sgunited-e2i manufacturing, transport & logistics virtual

1 JOB LISTING BOOKLET

SGUnited-e2i Manufacturing, Transport & Logistics Virtual

Career Fair JOB LISTING BOOKLET

Date: 17 Sep 2021, Friday – 30 Sep 2021, Thursday

About e2i (Employment and Employability Institute)

e2i is the empowering network for individuals and companies seeking skills and solutions for growth. Since 2008, e2i has assisted

more than 500,000 individuals through our career guidance, professional development, and job matching services. With an

extensive network of partners, e2i offers hiring, training and productivity solutions to businesses. We are an initiative of the

National Trades Union Congress (NTUC) to support nation-wide manpower and skills upgrading initiatives. For more

information, please visit www.e2i.com.sg.

http://www.e2i.com.sg/


Content Page BOOTH PAGE #1 Aerospec Supplies ................................................................................................................................ 3

#2 Beyonics International ..................................................................................................................... 6

#4 Cell ID ................................................................................................................................................ 15

#5 Energizer Singapore ........................................................................................................................... 17

#6 Gardenia Foods (S) ............................................................................................................................. 18

#7 Green Harvest ................................................................................................................................... 20

#8 J&T Express Singapore ....................................................................................................................... 21

#9 Katoen Natie ..................................................................................................................................... 28

#10 LF Logistics Services ........................................................................................................................... 30

#11 SG Sagawa Ameroid ........................................................................................................................... 33

#12 SMRT Buses / SMRT Trains ................................................................................................................. 36

Please note that there will be photo-taking/video taking at this event. By participating in this event, you hereby

consent to have your photograph/video taken by e2i for the purposes of marketing/promotion/publicity and to be

published on media platforms, public or otherwise.


#1 Aerospec Supplies Established in 1991, Aerospec specialised in aviation manpower supply, providing licensed aviation

technicians, aircraft engineers and airport ground staff support. We also provide aviation manpower for

maintenance, repair and operation (MRO). Over the years, we have extended our wings and now we provide

skilled manpower in other sectors too such as logistics, food and beverage, defence and military.

Job Positions Pre-requisites Key Responsibilities Working Hours / Location

Assembly Technician

• Engineering background

• NITEC in Automotive Technology, Mechatronics / Mechanical Engineering or equivalent

• Read & understand basic process instructions

• Use basic hand tools, power tools & production equipment related to assembly trade such as torque wrench & lifting equipment

• Team player with good interpersonal skills

• Work under pressure & self-motivated, independent

• No criminal record

• Lead & manage a station in the assembly & installation of electrical, hydraulic & automotive systems into platform under production phase

• Ensure work adheres to the required safety & quality standards in the company

• Monday - Friday

• 7.30am to 5.15pm

• Jalan Boon Lay

Automotive Engine Technician

• Engineering background

• NITEC in Automotive Technology, Mechatronics / Mechanical Engineering or equivalent

• Read & understand basic process instructions

• Use basic hand tools, power tools & production equipment related to assembly trade such as torque wrench & lifting equipment

• Team player with good interpersonal skills

• Work under pressure & self-motivated, independent

• No criminal record

• Perform Maintenance, Repair and Overhaul (MRO) jobs for Mechanical components e.g., Heavy Duty Diesel Engines and Transmissions

• Report to Platform head on status updates of above-mentioned jobs

• Work closely with Platform Head to ensure job status are promptly updated and deliverable are met within datelines

• Work within a team of technicians in troubleshooting and fault finding with the aid of OEM manuals and work instructions

• Responsible for own consumables and tooling and ensure they are adequate to ensure smooth workflow. Familiar with the use of hand tools such as torque wrenches and pneumatic equipment

• Monday – Friday

• 7.30am to 5.15pm

• Campsite (island wide)



Machinist • Nitec (Intermediate)/ Nitec in Precision Engineering/ Precision Machining or Equivalent Relevant experience in the aerospace industry preferred

• Minimum of 2 years relevant experience

• Team player with positive attitude

• Able to work on rotational (night shift) and weekend shifts

• Operating CNC machines

• Coordination

• Perform CNC machining operations that meet quality standards. (i.e., Grinding, Milling, EDM, Super-drill, Wire-Cut)

• Additional duties such as Laser Clad Operations, Plasma/Thermal Spray Operations, polishing, shot peening, blasting and Braze Alloy application may be required

• Additional tasking as required by the supervisor


• 7.30am to 3.50pm

• Tuas

Polisher/Grit Blaster/Machine Operator

• Minimum GCE ‘O’ Level

• With or without experience needed


• Able to perform hands-on job

• Perform polishing operations using various equipment such as bench mounted and/or hand-held tools to refurbish aircraft components that meet quality standards

• Additional duties such as blasting, and process preparation may be required



• 7.30am – 3.50pm

• Tuas

Precision Products Technician

• Minimum GCE ‘O’ Level

• Able to speak, read and understand English

• Operate the machines

• Operate machine safely and efficiently for production processing

• Visually inspecting each part for quality check

• Ensure machine are maintained in good and safe working condition.

• Other ad-hoc assigned duties


• 8.00am – 5.30pm

• Woodlands or Gul Circle

QC Inspector • Nitec in related field.

• With or without experience needed


• Inspection

• Inspect and calibrate tools, fixtures and gauges

• Coordinate measuring machine (CMM) operating and programming

• Engraving of lot code and any other part marking.



• 7.30am – 3.50pm

• Tuas

Special Process Technician

• Minimum GCE ‘O’ Level/ SPM holders or equivalent

• Able to speak, read and understand English

• Able to work on 3 rotational shifts

• Operating equipment associated with Chemical Stripping and Cleaning, Blasting, Furnaces and Coating, and Effluent Treatment Plant System


• 7.30am – 3.50pm

• Tuas



• Able to support overtime during weekdays and weekends when required

• Operate machines

• Responsible for production output and quality, safety and compliance of processes performed

• Responsible for working in a team and contribute to improvements


Warehouse Assistant

• Able to work rotating shift – change shift every 2 weeks

• Relevant warehousing experience in civil aviation regulation will be added advantage

• Able to operate electric stacker/fork-lift preferred

• Able to use computer and with knowledge of SAP preferred

• Having Class 3 driving license will be an advantage

• SAP Experience

• Perform receipt checks on materials

• Perform materials for repair and disposal

• Storing and retrieval of materials

• Perform packing and preservation of materials

• Perform collection and delivery of materials

• Perform stock count and material condition checks

• Process materials for air/sea freighting

• Shift Work hours - 6.30am – 2.30pm - 3.00pm – 11.00pm

• Paya Lebar Airbase

• Sembawang Airbase

• Changi Airbase

• Tengah Airbase


#2 Beyonics International Founded in 1981, Beyonics is headquartered in Singapore and provides Advanced Precision Engineering and

Manufacturing Solutions for the Healthcare, Automotive and Technology sectors.


CNC Milling CAD CAM Programmer & CNC Machinist

• Set up and operate CNC milling machining job effectively and efficiently and meeting quality & delivery requirements

• Basic Knowledge in CNC milling NC programming using UG NX - 8 /10

• Knowledge in CNC milling operate in Fanuc control system

• Wire-cut/Super drill machines on workpieces according to job order

• Any other related toolroom duties as and when required by the Tooling Manager.

• Able to work independently, responsible, and diligent


• 8.15am to 5.45pm

Coordinator, Production

• Have exposure to Plastic Molding Production environments

• Assist HOD in day-to-day coordination on Production activities

• Work with Planner on Production WO and Machines loading

• Schedule Production machines loading

• Preparation material for daily production machines (MRF and AMR)

• Co-ordinate the OS parts. If any

• Liaise between Production and Planner to ensure smooth production completing WO.

• Monitor, Control and manage of Production WO progress.

• Follow-up and assist on production day to day shipments

• Assignments: a. Production daily output

and yield lost data entry b. E application (Leave

apply & E TMS)


• 8.15am to 5.45pm

Engineer, Project

• Diploma in Engineering (Manufacturing/Mechanical) or equivalent

• Stampings’ Tool Design and its manufacturing experiences

• Project management experiences

• Some Purchasing experiences

• Coordinate design, fabrication, assembly, and tool testing (toolroom and at vendors’ site)

• Support Purchasing in sourcing and gaining approval for new secondary process sources

• Verifies & qualify tooling

• Ensure tool drawings are updated to the latest change

• Monday - Friday

• 8.15am to 5.45pm



• 3 years in the manufacturing industry

• Assist Q.A dept in customer quality issue.

• Attend to new inquiries.

• Work out part and tooling quotation.

• Liaise with customer’s engineering group for products’ design change

• Upkeep engineering changes

Engineer, Toolroom

• 5 to 10 years of experience in plastic injection for complex connector or terminal tools

• Able to study FA report, evaluate, diagnose or troubleshoot/ tweaking connector tool problems

• Handled connector customers before

• Conduct tool mold design review, mold trial review, project review meetings

• Liaise with Designers, Manufacturing Engineers, Planners on the progress of tool fabrication to achieve 100% on-time delivery

• Provide timely updates and Gantt charts to Team

• Attend mold testing and perform molding process optimization to achieve part consistency quality

• Study FA report for dimensional rectification according product form fit functions as required by the customer

• Lead team in problem solving – identification of problems and analysis of the root cause.

• Liaise with suppliers for mold outsourcing on all tooling related issues

• Provide Team with technical support and customers with tooling feasibilities. Prepare quotation for engineering change requests

• Follow up on tool approval with customer & ensure all tool POs are closed timing & properly

• Build good relationship with customer engineering, quality & procurement team


• 8.15am to 5.45pm

FA Technician • Ability to read and interpret product 2D drawing

• Demonstrate working knowledge of Brown & Sharpe CMM (coordinate measuring machine), Vision

• Complete first article inspection per customer specifications and maintain appropriate records

• Responsible for measuring parts, steels and report any

• Monday - Friday 8.15am to 5.15pm

• Saturday 8.15am to 12.15pm



Scope and other precision measuring equipment

• Ability to generate simple CMM program

• Minimum 2+ years of quality related experience

• Plastic injection Molding/Medical/Automotive components experience preferred

• Ability to apply Statistical Process Control (SPC), Geometric Dimensioning and Tolerance (GD&T)

• Accurate and attentive to detail with computer literacy skills

• Ability to communicate with others to convey information effectively

• Ability to assist and support others

findings to Engineer for submission to customer

• Identify the appropriate measurement method and create measurement work instructions

• Coordinate, perform, and maintain calibration procedures

• Verify tool changes and process dimensions after tool modifications/rectifications

• Perform capabilities studies, gauge repeatability analysis.

• Understand and utilize geometric tolerancing

• Maintain good 5-S and cleanliness of FA room under his care and observe safety regulation

Machinist (EDM)

• Min 2 ~3 years working experience in plastic injection Mould manufacturing

• Minimum secondary education

• Able to read 2D / 3D drawing

• Set up and operate EDM machining job effectively and efficiently and meeting quality & delivery requirements

• Excellent hands-on in operation EDM machine brand Makino, Sodick

• Maintain proper record of mould repair and maintenance

• Maintain good 5-S and cleanliness of Toolroom under his care and observe safety regulation

• Any other related toolroom duties as and when required by the Tooling Manager

• Monday - Friday 8.15am to 5.15pm


Material Handler

• Able to carry 25kg of resin bag and top up to machine dryer

• Able to read English and do simple calculations

• Primary education

• Handle and prepare materials to support production

• Perform material transfer to production and work closely with store to ensure no delinquency

• Ensures no mixed up of materials

• Proper storage of materials.

• Practice GMP and good housekeeping at all areas

• Ensure correct product packaging, proper identification

• Monday – Friday 7am to 3pm

• Saturday 7am to 1pm



and segregation of material and FG

• Ensure correct materials are loaded to respective machine.

• Recommend quality improvement measures to immediate superior

Production Operator

• NA • Check parts of product and sort out the faculty ones

• Pack products according to packaging instructions

• Perform specific operation on machine for insert molding

• Perform re-work, as necessary

• Maintain good housekeeping

• A Shift: Monday – Friday 7 am to 3 pm Saturday 7 am to 1 pm

• B Shift: Monday - Friday 3 pm to 11 pm Saturday: 1 pm to 7 pm

• C shift: Monday - Friday 11 pm to 7 am

Quality Inspector

• Able to use QC equipment

• Secondary education

• Perform daily inspection tasks designated by the supervisor

• Perform hourly in-process inspection and report abnormality/raise NCMR if necessary

• Perform outgoing inspection/out of box audit

• Maintain all quality inspection reports

• A Shift: Monday – Friday 7 am to 3 pm Saturday 7 am to 1 pm

• B Shift: Monday - Friday 3 pm to 11 pm Saturday 1 pm to 7 pm

• C shift: Monday - Friday

• 11 pm to 7 am

Senior Buyer/Planner//Buyer/Planner

• Diploma in Electronics / Material Management

• Min 3 years relevant experience in manufacturing environment

• Experience in Plastics Molding and Plastics Assembly will have an added advantage

• Proficiency in Microsoft Office, including Word, Excel, PowerPoint and Oracle Fusion

• Material planning and buying – strictly based on customer firm demand and authorized forecast to issue purchase orders to suppliers

• Work order releasing – strictly based on customer firm demand or authorized forecast to release to production

• To utilize 100% MRP system for material planning and purchase and work order release


• 8.15am to 5.45pm



• Disposition RTV within minimum working days in MRB locations

• Review and adjust material delivery schedules to suppliers accordingly to customer demand and forecast

• Daily production meeting with operation to review on machine or assembly loading n corresponding to the changes from customer demands

• Material Expediting – To assure supply of materials to operation requirements on timely manner

• 100% on time delivery performance is the goal for every supplier

• Review monthly inventory report – Obsolete and Excess.

• Control and monitor component inventory to ensure maintenance of inventory at appropriate level

Snr/ Process Engineer (Assembly)

• Degree/Diploma in Engineering-related discipline, preferably in Mechanical, Mechatronics etc.

• At least 3 years related experience/knowledge in assembly line, preferably in medical and automotive industries

• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA, PPAP, APQP and IOPQ

• Possess strong leadership, positive attitude, analytical and good interpersonal skills

• Results-oriented, meticulous and a self-motivated team player

• Analyze defect reported in-house and customer with quality, tooling, and production

• Attend to all daily quality and process related issues

• Prepare and execute process validation protocols (MVP/IOPQ) and reports for new and existing product, process and equipment with tooling and quality personnel for all customers

• Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap.

• Perform internal quality system audit

• Train and assess production staff on processes as well as WI as and when required

• Attend routine production and quality meetings

• Execute engineering change notice from customer/ in house

• Monday to Friday

• 8.15am to 5.45pm



and update ERP system promptly

• Compliance to all regulatory and in house system requirements especially for medical and automotive customers

• Prepare instructions/procedures for the assembly processes, ECN/ECR/Deviation are drafted & executed

• Problem solving techniques - must be able to hands on

• To ensure all equipment on the mechanical assembly lines are in good functioning state

• Equipment selection / reliable fixture designs for new projects and improvements and assist in other projects assign by the superior

Storekeeper • Able to do data entry

• Able to use Microsoft Office

• Minimum secondary education

• In charge of all Logistic-warehouse related activities from receiving, issuing, shipment packings and inventory arrangement

• Daily maintenance of warehouse inventory arrangement according to FIFO, 5S, safety, ensuring locator/quantity accuracies and adherence to any other requirements at all times

• Ensure daily receiving / issuing transaction movement are through FIFO flow, ensure item and quantity issuance correctness

• Monday to Friday 8.15am to 5.45pm

• Saturday 8.15am to 12.15am

Supervisor Toolroom

• Supervise a team of Mould Makers & Machinists in new & rectify of precision moulds

• Plan work schedule for new mould-making, modification & rectification

• Study FA report for dimensional rectification according to product specification

• Supervise a team of Mould Makers & Machinists in new & rectification of precision moulds

• Work with respective department Leaders & Engineers so as to maximise effectiveness & productivity in new mould making

• Plan work schedule for new mould-making, modification & rectification


• 8.15am to 5.45pm



• Provide sound solution & quality improvement measures to problem arising from daily operations

• Identify & initiate actions to prevent occurrence of mould related issues

• Maintain & update all mould making documentation

• Study FA report for dimensional rectification according to product specification

Technician, Production

• 2-3 years’ experience in plastic molding

• Set up and troubleshoot molds and processes. Carry out routine mold maintenance during run

• Ensure molding process setting is according to the Molding Data Sheet and set cycle time

• To ensure all areas abide to the safety regulation, any concern on violation that may lead to safety issue has to be reported to his superior for action

• Support production to meet customer demands

• Monday – Friday 3pm to 11pm

• Saturday 1pm to 7pm

Toolmaker • Min GCE N level.

• Min. 2 years’ experience in related industry.

• Familiar with Toolroom equipment and able to operate conventional machine.

• Able to interpret 2D details drawing.

• Work with Supervisor & Assistant Supervisor so as to maximize effectiveness and productivity in mould making and mould repair

• Perform new mould fitting, assembly and attend trial run test

• Work with Engineer and Designer on improvement of the mould

• Analyses specifications using knowledge of tool design, mould making and assembly procedures to build tools required in manufacturing

• Sets up and operates conventional machines to fabricate tooling components, fits and assembles these components into production tooling

• Maintain proper record of new, repair and maintenance moulds

• Monday – Friday 8.15am to 5.15pm




• Perform tool verification inspections for every new mould

• Provide sound solution to problem arising from daily operations

• Identify and initiate actions to prevent the occurrence of mould related issues

• Fabricates and assembles parts to make jigs, fixtures and gauges

• Maintain good 5-S and cleanliness of Toolroom under his care and observe safety regulation


#3 California Laundry We are a hotel laundry and dry clean vendor. We have been in the hospitality industry for the past 51 years.

We are serving most of the major hotels in Singapore.


Laundry Operator

• To operate various folding machine

• Towel Machine

• Duvet / Bedsheet Machine

• Folding of Linen

• Hardworking

• Able to work independently

• Able to work on Weekend and Public Holiday

• Team Player with positive attitude

• 1pm to 10pm

• 6pm to 10pm

• 18 Neythal Road Singapore 628583

Operation Executive

• Learn to check on hotel guest parcel, bedsheet linen and issuing of daily delivery order.

• Hardworking




• 9am to 7pm

• 12pm to 10pm

• 18 Neythal Road Singapore 628583

Passenger Van Driver

• Picking and Sending staff back and forth Jurong West and Toa Payoh

• Picking staff from Lakeside MRT & Bus Stop

• Hardworking




• First Week- Mon to Thurs

• Second Week- Mon to Wed

• Third Week- Mon to Thurs

• Fourth Week- Mon to Wed


#4 Cell ID Established in 2014, Cell ID Pte. Ltd. is a Singapore-incorporated med-tech company that designs, researchs,

develops and manufactures diagnostic tests. The company focuses in near-field Point-of-Care (nf-POC) and

decentralised molecular diagnostic platform technologies.


Manufacturing Technician

• Biomedical Engineering

• Diploma / ITC / NTC certificate or equivalent in Engineering, Sciences, Chemistry, Biomedical, Lifesciences, Pharmaceutical or related industry, preferably with two years’ experience in manufacturing environment

• Good team player, able to work independently with minimum supervision and under stress environment, and self-motivated

• Ability to communicate with all levels of staffs, customers, vendors, and representatives from the regulatory bodies. Proficiency in written and communication skills in English

• Able to work in a cleanroom environment with the required gowning and personal protective equipment (gloves). Willing to work in day and night shifts

• Good interpersonal, coordinating and organization skills

• Ability to interpret within established procedures and follow. Careful with details and systematic in resolving manufacturing issues

• Knowledge of Microsoft Office and Outlooks, Adobe Acrobat

• Planning and co-ordinate processing of materials within production line to meet production numbers

• Manage contractors, service providers and machine/equipment suppliers to carry out facility installation, upgrading and maintenance activities

• Ensure good housekeeping on the production floor

• Perform all essential services such as security, maintenance, cleaning and waste disposal, recycling, pest control and utilities

• Monitoring of production yield, quality, cycle-time, etc

• Carry out minor repairs and breakdown trouble-shooting works of production machines/equipment.

• Perform scheduled maintenance, calibration and operation of all machines and equipment

• To assist / take charge of ad-hoc projects as assigned by managers

• 8.30am to 5pm

Production Operator

• Min GCE N Level • Visually inspect products to ensure they conforms to acceptance criteria.

• Rotating shift



• Pack and label products and items according to work orders and work instruction

• Maintain clean work area

QC Technician • Science (Chemistry)

• Nitec / Diploma in Biotechnology is preferred or Sciences, Chemistry, Biomedical, Lifesciences, Pharmaceutical or working experience in related industry.

• Entry level with relevant qualifications are welcome to apply - training will be provided!

• Preferably with 2 years’ experience in medical manufacturing environment

• Practical computer skills and knowledge with hands-on ability (Microsoft Office, Outlooks, Adobe Acrobat)

• Knowledge in ISO13485 / ISO9001 quality management systems standards or equivalent.

• Quality Control 7 tools, Risk analysis tools (FMEA), Statistical Process Controls (SPC).

• Problem solving skills (DMAIC, Root cause analysis, Eight-Disciplines, etc.)

• Plan, perform and document the First Article Evaluation, Incoming, In-Process and Out-going quality assurance, inspections, and records

• Plan, perform and document the control of non-conforming parts, materials & products process, including support for the Material

• Review Board, disposition, follow-up actions until close-out

• Download and analyze quality information from quality system to be used for Quality reports

• Generate Quality metrics

• Prepare Statistical Process Control Charts

• Assist for authorizing the release of final products to customer. Prepare quality documentation or equivalent

• Rotating Shift


#5 Energizer Singapore For more than 100 years, Energizer—through continuous invention and innovation—has played a vital role

in how people live, work and communicate. We are a consumer goods company operating globally in the

broad categories of household and personal care products. With 75 years’ local set up, Energizer Singapore

continues to provide consumers with innovative, high-quality and technologically advanced batteries and

lighting products.


Material Handler

• Forklift License preferred

• Dexterity

• Basic English communication skills

• Basic understanding of standard operating processes

• Good process Judgment

• Basic Technical skills (mechanical)

• Supplies battery to line, transfers products from packing to FG

• Do stretch wrap, scan the FG, do month end stock count

• Operates equipment, conducts daily checks, material handling and reporting

• Operates manual material handling equipment.

• 4-day work week

• 12 hours fixed/rotating shift work

• Working hours: 6.30am to 6.30pm /6.30pm to 6.30am

• 25 Gul Way

Production Operators

• Basic English Communication

• Able to multi-tasked

• Able to lift 15-20 kg of batteries

• Able to stand long hours

• Operate manufacturing machines

• Conduct simple tooling change, daily checks, material handling and

• Check quality and quantity of packed cell

• Physically demanding job Training will be provided

• 4-day work week

• 12 hours fixed/rotating shift work

• Working hours: 6.30am to 6.30pm /6.30pm to 6.30am

• 25 Gul Way

Technician • Higher Nitec in Electrical Engineering

• Minimum 2 to 3 years working experience in manufacturing industry

• Preferable working experience with PLC programming for automation equipment/process

• Preferable working experience and knowledge of electrical safe work procedure

• Good knowledge of AutoCAD, Microsoft Office etc.

• Experience in automation, process, and instrumentation. pneumatic system and feedback controls

• Experience as a team lead in developing new control systems for process/manufacturing equipment

• Experience with communication using network protocols and PLC control programming

• 8.00am to 5.30pm

• 25 Gul Way

• Transport provided at designated pick-up points.


#6 Gardenia Foods (S) Being Singapore’s premiere sandwich loaf bakery, Gardenia is constantly improving and adapting to suit

consumer needs while staying true to its core brand values.


Maintenance Technician

• Diploma / Polytechnic/ ITE Diploma, Advanced / Specialist/ Management/ Graduate Diploma

• Years of Experience Required: 1-5 years

• Install and maintain electrical/ mechanical equipment and machine parts

• Work with production staff in projects/ work orders

• Inspect, test, and evaluate equipment performance on a regular basis

• Respond to urgent/ emergency situations

• 3 rotating shifts (7am to 3pm, 3pm to 11pm & 11pm to 7am)

• 224 Pandan Loop & 230 Pandan Loop

Production Operator

• Lower Secondary Education / Secondary Education without GCE 'O' / 'N' Level or equivalent

• Picking/Packing

• Operator machine

• 3 rotating shifts

• 224 Pandan Loop

Production Operator


• Picking/Packing


• Staggered time (7am -3pm, 8am to 4pm, latest 3pm to 11pm)

• 230 Pandan Loop

Production Supervisor

• Upper Secondary Education / GCE O Level, ESS/ES WPLN 5 and above


• Operate & control the material handling system

• Ensure all SOP for operating of equipment and cleaning are executed

• Execute the daily production processes accordingly as planned on schedule, to meet Sales cut-off time

• Supervise the production process


• 230 Pandan Loop

QC Supervisor • Certification / Professional Certificate / NITEC


• Inspection to ensure all the process parameter and product quality

• Monthly duty roster

• Conduct GMP audit


• 8.30am to 5.30pm

• 230 Pandan Loop

Sales Executive • Class 3 driving license

• Upper Secondary Education / GCE O Level, ESS/ES WPLN 5 and above


• Ensures Retail Execution Excellence based on plans

• Builds Relationship with store & buyer personnel in his territory

• Competitor Activities Tracking and Reporting

• Monday to Saturday

• 8.30am to 5.30pm

• 230 Pandan Loop

Temp Driver • Class 3 driving license

• Primary Education / Primary Education with PSLE/PSPE or equivalent

• Deliver breads to Supermarkets/ Convenience Stores

• 3am to 11am

• 230 Pandan Loop




Temp Production Operator


• Picking/Packing


• Staggered time (7am -3pm, 8am to 4pm, latest 3pm to 11pm)

• 230 Pandan Loop

Van Salesman • Class 3 driving license

• Primary Education / Primary Education with PSLE/PSPE or equivalent


• Deliver breads to Supermarkets/ Convenience Stores

• 3am to 11am

• 230 Pandan Loop


#7 Green Harvest Green Harvest prides on using Singapore’s first & largest Hydroponics Glass Greenhouse to grow a mixture

of both Asian and Western greens. With years of research and use of the latest farming technology, we are

able to produce vegetables that are fresh and without pesticides for Singapore.


Vegetable Packer

• 5 days work week shift, including rotating on weekends as well

• Candidates with experience working in factory production or supermarket environment will be preferred

• Able to speak and understand simple English

• Able to withstand long hours of standing

• Friendly and responsible

• Harvesting Trim, cut and place vegetables in basket

• Perform quality checks and follow Company guidelines when harvesting vegetables

• Packing Pack, weigh and place vegetables onto the packing machine or conveyor belt

• Perform quality checks and follow company guidelines while packing vegetables

• 8 am to 5 pm


#8 J&T Express Singapore Founded in 2015, J&T Express is a tech-based logistics company that has expanded swiftly in the Southeast

Asia region with express courier delivery as its core business. In Singapore, J&T Express offers a variety of

eCommerce solutions catered to eBusinesses - Last Mile Delivery, Fulfilment, Sales Channel Management

and International Delivery.


Collection Driver (West)

• Min. Class 3A Driving

License

• Physically fit

• Ensure timely delivery of goods to the customers and goods collections from Senders

• To assist in the receiving, picking, and loading and unloading of goods Receiving and verifying of goods

• Provide excellent customer service

• Other warehouse duties as assigned


• Saturday/Sunday 11am to 3pm

Cross Border Operation Assistant

• Min. PSLE English Pass

• Proficiency in Microsoft

Office

• Physically fit

• Able to handle face-

paced environment

• Responsible for managing import/export shipment including shipment receiving, scanning, packing, inspection, labeling, etc

• General warehouse duties

• Any other ad-hoc duties as assigned by the supervisors or operation managers



Customer Service Officer


• Proficiency in Microsoft Office

• Min. 1yr of relevant

experience

• Physically fit

• Able to handle face-paced environment

• Customer orientated

• Able to work as a team

• Work a team of qualified agents who handle a volume of inbound emails, and chats with knowledge and efficiency

• Identify and address customer needs with a goal of complete satisfaction

• Follow company communications guidelines and procedures under minimal supervision

• Recommend improvements and drive process efficiencies

• Handling inbound calls regarding general enquiries

• Any other duties as assigned

• Monday – Sunday

• 5 Days Work

• 9am to 6pm

• Work schedule will rotate within own team

Delivery Rider • Min Class 2 Driving

License

• Physically fit

• Ensure timely delivery of goods to the customers and goods collections from Senders

• To assist in the receiving, picking and loading, and unloading of goods Receiving and verifying goods

• Provide excellent customer service

• Other warehouse duties as assigned



Fleet Supervisor/ Assistant Supervisor

• Min. 2 years of relevant experience

• Class 3 Driving License

preferred

• Lead and guide a group of Team Leads (TL) & Drivers to carry out Daily-Start-Work-Briefing (DSWB).





• Physically fit


paced environment

• Improve efficiency with Network, Route & Transfer Planning for all Truck / Van Drivers

• Assign and monitor daily pickup tasks to Drivers; including, arranging available Drivers for delivery tasks when no pickup is required

• Ensure 100% daily Enroute-Scan and, timely pickup as per merchant requests

• Report and update tasks assigned and pickup status.

• Analyze report status, carry out accountability checks and, arrest any ‘pickup issue’

• Attend to Merchants’ complains and resolve them on a timely basis.

• Ensure 100% Return-to-Sender (RTS) parcels daily.

• Manage and provide prompt response to assigned Key Account Customers for any pickup query / issue.

• Work with Sales, Customer Service (CS), Hub Operations and Fulfillment (FF) teams to ensure smooth / efficient pickup operations.

• Liaise with Hub Ops. for parcel pickup accuracy and accountability upon Arrive-at-Hub.

• Manpower planning for both ‘Business-As-Usual’ and ‘Campaign’ days.

• Monitor Vehicles Servicing Schedules to ensure serviceability of all vehicles.

• Liaise with Vehicles Vendors on Accident Repairs, Vehicles Transfer or Replacement matters.

• Assign vehicles to Drivers and ensure accountability of all vehicles.

• Emphasize to Drivers to abide by existing Traffic Rules & Regulations at all time.

• Adhere to the company’s

Workplace Safety, Health & Security

(WSHS) Policy and implement the

associated bizSAFE protocols.





Operation Assistant Supervisor / Supervisor (East)



• Min. 1 year of

inbound/outbound

experience preferred

• Physically fit


paced environment

• Oversee efficiency of operational processes and workflow

• Participate in goal setting for team members and monitor progress

• Lead the whole team and effectively assign work to the team to ensure smooth daily operations

• Ensure efficient stock accountability duties are carried out within the team, provide administrative support when updating inventory

• Monitor and report on department performance

• Identify problems, and research methods to improve operations and reduce costs

• Ensure accuracy and timely update of data into the computer system;

• Ensuring the accuracy of shipments and supporting documentation is correct

• Take charge of the safety of the working environment and ensure equipment are kept up to performance standard

• Ensure compliance with company policies, procedures and regulations

• Perform all other ad-hoc duties

assigned by superior





Operation Assistant Supervisor / Supervisor (West)



• Min. 1yr of

inbound/outbound

experience preferred

• Physically fit


paced environment

• Oversee efficiency of operational processes and workflow

• Participate in goal setting for team members and monitor progress;

• Lead the whole team and effectively assign work to the team to ensure smooth daily operations

• Ensure efficient stock accountability duties are carried out within the team, provide administrative support when updating inventory

• Monitor and report on department performance

• Identify problems, and research methods to improve operations and reduce costs

• Ensure accuracy and timely update of data into the computer system;

• Ensuring the accuracy of shipments and supporting documentation is correct


• Saturday: 9am to 1pm





• Take charge of the safety of the working environment and ensure equipment are kept up to performance standard

• Ensure compliance with company policies, procedures and regulations

• Perform all other ad-hoc duties

assigned by superior

Sales Support Officer




experience

• Physically fit

• Able to handle face-paced environment

• Customer orientated

• Able to work as a team

• Manage and supervise multiple conversation platform on daily enquiries

• Analyse, monitor, and report seller's performance using operational metrics

• Identify and report current and potential issues faced by sellers.

• Understand pain points from sellers and propose solutions to solve them

• Solve operational issues faced by local and overseas sellers on a day to day basis

• Rectify abnormal transaction and coordinate between Operation, Customer Service and Clients

• Assist on account creation and service update

• Provide administrative support to local and overseas Clients.

• Recommend any possible

improvement and process enhance

within the area of responsibility



Warehouse Assistant (East)


experience

• Physically fit


paced environment

• Storing of parcels in the warehouse and updating of records

• Assist in issuing and receiving of parcels to delivery drivers

• Ensure that all parcels are handled with care

• To locate urgent parcels as and when required

• To ensure and maintain proper housekeeping at all times


• Able to work independently or in a

team

• Monday - Friday 7am to 4pm

• Saturday/ Sunday 7am to 11am 8am to 12pm 10am to 2pm (rotate)



experience

• Physically fit


• Monday -Friday 2pm to 11pm

• Saturday/ Sunday




paced environment







team

12pm to 4pm 2pm to 6pm 6pm to 10pm (rotate)



experience

• Physically fit


paced environment








team

• Monday -Friday 10pm to 7am

• Sunday 10pm to 7am

Warehouse Assistant (West)


experience

• Physically fit


paced environment








team




• Saturday 1pm to 5pm (rotate)

Warehouse Assistant (West)


experience

• Physically fit


paced environment







• Saturday







team

1pm to 5pm (rotate)

Warehouse Assistant Fulfilment

• Min. 1yr of relevant experience

• Forklift License preferred

• Physically fit


paced environment

• Picking of products in the warehouse for customer's fulfilment. Ensuring there are no backlogs in the order fulfilment

• Perform inventory checks and ensure data integrity, with the highest stock’s availability for customers

• Perform administration duties for incoming & outgoing shipments

• Work according to inventory and administrative guidelines. Maintain data integrity of the inventory to maximize product availability

• Perform effectively in the storage of products to the assigned area, using the available systems and tools that support an efficient and accurate process

• Contribute daily to the agreed goals of the action plan, as well as being involved in the goal setting process

• Contribute to an optimized daily workflow operation within the assigned processes by working in a lean, simple, and cost-conscious way, using and sharing good examples

• Follow quality, security and safety service standards and comply with procedures, rules, and regulations.

• Contribute to optimize the operations in the warehouse

• Work alongside with colleagues in the department and other areas of the organization

• May be required to operate pallet jack to move heavy products

• Execute any other duties & responsibilities which the


• Saturday: 7am to 11am





management / superior may assign from time to time


#9 Katoen Natie With a rich company history spanning over 150 years, the Katoen Natie Group brings innovation to the fore

with a wide range of unique solutions for the chemical industry in a global network of 68 terminals,

including our Singapore Jurong Logistics Terminal.



• At least secondary school education

• ISO Requirements experience

• Exposure of working in a cleanroom environment

• Able to speak and write in English

• Demonstrated team player skill to accomplish the daily production objectives

• Proven ability to understand work instructions

• Assembly of product with specific written instructions, blueprints and drawings.

• Participate in PPI (Practical Process Improvements), Lean and Continuous Improvement activities including 5S activities.

• Maintain ISO13485 and cGMP documentation practices to ensure conformity. Maintain and upkeep the housekeeping and safety standards in the workplace.

• Work with Supervisor and Engineers to ensure that quality, waste and efficiency are meeting requirements.

• Execute improvement activities on quality and work process efficiency.

• 7 am to 4.15pm at Joo Koon Circle


• At least Diploma education qualification

• ISO Requirements experience

• Exposure of working in a cleanroom environment

• Able to speak and write in English

• Demonstrated team player skill to accomplish the daily production objectives

• Proven ability to understand work instructions

• Assembly of product with specific written instructions, blueprints and drawings.

• Participate in PPI (Practical Process Improvements), Lean and Continuous Improvement activities including 5S activities.

• Maintain ISO13485 and cGMP documentation practices to ensure conformity. Maintain and upkeep the housekeeping and safety standards in the workplace.

• Work with Supervisor and Engineers to ensure that quality, waste and efficiency are meeting requirements.

• Execute improvement activities on quality and work process efficiency.

• 7 am to 4.15pm at Joo Koon Circle

QC Technician • Diploma education in related science would be preferred

• Minimum 2 years QC experience in clean room environment, preferably in semiconductor /

• Perform in process quality control testing on incoming raw materials to ensure compliance with required quality specifications, particularly with ISO 13485:2003 and 21- CFR – 820.

• Perform troubleshooting or Special Testing Request as instructed by

• 8 am to 5.15pm

• Day shift At Gul Circle



pharmaceutical / biotech industries.

• Good problem-solving, communication and interpersonal skill

• Good eye sight, no color-blindness

• Meticulous and high initiative

• Skilled in identifying in-coming material quality checks

supervisor to identify root cause of QC assignable cause and QC failure.

• Perform IPQC testing in compliance with all quality and department procedures.

QC Technician II • NITEC/Higher NITEC in related science would be preferred

• Minimum 2 years QC experience in clean room environment, preferably in semiconductor / pharmaceutical / biotech industries.

• Good problem-solving, communication and interpersonal skill

• Good eye sight, no color-blindness

• Meticulous and high initiative

• Skilled in identifying in-coming material quality checks

• Perform quality control testing on gene chips to ensure compliance with required quality specifications, particularly with ISO 13485:2003 and 21- CFR – 820.

• Ensure accurate recording and reporting of test results to facilitate product release.

• Prepare test reagents/buffers according to released procedures.

• Perform troubleshooting as instructed by supervisor to identify root cause of QC failures.

• Maintain laboratory equipment per established schedule and procedures.

• Assist Chemist in validation testing as per approved protocol.

• Observe good house keeping and safe work practices.

• Ensure compliance to all quality and department procedures

• 8 am to 5.15pm

• Day shift At Gul Circle


#10 LF Logistics Services LF Logistics is the supply chain partner of choice for companies looking to sustainably grow in Asia. Our

network spanning Greater China, ASEAN, Japan, Korea, the Middle East, and Indian subcontinent provides us

with a strong “home court advantage” in this culturally diverse and economically active region. We care

about our people and environment. We emphasize safety and sustainable practices at all times. We live up

to the highest compliance, moral, and ethical standards


Logistics Coordinator

• Diploma or Degree in Business Studies / Administration / Management, Logistics / Transportation or equivalent

• At least 1 year of relevant working experience in the logistics industry preferred

• Computer proficiency (MS Office – Word, Excel and Outlook) & Warehouse Management System (WMS) / Exceed System

• Good verbal and written communication skills, including ability to effectively communicate with internal and external customers

• Must be able to work as part of a team in a fast paced and pressured environment

• Positive Attitude and Good Team Player

• Liaise closely with customers and operations team on order fulfillment, inventory & shipment related activities

• Working closely with operations team to provide information / feedbacks to customers on operational issues and co-ordinate with customers to resolve all issues

• Generate KPIs and transactional reports to internal and external customers on a timely basis

• Verify vendor invoices and liaise with vendor for any discrepancies

• Monitor the usage of warehouse supplies and raise POs for replenishment

• Coordinate the urgent order fulfillment with customer, operations and transporter

• Ensure the accuracy and timely update of system transactions

• Perform other required duties or task when assigned

• Maintain compliance with all company policies and procedures

• Any other duties as assigned by manager from time to time

• Day Shift (8.30am to 6.00pm) Bulim

• Night Shift (8.30pm to 8.30am, 4334 pattern) Penjuru

Logistics Coordinator - Regional Control Center

• Degree in Logistics / Shipping / Supply Chain / Warehouse Management and/or Industrial Engineering

• 1 year of relevant working experience in warehouse/logistics/freight forwarding.

• Experience in order customer service, shipping process and documentation.

• Reporting to the Regional Control Center Team Lead, the incumbents will be responsible for the daily planning, communication and coordination of operations across different departments.

• Supervise all movements along the supply chain.

• Monitor day to day order and handle shipment planning via different mode of transportation for Key Customer.

• 8.30am to 6pm (Bulim)



• Strong communication and written skill in English and Mandarin.

• Willing and Fast Learner with good interpersonal skill

• Ability to work in fast pace and dynamic environment

• Ability to think quickly and perform problem solving tasks, even with changing conditions

• Service oriented and a team player

• Competent in MS Word, MS Excel and WMS system

• Liaise with customers via e-mail & telephone for all documentation and administration matters.

• Communicate and coordinate warehouse and shipping related matters with functional department such as IT, Customs Brokerage, Transport and Freight.

• Understand the application of shipping related documents such as FTA Documents, MSDS, etc.

• Understand the application of warehousing management system and importance of linkage with all shipping related matters.

• Ensure Key Performance Indexes are met for all activities.

• Follow up closely with customers on operations issues, discrepancies and damages.

• Follow up closely with internal team on rectifying operations issues, discrepancies and damages, and ensure closure.

• Supervise and ensure export shipments/local orders, including documentation are delivered accurately and on time.

• Monitor warehouse productivities and drive cost control initiatives and order fulfillment

• Identify areas of improvement and establish innovative or adjust existing work procedures and practices.

• Ensure high standard on Safety and process compliances.

• KPI reporting

• Perform other job-related functions as and when assigned by the Team Lead/Manager.

Prime Mover Driver

• With class 4/5 driving license

• Experienced in container trucking & familiar PSA operations

• Able to work on Weekends & Public Holidays

• Drive container truck • 8.30am to 6.00pm (Bulim)

Warehouse Assistants

• Minimum 1 year of experience in

• Pick, pack and scan pack • 8.30am to 6.00pm (Bulim)



warehousing and operating forklift & reach truck & power pallet jack / hand pallet truck

• Physically fit; this job requires to manage heavy products

• Possess a valid forklift license (added advantage)

• Good attendance and good attitude

• Have a safety conscious mindset

• Able to support overtime when required by operations

• Loading and unloading of containers; sorting

• Use RDT scanner to scan pallets

• Ensure inventory accuracy for warehouse

• Weekly/monthly stock count and random stock check

• To support general warehouse operations

• Practice good handling and usage of warehouse equipment and machinery

• Any other duties as assigned by superior from time to time

• 8.30pm to 8.30am (Penjuru / Bulim)


#11 SG Sagawa Ameroid Sagawa Express Singapore Pte Ltd was first established in Singapore in July 1998 providing International Air

and Sea freight total logistics services. We aim to develop Sagawa Express into an enterprise whereby it is

the first choice for all people, including customers, employees and other members of society. With this in

mind, all employees will proudly fulfil their roles in developing our business by giving priority to fulfilling our

corporate social responsibility, establishing firm bedrock for our business operations and determining the

scope of our businesses.


Class 3 Delivery Driver

• Minimum primary school

• Min 1-2 years experiences in similar field

• Possess Class 3 Driving License

• Able to work alone and independently

• Ensure timely collection and delivery of cargoes

• Able to work Overtime when necessary

• Maintain radio communication always

• Ensure proper documentation eg. Delivery notes, pick up orders, etc

• Report any vehicle or cargo damage due to accident

• Report any cargo discrepancy during course of work

• Adhere to safety requirements while on the job

• To perform any other tasks assigned

• 5 Days

• Mon – Fri: 0700 – 1648

• West

Customer Service Officer

• At least Diploma / O levels with 1-2 years relevant experience

• Proficient in MS Office, especially Excel

• Excellent interpersonal, communication and presentation skills

• Able to perform in fast-paced environment and meet deadlines

• Possess good analytical skills and team player

• Able to commence work immediately or within short notice

• Experience in Ocean and Air freight preferred

• Able to write and speak fluent Japanese (business level)

• Provide sales support to sales & customer services department

• Preparing of quotation to customers, follow-up on sales enquiries

• Taking and placing of bookings

• Telemarketing to promote company’s services

• Coordinate all import & export shipments with overseas and local agents (in Japanese)

• Preparing of billing to customers

• Liaise with carriers/shipping line, co-leaders for attractive rates

• Liaise with internal and external customers

• Ensuring all data manifest are accurate for all shipments

• Outdoor coordination with Japanese customers when required

• Other administrative and ad-hoc duties

• 5 Days

• Mon – Fri: 0845 – 1715

• West

Prime Mover Driver

• Possess class 4/5 license.

• Min. 3 years experience in Prime Mover Driving experience.

• Familiar with PSA Import/Export/Trucking procedures.

• Ensuring timely collection and delivery of cargoes.

• Ensuring accuracy on job performance.

• Ensuring proper documentation eg. Delivery noes, pick up orders etc.

• 5.5 days

• Mon – Fri: 0800 – 1700

• Sat: 0800 – 1200

• Changi



• Familiar with Container Yard operations.

• Ensuring fully compliance for PSA Import/Export/Trucking procedures and Workplace Safety & Health requirements.

• Reporting to traffic control team.

• Maintain radio communication always.

• Timely arrival for delivery of import cargoes.

• Timely arrival for collection of export cargoes.

• To check and confirm the documentation eg. Delivery notes, pick up orders etc.

• Endorsing of permits at customs checkpoint

• Vehicle Maintenance and housekeeping

• Report any vehicle or cargo damage due to accident

• Check, tally and proper handling of cargoes

• Proper handling of company assets and equipment

• Report any cargo discrepancy during course of work

• Adhere to safety requirements while on the job

• Any other duties as per assigned by superior

Prime Mover Driver (Changi)

• Minimum primary school

• Minimum 3 years experiences in similar field

• Valid Class 4 Driving License

• Able to work alone and independently

• Willing to work long hours

• Ensure timely collection and delivery of import/export cargoes

• Maintain radio communication always

• Endorsing of permits at customs checkpoint

• Vehicle Maintenance and housekeeping

• Report any cargo discrepancy immediately

• 5 days

• 0700 – 1648

• Changi

Warehouse Assistant

• Secondary School

• Willing to do hands-on

• Knowledge or experience in Warehouse will be advantageous

• Ensuring accuracy on job performance

• Ensure fully compliance on workplace safety & health procedure

• 5.5 Days

• Mon – Fri: 0845 – 1715

• Sat: 0845 – 1200

• West



• Possess the willingness to learn

• With forklift license is an added advantage

• Own initiative for improvement/enhancement

• Lift heavy objects on a regular basis

• Candidates with no experience are welcome to apply

• PC Literate, knowledge in MS Excel

• Ensure completing the task or duties assigned with accuracy & in order

• Ensure the following procedure as taught by the superior

• Work with team to manage daily logistics operations

• Ensure error-free shipment to customers

• Liaise and coordinate with various parties on logistics issues

• Arrange all goods according to the shipment schedule, data entry and prepare documentation (i.e. checklist, tally sheet & etc.)

• Performs physical tasks involved checking quality of incoming goods, products receiving, picking & packing and container’s stuffing for shipments

• Management simple warehouse inventory

Warehouse Assistant

• Secondary School

• Preferably 1-2 years of relevant experience in warehouse / 3PL administration

• Possess good organizational interpersonal & communication skills

• Candidates without experience are welcome to apply

• Proficient in computer skills

• Provide administrative support to warehouse and coordination with customer for daily order fulfilment

• Perform inventory receive and inspect all materials to tally against shipping documents

• Perform date entry support and regular billing updates

• Maintain proper documentation and filing of all inventory records

• Ensure accuracy of inventory balances and movements, performing inventory counts and reconciliations as needed

• Perform other related duties as assigned from time to time

• No Aircon working environment

• 5 days

• Mon – Fri: 0830 – 1800

• West


#12 SMRT Buses / SMRT Trains

SMRT Buses SMRT Buses, a subsidiary of SMRT Corporation, is a public bus service operator in Singapore. Anchored on

our core competencies in operations, maintenance and training bus professionals, we operate bus services

and manage bus depots and interchanges.


Bus Captain • At least 1 year driving experience

• Class 3/3A/4/5 holders welcomed to join us

• Safe driving track record

• Ensure compliance

• Workplace Safety

• Provide a safe, smooth and comfortable bus journey for all our passengers

• Adhere to allocated driving schedule and timing

• Ensure compliance to company's stipulated operational standards and procedures

• Perform any other bus driving and related duties that may be assigned from time to time

• Working hours: depend on roster

• Working location: Woodlands/ Choa Chu Kang/ Bukit Panjang

SMRT Trains SMRT Trains Ltd was incorporated in 1987 and operates Singapore’s first mass rapid transit system. Today,

we manage and operate train services on the North-South Line, East-West Line, the Circle Line, the Thomson-

East Coast Line, and the Bukit Panjang Light Rail Transit. With over 5,000 employees, more than 250 trains,

and 141 km of rail tracks across 108 stations, we serve millions of commuters daily.


Assistant Engineer, Civil Structure Engineering

• Diploma in Engineering or Building Services or Equivalent

• Prior experience in maintenance work

• Able to perform shift work, including permanent night shift and working on weekends/public holidays

• Able to communicate effectively and a good team player

• Preferably have a Class 3 driving license.

• Able to communicate effectively, lead a team and work independently.

• Lead a team to perform routine inspections of MRT structures, including stations, depots, viaducts and tunnels

• Lead a team to perform PM and CM works, such as concrete repair, leakage repair, servicing of plumbing systems, scaffolding erections.

• Arrange, coordinate and supervisor outsourced PM work by outsourced contractors

• Attend to faults/complaints and carry out investigation and rectification works Perform role of PIC and PM duties to ensure safety of work parties on MRT tracks

• Record maintenance work both on papers and computer systems (e.g. SAP/Maximo)

• Depends on ROTA

• Location depends on work requirement



Assistant Engineer, Integrated Supervisory Control Systems

• Diploma in Electrical or Electronics Engineering from a recognized institution, with at least 2 years relevant working experience.

• Previous Railway System or related qualifications and/or working experience would be advantageous.

• To operate safely and efficiently all Communication and Control Measuring, Test Equipment, Instruments and Tools

• To lead team of Technical Officers in performing tasks in compliance with relevant procedures and instructions contained in Quality Procedures, Work Specifications, Work Instructions and any relevant change instructions disseminated.

• To comply with and exercise safety at all times in accordance to all Safety Procedures.

• To be responsible for the safety of self, peers at workplace; off and on trackside throughout working period.

• To carry-out the role of PIC and PM duties and responsibilities.

• To complete the necessary reports for the task at hand.

• To plan scheduled PM work and perform timely CM.

• To carry out day-to-day monitoring of equipment performance and follow up where appropriate.

• To ensure authorized access to Communication and Control Equipment Rooms and Installation

• To assist EMM in managing and controlling of maintenance spares

• To ensure good housekeeping in the workplace

• Shift hours

• Island-Wide (TEL Depot/ Stations)

Assistant Engineer, Permanent Way Engineering Trains Branch

• Diploma in Engineering

• Preferably have a Class 3 driving license.

• Able to communicate effectively, lead a team and work independently.

• To assist supervisors on fault finding (Electrical Circuit and Programmable Logic Control) and incident investigation, ensure proper documentation is in line with the ISO 9000 and 14001.

• To audit on the work done by your technical officers, adjudication of RFQ, monitor and ensure adequate spares for maintaining and repair of locomotives under your charge.

• To assist in modification and upgrading work on locomotives and specialist track-borne maintenance vehicles, fleet wide inspection or component replacement.

• Depends on ROTA




• To carry out duty of driving the locomotive for daily maintenance works.

• To carry out any duty as and when assigned by the supervisor.

• To perform 3 rotating shift work and permanent night shift if required.

Assistant Engineer, Power

• Diploma in Electrical Engineering from a recognized institution.

• Candidates with 2 to 3 years of relevant work experience in maintenance and troubleshooting of electrical equipment will have an added advantage.

• Self-motivated, resourceful and organized


• Able to lead by example

• Possess strong interpersonal & communication skills

• Experienced and is confident in managing contractor.

• To lead a team of technical officers to carry out and/or supervise for preventive and corrective maintenance works on SMRT power system in compliance with relevant procedures and safety requirement.

• To plan and execute maintenance schedule and staff duty rosters in consultation with Engineering Maintenance Manager (EMM) in most effective and efficient manner.

• To provide technical advice, information and instructions to other staff and ensure all drawings, diagrams, manuals and records are kept current and update.

• To assist EMM in conducting engineering and safety analysis, investigations, and test.

• Carry out and/or assist EMM supervision of corrective maintenance, upgrading, modification work and major repair work as assigned by EMM/ Section Manager. Prepare and submit reports on completion of work.

• To comply and exercise safety at all times in accordance to Safety Procedures.

• To attend Permit-to-work for all internal and external work parties.

• To perform driving duty.

• To conduct home-based safety talk and compile monthly Overtime report.

• To ensure compliance with our Quality objective as stated in our Quality Procedures/ Work Instructions / Tasklists in daily activities.

• Shift hours




• To undertake any other tasks or functions that are incidental or ancillary to the performance of assigned work.

Assistant Engineer, Power Maintenance

• Diploma in Engineering

• Able to lead by example, communicate effectively and work as a team.

• Physically fit, able to climb staircases and ladders, and stand for sufficient duration (4 hours) to accomplish the required fault assessment or inspection works.

• Lift tools and equipment of up to 5kg

• Lead a team of technical officers to carry out and/or supervise for preventive and corrective maintenance works on SMRT power system equipment in compliance with relevant procedures and safety requirements.

• Plan and execute maintenance schedule and staff duty rosters in consultation with EMM in most effective and efficient manner.

• Provide technical advice, information and instructions to other staff and ensure all drawings, diagrams, manuals, and records are kept current and updated.

• Assist EMM in conducting engineering and safety analysis, investigations, and test.

• Carry out and/or assist EMM in supervision of corrective maintenance, upgrading/ modification/ repair work and submit reports on completion of work.


• To attend Permit-To-Work / Permit-To-Access for internal and external work parties.

• To perform rotating shift duties.

• Ensure compliance with our Quality objectives as stated in our QP/WIs/Task lists in daily activities.

• Undertake any other tasks or functions that are incidental or ancillary to the performance of assigned work.

• Depends on ROTA


Assistant Engineer, Rolling Stock

• Diploma in Electrical, Mechanical or Mechatronics Technology / Engineering from a recognized institution.

• Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on

• Shift hours




• Preferably 5 year’s relevant experience in the railway environment.

• Personal Leadership: Be accountable to one’s action and manage oneself professionally,

• Excellence: Deliver quality results without compromising on safety, procedures and processes,

• Collaboration: Work effectively within a team to accomplish key objectives

• Learning: Be willing and take initiative to continually learn and upgrade oneself.

all rolling stocks, depot and workshop equipment.

• Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

• Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

• Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

• Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

• Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System.

• Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

• Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

• Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

• To support the group during incidents, accidents and emergencies.

Assistant Engineer, S&C

• Diploma in Electrical Engineering, Electronics Engineering, or equivalent

• Supervises the team in performing preventive and corrective maintenance work on various railway signalling systems and platform screen doors.

• Depends on ROTA




• Preferably 5 years’ experience as team leader in a fast-paced maintenance environment

• Data and Statistical Analytics

• Equipment Maintenance and Housekeeping

• Network Systems Maintenance

• Rail Regulatory Compliance

• Signal Interlocking Systems Maintenance

• Signalling Auxiliary Device and Equipment Maintenance

• Trackside Automatic Train Control Equipment Maintenance

• Contributes to workflow improvements to enhance the reliability signalling system, as well as supervising and ensuring the work quality and safety of external contractors and stakeholders.

• Maybe required to perform shift duties at various rail premises such as depots, train stations, viaduct, and tunnels.

• Demonstrates team leadership skills in ensuring the team carries out the maintenance work in a safe and orderly manner, as well as manages the team’s performance in achieving established Key Performance Indicators.

• To lead team of Technical Officers in performing tasks in compliance with relevant procedures and instructions contained in Quality Procedures, Work Specifications, Work Instructions, and Signal Standing Instructions

• To assist in supervising and coaching of new staff and conducting on the job training

• To provide 1st line fault response and recovery

• To perform timely trackside CM activities including fault troubleshooting, rectification and testing

• To plan and carried out trackside PM work according to schedule

• To perform trackside equipment overhaul activities and to ensure that the programs adhere to the schedule

• To carry out day-to-day monitoring of equipment performance and follow up

• To carry out day-to-day fault analysis and follow up

• To perform tasks in compliance with relevant procedures and instructions contained in Quality Procedures, Work Specifications, Work Instructions, Signal Standing Instructions and any relevant change instructions disseminated



• To operate safely and efficiently all Signal Measuring, Test Equipment, Instruments and Tools

• To comply with and exercise safety at all times in accordance to all Safety Procedures.

• To be responsible for the safety of self, peers at workplace; off and on trackside throughout working period

• To carry-out the role of PIC and PM duties and responsibilities

• To complete the necessary reports for the task at hand

• To assist EMM in managing and controlling of maintenance spares

• To ensure good housekeeping at the workplace

Assistant Engineer, Signal & Platform Screen Door

• Diploma in Electrical or Electronics Engineering discipline

• Relevant experience in maintenance and troubleshooting of electrical equipment.

• Operate safely and efficiently all Signal Measuring, Test Equipment, Instruments and Tools

• Perform tasks in compliance with relevant procedures and instructions contained in Quality Procedures, Work Specifications, Work Instructions, Signal Standing Instructions, and any relevant change instructions disseminated.

• Comply with and exercise safety at all times in accordance with all Safety Procedures.

• Responsible for the safety of self, peers at workplace; off and on trackside throughout working period.

• Carry out the role of PIC and perform Preventive maintenance (PM) duties and responsibilities.

• Perform timely Corrective maintenance (CM) duties and responsibilities.

• Complete the necessary reports for the task at hand.

• To assist Engineering Maintenance Manager (EMM) in planning scheduled PM work and perform timely CM.

• Carry out day-to-day monitoring of equipment performance and follow up where appropriate.





• Ensure authorized access to Signal Equipment Rooms and Installation

• Ensure good housekeeping in workplace

• To carry out any duty as assigned and directed by EMM

Assistant Station Manager

• NITEC / Higher NITEC in Engineering discipline.

• Experience in customer service is preferred.

• Monitors and performs first level of maintenance for AFC equipment such as fare gates and ticketing machines.

• Operates or man the train so as to provide quick response towards train faults and alarms, while ensuring that any delays are kept to the minimal.

• Assists passengers in fare-related enquiries such as purchasing of tickets, ticketing problems, giving direction, enquiries on fares, etc.

• Manages and reports all incidents and emergency situations relating to: a. Staff and passenger (e.g. accident, assault, molest, etc.) b. Trains (e.g. alarms, faults and manning of trains) c. Passenger Service Centre (take local control of MFT functions due to failure of signalling equipment, responding to alarms/defects), d. Stations (e.g. crowd control, fire, bomb hoax, flooding, etc.)

• Shift hours

• Island-Wide (TEL Stations)

Deputy Engineering Maintenance Manager, Rolling Stock

• Minimum Diploma in Mechanical Engineering from a recognized institution.

• Minimum 5 years of relevant experience in the railway environment.

• Be self-motivated, resourceful and organized, possess strong interpersonal & communication skills, able to communicate effectively and ability to work in and as a team.

• Coordinate works carried out by contractors for TEL Rolling Stock (RS) trains modifications as well as facilitate Rolling Stock (RS) trains testing & commissioning.

• Coordinate work carried out by contractors for TEL Rolling Stock(RS) trains (Investigation of train faults, Light/Heavy Cleaning, Media Contractor).

• Management of TEL Rolling Stock (RS) trains fleet wide inspections/checks as when required.

• Management of teams for Preventive Maintenance (PM) and Corrective Maintenance (CM) activities, including outside office hours.

• Shift hours




Rail Service Manager, Train Ops

• Degree in Engineering or Diploma in Engineering with relevant experience

• Ability to handle emergency situations in a calm and swift manner.

• Good spoken and written English is important for investigation and report writing.

• Responsible for the performance monitoring of the Train Captains and assist in the management of Train Operations in accordance with the rules, procedures, and guidelines.

• During incidents and emergencies, you will respond, conduct investigation, and submit Safety Incident System (SIS) report. Investigate passenger’s complaints and feedbacks, conduct regular checks on personnel protective equipment and Station Manager processing of Track Occupation Authorisation (TOA).

• Conduct counselling sessions, refresher drills and briefings on Operations Procedures and Work instructions.

• Attend to visitors/ contractors/ special groups of travellers visiting the station.

• Manage Train Captains’ duty schedule and roster changes.

• Conduct oil spill checks at terminal stations.

• Required to work on 3 rotating shifts.

• Depends on ROTA


Technical Officer, Civil Structure Engineering

• Nitec/Higher Nitec in Engineering or Building services

• Prior experience in maintenance work

• Able to perform shift work, including permanent night shift and working on weekends/public holidays

• Able to communicate effectively and a good team player

• Prior experience in building maintenance is preferred

• Perform routine inspections of MRT structures, including stations, depots, viaducts and tunnels

• Perform PM and CM works, such as concrete repair, leakage repair, servicing of plumbing systems, scaffolding erections.

• Attend to faults/complaints and carry out investigation and rectification works

• Perform role of PIC and PM duties to ensure safety of work parties on MRT tracks

• Rotating Shift


Technical Officer, Communication

• NITEC in an Electrical or Electronics Engineering discipline.

• Responsible to perform Preventive &

• To perform maintenance work on Circle Line Communication systems, such as Radio, CCTV, Public Address, Telephony, Traveller Information System, etc.

• 3 rotating shift




Corrective Maintenance of Circle Line’s Communication systems, such as Radio, CCTV, Public Address, Telephony, Traveler Information System.

• To perform the day-to-day 1st line maintenance activities of the COM systems equipment located in Station (CER and PSC) and OCC (CER & Control room).

• To perform Preventive and Corrective Maintenance and record all activities.

• To provide maintenance support to other department in fault- finding or inspection.

• To assist in the supervision/ witnessing of works/ testing carried by LTA/SMRT contractors.

• To carry out any duty as assigned and directed by Assistant Engineer.

Technical Officer, Electrical, Mechanical & Fire

• At least a NITEC/Higher NITEC in Engineering, Electrical & Mechanical preferred

• Minimum 6 years of relevant working experience in the operations and maintenance of Electrical, Mechanical and Fire (EMF) system.

• Class 3 driving license as driving company vehicle may be required.

• Able to work 3 rotating shift

• Able to carry heavy tools and equipment and work on ladder/scaffolding (Work at Height)

• M&E Background

• Perform PM/CM and overhaul maintenance in Station / Tunnel / Depot Drainage Pump System / Lighting System / Depot Fire Alarm / Fire Protection and EMF System.

• Carry out Fault Attendance and Rectification

• Assist supervisor to carry out accident and incident investigation

• Take the lead role in troubleshooting the equipment

• PIC to supervise the installation of repair work carried out by contractor and ensure that the work carried out meets the expected standards and quality

• Assist the Assistant Engineer in execution and supervision of planned works

• Assist the Assistant Engineer to send the Inspection, Test and Measuring Equipment (ITME) due for calibration to be calibrated

• Assist Audit clarification and inspection for both external and internal parties

• Maintain and dispose material inventory

• Assist to close maintenance work orders

• Handle Permit-To-Work for internal customers

• Rotating Shift


Technical Officer, Escalator & Lift

• Nitec/Higher Nitec

• 3 to 5 years of experience in

• Work Safely and highlight unsafe acts, behaviours, and potential hazards in the midst of the work.

• Normal/Rotating Shift, depending on ROTA



maintenance of electrical/mechanical machinery/ equipment, preferably in lift/escalator industry

• Able to work in fast-paced environment with changing priorities

• Able to read simple electrical circuitry and engineering drawing

• Willing to work 3 rotating shift/permanent night shift

• Prior experience in lift industry and M&E background is preferred

• Perform quality PM/CM works on Escalators & Lifts in accordance to department’s Quality Procedures, Work Instructions and Risk Assessments.

• Expeditiously respond to fault when activated.

• Assist in site investigation and testing.

• Troubleshoot technical faults together with team.

• Perform SPIC duties to provide supervision to the contractors in company premises.

• To carry out the role of PIC and PM duties and responsibilities, and rectify fault to recover equipment in shortest possible time


Technical Officer, Permanent Way Engineering Trains Branch

• NITEC/Higher NITEC in Engineering

• Proficient in MS Office and preferably have a Class 3 driving license.

• Able to communicate effectively and work in a team environment.

• To shunt locomotives for daily maintenance works.

• To assist supervisors on trouble shooting and incident investigation, ensuring proper work procedures and documentation.

• To carry out any duty as and when assigned by the supervisor.

• To perform 3 rotating shift work and permanent night shift if required.

• Depends on ROTA


Technical Officer, Permanent Way Line Maintenance


• Have at least 3 years of working experience in trackwork maintenance preferable.

• Able to communicate effectively and good team player.

• Carry out Planned Preventive Maintenance as well as Corrective Maintenance to track, track foundation and 3rd rail system in SMRT.

• Execute and comply all PM & CM works with the approved quality procedure & Work Instruction.

• To comply and execute tasks in accordance to Work Instructions and Procedures


• To be responsible for the safety of self, peers and the track throughout the working period.

• Depends on ROTA




• To carry-out the role of PIC and PM duties and responsibilities.

• To attend emergency work as and when assigned by Supervisor.

• To perform Hand Signalman and Look-out man.

• To log in man-hour completed, close & teco Maintenance Order after daily work done.

• To submit work record after work completion.

• Zone 3 I/C- deputies in the absence of 2I/C in task & manpower detailing.

• To keep records and update of store spares including critical items.

• Ensure good housekeeping at office and store.

• To carry out project implementation as and when assigned by supervisor.

Technical Officer, Permanent Way Track Renewal


• Able to communicate effectively and a good team player.

• Proficient in using tools and equipment.

• Operate an engineering consist (include locomotives), safely and efficiently.

• Comply and execute tasks in accordance to Work Instructions and Procedures.

• Comply and exercise safety at all times in accordance to Safety Procedures.

• Responsible for the safety of self, peers and the track throughout the working period.

• Carry-out the role of person-in-charge (PIC) and preventive maintenance (PM) duties and responsibilities.

• Complete the necessary paper works for the task at hand.

• Complete rail change or built-up welding works within a given time frame.

• Perform thermit welding.

• Plan for Track Renewal weekly schedule.

• Depends on ROTA


Technical Officer, Power Maintenance


• Able to communicate effectively and work as a team.

• To carry out and assist AE/SAE/EMM in preventive maintenance works on power system in compliance with the

• Depends on ROTA




• Physically fit, able to climb staircases and ladders, and stand for sufficient duration (4 hours) to accomplish the required fault assessment or inspection works.

• Lift tools and equipment of up to 5kg

relevant procedures and safety requirements.

• To carry out and assist AE/SAE/EMM in corrective maintenance, upgrading, modification, repair works and submit reports on completion of work.

• To perform general housekeeping, collection and delivery of stores, spares and equipment for PM and CM work.

• To carry out monthly update of home base equipment & tools.

• To comply the safety requirements of Task lists/WI/WSM and other associated procedures.

• To attend Permit-To-Work / Permit-To-Access for internal and external work parties.

• To perform rotating shift duties.

• To perform driving.

• Ensure compliance with our Quality objectives as stated in our QP/WIs/Task lists in daily activities.

• Undertake any other tasks or functions that are incidental or ancillary to the performance of assigned work.

Technical Officer, Rolling Stock

• NITEC / Higher NITEC in Electrical Engineering, Mechanical, Mechatronics or Automotive Engineering / Technology from a recognized institution.

• Preferably 2 to 3 years relevant experience in operating and maintenance of electro-mechanical equipment.

• Personal Leadership: Be accountable to one’s action and manage oneself professionally

• Excellence: Deliver quality results without

• Perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

• Execute tasks in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

• Ensure tools and equipment used are calibrated and in good condition.

• Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

• Shift hours




compromising on safety, procedures and processes

• Collaboration: Work effectively within a team to accomplish key objectives

• Learning: Be willing and take initiative to continually learn and upgrade oneself.

• Ensure work records are updated factually, accurately, and timely on Work Records Form and on the Maintenance Management System.

• Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

• Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

• Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks. To support the group during incidents, accidents, and emergencies

Technical Officer, S&C

• NITEC/ Higher NITEC in Electrical/Electronic/Railway related field - related experience is preferred.

• Experienced in maintaining a variety of COM equipment, such as CCTV, PA, EPAX/IPAX and Digital-Trunked Radio Network

• Effective written and oral communication skills

• Ability to prioritize tasks and follow specified procedures in work instructions

• Carry out preventive and corrective maintenance

• Understanding of spare management

• Good time-management skills

• Critical thinker and problem-solving skills

• Team player

• Responsible for carrying out maintenance work on the communication systems, contributing to the safe and reliable operation of the Railway.

• To perform the testing, diagnosis maintenance and repair of COM equipment such as Public Address, CCTV, Telephone Systems, Epax/Ipax Networks, SDH Communication Backbone Network and Digital-Trunked Radio Network, Train-borne equipment.

• To perform PM and COM works and tests, record all faults reported and complete work orders within specified times.

• To carry out general housekeeping, safety and security of the COM equipment room at the stations, the home office areas at all times.

• To supervise works carried by LTA/SMRT contractors.

• To respond to occasional recall after duty hours or for overtime work.

• To carry out any duty as assigned and directed by Assistant Engineer.

• Depends on ROTA




• Great interpersonal and communication skills

Train Captain, Train Ops

• NITEC or Higher NITEC in an Engineering discipline.

• Possess a friendly and customer-oriented personality and be fluently conversant in English.

• Possess an inquiring mind.

• A team player.

• Able to handle stress well

• Able to work independently and analyse train faults systematically in order to make a sound and safe decision while operating the train.

• Understand the train system functions and have an in-depth knowledge of the train technicalities to follow up on train technical investigations

• Successful candidates will undergo a structured training program which requires short attachments to other Departments such as Station and Control Operations departments. This is to ensure that they equipped with the necessary knowledge and skills to perform the duty of a Train Captain and/or Train Captain’s Trainer.

• Depends on ROTA


Train Service Controller, Control Ops

• Diploma in Engineering or equivalent

• Good inter-personal and communication skills and able to work independently as well as in a team environment with individuals of diverse backgrounds.

• Must be highly motivated and work under pressure and handle stress.

• Able to think strategically and analyses systematically to make sound and safe decisions.

• Regulating train service in an efficient and safe manner.

• Liaison duty in ensuring information flow and Communication are executed promptly and accurately including fault reporting and processing of track access activities.

• Communication duty in ensuring delay and disruption information are disseminated to all stakeholders promptly and accurately.

• Able to work on 3 rotating shifts, including duties on weekends and on public holidays.

• Depends on ROTA

• East


Upcoming Events

Get updated to the latest job opportunities (community or

industry job fairs, etc.) or training workshops.

For the latest update and registration for events, visit

https://e2i.com.sg/events

https://e2i.com.sg/events


Meet an e2i Career Coach

For jobseekers who need to speak to a career coach for career

advisory and support, they can make an appointment online to meet

up with an e2i coach for one-to-one coaching.

https://e2i.com.sg/app

Concerned about your Job Security in this period?

In this critical period, we wish to help all workers to tighten their job security. We

have compiled a list of resources for you to widen your search, sharpen your skills,

and receive funding support.

You can also reach them at the following centres (By appointment only):

Operating Hours

Monday till Friday: 9am to 5pm Saturday: 9am to 1pm

Sunday & Public Holiday: Closed

e2i west Devan Nair Institute of Employment and Employability

80 Jurong East St 21 Level 2 Singapore 609607

e2i central HDB Hub Bizthree 490 Lorong 6 Toa Payoh #07-11 (Lift Lobby 1) Singapore 310490

https://e2i.com.sg/app

JOB LISTING BOOKLET

www.e2i.com.sg

53

NTUC Job Security Council’s Telegram Channels

Be alerted daily on the latest job vacancies from hiring companies.

➢ Subscribe to Non-PMET Jobs-Alert (e.g. Temporary, part-

time jobs, operators, packer roles)

https://bit.ly/jsc-ja-nonpmet

➢ Subscribe to PMET Jobs-Alert (e.g. Analysts, Engineers,

Executives, Technicians, etc.)

https://bit.ly/jsc-ja-pmet

https://bit.ly/jsc-ja-nonpmet

https://bit.ly/jsc-ja-pmet