sixnet bt modem user guide
DESCRIPTION
Sixnet BT modem command user interface user guideTRANSCRIPT
-
Industrial Wireless Modems
BT-5600v2 BT-5800v2 BT-6000 series
User's Guide
1.8
March 30, 2010
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
2
1.8 March 30, 2010
No part of this publication, or any software included with it, may be reproduced, stored in a retrieval system, ortransmitted in any form or by any means, including photocopying, electronic, mechanical, recording or otherwise,withoutthepriorwrittenpermissionofthecopyrightholder.Sixnet,LLC(Sixnet)providesthisdocumentasis,withoutwarrantyofanykindeitherexpressedorimpliedincluding,butnotlimitedto,theimpliedwarrantiesofmerchantabilityandfitnessforaparticularpurpose.Sixnetmaymakechangesof improvements in the equipment, software,or specificationsdescribed in thisdocument at any time andwithoutnotice.Thesechangesmaybeincorporatedinnewreleasesofthisdocument.Thisdocumentmaycontaintechnicalinaccuraciesortypographicalerrors.Sixnetanditssubsidiarieswaiveresponsibilityforanylabor,materials,orcostsincurredbyanypersonorpartyasaresultofusingthisdocument.Sixnetandanyof itssubsidiariesorotheraffiliatesshallnotbe liable foranydamages (including,butnot limited to,consequential,indirectorincidental,specialdamages,orlossofprofitsordata)eveniftheywereforeseeableandSixnethasbeeninformedoftheirpotentialoccurrencearisingoutoforinconnectionwiththisdocumentoritsuse.ComputerSoftwareCopyrightsThe products described in this manual include copyrighted Sixnet computer programs stored in semiconductormemoriesorothermedia.Laws inCanada,theUnitedStatesandothercountriespreserveforSixnetcertainrightsforcopyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrightedcomputerprogram.Accordingly,anycopyrightedSixnetcomputerprogramscontainedintheSixnetproductsdescribedinthismanualmaynotbecopiedwithouttheexpresswrittenpermissionofSixnet.Furthermore,thepurchaseofSixnetproductsshallnotbedeemedtogranteitherdirectlyorbyimplication,estoppels,orotherwise,any licenseunder the copyrights,patentsorpatentapplicationsof Sixnet,except for thenormalnonexclusive,royaltyfreelicensetousethatarisesbyoperationoflawsinthesaleofaproduct.Sixnet,LLC2425,46thAvenue,Lachine,QuebecH8T3C9,CanadaPhone: 15144229110option2TollFree: 18774229110option2Fax: 15144223338Web: www.sixnet.com
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
3
1.8 March 30, 2010
Liability Notice
While every efforthasbeenmade to achieve technical accuracy, information in thisdocument is subject to changewithoutnoticeanddoesnotrepresentacommitmentonthepartofBlueTreeWirelessData,Inc.,oranyofitssubsidies,affiliates,agents,licensors,orresellers.Therearenowarranties,expressorimplied,withrespecttothecontentofthisdocument.
Declaration of Conformity ThedevicecomplieswithPart15ofFCCrulesandwithICES003ofIndustryCanadaRules.Operation issubjecttothefollowingtwoconditions:
Thisdevicemaynotcauseharmfulinterference This devicemust accept any interference received, including interference thatmay cause undesired
operation
Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththe manufacturer's instructions, may cause interference harmful to radio communications. However, there is noguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
WARNING To complywithRSS102HealthCanada SafetyCode6, theantenna(s)used for this transmittermustbe installed toprovideaseparationdistanceofatleast10cmfromallpersonsandmustnotbecolocatedoroperatinginconjunctionwithanyotherantennaortransmitter.UsersandInstallersmustbeprovidedwithantenna installation instructionandtransmitteroperatingconditionsforsatisfyingRFexposurecompliance.BT6000seriesbarrelpowerconnectorshallnotbeusedinhazardouslocations.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
4
1.8 March 30, 2010
Change historyVersion Date Description1.8 March30,2010 Changedocumentformat
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
5
1.8 March 30, 2010
Table of content 1 ProductOverview ................................................................................................................................................. 8 1.1 Introduction........................................................................................................................................................... 8 1.2 Modemfeatures .................................................................................................................................................... 9 1.3 Specifications....................................................................................................................................................... 11
2 BlueVueDeviceManager(BVDM) ....................................................................................................................... 21 2.1 Connectingtothemodem................................................................................................................................... 22 2.2 Softwareoverview............................................................................................................................................... 24
3 ATCommands ..................................................................................................................................................... 25 3.1 Access .................................................................................................................................................................. 25
4 Activation&WANSetup ..................................................................................................................................... 26 4.1 Activation(CDMAmodemsonly) ........................................................................................................................ 26 4.2 WANSetup .......................................................................................................................................................... 27
5 LANSetup ........................................................................................................................................................... 30 5.1 EthernetandUSBLAN ......................................................................................................................................... 30 5.2 LANconfiguration................................................................................................................................................ 30 5.3 DHCPserver ......................................................................................................................................................... 31 5.4 DialupNetworking(DUN)overserial ................................................................................................................. 31
6 IPNetworkingFeatures ....................................................................................................................................... 33 6.1 Portforwarding ................................................................................................................................................... 33 6.2 DMZ ..................................................................................................................................................................... 34 6.3 IPpassthrough.................................................................................................................................................... 35 6.4 DynamicIPregistration ....................................................................................................................................... 36 6.5 IPSecurity(IPSEC)................................................................................................................................................ 37 6.6 AccessControlList(ACL)...................................................................................................................................... 37 6.7 Passwordprotection............................................................................................................................................ 37
7 SerialIP ............................................................................................................................................................... 39 8 GPS ..................................................................................................................................................................... 40 8.1 GPSprotocols ...................................................................................................................................................... 41 8.2 Storeandforward................................................................................................................................................ 41 8.3 Odometer ............................................................................................................................................................ 42 8.4 ConfiguringthemodemforGPSreporting.......................................................................................................... 42
9 I/OManagement................................................................................................................................................. 43 9.1 DigitalOutputcontrol.......................................................................................................................................... 43 9.2 DigitalInputstatequery ...................................................................................................................................... 43 9.3 AnalogInputvaluequery .................................................................................................................................... 44
10 EventReporting ............................................................................................................................................. 45 10.1 Events .................................................................................................................................................................. 45 10.2 Actions ................................................................................................................................................................. 45 10.3 Reports ................................................................................................................................................................ 46
11 HardwareInstallation .................................................................................................................................... 47 11.1 MountingtheBT5x00v2seriesmodem ............................................................................................................. 47 11.2 MountingtheBT6000seriesmodem................................................................................................................. 47
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
6
1.8 March 30, 2010
11.3 Cellularantenna................................................................................................................................................... 47 11.4 Ethernetcable ..................................................................................................................................................... 49 11.5 USBcable ............................................................................................................................................................. 49 11.6 Serialcable........................................................................................................................................................... 49 11.7 Powersource ....................................................................................................................................................... 49
12 Appendixes.................................................................................................................................................... 51 12.1 BlueVueDeviceManagerTroubleshooting......................................................................................................... 51 12.2 ActivationTroubleshooting ................................................................................................................................. 55 12.3 Troubleshooting .................................................................................................................................................. 58 12.4 FirmwareUpgrades ............................................................................................................................................. 62 12.5 SendingATCommands........................................................................................................................................ 64 12.6 DialUpNetworkinginWindows ......................................................................................................................... 66 12.7 Warranty.............................................................................................................................................................. 68 12.8 CustomerSupport ............................................................................................................................................... 69
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
7
1.8 March 30, 2010
FiguresFigure1Routermode ........................................................................................................................................................... 8 Figure2IPpassthroughmode............................................................................................................................................. 9 Figure3Serialconnector(lookingatbackofmodem) ...................................................................................................... 20 Figure4Thedifferentwaystoconnecttoamodem......................................................................................................... 22 Figure5Connectingtoaremotemodem.......................................................................................................................... 23 Figure6Confirmingthesuccessofactivation ................................................................................................................... 27 Figure7Editingtheaccountinformation .......................................................................................................................... 28 Figure8Testingtheconnection......................................................................................................................................... 29 Figure9DefaultLANIPconfiguration................................................................................................................................ 30 Figure10SamplemodemconfigurationforcommunicatingwithadevicethathastheIP10.127.0.17 ......................... 31 Figure11Portforwardingentries...................................................................................................................................... 34 Figure12EnablingDMZ ..................................................................................................................................................... 35 Figure13EnablingIPpassthrough..................................................................................................................................... 35 Figure14EnablingDynamicIPRegistration ...................................................................................................................... 37 Figure15Enablingpasswordprotection ........................................................................................................................... 38 Figure16SerialIP............................................................................................................................................................... 39 Figure17GPSconfigurationscreen ................................................................................................................................... 40 Figure18Modemwithgoodsignalstrength ..................................................................................................................... 55 Figure19PhonenumberbeingdisplayedontheModemDiagnosticscreenafteractivation ......................................... 56 Figure20WANIPbeingdisplayedafterthemodemsuccessfullyconnectstothecellularnetwork ............................... 57 Figure21Upgradingthefirmware..................................................................................................................................... 63 Figure22CreatinganewconnectioninWindowsXP ....................................................................................................... 66
TablesTable1Modemfeatures...................................................................................................................................................... 9 Table2Generalspecifications ........................................................................................................................................... 11 Table34pinMolexconnector(BT5000v2) ...................................................................................................................... 15 Table44pinMolexconnector(BT6x00) .......................................................................................................................... 15 Table54pinscrewterminal(BT6xx1) .............................................................................................................................. 16 Table6DC2.5mmBarreladapter(BT6000) ..................................................................................................................... 16 Table7Powerconsumption .............................................................................................................................................. 17 Table8LEDs ....................................................................................................................................................................... 19 Table9Resetbuttonfunctions .......................................................................................................................................... 20 Table10DHCPIPassignment ............................................................................................................................................ 30 Table11NMEAmessagesinformation .............................................................................................................................. 41 Table12dBlossper100feetofcabletype ....................................................................................................................... 47
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
8
1.8 March 30, 2010
1 ProductOverview1.1 IntroductionThe BlueTree 5000v2 and 6000 series modems are rugged cellular modems built to provide simple and reliablecommunicationover aCDMAorGSM cellulardatanetworks. They are typicallyused in applications such asPublicSafety,Transportation,VehicleTracking,Telemetry,SCADA,Remote /TemporaryOffices,LandlineReplacement, andWANbackup/BusinessContinuity.Themodelscoveredbythisdocumentare:
Type CDMAEvDO.A GSMEDGE GSMHSPA
StandaloneGPS BT5600v2 BT5800v2
4pinpowerconnector BT6600 BT6800
Screwblockpowerconnector BT6601 BT6401 BT6801
PoEpowerinput BT6601EB BT6401EB BT6801EB
EthernetSwitch BT6621 BT6421 BT6821
Themodemsupportstwooperationalmodes:routermode,andIPpassthroughmode.
1.1.1 RoutermodeInRoutermode,whichisthedefaultmode,themodemmanageslocalandwirelessconnectionsindependently,and iscapableofroutingdatapacketsbackandforthbetweenthetwo.
Figure 1 - Router mode
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
9
1.8 March 30, 2010
Themodemmanagestwoconnectionsatthesametime,thusactingasagateway/router:
Cellular WAN connection: This is the Wide Area Network connection to the cellular network/Internet. The modem can be configured to automatically and autonomously establish a packet data connection to the cellular carrier and acquire a WAN IP address.
LANconnection: This is the local connection between the modem and any device attached to its Serial / Ethernet / USB ports. In the case of Ethernet and USB, the modem acts as a DHCP server and assigns a private LAN IP address to the attached device.
Themodemthenroutespacketsbackandforthbetween itsWANandLANconnections,and inturnallowsthe locallyattacheddevicetocommunicatewithcomputersordevicesataremotelocation.
1.1.2 IPpassthroughmodeIn IPpassthroughmode, themodemassigns itsWAN IPaddressdirectly to theattachedhost, thusbecominga fullytransparentactorinthecommunicationprocess.ThemodemremainsreachablethroughitsreservedTCPandUDPportssothatremoteadministrationandconfiguration isstillpossible.Notethatthismodeallowsonlyone IPaddresstobeassignedtothefirstconnecteddeviceviaDHCP(ThisconfigurationisnotrecommendedforBT6x21).
Figure 2 - IP pass-through mode
1.2 Modemfeatures
Table 1 Modem features
3 different data connection interfaces Serial/RS-232/COM, Ethernet, and USB
Ethernet switch Available on the BT-6x21 models only. These models have an embedded 5-port Ethernet switch.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
10
1.8 March 30, 2010
Power-over-Ethernet
Models ending in EB (BT-6x01EB) are models with built in power sourcing. Power-over-Ethernet compatible devices can be powered simply by connecting it to the modems Ethernet port.
Autonomous & persistent connection
management
Fully integrated TCP/IP protocols allow the modem to connect autonomously to the packet network (Internet). This feature enables capabilities such as: in-call diagnostic, Serial-IP, stand-alone GPS, remote configuration and remote firmware upgrades.
DHCP server The modems DHCP server allows easy administration and setup of the local network by automating IP address assignment
IP pass-through
The modem can assign its WAN IP address to the attached host, thus disabling the DHCP servers Network Address Translation. Even when performing pass-through, the modem remains reachable for remote administration through its reserved TCP ports.
IP security The modem can be configured with up to 10 IPSEC tunnels for increased security in communications.
In-call diagnostic The user can get modem status information while in a data call, without interrupting the data session
Serial IP
The modem can provide a reliable means of communication with serial-only legacy devices. It can encapsulate data coming from the serial port into a TCP or UDP packet and send it to a remote server on the packet network or Internet. It can decapsulate IP packets coming from the network and send raw data to the serial port.
Remote configuration The modem can be remotely configured or diagnosed using BlueVue Device Manager or a terminal session
Remote firmware upgrade
The modems firmware can be remotely upgraded using BlueVue Device Manager software
Password protection The modems configuration can be protected from tampering by requesting the user to enter a password before the existing modem configuration can be viewed or modified
Integrated GPS receiver
BT-5000v2 models include a GPS receiver for Automatic Vehicle Location (AVL). The modem can report this positioning data locally to any of the local data interfaces (serial, Ethernet, or Ethernet-over-USB), and/or remotely to a predefined server (see stand-alone).
Standalone GPS BT-5000v2 modems can be used for remote asset tracking by sending GPS data to a remote server without the need for a client application or computer connected to the modem.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
11
1.8 March 30, 2010
Store and forward
If a unit loses its connection to the cellular network, the event data being collected from I/O, GPS and other sources will be stored in memory and automatically forwarded when the connection is reestablished. This is available when using TCP or UDP with ACK.
Inputs and outputs
Sensors can be connected to the I/O ports of the modem. Depending on models, the modem is capable of monitoring up to four digital inputs for any change in state, and up to three analog inputs for changes in gradient data sources. The modem also has up to three digital outputs that can be used to remotely trigger relays. The inputs and outputs can be used with the event reporting protocol to allow automatic reports and triggers.
Event reporting
The modem can send a report to up to 10 destinations when a user-defined event is triggered. Up to 30 events can be defined based on I/O signals, GPS data, RF status. The modem has an embedded event reporting protocol that automatically formats the messages reported to the remote server.
Mobile Originated Management
The modem can connect to a remote server and perform management actions (firmware upgrade, configuration changes ). This feature uses Event Reporting.
Partner apps The modem can host partner applications used for example to report cellular traffic usage, vehicle diagnostics, alarms,
1.3 Specifications
1.3.1 GeneralspecificationsTable 2 General specifications
Wireless interfaces
CDMA EvDO.A models Dual-band CDMA2000 EVDO Rev. A (with diversity) Backward compatible with 1xRTT and IS95 GSM EDGE Models Quad-band 850/900/1800/1900 GSM Backward compatible with Quad-band GPRS/UMTS GSM HSPA Models Quad-band 800/850/1900/2100 MHz WCDMA (with diversity) HSDPA/HSUPA/HSPA Backward compatible with GPRS/EDGE/UMTS
Peak data rates Download: CDMA 3.1Mbps / EDGE 384 kbps / HSPA - 7 Mbps Upload: CDMA - 1.8 Mbps / EDGE 120 kbps / HSPA - 5.76 Mbps
Serial interface 1x RS-232 Serial DB9 115200bps
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
12
1.8 March 30, 2010
USB interface BT-5000v2 series: 1x USB 2.0 type B BT-6000 series: 1x USB 2.0 mini B
LED indicators Power, WAN, Signal, RS232, GPS, Ethernet Link & Activity
Dimensions BT-6x0x: 120 x 96 x 32 mm (4.7 x 3.77 x 1.25"), 453g (1.0 lb) BT-6x21: 120 x 96 x 51 mm (4.7 x 3.77 x 2.00"), 500g (1.1 lb) BT-5x00v2: 159 x 127 x 53 mm (6.26 x 5.00 x 2.09), 500g (1.1 lb)
Power Input 8 - 30 VDC (12 VDC nominal), Power over Ethernet on BT-6x01EB
Power consumption See Table 6
Environmental
BT-5000v2 series Operating Temp: -40 to +85C (-40 to 185F) Shock & Vibration: MIL-STD 810F/202G Humidity: 5 to 95% non-condensing BT-6000 series Operating Temp: -40 to +75C (-40 to 167F) Shock & Vibration: IEC68-2-27, IEC68-2-6, MIL-STD 810F/202G Humidity: 5 to 95% non-condensing
Certification
Hazardous Locations - Class I, Div. 2, Groups A,B,C,D, UL1604 Electrical Safety - UL508/CSA22.2/14 (CUL) EMC- FCC, part 15 and Industry Canada, ICES-003 PTCRB (GSM), CE, R&TTE
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
13
1.8 March 30, 2010
1.3.2 MechanicalspecificationsBT5x00v2
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
14
1.8 March 30, 2010
1.3.3 MechanicalspecificationsBT6000
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
15
1.8 March 30, 2010
1.3.4 PowerspecificationsandconsumptionPowerissuppliedtothemodemvia:
4-pin Molex connector for the BT-6x00 and BT-5x00v2 models 4-pin screw terminal for the BT-6x01, BT-6x01EB and BT-6x21 models DC 2.5mm barrel plug for all BT-6000 models Power over Ethernet for all BT-6x01EB models
1.3.4.1 4pinMolexConnector(BT5000v2)Power issuppliedtothemodemviathe4pinMolexconnectorontherearpanelforBT5x00v2models.Thepinsaredescribedasfollows:
Table34pinMolexconnector(BT5000v2)Pin Name Description1 GND Ground2 POS Powersupplyinput(8to30VDC)3 IGN Ignitionsenseinput(switchesmodemonoroff)
Powerconnector(facingmodem)
4 O3 DigitalOutput3
1.3.4.2 4pinMolexConnector(BT6x00)Powerissuppliedtothemodemviathe4pinMolexconnectoronthefrontpanelfortheBT6x00models.Thepinsaredescribedasfollows:
Table44pinMolexconnector(BT6x00)Pin Name Description1 GND Ground2 POS Powersupplyinput(8to30VDC)3 IN Digitalandanaloginput
OUT IN
GND POS
Powerconnector(facingmodem)
4 OUT DigitalOutput
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
16
1.8 March 30, 2010
1.3.4.3 4pinScrewTerminal(BT6xx1)Power issuppliedtothemodemviathe4pinScrewTerminalonthefrontpanelfortheBT6xx1models.Thepinsaredescribedasfollows:
Table54pinscrewterminal(BT6xx1)Pin Name Description1 GND Ground2 PWR+ Powersupplyinput(8to30VDC)3 OUT Digitaloutput
Powerconnector(facingfront)
4 IN Digitalandanaloginput
1.3.4.4 DC2.5mmBarrelAdapterPowerissuppliedtothemodemviathebarreladapterontheleftsideofallBT6000seriesmodems.Thecontactsaredescribedasfollows:
Table6DC2.5mmBarreladapter(BT6000)Pin Name Description
Sleeve GND Ground
Powerconnector(facingleftside)
Tip PWR+ Powersupplyinput(8to30VDC)
WARNING:
DC2.5mmBarrelAdaptershallnotbeusedinhazardouslocations.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
17
1.8 March 30, 2010
1.3.4.5 PowerspecificationPowerinputtothemodemisprotectedagainstreversepolarityandovervoltage.Themodemspowerconsumptionisasfollows:
Table7Powerconsumption
DrawinmA(at12VDC)
Model
Standby Transmitting Peaks
BT-5600v2 123 221 452
BT-5800v2 123 328 810
BT-6401 115 246 417
BT-6421 229 360 531
BT-660x 115 213 444
BT-6621 249 347 578
BT-6800 115 320 802
BT-680x 115 320 802
BT-6821 249 454 936
WiringinstructionsareprovidedintheHardwareInstallationsection.Allmodems are equippedwith protection for reversed polarity and power surges over 33 volts. Themodems areequippedwithan internal3Amp fuse. Whenusing the4pinMolexconnector /poweraccessorycable suppliedbyBlueTreeWireless,anextra2Ampfuseisalsoincluded(5600v2,5800v2).
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
18
1.8 March 30, 2010
1.3.5 Modemviews
StandaloneGPS
BT5x00v2
BT5600v2 BT5800v2
4pinpowerconnector
BT6x00
BT6600 BT6800
Screwblockpowerconnector
BT6x01
BT6401* BT6601 BT6801
Screwblockpowerconnector&
PoEpowerinput
BT6x01EB
BT6401EB* BT6601EB BT6801EB
EthernetSwitch
BT6x21
BT6421* BT6621 BT6821
TheBT64xxseriesmodemsarenotequippedwithadiversityantennaconnector
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
19
1.8 March 30, 2010
1.3.6 IndicatorsLights(LED)
Table 8 LEDs
LED Status Corresponding State
OFF Modem is powered off
ON Modem is powered on Power
FLASH Firmware error
OFF No signal available or signal strength is below -100 dBm
ON Excellent signal strength = greater than -69 dBm
Fast: Every 300ms = -79 to -70 dBm
Medium: Every 600ms = -89 to -80 dBm
Signal
FLASH
Slow: Every 1200ms = -99 to -90 dBm
OFF Cellular connection is not established
ON Cellular connection is established - no network data activity WAN
FLASH Cellular connection is established - with network data activity
OFF Serial connection is not established
ON Serial connection is established - no data activity with host RS232
FLASH Serial connection is established - with data activity with host
OFF NopositionfixavailableGPS
(BT5x00v2) ON Positionfixavailable
1.3.7 DataInterfaceSpecifications:Serial,Ethernet&USB1.3.7.1 EthernetPortThemodem's10/100MbpsEthernetportiscompliantwiththeEIA568standard.ThemodemsportsareautosensingsotheycanbeusedwitheitherastraightorcrossoverRJ45cabletoconnecttohostports.TheBT6x21featuresa5portEthernetswitchallowingconnectivitytomultiplelocaldevices.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
20
1.8 March 30, 2010
1.3.7.2 USBDevicePortThis isaUSB2.0Device interfaceonaTypeB (BT5x00v2)orMiniB (BT6xxx)connector. ItoffersEthernetoverUSBfunctionalityusingtheRNDISdriverforWindowsXPandWindowsVistaOperatingsystemsonly. TheBlueTreeRNDISdrivermustbeinstalledbeforetheUSBinterfacecanbeused.ThedriverisautomaticallyinstalledwithBlueTreeDeviceManageroryoucanobtainthedriveratwww.sixnet.comandinstallitmanually.1.3.7.3 SerialPort(DB9)Themodemsserialport isanRS232DCE,compliantwithEIA232standard.Theconnectorused isDB9 femaleand isshownintheillustrationbelow.
Figure 3 Serial connector (looking at back of modem)
Forfurtherserialwiringinformation,refertotheHardwareInstallationsection.
1.3.8 RESETbuttonfunctionsTable 9 Reset button functions
Mode Pattern Description
Hard reset Press and hold for less than 3 seconds Standard reboot
Factory restore Press and hold between 3 and 10 seconds RS232 LED flashes quickly
Overwrites user configuration with the default factory settings
FW upgrade Press and hold between 10 and 15 seconds WAN LED flashes quickly
Puts the modem in advanced firmware upgrade mode by restarting the modem and running the bootloader only. Do not use this mode unless instructed to by BlueTree Technical Support.
USB pass-through Press and hold for longer than 15 seconds Signal LED flashes quickly
Puts the modem in main pass-through mode to the RF module, allowing CCT provisioning and PST support. Do not use this mode unless instructed to by BlueTree Technical Support.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
21
1.8 March 30, 2010
2 BlueVueDeviceManager(BVDM)TheBlueTreeBT5000v2andBT6000seriesmodemscanbeconfiguredusingBlueVueDeviceManagerversion1.76orlater.Thissoftwareapplicationisavailableasafreedownloadatwww.sixnet.com.Latersectionsofthisguidewillrefertoconfigurationoptions in thissoftware.Formore indepth informationonusingBVDM,refer to theBlueVueDeviceManagerUser'sGuide.ItcanbeaccessedfromwithinBVDMitselfbyclickingtheHelpbutton,ordownloadedseparatelyatwww.sixnet.com.BVDMisaGraphicalUserInterfaceformodemconfigurationandadministrationthatallowstheuserto:
Activate the modem (program account information) for use on the cellular network Register the modem on the cellular network (WAN Setup) Configure operation parameters (such as LAN setup or GPS) Monitor diagnostic and status information Perform firmware upgrades to the modem
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
22
1.8 March 30, 2010
2.1 Connectingtothemodem
Should you run into any issues connecting to the modem, refer to the BlueVue Device Manager Troubleshooting appendix.
ClickonTools>Settings>ConnectiontabtoselecttheinterfaceyourPCwillusetoconnecttothemodem.
Figure 4 The different ways to connect to a modem
2.1.1 Usingaserialcable:1) Select Serial
2) Select the COM port in the dropdown list, then click OK
2.1.2 UsinganEthernetorUSBcable:3) Select Modem IP
4) Enter the appropriate modem IP then click OK. By default, the DHCP-assigned IPs will be 192.168.0.1 for Ethernet and 192.168.111.1 for USB. If using USB, the BlueTree RNDIS driver must be installed as explained in the Data Interface Specifications section.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
23
1.8 March 30, 2010
2.1.3 Connectingtoaremotemodem:5) Select Remote Configuration and click OK. A new panel will open to the left of BlueVue
Device Manager.
6) Right-click Available Modems in the panel
7) Click Add
8) Enter the modems information, then click OK. The description is optional.
9) The modem will be added to the list of Available Modems, which will be saved for easy access in the future. Double-click the modem name in order to connect to it.
Figure 5 Connecting to a remote modem
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
24
1.8 March 30, 2010
2.2 Softwareoverview
ModemDiagnosticThisscreendisplaysvarioustechnicalinformationpertainingtothemodem'sstate.
ModemConfigurationThis screen allows the user to configure the modem to suit the applicationrequirements.
ModemActivationThisscreeniswheretheuserperformscellularaccountactivationsothatthemodemmayconnecttothecellularnetwork.
ModemWANSettingsThisscreenallowstheusertosettheconnectionprofileonthemodem,suchastheusernameandpasswordoftheaccount.
ModemGPSThis screen allows the user to configure themodem for basicGPS reporting (BT5x00v2only).
HelpThis button opens the BlueVue Device Manager User's Guide, a document thatexplainseveryparameterofBlueVueDeviceManagerindetail.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
25
1.8 March 30, 2010
3 ATCommandsTheBlueTreeBT5000v2andBT6000seriesmodemscanbeconfiguredandmanagedusingATcommands.ATisacommandlineinterfaceallowingfullcontroloverthemodemfunctionalitiesanddiagnostics.TheATcommandsaredescribedintheATcommandreferencedocumentavailablefromwww.sixnet.com.ATcommandsallowforthecreationofconfigurationscriptsusedtoconfigureafleetofmodemswiththesamesettings.TheATcommandinterfacemaybeprotectedbyapassword.
3.1 AccessATcommandsinterfaceisaccessiblevia:
- themodemserialport(whennotinDUN,SerialIPorSerialpassthrough).Thedefaultserialsettingsare:o 115200baudso 8bitsdatao noparityo onestopbito hardwareflowcontrol
- aTCP/IPconnectiontoport6070over:o LANEtherneto LANUSBo WAN(remoteaccess)
Themodemacceptsup to twoconcurrentTCP/IPconnections toport6070 (inaddition to the serialport).Whenanadditionalconnectionisattempted,theidlestconnectionisdropped.AterminalemulationapplicationsuchasHyperterminal,PuTTYorteratermisrequired.Terminalemulationapplicationscanbefreelydownloadedfromtheinternet.ForTCP/IPaccess,terminalemulationsoftwareoratelnetclientsoftwarecanbeused.Pleasereferto12.5SendingATCommandsformoredetails.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
26
1.8 March 30, 2010
4 Activation&WANSetup
4.1 Activation(CDMAmodemsonly)Amodemmustbeactivatedandconfiguredbeforeitcanbeusedonthecellularnetwork.Thestepsbelowoutlinehowtoactivateamodem.Toconfigurethemodemtoconnecttothewirelessnetworkafteractivationhasbeenperformed,skiptothenextsection.
4.1.1 ObtainingacellularaccountforthemodemContactacellularserviceproviderorcellulardealerandrequestaCDMAaccountwiththepacketdataserviceoptionfor1xRTT,1xEVDO,or1xEVDORev.A.TheproviderwillrequiretheElectronicSerialNumber(ESN)ofthemodem.TheESN is located on the label under the modem as well as on the modems packaging box.Thecellularserviceproviderwillthenprovidetheinformationrequiredtoactivatethemodem.
IMPORTANT Ask your cellular service provider whether the carrier blocks incoming connections. If they do, you will be unable to communicate with the modem remotely unless you ask the service provider to allow incoming connections to your applications TCP and UDP ports. If possible, ask them to open the following ports as well: TCP 20 and TCP 21 (used for firmware upgrades), TCP 5070 (used by BlueVue Device Manager), and TCP 6070 and 6073 (used for AT command configuration and troubleshooting).
4.1.2 ProgrammingtheaccountinformationintothemodemThe steps required toprogram theaccount information into themodemareunique toeachcarrier.TheQuickStartGuidebookletincludedinthemodempackagecontainsastepbystepwalkthroughforactivatingthemodem.ThelatestversionoftheQuickStartGuideisalsoavailablefordownloadathttp://www.sixnet.com/.
4.1.3 ConfirmingthesuccessofactivationOncetheactivationprocessaboveiscomplete,navigatetoWAN(WANSettings).ThemodemsphonenumbershouldbedisplayedatthetopleftasshowninFigure6.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
27
1.8 March 30, 2010
Figure 6 Confirming the success of activation
4.2 WANSetupAfterthemodemhasbeenactivated,itmustbeconfiguredinordertoauthenticateforusewiththecellularnetwork.
4.2.1 EntertheaccountinformationNavigatetoWAN(WANSettings)toconfiguretheWANconnectiononcethemodemhasbeenactivated.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
28
1.8 March 30, 2010
Figure 7 Editing the account information
1) Enter the Dial String:
#777 for CDMA modems *99# for HSPA modems (Bell Mobility and Telus) *99***1# for other GSM modems (EDGE and HSPA)
2) Enter the User Name and Password if provided by your cellular carrier otherwise, leave them empty.
3) Select Always On or On Demand (explained below) depending on the desired connection initiation behavior.
4) Enter APN information that was provided to you if you are using a GSM modem. The APN field is only shown when BVDM is connected to a GSM (EDGE and HSPA) modem.
WhenthemodemissettoAlwaysOn,itwillattempttomaintainapermanentconnectiontothecellularnetworkonitsown.Mostapplicationswillrequirethemodemtoberemotelyaccessibleatanytime,andwillrequirethemodemtobesettoAlwaysOn.When themodem is set toOnDemand, themodemdoesnot connect to the cellularnetworkunless told toby theattached terminal. Ifdisconnected from thecellularnetwork, itwillnotattempt to reconnect.ThemostcommonOn
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
29
1.8 March 30, 2010
DemandscenarioiswhenusingtheserialportinordertoestablishaPPPsessionthroughaDialUpNetworking(DUN)connection.UnlessyouaresurethemodemshouldbesettoOnDemand,themodemshouldbesettoAlwaysOn.
4.2.2 TestingtheconnectionOnceyou'vefinishedenteringthesettings,andonceaconnectionisestablished(dependingontheconnectioninitiationbehaviordescribedabove),navigatetoDIAG(ModemDiagnostic)andclickonRefreshbutton:themodemsWAN IPshouldbedisplayedasoutlinedinFigure8.ThisistheIPaddressthathasbeenassignedtothemodembythecellularcarrier.Atthistime,themodemsWANlightwillstayonaslongastheconnectionismaintained.Notes:
HSPA/EDGE:noactivation isrequiredsincealltheconnectionandnetwork information iscontained intheSIMcard.
HSPA/EDGE:PleasenotethatthemodemneedstoberesetafteraSIMcardisinserted. Please note that some carriers prefer to have themodem phone number hidden. In this case, the
modemphonenumberisnotdisplayedinBVDM.
Figure 8 Testing the connection
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
30
1.8 March 30, 2010
5 LANSetup5.1 EthernetandUSBLANComputersanddevicesthatusethemodemsEthernetandUSBconnectivityexperiencemuchhighertransferspeedsandtheyemployallthebenefitsofTCP/IPcommunication.
5.2 LANconfigurationWhetheranEthernetorUSBcable isused, it isessentialthatboththemodemandtheattacheddevicebewithinthesameLAN subnet for IPcommunication to takeplace.Bydefault, themodemhasaDHCP server running,whichwillinitiallyassignthefollowingIPaddresstotheattacheddevice(providingthedeviceissettouseDHCP):
Table 10 DHCP IP assignment
Modem IP Host IP
Ethernet 192.168.0.1 192.168.0.4
USB 192.168.111.1 192.168.111.20
Figure 9 Default LAN IP configuration
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
31
1.8 March 30, 2010
Iftheattacheddevicemustuseaspecific(static)IP,thenthemodem'sLANconfigurationmustbechangedsothatthemodem'sIP lies inthesamesubnetasthedevice.NavigatetoCONF(ModemConfiguration)>LANIPandchangetheparametersunderEthernetorUSB.
Figure 10 Sample modem configuration for communicating with a device that has
the IP 10.127.0.17
5.3 DHCPserverAsmentionedabove, themodemhasaDHCP serverwhichautomaticallyassignsan IP to theattacheddevice. IfanEthernethuborswitchisconnectedtothemodemsEthernetport,themodemwillassignanIPaddresstoeachdeviceconnected to thehuborswitch, foramaximumof254devices,provided thedevicesareconfiguredasDHCPclients(Dynamic or Automatic IP configuration). The DHCP server can be configured or turned off in CONF (ModemConfiguration)>LANIPasshownabove.
5.4 DialupNetworking(DUN)overserial
Note: Regardless of the modem type, using a serial cable will cap the bandwidth at 115200 kbps. The serial port will be a bottleneck in terms of performance, as it will reduce the data throughput considerably to less than 3% of its maximum potential. Whenever possible, use an Ethernet or USB connection to take full advantage of throughput.
SometerminalsdonothaveRJ45EthernetorUSBconnectorsandrequireusingaDB9RS232standardserialconnectortointerfacewiththemodem.
If the attached device is not programmable (smart), then you cannot use DUN, and will have to use the Serial IP feature to communicate with the device. Refer to the Serial IP section for details.
If the modem will be used with a programmable device that can make PPP connections, then refer to that device's documentation to create the dial-up session. The phone number to dial will be the same as the one programmed in the Dial String of the WAN setup. The username and password, if any, will be those provided by your cellular service provider.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
32
1.8 March 30, 2010
If the modem is used with a PC making a PPP connection, then a standard modem driver on the COM port to which the modem is physically connected must be installed, and then a dial-up connection running on that driver must be created. This dial-up connection will dial the modem so that a PPP session is established between modem and PC. Meanwhile, the modem will make a PPP session of its own to connect to the network. For a walkthrough on creating a DUN connection in Windows, refer to the Dial-Up Networking in Windows appendix.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
33
1.8 March 30, 2010
6 IPNetworkingFeaturesAsmentionedpreviously,themodemacquiresanexternalpublicorprivateIPaddress(WANIP,orWideAreaNetworkIP)fromthecellularnetworkuponestablishingaconnection.Aremoteusercancommunicatewiththemodemorahostbehindthemodem;howevertheappropriateportforwarding,DMZor IPpassthroughandLAN IPconfigurationmustbesetonthemodem.Readonforadescriptionofeachconfigurationoption.
Some carriers disable remote access as a security measure. If you are certain that the modem is on the cellular network (i.e., it has acquired a WAN IP) and that the local network is set up properly, but you cannot reach the modem remotely, confirm with the carrier that incoming IP data traffic is allowed on the required TCP or UDP port. Read the BlueVue Device Manager Troubleshooting section for more details.
6.1 PortforwardingSince the modem is a network address translation (NAT) enabled router, the remote computer connecting to themodemscellularWANIPcannotaccessdevices/serversonthemodemsLANifthemodemisnotspecificallyconfiguredto forward theappropriateports to the LANdevices/servers.Portforwarding,or tunneling, is theactof relayinganincomingpackettooneormorelocaldestinationsdependingontheport(s)throughwhichthepacketcame.ThemainuseofportforwardingistoallowanexternalusertoreachaportonaprivateIPaddressfromtheoutsideviaaNAT.Thisallows remotecomputers toconnect toaspecificcomputerwithinaprivateLAN,dependingon theportusedtoconnect.Tosetupthemodem'sportforwardingrules,navigatetoCONF(ModemConfiguration)>PortForwarding/DMZ.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
34
1.8 March 30, 2010
Figure 11 Port-forwarding entries
TheWANPort is thedestinationportnumberusedby the remote computerand the LANPort iswhere thedata isforwardedto.TypicallytheWANportandLANportarethesame;howeveranyportcanbeusedontheWANside,aslong as it points towards the correct LAN port. Select the appropriate protocol (TCP orUDP), and submit the newsettings.
6.2 DMZThisfeature,whenenabled, instructsthemodemtoportforwardall incomingtraffictoasingle IPdestinationontheLAN.Anexceptionwillbemadefortrafficcomingontheportsdesignatedbytheportforwardingrules(thiswouldbeports9000,23,and777 inFigure11).ThisexceptioncanbeoverriddenbycheckingtheDMZoverridesallforwardedportsbelowcheckbox.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
35
1.8 March 30, 2010
Figure 12 Enabling DMZ
DMZisidealinsituationswherethereisalreadyaserverontheLANthathandlesportforwarding,asitavoidshavingtoreprogramalltheportforwardingrulesintothemodem.Itisalsopracticalwhentheuserdoesnotknowwhichportshislocaldevicelistenson,andjustwantseverythingtoworkwithminimalconfiguration.DMZcanbeenabledatCONF(ModemConfiguration)>PortForwarding/DMZ.
6.3 IPpassthrough
Note When IP pass-through is enabled, both port-forwarding and DMZ are disabled.
Whenthisfeatureisenabled,themodemwilldisableNATandassignitsWANIPaddresstotheattachedhost.ThiswillsolveVPNauthenticationissuesthatarecausedbyNAT.ThemodemwillremainreachablethoughitsreservedTCPandUDPports.ToenableIPpassthrough,navigatetoCONF(ModemConfiguration)>LANIPandselectthedatainterfacetoperformpassthroughon,thenchecktheEnableIPPassthroughcheckbox.
Figure 13 Enabling IP passthrough
Ifthehost isattachedtothemodemviaanEthernetcable,thenthehostmusthaveDHCPenabled (i.e., itshouldbeperformautomatic IPnegotiation insteadofusingapredefinedstatic IP). If thehost isattached to themodemviaaserialcable,IPpassthroughwillonlyactivatewhenthehostcreatesaPPPsessiontothemodem.
Once IP pass-through is enabled the default IP settings will alter as follows:
RouterMode IPPassthroughModeHostIPAddress 192.168.0.4 aaa.bbb.ccc.ddd(WANAddress)
ModemIPAddress 192.168.0.1 aaa.bbb.ccc.1or.2(ifddd=1)
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
36
1.8 March 30, 2010
Note Enabling or disabling IP pass-through reset the concerned interfaces and may stop established connections (e.g. BlueVue Device Manager). To work around this issue, do not enable/disable IP pass-through on the interface used for the device configuration.
Note This mode allows only one IP address to be assigned to the first connected device via DHCP (This configuration is not recommended for BT-6x21).
6.4 DynamicIPregistrationThis featureallows themodem to reportamessage toauserconfigurable IPaddressevery time itsWAN IPaddresschanges.ItisusefulwhenthecellularaccountisassociatedwithadynamicIPaddress.SincetheWANIPaddresswillbechangingregularly,itwillbeimpossiblefortheusertoknowwhichWANIPaddressisassignedtothemodem.WithDynamicIPRegistrationenabled,themodemwillnotifyaremoteserverofthenewWANIPaddressaswellasthemodemsESNinhexadecimalformat.TheIPRegistrationpacketcanbesentusingeitherTCPorUDP.ToconfigureDynamic IPRegistration,navigatetoCONF(ModemConfiguration)>General,andsetthedestination IPaddressandport.Theregistrationtimerisavalue(inminutes)thatcontrolshowoftenthemodemshouldreportitsIPtotheserver. If it issettozero,themodemwillreport itsWAN IPaddressuponbootuporuponacquiringanew IPaddressfromthecellularcarrierafterlosingthecellularconnection.Ifitissettoavaluebetween1and65535,thenitwillreportitsESNandWANIPregularlyatthespecifiedinterval.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
37
1.8 March 30, 2010
Figure 14 Enabling Dynamic IP Registration
6.5 IPSecurity(IPSEC)Themodemsupportsupto10IPSECVPNtunnelsusedtosecurecommunicationswithremoteservers.Pleaserefertothe"GettingStartedwithIPSEC"applicationnotesforfurtherdetails.
Note IP Security can only be configured and managed via AT commands.
6.6 AccessControlList(ACL)ThemodemcanbeconfiguredwithAccessControlListtopreventunauthorizedincomingIPtraffic.Pleaserefertothe"GettingStartedwithACL"applicationnotesforfurtherdetails.
Note ACL cannot only be configured and managed via AT commands.
6.7 PasswordprotectionThisfeatureallowsadministratorstorestrictunauthorizedusersfromconfiguringthemodembyrequiringapasswordwheneverthemodemsconfigurationportsareaccessed.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
38
1.8 March 30, 2010
Figure 15 Enabling password protection
Toenablepasswordprotection:
1) Navigate to CONF (Modem Configuration) > Password and check the Enable box.
2) Select the interfaces to prompt for a password on. The WAN interface (remote connections) is the most commonly password-protected interface, however some users may wish to password-protect both the WAN & LAN interfaces. Note that the modem cannot prevent configuration changes made from its serial port.
3) Finally, set the modem password. The password must be a case-sensitive string that is 6-30 characters long.
4) Click Submit to save the changes.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
39
1.8 March 30, 2010
7 SerialIPThisfeatureallowscommunicationoverthecellularnetworkintwocommonsetups.Thefirstisaservercommunicatingwith a remote serialonlydevice and theother, a serialonlydevice communicatingwith another remote serialonlydevice.SerialIP isusedtoemulateadirectserialconnectiontotheattacheddevice,ortoemulatea landlinemodem.Themodembecomesatransparentmiddlemanroutingdatabackandforthbetweenthepollerandthepollee.SerialIPismostcommonlyusedintelemetryapplicationssuchasmeterreadingandSCADAdevices.
Figure 16 Serial IP
WhenthemodemisinSerialIPmode,IPpacketsintendedfortheattachedserialdevicehavetheirIPheadersstrippedbeforebeingpassedontothedevice.Thismeansthattheserialdevicereceivesrawserialdatathatitcanunderstand.Inversely,whentheserialdeviceissendingdata,themodemencapsulatesthisdatainIPpacketstobetransmittedovertheairtotheremotedestination.When a Serial IP server is running, themodemwaitsuntil a connection ismadeon thedefined Serial IPport, thentriggersSerialIPmode.Theincomingdatawillberelayedtotheattachedserialdevice.AnyoutputfromtheserialdevicewillbesenttotheIPoftheremotecomputerthatmadetheconnectionontheportthattheremotecomputerusedtomaketheconnection.WhenusingSerialIP,themodemconfigurationdependsontheapplicationrequirements.Asupportnoteisavailable.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
40
1.8 March 30, 2010
8 GPSTheBT5600v2andBT5800v2modemshaveanembeddedGPSreceiverwhichcanbeusedtotracktheirmovement.This feature is commonly used in applications such as assettracking and Automatic Vehicle Location (AVL). ThesemodemssupporttwoGPSprotocols:theNationalMarineElectronicsAssociation(NMEA)protocolandtheTrimbleASCIIInterfaceProtocol(TAIP).Themodemcanreportthefixesacquiredfrom itsGPSreceivertothe localserialport,and/ortoanIPaddress,eitherlocal(Ethernet/USB)orremote(overtheair).Avarietyofreportingoptionsareavailable,rangingfrombasicNMEA/TAIPtimerbasedreportstointelligentconditiontriggeredreportswhichleveragethemodem'sEventReportingcapabilities.
Figure 17 GPS configuration screen
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
41
1.8 March 30, 2010
8.1 GPSprotocols
8.1.1 TAIPTAIP is configured using a single command string. Read Trimbles TAIP documentation to learn how to create acommandthatmeetsyourneeds.Themodem listensonUDPport 21000 for TAIP commands, allowing its configuration tobemodifiedon the flybysoftwareapplicationsthatsupportTAIP.ForanexampleofTAIPconfiguration,refertotheBasicGPSReportinginBlueVueDeviceManagerappendix.
8.1.2 NMEANMEAusesoneormoreofthefollowingsevenpredefined,fixedformatmessages.
Table 11 NMEA messages information
Message Contents Size
GGA Time, position, and various status information 75 bytes
GLL Latitude, longitude, and time 48 bytes
GSA GPS DOP and active satellites 63 bytes
GSV Active satellites in view 70 bytes
RMC Time, date, position, course, and speed 67 bytes
VTG Track made good and ground speed 37 bytes
ZDA Time and date 35 bytes
RefertoTrimblesNMEA0183documentationforadditionalinformation.ForanexampleofNMEAconfiguration,refertotheBasicGPSReportinginBlueVueDeviceManagerappendix.
8.2 StoreandforwardTheBT5600v2andBT5800v2modemshavean integrated512Kbytesnonvolatilememoryareadedicated tostoringGPSreportsorBlueTreeEventProtocolreports.Itcanstoreapproximately5000positionfixes(exactamountdependsontheconfiguration).Thisfeaturewillactivateautomaticallywhenthemodemcannotreachitsreportingdestination(exceptwhenreportingisprogrammedwithUDP/IPandnoACK).Themodemwillsavethereportsinitsmemorybufferuntilitisabletosendthemorwhentheyareacknowledged)ensuringthatnopositionhasbeenlost.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
42
1.8 March 30, 2010
WhenStoreAndForwardisactivated,themodemstoresGPS/EventdatainmemoryonaFirstInFirstOut(FIFO)basis.Thismeansthatifthemodemisunabletotransmitfixesoveranextendedperiodoftime,andthememorybecomesfullas a result, the newest fixes overwrite the oldest stored fixes. When the cellular connection is reestablished, themodemwillsendallthestoredfixestothedestination.Storedfixesandeventsarenotlostifthemodemisshutdownthroughignitiondelaytimer.
8.3 OdometerThe modem can keep track of the total distance traveled by aggregating the data obtained from theGPS fixes. Itcalculates the distance traveled based on a straight line between the current and previous fix. By appending thesecalculationstoatotal,themodemisabletokeeptrackofthetotaldistancetravelled.WhenusingtheNMEAprotocol,theGPSfixisupdatedeverysecond,sotheodometercanbeveryaccurate.However,whenusingtheTAIPprotocol,theGPSfixisacquiredaspertheconfiguredfixacquisitiontimer.Ifthetimerissettoahighvaluesuchas5minutes,thentheodometerwillmostlikelybeinaccurate.
8.4 ConfiguringthemodemforGPSreporting
Note If the modem is configured to report GPS fixes to a remote destination, then the reporting frequency determines the cellular network bandwidth consumption. A higher reporting frequency will result in higher bandwidth consumption. Plan carefully to ensure you do not exceed your monthly bandwidth plan.
ThemodemcanbeconfiguredtoreportGPSintwoways:Thefirst istouseBlueVueDeviceManagerforbasicGPSreporting.ThisallowseasyconfigurationoftimerbasedGPSreports. Refer to the Basic GPS Reporting in BlueVue Device Manager appendix for a stepbystep configurationexample.ThesecondistouseATcommandsforadvancedconfiguration.Thismethodismorecomplexandcantakeadvantageofthemodem'sEventReportingcapabilities(seenextsection).EventReportingallowsthemodemtoreportautomaticallywhenauserdefinedconditionismet.ReadtheEventReportingsectionfordetails.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
43
1.8 March 30, 2010
9 I/OManagementBlueTreeoffersacompletesetofATcommandstoqueryorsetitsgeneralpurposeanddedicatedinputandoutputpins.ThissectionisonlymeanttoofferabasicoutlineofhowtheusercaninteractwiththemodemsI/Os.TheactualmodemI/Odependsonthemodel.Pleasereferto1ProductOverviewfordetails.ThemodemsEventReportingfeature(explainedintheEventReportingsection)coversI/Osaswell.Thiscanallowtheautomationofqueriesand set themodem to report toa localor remotedestinationwhenan inputvalue reachesacertainthreshold,ortotakeactionandtriggeradigitaloutput.
9.1 DigitalOutputcontrolThemodemsdigitaloutput(s)canbeusedtotoggleperipheralequipmentONorOFF.Peripheralssuchaslights,sirens,valves,doorlockmechanisms,and/orignitionscanbecontrolledthroughtheseI/Os.ExampleofturningONdigitaloutput2:
AT+BDOSET=DO2,1 ExampleofturningOFFdigitaloutput1:
AT+BDOSET=DO1,0
9.2 DigitalInputstatequeryThe modem monitors its general purpose digital input(s) as well as ignition for a change in state, along with thededicatedignitioninput.ThestateoftheseinputscanbequeriedbysendingthefollowingATcommand:
AT+BDIGET? Sampleresponsefrommodem(theactualoutputdependsonthemodemmodel):
+BDIGET: DI1,0 +BDIGET: DI2,1 +BDIGET: DI3,0 +BDIGET: DI4,0 +BDIGET: IGN,1
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
44
1.8 March 30, 2010
9.3 AnalogInputvaluequeryThemodemhasa10bitAnalogtoDigitalConverter(ADC)whichallows ittomonitorallof itsgeneralpurposeanaloginput(s)forachangeinstate,alongwiththededicatedpowerinput.Thevalueoftheseinputscanbequeriedbysendingthefollowingcommand:
AT+BAIGET? Sampleresponsefrommodem(theactualoutputdependsonthemodemmodel):
+BAIGET: PWR,13.553 +BAIGET: AI1,3.056 +BAIGET: AI2,1.987 +BAIGET: AI3,0.000
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
45
1.8 March 30, 2010
10 EventReportingEventReportingiscoveredinitsowndocument,theI/OManagement&EventReportingGuide.ThissectionismeanttoprovideageneraloverviewofwhatcanbeaccomplishedwiththemodemsBlueTreeEventProtocolengine.EventReportingisusedtoprogramthemodemtoautomaticallyperformanaction(suchassendingareport)wheneverauserdefinedeventoccurs.Aneventoccurs,oristriggered,whentheconditionsthatdefineithavebeenmet.EventReportinghasthesameStoreandforwardfeatureusedbytheGPSreportingengine,asdescribed intheGPSsection.Thisensures thatnoreportsare lost if themodem loses itsconnection to thecellularnetwork:everything issavedtomemoryandforwardedwhentheconnectionisreestablished.
10.1 EventsTheeventthattriggersanactioncanbeanyofthefollowing:
A timer has finished counting down An analog input signal has reached a certain value A digital input signal has changed state WAN status
TheBT5600v2andBT5800v2modemsareequippedwithaGPS receiverand can reactupon theseadditionalGPSbasedeventtriggers:
The modem is in motion at a particular speed The modem is in motion in a particular direction (heading) The modem is unable to acquire a GPS fix The modem has traveled for a set distance The ignition (IGN) signal state
Eventscanalsobecombinedusinglogicalstatementstocreatemorecomplexevents.Forexample,acombinationofthetimerandspeedeventtriggerscoulddefineaneventthatwouldtriggerwhenavehiclehasbeenspeeding,bydefiningspeedingasmovingat60+mphformorethan10seconds.Thisprovidesagreatamountofcontrolandallowsdefiningeventsthatmeetmostifnotallpotentialrequirements.
10.2 ActionsThemodemcanperformoneormoreofthefollowingactionswhenaneventistriggered:
Change the state of one of its digital outputs Turn its radio-frequency module ON or OFF
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
46
1.8 March 30, 2010
10.3 ReportsWhenaneventistriggered,themodemcansendareporttoupto10localorremotedestinations.AllreportsarecustomformattedbytheBlueTreeEventProtocolasdefinedintheI/OManagement&EventReportingdocument,sotheyrequiresomemanipulationonthedestinationendinordertobeparsedproperly.Areportcancontainoneormoreofthefollowinginformation:
The modem's name and ESN The modem's RSSI (signal strength) The value of the analog and digital inputs The modem's odometer value (total distance traveled) A GPS report containing NMEA or TAIP data
10.3.1 ACKThemodemcanbeconfiguredtowaitforconfirmation(ACK)fromtheremoteserverthatithasreceivedthereport.Ifthisconfirmationdoesnotcome,themodemwillassumethereporthasnotbeenreceivedandwillcontinuesendingthesamereportataconfiguredintervaluntilitreceivesconfirmationofreceipt.
10.3.2 SyncflagsToeasetheparsingofthepacketsontheserver,themodemcansetasyncflaginthebeginningandendofeachpacketitsends.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
47
1.8 March 30, 2010
11 HardwareInstallation11.1 MountingtheBT5x00v2seriesmodem
Horizontally mount the modem using four #6 screws pan or fillister head onto its mounting feet
11.2 MountingtheBT6000seriesmodemThereare3differentwaystomountaBT6000seriesmodem:
Horizontally using two #6 screws pan or fillister head onto its horizontal mounting feet Vertically using two #6 screws pan or fillister head onto its vertical mounting feet Vertically using a DIN rail clip
11.3 CellularantennaTheselectedcellularantenna(s)mustmeetthefollowingspecifications:
Maximum rated gain of 3dBi for Cellular band and 4dBi for PCS band Frequency bands:
CDMA: Dual-band 800 & 1900 MHz EDGE: 850/1900/900/1800 MHz HSPA: 850/1900/2100 MHz
Nominal 50 ohm impedance Voltage Standing Wave Ratio (VSWR) less then 2.5:1 Male SMA connector
Thelengthoftheantennacablemayaffectthesignalstrength.Choosetheappropriatecabletypeandlength.Thetablebelowprovidescanhelppredeterminethelosstoexpect.
Table 12 dB loss per 100 feet of cable type
Cable type Loss per 100 feet
8216 (RG58) 31 dB
8267 (RG213) 7.6 dB
LMR-400 3.9 dB
LMR-500 3.15 dB
LMR-600 2.5 dB
LMR-1200 1.26 dB
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
48
1.8 March 30, 2010
11.3.1 InstallationandverificationWheninstallingtheantenna,followtheFCCandIndustryCanadaguidelinesandkeepthefollowinginmind:
Mount the antenna(s) at least 30 cm (12 inches) from other antennas Do not install the antenna in a closed metallic enclosure (such as a cabinet or the trunk of a
car).
Onceamodemhasa signal, theSignalLED indicatorwill start flashingaccording to the signal strength.Additionally,BlueVueDeviceManagerwilldisplaythereceivedsignalstrength(RSSI)inthetopright.Themodemshouldhaveattheveryleastonebarofsignalstrength.
11.3.2 AntennadiversityTheBlueTree5000v2and6000seriesmodemsexcept for theBT64xxserieshave twoantennaconnectorsavailable,labeledAntennaandDiversity.
Antenna: This is the main antenna that is used for data transmission. It is mandatory to have the Antenna port connected to an antenna.
Diversity: This is the diversity antenna, used to improve on the signal strength obtained from the main antenna. This antenna is not mandatory however it will improve throughput in low signal and fringe areas.
Diversity isatransmissiontechnique thatconsistsofusingtwoseparateantennastoachievethemostrobustcellularsignalpossible.Diversitywillhelpachieve fast,reliabledata throughput inapplications thatrequireahighamountofbandwidth.Togetthebestperformance,theDiversityantennashouldbeplacedataminimumof5/8ofawavelengthawayfromtheotherantenna.Therefore,theminimumspacingforantennasinthe800MHzfrequencyis5/8*13.5=8.5.Thediversityantennacanbespacedfurtherawaythanthis, ideally in incrementsof13.5:22,35,etc. Fora1900MHzonlynetwork,theoptimaldistancewouldbe5/8*6.2=4.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
49
1.8 March 30, 2010
11.4 EthernetcableIfyouareconnectingtothemodemviatheEthernetport,youwillneedastraightorcrossovercategory5cablewithtwo8pinRJ45connectorsoneachend.TovisuallyconfirmthatEthernetcablingwasdoneproperly,checktheLEDindicationontheEthernetportlocatedattherearpanelofthemodem.TheLinkLEDshouldbeonwhentherightcableisused.
11.5 USBcableThis isanEthernetoverUSBconnectionwhichbehaves likeanEthernetconnection. ItcanonlybeconnectedtoaPCwithWindowsXPorWindowsVistainstalled.IfyouareconnectingtothemodemviatheUSBport,youwillneedaTypeAplugtoTypeBplugUSBcablefortheBT5x00v2seriesmodemsandaminiTypeBplugtoTypeAplugfortheBT6000seriesmodems.InorderfortheUSBconnectiontowork,youneedtoinstalltheBlueTreeUSBdriverwhichisavailableatwww.sixnet.com.ThedriverisautomaticallyinstalledduringBlueVueDeviceManagersetup.
11.6 SerialcableThemodemhasallitsserialportpinsenabled.Ifallthepinsareenabledontheattachedserialdevice,itisimportanttoknowwhetherthedeviceisusingDTEorDCEasacommunicationmode.Themodem isaDCEdevice, sousea straightthrough serial cablebetween themodemandaDTEdevice suchasaterminal.UseaNULLmodemcableadapterbetweenthemodemandaDCEdevicesuchasanothermodem.Ifusing customwiringor if some pins aredisabled, follow the guidelinesbelow. Thewiringwill vary dependingonwhethertheattachedserialdeviceisaDTEorDCE.
11.7 Powersource
IMPORTANT Any installations involving electrical wiring and connections should be done by someone who is experienced in this field.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
50
1.8 March 30, 2010
AsdescribedinthePowerspecificationsandconsumptionsection,themodemcanbepoweredusing:
4-pin Molex connector for the BT-5x00v2 and BT-6x00 models 4-pin screw terminal for the BT-6x01, BT-6x01EB and BT-6x21 models DC 2.5mm round plug for all models except the BT-5x00v2 series PoE (Power over Ethernet) for BT-6x01EB models
WARNING DC 2.5mm Barrel Adapter shall not be used in hazardous locations.
11.7.1 PoweringupthemodemThemodemwillpowerupassoonasan8to30VDCvoltageisappliedtooneofitspowerinputsandshutsoffwhenthisinputvoltageisbelow4VDC.Inaddition,BT5x00v2modems require the IGN signal tobeON for themodem to start.WhenBT5x00v2modemsdetecttheIGNsignaltransitiontoOFF,itengagesitsshutdownafteraprogrammabledelay.
11.7.2 TestingthepowerconnectionCheckthePWRlightonthemodem:ifitisturnedonthenthemodemispowered.Ifitsoff,thenreviewtheinstallationprocedures.IfLEDindicatorsarenotaccessibletotheinstaller,acomputercanbeusedtoverifyitsfunctionalitybyrunningBlueVueDeviceManagerandattemptingtoconnecttothemodem.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
51
1.8 March 30, 2010
12 Appendixes
12.1 BlueVueDeviceManagerTroubleshootingBefore troubleshooting, download and install the latest version of BlueVue Device Manager from http://www.sixnet.com/ .
12.1.1 (ETHERNET) TheBlueVueDeviceManagermessage box displays DetectingModem at192.168.0.1indefinitely
Connect themodem toacomputerusinganEthernetcable,andopenBlueVueDeviceManager.SetBlueVueDeviceManagersconnectiontypetoIP.BlueVueDeviceManagerwillattempttoconnectto192.168.0.1bydefault.
Possiblecause#1
Thecableisdamaged.
Troubleshooting
ChecktheLinkLEDonthemodemsEthernetconnector(locatedonthebackofthemodem).IftheLEDisoff,verifythecable.
Possiblecause#2
ThecomputerslocalIPconfigurationisincorrect.
Troubleshooting
1) In Windows XP, go to Control Panel > Network Connections and select the local area connection that corresponds to the Ethernet port in the LAN or High-Speed Internet list (its usually Local Area Connection 1).
2) Right-click the connection and click Properties. Select Internet Protocol (TCP/IP) in the list and click Properties.
3) Write down the existing values in order to restore them after configuring the modem, then select Obtain an IP address automatically and Obtain DNS server address automatically. The computer will now be ready to use the modem to access the Internet.
Possiblecause#3
ThemodemisinadifferentnetworkandDHCPisdisabled.(Thisissuedoesnotapplytobrandnewmodemsatfactorysettings.Itonlyappliestomodemsthathavehadtheirconfigurationmodified.)
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
52
1.8 March 30, 2010
Troubleshooting
Followtheinstructionsbelow:
1) Connect the computer to the modem using a straight serial cable
2) Set BlueVue Device Manager to connect to the modem over the serial port by changing the connection type to Serial
3) Once the modem has been accessed, navigate to CONF (Modem Configuration) > LAN IP
4) Under Ethernet, set the Modem IP to 192.168.0.1
5) Confirm that DHCP is enabled and that the DHCP Start IP is 192.168.0.4. Set the End IP range to any value higher than 192.168.0.4. The default is 192.168.0.39.
6) Click Submit to save the changes
7) Reset the modem and restart the computer
12.1.2 (USB) The BlueVue Device Manager message box displays Detecting Modem at192.168.111.1indefinitely
Possiblecause#1
TheUSBdriverisnotinstalled.
Troubleshooting
The USB driver for Windows must be installed before the modems USB functionality can be used. Visithttp://www.sixnet.com/todownloadtheUSBdrivertheninstallit.Itmaybenecessarytorebootthecomputer.
Possiblecause#2
ThemodemhasanoldfirmwareversionwhichdoesnotsupportUSB.
Troubleshooting
TheUSB functionalitywas introduced in version 3.0of the firmware.Upgrade themodems firmware to the latestversionavailableathttp://www.sixnet.com/.AwalkthroughcanbefoundintheFirmwareUpgradesappendix.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
53
1.8 March 30, 2010
12.1.3 (SERIAL)TheBlueVueDeviceManagermessageboxdisplaysCOMxisalreadyinuse
Possiblecause
AnothersoftwareapplicationisalreadyusingtheCOMport.
Troubleshooting
Closeallapplicationsthatcouldbeusingtheserialport,includingotherinstancesofBlueVueDeviceManager,thentryagain.
12.1.4 (SERIAL) The BlueVue Device Manager message box displays Detecting modem onCOMxindefinitely,ordisplaysawarningaboutanunsupportedmodem
ExaminetheDTRLED.Ifitisoff,thenthecomputerandthemodemarenotcommunicating.
Possiblecause
Thewrongtypeofcableisbeingused.
Troubleshooting
UseastraightthroughRS232standardDB9cable.Ifusingacustommadecable,confirmthatitfollowstheinstructionsinSection11.6.Ifthecorrectcable isbeingused,thentheDTRLEDonthemodemwillturnonwhenBlueVueDeviceManagerattemptstoaccessit.
Possiblecause
BlueVueDeviceManageristryingtoconnecttothewrongCOMport.
Troubleshooting
ConfirmthatthecorrectCOMportisselectedinBlueVueDeviceManager.ItwillattempttouseCOM1bydefault,butcomputerswithbuiltindialupmodemsmighthaveCOM1assignedtothebuiltinmodeminstead.TosettheCOMportBlueVueDeviceManager shoulduse, clickonTools>Settings>Connectionandbrowse through theavailableCOMports.IftheDTRLEDturnson,thenyouwillhavefoundtherightCOMport.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
54
1.8 March 30, 2010
12.1.5 (SERIAL) The BlueVue Device Manager message box displays Detecting modem onCOMxandthenModemisnotresponding
Possiblecause
BlueVueDeviceManagerandthemodemareusingdifferentserialportsettings.
Troubleshooting
InstallingBlueVueDeviceManager1.7.1orlaterwillallowcommunicationwithamodemregardlessofitsserialsettings.
12.1.6 TheBlueVuemessageboxdisplays[Modem]isnotrespondingtoexpectedcommands.ContactBlueTreeSupport.
Possiblecause
BlueVueDeviceManagerhasdetectedapotentialhardwareissue.
Troubleshooting
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
55
1.8 March 30, 2010
12.2 ActivationTroubleshootingWhen themodem is connected to the cellularnetwork, itsWAN LEDwill stayon andwill flash to indicate activity,BlueVueDeviceManagersModemDiagnosticscreenwilldisplayaWAN IP. Ifthemodem isnotconnected,theWANlightwillbeoff,andthedisplayedWANIPwillbeN/A.Thisappendixcoversissueswithconnectingtothenetwork.Ifyourmodemisconnectedtothenetworkbutyoucannotbrowsetheinternet,referto12.3Troubleshooting.Eachofthefollowingconditionsmustbemetbeforeamodemcanconnecttothecellularnetwork:
1) The modem must be within coverage, and have an acceptable RF signal strength
2) The modem must be activated for use on the cellular network (CDMA) or have a valid SIM card (EDGE and HSPA)
3) The modem must be configured to connect to the cellular network
4) If the cellular carrier requires a user name and password, the modems connection parameters (WAN Settings) must be configured
12.2.1 VerifyingthesignalstrengthThemodemsSIGNALLEDshouldalwaysbeflashingorsolidONwhenithasastrongenoughsignaltodetectacellularnetwork.Additionally, the signal strength isdisplayed in the informationbox in the top rightof theBlueVueDeviceManagerwindow.Theminimumrequiredforcommunicationis1signalstrengthbar;however,asignalthisweakisnotlikelytoprovideastableconnection.IftheSIGNALLEDstaysOFF,orifthesignalstrengthislowerthan98dBm(suchas105dBm),theremaybeanissuewiththeantennaorthemodemmaybeinalowcoveragearea.
Figure 18 Modem with good signal strength
12.2.2 Confirmingthesuccessofactivation(CDMAonly)Onceamodemhasbeenactivated,BlueVueDeviceManagerwilldisplayitsphonenumberintheWAN(ModemWANSettings)screen(someGSMcarrierschoosestohavethemodemphonenumberhidden.Inthiscase,thephone#mayappearasblank).For CDMA modems, if the phone number is blank, or does not correspond to the accounts phone number, thenactivation has not been performed. Follow the instructionswritten in theQuick StartGuide that shippedwith themodemtoperformactivation.ThelatestQuickStartGuideisalsoavailablefordownloadatwww.sixnet.com
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
56
1.8 March 30, 2010
Figure 19 Phone number being displayed on the Modem Diagnostic screen after
activation
12.2.3 ConfiguringtheConnectionInitiationThemodemmustbeconfiguredtoconnecttothenetwork.Todo this,openBlueVueDeviceManagerandnavigate toWAN (WANSettings),and thenensure that the followingsettingsareapplied:
1) The Dial String is #777 for CDMA networks and *99***1# or *99# for GSM networks
2) The Connection Initiation is Always On (default setting for firmware 3.60 and later)
Click Submit to apply any changes. Themodem shouldnow connect to the cellularnetwork.Refer to this sectionsintroductionforinstructionsonhowtoverifywhetheryourmodemisconnectedtothenetworkornot.
12.2.4 ConfiguringtheUserProfileIfthemodemsSignalLEDturnsonforafewsecondsthenturnsoff,this indicatesthatauthenticationonthecellularnetworkisfailing.ThemodemsUserProfilewillneedtobeconfigured.NavigatetoWAN(WANSettings).Entertheusernameandpasswordasprovidedbythecellularserviceprovider.
12.2.5 ConclusionAsmentionedpreviously,when themodem isconnected to thecellularnetwork,BlueVueDeviceManagersModemDiagnosticscreenwilldisplayavalidWANIPandtheWANLEDwillremainonandflashingtoindicateactivityofthecellularinterface.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
57
1.8 March 30, 2010
Figure 20 WAN IP being displayed after the modem successfully connects to the
cellular network
Ifaftergoingthroughalloftheabovetroubleshootingsteps,themodemstilldoesnotacquireaWANIP,thenitisverylikelythattheaccountisnotenabledbythecellularcarrier.Contactthecellularserviceproviderandaskthem:
- CDMA:toconfirmthatthephonenumberassignedmatchesthemodemsESN(electronicserialnumber)asshowninDIAG(ModemDiagnostic),andthattheaccountisreadytobeused.
- GSM (EDGE/HSPA): to confirm that the SIM card holds a valid account (the SIM card number will berequired).
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
58
1.8 March 30, 2010
12.3 TroubleshootingThisappendixassumesthatthemodemiscurrentlyonline,andthereforetheproblemcannotbeattributedtoalackofconnectivity.BlueVueDeviceManagersModemDiagnosticscreenshouldbedisplayingavalidWANIP,i.e.anIPotherthanN/A.Ifthisisnotthecase,referto12.2ActivationTroubleshooting.
12.3.1 YoucannotbrowsetheInternet
Possiblecause#1(Ethernetonly)
ThecomputerslocalIPconfigurationisincorrect.
Troubleshooting
Thecomputermustbeinthesamesubnetasthemodemandmusthavethemodemsetasitsgateway.TheeasiestwaytoachievethisistoenableautomaticIPconfiguration(DHCP)onthecomputer.
1) In Windows XP, go to Control Panel > Network Connections (for Windows Vista, go to Control Panel > Network and Sharing Center) and select the local area connection that corresponds to the Ethernet port in the LAN or High-Speed Internet list (its usually Local Area Connection).
2) Right-click the connection and click Properties. Select Internet Protocol (TCP/IP) in the list and click Properties.
3) Write down the existing values in order to restore them if needed, then select Obtain an IP address automatically and Obtain DNS server address automatically. Click OK to close both dialog boxes, and reset the computer. It should now be ready to use the modem to access the Internet.
Possiblecause#2(Serialonly)
YoureconnectedtothemodemusingaserialcableanddidnotstartaDialUpNetworkingsession.
Troubleshooting
UnlikeEthernet/USB,youmustconfigureWindowstouseaserialcabletoaccessthenetwork.EventhoughthemodemisconnectedtotheInternet,yourcomputerisnotconfiguredtobrowsetheInternetthroughthemodem.Youwillneedtoinstallastandard33600bpsmodemdriverandcreateaDialUpNetworkingsessioninordertobeabletobrowsetheinternet.RefertotheDialUpNetworkinginWindowsappendixforawalkthroughforcreatingaDialUpNetworkingconnectioninWindowsXP.
Possiblecause#3
Yourwebbrowserisconfiguredtouseaproxywhichcannotbeaccessedbythemodem.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
59
1.8 March 30, 2010
Troubleshooting
1) Open a command prompt window by clicking Start > Run then entering cmd in the Run window.
2) At the command prompt, type ping google.com and press Enter.
IfyougetaReplyfromxxx.xxx.xxx.xxx:bytes=32time=xxxmsTTL=xxxresponse,thenyourwebbrowserisconfiguredtouse awebproxywhich ispreventing you frombrowsing the Internet through themodem.Consult yournetworkadministratorforhelponfixingthisissue.
Possiblecause#4
Thecellularaccountdoesnotallowwebaccess.
Troubleshooting
Certain cellular accounts, particularly those where security is a high concern, do not allow web access. If you areattempting to test the connectionbybrowsing the Internet, youmaynotbe able todo sobecauseof this accountrestriction.
12.3.2 (TCP/IP)Youcannotcommunicatewithacomputer/devicebehindthemodemThissectionismeantforTCP/IPconnectivity.Ifthedeviceisaserialonlydevice,skiptothenextissue.
Possiblecause#1
Yourcellularcarrierisoperatingafirewallwhichisblockingyourattemptstoconnect.
Troubleshooting
Certaincarriershaveafirewallturnedonbydefaultthatblocksallincomingconnections.
3) Open a command prompt window by clicking Start > Run then typing command in the Run window
4) Type telnet xxx.xxx.xxx.xxx 6070 where x is the modems WAN IP as assigned by the carrier
IfyoudonotconnectandseeaWelcometoBlueTreeWirelessmessage,thenyourcarrierislikelyblockingincomingconnections.Contactyourcellularserviceproviderandaskthem toopentheTCPandUDPportsyouwillbeusing toaccessthedevice.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
60
1.8 March 30, 2010
Possiblecause#2
Yourcomputer(fromwhichyouareinitiatingtheconnection)ornetworkhasafirewallblockingoutgoingconnections.
Troubleshooting
ConfirmwithyourITtechnicianthatnofirewallisblockingoutgoingconnections.
Possiblecause#3
Youdidnotperformtheappropriateportforwardingrulesonthemodem.
Troubleshooting
Themodemmustbe configured to forward incoming traffic to thedevice,otherwise your connection attemptswillneverreachthedevice.RefertoIPNetworkingFeaturesforfurtherdetails.
12.3.3 (SERIAL)YoucannotcommunicatewithadevicebehindthemodemFirst,make sure themodem is configured to enableoutside communicationwith the attacheddevice.Refer to theSerial IP sectionof themain guide fordetails. The troubleshooting stepsbelow assume themodem is configuredproperly.
Possiblecause#1
Themodemandthedeviceareusingdifferentserialportsettings.
Troubleshooting
UsingBlueVueDeviceManager,navigate toCONF (ModemConfiguration)> SerialPort,and change the serialportsettingstothesamevaluesasthoseoftheserialdevice.IftheCTSandRTSpinsarepartially(orboth)disabled,setthemodemtousenoflowcontrol(none).
Possiblecause#2
Thecablewiringisincorrect.
Troubleshooting
RefertoSection11.6fordetailsontherequiredcabletype.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
61
1.8 March 30, 2010
Possiblecause#3
TheDTRsignalisinconsistent.
Troubleshooting
A flickeringDTR signalwill interrupt communicationwith themodem. Themodem can be configured to ignore thechanges in theDTR state. InBlueVueDeviceManager,navigate toCONF (ModemConfiguration)> SerialPort, andchecktheoptiontoIgnoreDTR.
-
Industrial Wireless Modems
User's Guide
Copyright 2010 Sixnet LLC. All rights reserved.
62
1.8 March 30, 2010
12.4 FirmwareUpgradesBlueTreeperiodicallyreleasesupdatestotheBlueXfirmwareusedontheBT5x00v2andBT6000seriesmodems.Theseupdates improve the modem's stability and functionality by addressing issues and introducing new features. It isrecommendedtoalwaysupgradetothelatestversionofthefirmware.FirmwareupgradescanonlybeperformedifBlueVueDeviceManagerisaccessingthemodemthroughanIPconnectionsuchasa localEthernet,USB connectionora remote connectionover the Internet. It isnotpossible toupdate thefirmwareusingaserialcable.Upuntilfirmware3.6.1,themodemsWANIPaddres