solidworks upgrade - ime group of companies : solidworks users trained with previous solidworks...
TRANSCRIPT
PETALING JAYA PENANG 22A, Jalan PJS 1/46 68A, Jalan Perai Jaya 4 46150 Petaling Jaya 13700 Prai Selangor Penang Tel: + 60 3 – 7783 6866 Tel : + 60 4 – 399 5571Fax: + 60 3 – 7781 1185 Fax : + 60 4 – 399 5572 1300-88-2797 | [email protected]
SOLIDWORKS UPGRADE
Duration : 1 day Time : 9:00am – 5:00pmMethodology : Practical hands-on with using computers, lecturing, discussions and case studiesTarget : SolidWorks users trained with previous SolidWorks versionsPrerequisite : To ensure a consistent learning experience for all students, participants should have:
• Basic understanding of previous release of SolidWorksObjective : SolidWorks 2010 Upgrade course will
2010 This will include:
• Introduce Alignment tools on the dimension palette when you select more than one dimension
• Introduce Defeature control how partners.
• Improve more end conditions when creating revolve feature. • Introduce Grid System in sketching to lay out a grid system for large structure. • Improvement in W
representation of weld beadsdrawing.
• Improvement in Helix where you can define variable pitch helix by specifying Height and Revolution which is not able
• Improvement in SpeedPak when assemblies are opened users can now directly use the SpeedPak configurations of its subopen much faster.
• Improvement in among models.
• Introduce Walkplants or other systems.
JOHOR 11-A, Jalan Jati 2, Taman Nusa
Bestari Jaya Bandar Nusa Jaya 81300 Skudai, Johor
1 Tel: + 60 7 – 512 7978 2 Fax: + 60 7 – 512 2162 | www.cadcam.com.my
(605704-H)
SOLIDWORKS UPGRADE
5:00pm on with using computers, lecturing, discussions and case studies
users trained with previous SolidWorks versions To ensure a consistent learning experience for all students, participants should have:
Basic understanding of previous release of SolidWorks SolidWorks 2010 Upgrade course will focus on new enhancements in SolidWorks
This will include:-
Introduce Alignment tools on the dimension palette when you select more than one dimension
Introduce Defeature that automatically strip important details out of models to control how much intellectual property is exposed to vendors, customers, and partners.
Improve more end conditions when creating revolve feature.
Introduce Grid System in sketching to lay out a grid system for large structure.
Improvement in Weldment where simplified weld bead provide a lightweight, simple representation of weld beads and introduce weld table that can be inert in a
Improvement in Helix where you can define variable pitch helix by specifying Height and Revolution which is not able to do in previous version.
Improvement in SpeedPak when assemblies are opened users can now directly use the SpeedPak configurations of its sub-assemblies, which can make the assembopen much faster.
Improvement in Equations where you can share equations and global variables among models.
Introduce Walk-through function to explore or create a video of the 3D geometry of plants or other systems.
on with using computers, lecturing, discussions and case studies.
To ensure a consistent learning experience for all students, participants should have:
focus on new enhancements in SolidWorks
Introduce Alignment tools on the dimension palette when you select more than one
utomatically strip important details out of models to much intellectual property is exposed to vendors, customers, and
Introduce Grid System in sketching to lay out a grid system for large structure.
simplified weld bead provide a lightweight, simple and introduce weld table that can be inert in a
Improvement in Helix where you can define variable pitch helix by specifying Height
Improvement in SpeedPak when assemblies are opened users can now directly use assemblies, which can make the assembly
equations and global variables
through function to explore or create a video of the 3D geometry of
PETALING JAYA PENANG 22A, Jalan PJS 1/46 68A, Jalan Perai Jaya 4 46150 Petaling Jaya 13700 Prai Selangor Penang Tel: + 60 3 – 7783 6866 Tel : + 60 4 – 399 5571Fax: + 60 3 – 7781 1185 Fax : + 60 4 – 399 5572 1300-88-2797 | [email protected]
Course Outline: Lesson 1: Drawing Lesson 2: Defeature Lesson 3: Revolve Lesson 4: Sketching
• Grid System Lesson 5: Weldments
• Weld Beads
• Weld Bead Display
• Fillet and Chamfers
• Weld Table and Symbols
Lesson 6: Helix
Lesson 7: SpeedPak
Lesson 8: Equations
Lesson 9: Walkthrough
JOHOR 11-A, Jalan Jati 2, Taman Nusa
Bestari Jaya Bandar Nusa Jaya 81300 Skudai, Johor
1 Tel: + 60 7 – 512 7978 2 Fax: + 60 7 – 512 2162 | www.cadcam.com.my
(605704-H)