Silicone Vacuum Grease Explained

What is Grease?

Grease is a lubricant in a semi-solid state. It is generally applied to those machinery partswhere liquid lubricants would not stay and need to be applied only occasionally.

Water Resistant Sealant for Joints

It also works as a sealant to keep out moisture and other unwanted materials from the system.

How is grease made?

Grease is made with a base oil or lubricant mixed with a thickener. The quality and propertiesof grease are therefore primarily determined by the following factors-

a. The base oil

b. The thickener

c. Special purpose additives, if any

How is the base oil in grease important?

We all know that lubricants can oxidize. But do you know that greases can oxidize too? That isbecause of the base oil that makes up the grease.

Good base oil = Good grease

Low Quality base oil = Low Quality grease

Oxidized base oil = Oxidized grease

Hydrocarbon base oil in grease, when oxidized, will produce carbonization leading toprogressive hardening and crust formation. This can lead to substantial damage to the movingmachine parts as well as permanently ruin the o-rings and seals.

What is the Drop Point in grease?

Generally, grease breaks down when subjected to temperatures that exceed its melting pointor the Drop Point. This is that critical temperature where the gel structure of the grease breaksdown and turns into liquid form. The base oil, thickener and the additives separate. Thistransformation is always irreversible. On cooling, it regains neither its consistency fully nor itsformer performance.

Broken Down Grease

When heated beyond its Drop point, grease softens, leaks and bleeds into the system. Forvacuum systems this spells disaster.

So does it mean that the Drop Point of a grease is determined by its base oil’s boiling point?

Yes, primarily. It also depends to an extent on the proportion and quality of the thickener used.How a particular grease will behave under extreme conditions like high pressure andtemperature depends upon the properties of the base lubricant in it.

Does the grease have a low temperature too?

Yes, just like the melting or Drop point, grease has a low temperature too at which it stiffens.At this cold or low temperature grease becomes too hard to be of any use for the movingcomponents. Instead of lubricating them, hardened grease can damage the o-rings and seals orthe moving parts like bearings etc. by stiffening and jamming them.

Again, the base oil determines the lowest temperature of grease.

Are all greases alike?

No, the difference in the components makes greases differ from one another. There arehydrocarbon greases as well as silicone greases.

Synthetic Multi-Purpose Grease

Then there are synthetic multi-purpose greases. Within these 3 categories too, greases differbased on the type and grade of the base oil used. Different industries require grease thatcaters to their specific needs. For example, Dielectric grease is used by the electrical industry;special automotive greases are used by the automotive industry;

Food grade grease is required in machines where it is likely to come in contact with edibleingredients and so on.

How does silicone grease differ from hydrocarbon grease?

As the name suggests, the basic difference lies in the type of base oil in both. Hydrocarbonbased greases are mineral oil based while silicone grease has silicone oil as the base oil.Hydrocarbon based grease is used primarily by the automotive industry and mechanismsrequiring high frictional lubrication which makes use of grease’s thixotropic property. Siliconegrease on the other hand is most suited for lubrication as well as a sealant because of its waterresistant property. Unlike hydrocarbon based grease, silicone grease does not damage rubber

seals and O-rings. Also the latter are very thermally stable; so they can withstand extremeworking temperatures.

What is special about Supervac Silicone Vacuum Grease – SV-G9?

The following merits of High Vacuum Silicone Grease SV-G9 qualify it as top quality highvacuum grease:

1) SV-G9 is made especially for the vacuum coating industry keeping in mind theparameters of the vacuum systems.

2) Its base oil is good quality silicone vacuum oil with a temperature range of -25° C to250° C.

3) It’s also called high vacuum grease because it has been designed for systems requiring

vacuum up to 10-9 Torr

4) SV-G9 lubricates and preserves the O-rings and seals and doesn’t let them swell orsoften up with heat.

5) It contains no additives. Because of this, no unwanted vapors are released into thevacuum chamber that can adhere to the substrate as impurities.

6) It is stiffer than normal silicone greases; hence, even in very high temperatures, itremains non-runny and maintains its consistency.

7) It’s an excellent water-proof sealant for the joints which keeps out the moisture fromthe system; so, is a must-have for all the vacuum systems.

8) It has very good tackiness so it adheres to the surface sealing the vacuum.

Good Tackiness of SV-G9

9) It has extremely low vapor pressure and hence it is extremely suitable for vacuumapplications.

10) It is resistant to attack of most acids, alklies and water.

Formulated from high quality silicone vacuum oil as the base oil, SV-G9 is ideal for the vacuumcoating industry. What’s more, SV-G9 is very competitively priced. It comes in the packing of100g and 1 kg.

Supervac High Vacuum Silicone Grease SV-G9

SV-G9 is exact equivalent of Dow vacuum grease and exhibits all the qualities of the latterminus the high cost. Vacuum coaters, world over, are using this product with utmostsatisfaction.