smart dcr gidc - user manual · 5. site plan, floor plan, section, elevation to be kept inside...
TRANSCRIPT
2017
Smart DCR – GIDC - User Manual
July
GIDC Smart DCR – User Manual July 2017
P a g e 1 | 9
Index
S. No. Table of Contents Page Number
1. Introduction 2
2. Prominent process of the software 2
2.1 Online Building Plan Approval System Process 2
2.2 Smart DCR Scrutiny Process 2
3. Objectives 3
4. Scope of the system 3
5. Do’s and Dont’s 3
5.1 Do’s 3
5.2 Dont’s 4
6. Drawing file specifications 4
7. Precheck software 4
8. Procedure to create a drawing 5
8.1 Parameters to be drawn using LINE Objects 5
8.2 Parameters to be drawn using POLYLINE Objects 5
8.3 Parameters to be drawn using TEXT Objects 6
9.a Details of colour code format 7
9.b List of NON FSI text 8
10.
Annexure Parameters Snapshots 9
GIDC Smart DCR – User Manual July 2017
P a g e 2 | 9
1. INTRODUCTION Every industrial zone in the world is continually evolving and developing to meet its investor’s needs. An authority powered by government is controlling the development of these industrial areas to have a harmonious as well as infrastructural and technologically superior ecosystem for all. GIDC has been created for securing the orderly establishment and organization of industries in industrial areas and industrial estates in the state. To fulfil the above mandate, the Corporation has established 202 industrial estate. Under the direction of Government of India, Department of Industrial Policy and Promotion (DIPP), State Government had taken initiative under the Ease of Doing Business (EODB) to provide select services online. Gujarat Industrial Development Corporation (GIDC) implemented a smart DCR system for plan approval. The software will study the engineering plans provide in the CAD format, Process the plans and generate complete and detailed set of report for further decisions by the approval authorities. A large amount of time saving will be achieved and the planners consider this as a boon to them. This also helps investors as the waiting time for sanctions/approvals will be greatly reduced.
2. PROMINENT PROCESS OF THE SOFTWARE 2.1 Online Building Plan Approval System Process:
Automation of Online Building Plan Approval System is the main part of the SmartDCR which is used by Architects as well as Officers of Gujarat Industrial Development Corporation. 1. System is designed for Architects to register and submit the drawing and get the
Reference Number of the Application. 2. This system is designed to allow an Architect to submit the drawing and check
the status of drawing online. 3. The software will facilitate communication between Architects via E-Mail, Public
can also view the status of their File Online. 4. The system also contains a relational database having list of Architects’ details. 5. The Architects can also get their scrutiny report online using their Reference
Number.
2.2 Smart DCR Scrutiny Process:
This Process will scrutinize the submitted drawing by comparing with Gujarat Bye-Laws and generates Reports. The uploaded drawing should be in .dwg format. Architects can check their drawing status, whether successfully submitted or Returned back through e-mail.
3. OBJECTIVES To bring transformation in the plan scrutiny processing system with speed, accuracy, consistency and transparency in the entire scrutiny process. To achieve the goal, it is proposed to automate the planning scrutiny process by customization with Smart DCR.
4. SCOPE OF THE SYSTEM
The Automation helps to increase the productivity and Accuracy of the Drawing Result. 6. Speed up the Scrutiny process.
GIDC Smart DCR – User Manual July 2017
P a g e 3 | 9
7. Easier Public Interaction with Online System. 8. Reduce the Time consumption and Manual Errors of Scrutiny Process. 9. Savings on the infrastructure required to store paper drawings. 10. Easy to retrieve data since the data is stored in digital format.
5. DO’s and DON’Ts: The processing of the file and further generation of reports is dependent on the Polylines, Lines and Text placed in the drawing file.
5.1 DO’s:
1. Floor plans, section, elevation to be kept in Scale 1:1 in meters 2. Polylines shall be drawn in the form of Light Weight Polylines (lwpolylines), as 3D
Polylines are not supported. They should be drawn as closed polylines. 3. Polyline’s line thickness shall be zero. 4. Drawing objects shall be placed in model space only. 5. Site plan, floor plan, section, elevation to be kept inside bounding rectangle color 61
polyline
5.2 DON’T’s: 1. All drawing objects shall be in 2 Dimensional (Z-Coordinates – Zero) and placed
without any elevation. 2. Blocks, Regions, Wipe-out and External references shall not be placed in the drawing
as they will not be processed. 3. The Colour coded items, i.e. polylines, lines and texts which are intended to be
processed must be in the layers starting with FLOOR. Other layers will be ignored by the software
4. Mtext will not be processed by the software and whatever text placed on Floor layers shall be Text only.
5. Plans prepared using Educational version of AUTOCAD or other software like REVIT cannot be accepted as its use is limited.
6. DRAWING FILE SPECIFICATIONS
Preparation of computerized plans for SmartDCR has the following steps, which are to be followed compulsory. Otherwise SmartDCR will not process the given drawing.
1. Proposed Floor layer: FLOOR01, FLOOR02, etc. corresponding to the floor count.
2. FLOOR-STILT or FLOOR-GROUND for common Site related details.
3. For Proposed Basement floor, layer should be FLOOR-BF1, FLOOR–BF2 etc. Corresponding to the Basement Floor Count.
4. Don’t use unnecessary spaces in layer Names.
2. All proposal drawing should be in .DWG Format
3. All objects to be processed by SmartDCR should be drawn using Lines, Polylines and Text and placed in layers starting with Floor.
4. Layers and Colours should be followed as per the colour code table.
5. Remove the unused layers, dimension styles etc.
6. Drawing units should be in meters.
7. All details should be drawn in scale 1:1 (True Scale).
8. Avoid unnecessary objects in the drawing.
9. In the site plan, Front Setback should be in the Bottom Of the drawing.
10. Avoid unnecessary coordinates in polylines.
GIDC Smart DCR – User Manual July 2017
P a g e 4 | 9
11. Don’t Overlap the Objects.
7. PRE-CHECK SOFTWARE:
Pre-check is the software given for finding out all the polyline, line, and text related problems in the drawing. When the Applicant submits the building map proposal, this software enables the applicant to rectify the defects in the drawing and make it suitable to run in the Scrutiny software. It reads the drawing elements and lists all the discrepancies in the drawing. It will process the file and gives the output with various parameters as listed below. If errors are found in the drawing, the drawing will be populated with hyperlinks to the errors and will be returned to the Applicant via email.
1. Setback Boundary 2. Multiple Polyline Geometry Problems 3. Invalid object colour 4. Misplaced OTS 5. Existence of Blocks, Regions, Wipe-outs & External references in Floor layers 6. Mandatory requirements 7. Other critical errors
By clicking on the above disqualified items in the software interface, details will be displayed such as disqualified object name; floor name and drawing coordinate position. It will also draw a crossed grey line on all the disqualified objects throughout the drawing.
8. PROCEDURE TO CREATE A DRAWING
8.1 Parameters to be drawn using LINE Objects:
1. Gate
2. Basement Floor Height
3. Stilt Floor Height
4. Plinth Height
5. Floor Height
6. Front margin
8. Side 1 margin
9. Side 2 margin
10. Rear margin
11. Building height
12. Total building height
8.2 Parameters to be drawn using POLYLINE Objects:
1. Plot Boundary
2. Margin Boundary
3. Stilt Parking Area Boundary
4. Rain Water Harvesting Trench
5. FSI
6. Staircase Area
7. Lift
8. Balcony
9. Block Rectangles for Group Development
GIDC Smart DCR – User Manual July 2017
P a g e 5 | 9
10. Bounding Rectangle
11. Visitor parking
12. Reserved for Cars
13. Parking 8.3 Parameters to be drawn using TEXT Objects:
1. Usage of Commercial building such as Office, Restaurant, Departmental store,
Shop, Educational etc and Usage of Non habitation such as Water closet, Bathroom, Urinal
2. Tree text should be kept as TREES-1 or TREES-2 or TREES-3 etc. 3. Names of blocks, Typical Block text 4. Typical floor text:
In the Text Objects for Typical Floors are followed as
Format: “FLOOR01, FLOOR02, FLOOR03, FLOORnth
- Typical” In the Text Objects for Typical Blocks are followed as
Format: “BLOCK01, BLOCK02, BLOCK03…… BLOCKnth
- Typical”
GIDC Smart DCR – User Manual July 2017
P a g e 6 | 9
9a. DETAILS OF COLOUR CODE FORMAT:
S.No. Description Color Code
Corresponding Layer
Polyline Objects
1 Plot Boundary 7 FLOOR-STILT/FLOOR-GROUND
2 Margin Boundary 10 FLOOR-STILT/FLOOR-GROUND
3 Stilt Parking Area Boundary 5 FLOOR-STILT
4 Rain Water Harvesting Trench 42 FLOOR-STILT/FLOOR-GROUND
5 Residential FSI 181 Applicable floor layer*
6 Commercial FSI 6 Applicable floor layer*
7 Staircase Area 115 Applicable floor layer*
8 Lift 22 Applicable floor layer*
9 Balcony 35 Applicable floor layer*
10 OTS and Duct 3 Applicable floor layer*
11 Industrial FSI 134 Applicable floor layer*
12 Non FSI 4 Applicable floor layer*
13 Bounding Rectangle 61 FLOOR-STILT/FLOOR-GROUND
14 Visitor Parking 152 FLOOR-STILT/FLOOR-GROUND
15 Reserved for Cars 245 FLOOR-STILT/FLOOR-GROUND
16 Parking area 104 FLOOR-STILT/FLOOR-GROUND
Text Objects
1 Water closet, Bathroom, Urinal etc. 81 Applicable floor layer*
2 Block Naming and Typical Block text 50 FLOOR-STILT / FLOOR-GROUND
3 Floor Naming and Typical text for identifying Typical floors
7 Applicable floor layer*
4 No. of Trees to be planted inside the Plot 93 FLOOR-STILT/FLOOR-GROUND
5 Industrial building use Text 134 Applicable floor layer*
6 Non FSI 4 Applicable floor layer*
Line Objects
1 Floor height 91 Applicable floor layer*
2 Stilt Floor Height 21 FLOOR-STILT
3 Basement Floor Height 123 FLOOR-BF1
4 Plinth height 105 FLOOR-STILT/FLOOR-GROUND
5 Front margin 4 FLOOR-STILT/FLOOR-GROUND
6 Side1 margin 6 FLOOR-STILT/FLOOR-GROUND
7 Side2 margin 2 FLOOR-STILT/FLOOR-GROUND
8 Rear margin 3 FLOOR-STILT/FLOOR-GROUND
9 Gate 161 FLOOR-STILT/FLOOR-GROUND
GIDC Smart DCR – User Manual July 2017
P a g e 7 | 9
9b. LIST OF NON FSI TEXT
1. OUTHOUSE
2. GARAGE
3. WATER CLOSET
4. STORE SHED
5. PORCH
6. MOTOR QUARTERS
7. PRIVEYS
8. BATHROOM
9. COOLING TOWER
10. GENERATOR ROOM
11. TRANSFORMER ROOM
12. SECURITY CABIN
13. PUMP ROOM
14. WATER TANK
15. SERVANT QUARTERS
16. FOUNTAIN
17. SEPTIC TANK
18. SWIMMING POOL
19. OVER-HEAD TANK
20. WC
GIDC Smart DCR – User Manual July 2017
P a g e 8 | 9
ANNEXURE PARAMETERS SNAPSHOTS
S.No Description Layer
GIDC-Smart DCR-USER MANUAL
1 Super Imposed Plot Boundary shall be drawn as Polyline inColor No. 7
FLOOR-GROUNDorFLOOR-STILT
SUPER IMPOSED PLOT BOUNDARY
Color
Number
Super ImposedPlot Boundary
7
Polyline
FRONT OPENSPACE
REAR OPENSPACE
PROPOSED BUILDING
SITE PLAN
3M WIDE GATE
SID
EO
PEN
SPA
CE
RWHRWH
1.40
2.11
1.40
4.21
PATTA 10.00
22 M WIDE ROAD
CAR PARK
25 SQ.M
PATT
A20
.64
1.30SI
DE
OPE
NSP
AC
E
PATT
A20
.64
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
2 Margin boundary shall be drawn as Polyline in Color No. 10 FLOOR-GROUNDorFLOOR-STILT
MARGIN BOUNDARY
Color
Number
Margin Boundary
10
Polyline
FRONT OPENSPACE
REAR OPENSPACE
PROPOSED BUILDING
SITE PLAN
3M WIDE GATE
SID
EO
PEN
SPA
CE
RWHRWH
1.40
2.11
1.40
4.21
PATTA 10.00
22 M WIDE ROAD
CAR PARK
25 SQ.M
PATT
A20
.64
1.30SI
DE
OPE
NSP
AC
E
PATT
A20
.64
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
3 Front margin shall be drawn as Line in Color No. 4 FLOOR-GROUNDorFLOOR-STILT4 Side 1 margin shall be drawn as Line in Color No. 6
5 Side 2 margin shall be drawn as Line in Color No. 2
6 Rear margin shall be drawn as Line in Color No. 3
MARGIN
Color
Number
Rear Margin
3
Line
Color
Number
Side 2Margin
2
Line
Color
Number
Side 1Margin
6
Line
Color
Number
Front Margin
4
Line
FRONT OPENSPACE
REAR OPENSPACE
PROPOSED BUILDING
SITE PLAN
3M WIDE GATE
SID
EO
PEN
SPA
CE
RWHRWH
1.30
1.94
1.30
3.89
PATTA 10.00
22 M WIDE ROAD
CAR PARK
25 SQ.M
PATT
A20
.64
1.20
SID
EO
PEN
SPA
CE
PATT
A20
.64
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
7 Plot frontage / Width of site shall be drawn as Open Polylinein Color No. 96.
FLOOR-GROUNDorFLOOR-STILT
PLOT FRONTAGE / WIDTH OF SITE
Color
Number
Plot Frontage
96
Open Polyline
FRONT OPENSPACE
REAR OPENSPACE
PROPOSED BUILDING
SITE PLAN
3M WIDE GATE
SID
EO
PEN
SPA
CE
RWHRWH
1.40
2.11
1.40
4.21
PATTA 10.00
22 M WIDE ROAD
CAR PARK
25 SQ.M
PATT
A20
.64
1.30SI
DE
OPE
NSP
AC
E
PATT
A20
.64
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
Color
Number
Visitor Parking
152
Polyline
RESERVED FOR CARS
STILT FLOOR PLAN
8 Visitor Parking area shall be drawn as Polyline in Color No.152. Parking area shall be drawn as Polyline in Color No. 104.Reserved for Cars parking area shall be drawn as Polyline inColor No. 245. Additionally Stilt Parking area shall be drawnas Polyline in Color No. 5.Note: Colour No. 5 is applicable only for Stilt Parking and notfor Open Parking.
FLOOR-STILT
COVERED PARKING
REAR OPEN
12 X 2.25FRONT OPEN
4.5M WIDE GATE
PARKING AREA
VISITOR PARKING Color
Number
Parking Area
104
Polyline
Color
Number
Reserved for Cars
245
Polyline
12.02
17.05
12 X 1.66
SID
EO
PEN
1.51
X13
.14
SID
EO
PEN
1.51
X13
.14
Color
Number
Stilt Parking
5
Polyline
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
9 Visitor Parking area shall be drawn as Polyline in Color No.152. Parking area shall be drawn as Polyline in Color No. 104.Reserved for Cars Parking area shall be drawn as Polyline inColor No. 245
FLOOR-GROUND
OPEN PARKING
Color
Number
Visitor Parking
152
Polyline
FRONT OPENSPACE
REAR OPENSPACE
PROPOSED BUILDING
SITE PLAN
3M WIDE GATE
SID
EO
PEN
SPA
CE
RWHRWH
2.40
2.04
2.40
6.71
PATTA 10.00
RESERVED FOR CARS
PATT
A20
.64
2.30SI
DE
OPE
NSP
AC
E
PATT
A20
.64
22 M WIDE ROAD
PARKING AREA
VISITOR PARKING
Color
Number
Parking Area
104
Polyline
Color
Number
Reserved for Cars
245
Polyline
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
10 Rain Water Harvesting Trench shall be drawn as Polyline inColor No. 42.
FLOOR-GROUNDorFLOOR-STILT
RAIN WATER HARVESTING TRENCH
Color
Number
Rain WaterHarvesting Trench
42
Polyline
FRONT OPENSPACE
REAR OPENSPACE
PROPOSED BUILDING
SITE PLAN
3M WIDE GATE
SID
EO
PEN
SPA
CE
RWHRWH
1.40
2.11
1.40
4.21
PATTA 10.00
22 M WIDE ROAD
CAR PARK
25 SQ.M
PATT
A20
.64
1.30
SID
EO
PEN
SPA
CE PA
TTA
20.6
4
RAINWATER HARVESTING
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
11 Residential FSI shall be drawn as Polyline in Color No. 181. Applicable FloorLayer
RESIDENTIAL FSI
Color
Number
Residential FSI
181
Polyline
BED ROOM
3.0 x 4.5
HALL/DINING
4.93 X 3.92
2.00 x 3.00
1.81 X 2.19
D1
D
O
FIRST FLOOR PLAN
A
D1
1.81 X 2.19
BATHROOM
WATER CLOSET
BATHROOM
W
V
V
W
W
W
9.75
11.70
KITCHEN
WATER CLOSET
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
12 Dwelling unit shall be drawn as Polyline in Color No. 230 andKitchen text with Dwelling unit text shall be kept inside 230Color Polyline
Applicable FloorLayer
DWELLING UNIT
Color
Number
Dwelling Polyline
230
Polyline
BED ROOM3.0 x 4.5
HALL/DINING4.93 X 3.92
KITCHEN2.00 x 3.00
D1
D
O
FIRST FLOOR PLAN
KITCHEN
1
D1
W
V
V
W
W
W
Color
Number
Kitchen
230
Text
9.75
11.70
1.81 X 2.19
1.81 X 2.19
BATHROOM
WATER CLOSET
BATHROOM
WATER CLOSET
Color
Number
Dwelling unit Text
230
Text
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
13 Bathroom, Water closet and Urinal shall be drawn as Polylinein Color No. 81 and text shall be placed
Applicable FloorLayer
BATHROOM, WATER CLOSET AND URINAL
FIRST FLOOR PLAN
Color
Number
Water closet
81
Polyline and Text
Color
Number
Bathroom
81
Polyline and Text
BED ROOM3.0 x 4.5
HALL/DINING4.93 X 3.92
KITCHEN2.00 x 3.00
D1
D
O
KITCHEN
1
D1
W
V
V
W
W
W
9.75
11.70
1.81 X 2.19
1.81 X 2.19
BATHROOM
WATER CLOSET
BATHROOM
WATER CLOSET
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
14 Habitation room shall be drawn as Polyline in Color No. 150 Applicable FloorLayer
HABITATION ROOM
Color
Number
Habitation room
150
Polyline
BED ROOM
3.0 x 4.5
HALL/DINING
4.93 X 3.92
2.00 x 3.00D1
D
O
FIRST FLOOR PLAN
KITCHEN
1
D1
W
V
V
W
W
W
9.75
11.70
1.81 X 2.19
1.81 X 2.19
BATHROOM
WATER CLOSET
BATHROOM
WATER CLOSET
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
15 Commercial FSI shall be drawn as Polyline in Color No. 6 andcorresponding Building use text should be kept inside theboundary in Color No. 6.
Applicable FloorLayer
COMMERCIAL FSI
FIRST FLOOR PLAN
Color
Number
Commercial FSI
6
Polyline and Text
W W
F.E
F.E
F.E
F.G1 F.G
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W W W
F.G2
ALL COLUMN0.3MX0.6M
16.61M x 32.92M
V1
UP LIFT1.98X1.98
L.D
TOILET1.98X1.98
V1
D1
O
SHOP
7.46
14.58
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
16 Industrial FSI shall be drawn as Polyline in Color No. 134 andtext shall be placed in the same Color
Applicable Floorlayer
INDUSTRIAL FSI
Color
Number
Industrial FSI
134
Polyline and Text
GROUND FLOOR PLAN
MD
W2
W2
6.72 M X 8.23 M
6.72M X 6.30M
W2
W5
W3
W3W5
BOILER HOUSE
HEIGHT-8.00W2
MD
7.02
BAGAS STORAGE AREA
HEIGHT-4.00
W5
W2
W1
16.63
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
LIFT2.24 x 2.40
UP
W
17 Non FSI area shall be drawn as Polyline in Color No.4 andText shall be placed in the same layer. Kindly refer to section9b in User Manual for Non FSI text.
Applicable FloorLayer
D
Color
Number
Pump Room
4
Polyline and Text
NON FSI
1.74 X 2.69
PUMP ROOM
BASEMENT FLOOR PLAN
7.71
16.87
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
18 Building blocks shall be distinguished from each other in caseof Group Developments. Distinguishing of blocks shall bedrawn by Polylines in Color No. 50 along with Block names astext in the same Color for identifying individual blocks presentsuch as Block-A, Block-B. The individual floor plans shall bedrawn completely within Color No. 50 Polyline. In Site plan,Block footprint polyline shall be drawn in Color No. 10 andBlock name text shall be kept in Color No. 50 for each block
FLOOR-GROUNDorFLOOR-STILT
DISTINGUISHING BLOCKS
Color
Number
Block Distinguishers
50
Polyline & Text
NPLOT PLAN FOR G.I.D.C. APPROVAL
300MM DIA, CASING
160MM DIA. PIPE
MAI
NEN
TRY COP-1
COP-2
P-1
P-2
P-3
N
B
B
A X 1TOTAL (I)
A 9.00 X 10 .00 X 0.5
TOTAL (II)
TOTAL
A
N
2
34
A
A
A
B
B
B
B
B
B
PLANT BUILDINGOFFICE BLDG. ST ORAGE S HED
A
A A
A
A X 1
B X 1TOTAL (I)
A 1 8.50 X 1 5.00 X 0 .5
TO TAL (II)
TO TAL
A X 1B X 1
TOTAL (I)
A 1 6.50 X 1 8.00 X 0 .5TOTAL (II)
TO TAL
A X 1TO TAL (I)
A X 1TOTAL (I)
A X 1
TOTAL (I)
A X 1TOTAL (I)
234
AA
A X 1TO TAL (I)
BLOCK 2 3 4 BLOCK 6
BLOCK 2 3 4
BLOCK 7 8TREES-80
BLOCK 6
BLOCK 5
BLO CK 1
Color
Number
Block Footprint
10
Polyline
Color
Number
Block Name
50
Text
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
TYPICAL FLOOR TEXT
FLOOR01,FLOOR02,FLOOR03-TYPICAL
19 For the Typical floors, if it starts from FLOOR01 and lasts upto FLOOR03, the text shall be given in the Colour No. 7 as"FLOOR01, FLOOR02, FLOOR03-TYPICAL", as shown inthe drawing below.
Starting FloorName(FLOOR01)
Color
Number
Typical Floor
7
Text
TYPICAL FLOOR PLAN(First, Second and Third floor )
D1
D1
D2
W3 W4
BED ROOM3.40 x 3.80
BED ROOM3.34 x 2.91
HALL2.82 x 3.92
1.88 x 2.78KITCHEN
W6
W5
W7
W6
1
Typical Floor
Polylines
LayerFLOOR01
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
20 Height of the building shall be drawn as Line in Color No. 151 FLOOR-GROUNDorFLOOR-STILT
HALL
KITCHEN
KITCHEN
HALL
HALL
SECTION AT AA'
HEIGHT OF THE BUILDING
Color
Number
Height ofthe building
151
Line
KITCHEN
GL GL
12.55
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
21 Total Height of the building shall be drawn as Line in ColorNo. 233
FLOOR-GROUNDorFLOOR-STILT
TOTAL HEIGHT OF THE BUILDING
Color
Number
Total height ofthe building
233
Line
HALL
KITCHEN
KITCHEN
HALL
HALL
SECTION AT AA'
KITCHEN
GL GL
17.13
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
22 Stilt Floor height is the minimum clear height taken from thebottom of the stilt floor to the bottom of the roof beam. It shallbe drawn as line in Color No. 21.
FLOOR-STILT
First floor
Stilt Parking
STILT FLOOR HEIGHT
Color
Number
Stilt Height
21
Line
Parapet
Stilt Parking3.98
10.39
11.96
GL GL
SECTION AT AA'
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
23 Basement Floor height is the distance measured between thebottom of the basement floor and roof of the same basementfloor level. It shall be given as line in Color No. 123. If there ismore than one basement floor, its height shall be given in thecorresponding basement floor layer.
FLOOR-BFxwhere 'x' is thebasement floornumber.
BASEMENT FLOOR HEIGHT
Color
Number
Basement FloorHeight
123
Line
Ground Floor
Basement Parking
Parapetl
GL GL
4.28
5.19
6.77
SECTION AT AA'
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
Color
Number
Plinth Height
105
Line
SECTION B-B
24 Plinth height shall be drawn as line in Color No. 105 FLOOR-GROUNDorFLOOR-STILT
PLINTH HEIGHT
9.69
12.68
G.L G.L0.59
BED ROOMHALL TOILET
BED ROOMHALL TOILET
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
SECTION B-B
25 Floor height shall be drawn as line in Color No. 91 In all the floors,wherever applicable
FLOOR HEIGHT
Color
Number
Floor Height
91
Line
9.69
12.68
G.L G.L0.59
BED ROOMHALL TOILET
BED ROOMHALL TOILET
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
GATE
26 Gate shall be drawn as line in Color No. 161 FLOOR-GROUNDorFLOOR-STILT
Color
Number
Gate
161
Line
FRONT OPENSPACE
REAR OPENSPACE
PROPOSED BUILDING
SITE PLAN
4M WIDE GATE
SID
EO
PEN
SPA
CE
RWHRWH
1.40
2.11
1.40
4.21
PATTA 10.00
22 M.ROAD
CAR PARK
25 SQ.M
PATT
A20
.64
1.30
SID
EO
PEN
SPA
CE
PATT
A20
.64
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USERMANUAL
LIFT AND STAIRCASE
UP
UP
Color
Number
Staircase
115
Polyline
Color
Number
Lift
22
Polyline
27 Lift shall be drawn as Polyline in Color No. 22. Staircase shallbe drawn as Polyline in Color No.115.
Applicable FloorLayer
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USERMANUAL
Color
Number
Open to Skyand Duct
3
Polyline
28 Open to sky and duct shall be drawn as Polyline in Color No.3.
FLOOR-GROUNDorCorrespondingFloor Layer
BED ROOM
3.0 x 4.5
HALL/DINING
4.93 X 3.92
KITCHEN
2.00 x 3.00
1.81 X 2.19
MD
D1
D
O
GROUND FLOOR PLAN
1
WATER CLOSET
W
V
W
W
W
Open to sky1.81 x 1.19
OPEN TO SKY AND DUCT
9.75
11.70
KITCHEN
1
WATER CLOSET
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
29 Tree text to be kept in Color No. 93 FLOOR-GROUNDorFLOOR-STILT
TREE
TREES-2
Color
Number
Tree
93
Text
FRONT OPENSPACE
REAR OPENSPACE
PROPOSED BUILDING
SITE PLAN
3M WIDE GATE
SID
EO
PEN
SPA
CE
RWHRWH
1.68
2.53
1.68
5.05
PATTA 10.00
22 M.ROAD
PATT
A20
.64
1.56
SID
EO
PEN
SPA
CE
PATT
A20
.64
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
MAI
NE
NTR
Y
COP-1
COP-2
15.16 x 14.41 = 218.45 SQ.M.PARKING AREA
P-1
P-2
P-3
30 COMMON OPEN PLOT area shall be drawn as Polyline inColor No. 36
FLOOR-GROUNDorFLOOR-STILT
COMMON OPEN PLOT
SITE PLAN
Color
Number
Common Open Plot
36
Polyline
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
BALCONY
Color
Number
Balcony
35
Polyline
31 Balcony shall be drawn as Polyline in Color No. 35 Applicable FloorLayer
1M WIDE BALCONY
W3
V
W4 W3
D
D
D
WATER CLOSET
KITCHEN
BED ROOM
BED ROOM
DRG./DIN.
D1W3
W3
D23.0 x 1.62
2.91 x 2.11
3.11 x 3.40
3.05 x 4.57
3.41 x 5.37
FIRST FLOOR PLAN
13.13
11.70
1
KITCHEN
1
1M WIDE BALCONY
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
32 Road width shall be drawn as line in Color No. 41 FLOOR-GROUNDorFLOOR-STILT
ROAD WIDTH
Color
Number
Road width
41
Line
FRONT OPENSPACE
REAR OPENSPACE
PROPOSED BUILDING
SITE PLAN
3M WIDE GATE
SID
EO
PEN
SPA
CE
RWHRWH
1.40
2.11
1.40
4.21
PATTA 10.00
22 M WIDE ROAD
CAR PARK
25 SQ.M
PATT
A20
.64
1.30SI
DE
OPE
NSP
AC
E
PATT
A20
.64
Smart DCR Version 2
S.No Description Layer
GIDC-Vinzas-Smart DCR-USER MANUAL
33 Bounding rectangle shall be drawn as polyline in Color No 61.Entire drawing should be kept inside the Boundingrectangle.If there are any objects found outside Boundingrectangle, drawing will be marked as error by the Prechecksoftware.
FLOOR-GROUNDorFLOOR-STILT
Color
Number
BOUNDING RECTANGLE
61
Polyline
BOUNDING RECTANGLE
The lower left corner of the Bounding rectangle to be kept in 0,0,0 co-ordinate