soleil - effegi brega · 2019. 3. 6. · via ferdinando magellano, 7 - 29010 sarmato (pc - italy)...

L I G H T C U R I N G U N I TF O R POLYMERIZATION I N C L U D I N G 3D PRINTING MATERIALS

SOLEIL

50

1968 - 2018Over 50 years of innovation and reliability

L I G H T C U R I N G U N I TF O R POLYMERIZATION I N C L U D I N G 3D PRINTING MATERIALS

SOLEIL

Multipurpose curing unit for photo curing resins and composites

SOLEIL

Eff egi Brega Light Curing Unit Soleil is ideal for light curing materials for 3d printing models.It is a universal Light Curing Unit with a user friendly design.Twelve long last ing LEDs power and di fferent polymerisat ion t imes, variable by the user according to the mater ia ls and working carr ied out . Thirty programs, fi fteen of them with quick selection mode to speed up the operations.Ten pre-installed standard programs for the most common processes and the possibility of customizing them according to the operator needs and the type of material used and the required techniques.Effegi Brega always focused on the market needs and new processing methods, has created Soleil, a polyvalent and innovative light curing unit.Its versatility, user friendliness and the high-tech, allow the dental technician an infi nite creativity.

SOLEILMultipurpose curing unit for photo curing resins and composites

Currently there is a great offer of different composite and resins on the dental market, that impl ies a diversification of the l ight curing process. Soleil off ers the possibility to vary and alternate the range of light application, optimizing the fi nal result, to regulate the power of LEDs ensuring the integrity of materials used regardless of their thickness.Soleil allows several working procedures: ambient pressure, with vacuum, under pressure and it is also possible to heat the chamber at 55 ° C.The possibility to adjust pressure and vacuum settings can improve the appliance’s compactness, making it stronger, easier to polish and less subject to dental plaque.Appearance and colours are greatly improved, and the surface scattering layer is thinner (Eff egi Brega patent).Thanks to the reflective chamber and turntable, the light is evenly diffused with no dark spots, ensuring the complete and safe l ight curing of the whole appliance.

!


Standby

!Start-Up Display

Stand-by

Main

!Start-Up DisplaySplash screen Hight definition 4”½ touch screen.Just a touch and you get immediately to the main screen.

Stand by splash After 30 minutes of inactivity the touch screen activate a standby mode.Just a touch on the screen to go back to the main program.

Main Menu There is a general control of the equipment and an intuitive vision of the various program phases:- Number and name of the selected program- Decremental counter for the duration of the phase in progress- Indication of LEDs on - Indication of total discharge of pressure / vacuum- Indication Vacuum phase in the chamber- Indication of preheating cycle program- Pressure indication in the unit chamber- Heating indication in progress- Temperature indication reached- Indication of the preheating phase in progress

Comand’s Brief description


Quick start mode - 30 programs that can be memorized and named by the operator- 15 quick start programs- 10 programs preset by Effegi Brega- All the functions can be modified by the operator according to the needs of the work performed

Manual mode In case of:- step-by-step processing- complicated operations- practice testIt is possible to operate manually by activating one function at a time according to the needs of the laboratory.

Program execution pageIn a simple way it is possible to set and apply the followings :- Name of the selected program.- Enabling the vacuum heating.- Vacuum time set- LED light time set.- Key for enabling heating with pressure - Pressure time set- Heating time set

Quick start mode- 30 programs that can be memorized and named by the operator- 15 quick start programs- 10 programs preset by Effegi Brega- All the functions can be modified by the operator according to the needs of the work performed

tep-by-step processing

It is possible to operate manually by activating one function at a time according to the needs of the laboratory.

Program execution pageIn a simple way it is possible to set and apply the followings :- Name of the selected program.- Enabling the vacuum heating.- Vacuum time set- LED light time set.- Key for enabling heating with pressure - Pressure time set- Heating time set

Quick start mode- 30 programs that can be memorized and named by the operator- 15 quick start programs- 10 programs preset by Effegi Brega- All the functions can be modified by the operator according to the needs of the work performed

It is possible to operate manually by activating one function at a time according to the needs of the laboratory.

Program execution pageIn a simple way it is possible to set and apply the followings :- Name of the selected program.- Enabling the vacuum heating.

- Pressure time set- Heating time set

In a simple way it is possible to set and apply the followings :

auto_selection

manual_mode

Program_edit


Program 01 Composite OpaqueFirst application of thin opaque to obtain maximum adhesion with the underlying structure.

Program 02 Final opaque compositeProgram developed for the final polymerization of the opaque, a very important procedure for the correct management of all the subsequent stratification phases.

Illustrazione programmi automatici


Program 03 Composite stratification without vacuumSuitable polymerization for the correct consistency of the composites in the repeated stratification phases.

Program 04 Composite stratification with vacuumSpecific program for the processing of composites that requires vacuum use.


Program 05 APCM Muffle (Automatic Program Composite Monolithic) Program dedicated to the production of composites injected into muffles, where the quantities of material to be polymerized are considerable.The combined application of heating with pressure and then vacuum, leads to excellent results.

Program 06 Seal Coat For the adhesive preparation of any surface to be treated, also suitable for final sealing. The application of pressure, and following the vacuum, gives greater security on the final result.


Program 07Tray Specific program for individual trays. The thicknesses and volumes to be polymerized are correctly treated in terms of light emission of polymerization.The power of the light emitted by the LEDs and the congruity of the programs always ensure the correct management of all the polymerization phases.

Program 083D ResinsThe polymerization of parts produced with 3D printers requires a specifi c program to ensure high mechanical properties.The s tud ies determine that the use o f h igh temperatures, in addition to the correct emission of light, reduce the polymerization times keeping unchanged the final characteristics of the resin parts.Soleil’s dedicated 3D program has been designed to fulfill this purpose.


Program 09 Maryland Bridge with vacuum Program suited for cases which have the design features of the Maryland bridges, the vacuum injection increases the compactness and homogeneity of the composite materials used.

Program 10 Only light curingFast program for fixing colors or for intermediate layering steps.


Technical Data:Wavelength available: 380-540 nmAdjustable power applicable to LEDs: 143 mmMax chamber depth : 86 mmTurntable diameter : 140 mmTurntable speed : 5 rpmMax vacuum : -0,90 barMax chamber heating temperature: 55°CMax operating pressure : 0,2 (2) Mpa (bar)Relief valve calibration : 0,25 (2,5) Mpa (bar)Power consumption : 450 WVoltage: 230 VFrequency: 50 HzSound level (SPL) (LPA) 78 dB(A)Plug for power supply : 10÷16 ADepth: 410 mmWidth: 250 mmHeight: 220 mmNet weight: 14 kgGross weight : 26 kgPacking dimensions (L x W x H) : 600x300x450 mm

To e n s u re g o o d d u r a b i l i t y i n t h e o r a l c a v i t y, prosthetic products must have an acceptable quality standard.The reliability offered by the materials available on the current dental market can be compromised by incorrect processing.The polymerization shrinkage can be one of the critical f a c t o r s t h a t d e t e r m i n e t h e l o n g e v i t y o f t h ec o m p o s i t e restaurations (Bausch et al., 1982).Wear represents the detachment of solid material from a surface due to mechanical action. Five mechanisms underlying the loss of substance have been theorized (O’Brien and Yee, 1980): 1) Preferential wear of the matrix to the surface of the composite. It is favuored by polymerization defects.2) Particle loss due to adhesive fracture favoured by a weak matrix-filler bond.3) Cohesive fracture within the matrix. The qualities of the polymerization and of the organic components have a decisive influence. 4) In stress areas, the onset of fatigue and hydrolysis degradation promotes the formation and propagation of micro fractures.5) Exposure o f the po ros i t y tha t de te rm ine the appearance of further defects to the surface of the material (the walls of the bubbles have a poor quality of polymerization).

ConsiderationsThe use o f So le i l guarantees an exce l lent and repeatable photo polymerization standard, giving stabi l i ty to the materials used respecting their chemical-physical propert ies. The versatil ity of the programs, the use of vacuum, pressure and temperature, make it unique and polyvalent, given the growing off er of aesthetic materials and not only present in modern dental laboratories.

EFFEGI BREGA® s.r.l si riserva la facoltà di apportare modifiche e miglioramenti senza obbligo di preavviso.

Foto: Effegi BregaFoto: Laboratorio Clementi Fabio - RomaFoto: Laboratorio Stipo Daniele - Latina ScaloFoto: Oliverio Dental Solution - Latina Designed by Vectortwins / FreepikDesign e Progetto: Oriano Raffaele

COSTRUZIONI APPARECCHIATURE ODONTOTECNICHEVia Ferdinando Magellano, 7 - 29010 Sarmato (PC - Italy)

Tel. +39.0523.88702 - Fax +39.0523887013EMAIL: commerciale@eff egibrega.it - WEB: www.eff egibrega.it

Eff egi Brega Srl

soleil - effegi brega · 2019. 3. 6. · via ferdinando magellano, 7 - 29010 sarmato (pc - italy)...

Documents