soldaduras orejas de izaje
TRANSCRIPT
-
7/27/2019 Soldaduras Orejas de Izaje
1/3
PROJECT SECTION 1
TITLE welded lifting lug DATE 08/18/13
FILE welded_connection_1.xls TIME 4:12 PM
DESCRIPTION
Note: The lifting lug shown above is used in lifting pipes for placement in the shaft of the water filtration plant.
Pipe wall thicknesses vary between 32 mm and 12 mm with variation in pipe weights. For this application it will be assumed thatthe maximum force is as shown above and acts on the maximum pipe wall thickness.
INPUT
performance factor phiw = 0.67
load factor lf = 1.4weld size ( leg ) ws = 10 mmlug thickness tlug = 25 mm
lug length llength= 300 mmwall thickness twall = 32 mmapplied force Vf = 212 kN
ultimate plate strength Fu = 0.45 kN/mm2ultimate electrode strength Xu = 0.48 kN/mm2angle of axis force/weld line theta = 45 degree
CALCULATIONS
min. plate thickness t = MIN(tlug,twall) = 25 mmcross section plate Am = t*wlength = 15000 mm2weld length wlengt = llength*2 = 600 mm
cross section weld Aw = ws*wlength = 6000 mm2shear resistance base metal Vrfb = 0.67*phiw*Am*Fu = 3030.1 kN $13.13.2.2shear resistance weld Vrfw = 0.67*phiw*Aw*Xu*(1+.5*SIN(RADIAN = 1521.4 kN $13.13.2.2
resulting shear resistance Vrf = MIN(Vrfb,Vrfw) = 1521.4 kN $13.13.2.2
design efficiency (
-
7/27/2019 Soldaduras Orejas de Izaje
2/3
Engineering Calculation Template
Manual
INTRODUCTION
1.
2. Key functions:
- set up formulae
- page setup
HOW TO USE
[0]
[1] Use the styles as in sheet 'sample' to fill in title, logo, etc.
[2] Define variables, equations, units. Make sure not to use cell locations as variable names!
[3]
SHEET STRUCTURE
Ranges:
Column A: section descriptionsColumn B: variable/formula description
Column C: variable name, to be referenced in formulae
Column D, F: equal sign
Column E: formulae
Column G: variable values or formula results
Column H: units
number of rows used: cell J1
calculation contents: from row 15
MACRO DESCRIPTIONS
formatted
setWidth
CREDITS
Adjust column widths so that it looks like that in sheet 'sample'.
This template is first created by Mr. Michael Gedig using the ideas from Dr. S. F. Stiemer's and Mr. David
"auto123.wks". Mr. Ye Zhou got his hands on it and further improved it a bit.
This template provides necessary macros to build up engineering calculations for quick re-calc and clear p
Save this file first with another appropriate name. Ensure this file is put in the same directory as your newly
Use macro 'formatted' to calculate the defined formulae. Bring up a list of macro by ALT-F8.
validate and calculate all the variables and formulae. All variable referenced in the formulae have to be def
-
7/27/2019 Soldaduras Orejas de Izaje
3/3
.K.
resentation.
saved file.
ined in the same