single idler belt scale weigh pack electrical model mbsx
TRANSCRIPT
Features • Simple installation• Accurate (±1%) and reliable design• Stainless steel double ended shear beam load cell• Optional jockey wheel speed sensor running on return
belt• Junction box with spring loaded push in terminals• Zinc plated surface finish with all mounting hardware
ApplicationBelt Weighers are used for the continuous acquisition of flow rates and totalised amounts. Fitted in either new or existing belt conveyors, they can be employed for a variety of tasks:
• Measurement of production rates in plants• Accountability of received and shipped amounts• Maximum or minimum load limit alarms• Batching, in loading stations• Pre-feeder control
The study design ensures a high degree of reliability and availability.
ConstructionThe standard belt weigher comprises:
• Fully floating weighing platforms• Two double ended shear beam stainless steel load cell(s)
of IP56 construction• IP65 cable junction box of ABS plastic• IP65 Tail drum speed sensor• Mounting and adjusting bolts
Options include:• Weigh quality idler sets with screw adjustment (for precise
idler alignment, ± 0.2mm)• IP65 Cable junction box in 316 stainless steel• Friction jockey wheel running on return belt
Operating PrincipleThe belt weigher comprises load cells that measure the load on the weigh length while a speed transducer acquires the belt speed. The controller calculates both the instantaneous load and the totalised amount. The MBSX features two stainless steel double ended shear beams mounted on each conveyor stringer. The modular design also results in a lighter construction better suited to the working range of the load cells.
weighpackelectrical.com.au
SINGLE IDLER BELT SCALE MODEL MBSX
Application Belt Weighers are used for the continuous acquisition of flow rates and totalised amounts. Fitted in either new or existing belt conveyors, they can be employed for a variety of tasks: • Measurement of production rates
in plants• Accountability of received and
shipped amounts • Maximum or minimum load limit
alarms• Batching, in loading stations• Pre-feeder control The study design ensures a high degree of reliability and availability.
Construction The standard belt weigher comprises: • Fully floating weighing platforms • Two double ended shear beam
stainless steel load cell(s) of IP56 construction
• IP65 cable junction box of ABS plastic
• IP65 Tail drum speed sensor• Mounting and adjusting bolts
Options include: • Weigh quality idler sets with
screw adjustment (for precise idler alignment, ± 0.2mm)
• IP65 Cable junction box in 316 stainless steel
• Friction jockey wheel running on return belt
Operating Principle The belt weigher comprises load cells that measure the load on the weigh length while a speed transducer acquires the belt speed. The controller calculates both the instantaneous load and the totalised amount. The MBSX features two stainless steel double ended shear beams mounted on each conveyor stringer. The modular design also results in a lighter construction better suited to the working range of the load cells.
P EW e i g h P a c k E l e c t r i c a l
Wwww.weighpackelectrical.com.au
SINGLE IDLER BELT SCALE MODEL MBSX• Simple installation • Accurate (±1%) and reliable
design • Stainless steel double ended
shear beam load cell • Optional jockey wheel speed
sensor running on return belt • Junction box with spring
loaded push in terminals • Zinc plated surface finish with
all mounting hardware
weighpackelectrical.com.au
Email: [email protected] [email protected]
Phone: 0488 199 318 I 0403 337 368 I 0419 641 833
www.weighpackelectrical.com.auE [email protected] [email protected]
P 0488 199 318 • 0403 337 368 • 0419 641 833
P EW e i g h P a c k E l e c t r i c a l
WTC Process EquipmentPh +61(0) 2 8021 1672 Fx +61(0) 2 9906 5661 Em [email protected] www.tcprocess.com.au
Standard Dimensions
= =
±2° MAXIMUM
PACK IDLERS IN WEIGH ZONE 5MM
OPTIONAL JWS SPEED SENSOR
RETURN BELT DIRECTION
BELT DIRECTIONCONVEYOR IDLER
2 OR 3 LEAD-IN IDLERS
WEIGHED IDLER
2 OR 3 LEAD-OUT IDLERS
CONVEYOR IDLER
MIN. 600MM TO MAX. 1450MM
MIN. 300 TO MAX. 1200 BELT WIDTH
160
MTG
.
M12 MOUNTING BOLTS
4545
MIN. 10
MIN. 58 - MAX. 60
RETURN BELT DIRECTION
POSITION JUNCTION BOXAS REQUIRED (4 POSITIONS)
BELT WIDTH + 100 (JWS MOUNTING Ø10)
Application
Belt widths 300 to 1200mm Accuracy ± 1% (subject to installation) Idler troughing angle 20 to 35° Belt Speed 0.1 to 3 meters per second Idler Base Angle Size 50x50 to 90x90mm angle
Models and Configuration
Model Description Part Number
Belt Scale MBSX.100 Belt Scale, 100kg capacity with junction box NU0016008A MBSX.200 Belt Scale, 200kg capacity with junction box NU0016008B MBSX.400 Belt Scale, 400kg capacity with junction box NU0016008C
Controller (see separate
datasheet)
GWS-MS GWS Controller in IP65 Mild Steel control box 24VDC PS0007901 GWS-SS GWS controller in IP65 Stainless Steel control box 24VDC PS0007902
4AN 4-20mA output for GWS controller PS00048A1 PS24 110-240VAC to 24VDC cabinet power supply PS00177A1
Speed Sensor TDS Tail drum mounted speed sensor PS0003802 JWS Jockey Wheel speed sensor PS0001401
All belt scales should be installed in accordance with our recommendations for the planning in of belt scales (TCM0002) and the installation and operating manual. Due to our policy of continuous improvement, dimensions and specifications may change without notice. Have all applications and specification reviewed prior to final design and all dimensions certified for installation purposes.
Application
All belt scales should be installed in accordance with our recommendations for the planning in of belt scales (TCM0002) and the installation and
Belt widths 300 to 1200mmAccuracy ±1% (subject to installation)Idler troughing angle 20 to 35ºBelt Speed 0.1 to 3 metres per secondIdler Base Angle Size 50 x 50 to 90 x 90mm angle
ModelMBSX.100MBSX.200MBSX.400GWS-MSGWS-SS
4ANPS24TDSJWS
Belt Scale
Controller (see separate
datasheet)
Speed Sensor
Part NumberNU0016008ANU0016008BNU0016008CPS0007901PS0007902PS00048A1PS00177A1PS0003802PS0001401
DescriptionBelt Scale, 100kg capacity with junction boxBelt Scale, 200kg capacity with junction boxBelt Scale, 400kg capacity with junction boxGWS controller in IP65 Mild Steel control box 24VDCGWS controller in IP65 stainless steel control box 24VDC4-20mA output for GWS controller110-240VAC to 24VDC cabinet power supplyTail drum mounted speed sensorJockey wheel speed sensor
Specifications
Applications
Models & Configuration