value, the meter itself will disconnect the electric supply. To restore it, it will be necessary to perform a safety operation, which consists of opening the main switch, at which point the meter instantly detects that the circuit is open and restores the supply.

– The unit has an internal memory that allows a load curve to be logged, storing up to three months, at an hourly rate. This information allows the utility company to know the consumption habits and adapt its generation capacity to the actual demand.

Applications

Single-phase B200RCP Three-phase B410RCP

Power supply circuit Rated voltage 230 Vac 3 x 230 / 230/400 Vac*

Consumption < 2 W ; < 10 V·A < 2 W ; < 10 V·A

Frequency 50 Hz 50 Hz*

Current measurement

Nominal current 10 A 10 A

Maximum current 60 A 100 A

Accuracy class Active energy EN 50470 - Class B / IEC 62053-21 (Class 1)

Reactive energy IEC 62053-23 - Class 2

Clock Accuracy (EN 61038) < 0.5 sec/day at 23 ºC

Cutoff relay Type Two-pole Three-pole

Code Type Description

QB3C0 212-ES4A-B0B-17 Single-phase meter, with circuit breaker

QB3C3 212-ES4A-BFB-17 Single-phase meter, with circuit breaker and tariff indicator relay

QB4M0 410-QD1A-B0B-12 Three-phase meter with circuit breaker

QB4M1 410-QD1A-B3B-12 Thee-phase meter, with circuit breaker and tariff indicator relay

* Contact us for other models.

Models

Technical features

10

B410DP / B410TP


This PRIME telemanagement system provided by CIRCUTOR not only offers a robust solution for residential meter management, it also enables the integration of industrial direct and indirect measurement meters for low voltage supplies above 15 kW.

Type 3 and 4 meters

industrial meters

Energy meters for industrial applications and SMEs

11


ApplicationsAlthough telemanagement systems were originally created to deliver effective reading and management of residential meters, it is to be expected that during the second phase, or even in the initial project, one of the objectives set was to take advantage of all of the resources that had already been deployed to integrate the industrial meters connected to the same low voltage network.

CIRCUTOR has integrated PRIME communications into the direct and indirect measurement three-phase energy meters. By including these customers, complete telemanagement of all supplies connected to a transformer substation is provided. This way a more complete energy balance is achieved, because you not only have readings from residential meters, but also from industrial meters, meaning that more accurate information about technical and non-technical losses can be obtained.

Technical features


QB4N0 410-QD1A-B0B10 Direct measurement

QB8I0 410-QT5A-B0B10 Indirect measurement

Three-phase B410DP Three-phase B410TP

Power supply circuit Rated voltage 3 x 230 / 400 Vac 3 x 127/220 V / 3 x 230/400 Vac*

Consumption < 2 W ; < 10 V·A < 2 W ; < 10 V·A

Frequency 50 Hz 50 Hz*

Current measurement

Nominal current 10 A 5 A

Maximum current 100 A 10 A

Accuracy class Active energy EN 50470 - Class B / IEC 62053-21 (Class 1)

Reactive energy IEC 62053-23 - Class 2

Clock Accuracy (EN 61038) < 0.5 sec/day at 23 ºC

Battery Type Lithium

Service life > 20 years at 30 ºC

Models

* Contact us for other models.

12


System accessories CIRCUTOR has a complete range of accessories, ranging from the current transformers used in industrial indirect measurement meters, overvoltage protection that optimises the service life of our equipment, protecting it against electrical disturbances, components with 3G modems that allow our concentrators to be integrated into communications networks, the SoftWatt PRIME parameterisation software which can be used to configure meters and the optical head for local reading and downloading from the units.

SoftWatt PRIME software is an application designed for utilities and power distribution companies that allows all of the tariffing, measuring and communications parameters of the meters to be configured with the PRIME protocol. SoftWatt PRIME is compatible with all PRIME units, whether single-phase or three-phase. Among other features, the application includes:

— Configuration of contracts, public holidays and contracted power

— Configuration of the circuit breaker and the display view. — Downloading of load curves, events and energy closes. — Configuration of transformation ratios in indirect units. — Power quality parameters.

Accessories for the telemanagement system

SoftWatt

13


The PSM-PLC family of overvoltage protection devices includes a complete range of compact type-2 transient overvoltage protection devices with replaceable cartridges. It is especially designed to provide full and effective protection against transient overvoltages in the electrical network and particularly for networks with PLC communication. Adequate protection is achieved through staging; adapting the levels of protection to the part of the device where they are installed and to the systems inside it. These protection devices have a built-in

Overvoltage protection

3G / GPRS modem router

Current transformers

LOC optical reader


P437635000000 PSM20/400 2-pole overvoltage protection device.

P432785000000 PSM40/400 4-pole overvoltage protection device.


Q30230 SGE-3G/GPRS modem router GPRS-3G modem router with Ethernet communication

Models

CIRCUTOR provides a number of versions in its range of low voltage current transformers, depending on the requirements of the power distribution company.

The standard transformers used for official measurements are the TRMC 210 and TRMC 400, 10 VA and 0.5S (or 0.5) class. CIRCUTOR has also developed the same range of transformers but with less power (2.5 V·A), guaranteeing the same accuracy but at a far more competitive price.

CIRCUTOR has an optical head which is an essential accessory for the local reading or configuration of PRIME meters. CIRCUTOR has two different models, depending on the type of communication interface, whether RS-232 or USB.

ModelsQ30301 LOC RS-232 optical readerQ30302 LOC-USB USB optical reader

dynamic isolator, to isolate the protection element from the network when it ceases to be effective. The PSM-PLC range is composed of class II protection devices, with various discharge capacities: 20 kA and 40 kA, with an 8/20 µs curve. This protection device can be installed in the telemanagement cabinets, where the concentrators and wireless communication components will be located, to protect both their power supply and the concentrator's three-phase coupling.

SGE-3G is the CIRCUTOR modem router. It is designed to communicate with PRIME concentrators and meters via the Ethernet ports, RS-232 and RS-485. The modem's main feature is that it is able to communicate with EDGE / HSDPA (High Speed Downlink Packet Access), as well as enabling the connection to be configured with either a static or dynamic IP (through DynDNS services). All SGE-3G modem configuration is performed on its web site.

CIRCUTOR also offers an alternative solution to the transformers currently available, the new, more compact TRMC-X3 range (2.5 VA and 0.5S class), with indoor and outdoor installation models, in which the three current measurement transformers are arranged on a single mechanical support at a more cost-effective price, offering easy assembly and optimising performance. All while maintaining the accurate measurements which are characteristic of these devices.

* See models in specific catalogue.

14


Cabinets for TS telemanagement

CIRCUTOR provides a complete solution for telemanagement in transformer substations. The cabinets contain two elements that are necessary for performing remote measuring and management of the concentrator and meters connected to it. They also include protection and measurement components that make the cabinet robust and reliable.

Compact solutions for indoor TS

15


Cabinets with PRIME telemanagementThe CMBT PRIME COMPACT CT range are indoor cabinets containing different models of concentrators from the Compact DC range, all with the Low Voltage Supervision System included. The possibility of selecting different models of the compact DC concentrator allows us to add further features such as 3G remote communication through an integrated internal modem, alarm status through digital inputs or measurements from meters installed on two transformers on separate lines. All models include protection against transient overvoltages, two-pole or three-pole, a disconnectable test terminal block for measurements and thermal magnetic protection.

The cabinet is available in polyester with a cover (also suitable for outdoors) or in double-insulated enclosures with transparent and hinged covers.

CMBT PRIME COMPACT CT components — Compact DC PRIME concentrator. — LV supervision system meter (integrated into the concentrator). — Overvoltage protection devices. — Disconnectable test terminal block with 10 elements. — 2 and 4-pole circuit breakers. — 3G modem (depending on model). — 4 digital inputs for alarms or statuses (depending on model). — Connections second transformer (depending on model).

Code Type Enclosure Modem Concentrator Dimensions

Q5CD43 CMBT PRIME COMPACT CT 6 Polyester 3G COMPACT DC 3G 500x500x300

Q5BD43 CMBT PRIME COMPACT CT 6A Double-insulated 3G COMPACT DC 3G 810x270x170

Q5CB40 CMBT PRIME COMPACT CT 7 Polyester - COMPACT DC SBT 500x500x300

Q5BB40 CMBT PRIME COMPACT CT 7A Double-insulated - COMPACT DC SBT 810x270x170

Q5DE50 CMBT PRIME COMPACT CT 8 Polyester - COMPACT DC 2 750x500x300

Q5DE51 CMBT PRIME COMPACT CT 9 Polyester SGE-3G / GPRS

COMPACT DC 2 750x500x300

Models

16


Compact Solutions for outdoor TS

Cabinets for TP telemanagement

CIRCUTOR has also developed as robust solution for the telemanagement of pole-mounted transformers.

Similar solutions are integrated for outdoor cabinets as they are for the indoor version, but with the option of adding an enclosure that includes the measurement transformers, either for the TC 8.3 individual model or the compact TRMC-X3 three-phase solution. A load-break switch can also be included.

17


The CMBT PRIME COMPACT PT range consists of outdoor cabinets with built-in Compact DC concentrators and low voltage supervision modules. They also give you the option to install the above unit with a built-in 3G modem, for remote communication with the telemanagement system.

They also include overvoltage protection devices and a disconnectable test terminal block that allows you to access the terminals of the supervision system meter. The cabinet has a second enclosure for the measurement of the low voltage supervision system, which includes a busbar with copper bars and TRMCx3 compact three-phase current transformers or individual TC 8.3 transformers in different sizes.

CMBT PRIME COMPACT PT components — Compact DC PRIME concentrator — LV supervision system meter (integrated into the concentrator) — Load-break switch. — 1 compact TRMCx3 transformer or three individual TC 8.3 transformers — Overvoltage protection devices — Disconnectable test terminal block with 10 elements. — 2 and 4-pole circuit breakers. — 3G modem (depending on model).

Cabinets with PRIME telemanagement

Code Type Modem Concentrator Transformers Load-break switch

Dimensions

Q51D630021 CMBT PRIME COMPACT PT 3 200 A 3G COMPACT DC 3G TRMCx3 200/5 A 4x250 A 1000x500x300

Q51D630042 CMBT PRIME COMPACT PT 3 400 A 3G COMPACT DC 3G TRMCx3 400/5 A 4x400 A 1000x500x300

Q51D630053 CMBT PRIME COMPACT PT 3 500 A 3G COMPACT DC 3G TC 8.3 500/5 A 4x630 A 1250x500x300

Q51B600021 CMBT PRIME COMPACT PT 4 200 A - COMPACT DC SBT TRMCx3 200/5 A 4x250 A 1000x500x300

Q51B600042 CMBT PRIME COMPACT PT 4 400 A - COMPACT DC SBT TRMCx3 400/5 A 4x400 A 1000x500x300

Q51B600053 CMBT PRIME COMPACT PT 4 500 A - COMPACT DC SBT TC 8.3 500/5 A 4x630 A 1250x500x300

Q51D630020 CMBT PRIME COMPACT PT 5 200 A 3G COMPACT DC 3G TRMCx3 200/5 A - 1000x500x300

Q51D630040 CMBT PRIME COMPACT PT 5 400 A 3G COMPACT DC 3G TRMCx3 400/5 A - 1000x500x300

Q51D630050 CMBT PRIME COMPACT PT 5 500 A 3G COMPACT DC 3G TC 8.3 500/5 A - 1000x500x300

Q51B600020 CMBT PRIME COMPACT PT 6 200 A - COMPACT DC SBT TRMCx3 200/5 A - 1000x500x300

Q51B600040 CMBT PRIME COMPACT PT 6 400 A - COMPACT DC SBT TRMCx3 400/5 A - 1000x500x300

Q51B600050 CMBT PRIME COMPACT PT 6 500 A - COMPACT DC SBT TC 8.3 500/5 A - 1000x500x300

Models

18


PLC coms

PLC coms

Ethernet

PLC coms

Ethernet

COMPACT DC 4i

3G

COMPACT DC SBT

COMPACT DC 3G

CIRWATT B410TPIndirect measurement CIRWATT B410DP

Direct measurement

CIRWATT B200RCPSingle phase meter



PLC coms

PLC coms

Ethernet

PLC coms

Ethernet

COMPACT DC 4i

3G

COMPACT DC SBT

COMPACT DC 3G


Direct measurement




complete telemanagement system

Industrial application

Urban application

19


PLC coms

PLC coms

Ethernet

PLC coms

Ethernet

COMPACT DC 4i

3G

COMPACT DC SBT

COMPACT DC 3G


Direct measurement




PLC coms

PLC coms

Ethernet

PLC coms

Ethernet

COMPACT DC 4i

3G

COMPACT DC SBT

COMPACT DC 3G


Direct measurement




Rural application

CIRCUTOR has developed a complete range of devices based on the PRIME telemanagement system, offering compact solutions for the industrial, urban and rural environments. Much of our efforts have been devoted to designing concentrators as key components for the management of the system, offering the most suitable solution for each operating environment. The main key to the success of this system is its compact design, on a DIN rail, which makes it easy to install in any type of enclosure.

Although current legislation only covers the inclusion of supply points of under 15 kW in telemanagement systems, CIRCUTOR has already opted to propose broader solutions, making it possible for indirect measurement meters for industrial installations to be included in the system.

www.circutor.com+ information: [email protected]

PRIMESolutions for AMI systems

CIRCUTOR, SA - Vial Sant Jordi, s/n 08232 Viladecavalls (Barcelona) Spain Tel. (+34) 93 745 29 00 - Fax: (+34) 93 745 29 14 [email protected]

CIRCUTOR, SA reserves the right to change any information contained in this catalogue.Code: C2Q023-02

Des

igne

d b

y: Im

age

and

Co

mm

unic

atio

ns D

epar

tmen

t, C

IRC

UTO

R, S

A

solutions for ami systems - circutordocs.circutor.com/docs/cat_prime_2016_en.pdf · 2017. 6. 9. ·...

Documents