sia wood abrasive catalog
DESCRIPTION
For wood applicationsTRANSCRIPT
Finishing systems for wood, wood-based materials and varnishes
2
Contents
3
Products
Finishing methods + t ips
Materials
Product range by type
Hand sanding 40 – 41Portable sanders 42 – 43Profile sanding 44 – 45Belt sanding 46 – 47
Product datasheets by range 48 – 79
Accessories 80 – 82
Abrasives
Types of abrasives 26 – 27Grit minerals 28
Tips
Hand sanding/portable sanders 29 – 30Profile sanding 31Belt sanding 32 – 35Optimum grit sequence 36Safety 37Storage 37
sia’s commitment 4 – 5
Solid wood
Product selection 6 – 9
Wood-based materials
Product selection 10 – 13
Varnishes
Product selection 14 – 19Application recommendations 21 – 23
Contents
Top-quality products from SwitzerlandOur careful choice of premium materials, the latest production and manufacturing equipment and sophisticated production technologies enable us to provide sanding products of the highest level. Abrasive materials from sia undergo continuous de velopment based on demanding customer requirements and our detailed analysis of production materials. They thus represent the finest examples of Swiss precision and quality with one goal: a commitment to the perfect surface.
Continuous developmentExternal audits combined with more than 25 inhouse inspections and risk analyses each year covering all areas of our operations allow us to be competitive and to maintain a sustained development programme to ensure the commercial success of sia Abrasives.
By being certified to ISO 14001, ISO 9001 and OHSAS 18001, sia Abrasives is committed to an active programme of environmental protection, to compliance with quality requirements, and to ensuring health and safety at work.
Priority projects
Regulations for chemicalsREACH (Registration, Evaluation and Authorisation of Chemicals) concerns a European Community regulation dealing with chemicals and has been in force since June 2007. Its purpose is to gather all necessary information regarding the properties of chemical substances and to examine their use and the associated risks to humans and the environment. We ensure compliance with REACH by keeping uptodate records of all chemical materials and substances and by taking all necessary steps to meet our REACH obligations.
Health and safety team Our newly formed Health and Safety Team, which includes among others members of the sia staff, ensures the progress of ongoing projects, tests new ideas, and puts new health and safety schemes into action.
5
A safe, healthy workplace
We set the standard for an accident and hazardfree workplace. The wellbeing of people is an integral part of our culture and is based on OHSAS 18001 (Occupational Health and Safety Management Systems).
We are cleanWe develop products that also effectively help our customers remain healthy. We have had our finishing products tested for dust formation by the Swiss Accident Insurance Fund (SUVA). The results are impressive: the lowest dust emissions compared with our competitors’ products.
We set an examplesia Abrasives is one of the first companies in the world to comply with the new OHSAS 18001:2007 standard. We also comply strictly with the recommendations of the FEPA safety standards and publish this, together with other safety information, at www.siaabrasives.com.
Choosing raw materials, setting quality standards
The comprehensive inspection programme in place in our manufacturing operations enables us to produce premiumquality products. The superior properties of sia products represent excellent value for our customers.
We verifyWe select our raw materials and their suppliers in accordance with strict criteria on quality, en vironmental impact and safety. Longstanding partnerships and continuous testing of raw materials ensure goodquality, reliable and faultfree materials.
We continually optimiseOur internal process management system (PMS) records and improves important procedures and allows direct intervention in the production process where necessary. In this we can operate an active, committed opportunitymanagement programme.
Environmental-friendly production, competent and ethical waste disposal
For many years we have concerned ourselves with the efficient use of energy and committed ourselves to protecting the environment. We have implemented many measures within our production processes to protect the air, land and water. We use our energy and rawmaterial resources efficiently and carefully.
We careBy joining the EnAW (Energy Agency for Industry) programme, we have voluntarily made a commitment to improve energy efficiency and limit our CO2 emissions as part of our daytoday operations.
We take responsibilityAs a «dry factory», we protect nature by not putting untreated industrial wastewater back into the water system (i.e. public drains). Weekly testing of additional industrial wastewater for compliance with regulations demonstrates that our wastewater is clean.
sia’s commitment
sia’s commitment
Environment Quality People
American cherry
LimbaMapleWalnutOak
Eastern white pine
Swiss pineDouglas firPineLarchJelutongSpruce
FirHemlockYew
Beech
The world of plants, which includes trees and shrubs, is one of huge variety. There are between 30,000 and 40,000 different kinds throughout the world, of which around 500 types of wood are processed to make furniture and woodbased materials.
For the sake of simplicity, we have divided the different varieties of trees into hardwood, softwood and wood containing resins and oils.
Each type of wood being processed is made up of different content depending on where it was grown, and these affect both the wood’s physical and mechanical properties when being machined. These factors are critical for the finishing process: woods that contain high levels of resins (spruce, pine) or oils (teak) are sanded using a product with an open grit coating in order to obtain a perfect surface.In the case of wood that contains some mineral content, a product with a silicon carbide grit should be selected.
Solid Wood – Product selection
7
Materials
BirchRaminSipoWengeAmerican cherry
EucalyptusTeakIrokoAsian oakDurian
RedwoodFir
Wood containing resins or oils Both hardwoods and softwoods can contain resins or oils in their cellular structure. These protect the tree from extreme weather conditions and help it to heal after physical damage.
The oils and resins, however, adversely affect the wood’s sanding properties.
Softwood Wood that is lighter than hardwood is categorised as softwood. It grows more quickly than hardwood and has a looser, open vascular structure.
This wood is therefore softer and more sensitive to pressure but is easier to finish.
Hardwood
Because of its fibrous nature and close vascular structure, hardwood is a strong, heavy wood.
Its slow rate of growth makes the wood dense and hard and thus difficult to finish.
8
66
2921
sia
woo
d
65
2920
sia
woo
d
64
2918
sia
pan
z
63
2812
sia
ral x
60/61
1960
sia
rexx
cut
59
1939
sia
woo
d
58
1920
sia
woo
d
57
1919
sia
woo
d
Wood containing resins
Wood containing oils
Softwood
Hardwood
48
1400
sia
nor a
o
54see page17
49 s
iara
l f
Solid Wood – Product selection
9
67
2933
sia
tur
Portable sandersHand sanding
Belt sandingProfile sanding
Materials
77
Flat
pad
76
Stan
dard
pad
75
Stan
dard
blo
ck
80
siab
ross
e
Circ
ular
bru
sh
80
siab
ross
e
Plat
e br
ush
71
Non
wov
en
78/79
profi
le s
iast
ar
71
6120
sia
vlie
s
7029
51 s
iaso
ft70
2951
sia
tur h
69
2943
sia
tur h
68
2936
sia
tur j
j
Wood-based materials are made up of layers of wood of different strengths or strips,chips or fibres of various types of wood. Pressed-wood materials are created by bonding a mixture of different forms of wood particles with natural and/or synthetic adhesives.
Wood-based materials – Product selection
11
MDF consists largely of wood fibresMDF (medium-density fibreboard) is a sheet material made from wood fibres. MDF’s technical properties make it one of the world’s fastest-growing wood products. Based on finely crushed fibres of conifer wood, usually without bark, and produced by a gentle com-pression process, the result is a wood product which is consistently homogeneous in both its length and width. MDF board is very easy to work with and is highly versatile in its applications. It is often used as base panels for flooring and in the furniture industry, where the ability to finish its edges is a highly desirable property.
Chipboard consists largely of wood chipsChipboard is a subgroup of wood particle board. It is a flat, com-pressed sheet with a surface made of especially fine-grade chips. It is made by gravity- or air-spreading processes, and during its manufac-ture there is a gradual transition from the coarse-grained inner layer to the fine-grained outer layer. Chipboard is in most cases veneered or covered with an outer coating. Because the edge faces of chipboard are very rough, these are rarely finished and are usually covered, for instance with an edging of solid wood.
Plywood consists largely of veneersThe term plywood refers to sheets of wood made up of a number of layers of veneer glued one on top of the other. Each layer is rotated through 90° before being glued down to the layer beneath. The grain on the two visible sides runs parallel so there is usually an uneven number of layers. Plywood can be obtained in various kinds of wood and should be finished with an abrasive appropriate to the relevant wood; only the outermost layer is sanded, and this contains no adhe-sive. Plywood is used mostly for making furniture, models and also for interior finishing.
Materials
12
60/61
1960
sia
rexx
cut
63
2812
sia
ral x
62
2747
sia
tur
59
1939
sia
woo
d
58
1920
sia
woo
d
57
1919
sia
woo
d
54
1749
sia
ral f
MDF
Chipboard
Plywood
50see page17
07 s
iapa
r
Wood-based materials – Product selection
13
Portable sandersHand sanding
Belt sandingProfile sanding
64
2918
sia
pan
z
Materials
65
2920
sia
woo
d
78/79
profi
le s
iast
ar
71
siav
lies
rolle
rs
70
2951
sia
tur h
69
2943
sia
tur h
68
2936
sia
tur j
j
67
2933
sia
tur
A varnish is a coating material in liquid or powder form which is applied to surfaces in thin layers. A continuous film is obtained by applying chemical or physical processes (e.g. solvent evaporation).
Varnishes – Product selection
15
The main types of varnish in current use are:
PUR (polyurethane) varnishes• Contains solvent• Approx. solids content 30 – 40 %• Drying is a physical process, curing is a chemical process• The better the varnish has set, the lower the tendency to clog
UP (polyester) varnishes• Normally a 2-component system hardening started with a crosslinking additive• Approx. solids content 90 %• Thick varnish layers possible• Minimal varnish shrinkage• Very hard, robust varnish• Intermediate sanding best with coarse sizes (P150 – P240), giving improved adhesion
UV-hardened varnishes• Solvent-free• Approx. solids content 99 %• UV curing leads to a short processing time• Thin varnish layer (furniture industry)• Work pieces usually flat, varnish frequently applied by roller on production line
Oil/wax• Natural wood protection, e.g. linseed oil (impregnation)• Oil is absorbed by the wood, filling up the cell cavities• Does not form a film
NC (nitrocellulose) varnishes• Contains solvent• Approx. solids content 20 %• Drying is a physical process• Thin layers• Thermoplastic• Scratches from sanding in wood and varnish quickly visible
Water-based varnishes• Water used as thinner• Approx. solids content 30 – 40 %• Drying is a physical process, curing partially a chemical process• Drying time somewhat lengthy and more difficult to control• Wood fibres raised by water absorption• Usually thermoplastic• Sanding material tend to clog easily
Varnishes – Product selection
Materials
16
UP varnishes
Water-based varnishes
57
1919
sia
woo
d
56
1913
sia
wat
fc
55
1796
sia
lac
54
1749
sia
ral f
53
1748
sia
soft+
53
1748
sia
soft
53
1748
sia
rexx
fine
52
1729
sia
lac
UV-hardened varnishes
49
1701
sia
lac
ao
51see page17
27 s
iaw
at fc
Varnishes – Product selection
17
71
Non
wov
en
77
Flat
pad
76
Stan
dard
pad
75
Stan
dard
blo
ck
72
siac
arat
vel
vet
73
siaa
ir ve
lvet
71
6120
sia
woo
l
71
6120
sia
vlie
s
7029
51 s
iatu
r h68
2936
sia
tur j
j
62
2747
sia
tur
60/61
1960
sia
rexx
cut
58
1920
sia
woo
d
Materials
Portable sandersHand sanding
Belt sandingProfile sanding
18
575655545353535249 51
NC varnishes
PUR varnishes
1919
sia
woo
d
1913
sia
wat
fc
1796
sia
lac
1749
sia
ral f
1748
sia
soft+
1748
sia
soft
1748
sia
rexx
fine
1729
sia
lac
1701
sia
lac
ao
see page17
27 s
iaw
at fc
Oil/wax
Varnishes – Product selection
19
71 77767572 73717170686260/6158
Non
wov
en
Flat
pad
Stan
dard
pad
Stan
dard
blo
ck
siac
arat
vel
vet
siaa
ir ve
lvet
6120
sia
woo
l
6120
sia
vlie
s
2951
sia
tur h
2936
sia
tur j
j
2747
sia
tur
1960
sia
rexx
cut
1920
sia
woo
d
Materials
Portable sandersHand sanding
Belt sandingProfile sanding
20
21
Materials
Sanding belts for perfect surfaces
Controlled scatter
Optimum belt joints
Dust-free process
For product data see page 52
Advantages• Perfect surfaces thanks to TopTec• Superior surface quality when sanding on industrial varnish systems• Low dust adhesion on the abrasive belt, work piece and machine
thanks to the anti-static treatment• Application-specific optimised belt joints• Additional stearate coating prevents belt clogging • Long life
Intermediate sanding of PUR varnish systems P220 – P400
Intermediate sanding of UV water-based varnishes P220 – P500
Preparation for polishing on high-gloss surfaces P400 – P800
Intermediate sanding of PUR varnish systems P220 – P400
Intermediate sanding of UV varnish systems P220 – P500
Preparation for polishing on high-gloss varnishes P400 – P800
Wide belt sanding
Cross belt sanding
Intermediate varnish sanding with 1729 sialac
22
Application recommendations
Matt-finish varnishes Sanding stagesP120, P180 – P220then apply varnish
Glossy and high-gloss varnishes Sanding stagesP120, P180 – P240then apply varnish• Up to P240 for high-grade
and difficult woods
When using water-based varnishes, always sand with one grit size finer
Matt-finish varnishes Sanding stagesP100, P150 – P220then apply varnish
Glossy and high-gloss varnishes Sanding stagesP120, P180 – P240then apply varnish
When using water-based varnishes, always sand with one grit size finer
Belt sanding
Hand sanding/portable sanders
Tips
The following points must be followed in particular for a perfect surface:
• Always follow the recommendations of the varnish manufacturer.
• Always use an aggressive abrasive. A blunt grit presses the wood fibres together instead of sanding them off.
• Apply low pressure and choose the correct abrasion speed (see the chapter on belt sanding, page 35).
• The higher the gloss from the varnish, the more readily scratches show up in the wood and varnish. Thus finish with fine-grade sanding.
• Always cross-sand assembled work pieces (mitres).
• On difficult veneers, sand with a grit size 1– 2 grades finer than usual.
• The final sanding pass prior to varnishing must always be made in the direction of the grain to avoid crosswise scratches becoming visible after varnishing.
Wood preparation for varnishing
23
Materials
When using water-based varnishes, always sand with one grit size finer.
Matt varnishes
Matt varnishes
P220 – P320One-step intermediate sanding of varnish
P220 – P320One-step intermediate sanding of varnish
Glossy and high-gloss varnishes
Glossy and high-gloss varnishes
P280 – P400Intermediate sanding of varnish in 1– 2 stages depending on starting surface condition
P280 – P400Intermediate sanding of varnish in 1– 2 stages depending on starting surface condition
When using water-based varnishes, always sand with one grit size finer.
Tips
Belt sanding
During intermediate sanding of varnish on wide-belt machines, please note the following:
• Always follow the recommendations of the varnish supplier.
• Sanding with a padded belt gives better results than a contact belt.
• The use of an efficient dust-extraction system reduces dust on the work piece and prevents premature clogging of the abrasive.
• Also recommend is the use of a blower system to clean the belt during sanding. This significantly prolongs belt life.
• Using only as much pressure as necessary reduces overheating of the varnish to a minimum and thus significantly improves the surface quality of the work piece and considerably prolongs abrasive life.
• Adjust the feed speed (8 –15 m/min) to suit the operation and varnish system to prevent surface overheating and reduce belt clogging.
• Optimum sanding speed for varnish sanding is between 3 and 15 m/s.
• Cross-sanding is recommended in order to achieve the most even finish possible (cross/pad sanding).
Hand sanding/Portable sanders
Intermediate sanding of varnish
25
Abrasives
Types of abrasives 26 – 27Grit minerals 28
Tips
Hand sanding/portable sanders 29 – 30Profile sanding 31Belt sanding 32 – 35Optimum grit sequence 36Safety 37Storage 37
Finishing methods + tips
26
Types of abrasives
Foam-backed sanding blocks in the widest possible variety of shapes and grades for precision finishing of wood, fillers, paint and varnish.
In a special process, polyurethane is made into large foam blocks which form the basis of the foam backing. The blocks are then further processed into sheets and strips. Afterwards, a thin layer of adhesive is applied in a spraying process. In a final processing stage, the grid is applied in multiple coating stages.
Foam-backed abrasives
Products for preparatory and cleaning work as well as structuring, usually without changing the geometry of the work piece.
In a continuous process, the fibres are carded, layered and needle-punched to form a nonwoven fabric. The resulting fine polyamide fibre forms a 3-dimensional backing. In a subsequent process it is sprayed with a blend of bonding agents and grit which penetrates into the fabric.
Nonwoven abrasives
Classic flexible abrasives and complete finishing systems for conventional surface treatment on all types of materials.
The basic construction is based on a flexible backing layer. The grit is initially fixed by using a base coat on the flexible backing. The sec-ond application of adhesive, the size coat, is made following a drying process and secures the grit more firmly to the backing. Other coat-ings may be added on top of the size coat. These consist mainly of substances to reduce early choking or clogging of the abrasive during the sanding process or of chemicals which provide a cooling effect during hard sanding on metal-based materials.
Flexible abrasives
27
Flexible Schleifmittel Feinst-Schleifmittel
Schaumstoff-SchleifmittelVlies-Schleifmittel
Flexible Schleifmittel Feinst-Schleifmittel
Schaumstoff-SchleifmittelVlies-Schleifmittel
Flexible Schleifmittel Feinst-Schleifmittel
Schaumstoff-SchleifmittelVlies-Schleifmittel
e.g. standard block
e.g. 6120 siavlies/K320
e.g. 1960 siarexx cut/P080
Grit
Adhesive
Foam backing
Grit
Adhesive
Polyamide fibres
Stearate/coolant
Size coat
Grit
Base coat
Flexible backing
Finishing methods + tips
28
Grit minerals
The most common materials used to make abrasive grit today are the synthetic minerals aluminium oxide and silicon carbide in their various forms. There is also a growing use of special minerals such as zirconia alumina, ceramic alu-minium oxide and diamond. The use of natural minerals like garnet and emery, however, is rapidly declining. The grit’s hardness and toughness, which are a function of the minerals used, determine the properties and applications of the abrasives.
Applications garnet wood, hand sandingemery non-ferrous metals, precious metals, fine sanding zirconia alumina steel alloysceramic aluminium oxide high-alloy steel brown aluminium oxide wood, metalsemi-friable aluminium oxide wood, metalwhite aluminium oxide wood, varnish, paintsilicon carbide varnish, sheet materials, stone synthetic diamond hard-finish varnish, glass, stone
2.3
Toughness (Batelle method)
7.63.32.5 2.9 3.1 3.6
10.0
7.8
8.0
8.2
8.4
8.8
8.6
9.2
9.0
9.6
9.4
9.8
3.22.4 2.8 3.0 3.4 3.52.6 2.7
10.2
Har
dnes
s (M
ohs’
sca
le)
Ceramic aluminium oxide
Zirconia alumina
Brown aluminium oxide
Semi-friable aluminium oxide
Garnet
White aluminium oxide
Emery
Silicon carbide
Synthetic diamond
29
Product datasheets:
1748 siasoft, see page 53
2951 siasoft, see page 70
Pressure distribution using conventional abrasives without siasoft, e.g. sandpaper sheets
Pressure distribution using siasoft abrasives with foam backing
The optimum pressure distribution provided by the foam backing gives optimum sanding.Pressure from each fingertip is spread more evenly over the entire surface, thereby avoiding isolated deep scratches. Clogging is reduced, there is less danger of sanding through the varnish, and the finish is finer and more uniform.
siasoft – for optimum pressure distribution
Flexible abrasivessiavlies abrasives
Your siafast solution:• economic and cost-saving because the abrasive can be used multiple times • tough and durable, stands up to dust, moisture and temperature fluctuations • cool running and less clogging thanks to special ventilation effect• Increased safety during the finishing of surfaces and contours due to the cushioning
spring effect between the hook-and-loop surfaces
siafast – the fast, time-saving fastening system
Hand sanding/portable sanders
Finishing methods + tips
30
Type Lift (mm) Lift (inches) Grit range
Hard 5,0 – 10,0 3/16 – 3/8 P040 – P240
Soft 5,0 3/16 P080 – P500
Extra soft 2,0 – 5,0 1/8 – 3/16 P220 – P600
More information about backing discs on page 82
When using a random orbital sander, take care to ensure that the most suitable backing pad is used. Soft or extra soft backing pads are recommended for intermediate sanding on varnish. For dust-free operation, we recommend the use of a powerful dust-extraction system.Because very little material is taken off when sanding on varnish, this operation should be carried out with care. When using machines, apply only a low pressure to keep sanding faults to a mini-mum.
We developed our 15-hole air-chamber backing pad on the basis of our renowned air-chamber technology used in industries throughout the world. It allows 6-, 7-, 9- and 15-hole discs to be used with one and the same backing pad, which provides major savings in the storage of diffe-rent pads. Thanks to its ingenious system, the 15-hole backing pad can be used on all current orbital sanding machines.
The 15-hole backing pad is available in hard, soft and extra-soft grades.
Advantages and properties• suitable for use on 6-, 7-, 9- and 15-hole discs• air-chamber system available in three hardness grades • high-suction centre hole gives outstanding dust removal • special adapters for compatibility with all common orbital sanders • low vibration (discs and adapters are weight-optimised)
15-hole backing pad – for every purpose
Backing pad – hard, soft, extra soft
5/16” + M8for universal use
Central holes reduce blockages
Air-chamber system for a dust-free working environment
31
More information on page 62 and starting from page 67
More information on page 69
More information on pages 78/79
high performanceflexible durable
Very high demands are placed on flexible sanding belts, which have to handle the tightest radii and achieve maximum removal rates and the best possible surfaces. The siatur family of profile belts has proved its worth for years over many millions of applications on solid wood, wood-based materials, fillers and varnish.
siatur profile sanding belts – maximum flexibility for industrial profile belt sanding
flexibleunique versatile
The 2943 siatur h profile sanding system is the only one that allows you to make your own profile sanding wheels without incurring major expenses in materials and costs. For years, furniture manufacturers all over the world have been making their own profile sanders using the unique, stretchable 2943 siatur h abrasive, giving them unlimited versatility in terms of special profiles. Once the abrasive has been used up, the wheels can be given a replacement coat at very low cost.
profile siastar – the profile sanding system that leads the way
2943 siatur h – the solution for making your own sanding wheels
efficient sophisticatedmodular
Ease of use, standardised profiles and high dimensional accuracy are only three of the arguments in favour of the new «profile siastar» profile sanding system. The sophisticated adapter system combined with separate sanding wheels enables users to machine curves, rebates, chamfers and edges easily and cleanly on all common spindle moulders, edge polishers and CNC machines.
Get full details in our «Profile Sanding
Systems» brochure
Profile sanding
Finishing methods + tips
32
Controlled grit coating
The advantages of sia’s high-tech coating system
optimum grit volume perfect grit adhesioneven grit distributiontested to FEPA standards
...giving you perfect surface quality
© by sia Abrasives Industries AG – All rights reserved
Superior belt joints
Because of their high consistent quality, sia belt joints offer these advantages:
tailored to specific applications top-quality finishingexcellent stability and long lifeno sanding faults
…giving you perfect surface quality
The antistatic treatment of the belts results in the following advantages:
dust-free work piecesclean machineryefficient dust removalcleaner air in the working environmentlonger belt life low clogging
…giving you perfect surface quality
The latest monitoring methods ensure the highest quality standards
Belt joints that can stand up to any test
Efficient dust removal
Composition of the abrasive
Type 1Overlapped joint with
no grit removal
Type 4Butted joint with special foil on grit side
Type 3Butted joint with special
foil on the back
Type 2Overlapped joint with grit removal
Clean work pieces without residual dust
Dust-free operation
Belt sanding
TopTec – the new generation of belt sanding from sia
33
Controlled grit coating
The advantages of sia’s high-tech coating system
optimum grit volume perfect grit adhesioneven grit distributiontested to FEPA standards
...giving you perfect surface quality
© by sia Abrasives Industries AG – All rights reserved
Superior belt joints
Because of their high consistent quality, sia belt joints offer these advantages:
tailored to specific applications top-quality finishingexcellent stability and long lifeno sanding faults
…giving you perfect surface quality
The antistatic treatment of the belts results in the following advantages:
dust-free work piecesclean machineryefficient dust removalcleaner air in the working environmentlonger belt life low clogging
…giving you perfect surface quality
The latest monitoring methods ensure the highest quality standards
Belt joints that can stand up to any test
Efficient dust removal
Composition of the abrasive
Type 1Overlapped joint with
no grit removal
Type 4Butted joint with special foil on grit side
Type 3Butted joint with special
foil on the back
Type 2Overlapped joint with grit removal
Clean work pieces without residual dust
Dust-free operation
With TopTec, the new generation of sanding belts, sia Abrasives reaches another milestone in the development of application-optimised sanding belts with maximum customer benefit.
Outstanding sanding results and superior surface quality come from the combination of controlled grit distribution, belt joints and backing materials designed to suit the specific application along with antistatic properties that arise from a brand-new production process.
Finishing methods + tips
34
With antistatic finishWithout antistatic finish
Static charges
Any material-removal process generates friction and static charges, resulting in a positive or negative electrostatic voltage on the work piece and belt (kV/m). If these charges cannot be conducted to an earth ground, then the belt, the work piece and dust all become statically charged.
This charging process causes dust from the sanding process to stick like a magnet to the work piece and the machine, an effect made worse by using abrasives that have a low-grade antistatic finish. The result is a greater need for cleaning and, at the same time, a reduction in belt life.
Effects and advantages of an antistatic finish
• Conductivity releases/neutralises dust
• Optimum dust removal
• Longer belt life
• Clean work piece surfaces and edges
• Clean machinery
• Improved surface quality
Antistatic effect
However, if sanding belts are used which contain carbon fibres, soot, graphite and/or dissolved salts (electrolytes) in the paper and/or adhesive, such static voltages can be grounded through contact points on the machine such as drive or guide rollers.
Paper, fabric and abrasive grit are insulators rather than conductors, so it is the abrasive’s construction which determines whether or not a belt’s antistatic properties are effective or not. For this reason, only the very best products are awarded the TopTec seal of quality.
Antistatic finish
35
Wood
Varnish
Veneer/solid wood
Plywood
Chipboard/MDF
Varnish
Amount removed in mm | inches Amount removed in mm | inches
Steel/hard rubber roller
Steel/hard rubber roller
Steel/hard rubber roller
Medium rubber roller
Medium rubber roller
Soft rubber roller
Soft rubber roller
Contact belt Padded belt Long belt Edge belt Manual belt Profile belt Profile wheel
Feed rates [m/min] | [ft/min]
Contact belt Padded belt Long belt Edge belt Manual belt Profile belt Profile wheel
Maximum material-removal rates
Cutting speed [m/s] | [ft/s]
P036
P040
P060
P080
P100
P120
P150
P180
P220
finer
Padded belt sandingContact belt sanding
Finishing methods + tips
P036
P040
P060
P080
P100
P120
P150
P180
P220
finer
Grit sizeGrit size
–
–
–
< 0,30 | 0,012
< 0,20 | 0,008
< 0,15 | 0,006
< 0,08 | 0,003
< 0,05 | 0,002
< 0,03 | 0,001
< 0,03 | 0,001
< 1,00 | 0,04
< 0,80 | 0,03
< 0,60 | 0,02
< 0,50 | 0,019
< 0,30 | 0,012
< 0,20 | 0,008
< 0,10 | 0,004
–
–
–
5 –10 m/s 8 –15 m/s 8 –15 m/s 8 –15 m/s 8 –10 m/s 16 – 33 ft/s 26 – 49 ft/s 26 – 49 ft/s 26 – 49 ft/s 26 – 33 ft/s
10 –18 m/s 10 –18 m/s 8 –10 m/s 33 – 59 ft/s 33 – 59 ft/s 26 – 33 ft/s
20 – 25 m/s 15 – 22 m/s 16 – 22 m/s 12 –18 m/s 7 –11 m/s 12 – 24 m/s 12 –15 m/s 66 – 82 ft/s 49 – 72 ft/s 52 – 72 ft/s 39 – 59 ft/s 23 – 36 ft/s 39 – 79 ft/s 39 – 49 ft/s
20 – 25 m/s 15 – 22 m/s 16 – 22 m/s 12 –18 m/s 12 – 24 m/s 12 –15 m/s 66 – 82 ft/s 49 – 72 ft/s 52 – 72 ft/s 39 – 59 ft/s 39 – 79 ft/s 39 – 49 ft/s
20 – 25 m/s 15 – 22 m/s 16 – 22 m/s 12 – 24 m/s 12 – 18 m/s 66 – 82 ft/s 49 – 72 ft/s 52 – 72 ft/s 39 –79 ft/s 39 – 59 ft/s
3 –15 m/s 3 –15 m/s 7 –15 m/s 5 –15 m/s 10 – 49 ft/s 10 – 49 ft/s 23 – 49 ft/s 16 – 49 ft/s
36
P280P240P220P180P150P120P100P080P060P040
Orbital sander Hand sanding Skip two grit sizes e.g. P150 and P240
Padded belt Orbital sander Do not skip a grit size e.g. P150 and P150
Cross belt Padded belt Do not skip a grit size e.g. P150 and P150
Contact belt Padded belt Do not skip a grit size e.g. P150 and P150
From To Comments
The main exceptions to this are given below:
For example:
Using the optimum grit sequence during the sanding process not only gives better sanding results but is also important in achieving the most economical surface treatment. For this reason it is important never to skip more than one grit size at one time!
Optimum grit sequence
37
Finishing methods + tips
Incorrect storage of abrasives can, due to fluctuations in humidity and/or temperature, result in the following negative effects:
• changes in dimensions• buckling• reduced sanding performance• belt slippage• belt flutter• breakage of belts or joints
Correct storage means:• achieving optimum sanding results• guaranteed product life• guaranteed good performance • saving money
Storage conditions• temperature: 15 – 25 ºC | 59 – 77 ºF• relative humidity 40 – 70 %• store abrasives in their original packaging• hang up belts
Never store abrasives • on heaters• near open windows• on concrete floors
Storage
For safety reasons, sia Abrasives recommends that its customers wear ear protection, protective eyewear, masks and gloves and that they use a dust-removal system. Where sia Abrasives prints pictograms on products and/or packaging, these must be complied with.
The sia abrasives listed in this catalogue (exception: 2747 siatur) do not contain any hazardous materials (EU Guideline 67/548/EWG) and may be disposed of safely in modern waste-incineration plants.
We refer specifically to the FEPA safety recommendations and the safety datasheets for abrasive products on backing material, which you can download from www.sia-abrasives.com.
Safety
39
Products
Product selection by type
Hand sanding 40 – 41Portable sanders 42 – 43Profile sanding 44 – 45Belt sanding 46 – 47
Product datasheets by product family 48 – 79
Accessories 80 – 82
40
70 x
125
mm
/no
hole
152
x 22
9 m
m /n
o ho
le
115
x 14
0 m
m /n
o ho
le
2 3 /
4 x
5”/n
o ho
le
6 x
9“/n
o ho
le
4 1 /
2 x
5 1 /
2”/n
o ho
le
Strips 23
0 x
280
mm
Foam-backed abrasives
74 – 77
716120 siavlies
702951 siasoft
702951 siatur h
682936 siatur jj
60/611960 siarexx cut
571919 siawood
561913 siawat fc
531748 siasoft+
53
51
49
1748 siarexx fine
1727 siawat fc
1701 sialac
481400 sianor ao
Dim
ensi
ons
in in
ches
Pa
ge/D
imen
sion
s in
mm
9 x
11”
Standard sheets
Hand sanding
41
RollsFoam-backed abrasives4”
x 1
1Y
4 1 /
2” x
11Y
5” x
11Y
3 3 /
4” x
55Y
4” x
55Y
4 1 /
2” x
55Y
5” x
55Y
4 1 /
2” x
27
1 /2Y
sia
soft
Stan
dard
blo
ck
2 3 /
4 x
3 1
3 /16
x 1
”
Com
bina
tion
bloc
k
2 3 /
4 x
3 1
3 /16
x 1
”
Stan
dard
pad
3 13
/16
x 4
3 /4
x 1 /
2”
Flat
pad
4 1 /
2 x
5 1 /
2 x
3 /16
”
100
mm
x 1
0 m
115
mm
x 1
0 m
125
mm
x 1
0 m
95 m
m x
50
m
100
mm
x 5
0 m
115
mm
x 5
0 m
125
mm
x 5
0 m
115
mm
x 2
5 m
sia
soft
Stan
dard
blo
ck
68 x
97
x 27
mm
Com
bina
tion
bloc
k
68 x
97
x 27
mm
Stan
dard
pad
97 x
120
x 1
2 m
m
Flat
pad
115
x 14
0 x
5 m
m
Products
42
3 3 /
16 x
6”/
no h
ole
4 1 /
2 x
4 1 /
2”/n
o ho
le
4 1 /
2 x
5 1 /
2”/n
o ho
le
4 1 /
2 x
9”/n
o ho
le
3 1 /
8 x
5 1 /
4”/1
4-ho
le
3 3 /
16 x
5 1
/4”/
8-ho
le
3 3 /
16 x
6”/
8-ho
le
3 11
/16
x 7”
/8-h
ole
4 x
4 5 /
16”/
6-ho
le
4 1 /
2 x
4 1 /
2”/6
-hol
e
4 1 /
2 x
9”/1
0-ho
le
81 x
153
mm
/no
hole
115
x 11
5 m
m /n
o ho
le
115
x 14
0 m
m /n
o ho
le
115
x 23
0 m
m /n
o ho
le
80 x
133
mm
/14-
hole
81 x
133
mm
/8-h
ole
81 x
153
mm
/8-h
ole
93 x
180
mm
/8-h
ole
100
x 11
0 m
m /6
-hol
e
115
x 11
5 m
m /6
-hol
e
115
x 22
8 m
m /1
0-ho
le
73siaair velvet
72siacarat velvet
716120 siavlies
652920 siawood
60/611960 siarexx cut
571919 siawood
541749 siaral f
531748 siasoft+
53
50
1748 siarexx fine
1707 siapar
3 1 /
8 x
6 9 /
16”/
8-ho
le
3 11
/16
x 9”
/no
hole
3 11
/16
x 9”
/8-h
ole
4 1 /
2 x
11”/
no h
ole
4 1 /
2 x
11”/
10-h
ole
Dim
ensi
ons
in in
ches
Pa
ge/D
imen
sion
s in
mm
Portable sanders
siafast stripsPlain strips
80 x
166
mm
/8-h
ole
93 x
230
mm
/no
hole
93 x
230
mm
/8-h
ole
115
x 28
0 m
m /n
o ho
le
115
x 28
0 m
m /1
0-ho
le
43
siafast discssiasoft + discssiafast delta sheets
ø 3
1 /8”
/no
hole
ø 4
1 /2”
/no
hole
ø 5”
/no
hole
ø 6”
/no
hole
ø 12
”/no
hol
e
ø 4
1 /2”
/8-h
ole
ø 5”
/8-h
ole
ø 5”
/9-h
ole
ø 6”
/6-h
ole
ø 6”
/7-h
ole
ø 6”
/9-h
ole
ø 6”
/15-
hole
ø 6”
/no
hole
/pla
in
ø 80
mm
/no
hole
ø 11
5 m
m /n
o ho
le
ø 12
5 m
m /n
o ho
le
ø 15
0 m
m /n
o ho
le
ø 30
0 m
m /n
o ho
le
ø 11
5 m
m /8
-hol
e
ø 12
5 m
m /8
-hol
e
ø 12
5 m
m /9
-hol
e
ø 15
0 m
m /6
-hol
e
ø 15
0 m
m /7
-hol
e
ø 15
0 m
m /9
-hol
e
ø 15
0 m
m /1
5-ho
le
ø 15
0 m
m /n
o ho
le /p
lain
ø 6”
/6-h
ole
ø 6”
/9-h
ole
4 x
5 13
/16”
/7-h
ole
3 1 /
2 x
3 11
/16”
/6-h
ole/
ø 4
5 /16
”
3 1 /
2 x
3 3 /
4”/6
-hol
e/ø
4 5 /
16”
ø 15
0 m
m /6
-hol
e
ø 15
0 m
m /9
-hol
e
100
x 14
7 m
m /7
-hol
e
90 x
94
mm
/6-h
ole /
ø 10
9 m
m
90 x
95
mm
/6-h
ole /
ø 11
0 m
m
Products
44
78/79
71
70
69
68
67
65
62
Page
Sleeves(soft rollers)Belts for satellite sanders
Profile belts
2920 siawood
2951 siatur h
2936 siatur jj
2747 siatur
profile siastar
siavlies rollers
2943 siatur h
2933 siatur
Profile sanding
45
BrushesProfile wheels for bench sanders
Profile wheels for CNC machine centres
Products
slotted rolls and strips
slotted rolls and strips
slotted rolls and strips
slotted rolls and strips
46
68
67
66
65
64
63
59
58
57
56
55
54
52
51
Page
Long beltsEdge belts Belts for surface belt sanders
1913 siawat fc
1796 sialac
1920 siawood
1749 siaral f
1727 siawat fc
2812 siaral x
1939 siawood
1919 siawood
1729 sialac
2933 siatur
2921 siawood
2920 siawood
2936 siatur jj
2918 siapan z
Belt sanding
47
Sleeves(hard sanding rollers)
Manual belt sandersWide belts
Products
48
Areas of useConstructionGrit: garnet Adhesive: hide glue Backing: a-wt paper Grit range: P080 – P280Coating: open P080 – P100 closed P120 – P280
1400 sianor ao
Applications• fine sanding of surfaces (solid wood, veneer)
Advantages• perfect surfaces on solid and veneered work pieces
• specially developed for hand use
• very flexible and versatile
Dimensions Article No. Article IDStandard sheet 230 x 280 mm | 9 x 11” T6001 1977.8896
49
ConstructionGrit: silicon carbide Adhesive: hide glue Backing: a-wt paper Special coating: stearate Grit range: P080 – P400Coating: open P080 – P280 closed P320 – P400
1701 sialac ao
Areas of use
Applications• intermediate sanding of varnish
Advantages• perfect surfaces during intermediate sanding of varnish
• low clogging even on varnishes that tend to smear
Dimensions Article No. Article IDStandard sheet 230 x 280 mm | 9 x 11” T6004 8466.2660 Plain rolls 115 mm x 50 m | 4 1/2” x 55Y T5057 7649.8173
Products
50
Areas of useConstructionGrit: silicon carbideAdhesive: synthetic resinBacking: y-wt cloth, cotton P016 – P036 f-wt paper P040 – P150Grit range: P016 – P150Coating: open
1707 siapar
Applications• keying of insulating boards
• sanding down of plaster, stone and concrete
• sanding down of paint and old varnish
• sanding of solid wood
Advantages• optimally suited for rotary sanding
• fast and safe change of abrasive thanks to siafast
hook-and-loop fastening system
• trouble-free sanding of inside edges
• very high performance in heavy-duty applications
Dimensions Article No. Article IDsiafast discs no hole ø 115 mm | ø 4 1/2” T3807 1323.3054 ø 150 mm | ø 6” T3678 2070.55567-hole ø 150 mm | ø 6” T3305 3175.8083
siafast strips for sanding boardssupplied on request in whatever size you need.
51
Areas of useConstructionGrit: silicon carbideAdhesive: synthetic resinBacking: c-wt paper, water-resistantGrit range: P080 – P1200Coating: closed
1727 siawat fc
Applications• sanding varnish on curved surfaces
• preparation for polishing on high-gloss surfaces
• fine grit sizes for finishing high-gloss varnish
• levelling out of varnish
Advantages• very fine finish
• smooth, even surfaces even on curved work pieces
• adapts readily to contours
• available up to grit size P1200
Dimensions Article No. Article IDStandard sheet 230 x 280 mm | 9 x 11” T6032 9040.4306
Long belts and narrow belts supplied on request in whatever size you need.
Products
52
ConstructionGrit: silicon carbide Adhesive: synthetic resin Backing: e-wt paper Special coating: stearate Grit range: P220 – P800Coating: closed
1729 sialac
Applications• intermediate sanding on industrial varnishing systems
• preparation for polishing on high-gloss surfaces
• intermediate sanding of varnish to sand off raised wood fibres
• removing varnish defects
Advantages• perfect surfaces thanks to TopTec
• optimum surface quality when sanding of industrial
varnishing systems
• dust-free process: antistatic construction gives low dust
formation on belt, work piece and machinery
• extra stearate coating prevents belt clogging
• long product life
Segmented belts, rolls, wide belts, long belts and narrow beltssupplied on request in whatever size you need.
Areas of use
More information about TopTec on page 32– the new generation of sia sanding belts
53
ConstructionGrit: silicon carbide Adhesive: synthetic resin Backing: a-wt paper Special coating: stearate Grit range: P150 – P400Coating: open
1748 siarexx fine
Applications• intermediate sanding of varnishes
• keying of primers and fillers
• fine sanding of profiles and contours
Advantages• very good results with intermediate varnish applications
• low clogging
• for hand and machine use
• fast and safe change of abrasive with siafast hook-and-loop
fastening system
• siasoft for excellent pressure distribution
• siasoft+ for excellent adaptability and finest-quality surfaces
during disc sanding
Dimensions Article No. Article IDStandard sheet 230 x 280 mm | 9 x 11” T3201 9485.0463
siasoft strips 115 x 140 mm | 4 1/2 x 5 1/2” T3204 0199.5922
siafast strips no hole 70 x 125 mm | 2 3/4 x 5” T3202 2419.5013 10-hole 115 x 228 mm | 4 1/2 x 9” T3206 6879.6265
Plain rolls 115 mm x 50 m | 4 1/2” x 55Y T3200 8668.5976
siasoft+ discs 6-hole ø 150 mm | ø 6” T3209 4638.7051 9-hole ø 150 mm | ø 6” T3210 3754.3598
siafast discs no hole ø 150 mm | ø 6” T3284 2968.5006 6-hole ø 150 mm | ø 6” T3207 8703.5206 7-hole ø 150 mm | ø 6” T3285 4073.7533 9-hole ø 150 mm | ø 6” T3208 7819.1753
Areas of use
Products
54
ConstructionGrit: silicon carbide Adhesive: synthetic resin Backing: f-wt paper Grit range: P036 – P400Coating: closed
1749 siaral f
Applications• sanding of edges and surfaces on MDF, HDF and chipboard
• coarse to fine sanding of synthetic resins, composite materials
and fibreglass-reinforced surfaces
• fine sanding of surfaces
• intermediate sanding of varnishes
• fine sanding when working with stone
Advantages• dust-free process: antistatic construction gives low dust
formation on belt, work piece and machinery
• long life when sanding on MDF and HDF sheeting and chipboard
• optimum surface quality during fine sanding of MDF, high-grade
veneers and softwood
• also available as siafast
Dimensions Article No. Article IDsiafast discs no hole ø 115 mm | ø 4 1/2” T3684 2234.2056 ø 125 mm | ø 5” T2241 2453.8834 ø 150 mm | ø 6” T3290 2981.4558 7-hole ø 150 mm | ø 6” T3289 4086.6618 Wide belts, long belts, narrow belts and segmented belts supplied on request in whatever size you need.
Areas of use
More information about TopTec on page 32– the new generation of sia sanding belts
55
ConstructionGrit: silicon carbide Adhesive: hide glue Backing: e-wt paper Grit range: P180 – P800Coating: closed
1796 sialac
Applications• keying and matting of primers
• intermediate sanding of thin varnish layers
• final sanding to prepare for polishing
Advantages• soft construction and flexible bonding ensure finest-quality
surfaces
• for thin, difficult-to-sand varnishes
• where surface gloss is paramount and surface quality is more
important than high levels of performance
Wide belts and long beltssupplied on request in whatever size you need.
Areas of use
Products
56
ConstructionGrit: semi-friable aluminium oxide P060 – P1200 silicon carbide P1500 – P2500Adhesive: synthetic resinBacking: c-wt paper, water resistantGrit range: P060 – P2500Coating: closed
1913 siawat fc
Applications• can be used on oiled surfaces
• sanding of varnish on curved surfaces
• preparation for polishing on high-gloss surfaces
• fine grit sizes can be used on high-gloss varnishes
• removal of varnish defects
Advantages• very fine finish
• even surfaces even on curved work pieces
• adjusts easily to contours
• available up to grit size P2500
• highly water resistant
• may be used wet or dry
Dimensions Article No. Article IDStandard sheet 230 x 280 mm | 9 x 11” T6021 3100.3713
siafast strips no hole 70 x 125 mm | 2 3/4 x 5” T4827 5980.9923
Long belts and narrow belts supplied on request in whatever size you need.
Areas of use
57
1919 siawood
Dimensions Article No. Article IDsiafast discs no hole ø 115 mm | ø 4 1/2” T6077 5903.5767 ø 125 mm | ø 5” T6078 6123.2545 ø 150 mm | ø 6” T6081 6650.8269 6-hole ø 150 mm | ø 6” T6069 2439.7276 7-hole ø 150 mm | ø 6” T6071 7756.0796 9-hole ø 150 mm | ø 6” T6070 1555.3356 Plain rolls 115 mm x 50 m | 4 1/2” x 55Y T4119 2404.8046
Wide belts, hand sanding belts, sleeves, long belts, narrow belts and segmented beltssupplied on request in whatever size you need.
Applications• shaping and fine sanding of inner radii
• flush sanding of edges, edge bands and protrusions
• calibration, medium and fine sanding of surfaces
• keying and matting of primers
• intermediate sanding of varnishes
• final sanding to prepare for polishing
Advantages• perfect surfaces thanks to TopTec
• dust-free process: antistatic construction gives low dust
formation on belt, work piece and machinery
• universal all-around product for wood and varnish
• very versatile
• outstanding performance and long life
• backing keeps its shape and is unaffected by changes in
temperature and humidity
• also available in siafast
Construction Grit: semi-friable aluminium oxide P036 – P220 silicon carbide P240 – P800Adhesive: synthetic resinBacking: f-wt paper P036 – P220 d-wt paper P240 – P800Special coating: stearate P240 – P800Grit range: P036 – P800Coating: open P036 – P120 closed P150 – P800
Areas of use
Products
– the new generation of sia sanding belts More information about TopTec on page 32
58
1920 siawood
Advantages• perfect surfaces thanks to TopTec
• dust-free process: antistatic construction gives low dust
formation on belt, work piece and machinery
• high surface quality when sanding hardwood
• high removal rate and fine surface quality on hardwood
across the entire grit range
• high surface quality using fine grit sizes
Applications• flush sanding of edges, edge bands and protrusions
• calibration, medium and fine sanding of surfaces
• intermediate sanding of polyester varnishes
ConstructionGrit: semi-friable aluminium oxide Adhesive: synthetic resin Backing: f-wt paper Grit range: P060 – P400Coating: closed
Wide belts, sleeves, long belts, narrow belts and segmented beltssupplied on request in whatever size you need.
Areas of use
More information about TopTec on page 32– the new generation of sia sanding belts
59
Wide belts, sleeves, long belts, narrow belts and segmented beltssupplied on request in whatever size you need.
Construction Grit: semi-friable aluminium oxide Adhesive: synthetic resinBacking: f-wt paper Special coating: stearate Grit range: P060 – P220Coating: open
1939 siawood
Applications• flush sanding of edges, edge bands and protrusions
• calibration, medium and fine sanding of surfaces
Advantages• perfect surfaces thanks to TopTec
• dust-free process: antistatic construction gives low dust
formation on belt, work piece and machinery
• ideal for wood that smears or wood containing oils or resins
• very good finish on solid wood and veneer
Areas of use
Products
– the new generation of sia sanding belts More information about TopTec on page 32
60
Construction plain siafastGrit: semi-friable aluminium oxide semi-friable aluminium oxideAdhesive: synthetic resin synthetic resinBacking: c-wt paper P040 – P240 c-wt paper P040 – P100 b-wt paper P280 – P600 b-wt paper P120 – P600Special coating: stearate P080 – P600 stearate P080 – 0600Grit range: P040 – P600 P040 – P600Coating: open P040 – P100 open P040 – P100 closed P120 – P600 closed P120 – P600
1960 siarexx cut
Areas of use
Applications• sanding and removal of paint and varnish
• sanding of solid wood and veneer
• keying and fine sanding of primer and filler
• sanding after wetting
• intermediate sanding of varnishes on surfaces and curves
Advantages• universally applicable to a broad range of applications
• for hand and machine use
• fast and safe change of abrasive with siafast hook-and-loop
fastening system
• for fitting to long sanding boards
• low clogging
Dimensions Article No. Article IDStandard sheet 230 x 280 mm | 9 x 11” T3234 4097.5762
Plain strips 8-hole 80 x 166 mm | 3 1/8 x 6 9/16” T3241 0926.1743 93 x 230 mm | 3 11/16 x 9” T3242 2263.5299 10-hole 115 x 280 mm | 4 1/2 x 11” T3243 9171.9202 no hole 115 x 280 mm | 4 1/2 x 11” T3236 8330.1258 93 x 230 mm | 3 11/16 x 9” T3235 5025.2530
Plain rolls 95 mm x 50 m | 3 3/4” x 55Y T3229 4880.2269 115 mm x 50 m | 4 1/2” x 55Y T3232 3281.1275
61
Dimensions Article No. Article IDStandard sheet 230 x 280 mm | 9 x 11” T3234 4097.5762 siafast strips no hole 70 x 125 mm | 2 3/4 x 5” T3237 6999.7726 81 x 153 mm | 3 3/16 x 6” T3238 3736.3805 115 x 115 mm | 4 1/2 x 4 1/2” T3239 8166.0152 115 x 230 mm | 4 1/2 x 9” T3240 0681.2776 8-hole 81 x 133 mm | 3 3/16 x 5 1/4” T3244 4970.4735 81 x 153 mm | 3 3/16 x 6” T3245 5409.8291 93 x 180 mm | 3 11/16 x 7” T3246 9017.6415 6-hole 100 x 110 mm | 4 x 4 5/16” T3247 4463.3155 115 x 115 mm | 4 1/2 x 4 1/2” T3249 8336.1018 10-hole 115 x 228 mm | 4 1/2 x 9” T3250 1492.1097 14-hole 80 x 133 mm | 3 1/8 x 5 1/4” T6005 8797.6897 siafast rolls 115 mm x 25 m | 4 1/2” x 27 1/2Y T3233 0247.0486
Delta sheets 7-hole 100 x 147 mm | 4 x 5 13/16” T3261 6318.5062 Polygon sheets 6-hole 90 x 94 mm ø 109 mm | 3 1/2 x 3 11/16” ø 4 5/16” T3260 8733.2291 90 x 95 mm ø 110 mm | 3 1/2 x 3 3/4” ø 4 5/16” T3259 3290.5689 siafast discs no hole ø 115 mm | 4 1/2” T3251 6779.8996 ø 125 mm | 5” T3252 6999.5774 ø 150 mm | 6” T3253 7548.7719 ø 300 mm | 12” T3254 0811.2845 6-hole ø 150 mm | 6” T3257 3337.6726 7-hole ø 150 mm | 6” T3288 8654.0246 8-hole ø 115 mm | 4 1/2” T3255 7568.7492 ø 125 mm | 5” T3256 8502.6854 9-hole ø 125 mm | 5” T6751 4102.2332 ø 125 mm | 5” T3282 3919.0489 ø 150 mm | 6” T3258 2453.2806 15-hole ø 150 mm | 6” T3339 7762.1484
Products
62
Areas of use
Long belts, narrow belts, rolls, slotted rolls and slotted strips supplied on request in whatever size you need.
This product contains cryolite and must be disposed of as a hazardous waste (2000 / 532 / EC) (EWC-SN 120120).
2747 siatur
Applications• profile sanding of MDF
• intermediate sanding of varnished profile work pieces
• ultrafine sanding
• preparation for polishing on high-gloss varnish
• for radii greater than 5 mm in profile belt sanding
Advantages• long product life on wood-based materials
• very flexible
• available in ultrafine grit sizes
• very high surface quality
• adjusts easily to suit profiles and contours
ConstructionGrit: silicon carbideAdhesive: synthetic resinBacking: j-wt cloth, cotton P060 – P120 jj-wt cloth, cotton P180 – P600 h-wt cloth, cotton P800 – P1000Special coating: stearate (P600 - P1000) Grit range: P060 – P1000Coating: closed
63
ConstructionGrit: mixed grit types P016 – P120 silicon carbide P150 – P220Adhesive: synthetic resinBacking: y-wt cloth, cotton P016 – P100 x-wt cloth, cotton P120 – P220Grit range: P016 – P220Coating: closed
2812 siaral x
Applications• flush sanding of protrusions on cross-grained wood
• flat sanding of edges and edge bands
• coarse sanding of wood-based panels and hardwood
• coarse to fine sanding in the manufacturing of parquet
and plywood
• coarse to fine sanding of glued solid-wood panels
Advantages• long service life thanks to robust backing and optimised
coating technology
• extremely high performance when preparing hardwood with
coarser grit sizes
• high surface quality with fine grit sizes
Wide belts and long beltssupplied on request in whatever size you need.
Areas of use
Products
64
Areas of use
2918 siapan z
Advantages• perfect surfaces thanks to TopTec
• dust-free operation: antistatic construction gives low dust
formation on belt, work piece and machinery
• high lateral belt stability, segmentable
• for continuous, very heavy-duty use, washable
• High removal rate when working on softwood and hardwood
with coarser grits
ConstructionGrit: semi-friable aluminium oxideAdhesive: synthetic resinBacking: z-wt cloth, polyesterGrit range: P036 – P120Coating: open P036 – P060 closed P080 – P120
Wide belts and segmented beltssupplied on request in whatever size you need.
Applications• industrial coarse sanding of various types of solid wood
• coarse to medium sanding in plywood manufacturing
• coarse to fine sanding of glued solid-wood panels
More information about TopTec on page 32– the new generation of sia sanding belts
65
ConstructionGrit: semi-friable aluminium oxideAdhesive: synthetic resinBacking: y-wt cloth, cotton P016 – P050 x-wt cloth, cotton P060 – P320Grit range: P016 – P320Coating: open P016 – P120 closed P150 – P320
2920 siawood
Areas of use
Applications• flush sanding of edges and rabbets
• fine sanding of surfaces and edges
• coarse to fine sanding in plywood manufacturing
• coarse to fine sanding of glued softwood panels
• sanding down of old varnish and paint
Advantages• perfect surfaces thanks to TopTec
• dust-free process: antistatic construction gives low dust
formation on belt, work piece and machinery
• long service life thanks to robust backing
• high removal rate in coarser grit sizes on softwood and
hardwood
Dimensions Article No. Article IDsiafast discs no hole ø 115 mm | ø 4 1/2” T6754 7608.9528
Wide belts, hand sanding belts, sleeves, long belts and narrow beltssupplied on request in whatever size you need.
Products
– the new generation of sia sanding belts More information about TopTec on page 32
66
Hand sanding beltssupplied on request in whatever size you need.
Areas of use
2921 siawood
Applications• sanding down of old varnish and paint
• flush sanding of edges and edge bands
• sanding down of solid wood
Advantages• long service life thanks to robust backing
• optimised for portable belt sanding
ConstructionGrit: semi-friable aluminium oxideAdhesive: synthetic resinBacking: x-wt cloth, cottonGrit range: P036 – P120Coating: open
67
ConstructionGrit: semi-friable aluminium oxideAdhesive: synthetic resinBacking: j-wt cloth, cottonGrit range: P060 – P220Coating: open
2933 siatur
Areas of use
Applications• coarse to fine sanding on curves and profiles
• sanding down of old varnish
• flush sanding of edges and protrusions
• pre- and posttreatment of surfaces and curves
• particularly suitable for pneumatic rollers
• for radii greater than 10 mm during profile belt sanding
Advantages• perfect surfaces thanks to TopTec
• dust-free process: antistatic construction gives low dust
formation on belt, work piece and machinery
• high dimensional accuracy during profile belt sanding
• adapts to contours, curves and profiles
• long product life during sanding of softwood and wood
containing resins
Hand sanding belts, sleeves, long belts, narrow belts, slotted rolls and slotted strips supplied on request in whatever size you need.
Products
– the new generation of sia sanding belts More information about TopTec on page 32
6868
Areas of useConstructionGrit: semi-friable aluminium oxideAdhesive: synthetic resinBacking: jj-wt cloth, cottonGrit range: P060 – P320Coating: closed
2936 siatur jj
Applications• shaping and fine sanding of profiles and contours
• intermediate sanding of curves and profiles
• especially suitable for pneumatic rollers
• particularly suitable for sanding brushes
• for radii greater than 5 mm during profile belt sanding
Advantages• high dimensional accuracy during profile belt sanding
• optimally suited for hand sanding of turned work pieces
• very adaptable to contours, curves and profiles
• can be torn to any size required
Dimensions Article No. Article IDPlain rolls 100 mm x 50 m | 4” x 55Y T3631 0662.2534 115 mm x 50 m | 4 1/2” x 55Y T5059 4446.8229
Narrow belts, sleeves, long belts, rolls, slotted rolls and slotted strips supplied on request in whatever size you need.
More information about TopTec on page 32– the new generation of sia sanding belts
69
Dimensions Article No. Article IDsiafast sheets 435 mm x 1 m | 17 1/4 x 39 1/2” T6838 3018.5932 650 mm x 1 m | 25 9/16 x 39 1/2” T6839 0779.9568
Profile sanding set Languages: German, French, Italian, English, Spanish, Flemish T7844 0020.0499
siaklett 700 x 500 mm | 28 x 19 1/2” T6999 5797.3499 Contact adhesive 100º 425 g | 15 oz T7071 0020.0379 PUR disc ø 180 x 30 mm | ø 7 x 1 3/16” T7070 0020.0378 ø 180 x 50 mm | ø 7 x 2” T7069 0020.0377
ConstructionGrit: semi-friable aluminium oxideAdhesive: synthetic resinBacking: h-wt cloth, mixed fibresGrit range: P080 – P240Coating: closed
2943 siatur h
Areas of use
Applications• fine sanding of profiles in hardwood and softwood as
well as MDF
• sanding of curves and raised panels
• sanding of curved work pieces
Advantages• unique abrasive, elastic in marked direction
• very well suited for profile sanding on automatic moulders and
double-sided moulder sanders
• especially well suited for profile sanding on CNC machines
• fast and safe change of abrasive thanks to the siafast hook-and-
loop fastening system
Products
70
ConstructionGrit: semi-friable aluminium oxideAdhesive: synthetic resinBacking: h-wt cloth, cottonGrit range: P040 – P600Coating: closed
2951 siatur h
Areas of use
Applications• medium to fine sanding of curves and profiles
• keying of primers and fillers
• intermediate sanding of varnish on curves and profiles
• suitable for sanding brushes
• for radii greater than 2 mm during profile belt sanding
Advantages• universally applicable to a broad range of applications
• can be torn to any size required
• high dimensional accuracy during profile belt sanding
• extremely adaptable to contours, curves and profiles
• siasoft version gives excellent pressure distribution during
hand sanding
Dimensions Article No. Article IDPlain rolls 115 mm x 50 m | 4 1/2” x 55Y T5147 4770.6033 siasoft rolls 115 mm x 10 m | 4 1/2” x 11Y T3864 6581.1109 siasoft strips 115 x 140 mm | 4 1/2 x 5 1/2” T3860 6269.3860
Rolls, sleeves, narrow belts, slotted rolls and slotted strips supplied on request in whatever size you need.
71
Areas of useConstructionGrit: aluminium oxide silicon carbide Adhesive: synthetic resin Backing: polyamide fibreGrit range: extra cut – ultra fineCoating: sprayed on
6120 siavlies
Applications• keying and matt finishing on varnish and paint
• removing spray vapour
• sanding of paintwork treated with stripping agents
• sanding of profiled and rounded work pieces
Advantages• extremely flexible and very adaptable to various shapes
• 3-dimensional grit penetration
• very low clogging
• resistant to alkalis and solvents
• very long product life
• very low flammability and thus a safe alternative to steel wool
Dimensions Article No. Article IDsiavlies rolls 100 mm x 10 m | 4” x 11Y N7056 9327.7238 115 mm x 10 m | 4 1/2” x 11Y N7900 3144.5052 125 mm x 10 m | 5” x 11Y N7013 2344.9555 siavlies sheet 152 x 229 mm | 6 x 9” N7058 4132.9840
siavlies discs plain /no hole ø 150 mm | ø 6” N7012 4448.9250 siafast /7-hole ø 150 mm | ø 6” N4318 5645.6768
siavlies rollersavailable on request.
You can find more nonwoven products in the
special siavlies brochure.
Products
72
for finishing scratch-resistant surfaces
• velvet net-backed abrasive
• foam cushioning
• siafast fastening system
ConstructionGrit: diamondAdhesive: synthetic resinBacking: knitted fabric with foam backingGrit range: P500, P1000Coating: special coating process
siacarat velvet
Areas of use
Applications• sanding of scratch-resistant varnish systems
• ultrafine sanding of mineral-based materials
• finishing of epoxy-based materials
• matt finishing and smoothing out of very hard surfaces
such as scratch-resistant clear varnishes
Advantages• High-performance diamond abrasive minerals give maximum
product life
• lasts up to 40 times longer than conventional abrasives
• water- resistant and washable
• adapts very readily to shaped contours
• low scratch depth with high stock removal
• foam backing equalises pressure and prevents undercutting
Dimensions Article No. Article IDDiscs no hole ø 80 mm | ø 3 1/8” T5095 8451.8686 ø 150 mm | ø 6” T5096 9967.9911
73
for the perfect Swiss finish
• velvet net-backed abrasive
• foam cushioning
• siafast fastening system
Areas of useConstructionGrit: white aluminium oxideAdhesive: synthetic resinBacking: knitted fabric with foam backingGrit range: P240 – P4000Coating: special process
siaair velvet
Applications• ultrafine sanding of mineral-based materials and paint
• polishing preparation for high-gloss surfaces
• sanding of UP and PUR varnishes prior to polishing
• final sanding of mineral-based materials
Advantages• very long product life
• low scratch depth with high stock removal
• foam backing equalises pressure and prevents undercutting
• water-resistant and washable
• adapts very easily for sanding edges
• low clogging when used for dry sanding
Dimensions Article No. Article IDDiscs no hole ø 80 mm | ø 3 1/8” T3306 3647.2462 ø 150 mm | ø 6” T3307 5163.3687 Strips 115 x 140 mm | 4 1/2 x 5 1/2” T3308 6329.7598
Products
74
3
C
21
3
A
3
B
fi ne
super fi ne super fi ne white
medium
coarse
medium fi ne
K120
K100
K060
K040
K036
K024P120
K150
K180
P150 P180 P220 P240 P280 P320 P400 P500 P600
K080
Entspricht in etwa der Oberfl ächengüte
P800
Ents
pric
ht d
er K
orng
röss
e
Adaptable to shapeEqualises application pressureLow clogging
• very adaptable to shape (C), especially on profiled or hard-to-reach surfaces
• abrasive does not crease or fold, giving a uniform, scratch-free finish
• excellent pressure distribution thanks to the use of an application-specific foam density, resulting in a uniform finish (B)
• no undercutting of varnish because the soft backing material prevents localised pressure from the fingers
Key1 Abrasive grit brown/white aluminium oxide 2 Adhesive flexible grit bond 3 Foam range of material hardness
• The combination of a soft backing material and a flexible grit bond reduces clogging because the dust is continually moved out from the spaces between the grit (A)
• abrasive suitable for many different applications
Foam abrasives
For full details please see our «Foam
Abrasives» brochure Approximate surface quality
Equi
vale
nt g
rit
size
Choosing the correct grit size
The combination of a soft backing material and a flexible grit bond has a critical effect on surface quality
75
Areas of useConstructionGrit: brown aluminium oxideCoating: 4-sidedBacking: solvent-free PUR foam Foam density: firm for high stock removal Grit range: coarse, medium, medium fine, fine, super fine
Standard block
ApplicationsPaint and fillers
• sanding down of paint, filler and old paint
• keying of wood, metal and plastic prior to application of paint
• keying of paint inside rebates and on flat surfaces
• removing paint runs and coating defects, e.g. trapped dirt
particles
Varnish
• sanding prior to varnishing
• intermediate sanding of varnish on surfaces, rabbets and
gentle curves
• removing paintwork defects
Advantages• Very aggressive and robust even with uniform surface quality
• coated on all four sides, ideal for use inside rabbets and on flat
surfaces
• for use on wood, paint and varnish in the processing industries
• low clogging
Dimensions Article No. Article IDStandard block coarse 68 x 97 x 27 mm | 2 11/16 x 3 13/16 x 1 1/16” T2274 0020.4166 medium 68 x 97 x 27 mm | 2 11/16 x 3 13/16 x 1 1/16” T2274 0020.4167 medium finem 68 x 97 x 27 mm | 2 11/16 x 3 13/16 x 1 1/16” T2274 0020.4168 fine 68 x 97 x 27 mm | 2 11/16 x 3 13/16 x 1 1/16” T2274 0020.4169 super fine 68 x 97 x 27 mm | 2 11/16 x 3 13/16 x 1 1/16” T2274 0020.4170 Combination block fine 68 x 97 x 27 mm | 2 11/16 x 3 13/16 x 1 1/16” T2276 0020.4171
Products
76
Areas of useConstructionGrit: brown aluminium oxideCoating: 2-sidedBacking material: solvent-free PUR foamFoam density: extra soft for mouldability Grit range: coarse, medium, medium fine, fine, super fine
Standard pad
ApplicationsPaint and fillers
• keying undercoat prior to applying paint
• keying of paint and filler on flat surfaces and profiles
• intermediate sanding prior to application of subsequent coat
Varnish
• sanding of wood prior to varnishing
• intermediate sanding on curves, raised panels and raised
mouldings
• removing minor varnish defects
• fine sanding after wet treatment
Advantages• pressure-equalising foam gives perfect surface finish
• no undercutting during intermediate sanding due to excess
application of pressure
• moulds itself to the work piece
• can be used wet or dry
• low clogging
Dimensions Article No. Article IDStandard pad coarse 97 x 120 x 12 mm | 3 13/16 x 4 3/4 x 1/2” T2272 0020.4160 medium 97 x 120 x 12 mm | 3 13/16 x 4 3/4 x 1/2” T2272 0020.4161 medium fine 97 x 120 x 12 mm | 3 13/16 x 4 3/4 x 1/2” T2272 0020.4162 fine 97 x 120 x 12 mm | 3 13/16 x 4 3/4 x 1/2” T2272 0020.4163 super fine 97 x 120 x 12 mm | 3 13/16 x 4 3/4 x 1/2” T2272 0020.4164
77
Areas of useConstructionGrit: white aluminium oxide Coating: single-sided Backing: EVA foamFoam density: soft for maximum mouldabilityGrit range: K280, K500, K800, K1000, K1500
Flat pad
Applications• keying of factory primers
• keying of plastics prior to applying filler
• final sanding of filler in areas that are hard to reach
• producing a matt finish on varnishes
• producing a matt finish on difficult varnish types
Advantages• pressure-equalising foam gives perfect surfaces
• no undercutting in intermediate sanding due to excess
application of pressure
• moulds itself to the work piece
• can be used wet or dry
Dimensions Article No. Article IDFlat pad medium 115 x 140 x 5 mm | 4 1/2 x 5 1/2 x 3/16” T2275 020.3794 fine 115 x 140 x 5 mm | 4 1/2 x 5 1/2 x 3/16” T2275 020.3795 extra fine 115 x 140 x 5 mm | 4 1/2 x 5 1/2 x 3/16” T2275 020.3796 super fine 115 x 140 x 5 mm | 4 1/2 x 5 1/2 x 3/16” T2275 020.3797 micro fine 115 x 140 x 5 mm | 4 1/2 x 5 1/2 x 3/16” T2275 020.3798
Products
78
Areas of use
Product Dimensions Radius Grit Article No. Article ID«Standard» radius ø 120 x 20 mm | 4 3/4 x 3/4” 2 mm | 3/32” P100 T6333 0020.3573 P120 T6333 0020.3574 P150 T6333 0020.3575 3 mm | 1/8” P100 T6334 0020.3576 P120 T6334 0020.3577 P150 T6334 0020.3578 4 mm | 5/32” P100 T6335 0020.3579 P120 T6335 0020.3580 P150 T6335 0020.3581 5 mm | 3/16” P100 T6336 0020.3582 P120 T6336 0020.3583 P150 T6336 0020.3584
ConstructionGrit: semi-friable aluminium oxide Backing: foamBacking base: jj-wt cloth Grit range: P100, P120, P150Abrasive: 2936 siatur jj
profile siastar
Applications• CNC machining centres, automatic edge-bevelling
machines and bench sanders
• sanding of curves, rabbets, chamfers and edges
• finishing of wood and wood-based materials
Advantages• ultrafast changeovers
• sophisticated adapter system
• foam backing for gentle sanding
• standardised product range
• multifunctional use
• special profiles on request
79
For full details please see our «Profile Sanding
Systems» brochure
Product Dimensions Radius Grit Article No. Article ID«High edge» radius ø 120 x 60 mm | 4 3/4 x 2 3/8” 5 mm | 3/16” P100 T6337 0020.3585 P120 T6337 0020.3586 P150 T6337 0020.3587 6 mm | 1/4” P100 T6338 0020.3588 P120 T6338 0020.3589 P150 T6338 0020.3590 8 mm | 5/16” P100 T6339 0020.3591 P120 T6339 0020.3592 P150 T6339 0020.3593 10 mm | 13/32” P100 T6340 0020.3594 P120 T6340 0020.3595 P150 T6340 0020.3596
45° chamfer ø 120 x 20 mm | ø 4 3/4 x 3/4” P100 T6341 0020.3604 P120 T6341 0020.3605 P120 T6341 0020.3599
90° cylinder/rebate ø 100 x 60 mm | ø 4 x 2 3/8” P100 T6342 0020.3606 P120 T6342 0020.3607 P150 T6342 0020.3608
Adapter for CNC machine T6343 0020.3609
Adapter for bench sander Spindle 30 mm | 1 3/16” T6344 0020.3603
Thrust ring ø 100 mm | ø 4” T6345 0020.3610
Special profiles and additional grit sizes (P080 – P320) available on request.
Products
80
Dimensions Art. No. Art. ID
Dimensions Art. No. Art. ID
Dimensions Grit Art. No. Art. ID
siafast hand sanding block 70 x 125 mm | 2 3/4 x 5” T7055 0020.0342medium hard/extra soft
siafast cork sanding block 70 x 125 mm | 2 3/4 x 5” T8435 0020.0095hard siafast wet sanding block 70 x 125 mm | 2 3/4 x 5” T7053 0020.0343hard/soft
siafast sanding disc pad ø 150 mm | ø 6” T7060 0020.0364soft
Hand sanding blocks
8-hole 79 x 166 mm | 3 1/8 x 6 9/16” T7043 6657.00818-hole 80 x 150 mm | 3 1/8 x 6” T7044 0182.33778-hole 92 x 230 mm | 3 5/8 x 9” T7045 1853.852610-hole 113 x 280 mm | 4 7/16 x 11” T6952 7514.5735no hole 115 x 280 mm | 4 1/2 x 11” T6954 7088.2671
no hole ø 150 mm | ø 6” T6945 9692.0437
no hole ø 178 mm | ø 7” T6945 0330.7046no hole ø 200 mm | ø 7 7/8” T6945 0801.0225
Conversion set
plate brush M14 130 x 50 mm | 5 1/8 x 2” K046 T7067 0020.0495
K060 T7067 0020.0358 K080 T7067 0020.0359 K120 T7067 0020.0360
circular brush M14 140 x 30 mm | 5 1/2 x 1 3/16” K060 T7068 0020.0361 K080 T7068 0020.0362 K120 T7068 0020.0363
siabrosse brushes
Accessories
81
Dimensions Art. No. Art. ID
Dimensions Art. No. Art. ID
Dimensions Art. No. Art. ID
Accessories
10 mm | 13/32” felt 110 x 250 mm | 4 5/16 x 9 7/8” T7580 5940.1342 110 x 333 mm | 4 5/16 x 13 1/8” T7584 7733.1423 120 x 250 mm | 4 3/4 x 9 7/8” T7581 5140.5845 140 x 250 mm | 5 1/2 x 9 7/8” T7582 3541.4384 140 x 333 mm | 5 1/2 x 13 1/8” T7586 5334.4932
no felt 110 x 250 mm | 4 5/16 x 9 7/8” T7588 6860.3508 110 x 333 mm | 4 5/16 x 13 1/8” T7592 8653.2589 120 x 250 mm | 4 3/4 x 9 7/8” T7589 6060.8011 140 x 250 mm | 5 1/2 x 9 7/8” T7590 4461.7017 140 x 333 mm | 5 1/2 x 13 1/8” T7594 6254.7098
Sanding-pad coating – self-adhesive graphite coating
microfibre dust cloth 380 x 380 mm | 15 x 15” T8496 0020.3185
dust cloth 320 x 400 mm | 12 9/16 x 15 3/4” T8368 0020.0016 650 x 750 mm | 25 9/16 x 29 1/2” T8348 0020.0088
Dust cloths
roll holder 235 x 605 x 365 mm | 9 1/4 x 23 3/4 x 14” T6963 0020.0397
Roll holder
Products
82
Version Dimensions Article No. Article ID
Backing pad 5/16” 8-hole hard ø 125 mm | ø 5” T6938 0020.0539 8-hole extra soft ø 125 mm | ø 5” T6939 0020.0540 15-hole medium hard ø 125 mm | ø 5” T6940 0020.3194 15-hole extra soft ø 125 mm | ø 5” T6941 0020.3191 no hole hard ø 150 mm | ø 6” C7036 0020.0345 no hole soft ø 150 mm | ø 6” C7019 0020.0346 Backing pad 5/16” + M8 7-hole hard ø 150 mm | ø 6” T7200 0020.2296
Air-chamber pad with adapter 5/16” + M8 7-hole soft ø 150 mm | ø 6” T7201 0020.2334 7-hole extra soft ø 150 mm | ø 6” T7202 0020.2335 15-hole hard * ø 150 mm | ø 6” T7203 0020.4091 15-hole soft * ø 150 mm | ø 6” T7204 0020.4092 15-hole extra soft * ø 150 mm | ø 6” T7205 0020.4093
Aerodynamic pad 5/16” + M8 7-hole soft ø 150 mm | ø 6” T7206 0020.3509 7-hole extra soft ø 150 mm | ø 6” T7207 0020.3510
Intermediate pad 7-hole ø 150 mm | ø 6” T6740 0020.2615 9-hole ø 150 mm | ø 6” T6741 0020.0252 15-hole ø 125 mm | ø 5” T6942 0020.3193
Protection disc for siaair velvet ø 145 mm | ø 5 11/16” T3309 0020.3453
* fits 150 mm | 6” discs with 6, 7, 9 or 15 holes
Backing pads
83
sia online
www.sia-abrasives.com
06.165.en.0908 Article ID: 0020.4622.01 © by sia Abrasives Industries AG – All rights reserved
Australia sia Abrasives Australia Pty. Ltd.Rowville, Vic.3178Phone +61 3 9753 4333
Austria sia Abrasives GmbH 6130 SchwazPhone +43 5242 73 666
Belgium sia Abrasives Belgium NV SA 1730 Mollem (Asse)Phone +32 2 454 00 28
Brazil sia Abrasivos Industriais Ltda São José dos Pinhais, PR, CEP 83065-190Phone +55 41 382 53 33
China sia Abrasives Company Ltd., Aberdeen, HongkongPhone +852 2553 8300
France sia Abrasives France Sarl95972 Roissy Charles de Gaulle CedexPhone +33 1 48 17 80 90
Germanysia Abrasives Deutschland GmbH 42699 SolingenPhone +49 (0) 212 258 19-40
part GmbH72574 Bad UrachPhone +49 (71) 25 96 96 5-00
Mexiko sia Abrasivos México S.A. de C.V. 01050 México, D.F.Phone +52 55 26 15 88 97
Singapore sia Abrasives Industries AGRepresentative Office SingaporeNo. 9 Kaki Bukit Road 1Singapore 415938Phone +65 6743 7350
Spain sia Abrasives España SA 28830 Pol. Ind. San Fernando de Henares (Madrid)Phone +34 91 678 41 50
Switzerland sia Abrasives Industries AG8501 FrauenfeldPhone +41 52 724 41 11
United Kingdom sia Abrasives (G.B.) Ltd.Greetland, Halifax HX4 8NJ West Yorkshire Phone +44 1422 31 30 00
sia Fibral Ltd.Greetland, Halifax HX4 8NJ West YorkshirePhone +44 1422 31 30 00
sia Abrafoam Ltd.Alfreton, Derbyshire DE55 7FQPhone +44 1773 83 25 24
USA sia Abrasives, Inc. USA Charlotte, NC 28273Phone +1 704 587 73 55
www.sia-abrasives.com
Foam sanding pads in the widest possible range of shapes and grades for precision san-ding on wood, fillers, paintwork and varnish.
Products on special polyester film to give defined surface structures in the areas of graphics, optics and the auto industry.
Foam abrasives
Nonwoven products for preparation and cleaning tasks and for structuring, especially on metal.
Classic flexible abrasives and systems for conventional surface treatment on all types of material.
The sia Group is based in Frauen feld, Switzerland, and is one of the world’s top three suppliers of innovative abrasives. sia develops, manufactures and sells complete sanding systems tailored to specific requirements and applications of all kinds, transforming sanding into surface technology. sia Abrasives em -ploys about 1150 people and is represented in more than 80 countries.
sia Abrasives – Your key to a perfect surface
sia Abrasives Industries AG, Frauenfeld/Switzerland
Microabrasives
Nonwoven abrasivesCoated abrasives