3

T P C 2 3 3

2171 TEXTILE TESTING & QUALITY CONTROL-IV

AIMS :

• To familiarize the students with the techniques of textile testing and quality control.

• To enable to operate different machines used for this purpose. • To provide basic skill to analyze different result sheet. • To make the student familiarize with modern testing machines and system.

Short Description :

Understand, Quality control, Statistical quality control, Control chart, Process control in spinning, weaving, finishing and clothing, Fabric quality, Apparel quality, HVI, AFIS, Classimate and ISO.

Detail Description :

Theory :

1.0 Understand Quality control, Statistical quality control and Control chart.

1.1 Define quality control, statistical quality control, control chart with its interpretation.

1.2 Mention different limits, rules and procedure to construct a control chart. 1.3 Describe about different types of control chart 1.4 Construct control chart from given data.

2.0 Understand process control in spinning, weaving, finishing and clothing

2.1 Discuss process control 2.2 Classify process control and state the steps of process control 2.3 Define and distinguish process control and product control. 2.4 Mention and describe the process control measures at different stages and also

the steps taken in spinning weaving, finishing and clothing

3.0 Understand fabric quality

3.1 State the quality parameters of woven, knitted and non-woven fabrics. 3.2 Describe the fabric faults produced during weaving, knitting and non-woven fabric production 3.3 Discuss the fabric faults produced during finishing of woven and knitted fabrics

4 4.0 Understand apparel quality

4.1 List the quality control activities for apparel manufacturing 4.2 Define TAP, AQL. 4.3 Mention the quality parameters for assessing sewability and defects caused during sewing 4.4 State the co-relation between fabric quality and apparel quality 4.5 List the defects of zippers, spreading, patterns, cuttings sewing, seaming and assembling.

4.6 Mention the operation for controlling fusing, screen printing. embroidering and pressing/finishing.

5.0 Understand USTER statistics.

5.1 Describe USTER statistics.

5.2 How to prepare USTER statistics.

5.3 Discuss about the application of USTER statistics.

6.0 Understand Classimate.

6.1 State classimate 6.2 Classify the faults by classimates. 6.3 Explain the assessment of faults. 6.4 Mention the control measures to reduce faults

7.0 Understand Evenness tester.

7.1 Discuss the concept of evenness testing.

7.2 Explain the techniques of measurement by evenness testing

7.3 State the types of yarn faults and faults measurement by evenness tester.

7.4 Define U%, CV% & I% and state the testing mode of evenness tester.

7.5 Describe diagram, spectrogram & discuss the methods of interpretation of

USTER curve.

8.0. Understand HVI

8.1. Define HVI 8.2 State the tests that can be done by HVI machine in different module. 8.3. Mention the merits of HVI machine 8.4. Discuss about the operational procedure of HVI and interpretation of HVI

results.

5 9.0 Understand AFIS

9.1 Describe AFIS 9.2 Mention the tests that can be done by AFIS in different module 9.3 Discuss about the operational procedure of AFIS and analysis of AFIS result. 9.4. Define calibration of cotton. 9.5 Classify calibration of cotton. 9.6 Describe the importance of calibration of cotton. 10.0 Understand ISO 10.1 Define ISO with its objectives and Principles 10.2 State the importance of ISO certification 10.3 Describe the steps for getting ISO quality certificate. 10.4 Describe the steps of awarding ISO certificate 10.5 Discuss about the functions and quality of quality control personnel Practical:

1. Calibrate HVI with calibrating cotton. 2. Perform test with HVI and evaluate the test results. 3. Calibrate AFIS with calibrating cotton. 4. Perform test with AFIS and evaluate the test results. 5. perform test with Uster tester and evaluate the test results. 6. perform test with classimate and evaluate the test results 7. Construct control chart and evaluate the chart for different count of yarn. 8. Construct control chart and evaluate the chart for twist regularity and strength of

different count and type of yarn.

Book references:

1. Quality control in cotton spinning- Md ashraful Islam 2. Process control in spinning- A. R. brade & T.A Subramaniam 3. Testing and quality Management V.K. Kothari. 4. Handbook of textile testing and Quality control Gover & Homby. 5. Sitra focus- SITRA. Conmbatore, India. 6. Testile Testing, Fibre yarn & fabric- Dr. Arindham Basu 7. ÷¨vwUmwUKm A¨vÛ †KvqvwjwU K‡Ûvj- †gvt gwReyi ingvb|

6

T P C 2 3 3

2271 ADVANCED SHORT STAPLE SPINNING-II AIMS:

1. To develop advance knowledge of special type short staple spinning. 2. To enable to understand the concepts of open end spinning machinery. 3. To develop the knowledge of blended yarn.

SHORT DESCRIPTION Blended yarn processing, Cotton blended yarn, Special type of spinning i.e warp spinning, Core spinning & Condensed yarn spinning. DETAIL DESCRIPTION Theory Blended Yarn. 1.0 Understand the polyester cotton blended yarn

1.1 State the importance of blended yarn 1.2 State the properties of fibres considered for P/C blended yarn. 1.3 Mention the blending ratio of polyester & cotton for different count of p/c

blended yarn 1.4 Mention the properties, merits & demerits, uses of p/c blended yarn.

2.0 Understand the techniques of polyester and cotton blended yarn processing. 2.1 Show the flow chart of p/c blended yarn processing. 2.2 Explain the reasons for processing the polyester in blow room and blending in

drawing frame. 2.3 Mention the necessary changes to be done for p/c blended yarn production from

blow room section to ring frame. 2.4 Discuss the necessities and methods of setting for p/c blended yarn. 2.5 Solve the relevant problems of p/c blended yarn production.

3.0 Understand viscose cotton blended yarn. 3.1 Show the flow chart of viscose cotton blended yarn production. 3.2 Mention the necessary changes/works to be done for viscose cotton blended

yarn production from blow room section to ring frame 3.3 Mention the properties, merits and demerits, uses of viscose- cotton blended

yarn.

7 4.0 Understand wrap spinning.

4.1 State the principle of warp spinning operation. 4.2 Discuss the history of development of wrap spinning & working procedure of

wrap spinning machines with technical details. 4.3 Mention the raw material requirements for wrap spinning. 4.4 State the warp yarn characteristics with applications.

5.0 Understand core yarn spinning. 5.1 Define core spun yarn with the method of production. 5.2 Discuss the method of manufacturing core-spun yarn by the following process-

a) Ring frame b) O.E. Rotor frame c) Friction spinning d) Air jet spinning

5.3 Mention the raw material required for core-spun yarn. 5.4 Mention the application of core-spun yarn.

6.0 Understand condensed yarn spinning. 6.1 State the necessities of condensed yarn spinning. 6.2 Discuss the following process –

a) DREF Compact spinning b) COM for spinning process c) Elite spinning system.

6.3 State the yarn properties, merits & demerits of condensed yarn spinning.

7.0 Understand different types of yarns and Technical Textile. 7.1 Briefly describe about the introduction manufacturing process of-

a) Mélange yara b) Fancy yarn

7.2 Define technical textiles with its end-uses. 7.3 Discuss briefly about the following Technical Textile-

a) Protection textile, b) Medical fabrics, c) Agricultural fabrics, d) Filter fabrics, e) Tarpaulins & covers, f) Textile composites & g) Tyre cords.

8.0 Understand spin plan 8.1 State the importance of spin plan 8.2 Mention the factors to be considered for calculation spin plan. 8.3 State parameters, types of parameters and value of different parameters for

different count and systems (conventional, modern)

8

8.4 Prepare spin plan for different count 2 system (conventional, modern). Practical :

1. List the necessary change places from blow-room ting frame for P/C blended yarn production.

2. Demonstrate the process of twist setting. 3. List the necessary change places from blow room to ring frame for viscose

cotton blended yarn production. 4. Demonstrate the working principle of wrap spinning machine. 5. Demonstrate the working principle of producing core spun.yarn by-

a) Ring spinning process b) Rifer spinning process c) Rotor spinning process d) Air jet spinning process

Book references: 1. New spinning system- Nodal centre for up gradation of textile education

(NICTE) 2. New spinning processes- w klein. 3. yarns and technical textiles- K. P. chellamani & Debasis chattapadh yay. 4. Textiles Fibre to fabric- Corbman 5. Textiles- Norma Hollen, jane saddles & Anna L. Langford.

9 2371 ADVANCED WEAVING-II T P C

2 3 3

AIMS

1. To develop advanced knowledge of special type of woven products.

2. To enable to understand the concepts of special type of weaving machinery.

3. To develop the knowledge of quality control of special woven products

4. To develop the knowledge of weaving defects and weaving wastage.

5. To develop the knowledge of weaving costing and weavers load

SHORT DESCRIPTION

Special type of woven products and machineries i.e. lace, braid, lappet, swivel, net

and terry fabric, weaving defects, loom faults, weaving efficiency, weaving wastage &

costing.

DETAIL DESCRIPTION

Theory:

1.0 Understand the lace fabric.

1.1 Define lace fabric.

1.2 Discuss the basic principle for lace production.

1.3 Mention the characteristics of lace fabric.

1.4 State the characteristics of yarn used in lace production.

1.5 List the names of lace making machinery.

1.6 State the uses of lace.

2.0 Understand the braid fabric.

2.1 Define braid fabric.

2.2 State the classification of braid.

2.3 Mention the characteristics of braid.

10

2.4 Describe the methods of braid production.

2.5 Discuss the technical difficulties of braid production.

2.6 State the uses of braid fabric.

3.0 Understand the net fabrics.

3.1 Define net fabric.

3.2 State knotted and knitted nets.

3.3 Distinguish between knotted and knitted nets.

3.4 Compare between lace and net fabric.

3.5 Mention the uses of net fabrics.

4.0 Understand the lappet weaving

4.1 Define lappet weaving.

4.2 Discuss the basic principle of lappet fabric production.

4.3 State the characteristics of lappet weaving.

4.4 Mention the uses of lappet fabric.

5.0 Understand the swivel weaving.

5.1 Define swivel weaving.

5.2 Discuss the basic principle of swivel weaving.

5.3 Mention the objects swivel weaving.

5.4 Discuss the characteristics of swivel fabric.

5.5 Compare between swivel and lappet fabric

5.6 Mention the uses of swivel fabric.

6.0 Understand the laminated fabric

6.1 Define laminated and bonded fabric.

6.2 Describe the different methods of lamination.

6.3 Compare between laminated and bonded fabric.

6.4 Mention the uses of laminated fabric.

11 7.0 Understand the Terry weave.

7.1 Define terry weave.

7.2 Classify the terry weave.

7.3 Mention the characteristics of yarn used in terry weaving.

7.4 Mention the uses of terry fabric

8.0 Understand the defects of weaving/fabric

8.1 State the types of weaving defects

8.2 List the loom faults.

8.3 Describe the loom faults and their causes and remedies.

8.4 List the fabric faults.

8.5 Briefly describe the fabric faults their causes and remedies.

9.0 Understand the loom efficiency

9.1 Discuss the factors of effective efficiency.

9.2 Calculate the efficiency of winding, warping, sizing, weaving

and knitting efficiency.

9.3 Evaluation of efficiency and production.

9.0 Understand the weaving wastage

9.1 State the term weaving wastage.

9.2 Mention the types of wastage.

9.3 Calculate the waste percentage in weaving and knitting.

9.4 Discuss the measures to be taken to minimize waste percentage.

11.0 Understand the weavers load

11.1 Define weavers load.

11.2 State the factors for the calculation of weavers load.

11.3 Mention the allocation of number of looms/weaver.

11.4 Calculate the weavers load.

12 12 Understand the costing

12.2 Define costing.

12.3 State the factors of costing.

12.4 Analysis of total cost of weaving and knitting.

12.5 Define and discuss break-even point of a factory.

Practical:

1. Identify the lace fabric.

2. Sketch and show the lace machine

3. Identify the braid fabric.

4. Draw the braid machine.

5. Identify net fabric.

6. Show the intersection knot and interlooping of net fabric.

7. Identify the lappet fabric.

8. Draw and identify pattern wheel, shifter bar and needle bar.

9. Identify the swivel fabric.

10. Identify the laminated fabric

11. Identify the terry fabric

12. Draw and identify the different yarn used in terry fabric.

13. Practice the loom operation, calculate the production and loom

efficiency.

14. Calculate the production cost of fabric.

13 2471 ADVANCED DYEING-II

T P C 2 2 3

AIMS To provide the student with an opportunity to acquire knowledge, skill and attitude in the area of wet processing with special emphasis on Textile dyeing. SHORT DESCRIPTION Application; After-treatment; Stripping process of disperse dyes; Aniline black dyes; Onium dyes; Mordent dyes, Mineral khaki dyes and Pigments; Blended fabric dyeing. DETAIL DESCRIPTION Theory :

1.0 Understand the disperse dyes. 1.1 Define disperse dyes. 1.2 State the properties of disperse dyes. 1.3 State the importance of disperse dyes. 1.4 List the Trade name of disperse dyes. 1.5 Mention the function of dispersing agents. 1.6 List the commercial name of dispersing agents.

2.0 Understand the carrier in disperse dyeing. 2.1 Define carrier 2.2 Explain the functions of carrier. 2.3 Explain the properties of carrier. 2.4 State the advantages of carrier used in disperse dyeing. 2.5 State the disadvantages of carrier used in disperse dyeing. 2.6 Mention the names of carrier and trade name of carrier. 2.7 Mention the amount of carrier in different shades. 3.0 Understand the Disperse dyes and its application. 3.1 State the method of preparation of dye liqueur. 3.2 Explain the typical methods of application of disperse dyes. 3.3 Describe the application of disperse dyes on polyester fibres with carrier dyeing process. 3.4 Describe the application of disperse dyes on polyester fibrecs with high temperature dyeing method .

14

3.5 Describe the application of disperse dyes on polyester fibres with thermo-sole or thermo- fixation process.

3.5 Explain the after-treatment or wash -off process of disperse dyeing.

4.0 Understand the Aniline black dyes. 4.1 Define aniline black dyes. 4.2 State the general properties of aniline black dyes. 4.3 Classify the aniline black dyes. 4.4 Explain how the aniline black formation on the fibres. 4.5 Mention the composition of impregnation bath. 4.6 Mention the general bath composition of dye liqueur (gm/l) 4.7 Describe the application of different classes of aniline black dyes of cotton. 4.8 State the faults of aniline black dyeing. 4.9 Explain the causes of faults and remedies in aniline black dyeing process. 4.10 Mention the uses of aniline black dyes.

5.0 Understand the Onium dyes and its application . 5.1 Define onium dyes. 5.2 State the properties of onium dyes. 5.3 Mention the commercial name of onium dyes. 5.4 Classify the dyeing method of onium dyes. 5.5 Describe the application of onium dyes on cotton fibres. 5.6 Describe the stripping process of onium dyes. 6.0 Understand the Mordant dyes and its application . 6.1 Define mordant dyes. 6.2 Mention the general properties of mordant dyes. 6.3 Classify the mordant dyes. 6.4 Mention the trade name of mordant dyes. 6.5 Describe the application of acid mordant dyes on woolen goods.

7.0 Understand the Mineral Khaki dyes and its application. 7.1 Define mineral khaki dyes. 7.2 Mention the properties of mineral khaki dyes. 7.3 Describe the application of mineral khaki dyes on cotton.

15 8.0 Understated the pigments. 8.1 Define pigments. 8.2 Classify the pigments. 8.3 State the properties of pigments. 8.4 Distinguish between inorganic and organic pigments. 8.5 Mention the uses of pigments in different fields. 8.6 List the trade name of pigments. 9.0 Understand the pigments and its application.

9.1 Describe the application of pigments on cotton and other cellulasic fibres

9.2 Describe the application of pigments on nylon-6/66 or synthetic fibres. . 9.3 Explain the function of binder, fixer migration inhavitor and catalyst

used in pigments. 9.4 State the properties of binder. 9.5 Distinguish between dyes and pigments.

10.0 Understand the blended fabric dyeing. 10.1 Mention the factors depends on blended fabric dyeing. 10.2 Explain the dyeing effect (Solid dyeing reserve dyeing, cross dyeing, tone-on-effect etc) 10.3 Describe the dyeing process of polyester - cotton blended fabric. 10.4 Describe the dyeing process of polyester- wool blended fabric. Practical.1. Application of disperse dyes on polyester fibres with carrier dyeing process. 2. Application of disperse dyes on polyester fibres with high temperature dyeing process. 3. Application of aniline black dyes on Cotton 4. Application of acid mordant dyes on woolen goods. 5. Application of pigments on cotton/other cellulose. 6. Application of pigments on polyester fibres. 7. Application of pigments on Nylon/ acrylic fibres. 8. Application of mineral khaki dyes on cotton fibres. 9. Application of onium dyes on cotton fibres. 10. Dyeing process of polyester cotton bended fabric. 11. Dyeing process of polyester wool blended fabric.

2571 WOVEN GARMENTS AND FINISHING-II

16

T P C 2 2 3

AIMS 1. To develop the knowledge of woven garments dyeing. 2. To develop the knowledge of woven garments finishing. 3. To develop the basic knowledge of woven garments quality control. 4. To make understand the basic knowledge of garments export.

SHORT DESCRIPTION

Woven garments dyeing; Dryer; water proofing; Fire proofing; Folding; Packing; Package Marking;. DETAIL DESCRIPTION Theory :

1.0 Understand the Garment dyeing. 1.1 Define garment dyeing. 1.2 State the necessities of garment dyeing. 1.3 Classify garment dyes. 1.4 Describe the procedure of dyeing for cotton garments. 1.5 Describe the procedure of dyeing for blended (Cotton –Polyester) garment.

1.6 Name the faults in garments dyeing and discuss the means for their remedies.

2.0 Understand the drying machine. 2.1 Classify the drying machines. 2.2 State the purposes of drying machine. 2.3 Illustrate the Processes of drying machine. 2.4 Mention the capacity of drying machines. 2.5 Discuss the controlling of temperature of drying machine. 2.6 Mention the uses of drying machine.

17 3.0 Understand the steam. 3.1 Define steam. 3.2 Classify the steam. 3.3 Mention the uses of steam 3.4 State the importance of steam. 3.5 List the different steam grades. 3.6 Describe the different steaming process for batch method.

4.0 Understand the water proofing. 4.1 Define water proofing. 4.2 State the purpose of water proofing. 4.3 State the types of water proofing. 4.4 Give a typical recipe for water proofing. 4.5 Describe the process of water proofing. 4.6 Mention the uses of water proofing fabric.

5.0 Understand the Fire proofing. 5.1 Define fire proofing. 5.2 State the Importance of fire proofing. 5.3 Give a typical recipe for fire proofing. 5.4 Describe the process of fire proofing. 5.5 Mention the materials/ chemical used in fire proofing. 5.6 Name the uses of fire proofing fabric. 5.7 Mention the properties of fire proofing agent.

6.0 Understand the Folding. 6.1 Define folding 6.2 State the necessities of folding 6.3 Classify folding. 6.4 Describe each type of folding. 6.5 Describe the faults in folding. 6.6 List the precaution during folding. 6.7 State the factors of quality of folding. 7.0 Understand the Faults of Finished Garments. 7.1 State the faults of garments. 7.2 Classify the faults. 7.3 Discuss the garments grading according to the faults.

18 7.4 Discuss the acceptance faults of garments. 7.5 Describe the remedies of garments faults.

8.0 Understand the Packing. 8.1 Define Packing. 8.2 State the necessity of Packing.

8.3 Discuss the style of Packing. 8.4 Discuss the procedure of packing. 8.5 State the packing material and the auxiliaries. 8.6 State the faults of Packing. 8.7 Discuss the precaution of packing. 9.0 Understand the Package Marking. 9.1 Define Package Marking. 9.2 State the importance of package marking. 9.3 Describe the procedure of package marking. 9.4 State the marking faults and their remedies. 9.5 State the materials of package marking.

10.0 Understand the Handling of Finished Garments. 10.1 Define Garments handling. 10.2 State the necessity and importance of garments handling. 10.3 Mention the different material of handling. 10.4 Describe the processes of handling.

Practical.

1. Prepare a recipe of garments dyeing for the specific garments. 2. Prepare a recipe of dyeing and apply to the blended (Cotton- polyester)

Garment. 3. Operate the drying machine for woven garments. 4. Apply water proof finishing for woven garments. 5. Apply fire proof finishing for woven garments. 6. Practice the folding and packing of woven garments.

19 2272 ADVANCED LONG STAPLE SPINNING T P C

2 2 3 AIMS : 1. To familiarize the students with the evolution of long staple spinning. 2. To understand the basic concepts and principles of long staple spinning. 3. To understand the operational techniques of long staple spinning machines. 4. To know the advancement of long staple spinning machines

and diversification of the products. SHORT DESCRIPTION To understand the basic concepts of long staple spinning; Technological developments of jute spinning machines; Utilization of jute mill waste; Jute as floor covering–backing material-carpets; Research and development of jute; Geo-textiles and geo-jute; Wool–acrylic and linen/flax Spinning; Silk spinning. DETAIL DESCRIPTION Theory : 1.0 Understand the basic concept of long staple spinning.

1.1 State the term ‛‛long staple spinning”. 1.2 Name different long staple spinning process.

2.0 Understand the Technological developments of jute spinning machines.

2.1 List the Technological development of jute spinning machines (from batching to spinning.)

2.2 Describe the Technological development of jute spinning machines (from batching to sliver spinning)

3.0 Understand the utilization of jute mills waste. 3.1 List the position and give the percentage of waste in jute mills .

3.2 Mentions the factors influencing the quantities of waste. 3.3 List the name of different types of waste. 3.4 Describe waste processing and recovery systems of jute mills. 3.5 Describe waste processing machine.

3.6 Describe wastes re-used process of jute mills.

20 4.0 Understand the research and development of jute. 4.1 State the importance of jute research and diversification of jute. 4.2 Mention the areas of research and development. 4.3 State the problems of jute industries. 4.4 Discuss about the alternative uses of jute. 4.5 Describe blended jute yarn production. 5.0 Understand geo-textiles 5.1 Define geo-textiles and geo-jute. 5.2 Give the types of geo-textile 5.3 Mention the uses of geo-jute 5.4 Describe the salient features of geo-jute. 6.0 Understand wool, acrylic and linen/flax spinning. 6.1 Show the methods (flow-chart) of wool, acrylic yarn production. 6.2 List the classification of wool.

6.3 Describe wool, acrylic and flax spinning process. 6.4 Give the end-uses of woolen, worsted, flax and acrylic fabrics.

7.0 Understand silk spinning.

7.1 Describe the history of silk. 7.2 Discuss the methods of silk worm production. 7.3 Describe silk spinning process. 7.4 State the future of silk in Bangladesh.

Practical 1. Draw the draftomatic system of jute drawing frame and show its techniques. 2. Draw the can-turning and trumping motion and show it . 3. Draw the techniques of pneumatic spinning and calculate the production. 4. Perform the processes of converting a spinning frame in to a twisting frame. 5. Perform winding process in spool winding machine and explain. 6. Mention the card setting for wool processing. 7. Perform the blending process of wool and acrylic in draw-frame. 8. Prepare wool yarn from wool sliver. 9. Show the waste silk spinning process. 10. Show the reeling process of silk spinning.

21 Book references: 1. Jute and its diversification- ABM Abul Kashem 2. Wool in Indian textiles- NICTAS 3. Wool spinning Vol. I & vol- II – Ya Lipenkov 4. Waste silk spinning-Rayner 5. An Introduction to sericulture- G. ganga & J Sulochana chetly. 6. Sericulture mannual-3 Silk reeling Dr. S. Krishnaswami (FAO) 7. Illustrated text book or sericulture- FAO 8. Flax, Tow and jute spinning – Hurst

22 2372 ADVANCED KNITTING AND NON-WOVEN T P C

2 3 3 AIMS 1. To develop advance knowledge of knitting fundamentals. 2. To enable to understand the concepts of knitting machinery. 3. To make understand the knowledge of Knit fabric construction . 4. To develop the knowledge of quality control of knit fabrics. 5. To develop the knowledge of non-woven fabric . SHORT DESCRIPTION Knitting fundamentals developed warp & weft knitting fabric; multi-axial fabrics; Non-woven fabrics ; Bonding material; Fibrous raw material & production of non-woven fabrics. 1.0 Understand the knitting fundamentals.

1.1 Define the term knitting process. 1.2 Mention the classification of knitting process.

1.3 Describe the different structural fabrics with diagram. loop, stitch, plain stitch, purl stitch, needle loop, sinker loop, tuck loop ,

float stitch, warp knitted laps, tuck, miss stitch, over lap, under lap, closed lap, open lap.

1.4 Describe the arrangement of structural elements i.e. Plain knitted fabrics, double knitted fabrics, double knitted rib fabrics, double knitted interlock fabrics, double knitted purl fabrics.

2.0 Understand the high quality weft knitting production.

2.1 Describe the high quality cotton knit goods production. 2.2 Describe the production of knit goods from yarn containing man made fibre. 2.3 State the uses of linear and non linear cams in weft knitting. 2.4 Discuss the automation of weft knitting industry. 2.5 Calculate the production of weft knitting.

3.0 Understand the single jersey jacquard.

3.1 State the term of weft knitting jacquard. 3.2 Describe the coloured stitch design in weft knitting.

4.0 Understand the multi-axial knitted fabric construction.

4.1 Define the term of multi-axial knitted fabric.

23

4.2 Describe the multiaxial raschel knitting machine 4.3 Mention the uses of multi-axial fabrics.

5.0 Understand the development of warp knitting machine.

5.1 Define the term ‛‛multiple guide warp knitting machine”. 5.2 Mention the product of multiple guide warp knitting machine 5.3 Describe the multiple guide warp knitting machine. 5.4 Describe the warp knitted fabric faults with their remedies.

6.0 Understand the Non-woven. 6.1 Define the term ‛‛non-woven fabrics”. 6.2 State the history of non –woven fabrics.

6.3 Discuss the characteristic and properties of non woven fabrics. 6.4 Distinguish between woven & non-woven fabrics.

6.5 Describe the binding & bonding techniques of non -woven fabrics. 6.6 Discuss the arrangement of the fibre in the non- woven fabrics. 6.7 List the binding elements of non-woven fabrics. 6.8 Mention the classification of non-woven fabrics 6.9 State the characteristics of laminated fabrics . 7.0 Understand the adhesives and bonding. 7.1 Define adhesive and bonding. 7.2 State the functions of bonding process. 7.3 Discuss the testing adhesion stickiness’.

7.1 Mention the problems of adhesives. 7.2 Describe the adhesive substances of non-woven fabrics.

8.0 Understand the fibrous raw materials. 8.1 State the term fibrous raw material. 8.2 State the function of the fibres in non woven fabrics. 8.3 Describe the properties of fibrous for matrices. 8.4 Discuss the requirements of the fibres for non woven fabrics . 9.0 Understand the Production of non woven fabrics. 9.1 Show the flow chart of producing non woven fabric. 9.2 Discuss the flow process of non- woven fabric production.

24 9.3 Discuss the principles of production of mechanically bonded non woven fabric.

9.4 Discuss the principles of production stitch bonding without binding thread with binding thread.

9.5 Mention the uses of non woven fabrics . Practical 1. Show with diagram the inter looping of different knit fabrics. 2. Draw and identify the different loop i.e. Face and reverse meshed loop, closed lap ,

open lap, under lap ,overlap, knitted stitch etc, 3. Draw and identify the cross - section of knitting head of a single jersey machine with

diagram. 4. Show the knitting cycle of a single jersey latch needle machine. 5. Sketch and show the sinker timing on a single jersey machine. 6. Show the tuck stitch produced on latch need machine. 7. show the stitches of single jersey jacquard in a knit fabric. 8. Show the stitches of double jersey structure and the notation of different knit fabrics. 9. Show the diagram of rib loop transfer on a modern V-bed machine. 10. Draw and identify the mechanical jacquard selection on a V-bed flat knitting machine. 11. Show the diagram of knitting element and cross- section of a bearded needle tricot

machine. 12. Show the diagram of cross- section of latch needle rachel machine 13. Show the diagram of mechanical banded non- woven fabrics with production. 14. Show the diagram and production of stitch bonding non -woven fabrics . 15. Show the diagram and production of non woven fabrics without stitch bonding . Ref : Book:- Manual of non woven by –prof . Dipl, Ing. Dr . Radko Krcnea . Manchester Eagland

25 2472 ADVANCED PRINTING AND FINISHING

T P C 2 2 3

AIMS To provide the student with an opportunity to acquire knowledge, skill and attitude in the area of wet processing with special emphasis on printing and finishing. SHORT DESCRIPTION Basic Concept of preparation of selected thickening agent. Preparation of screen; screen printing; Engrave roller printing; Transfer printing; Batik printing and Tie-dyeing; Drying; Steaming and Ageing; Curing/baking (Thermo fixation); Fabric printing, Blended fabric Printing, Raising finishing; Starch finishing; Moth proof finishing, Mildew proof finishing, Fire/ Flame proof finishing. DETAIL DESCRIPTION Theory :

1.0 Understand the Preparation of selected thickening agents. 1.1 State the preparation of Sodium alginate thickener. 1.3 State the preparation of British gum-D and British gum on-5 1.4 State the preparation of locust bean gum. 1.5 State the Preparation of gum tragacanth. 1.6 State the preparation of gum Senegal or gum Arabic 1.7 State the preparation of gum Indulca-U 1.8 State the preparation of Nafka crystal gum. 1.9 State the preparation of Solvitose-C5 1.10 Describe the function of ingredients used in printing paste.

2.0 Understand the Preparation of Screen. 2.1 Mention the methods of screen preparation. 2.2 List the common fabrics and metal gauge used in screen preparation. 2.3 State the preparation of Screen frame. 2.4 Mention the stretching and fixing of silk gauze on screen frame. 2.5 State the sensitizing of the screen. 2.6 Describe the preparation of positive design. 2.7 State transfer of positive design. 2.8 Describe the hardening of the exposed design. 2.9 Describe the re-inforcement of the screen.

26 2.10 Describe the preparation of printing table. 3.0 Understand the Screen Printing. 3.1 State the classification of the screen-printing. 3.2 Mention the classification of the scrapper or squeegee. 3.3 Describe the Rotary Screen-Printing machine with working principle. 3.4 Describe the Automatic Flat Bed Screen-printing m/c with working principle. 3.5 Compare the Flat Bed Screen printing with Rotary Screen-printing .

4.0 Understand the Engrave Roller Printing. 4.1 List the advantages and disadvantages of Roller Printing machine. 4.2 Describe the methods of roller engraving. 4.3 State the causes and remedies of the defects of Roller printing. . 4.4 Compare the Copper Roller printing with Rotary Screen printing.

5.0 Understand the Transfer printing. 5.1 List the common fabrics can be printed with Transfer printing. 5.2 Mention the classifications of Transfer printing machine. 5.3 Describe the Transfer printing machine with printing procedure. 5.4 State the advantages and disadvantages of Transfer-printing machine. 6.0 Understand the Batik printing and Tie-dyeing. 6.1 List the ingredients and instruments used in Batik printing. 6.2 Mention the common dyes used in Batik printing. 6.3 Describe the Batik printing process. 6.4 Define Tie- dyeing. 6.5 Describe the Tie- dyeing process.

7.0 Understand the drying of printed goods. 7.1 State the importance of drying of printed goods. 7.2 Mention the types of drying. 7.3 State the conditions of drying. 7.4 Describe different drying processes. 8.0 Understand Steaming and Ageing. 8.1 State the functions of steam. 8.2 Illustrate the distinctions between steaming and ageing.

27 8.3 Mention the classifications of steam. 8.4 List the name of steamer used for after-treatment of printed goods. 8.5 Describe the Spiral (krostewitz) steamer. 8.6 Describe the Cottage steamer. 9.0 Understand the Curing/Baking (Thermo-fixation) 9.1 State the importance of Curing/Baking in printing. 9.2 Mention the distinctions between Steaming and Curing. 9.3 Describe the Curing/Baking process for after-treatment of printed goods.

10.0 Understand the fabric printing. 10.1 Describe the printing of viscose rayon fabric with reactive dyes. 10.2 Describe the printing of viscose rayon fabric with vat dyes. 10.3 Describe the printing of linen fabric with reactive dyes. 10.4 Describe the printing of linen fabric with vat dyes. 10.5 Describe the printing of acrylic fabric with basic dyes. 11.0 Understand the blended fabric printing. 11.1 Describe the printing of polyester- cellulose blended fabric with vat dyes . 11.2 Describe the printing of polyester cellulose blended fabric with Reactive

and disperse dyes. 12.0 Understand the fabric printing with pigment colours. 11.1 Describe the printing of cellulose fabric with pigments. 11.2 Describe the printing of synthetic fabrics with pigments. 13.0 Understand the raising finishing. 13.1 Define raising finishing. 13.2 State the object of raising finishing. 13.3 Mention the conditions of raising finishing. 13.4 Mention the classification of the raising machine. 13.5 Describe the raising processes.

28 14.0 Understand the starch finishing. 14.1 Mention the classifications of starch. 14.2 Mention the properties of starch. 14.3 State purpose of starch finishing. 14.5 Mention the moisture regain of starch materials. 14.6 Describe the preparation of starch solution for application. 14.7 Describe the application of starch on textile materials. 14.8 Describe the effects of different starches on textile materials. 14.9 Mention some standard recipe for fabric finishing. 15.0 Understand the softening finishing. 15.1 Mention the importance of softening finishing. 15.2 List the commercial name of softeners. 15.3 Describe the application of softener of cellulose fibre. 15.4 Describe the application of softener of protein fibre. 15.5 Describe the application of softener to synthetic fibre 16.0 Understand the water proof finishing. 16.1 Define water proof and water repellent finishing. 16.2 Mention the distinction between completely water proof and water repellent fabric. 16.3 List the names of water repellent fabrics. 16.4 List the commercial names of water repellent finishing agents and water proof finishing agents. 16.5 Describe the application of water repellent finishing agents on cellulosic, acrylic, wool fabric and their blends. 17.0 Understand the moth proof finishing. 17.1 State the importance of moth proof finishing. 17.2 Mention the classifications of moths. 17.3 List the names of moth proof finishing agents. 17.4 Describe the moth proof finishing process to textile materials. 18.0 Understand the mildew proof finishing. 18.1 State the importance of mildew proof finishing. 18.2 List the name of mildew proof finishing agents. 18.3 Describe the application of mildew proof finishing to textile materials.

29 Practical.

1. Practice on preparation of screens.

2. Practice of Flat bed screen printing machine.

3. Practice on Rotary screen printing machine.

4. Practice on Roller engraving.

5. Practice on engrave Roller printing machine.

6. Practice on Transfer printing machine.

7. Practice on Batik printing.

8. Print viscose rayon fabric with reactive dyes.

9. Print viscose rayon fabric with vat dyes.

10. Print linen fabric with reactive dyes.

11. Print linen fabric with vat dyes.

12. Print acrylic fabric with basic dyes.

13. Print polyester- cellulose bended fabric with vat and disperse dyes.

14. Print polyester cellulose blended fabric with reactive and disperse dyes.

15. Print cellulose fabric with pigments.

16. Print synthetic fabric with pigments.

17. Practice on raising machine.

18. Apply starch on textile materials.

19. Apply softening agents on textile materials.

20. Apply water proofing, moth proofing agents on textile materials.

21. Apply water repellent finishing agent on textile materials.

Fef : Books

1. An introduction to textile printing by W. clark.

2. Textile printing by L. W. C. Miles.

3. An Introduction to Textile finishing by. J. T. MARSH.

4. ‡U·UvBj †Kwgwóª -3q LÛ (wcÖw›U, GÛ wdwbwms)

by Avey wgbv †gvt †ivKbyj Kv‡`i|

5. ‡U·UvBj †Kwgwóª-3 by †gvt gwReyi ingvb

6. Hand book of textile auxitiaries –CIBA.

30 2572 ADVANCED KNIT GARMENTS AND FINISHING T P C

2 3 3

AIMS

1. To understand the fundamentals of knit garments.

2. To develop the knowledge of knit garments production.

3. To become familiar with knit garment washing.

4. To acquire knowledge of knit garments dyeing, printing & finishing.

SHORT DESCRIPTION

Basic concepts of knitted fabrics; Machinery used in knit garments; Knit garments

quality control; Chemical wash; Stone wash; Bleach wash; Dyeing , Printing &

Finishing of knit garments.

DETAIL DESCRIPTION

Theory

1.0 Understand the knit fabrics

1.1 Describe the characteristics of yarn for producing knit fabrics.

1.2 Explain the characteristic properties of knit fabrics.

1.3 Mention the steps of knit fabric production.

1.4 Mention the steps of knit garments production.

1.5 State the different categories of knit garments according to general

production methods.

1.6 Describe the production sequence of fully cut garments, stitch shaped

cut, fully fashioned & integral.

2.0 Understand the machinery for seaming knit garments.

2.1 Discuss the constructional features of sewing process.

2.2 State the four bed type variations in use in the knit garments industries.

2.3 Describe the general view of dial linking machine.

2.4 Discuss the stitch forming action of a conventional needle linking

machine.

31 3.0 Understand the normal wash of knit garments.

3.1 State the term o “ knit garment”.

3.2 Discuss the importance of garment washing.

3.3 Describe the normal washing process of knit garments.

3.4 Describe the necessity of chemical wash.

3.5 List the different chemicals of knit garment wash.

4.0 Understand the stone wash of knit garments

4.1 State the term “ stone wash”.

4.2 Discuss the shape and size of stone for the washing of knit garments.

4.3 Mention the recipe of stone wash and their typical m: l ratio.

4.4 Describe the stone washing process for knit garments.

4.5 Explain the appearance of knit garments after stone wash.

5.0 Understand the bleach wash of knit garments.

5.1 Define bleach wash.

5.2 Mention the recipe of bleach wash.

5.3 Describe the process of bleach wash.

5.4 Mention the recipe of bleach wash and their m: l ratio.

6.0 Understand the knit garments dyeing

6.1 State the term ‛‛garments dyeing”.

6.2 Describe the purpose of knit garments dyeing.

6.3 List the important dyes used in knit garments dyeing.

6.4 Describe the application of dyeing for different knit garments

6.5 Describe the application of double bath dyeing for blended ( wool-

acrylic) garments

7.0 Understand the knit garments printing.

7.1 State the term ‛‛garments printing”.

7.2 Describe the necessity of garments printing.

32

7.3 Mention the recipe of knit garments printing and their typical m: l ratio.

7.4 Describe the process of knit garments printing.

8.0 Understand the knit garments finishing.

8.1 State the term knit ‛‛garments finishing”.

8.2 State the purpose of knit garments finishing.

8.3 Describe the pressing , folding and packing of knit garments finishing.

9.0 Understand the quality control of knit garments

9.1 State the term knit fabric quality.

9.2 Calculate the weight per unit area and tightness factor of knit fabric.

9.3 Describe the different faults of knit garments and with their causes and

remedies.

9.4 Describe the steps of quality control during manufacturing of knit

garments

- Yarn assessment

- Fabric assessment

- Spreading

- Cutting

- Sewing

- Finishing

- Final inspection

Practical :

1. Draw and identify the sewing equipments of knit garments industry.

2. Draw and identify the sewing thread of knit garments industry

3. Draw and identify the pressing equipment of knit garment industry.

4. Draw and identify the different pattern for different knit garments.

5. Show the different cut to produce knit garments

6. Draw and show the comparism between knitted pattern cut and woven

cuts.

7. Construct and identify the sewing machine.

33

8. Prepare a stitch forming action of the principle elements of 3-thread over

lock machine.

9. Prepare a knitted fabric before cutting.

10. Draw the pattern for different categories.

11. Prepare a recipe of stone wash for knit garments

12. Prepare a recipe of normal chemical wash for knit garments.

13. Prepare a recipe of bleach wash for knit garments.

14. Show the application of knit garments dyeing.

15. Show the application of knit garments printing.

16. Show the application of knit garments finishing.

Ref: Books.

1. Knitted clothing technology ---- . by Terry Brackenbury.

2. Dress making simplified ----- by Bvlerie I. Cock.

34 2273 MAN-MADE FIBRE PRODUCTION T P C

2 3 3 AIMS 1. To develop basic knowledge of man made fibre structures. 2. To develop basic knowledge of man made fibre properties. 3. To provide the student with the basic knowledge of

regenerated fibre. 3. To familiarized the students about formation of synthetic fibre. 4. To acquaint with the knowledge of texturising and multi- component fibre. SHORT DESCRIPTION Basic concept of man made fibre production ; Monomer and polymer properties ; Production of acetate, Viscose rayon ;Polyamide; Polyester, Polypropylene; Acrylic and P.V.A fibre. DETAIL DESCRIPTION. Theory : 1.0 Understand man made fibre

1.1 Define man made fibre. 1.2 Briefly discuss the history of introducing man-made fibre. 1.3 Mention the classification of man- made fibre .

2. Understand the principles of different spinning method.

2.1 Explain the principles of different spinning method. 2.2 Discuss different types of spinning system (viz. wet spinning, dry spinning,

melt spinning, bi-component spinning and bi-constituent spinning ect.) 3.0 Understand the Polymerization of man made fibre.

3.1 Define the term ‛‛Polymerization”. 3.2 State the types of polymerization. 3.3 Explain the degree of polymerization. 3.4 Define the term ‛‛Repeated Unit”.

4.0 Understand the monomer & polymer of fibre.

4.1 Define monomer & polymer.

35

4.2 State the crystallization, drawing and stretching of man-made fibre. 4.3 Mention the properties of crystalline and amorphous polymers 4.4 Explain the requirement of fibre forming polymers.

5.0 Understand the texturising 5.1 Define texturising. 5.2 Discuss the steps of texturising process. 5.3 Explain P.O.Y (Pre-Oriented yarn) & D.T.Y.( Drawn textured yarn) 5.4 Mention the properties and uses of textured yarn. 6.0 Understand the viscose rayon.

6.1 State the term ‛‛rayon”. 6.2 Describe the history of rayon. 6.3 State the flow sheet of producing viscose rayon. 6.4 Describe the manufacturing process of viscose rayon. 6.5 Discuss the properties of viscose rayon. 6.6 Mention the uses of viscose rayon.

7.0 Understand the acetate fibre.

7.1 State the term ‛‛acetate fibre”. 7.2 Mention the classification of acetate fibres. 7.3 State the polymers of primary & secondary acetate fibre. 7.4 Describe the history of cellulose acetate. 7.5 State the flow chart of the manufacturing process of acetate fibre. 7.6 Describe the manufacturing process of acetate & tri acetate. 7.7 Explain the properties of acetate & triacetate fibre. 7.8 Mention the uses of acetate & triacetate fibres.

8.0 Understand the polyamide fibre.

8.1 List the type of polyamide fibres. 8.2 State the chemical structures of Nylon 6 & Nylon 6.6 8.3 Discuss the polymerization & manufacturing process of Nylon 6 & Nylon-6.6. 8.4 Illustrate the properties of Nylon-6 & Nylon-6.6. 8.5 Mention the uses of Nylon.

36 9.0 Understand the Polyester fibre. 9.1 State the term ester & Polyester. 9.2 Discuss the polymerization of polyester. 9.3 Describe the manufacturing process of polyester. 9.4 Discuss the properties of polyester.

9.5 Mention the uses of polyester. 10.0 Understand the acrylic and modacrylic fibre. 10.1 State the term polyacrylonitrile. 10.2 Discuss the production of polyacrylonitrile. 10.3 Describe the manufacturing process of acrylic fibre. 10.4 Mention the properties & uses of acrylic fibre.

10.5 State the term mod acrylic. 10.6 Describe the manufacturing process of mod acrylic fibre. 10.7 Mention the properties & uses of mod acrylic fibre. Practical 1. Identify the man-made fibre from the cross sectional & longitudinal view with help

of microscope. 2. Draw the cross -sectional and longitudinal view of different man made fibres. 3. Identify the man made fibres by burning test. 4. Identify the man made fibres by chemical test. 5. Test the properties (moisture regain and strength)of different fibres. a) Viscose. b) Acetate. c) Nylon. d) Polyester.

e) Acrylic. 6. Find out the percentage composition of different blends 7. Identify the different fibres by staining. Ref : Books :- 1. Man made fibre. by R.w Moncrief. 2. Man made fibre.F knit garments H.F. Mark / S.M Hlas & E. Cernia . 3 Textile Fibre by Mohibul Islam.

37

T P C 2 3 3

2373/2473 TEXTILE DESIGN AND COLOUR AIMS : 1. To familiarize the students with the drawing instrument and their uses. 2. To develop the skill of the student in making designs . 3. To give the students a clear concept about light and colour. 4. To familiarize with colour and weave effects. SHORT DESCRIPTION Basic concept of drawing instruments and their uses; Designing; Motif and repeat of a design; Construction of design from incomplete repeats; Light and colour phenomena; Theory of colour; Colour harmony and contrast of colour; Colour and weave effect; Check-stripe and shaded design. DETAIL DESCRIPTION Theory : 1.0 Understand drawing instruments and their uses.

1.1 List the instruments used for drawing. 1.2 Describe different instruments used for drawing. 1.3 Discuss about tracing paper with its use. 1.4 State the causes of dirty drawing papers 1.5 Explain the general rules to be obeyed during drawing. 1.6 Describe the effect of light and shade in a drawing.

2.0 Understand the basic concept of design:

2.1 State the importance of design. 2.2 Mention the classification of designs with their definition and differences. 2.3 Discuss the principles of selecting a design for particular end product. 2.4 Discuss about different colour viz water colour, oil colour and pastal colour.

3.0 Understand motif and repeat of a design.

3.1 Define motif and repeat of a design with their differences. 3.2 Describe the uses of motif and design. 3.3 Discuss the techniques of enlarging or reducing a design. 3.4 Describe the process of drafting a design from plain paper to graph paper

according to fabric construction.

38 4.0 Understand the construction of design from incomplete repeats.

4.1 Give the quality of a designer to complete a design from an incomplete design. 4.2 List the causes of incomplete design. 4.3 Describe a design can be completed from an incomplete design. 4.4 Describe the methods of reproducing a design from a woven or printed fabric.

5.0 Understand the light and colour phenomena. 5.1 Describe the dependence of lusture and colour of fabric on light. 5.2 State the physical basis of colour and colour of matters. 5.3 Describe about colour vision. 5.4 Discuss about absorption and emission of light. 6.0 Understand theory of colour. 6.1 State the theory of colour. 6.2 Mention the classification of the theory of colour with their description

and differences. 6.3 Describe the Brewster circle and explain pigment theory of colour

from Brewster theory.

7.0 Understand colour. 7.1 Mention the classification of colour with their definition and uses. 7.2 Describe complementary colour and explain it with young-Helmholtz theory. 7.3 Define chromatic circle and state the technique of drawing chromatic circle. 7.4 List the uses of chromatic circle. 7.5 Describe the attributes of primary and secondary colour. 7.6 Define pure colour, broken colour, shade, tint, tone, hue, cold colour, hot

colour, opaque colour, transparent colour.

8.0 Understand harmony and contrast of colour. 8.1 Define, classify and describe the harmony and contrast of colour. 8.2 Discuss about modifications of colour. 8.3 Define and discuss coloured grey.

8.4 Describe the practical applications of modified colour. 8.5 State the factors, modifying the colouring of textile fabrics.

9.0 Understand colour and weave effect . 9.1 Define colour and weave effects. 9.2 Mention the classifications of colour and weave effects. 9.3 Explain the methods of producing colour and weave effect with the

techniques of representing the design and colour on graph paper.

39 10.0 Understand Check, Stripe and Shaded design. 10.1 Define stripe and check design with their differences. 10.2 Describe the defects of colour and weave effects. 10.3 Discuss the factors to be considered for the selection of weave for stripe and

check designs. 10.4 Describe check and stripe design. 10.5 Describe shaded design with example. 11.0 Understand dark -room activities for screen preparation.

11.1 Mention the importance of a dark room for screen preparation. 11.2 Explain the role of a camera for screen preparation. 11.3 Describe the process of making a screen.

Practical: 1. Draw at least 5 designs with water colour, oil colour and pastal colour. 2. Draw at least 5 designs showing shaded effect. 3. Draw at least 5 designs for shirt. 4. Draw at least 5 designs for selvedge of a Sari. 5. Draw at least 5 designs for body of a Sari. 6. Draw at least 10 geometrical designs mention the purpose. 7. Enlarge a given design to the required size. 8. Construct a plain paper design from a given printed sample. 9. Construct a graph paper design from a given fabric sample. 10. Draw Brewster circle and explain the pigment theory of colour. 11. Draw chromatic circle and prove young-Helmholtz theory. 12. Draw some designs from given motif. 13. Prepare screen from given design for screen printing. Book references. 1. Watsons Textile design & colour- Nisbet 2. Designers guide to colour- D.Patterson Allen. 3. WªBs wWRvBb A¨vÛ Kvjvi- cÖ‡KŠkjx Av.K.g dwi`yj AvRv`

4. Pvi“ I Kvi“Kjv - lô †kªYx RvZxq wk¶vµg I cvV¨cy —K †evW©|

5. cÖv_wgK BwÄwbqvwis WªBs - ‡ngš— Kzgvi fUªvPvh©¨|

6. Textile weaving and design-W. S. Murphy.

40 2573 FASHION AND DESIGN

T P C 2 3 3

AIMS 1. To develop basic knowledge regarding fashion. 2. To develop knowledge of design. 3. To familiarize with fashion accessories. 4. To acquire knowledge in fashion drawing. 5. To develop skill, knowledge and market promotion of apparels. SHORT DESCRIPTION : Basic concept of fashion style and accessories; Product and design development; Fashion mercendising and market promotion; Fashion drawing from life; Fabric representation ; Fashion illustration. Theory : 1.0 Understand the style and fashion.

1.1 Define the term style and fashion. 1.2 State the importance of style and fashion in human life. 1.3 Mention the classification of fashion. 1.4 State the importance of hair style to fashion. 1.5 State the importance of make-up to fashion. 1.6 State the importance of costume to fashion. 1.7 State the importance of body fitness to fashion. 1.8 State the importance of contact lance to fashion. 1.9 State the importance of jewelry to fashion. 1.10 State the importance of footwear to fashion.

2.0 Understand the Trimmings, Leather and Fur .

2.1 Explain how threads, elastic, interfacings, narrow fabrics, zippers, buttons and belts are produced and used.

2.2 Mention the sources of fur and leather and the steps in processing them. 3.0 Understand the international fashion centers.

3.1 Name the well known international fashion creators. 3.2 Explain the reasons for French fashion leadership. 3.3 Discuss the growth and importance of the pret-a-porter. 3.4 List the reasons for the importance of New York as a fashion centers. 3.5 Discuss the role of international and domestic fashion centers.

41 4.0 Understand the product and design development.

4.1 Describe line development by item or by group. 4.2 Explain the important elements and principles of design and their application

to development. 4.3 Describe the process of creation a sample garment.

5.0 Understand the fashion accessory and fur manufacturing. 5.1 Discuss the unique design considerations of various accessories. 5.2 List the fashion accessories. 5.3 Describe production methods for the major accessories. 5.4 Explain accessory design and production centers. 5.5 Discuss the marketing aspects for accessories. 5.6 Explain fur garment production.

6.0 Understand the wholesale markets, sales promotion and distribution.

6.1 List the major international markets of apparel. 6.2 Discuss collection openings, line releases and market weeks. 6.3 Describe distribution polices. 6.4 Discuss various aids to selling. 6.5 Mention the forms of sales promotion. 6.6 Explain the use of EDI in distribution.

7.0 Understand the retail stores.

7.1 Explain Today`s retail situation and trends. 7.2 Discuss the various types of retail store. 7.3 Explain the organizational differences between single-unit and multiple-unit

stores. 7.4 Mention the major international stores and famous shopping areas. 7.5 Distinguish between the organizational structure of small store with that of a

large store. 7.6 Explain the growing importance of non-store retailing. 7.7 Explain store’s fashion image is conveyed to consumer groups and

manifested in store policies. 8.0 Understand the retail fashion mercendising.

8.1 Discuss the buying and selling aspects of mercendising. 8.2 Explain buying procedures at the market. 8.3 Describe all aspects of inventory control and evaluation. 8.4 Discuss the importance of customer service and sales associates.

42 9.0 Understand the retail fashion promotion.

9.1 Explain the purpose of sales promotion. 9.2 Explain the purpose goals and procedures of advertising, publicity, special

events, fashion show and visual mercendising. 9.3 Describe various types of media and their relation to store needs and target

customers. 9.4 Describe the buyer`s role is promotion.

10.0 Understand the drawing from life.

10.1 Mension proportion-natural, elongated figures (men`s and women`s). 10.2 Mension women’s, men’s and children’s poses. 10.3 Mension children’s, women’s and men’s heads. 10.4 Mension proportion-heads, hands and feet. 10.5 Mension women’s and men’s hands. 10.6 Mension children’s hands and feet 10.7 Mension women’s and men’s feet. 10.8 Mension womes`s men’s, children’s and babies boots and shoes.

11.0 Understand the fabric representation.

11.1 Describe depth and shine. 11.2 Describe faux fur and wool and lace. 11.3 Describe wool and faux fur. 11.4 Describe folds and fringing. 11.5 Describe highlights and pleats. 11.6 Describe lace and embroidery.

12.0 Understand the sketch book.

11.7 Describe Ideas and concept of sketch look. 11.8 State Shop or reports. 11.9 Describe design development.

13.0 Understand the fashion illustration.

13.1 State composition of fashion illustration. 13.2 Describe stylization. 13.3 Describe drawing for promotion. 13.3 Describe drawing children. 13.5 Describe children as cartoons. 13.6 Describe children’s wear. 13.7 Describe illustration garments and detail.

43

14.0 Understand the drawing for manufacture. 14.1 List the basic equipment of drawing.

14.2 Describe the drawing from the dress stand. 14.3 Describe developing the template. 14.4 Describe developing the stencil. 14.5 Describe design with a template of stencil. 14.6 Describe rendering a working drawing. 14.7 Explain the garment construction.

15. Understand the specialist areas. 15.1 Describe active sportswear. 15.2 Describe swimwear / lingerie 15.3 Describe drawing accessories.

Practical : Fashion drawing 1.0 Demonstrate from life. 1.1 Draw proportion-natural, elongated figures (men’s and women’s). 1.2 Draw women’s poses. 1.3 Draw men’s poses. 1.4 Draw children’s poses. 1.5 Draw children’s heads. 1.6 Draw women’s heads. 1.7 Draw men’s heads. 1.8 Draw proportion-heads, hands and feet. 1.9 Draw women’s hands. 1.10 Draw men’s hands. 1.11 Draw children’s hands and feet 1.12 Draw babies` hands and feet. 1.13 Draw women’s feet. 1.14 Draw men’s feet. 1.15 Draw womes`s boots and shoes. 1.16 Draw men’s boots and shoes. 1.17 Draw children` boots and shoes.

1.18 Draw babies` boots and shoes. 2.0 Show skill of fabric representation.

2.1 Identify depth and shine.

44

2.2 Identify faux fur. 2.3 Identify wool and lace. 2.4 Identify wool and faux fur. 2.5 Identify folds and fringing. 2.6 Identify highlights and pleats. 2.7 Make lace. 2.8 Make embroidery.

3.0 Show skill in sketch book. 3.1 Ideas and concept. 3.2 Shop or show reports. 3.3 Design development. 4.0 Show skill in fashion illustration. 4.1 Show composition. 4.2 Show stylization. 4.3 Draw for promotion. 4.4 Draw children. 4.5 Show children as cartoons. 4.6 Prepare children’s wear. 4.7 Illustration garments and detail. 5.0 Drawing for manufacture. 5.1 Identify basic equipment. 5.2 Draw the dress stand. 5.3 Develop the template. 5.4 Develop a stencil. 5.5 Design with a template of stencil. 5.6 Render a working drawing. 5.7 Prepare garment construction 6.0 Specialist areas. 6.1 Active sportswear/Prepare. 6.2 Swimwear / lingerie/Prepare 6.3 Identify drawing accessories.

45 Ref : Books. 1. Fashion From concept of consumer.------By Gini Stephens Frings. 2. Fashion Accessories The complete 20th century sourcebook with 2000 full- colour illustrations ------ By. John peacok 3. Fashion illustration now ------- By. Laird Borrelli 4. Illustrating fashion By----- Kathryn Mc kelvey and janine Munslow.

46

T P C 0 6 2

2274 MAINTENANCE OF YARN MANUFACTURING MACHINERY – II AIMS:

1. To enable the students to operate the individual machines of spinning. 2. To enable the students to make the maintenance schedule of spinning

machinery. 3. To enable the students to set and adjust the spinning machinery as per

requirement. 4. To enable the students to dismantle and resetting the spinning machinery. 5. To enable the students to change and set all the parts of spinning machinery as

per requirement. 6. To enable the students to replace the broken or worn-out parts. 7. To make the students familiar with oiling, greasing, cleaning of spinning

machinery. SHORT DESCRIPTION : Basic concept of cleaning; Setting; Adjustment; Lubricating; Making maintenance schedule. Draft and Twist setting; Taper & coils setting; Roller setting; Tap joining; Cot buffing and pushing and cot treatment of different machinery. Practical : 1.0 Demonstrate the application of cleaning of spinning machinery.

1.1 Perform the lap former cleaning. 1.2 Perform the comber cleaning. 1.3 Perform the simplex cleaning. 1.4 Perform the ring frame cleaning. 1.5 Perform the winding machine cleaning.

2.0 Demonstrate the skill of setting of spinning machinery.

2.1 Identify setting point of lap former and set it. 2.2 Identify setting point of comber and set it. 2.3 Identify setting point of simplex and set it. 2.4 Identify setting point of ring frame and set it. 2.5 Identify setting point of cone winding machine and set it.

47 3.0 Demonstrate the skill in adjustment of spinning machines.

3.1 Identify adjustment area of lap former and adjust it. 3.2 Identify adjustment area of comber and adjust it. 3.3 Identify adjustment area of simplex and adjust it. 3.4 Identify adjustment area of ring frame and adjust it. 3.5 Identify adjustment area of cone winding machine and adjust it.

4.0 Demonstrate skill in lubricating of spinning machinery.

4.1 Identify the lubricating point and lubricate the spinning machinery. 4.2 Practice operate the individual spinning machinery. 4.3 Practice to make maintenance schedule of spinning machinery. 4.4 Practice dismantle of spinning machinery. 4.5 Practice change and reset broken parts of spinning machinery.

5.0 Perform the cotton spinning machinery maintenance.

5.1 Show the skill to set the gauge for different parts of comber. 5.2 Practice to cheek the combing cycle thorough index wheel and adjust

correctly. 5.3 Practice to set noil percentage as per requirement. 5.4 Practice to set draft and twist for simplex machine. 5.5 Practice to adjust building motion correctly. 5.6 Practice to set the required taper and coils/inch. 5.7 Practice to cot buffing and cot pushing. 5.8 Perform cot treatment. 5.9 Perform spindle tape joining. 5.10 Practice to set the tapering of the bobbin as per roving hank.

6.0 Perform the jut spinning machinery maintenance.

6.1 Practice cleaning of draw frame, spinning frame, spool winding and cop winding machine.

6.2 Show skill in lubricating of draw frame, Spinning frame, Spool winding and cone winding.

6.3 Show skill in setting of draw frame, Spinning frame, spool winding and cop winding.

6.4 Practice to make maintenance schedule of jute spinning machinery. 7.0 Demonstrate the skill in jute spinning machinery maintenance.

7.1 Practice to set the faller pin to the faller bar.

48

7.2 Calculate the faller speed in the draw frame. 7.3 Practice to set draft to the machine. 7.4 Identify to can turning and trumping motion. 7.5 Practice to adjust the stop motion. 7.6 Practice to set draft and twist of spinning frame. 7.7 Practice to set the spindle drive of spinning frame. 7.8 Practice to adjust auto stop motion of the spinning frame. 7.9 Practice of change the alignment of the package holder for conical and parallel

package. 7.10 Practice to slub catcher settings.

49 2374 MAINTENANCE OF FABRIC T P C

0 6 2MANUFACTURING MACHINERY – II AIMS

1. To enable the students to make the maintenance schedule of knitting machinery

2. To enable the students to set and adjust the knitting machinery as per requirement

3. To enable the students to dismantle and re-assemble the knitting machinery 4. To enable the students the change and set all the parts of knitting machinery as

per requirement 5. To enable the students to repair and replace the broken or worn out parts. 6. To make the students familiar with oiling, greasing & cleaning of knitting

machinery. SHORT DESCRIPTION Basic concept of Setting; adjusting; lubricating; cleaning & making maintenance schedule of knitting machinery. Practical: 1.0 Perform the cleaning, lubricating, setting, adjustment and making the

maintenance schedule of the knitting machinery. 1.1 Practice the cleaning, lubricating, setting, adjustment and making the

maintenance schedule of single jersey knitting machine. 1.2 Practice the cleaning, lubricating, setting, adjustment and making the

maintenance schedule of interlock knitting machine. 1.3 Practice the cleaning, lubricating, setting, adjustment and making the

maintenance schedule of dial linking machine. 1.4 Practice the cleaning, lubricating, setting, adjustment and making the

maintenance schedule of flat bed knitting machine. 1.5 Practice the cleaning, lubricating, setting, adjustment and making the

maintenance schedule of socks knitting machine. 1.6 Practice the cleaning, lubricating, setting, adjustment and making the

maintenance schedule of 4-Truck-circular knitting machine. 1.7 Practice the cleaning, lubricating, setting, adjustment and making the

maintenance schedule of rib knitting machine.

50 2.0 Perform the knitting machine maintenance. 2.1 Show skill in creeling technique of yarn. 2.2 Show skill in G.S.M (gms/sq-m) adjustment.

2.3 Show skill in cam and needle setting for different designs in (a) single jersey machine. (b) Double jersey machine and (c) 4-Tuck machine.

2.4 Show skill in cam and needle setting for different rib-structure. 2.5 Identify of different types of cam needle & their uses. 2.6 Practice to driving mechanism of different knitting machine.

51 2474 MAINTENANCE OF T P C

0 6 2WET PROCESSING MACHINERY - II AIMS

1. To enable the students to operate the individual machines of wet processing machines.

2. To enable the students to make the maintenance schedule of wet processing machinery.

3. To enable the students to set and adjust the wet processing. machinery as per requirement 4. To enable the students to dismantle and re-assemble the wet processing

machinery. 5. To enable the students change and set all the parts of wet processing/machinery

as per requirement 6. To enable the students to repair and replace the broken or worn out parts.

7. To make the students familiar with oiling, greasing, cleaning of wet processing machinery

SHORT DESCRIPTION Basic concept of cleaning; lubricating; adjustment/Setting of Screen; Rollers; Repairing & Replacement of parts; Screen mounting; making schedule for maintenance of the following wet processing machinery : Practical : 1.0 Perform cleaning, lubricating, and making schedule of maintenance for the wet

processing machinery. 1.1 Practice the cleaning, lubricating and make schedule of flat –bed- screen

printing machine. 1.2 Practice the cleaning, lubricating and make schedule of roller printing

machine. 1.3 Practice the cleaning, lubricating and make schedule of rotary screen printing

machine. 1.4 Practice the cleaning, lubricating and make schedule of raising and shearing

machine. 1.5 Practice the cleaning, lubricating and make schedule of stentering &

compactor machine. 1.6 Practice the cleaning, lubricating and make schedule of calendering machine.

52 2.0 Perform the maintenance of printing machine.

2.1 Perform maintenance of screen preparing tools and equipment. 2.2 Skillfully set screen in flat bed printing machine. 2.3 Skillfully set scrapper in flat bed printing machine. 2.4 Skillfully set rollers in rotary screen printing machine. 2.5 Skillfully set screen in roller printing machine. 2.6 Skillfully mount screen for rotary screen printing machine.

3.0 Perform the maintenance of finishing machine.

3.1 Skillfully set and adjust the degree of raisin & shearing. 3.2 Skillfully adjust the speed of stentering machine. 3.3 Skillfully adjust the width of fabric for the stentering machine. 3.4 Skillfully adjust the calender pressure for different types of fabrics. 3.5 Skillfully adjust shrinkage percentage for the compactor machine.

53 2574 MAINTENANCE OF GARMENTS T P C

0 6 2MANUFACTURING MACHINERY-II

AIMS 1. To enable the students to operate the individual machines of garments industry. 2. To enable the students to make the maintenance schedule of garments

machinery. 3. To enable the students to dismantle and re-setting the garments machinery. 4. To enable the students to repair and replace the broken or worn-out parts. 5. To make the students familiar with oiling, greasing, cleaning of garments

machinery. SHORT DESCRIPTION Basic concept of cleaning; lubricating; adjustment; Setting and making schedule for maintenance; Installation of head, base and thread tension adjustment of the garments machinery. Practical : 1.0 Perform the Cleaning, lubricating, adjustment, Setting and making schedule for

maintenance of garments machinery. 1.1 Practice the cleaning, lubricating, adjustment, setting and making schedule of

bar tack machine. 1.2 Practice the cleaning, lubricating, adjustment, setting and making schedule of

bar hamming machine. 1.3 Practice the cleaning, lubricating, adjustment, setting and making schedule of

collar turning machine. 1.4 Practice the cleaning, lubricating, adjustment, setting and making schedule of

cuff turning machine. 1.5 Practice the cleaning, lubricating, adjustment, setting and making schedule of

fusing machine. 1.6 Practice the cleaning, lubricating, adjustment, setting and making schedule of

velco attachment machine. 2.0 Perform the dismantle and re-assemble of knitting machinery.

2.1 Practice to dismantle and re-assemble the button hole machine. 2.2 Practice to dismantle and re-assemble the flat lock machine. 2.3 Practice to dismantle and re-assemble the collar and cuff turning machine. 2.4 Practice to dismantle and re-assemble the fusing machine. 2.5 Practice to install the base of head for flat lock and button hole machine. 2.6 Practice to adjust thread tension.

54 1571 ENTREPRENEURSHIP

T P C 2 0 2

AIMS

• To be able to understand the concept of entrepreneurship & entrepreneur.

• To be able to understand the concept of environment for entrepreneur ship.

• To be able to understand the sources of venture ideas in Bangladesh.

• To be able to understand the project selection.

• To able to understand the financial and business planning.

SHORT DESCRIPTION

Concepts of entrepreneurship & entrepreneur; Entrepreneurship & economic development;

Environment for entrepreneurship; Entrepreneurship in the theories of economic growth;

Sources of ventures ideas in Bangladesh; Evaluation of venture ideas; Financial planning;

Project selection; Self employment; Entrepreneurial motivation; Business plan; Sources of

assistance & industrial sanctioning procedure.

DETAIL DESCRIPTION

Theory:

1 Understand the basic concept of entrepreneurship & entrepreneur.

1.1 Define entrepreneurship & entrepreneur.

1.2 Discuss the characteristics and qualities of etrepreneur.

1.3 Mention the classifacation of entrepreneur.

1.4 Discuss the case entrepreneurship and mass entrepreneurship.

1.5 Discuss the necessity of entrepreneurship as a career.

1.6. Discuss the function of entrepreneur in developing countries.

1.7 Discuss the prospect of entrepreneurship development in Bangladesh.

2 Understand the concept of entrepreneurship and economic development.

2.1 Define economic development.

2.2 Discuss the economic development is a process.

2.3 Describe the entrepreneurship as a factor of economic development.

2.4 Discuss the capital accumulation or rate of savings.

55

2.5 Discuss the role of entrepreneur in the technological development and their

introduction into production process.

2.6 Discuss the entrepreneur in the discovery of new sources of resources.

2.7 Discuss the entrepreneur in the discovery of new product.

2.8 Discuss the discovery of new markets.

3 Understand the concept of the environment for entrepreneurship.

3.1 Define environment of business.

3.2 Describe the factors which effect environment on entrepreneurship

3.3 Discuss the aspects of business environment.

4 Understand the concept of entrepreneurship in the theories of economic growth.

4.1 Define entrepreneurship in the theories of economic growth.

4.2 Discuss the theory of need for achievement of Devid Mac Clelland.

4.3 Discuss the Malthusian theory of population and economic growth.

4.4 Discuss the labour theory of production and limit to growth.

4.5 Discuss the Keynesian theory of employment and output.

4.6 Discuss the stage theory of growth.

4.7 Discuss the Schumpterian theory of economic development.

4.8 Discuss the entrepreneurship motive in economic development.

5 Understand the sources of venture ideas in Bangladesh.

5.1 Define sources of venture ideas in Bangladesh.

5.2 Discuss different types of sources of venture ideas in Bangladesh.

5.3 Discuss informal sources of venture ideas in Bangladesh.

6. Understand the evaluation of venture ideas.

6.1 Define evaluation of venture ideas.

6.2 Discus the factors that influence the s election of venture ideas.

6.3 Discuss the evaluating financial aspects of business.

6.4 Discuss the determinates of the firm size.

56 7 Understand the financial planning.

7.1 Define financial planning.

7.2 Discuss the long term financial plan.

7.3 Discuss the short term financial plan.

7.4 Discuss the mid term of financial plan.

7.5 Describe the factors considered in estimation income.

7.6 Discuss the balance sheet and cash plan.

7.7 Discuss the fund flow statement.

8 Understand the concept of project selection.

8.1 Define project.

8.2 Discuss the idea of project.

8.3 Describe the guide lines for project ideas.

8.4 Discuss the sources of project ideas.

8.5 Discuss the evaluation of project ideas.

8.6 Describe the technical aspect of project.

8.7 Discuss the capital budgeting.

8.8 Discuss the discounted cash flow method.

9 Understand the concept of self employment.

9.1 Define self employment.

9.2 Describe different types of employment.

9.3 Describe the importance of business as a profession.

9.4 Discuss the reasons for success and failure in business.

9.5 Discuss the self assessment of entrepreneurial qualities.

10 Understand the concept of entrepreneurial motivation.

10.1 Define entrepreneurial motivation.

10.2 Discuss the achievement motivation theory.

10.3 Describe the means of improving achievement motivation.

10.4 Discuss the background of high need achievement.

10.5 Describe the problems associated with high need achievement.

57 11 Understand the business plan.

11.1 Define business plan.

11.2 Describe the importance of business plan.

11.3 Discuss the contents of business plan.

11.4 Describe the business plan proforma.

12 Understand the concept of sources of assistance & industrial sanctioning

procedure.

12.1 Define sources of assistance.

12.2 Describe different types of sources of assistance.

12.3 Describe entrepreneurship development cycle.

12.4 Define foreign aid.

12.5 Discuss the aid of sources.

12.6 Discuss the industrial policy.

12.7 Describe the technique of industrial policy.

58

T P C 3 0 3

1572 INDUSTRIAL MANAGEMENT-II AIMS

To provide opportunity to develop skill knowledge and understanding .

● To be able to develop the working condition in the field of industrial or other organization.

● To be able to understand develop the labour management relation in the

industrial sector.

● Handling union problems. ● The use of network planning : PERT. CPM. ● Marketing and value- analysis. ● Making case- studies on decision –making.

SHORT DESCRIPTION Basic concepts of Break-even-analysis Personnel management and human relation; Staffing and man power development; Training of staff; Job evaluation and merit rating; Morale and morale building ; Industrial dispute ;Concept of leadership; Trade union ; Labour laws and Industrial laws/ Act; Net work planning PERT & CPM; Concept of marketing; Value analysis. DETAIL DESCRIPTION Theory : 1.0 Interpret the concept of break-even analysis.

1.1 Discuss the importance of break-even analysis.

1.2 Explain the fixed cost and variable cost.

1.3 Describe the methods of preparing break-even chart.

1.4 Prepare break-even chart and determine the break-even-point.

4.5 State benefits and limitations of break-even analysis.

59 2.0 Understand the concept of personnel management and human relation.

2.1 Define personnel management.

2.2 Describe the scope of personnel management.

2.3 Discuss the importance of personnel management.

2.4 Discuss of functions of personnel management.

2.5 Discuss the disadvantages of personnel management in Bangladesh.

2.6 Describe the way solving problems of personnel management in Bangladesh.

3.0 Understand the staffing and manpower development.

3.1 Define staffing.

3.2 Discuss the importance and necessity of staffing.

3.3 Define recruitment and selection of employees.

3.4 Describe various sources of recruitment of employees.

3.5 Describe the various methods of selection of employees.

3.6 Discuss the advantages and disadvantages of internal sources of recruitment.

3.7 Discuss the disadvantages of external sources of recruitment.

3.8 Discuss manpower planning.

3.9 Describe advantages and limitations of manpower planning.

4.0 Understand the need for training of staff.

4.1 Define training and orientation of employee.

4.2 Discuss the importance and necessity of training.

4.3 Describe the Process of training.

4.4 Discuss the various methods of training of workmen, technicians and

executive personnel.

4.5 Explain the benefits of training in business and industrial concerns.

5.0 Understand the concept of job evaluation and merit rating.

5.1 Explain the terms : Task of a employee, Job evaluation, job description,

5.2 Job specification, Personnel specification , Merit rating, Job analysis.

5.3 Describe the methods of job evaluation and Merit rating.

5.4 Discuss the advantages and disadvantages of job evaluation and merit rating.

5.5 Distinguish between job evaluation and merit rating.

60 6.0 Understand the concept of morale and morale building.

6.1 State “high-morale” and “low-morale”.

6.2 Explain the methods of measuring morale.

6.3 Discuss the factors for promotion of high morale.

6.4 State the relationship between morale and productivity. 7.0 Understand the concept of industrial dispute.

7.1 Define industrial dispute.

7.2 Discuss the elements of industrial dispute.

7.3 Describe the causes of industrial dispute.

7.4 Discuss the modes of dispute settlement in Bangladesh.

7.5 Explain the terms.

- Strike.

- Lock-out

- Picketing

- Gherao

- Go slow. 8.0 Understand the different aspects of Trade Union.

8.1 State the objectives of Trade Union.

8.2 Discuss the functions of Trade Union.

8.3 State major trade unions in Bangladesh.

8.4 Explain the rules of application for registration of trade union in Bangladesh.

8.5 Explain the causes of weakness of trade unions in Bangladesh. 9.0 Understand the various Labour and Industrial Laws/Acts.

9.1 Explain the importance of labour and industrial acts/laws.

9.2 Explain the following acts and laws.

Factories Act

Minimum wages Act

Industrial Disputes Act

Workmen Compensation Act

Trade Union Act

61

10.0 Understand the concept of Network planning, PERT and CPM.

10.1 Give the meaning of PERT in solving management problems.

10.2 Explain the role of CPM in solving management problems.

11.0 Understand the concept of Marketing.

11.1 Define marketing.

11.2 State the objective of marketing.

11.3 Discuss the functions of marketing.

11.4 Explain different aspects of marketing research.

12.0 Understand the basic concept of Value analysis.

12.1 State different systems of Value analysis.

12.2 Discuss the objectives of value analysis.

12.3 Explain the depreciated value analysis.

12.4 Distinguish between ‘Book-Value’ and Actual value.

12.5 Explain value-analysis procedures and testes.

62 1573 PRODUCTION PLANNING AND CONTROL

T P C 3 0 3

AIMS

• To be able to understand the concepts, principles and techniques in terms of production in appreciating to choose efficient methods of production.

• To be able to understand the concepts, principles and techniques of production planning with a purpose in selecting appropriate site to set up a new factory.

• To be able to interpret new condition on a practical field for solving production problems.

• To be able to understand the production principles, techniques and their effect in production.

• To be able to appreciate the importance of familiarization with the various activities involved in the method and planning of production.

SHORT DESCRIPTION

Production system; Division of labor; Production planning; Localization of industry; Time study and motion study; Selection of factory site, Factory building; Plant layout; Equipment layout; Operation of factory; production control; Materials handling; Case study.

DETAIL DESCRIPTION

1 Understand different production systems.

1.1 Describe the scope and activity of production systems.

1.2 Describe the factors to be considered in production.

1.3 Distinguish job, batch and mass production.

1.4 Describe the scale of production.

1.5 Mention the merits and demerits of small scale production.

63

1.6 Mention the merits and demerits of large scale production.

2 Understand division of labor.

2.1 Define labor.

2.2 Explain the division of labor.

2.3 Describe the merits and demerits of division of labor.

2.4 Describe the efficiency of labor.

3 Understand the importance and scope of production planning.

3.1 Explain the concept of production planning.

3.2 State the different types and techniques of production planning.

3.3 Describe routing and scheduling procedures of production planning.

3.4 Describe machine loading.

3.5 Discuss product despatching. steps and techniques of despatching.

3.6 Distinguish between routine, scheduling & despatching

3.7 State the benefits of production planning.

3.8 Describe job planning execution of job and monitoring.

3.9 Describe recording and feed back.

4 Understand the importance of localization of industry.

4.1 Describe localization of industry.

4.2 Describe the factors which effect the localization of industry.

4.3 Narrate the advantages and disadvantages of localization of industry.

5 Understand the importance of time and motion study(work study).

64

5.1 Define motion study, micro-motion study and time study.

5.2 Describe work simplification.

5.3 Describe the uses of equipment of motion study.

5.4 Describe the different techniques of motion study.

5.5 Describe time study procedures and its limitations.

5.6 Describe GANT chart and the THERBLIGS.

5.7 Distinguish between time study and motion study.

5.8 Determine the standard time for a job with the help of stop watch method.

6 Understand the importance of Selection of factory site.

6.1 Describe the basis of site selection of a factory.

6.2 Describe the factors for correct selection of factory site.

6.3 Narrate the advantages of correct site selection.

7 Understand the importance of factory building.

7.1 State the characteristics of factory building.

7.2 State the different types of factory building.

7.3 Describe the factors involved in selecting factory building.

7.4 Mention the advantages and disadvantages of different types of building.

8 Understand the importance of plant layout.

8.1 Explain plant lay out.

8.2 Describe the fundamental factors of plant layout.

65

8.3 Describe the different types of manufacturing plants.

8.4 Relate the influences of processes on plant layout.

8.5 Explain the necessity of studies of plant layout.

9 Understand the importance of layout.

9.1 Define equipment layout.

9.2 Identify the factors to be considered for equipment layout.

9.3 Enlist the different types of equipment layout.

9.4 Compare product and process layout.

10 Understand the Resource scheduling.

10.1 Define resource scheduling.

10.2 Explain the purpose of resource scheduling.

10.3 Discuss the necessary information of scheduling.

10.4 Mention the different types of scheduling situation.

10.5 Discuss scheduling techniques.

10.6 Mention the need of work schedule.

10.7 Prepare a work schedule.

11 Understand the techniques involved in operation of factory.

11.1 Define operation, operation sheet and operation schedule.

11.2 Prepare operation sheet.

11.3 Prepare operation schedule.

11.4 Distinguish between process chart and flow diagram.

12 Understand the importance of production control.

66

12.1 Describe production control. 12.2 Describe the factors involved in production control.

12.3 Narrate the advantages of production control.

13 Understand the job evaluation.

13.1 Define job evaluation. 13.2 Discuss the objective of job evaluation. 13.3 Mention the importance of job evaluation. 13.4 Discuss the method of job evaluation.

13.5 Discuss the class descriptions.

14 Understand the effects of material handling.

14.1 Describe the principles, limitations and advantages of management. 14.2 Make materials handling layout. 14.3 Explain the factors to be considered for materials handling and handling

equipment. 14.4 Classify handling equipment. 14.5 Describe derrick, Gantry cranes and lifting devices. 14.6 Classify conveyors. 14.7 Describe the uses and maintenance of conveyors. 14.8 Explain economic considerations of using conveyors & other devices. 14.9 Explain safety requirements.

15 Understand the importance of case studies in the field of production. 15.1 Describe the concept of case studies in the fields of production. 15.2 Criticize the effect of proper and improper factory site. 15.3 State the advantages and disadvantages of proper and improper machine

layout and factory building.

67

T P C 2 0 2

1574 BUSINESS COMMUNICATION

AIMS ● To be able to understand the basic concepts communication and its process & forms . ● To be able to perform the information handling. ● To be able to perform in writing application for job, letter and forms of correspondences.

SHORT DESCRIPTION

Basic concepts of communication; Communication model & feed back; Types of communication; Methods of Communication; Formal & Informal Communication; Essentials of Communication Report; Writing ; Technical report; Information handling; office Management; Communication through correspondence; official and semi-official letters.

DETAIL DESCRIPTION

1. Understand the basic concepts of communication and its process & scope. 1.1 Define communication. 1.2 Define business communication. 1.3 Describe the scope of business communication. 1.4 State the objectives of business communication. 1.5 Discuss the essential elements of communication process.

2.0 Understand the communication model and feedback. 2.1 Define communication model. 2.2 State the business functions of communication model. 2.3 Define feedback. 2.4 State the basic principles of effective feedback. 2.5 Explain the essential feedback to complete communication process.

68 3.0 Understand the types of communication.

3.1 Explain the different types of communication. 3.2 Describe the advantages and disadvantages of Upward communication. 3.3 Describe the advantages and disadvantages of downward

communication. 3.4 Distinguish between upward and downward communication. 3.5 Define two-way communication. 3.6 Describe the advantages and disadvantages of two-way communication.

4 Understand the methods of communication. 4.2 Define communication Method. 4.3 Discuss the various methods of communication. 4.4 Describe the advantages and disadvantages of written communication. 4.5 Describe the advantages and disadvantages of oral communication. 4.6 Distinguish between oral and written communication.

5 Understand the formal and informal communication.

5.2 Define formal communication. 5.3 Describe the advantages and disadvantages of formal communication. 5.4 Define informal communication.

5.5 Discuss the advantages and disadvantages of informal communication. 5.6 Distinguish between formal and informal communication.

6 Understand the essentials of communication.

6.2 Describe the essential features of good communication 6.3 Describe the barriers of communication. 6.4 Discuss the means for overcoming barriers to good communication.

69

7 Understand the report writing. 7.2 Define report. 7.3 Define business report. 7.4 State the essential qualities of a good report. 7.5 Describe the factors of be considered while drafting a report. 7.6 Explain the components of a report. 7.7 Describe the classification of report.

8 Understand the technical report. 8.2 Define technical report. 8.3 Mention the uses of technical report. 8.4 Describe the types of technical report. 8.5 Distinguish between a technical report and general report.

9 Understanding the information handling. 9.2 Define data, facts and events. 9.3 State the sources of information. 9.4 Describe the channel of communication relevant to information. 9.5 Define management information systems (MIS) 9.6 Discuss the channel of presentation of data in the report.

10 Understand the office management. 10.1 Define office and office work. 10.2 State the characteristics of office work. 10.3 Define filing and indexing. 10.4 Discuss the methods of filing. 10.5 Discuss the methods of indexing. 10.6 Distinguish between filing and indexing.

11 Understand communication through correspondence.

11.1 State the types of correspondence. 11.2 Define commercial letter. 11.3 Mention the objects of commercial letter. 11.4 State the different parts of a commercial letter. 11.5 Distinguish between commercial letter and personal letter.

70 12 Understand the official letters.

12.1 Define official and dame-official letter. 12.2 Distinguish between official letter and dame-official letters. 12.3 Prepare the following letters:

interview letter, appointment letter, joining letter and application for employment.

12.4 Prepare the complain letters. 12.5 Draft a tender notice to be published in a daily newspaper.