series rtc rodless cylinders pneumatic … · 6 aventics series rtc rodless cylinders rodless...

SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE

Series RTC Rodless CylinderPneumatic automation building blockSeries RTC (Rodless Thrust Cylinder)-High performance shuttle type rodless cylinders

The Series RTC is the latest generation of rodless cylinders from AVENTICS, building on years of experience with rodless cylinder design. The economical RTC features a robust, virtually leak-free design with high speed capability. Offering inch and metric options in four versions, RTC's can be custom configured online. The guided versions are Easy-2-Combine capable when used with a connection kit to combine with other standard actuators to build modular automation systems.

Shuttle and piston body in one piece: Robust design—integrated for high strength and long life

Sensor magnet standard Easy maintenance

Sturdy, compact profile: Strong, yet light-weight aluminum Smaller profile than RexMover™

Ideal Cushioning: Adjustable pneumatic end-cushioning Impact bumpers reduce noise and absorb residual impact energy

Series RTC-BV Basic Version shown- Four main versions available: RTC-BV Basic Version RTC-CG Compact Guide RTC-HD Heavy Duty RTC-CKP Twin Guides

(Guided versions are Easy-2-Combine capable with connection kit)

T-grooves for mounting: Easy installation of cylinders using two styles of foot mounts, or choose end cover mounts

High speed: Speeds up to 21 feet per second

How to Order: Our online configurator allows you to design custom cylinders while preventing the selection of impossible configurations. Provides part number and CAD drawing immediately.

Go to: www.aventics.com/us and select "Configurators"

Oval-shaped piston: Low height saves space Greater resistance to side load

Sealing bands: Stainless steel reinforced polyure-thane inner sealing band, unique shape makes cylinder more air tight than other brands

Magnetically coupled outer band protects against dust, etc.

Virtually leak-free design

Sensor grooves (2) visible from 3 sides: ST4 sensors mechanically protected Internal groove provides cable channel

Choice of air connections: On the side at both ends Or one end cover allows dual porting—without pressure drop

NPT or ISO-G (BSPP) ports

Many versions of RTC cylinders are available on our Quick Ship Focused delivery program, visit:www.aventics.com/us/QuickShipRTC

Series RTC Rodless Cylinders AVENTICS 3

RTC-BV Basic Version Used at low and medium torques. Available in bore sizes 5/8” to 3” (16mm to 80mm).

RTC-CG Compact Guide Used where high precision is required. Available in bore sizes 5/8” to 1-1/2” (16mm to 40mm). Uses Bosch Rexroth Linear miniature ball rail systems for all bores sizes except the largest, which uses the standard ball rail system.

RTC-HD Heavy Duty Used with high loads and torques (Heavy Duty) where

extra high precision is required. Available in bore sizes 5/8” to 2-1/2” (16 to 63mm). Uses Bosch Rexroth Linear standard ball rail system with steel guide.

RTC - CKP Twin GuidesUses same steel guide rail as heavy-duty version, but has two guides. Available in bore sizes 16 to 32mm with metric ports and threads.

Note: Guided versions are Easy-2-Combine capable when used with connection kit.

Also available from Internet Configurator: RTC-RR Replacement Series RMC Basic VersionRTC-SB Replacement Series RMC 277-3 Slide Bearing Version (metric only) These are used only to replace a Series RMC (RexMover) cylinder. Not to be used for new design. Similar to RTC-BV but supplied with mounting hardware to provide the same hole mounting pattern and shuttle height as the RMC. Available in bore sizes 5/8” to 3” and 16 to 80mm. RTC-RI Replacement Series 170 Used only to replace a Series 170 cylinder. Not to be used for new design. Similar to RTC-BV but supplied with mounting hardware to provide the same hole mounting pattern and shuttle height as Series 170. Available in bore sizes 5/8” to 3” and 16 to 80mm.

Series RTC Model Code:

4 AVENTICS Series RTC Rodless Cylinders

Rodless cylinders ► IndexSeries RTC

Metric version

Rodless cylinder, Series RTC-BV► Ø 16 - 80 mm ► Ports: M7 - G 3/8 ► double-acting ► with magnetic piston ► integrated guide ► Basic Version ► cushioning: pneumatically, adjustable

24

Rodless cylinder, Series RTC-CG► Ø 16 - 40 mm ► Ports: M7 - G 1/4 ► double-acting ► with magnetic piston ► ball rail guide ► Compact Guide ► cushioning: pneumatically, adjustable ► Easy‒2‒Combine-capable with connection kit

29

Rodless cylinder, Series RTC-HD► Ø 16 - 63 mm ► Ports: M7 - G 3/8 ► double-acting ► with magnetic piston ► ball rail guide ► Heavy Duty ► cushioning: pneumatically, adjustable ► Easy‒2‒Combine-capable with connection kit

34

Inch version

Rodless cylinder, RTC-BV► Ø 16 - 80 mm ► Compressed air connections 10-32 UNF - 3/8 NPTF ► double-acting ► with magnetic piston ► integrated guide ► Basic Version ► cushioning: pneumatically, adjustable

7

Rodless cylinder, Series RTC-CG► Ø 16 - 40 mm ► Compressed air connections 10-32 UNF - 1/4 NPTF ► double-acting ► with magnetic piston ► ball rail guide ► Compact Guide ► cushioning: pneumatically, adjustable ► Easy‒2‒Combine-capable with connection kit

12

Rodless cylinder, Series RTC-HD► Ø 16 - 63 mm ► Compressed air connections 10-32 UNF - 3/8 NPTF ► double-acting ► with magnetic piston ► ball rail guide ► Heavy Duty ► cushioning: pneumatically, adjustable ► Easy‒2‒Combine-capable with connection kit

17

Accessories

Intermediate stop kit

Kit for intermediate-stop adjustment► for RTC-CG, RTC-HD 44

Cylinder mountings

End cover mounting, MF1► for Series RTC-BV, RTC-CG, RTC-HD 47

Rodless cylinder, Series CKP► Ø 16 - 32 mm ► Ports: M7 - G 1/8 ► double-acting ► with magnetic piston ► ball rail guide ► cushioning: pneumatically, adjustable ► Easy‒2‒Combine-capable with connection kit

41



Foot mounting, M41, M48► for Series RTC-BV, RTC-CG, RTC-HD 47

Compensating coupling, S44► for Series RTC-BV 48

End stop

Slide attachment► for RTC-BV 56

Bracket► for RTC-BV 57

Clamping fi xtures► for Series CKP-16, MSC-20, CKP-25, CKP-32, MSC-25 52

Easy‒2‒Combine connection kits

Easy‒2‒Combine, Connection kit► For combination: CKP / CKP 53

Easy‒2‒Combine, Connection kit► For combination: CKP / CKP 54

Centering rings55

Mounts and adustable stop for RTC-SB (formerly 277-3)► End cover mounting M40► Ajustable stop► Foot mounting M41

49



Connecting cable, Series CN2► Socket, Snap-in plug Ø8, 3-pin, with detent ► without wire end ferrule, tin-plated 68

Connecting cable, Series CN2► Socket, M8, 3-pin ► open cable ends, 3-pin 69

T-groove nut► for CKP, GPC, RTC 70

Industrial shock absorber

Kit for shock absorber adjustment for RTC and CKP71

Industrial shock absorbers► Series SA2-RT, for RTC-BV, -CG and –HD► Series SA1-MC, for RTC-SB (formerly 277-3)

72

ST4, Sensor mounting► for Series ST4 ► to mount on cylinder CKP 58

Sensors and sensor mountings, accessories

Sensor, Series ST4► 4 mm groove ► with cable ► open cable ends, 3-pin► 4 mm groove ► with cable ► Plug, M8, 3-pin► 4 mm groove ► with cable ► Plug, M8, 3-pin, with knurled screw► 4 mm groove ► with cable ► Plug, M12, 3-pin, with knurled screw

58

Sensor, Series ST6► 6 mm groove ► with cable ► open cable ends, 3-pin► 6 mm groove ► with cable ► Plug, M8, 3-pin, with knurled screw► 6 mm groove ► with cable ► Plug, M8, 3-pin► 6 mm groove ► with cable ► Plug, M12, 3-pin, with knurled screw

64

Cable holder► to mount on cylinder RTC-SB (formerly 277-3) 70

Sensor mounting► for ST6, to mount on cylinder RTC-SB (formerly 277-3) 70


Rodless cylinders ► Inch Version


00125258

a24

Working pressure min./max. 29 psi / 116 psiAmbient temperature min./max. +14°F / +140°FMedium Compressed airOil content of compressed air 0 mg/m³ - 1 mg/m³Pressure for determining piston forces 91.35 PSI

Materials:Cylinder tube Aluminum, anodizedCovers Aluminum, anodizedSeals PolyurethaneSealing strips Polyurethane; Stainless steelBall rail table Aluminum, anodized

Technical Remarks■ The pressure dew point must be at least 27 °F under ambient and medium temperature and may not exceed 37 °F.■ The delivered product is lubricated for lifetime.■ These pneumatic components with NPT or inch thread dimensions are only available from our US sales organization

Piston Ø [mm] 16 25 32 40 50Piston force [lbf] 28.55 69.46 113.97 178.04 278.08Cushioning length [inch] 0.7874 0.7874 0.7874 0.7874 0.7874Cushioning energy [in.lbs.] 1.11 2.95 5.16 7.38 11.06Speed max. [ft./s] 18.04 21.32 13.12 16.4 9.84Weight 0 mm stroke [lbs] 0.992 1.81 3.06 4.61 7.43

+10 mm stroke [lbs] 0.0308 0.0507 0.0683 0.097 0.1432Stroke max. [inch] 259.84 275.59 389.76 389.76 389.76

Piston Ø [mm] 63 80Piston force [lbf] 441.51 707.22Cushioning length [inch] 0.7874 0.7874Cushioning energy [in.lbs.] 18.44 29.5Speed max. [ft./s] 9.84 9.84Weight 0 mm stroke [lbs] 12.46 21.41

+10 mm stroke [lbs] 0.216 0.3461Stroke max. [inch] 228.34 188.97




Permissible forces Fx, Fy, Fz and torques Mx, My, Mz

00125850

00125255

With simultaneously moments on the cylinder this equation must be used in addition to the maximum moments check. In the cushioning phase of the movement additional forces occur and must be considered. Please use our calculation tool for rodless cylinders at http://www.aventics.com/us

Static

Ø [mm]

Ø [inch]

Fx [N] Fy [N] Fz [N] Mx [Nm] My [Nm] Mz [Nm]

16 5/8 800 150 1100 2 25 825 1 1800 210 3800 6 50 1232 1 1/4 2200 550 6600 18 80 4340 1 1/2 3500 650 8000 28 140 5550 2 5000 750 9000 35 230 7063 2 1/2 6800 850 13000 45 340 9080 3 9500 1000 13000 55 500 110

Dynamic

Ø [mm]

Ø [inch]

Mx [Nm] My [Nm] Mz [Nm]

16 5/8 0.42 10 225 1 1 24 332 1 1/4 3.8 42 1240 1 1/2 6 75 1550 2 9.1 128 2063 2 1/2 14.5 195 2480 3 20 300 28

Max. play and recommended max. lever arm length

00125764

L = lever arm




Ø [mm]

Ø [inch]

α β

16 5/8 0.5° 0.2°25 1 0.5° 0.2°32 1 1/4 0.6° 1.5°40 1 1/2 0.4° 1.0°50 2 0.4° 1.0°63 2 1/2 0.3° 1.0°80 3 0.3° 1.0°

Limit diagram for pneumatic cushioning for horizontal or vertical mounting

00125267

v = Piston velocity [m/s]m = Cushionable mass [kg]The values for the cushionable mass m and piston velocity v must be on or below the graph for the selected piston diameter.

Support span

00125843

Max. support span L [mm] as a function of F [N] at a deflection of 0.5 mm




Dimensions in inchesP

P

PO

FH

SG

E

TG

CU

My

B

PL BU

MCF + S

ZD + S

1.10

MCR

ZZ W5 Wd1RU

WH

PM

Wd2

W4

W3

W2

GR

W1

RX

My

FR

XX

W6

W7

FS

EERT

00125261_inch

S = stroke

Dimensions in inches

Ø[mm]

Ø[inch]

B BU CU E EE FH FR FS GR PL PM

16 5/8 1.34 4.65 1.02 1.42 *10-32 UNF/M7 1.61 2.36 3.94 0.79 0.85 0.3525 1 1.73 5.79 1.02 1.79 1/8 NPTF 1.99 1.57 3.94 0.79 0.79 0.3132 1 1/4 2.28 6.42 1.57 2.03 1/8 NPTF 2.44 2.36 4.72 1.18 0.73 0.3740 1 1/2 2.76 7.17 1.57 2.38 1/4 NPTF 2.8 2.36 4.72 1.18 0.71 0.3950 2 3.62 8.07 1.57 2.66 1/4 NPTF 3.08 2.36 5.51 1.18 0.63 0.6363 2 1/2 4.41 9.17 2.17 3.25 3/8 NPTF 3.67 3.94 7.09 1.57 0.55 0.5580 3 5.51 10.59 2.17 4.07 3/8 NPTF 4.5 3.94 7.09 1.57 0.55 0.55

Ø[mm]

Ø[inch]

PO PP RT 1) RU 2) RX SG TG W1 W2 W3 W4 W5 W6

16 5/8 13,1 0.52 M4 M4 8-36 UNF

0.68 0.75 2.48 1.79 0.31 0.71 1.18 0.53

*Can be selected in the configurator (M7 for high-speed applications), 10-32 UNF is standard.




Ø[mm]

Ø[inch]

PO PP RT 1) RU 2) RX SG TG W1 W2 W3 W4 W5 W6

25 1 21,5 0.85 M5 M4 8-36 UNF

0.68 0.75 2.87 2.19 0.51 0.71 1.18 0.53

32 1 1/4 24,5 0.96 M6 M6 1/4-20 UNC

0.87 1.57 3.66 2.85 0.63 1.02 1.18 0.75

40 1 1/2 31,5 1.24 M6 M6 1/4-20 UNC

0.87 1.57 4.13 3.33 0.87 1.02 1.18 0.75

50 2 35,5 1.4 M8 M6 1/4-20 UNC

0.87 1.57 5.51 4.51 0.43 2.76 1.57 0.87

63 2 1/2 45,5 1.79 M8 M8 1/4-20 UNC

1.18 3.15 6.3 5.3 1.22 1.97 1.57 0.87

80 3 59,5 2.34 M8 M8 1/4-20 UNC

1.18 3.15 7.4 6.4 1.77 1.97 1.57 0.87

Ø[mm]

Ø[inch]

W7 Wd1 Wd2 ZZ WH ZD M [lbs] 3)

16 5/8 0.78 M6 M6 2.68 2.5 7.36 0.1725 1 0.78 M6 M6 2.73 3.44 8.46 0.3532 1 1/4 1.06 M8 M8 3.22 3.54 9.45 0.7140 1 1/2 1.06 M8 M8 3.68 4 10.35 1.0850 2 1.29 M12 M12 4.29 4.61 9.82 1.6163 2 1/2 1.29 M12 M12 5.06 4.59 13.12 2.2980 3 1.29 M12 M12 5.61 5.14 14.21 4.71

1) Thread depth: 0.35 inch for piston Ø 5/8 - 1 1/2, 0.47 inch for piston Ø 5/8 - 32) Thread depth: 0.24 inch for piston Ø 5/8 - 1, 0.40 inch for piston Ø 1 1/4 - 2, 0.59 inch for piston Ø 2 1/2 - 33) M = moving mass




00125259

a24


Materials:Cylinder tube Aluminum, anodizedCovers Aluminum, anodizedSeals PolyurethaneSealing strips Polyurethane; Stainless steelBall rail table Aluminum, anodizedGuide rail Steel, hardened

An example configuration is illustrated. The delivered product may thus deviate from the illustration.

Technical Remarks■ The pressure dew point must be at least 27 °F under ambient and medium temperature and may not exceed 37 °F.■ The delivered product is lubricated for lifetime.■ Use hydraulic shock absorbers for precise end position adjustment.■ These pneumatic components with NPT or inch thread dimensions are only available from our US sales organization

Piston Ø [mm] 16 25 32 40Piston force [lbf] 28.55 69.46 113.97 178.04Cushioning length [inch] 0.7874 0.7874 0.7874 0.7874Cushioning energy [in.lbs.] 1.11 2.95 5.16 7.38Speed max. [ft./s] 6.56 6.56 6.56 6.56Weight 0 mm stroke [lbs] 2.07 3.62 5.36 8.64

+10 mm stroke [lbs] 0.0573 0.0903 0.1234 0.1653Stroke max. [inch] 70.86 70.86 70.86 78.74


Ø [mm] Ø [inch] Fx [N] Fy [N] Fz [N] Mx [Nm]

My [Nm]

Mz [Nm]

16 5/8 744 744 744 4 30 30



25 1 1456 1456 1456 10 78 7832 1 1/4 1840 1840 2646 22 158 11040 1 1/2 1640 1640 4284 36 284 109

Dynamic

Ø [mm] Ø [inch] Mx [Nm]

My [Nm]

Mz [Nm]

16 5/8 4 30 3025 1 10 78 7832 1 1/4 22 158 11040 1 1/2 36 284 109

Recommended values for an expected lifetime of 3200 km


00125851

L = lever arm

Ø [mm] Ø [inch] α β Lx Ly Lz16 5/8 <0,1° <0,2° 328 328 32825 1 <0,1° <0,2° 424 424 42432 1 1/4 <0,1° <0,2° 480 480 48040 1 1/2 <0,1° <0,2° 532 532 532

Static


00125850

00125256






00127080


Support span

00125845






EE1)

MzGS

C

T

RT

FHT1

TG

TT2

TF

BJ

SG

My* *

** **P

KA-A

V1

V2

RWRV

EE1)

V3

PLU2

EE

PM

BUPL

CC MC

ZD + S SL

U3RU

SU PPU

1

PO

A-AHC

GE

HD

GF

RPRGRH

Wd1 Wd2RG

W3

W4

GD W7

W6W5

GA

HB

HA

W1

W2 G

BG

B

00125263

S = strokeT = Type of t-groove nut1) Auxiliary air feedingAn example configuration is illustrated. The delivered product may thus deviate from the illustration.** RTC-CG 16 & 25: 2x Lube ports on each runner blockRTC-CG 32 & 40: Lube nipple of funnel type with thread connection M3





Ø [mm] Ø [inch] B C BU CC EE FH GA GB GD GE GF GS16 5/8 1.97 2.01 4.8 1.1 *10-32/M7 2.13 0.28 0.79 3.68 1.52 4.33 0.4525 1 2.46 2.29 5.79 1.1 1/8 NPTF 2.56 0.24 0.79 4.23 2.11 4.25 0.5932 1 1/4 2.97 2.8 6.69 1.1 1/8 NPTF 2.87 0.65 0.79 4.72 2.36 4.72 0.6940 1 1/2 3.37 2.91 7.32 1.1 1/8 NPTF 3.72 0.65 0.79 5.18 2.82 4.72 0.73

Ø [mm] Ø [inch] HA HB HC HD J MC PK PL PM PN PO PP RG 1)16 5/8 0.3 1.5 2.68 2 0.08 0.47 0.47 0.71 0.28 0.28 0.52 0.29 M525 1 0.2 1.8 1.53 5.4 0.06 0.59 0.4 0.79 0.31 0.35 0.85 0.37 M532 1 1/4 0.5 2 1.72 6 0.06 0.79 0.59 0.73 0.37 0.47 0.96 0.37 M640 1 1/2 0.5 2 2.18 6 0.06 0.67 0.71 0.71 0.39 0.43 1.24 0.41 M6

Ø [mm] Ø [inch] RH 2) RP RT 3) RU 4) SG SL SU T W1 W2 W316 5/8 4xUNC 1/4-20 Ø 9 M5 M5 0.68 1.31 1.52 N4 3.09 2.42 0.9425 1 4xUNC 1/4-20 Ø 9 M5 M6 0.68 1.94 1.85 N6 3.58 2.91 0.1432 1 1/4 4xUNC 1/4-20 Ø 12 M6 M6 0.87 1.9 2.19 N6 4.33 3.54 1.3240 1 1/2 4xUNC 1/4-20 Ø 12 M6 M6 0.87 1.78 2.89 N6 4.72 3.93 1.48

Ø [mm] Ø [inch] W4 W5 W6 W7 Wd1 Wd2 T1 T2 TF TG U1 U2 U316 5/8 0.71 1.18 0.53 0.78 M6 M6 0.73 0.41 1 0.75 1.89 0.51 0.5925 1 0.71 1.18 0,53 0.78 M6 M6 1.05 0.53 1.22 0.75 2.32 0.51 1.0632 1 1/4 1.02 1.18 0.75 1.06 M8 M8 1.24 0.57 1.04 1.57 2.64 0.67 1.3440 1 1/2 1.02 1.18 0.75 1.06 M8 M8 1.63 0.51 1.2 1.57 3.13 0.98 1.34

Ø [mm] Ø [inch] ZD M [lb] 5)16 5/8 7.36 0.48525 1 8.46 0.88232 1 1/4 9.45 1.03640 1 1/2 10.36 2.138

1) Thread depth: 0.47 inch for piston Ø 5/8, 1 and 1 1/2. 0.41 inch for piston Ø 1 1/42) Thread depth: 0.50 inch for piston Ø 5/8 - 1 1/23) Thread depth: 0.35 inch for piston Ø 5/8 - 1 1/24) Thread depth: 0.40 inch for piston Ø 5/8 - 1 1/25) M = moving mass* Can be selected in the configurator (M7 for high-speed applications)




00125260

a24




Technical Remarks■ The pressure dew point must be at least 27 °F under ambient and medium temperature and may not exceed 37 °F.■ The delivered product is lubricated for lifetime.■ Use hydraulic shock absorbers for precise end position adjustment.■ These pneumatic components with NPT or inch thread dimensions are only available from our US sales organization



Piston Ø [mm] 63Piston force [lbf] 441.51Cushioning length [inch] 0.7874Cushioning energy [in.lbs.] 18.44Speed max. [ft./s] 6.56Weight 0 mm stroke [lbs] 25.9

+10 mm stroke [lbs] 0.4254Stroke max. [inch] 169.29





00125850

00125257


Static

Ø [mm] Ø [inch] Fx [N] Fy [N] Fz [N] Mx [Nm]

My [Nm]

Mz [Nm]

16 5/8 1640 1640 4284 34 138 5325 1 2640 2640 7810 100 336 11432 1 1/4 3760 3760 9952 154 502 19040 1 1/2 6840 6840 13922 254 764 37650 2 6840 6840 13922 254 924 45563 2 1/2 6840 6840 13922 254 1120 551

Dynamic

Ø [mm] Ø [inch] Mx [Nm]

My [Nm]

Mz [Nm]

16 5/8 34 138 5325 1 100 336 11432 1 1/4 154 502 19040 1 1/2 254 764 37650 2 254 924 45563 2 1/2 254 1120 551






00125853

L = lever arm

Ø [mm] Ø [inch] α β Lx Ly Lz16 5/8 <0,1° <0,2° 260 260 26025 1 <0,1° <0,2° 344 344 34432 1 1/4 <0,1° <0,2° 404 404 40440 1 1/2 <0,1° <0,2° 440 440 44050 2 <0,1° <0,2° 532 532 53263 2 1/2 <0,1° <0,2° 644 644 644


00127082





Support span

00125844






FH

T

K1

T1

SU

PO

T3

T2 T RT

TT****

*

GS

GA

C

GB GB

TGTF

BJ

SG

RWRV

V3

V1

V2

U1

PP

PO

MCCC

ZD + S SL

BU

PL

PL

PM U2 U3 RU

*

EE

GE GF

HC

RG RG RP

HD

W2

W3

W4

W1GI

GH

HB

HA

W7

W5

GD

GK

W6GJWd1 RH Wd2

A-A

Mz

00125264

S = strokeT = Type of t-groove nutTT = Type of t-groove nut* Shock absorber optional in end cover for diameters 16-40





U2 U3 U4 RU GA GB GB GB

U1

PP

PO

EE 1) EE 1)

PK

PNPN

MyA-A 16-40

PM

A-A 50/63

00125265

1) Auxiliary air feedingAn example configuration is illustrated. The delivered product may thus deviate from the illustration.


Ø[mm]

Ø[inch]

B C BU CC EE EF EG FH GA GB GD

16 5/8 3.23 3.23 4.8 1.1 * 10-32 UNF/M7 ‒ ‒ 2.36 1.06 0.79 3.6825 1 4.06 3.92 5.79 1.1 1/8 NPTF ‒ ‒ 2.76 1.02 0.79 4.2332 1 1/4 4.13 3.94 6.69 1.1 1/8 NPTF ‒ ‒ 3.3 1.44 0.79 4.7240 1 1/2 5.2 4.8 7.32 1.1 1/4 NPTF ‒ ‒ 3.85 1.44 0.79 5.1850 2 5.69 5.22 8.07 1.1 1/4 NPTF Ø 4,59 Ø 0,91 4.7 1.22 0.79 5.863 2 1/2 6.34 5.47 9.17 1.1 3/8 NPTF Ø 0,59 Ø 1,04 5.09 1.22 0.79 6.56

Ø[mm]

Ø[inch]

GE GF GH GI GJ GK GS HA HB HC HD J

16 5/8 3.68 3.94 0.2 20/20/20 1.57 ‒ 1.26 0,3 2,75 2,181 3 0.0625 1 4.23 4.33 0.63 20/40 1.57 ‒ 1.46 0,25 3,3 1,732 5 0.0632 1 1/4 4.72 5.51 0.26 85 1.57 2.36 1 0,5 3 2,224 5 0.0640 1 1/2 5.18 6.69 0.47 100 1.57 2.36 1.24 0,5 4 2,181 6 0.0650 2 5.8 7.48 0.39 100 1.57 2.36 1.24 0,6 3,9 2,598 6.4 0.0663 2 1/2 6.56 7.48 0.39 100 1.57 2.36 1.24 0,6 4 2,354 8.4 0.06

Ø[mm]

Ø[inch]

K1 MC PK PL PM PN PO PP PR PQ RG 1) RH 2)

16 5/8 0.81 0.47 4.72 0.71 0.28 0.28 0.52 0.29 ‒ ‒ M5 4xUNC 1/4-2025 1 0.84 0.59 0.4 0.79 0.31 0.35 0.85 0.37 ‒ ‒ M5 4xUNC 1/4-2032 1 1/4 0.78 0.79 0.59 0.73 0.37 0.47 0.96 0.37 ‒ ‒ M6 4xUNC 1/4-2040 1 1/2 1.01 0.67 0.71 0.71 0.39 0.43 1.24 0.41 ‒ ‒ M6 4xUNC 1/4-2050 2 1.13 0.91 ‒ 0.63 0.63 ‒ 1.38 0.47 0.84 1.22 M8 4xUNC 5/16-18

*Can be selected in the configurator (M7 for high-speed applications), 10-32 UNF is standard.




Ø[mm]

Ø[inch]

K1 MC PK PL PM PN PO PP PR PQ RG 1) RH 2)

63 2 1/2 1.13 0.98 ‒ 0.55 0.55 ‒ 1.79 0.57 1.06 0.98 M8 4xUNC 5/16-18

Ø[mm]

Ø[inch]

RP RQ RT 3) RU 4) SG SL SU T TT W1 W2 W3 W4

16 5/8 Ø 9 M5 M5 M5 0.68 1.31 1.52 M4 N6 4.35 3.68 2.2 0.7125 1 Ø 9 M6 M5 M6 0.68 1.94 1.85 N6 N6 5.17 4.5 2.83 0.7132 1 1/4 Ø 12 M6 M6 M6 0.87 1.9 2.19 N6 N8 5.49 4.7 2.48 1.0240 1 1/2 Ø 12 M8 M6 M6 0.87 1.78 2.89 N6 N8 6.55 5.76 3.31 1.0250 2 Ø 12 M8 M8 M5 0.87 ‒ ‒ N8 N8 7.56 6.57 2.5 2.7663 2 1/2 Ø 12 M8 M8 M5 1.18 ‒ ‒ N8 N8 8.21 7.22 3.15 1.97

Ø[mm]

Ø[inch]

W5 W6 W7 Wd1 Wd2 T1 T2 T3 TF TG U1 U2 U3

16 5/8 0.05 0.53 0.78 M6 M6 0.82 0.54 ‒ 2.19 0.75 1.85 0.65 0.5925 1 0.05 0,53 0.78 M6 M6 0.79 0.55 2.13 2.81 0.75 2.24 0,7 0,8532 1 1/4 0.05 0.75 1.06 M8 M8 0.91 0.55 1.73 2.2 1.57 2.8 1.18 0,8340 1 1/2 0.05 0.75 1.06 M8 M8 0.97 1.16 2.34 3.03 1.57 3.26 1.18 1,1450 2 0.06 0.87 1.29 M12 M12 1.4 0.73 1.71 3.09 1.57 4,1 1.18 0.5963 2 1/2 0.06 0.87 1.29 M12 M12 1.8 0.67 1.56 2.56 3.15 4.5 1.18 0.59

Ø[mm]

Ø[inch]

U4 ZD M [lb] 5)

16 5/8 0.59 7.36 1.4125 1 0.59 8.46 2.7532 1 1/4 0.59 9.45 3.0940 1 1/2 0.59 9.3 5.6750 2 0.59 11.6 7.0363 2 1/2 0.59 13.11 7.63

1) Thread depth: 0.47 inch for piston Ø 5/8 - 1, 0.63 inch for piston Ø 5/8 - 1 1/2, 0.55 inch for piston Ø 5/8 - 32) Thread depth: 0.50 inch for piston Ø 5/8 - 33) Thread depth: 0.35 inch for piston Ø 5/8 - 1 1/2, 0.47 inch for piston Ø 5/8 - 34) Thread depth: 0.40 inch for piston Ø 5/8 - 35) M = moving mass


Rodless cylinders ► Metric Version


00125258

a24


Materials:Cylinder tube Aluminum, anodizedCovers Aluminum, anodizedSeals PolyurethaneSealing strips Polyurethane; Stainless steelBall rail table Aluminum, anodized

Technical Remarks■ The pressure dew point must be at least 27 °F under ambient and medium temperature and may not exceed 37 °F.■ The delivered product is lubricated for lifetime.



Piston Ø [mm] 63 80Piston force [lbf] 441.51 707.22Cushioning length [inch] 0.7874 0.7874Cushioning energy [in.lbs.] 18.44 29.5Speed max. [ft./s] 9.84 9.84Weight 0 mm stroke [lbs] 12.46 21.41

+10 mm stroke [lbs] 0.216 0.3461Stroke max. [inch] 228.34 188.97




Piston ØPorts

16M7

25G 1/8

32G 1/8

40G 1/4

50G 1/4

Stroke 3.94 R480143252 R480141454 - - -7.87 R480143255 R480141455 R480141462 - -

11.81 R480143256 R480141456 R480141463 - -15.75 R480143257 R480141457 R480141464 R480141472 R48014885419.68 R480143258 R480141458 R480141465 R480141473 R48014616623.62 R480143259 R480141459 R480141466 R480141474 R48014908127.56 R480143260 R480141460 R480141468 R480141475 R480145947

31.5 - R480141461 R480141469 R480141476 R48014860035.43 - - R480141470 R480141477 R48014702339.37 - - R480141471 R480141478 R480149199

Piston ØPorts

63G 3/8

80G 3/8

Stroke 3.94 - -7.87 - -

11.81 - -15.75 R480147730 R48014773119.68 R480147713 R48014771423.62 R480146014 R48014621027.56 R480145948 R480155522

31.5 R480147223 R48014769935.43 R480146204 R48015694839.37 R480147036 R480147700


00125850

00125255

With simultaneously moments on the cylinder this equation must be used in addition to the maximum moments check. In the cushioning phase of the movement additional forces occur and must be considered. Please use our calculation tool for rodless cylinders on the http://www.aventics.com.

Static

Piston Ø Fx [N] Fy [N] Fz [N] Mx [Nm]

My [Nm]

Mz [Nm]

16 800 150 1100 2 25 825 1800 210 3800 6 50 1232 2200 550 6600 18 80 4340 3500 650 8000 28 140 5550 5000 750 9000 35 230 7063 6800 850 13000 45 340 9080 9500 1000 13000 55 500 110




Dynamic

Piston Ø Mx [Nm]

My [Nm]

Mz [Nm]

16 0.42 10 225 1 24 332 3.8 42 1240 6 75 1550 9.1 128 2063 14.5 195 2480 20 300 28


00125764

L = lever arm

Piston Ø α β Lx Ly Lz16 0,5° 2,0° ±1° 162 94 16225 0,5° 2,0° ±1° 217 123 21732 0,6° 1,5° ±0,5° 240 139 24040 0,4° 1,0° ±0,3° 275 158 27550 0,4° 1,0° ±0,3° 317 181 31763 0,3° 1,0° ±0,3° 368 209 36880 0,3° 1,0° ±0,3° 435 245 435




Limit diagram for pneumatic cushioning with horizontal mounting

Limit diagram for pneumatic cushioning with vertical mount-ing

0013807600138077


Support span

00125843





Piston Ø 16 - 80, Dimensions in mm

FH

RT

PO

PP MC28

ZD + S

PM CU

TG

B

SG E

EE

MC

WH W5W

3W

4

W1

W2

Wd1

Wd2

RU

W7

W6

FS

FR

Mz

My

GR

00125261

S = stroke

Piston Ø B BU CU E EE FH FR FS GR MC PL PM PO16 34 118 26 36 M7 41 60 100 20 12 21.5 9 13.125 44 147 26 45.5 G 1/8 50.6 40 100 20 15 20 8 21.532 58 163 40 51.5 G 1/8 62.1 60 120 30 20 18.5 9.5 24.540 70 182 40 60.5 G 1/4 71.1 60 120 30 17 18 10 31.550 92 205 40 67.5 G 1/4 78.3 60 140 30 23 16 16 35.563 112 233 55 82.5 G 3/8 93.3 100 180 40 25 14 14 45.580 140 269 55 103.5 G 3/8 114.2 100 180 40 27 14 14 59.5

Piston Ø PP RT 1) RU 2) SG TG W1 W2 W3 W4 W5 W6 W7 Wd116 7.5 M5 M4 17.3 19 63 45.5 8 18 30 13.5 19.8 M625 9.3 M5 M4 17.3 19 73 55.5 13 18 30 13.5 19.8 M632 9.5 M6 M6 22 40 93 72.5 16 26 30 19 26.8 M840 11 M6 M6 22 40 105 84.5 22 26 30 19 26.8 M850 12.5 M8 M6 22 40 140 114.5 11 70 40 22 32.7 M1263 14.5 M8 M8 30 80 160 134.5 31 50 40 22 32.7 M1280 16.5 M8 M8 30 80 188 162.5 45 50 40 22 32.7 M12

Piston Ø Wd2 WH ZD M [kg] 3)

16 M6 63.5 187 0.0825 M6 87.5 215 0.1632 M8 90 240 0.3240 M8 101.5 263 0.4950 M12 117.1 294.2 0.7363 M12 116.5 333.2 1.3180 M12 130.5 361 2.14

1) thread depth: 9 mm for piston Ø 16–40 mm, 12 mm for piston Ø 50–80 mm2) thread depth: 6 mm for piston Ø 16–25 mm, 10 mm for piston Ø 32–50 mm, 15 mm for piston Ø 63–80 mm3) M = moving mass




00125259

a24




Technical Remarks■ The pressure dew point must be at least 27 °F under ambient and medium temperature and may not exceed 37 °F.■ The delivered product is lubricated for lifetime.■ Use hydraulic shock absorbers for precise end position adjustment.

Piston Ø [mm] 16 25 32 40Piston force [lbf] 28.55 69.46 113.97 178.04Cushioning length [inch] 0.7874 0.7874 0.7874 0.7874Cushioning energy [in.lbs.] 1.11 2.95 5.16 7.38Speed max. [ft./s] 6.56 6.56 6.56 6.56Weight 0 mm stroke [lbs] 2.07 3.62 5.36 8.64

+10 mm stroke [lbs] 0.0573 0.0903 0.1234 0.1653Stroke max. [inch] 70.86 70.86 70.86 78.74

Piston ØPorts

16M7

25G 1/8

32G 1/8

40G 1/4

Stroke 7.87 R480148169 R480146993 R480154848 R48015696611.81 R480148470 R480146765 R480154708 R48015040715.75 R480153838 R480147184 R480148680 R48015357719.68 R480147715 R480146182 R480146674 R48014634823.62 R480146105 R480147519 R480146692 R48014979427.56 R480156308 R480146193 R480146396 R480156967

31.5 - R480148254 R480153429 R48014634735.43 - - R480156962 R48015696839.37 - - R480153428 R480147888


Rodless cylinders ► Rodless cylinders



00125850

00125256


Static


My [Nm]

Mz [Nm]

16 744 744 744 4 30 3025 1456 1456 1456 10 78 7832 1840 1840 2646 22 158 11040 1640 1640 4284 36 284 109

Dynamic

Piston Ø Mx [Nm]

My [Nm]

Mz [Nm]

16 4 30 3025 10 78 7832 22 158 11040 36 284 109



00125851

L = lever arm




Piston Ø α β Lx Ly Lz16 <0,1° <0,2° 328 328 32825 <0,1° <0,2° 424 424 42432 <0,1° <0,2° 480 480 48040 <0,1° <0,2° 532 532 532



00138078 00138079


Support span

00125845





Ø 16 - 40 mm, Dimensions in mm

EE1)

MzGS

C

T

RT

FHT1

TG

TT2

TF

BJ

SG

My* *

** **P

KA-A

V1

V2

RWRV

EE1)

V3

PLU2

EE

PM

BUPL

CC MC

ZD + S SL

U3RU

SU PPU

1

PO

A-AHC

GE

HD

GF

RPRGRH

Wd1 Wd2RG

W3

W4

GD W7

W6W5

GA

HB

HA

W1

W2 G

BG

B

00125263

S = strokeT = Type of t-groove nut1) Auxiliary air feedingAn example configuration is illustrated. The delivered product may thus deviate from the illustration.* Shock absorber optional in end cover for diameters 16-40** RTC-CG 16 & 25: 2x Lube ports on each runner blockRTC-CG 32 & 40: Lube nipple of funnel type with thread connection M3

Piston Ø B C BU CC EE FH GA GB GD GE GF GS HA16 50 51 122 28 3xM7 54 7 20 93.5 38.5 110 11.5 7.625 62.5 58.1 147 28 3xG 1/8 65 6 20 107.5 53.5 108 15 5.1




Piston Ø B C BU CC EE FH GA GB GD GE GF GS HA32 75.5 71 170 28 3xG 1/8 73 16.5 20 120 60 120 17.5 12.740 85.5 74 186 28 3xG 1/4 94.4 16.5 20 131.6 71.6 120 18.5 12.7

Piston Ø HB HC HD J MC PK PL PM PN PO PP RG 1) RH 2)16 38.1 68.1 50.8 2 12 11.9 18 7 7 13.3 7.3 M5 UNC 1/4-2025 45.7 38.9 137.2 1.5 15 10.1 20 8 9 21.5 9.3 M5 UNC 1/4-2032 50.8 43.8 152.4 1.5 20 15 18.5 9.5 12 24.5 9.5 M6 UNC 1/4-2040 50.8 55.4 152.4 1.5 17 18 18 10 11 31.5 10.5 M6 UNC 1/4-20

Piston Ø RP RT 3) RU 4) RV RW SG SL SU T V1 V2 V3 W116 Ø 9 M5 M5 M5x8 Ø 9H8x1,6 17.3 33.2 38.6 N4 20 6 14 78.425 Ø 9 M5 M6 M5x8 Ø 9H8x1,6 17.3 49.3 47.1 N6 20 26.5 18 90.932 Ø 12 M6 M6 M6x10 Ø 12H8x2,1 22 48.3 55.5 N6 20 36.5 18 109.940 Ø 12 M6 M6 M6x10 Ø 12H8x2,1 22 45.1 73.4 N6 20 40.5 18 119.9

Piston Ø W2 W3 W4 W5 W6 W7 Wd1 Wd2 T1 T2 TF TG U116 61.4 24 18 30 13.5 19.8 M6 M6 18.5 10.5 25.5 19 4825 73.9 31.5 18 30 13.5 19.8 M6 M6 26.6 13.5 31 19 5932 89.9 33.5 26 30 19 26.8 M8 M8 31.5 14.5 26.5 40 6740 99.9 37.5 26 30 19 26.8 M8 M8 41.4 13 30.5 40 79.4

Piston Ø U2 U3 ZD M [kg] 5)

16 13 15 187 0.2225 12.5 27 215 0.432 17 34 240 0.4740 25 34 263.1 0.97

1) thread depth: 12 mm for piston Ø 16, 25 & 40 mm; 10,5 mm for piston Ø 322) thread depth: 12,7 mm for piston Ø 16–40 mm3) thread depth: 9 mm for piston Ø 16–40 mm4) thread depth: 10 mm for piston Ø 16–40 mm5) M = moving mass




00125260

a24




Technical Remarks■ The pressure dew point must be at least 27 °F under ambient and medium temperature and may not exceed 37 °F.■ The delivered product is lubricated for lifetime.■ Use hydraulic shock absorbers for precise end position adjustment.



Piston Ø [mm] 63Piston force [lbf] 441.51Cushioning length [inch] 0.7874Cushioning energy [in.lbs.] 18.44Speed max. [ft./s] 6.56Weight 0 mm stroke [lbs] 25.9

+10 mm stroke [lbs] 0.4254Stroke max. [inch] 145.66




Piston ØPorts

16M7

25G 1/8

32G 1/8

40G 1/4

50G 1/4

Stroke 7.87 R480156949 R480149659 R480154726 R480155259 -11.81 R480156950 R480149553 R480148820 R480154424 -15.75 R480156951 R480150759 R480148602 R480154425 R48015517519.68 R480147724 R480147725 R480147726 R480147727 R48014772823.62 R480156953 R480153574 R480148603 R480148971 R48014698727.56 R480156954 R480156959 R480154001 R480149554 R480156943

31.5 - R480155572 R480150325 R480156710 R48014977435.43 - - R480156963 R480156969 R48015694439.37 - - R480148582 R480150515 R480149030

Piston ØPorts

63G 3/8

Stroke 7.87 -11.81 -15.75 R48015694619.68 R48014772923.62 R48015694727.56 R480149638

31.5 R48015437935.43 R48014959239.37 R480149031


00125850

00125257

With simultaneously moments on the cylinder this equation must be used in addition to the maximum moments check. In the cushioning phase of the movement additional forces occur and must be considered. Please use our calculation tool for rodless cylinders on the http://www.aventics.com.

Static


My [Nm]

Mz [Nm]

16 1640 1640 4284 34 138 5325 2640 2640 7810 100 336 11432 3760 3760 9952 154 502 19040 6840 6840 13922 254 764 37650 6840 6840 13922 254 924 45563 6840 6840 13922 254 1120 551




Dynamic

Piston Ø Mx [Nm]

My [Nm]

Mz [Nm]

16 34 138 5325 100 336 11432 154 502 19040 254 764 37650 254 924 45563 254 1120 551



00125853

L = lever arm

Piston Ø α β Lx Ly Lz16 <0,1° <0,2° 260 260 26025 <0,1° <0,2° 344 344 34432 <0,1° <0,2° 404 404 40440 <0,1° <0,2° 440 440 44050 <0,1° <0,2° 532 532 53263 <0,1° <0,2° 644 644 644






00138082 00138083


Support span

00125844





Ø 16 - 63 mm, Dimensions in mm

FH

T

K1

T1

SU

PO

T3

T2 T RT

TT****

*

GS

GA

C

GB GB

TGTF

BJ

SG

RWRV

V3

V1

V2

U1

PP

PO

MCCC

ZD + S SL

BU

PL

PL

PM U2 U3 RU

*

EE

GE GF

HC

RG RG RP

HD

W2

W3

W4

W1GI

GH

HB

HA

W7

W5

GD

GK

W6GJWd1 RH Wd2

A-A

Mz

00125264

S = strokeT = Type of t-groove nutTT = Type of t-groove nut* Shock absorber optional in end cover for diameters 16-40** RTC-HD 16 & 25: funnel type lube nipple with thread M3RTC-HD 32 - 63: lube nipple DIN 71412 with thread M6




U2 U3 U4 RU GA GB GB GB

U1

PP

PO

EE 1) EE 1)

PK

PNPN

MyA-A 16-40

PM

A-A 50/63

00125265

1) Auxiliary air feedingAn example configuration is illustrated. The delivered product may thus deviate from the illustration.

Piston Ø B C BU CC EE FH GA GB GD GE GF GH GI16 82 82 122 28 M7 60 27 20 93.5 43.5 100 5 20/20/2025 103 99.5 147 28 G 1/8 70 26 20 107.5 52.5 110 16 20/4032 105 100 170 28 G 1/8 83.8 36.5 20 120 50 140 6.7 8540 132 122 186 28 G 1/4 97.7 36.5 20 131.5 46.5 170 10 10050 144.5 132.5 205 28 G 1/4 119.4 31 20 147.3 52.3 190 10 10063 161 139 233 28 G 3/8 129.4 31 20 166.5 71.5 190 10 100

Piston Ø GJ GK GS HA HB HC HD J K1 MC PK PL PM16 40 ‒ 32 7.6 69.9 55.4 76.2 1.5 20.7 12 11.9 18 725 40 ‒ 37 6.4 83.8 44 127 1.5 21.4 15 10.1 20 832 40 60 25.5 12.7 76.2 56.5 127 1.5 19.7 20 15 18.5 9.540 40 60 31.5 12.7 101.6 55.4 152.4 1.5 25.6 17 18 18 1050 40 60 31.5 15.2 99.06 66 162.6 1.5 28.6 23 N/A 16 1663 40 60 31.5 15.2 101.6 59.8 213.4 1.5 28.6 25 N/A 14 14

Piston Ø PN PO PP RG 1) RH 2) RP RT 3) RU 4) RV RW SG SL16 7 13.3 7.3 M5 UNC 1/4-20 Ø 9 M5 M5 M5x8 Ø 9H8x1,6 17.3 33.225 9 21.5 9.3 M5 UNC 1/4-20 Ø 9 M5 M6 M5x8 Ø 9H8x1,6 17.3 49.332 12 24.5 9.5 M6 UNC 1/4-20 Ø 12 M6 M6 M6x10 Ø 12H8x2,1 22 48.340 11 31.5 10.5 M6 UNC 1/4-20 Ø 12 M6 M6 M6x10 Ø 12H8x2,1 22 45.150 N/A 35 12 M8 UNC 5/16-18 Ø 12 M8 M5 - - 22 N/A63 N/A 45.5 14.5 M8 UNC 5/16-18 Ø 12 M8 M5 - - 30 N/A

Piston Ø SU T TT V1 V2 V3 W1 W2 W3 W4 W5 W6 W716 38.6 N4 N6 20 6 14 110.4 93.4 56 18 30 13.5 19.825 47.1 N6 N6 20 36.5 18 131.4 114.4 72 18 30 13.5 19.832 55.5 N6 N8 20 36.5 18 139.4 119.4 63 26 30 19 26.8




Piston Ø SU T TT V1 V2 V3 W1 W2 W3 W4 W5 W6 W740 73.4 N6 N8 20 40.5 18 166.4 146.4 84 26 30 19 26.850 N/A N8 N8 - - - 192.1 166.9 63.5 70 40 22 32.763 N/A N8 N8 - - - 208.6 183.4 80 50 40 22 32.7

Piston Ø Wd1 Wd2 T1 T2 T3 TF TG U1 U2 U3 U4 ZD M [kg] 5)

16 M6 M6 20.8 13.7 ‒ 55.5 19 47 16.5 15 15 187 0.6425 M6 M6 20 14 54 71.5 19 57 18 21.5 15 215 1.2532 M8 M8 23 14 44 56 40 71 30 21 15 240 1.440 M8 M8 24.7 29.5 59.5 77 40 82.7 30 29 15 263.1 2.5750 M12 M12 35.6 18.5 43.5 78.5 40 104.4 30 15 15 294.6 3.1963 M12 M12 45.6 17 39.5 65 80 114.4 30 15 15 333 3.46

1) thread depth: 12 mm for piston Ø 16–25, 16 mm for piston Ø 32–40, 14 mm for piston Ø 50–632) thread depth: 12,7 mm for piston Ø 16–63 mm3) thread depth: 9 mm for piston Ø 16–40 mm, 12 mm for piston Ø 50–63 mm4) thread depth: 10 mm for piston Ø 16–63 mm5) M = moving mass




00130807

a24

Working pressure min./max. 3 bar / 8 barAmbient temperature min./max. -10°C / +60°CMedium temperature min./max. -10°C / +60°CMedium Compressed airMax. particle size 5 μmPressure for determining piston forces 6,3 bar

Materials:Covers Aluminum, anodizedSeals PolyurethaneSealing strips Polyurethane; Stainless steelBall rail table Aluminum, anodizedGuide rail Steel, hardened


The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.The delivered product is lubricated for lifetime.This product may only be operated with oil-free, dry compressed air.

Technical Remarks■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.■ The delivered product is lubricated for lifetime.■ This product may only be operated with oil-free, dry compressed air.

Piston Ø [mm] 16 25 32Piston force [N] 127 309 507Cushioning length [mm] 20 20 20Cushioning energy [J] 1.5 4 7Speed max. [m/s] 2 2 2Stroke max. [mm] 1800 3700 3700

Piston ØPorts

16M7

25G 1/8

32G 1/8

Stroke 100 R480163938 R480163948 R480163958200 R480163939 R480163949 R480163959300 R480163940 R480163950 R480163960400 R480163941 R480163951 R480163961500 R480163942 R480163952 R480163962600 R480163943 R480163953 R480163963700 R480163944 R480163954 R480163964800 R480163945 R480163955 R480163965900 R480163946 R480163956 R480163966

1000 R480163947 R480163957 R480163967

Weight [kg] Piston Ø 16 25 32Stroke 100 2.18 3.88 7.5

200 2.65 4.69 8.77300 3.13 5.49 10.04400 3.6 6.29 11.31500 4.08 7.1 12.58600 4.56 7.9 13.85700 5.03 8.7 15.12800 5.51 9.5 16.39900 5.98 10.31 17.66

1000 6.46 11.11 18.93





00125850

00123809


Max. dynamic forces and torques


My [Nm]

Mz [Nm]

16 2912 2912 2912 83 116 14325 3280 3280 8568 283 454 20532 5280 5280 15620 687 867 374


Horizontally mounted, with pneumatic cushioning Vertically mounted, with pneumatic cushioning

00138074 00138075

v = Piston velocity [m/s]m = Cushionable mass [kg]




Dimensions

00130705

t = depth* CKP 16: 2x Lube ports on each runner blockCKP 25 & 30: Lube nipple of funnel type with thread connection M3

Piston Ø B E BU CC EE FH GA GB GC GD GN GE GF16 90 27.3 125 28 M7 56 15 20 20 20 93.5 38.5 11025 110 31.4 155 28 G 1/8 66 25 20 20 20 107.5 47.5 12032 145 37.8 190 28 G 1/8 85 19 40 27 40 120 40 160

Piston Ø GH GI GJ GK GL GM GT GU MC PL PM PO PP16 20 40 40 60 80 – 57 80 93.5 8 21 12.8 6.825 42 80 40 60 80 – 66 106 107.5 8 20 22 10.532 35 80 40 80 120 80 88 111 120 8 19 23.8 10.3

Piston Ø PS PT PU PW Q1 Q2 Q3 RG Ø RP RQ Ø RR Ø RS RT16 33 29.8 6.8 6 73.5 40 – M5 9 F7 M5 t=10,5 4 F7 9 F7 M625 37.5 24 10.5 10.5 87.5 40 12.5 M5 9 F7 M6 t=14,5 5 F7 12 F7 M632 57 51 12 12 100 40 12.5 M6 12 F7 M6 t=14,5 6 F7 12 F7 M6


Rodless cylinders ► Accessories

Series RTCAccessories

Kit for intermediate-stop adjustment► for RTC-CG, RTC-HD

20463

Technical Remarks■ The pressure dew point must be at least 27 °F under ambient and medium temperature and may not exceed 37 °F.■ The oil content of compressed air must remain constant during the life cycle.■ Use only the approved oils from AVENTICS, see chapter „Technical information“.■ A parts kit always consists of several individual parts.

Overview drawing

1)

2)

3)

4)

20462

1) Shock absorber parts kit2) Parts set for intermediate stop3) Clamping plate parts kit4) Parts kit for 15x120 profile




Part No. Ø25 Ø32 Ø40 Weight kgR402005896 RTC-CG – – 1) 0.4R402005897 – RTC-CG – 1) 0.35R402005898 – – RTC-CG 1) 0.35R402005899 RTC-HD – – 1) 0.3R402005900 – RTC-HD – 1) 0.35R402005901 – – RTC-HD 1) 0.35R402005904 RTC-CG

RTC-HDRTC-CG RTC-HD

RTC-CG RTC-HD

2) 0.3

R402005902 RTC-CG RTC-HD

RTC-CG RTC-HD

RTC-CG RTC-HD

3) 0.3

R412019227 RTC-CG RTC-HD

RTC-CG RTC-HD

RTC-CG RTC-HD

4) 0.3

1) Shock absorber parts kit2) Parts set for intermediate stop3) Clamping plate parts kit4) Parts kit for 15x120 profileOrder the shock absorber separately

DimensionsM5 A

20max 15

74,5

15

51

M14

38

20478 min

112

,2

80

max

D

7,7

97,2

30

1550

13021267



Series RTCAccessories - Kit for intermediate-stop adjustment (cont.)

Intermediate stop on left Intermediate stop on right

83,75

308

min

21,

5

C

L min 130

B

12020460

47,25

R

20465

Part No. A B C D L (min) R (min)R402005896 37.5 71.3 26.9 216.3 47.8 11.3R402005897 37.5 71.3 27 200.3 36.3 –R402005898 37.5 71.3 34 190.3 28.3 –R402005899 35 68.8 26 175.8 39.3 8.8R402005900 37.5 71.3 27.8 170.8 38.3 –R402005901 37.5 71.3 32.5 146.8 15.2 –




End cover mounting, MF1► for Series RTC-BV, RTC-CG, RTC-HD

00125774 ØWd2

W4

W6

W3

W7

00125781

Part No. Piston Ø For series W3 W4 W6 W7 Wd2 Weight[lbs]

Delivery quantity

[Piece]R402002728 16, 25 RTC-BV

RTC-CGRTC-HD

8 / 13 18 13,5 19,8 M6 0.4409 2

R402002729 32, 40 RTC-BVRTC-CGRTC-HD

16 / 22 26 19 26,8 M8 0.6613 2

R402002730 50 RTC-BVRTC-CGRTC-HD

11 70 22 32,7 M12 0.8818 2


31 / 45 50 22 32,7 M12 1.1 2

Material: Steel

Foot mounting, M41, M48► for Series RTC-BV, RTC-CG, RTC-HD

0012577500125782

1) see data sheet for the respective product variant



Series RTCAccessories - Foot mounting, M41, M48 (cont.)

Part No. Piston Ø For series Wd1 W5 W7 W8 Weight[lbs]

Fig. Delivery quantity

[Piece]R402003401 16, 25 RTC-BV

RTC-CGRTC-HD

6,8 30 60 – 0.1102 Fig. 1 2


8,8 30 60 – 0.1543 Fig. 1 2

R402003403 50, 63, 80 RTC-BVRTC-CGRTC-HD

13 40 80 – 0.4409 Fig. 1 2


6,8 – – 30 0.0661 Fig. 2 4


8,8 – – 30 0.0881 Fig. 2 4

R402005912 50, 63, 80 RTC-BVRTC-CGRTC-HD

13 – – 40 0.0881 Fig. 2 4

Fig. 1 M41Fig. 2 M48Material: Aluminum

Compensating coupling, S44► for Series RTC-BV

00125768

00125839



Series RTCAccessories - Compensating coupling, S44 (cont.)

Part No. Piston Ø For series DH DU FU FV FE FF GT GU GVR402002403 16, 25 RTC-BV 17,5–20 95 34 17 ±8 80 60 20 9 3R402002404 32, 40 RTC-BV 23–27 120 59 29,5 ±14 100 60 40 11 3R402002405 50, 63, 80 RTC-BV 30,5–35 150 90 45 ±24 120 80 60 15 5

Part No. Piston Ø H RU RV RX Weight[lbs]

R402002403 16, 25 0,15–0,4 M6 6.6 11 0.2204R402002404 32, 40 0,15–0,4 M8 9 15 0.6613R402002405 50, 63, 80 0,15–0,4 M10 11 15 1.76

Material: Aluminum

End cover mounting, M40► for Series RTC-SB (formerly 277-3)

P277_007

D277_004

S = strokeDelivered in pairs

Part No. For series Ø Ø AB AR AU BH BR E SA TR2771016000 RTC-SB 16 5,5 22 6 44,3 15 44,3 199 182771025000 RTC-SB 25 9 25 11 54,8 25 58 237 262771032000 RTC-SB 32 9 25 11 65,1 25 72 262 26




Part No. For series Ø E 1) L 2) S 3) Material Weight[lbs]

2772016000 RTC-SB 16 ±5 79 M12x1 Aluminumblack anodized

0.9038

2772025000 RTC-SB 25 ±5 79 M12x1 Aluminumblack anodized

1.3

2772032000 RTC-SB 32 ±10 127 M14x1,5 Aluminumblack anodized

2.07

1) recommended setting2) extra length per stop3) Shock absorber size(without shock absorber) for slide bearing guide version

Foot mounting, M41► for Series RTC-SB 16 (formerly 277-3)

P277_008

D277_006

S = stroke

Part No. For series Ø B BH HH HU LL RN Ø RO SK SL TR2771116000 RTC-SB 16 16 35 47,3 – – 58,2 6 5,8 96 36,5 18

Part No. For series TU2771116000 RTC-SB 16 73

Adjustable stop► for RTC-SB

P277_006




Foot mounting, M41► for Series RTC-SB 25-80 (formerly 277-3)

P277_008

D277_005

S = strokeDelivered in pairs

Part No. For series Ø BD BH HH HU LL RN Ø RO

SK SL Ø SS

TR TU

2771125000 RTC-SB 25-80 25 32 40 50

106 54.8 65.1 75.1 82.1

130 150 176 192

150 170 196 212

79 95

108 124

15 9 53 78

101 132

56 15 50 99 115 128 144



Series CKPAccessories

Clamping fixtures for mounting CKP► for Series CKP-16, MSC-20, CKP-25, CKP-32, MSC-25

00129096

00129099

Part No. For series 1) Typ A B C D E F G HR037531000 CKP-16

MSC-20M4 1 25 – – 9 4.6 14.5 10.5 5

R037531002 CKP-16MSC-20

M4 3 87 6 25 9 4.6 14.5 10.5 5

R037531003 CKP-16MSC-20

M4 3 107 8.5 30 9 4.6 14.5 10.5 5

R037531032 CKP-16MSC-20

M4 2 72 11 50 9 4.6 14.5 10.5 5

R037531033 CKP-16MSC-20

M4 2 62 11 40 9 4.6 14.5 10.5 5

R037531026 CKP-16MSC-20

M4 3 77 8.5 20 9 4.6 14.5 10.5 5

R037541002 CKP-25CKP-32MSC-25

M5 3 107 8.5 30 11.5 4.8 19.3 14 7

R037541026 CKP-25CKP-32MSC-25

M5 3 77 8.5 20 11.5 4.8 19.3 14 7

R037551000 CKP-25CKP-32MSC-25

M6 1 25 – – 11.5 5.3 19.3 14 7

R037551002 CKP-25CKP-32MSC-25

M6 3 142 11 40 11.5 5.3 19.3 14 7

R037551033 CKP-25CKP-32MSC-25

M6 2 72 11 50 11.5 5.3 19.3 14 7

R037551034 CKP-25CKP-32MSC-25

M6 2 62 11 40 11.5 5.3 19.3 14 7

R037551023 CKP-25CKP-32MSC-25

M6 2 47 8.5 30 11.5 5.3 19.3 14 7

1) countersink for screwMaterial: Aluminum




Easy‒2‒Combine, Connection kit► For combination: CKP / CKP

00130814

Materials:Centering sleeve Stainless steelSubbase AluminumScrews Steel, galvanized

connection kit consisting of:angle brackets, clamping fixtures, T-groove nuts, screws, centering rings

Easy‒2‒Combine basic Easy‒2‒Combine add-on part Weight Part No.[kg]

CKP-16, CKP-25 CKP-16 1.1 R039110255CKP-25 CKP-25 1.5 R039110256

CKP-32 CKP-252.1 R0391103262.8 R039110258

Y-axis connected by the profile (carriage travels)

00130681

00130588

Y-axis connected by the carriage (profile travels)

00129082

00129090

Part No. X 1) Y 2) X/YA

X/YB

X/YC D

m [kg] Weightkg

R039110255 CKP-16CKP-25

CKP-16 191201

131141

17.5 115 1.1 1.1

R039110256 CKP-25 CKP-25 226.5 152 18.5 145 1.5 1.5R039110326 CKP-32 CKP-25 248 176 21 145 2.1 2.1R039110258 CKP-32 CKP-32 286 193.5 21 175 2.8 2.8

1) basic2) add-on-partm = mass




Easy‒2‒Combine, Connection kit► For combination: CKP / CKP

00130812

Materials:Centering rings Stainless steelClamping fixtures AluminumScrews Steel, galvanizedT-groove nut Steel, galvanized

Connection kit consisting of:Clamping fixtures, T-groove nut, screws, centering rings

Easy‒2‒Combine basic Easy‒2‒Combine add-on part Weight Part No.[kg]

CKP-16, CKP-25 CKP-16 0.2 R039120045CKP-25 CKP-25 0.3 R039120046

CKP-32CKP-25 0.3 R039120047CKP-32 0.4 R039120048

Y-axis connected by the profile (carriage travels)

00129101

00129076




Y-axis connected by the carriage (profile travels)

00129083

00129089

Part No. X 1) Y 2) A Weightkg

R039120045 CKP-16CKP-25

CKP-16 96106

0.2

R039120046 CKP-25 CKP-25 116 0.3R039120047 CKP-32 CKP-25 135 0.3R039120048 CKP-32 CKP-32 150 0.4

1) basic2) add-on-partm = mass

Centering rings

00112657

00119489_a

Part No. Ø Ak6

Bk6

C±0,1

D–0,2

E+0,2

Material Delivery quantity

[Piece]

Fig.

R412000669 5 5 – 3,4 3 – Stainless steel 6 Fig. 1R412000668 7 7 – 5,5 3 – Stainless steel 6 Fig. 1R412000670 9 9 – 6,6 4 – Stainless steel 6 Fig. 1R412000671 12 12 – 9,0 4 – Stainless steel 6 Fig. 1R402003731 16 16 – 11 6 – Stainless steel 6 Fig. 1R412004030 5-7 7 5 3,4 3 1,5 Stainless steel 6 Fig. 2R412004032 5-9 9 5 3,4 3,5 1,5 Stainless steel 6 Fig. 2R412004033 7-9 9 7 5,5 3,5 1,5 Stainless steel 6 Fig. 2R412004034 9-12 12 9 6,6 4,0 2 Stainless steel 6 Fig. 2R402003736 12-16 16 12 9 5 2 Stainless steel 6 Fig. 2




Slide attachment► for RTC-BV end stop

19814

T

BE

EA

SF

J

K

L

M

N

O

G

H

I

D

C

A

Q

P

R

A

16463

Part No. For series Ø A B ØC D E F G H IR402005909 RTC-BV 25 20 14.5 6.5 M6 8 28.5 58.5 98.5 128.5R402005910 RTC-BV 32 20 10.5 8.5 M8 13.5 30.5 60.5 120.5 150.5R402005903 RTC-BV 40 20 10.5 8.5 M8 13.5 42 72 132 162R402005911 RTC-BV 50 28 10.5 8.5 M8 13.5 37.5 77.5 137.5 177.5

Part No. J K L M N O P Q R SR402005909 18.5 40.4 78.5 116.6 138.5 157 10 10 26 M6R402005910 17.5 45.5 90.5 135.5 163.5 181 15 15 40 M6R402005903 27 57 102 147 177 204 15 15 40 M6R402005911 17.5 63.1 107.5 152 197.5 215 15 15 40 M8

Part No. T Material Weight[lbs]

R402005909 6 Steelgalvanized

1.1


1.1


1.1


1.1




Bracket► for RTC-BV end stop

19815

E

K

L

P

Q

M

D

C

BA F G

HI

J

A

A

N O

P

Q

BA

N O

F G

E

C

A

A

KLM

Ø25 / 50 Ø32 - 40

D

J

IH

16464

Part No. For series Ø ØA B C D E F G H IR402005906 RTC-BV 25 5.5 M5 21 13 MF14x1.5 13.6 17.8 33.6 21.5R402005907 RTC-BV 32 - 40 5.5 M5 28 16 MF14x1.5 17.7 26.7 38.7 28.4R402005908 RTC-BV 50 8.5 M8 52 18 MF20x1.5 21 32.6 53.1 30.7

Part No. J ØK L M ØN ØO P Q Material Weight[lbs]

R402005906 65 12 19 42 4.3 8 H14 6.5 12 Steelgalvanized

1.1


1.1


1.1

Note: brackets are pre-threaded for shock absorbers (shown later in catalog)




Sensor, Series ST4► 4 mm groove ► with cable ► open cable ends, 3-pin

21304

Certificates UL (Underwriters Laboratories)Ambient temperature min./max. -22°F / +176°FProtection class IP65, IP67Switching point precision [mm] ±0,1Switching logic NO (make contact)Display LEDLED status display YellowVibration resistance 10 - 55 Hz, 1 mmShock resistance 30 g / 11 msMounting screw Combination: slotted and hexagon socket

Materials:Housing Polyamide, fiber-glass reinforcedCable sheath Polyurethane

Technical Remarks■ The max. switching capacity must not be exceeded.

Type of con-tact

Cable length

DC operating voltage

min./max.

Voltage drop U at Imax

DC switching current, max.

AC switching current, max.

Switching capacity

Part No.

[ft.] [V] [V] [A] [A]

BN

BK

BU

RL

+ / – / ~

– / + / ~Reed

9.845 / 30 I*Rs 0,13 0,13 3 W / 3 VA

R41201948816.4 R412019489

BN

BK

BU

RL

+

–PNPelectronic PNP

9.8410 / 30 ≤ 2,5 0.1 - -

R41201968016.4 R412019681

BN

BK

BU

RL

+

–NPNelectronic NPN

9.8410 / 30 ≤ 2,5 0.1 - -

R41201968416.4 R412019685

interfaces: open cable ends; 3-pinshort circuit resistant; Protected against polarity reversal

ST4, Sensor mounting► for Series ST4 ► to mount on cylinder CKP

00130808

00130815

Part No. For series CKP Material Weight[kg]

R402004226 ST4 16 Aluminum 0.034R402004227 ST4 25, 32 Aluminum 0.034

Note that Series CKP are normally delivered with 2 pairs of sensor holders.




Dimensions

3 x 0,09 mm2

30

BNBUBK

2,9

4,7

Ø2,

2L

A

C1)2)

B

21296

1) LED 2) Switching pointL = cable lengthBN = brown, BK = black, BU = blue

Part No. A B CR412019488 26.3 6.3 20.3R412019489 26.3 6.3 20.3R412019680 23.7 2.8 17.7R412019681 23.7 2.8 17.7R412019684 23.7 2.8 17.7R412019685 23.7 2.8 17.7

Sensor, Series ST4► 4 mm groove ► with cable ► Plug, M8, 3-pin

21305






Series RTCAccessories - Sensor, Series ST4 (cont.)► 4 mm groove ► with cable ► Plug, M8, 3-pin

Type of con-tact

Cable length


min./max.




Switching capacity

Part No.

[ft.] [V] [V] [A] [A]

BN

BK

BU

RL

+ / – / ~

– / + / ~Reed 0.98 5 / 30 I*Rs 0,13 0,13 3 W / 3 VA R412019682

BN

BK

BU

RL

+

–PNPelectronic PNP 0.98 10 / 30 ≤ 2,5 0.1 - - R412019683

BN

BK

BU

RL

+

–NPNelectronic NPN 0.98 10 / 30 ≤ 2,5 0.1 - - R412019694

interfaces: Plug; M8; 3-pinshort circuit resistant; Protected against polarity reversal

Dimensions

2,9

4,7

Ø2,

2

L

1 4 3

M8

36

7,6

Ø8

A

C

1)2)

B

21297

1) LED 2) Switching pointL = cable lengthPin assignment: 1 = (+), 3 = (-), 4 = (OUT)

Part No. A B CR412019682 26.3 6.3 20.3R412019683 23.7 2.8 17.7R412019694 23.7 2.8 17.7




Sensor, Series ST4► 4 mm groove ► with cable ► Plug, M8, 3-pin, with knurled screw

21306




Type of con-tact

Cable length


min./max.




Switching capacity

Part No.

[ft.] [V] [V] [A] [A]

BN

BK

BU

RL

+ / – / ~

– / + / ~Reed 0.98 5 / 30 I*Rs 0,13 0,13 3 W / 3 VA R412019490

BN

BK

BU

RL

+


BN

BK

BU

RL

+ / – / ~

– / + / ~Reed 1.64 5 / 30 I*Rs 0,13 0,13 3 W / 3 VA R412019686

BN

BK

BU

RL

+


interfaces: Plug; M8; 3-pin; with knurled screwshort circuit resistant; Protected against polarity reversal



Series RTCAccessories - Sensor, Series ST4 (cont.)► 4 mm groove ► with cable ► Plug, M8, 3-pin, with knurled screw

Dimensions

2,9

4,7

Ø2,

2

L

M8

~37

4 31

A

C

1)2)

B

21298


Part No. A B CR412019490 26.3 6.3 20.3R412019493 23.7 2.8 17.7R412019686 26.3 6.3 20.3R412019687 23.7 2.8 17.7


21306







Type of con-tact

Cable length


min./max.




Switching capacity

Part No.

[ft.] [V] [V] [A] [A]

BN

BK

BU

RL

+ / – / ~

– / + / ~Reed 0.98 5 / 30 I*Rs 0,13 0,13 3 W / 3 VA R412019688

BN

BK

BU

RL

+


interfaces: Plug; M12; 3-pin; with knurled screwshort circuit resistant; Protected against polarity reversal

Dimensions

2,9

4,7

A

C

Ø2,

2

1)2)

L

M12

~47

4

3

1

B

21299


Part No. A B CR412019688 26.3 6.3 20.3R412019689 23.7 2.8 17.7




Sensor, Series ST6► 6 mm groove ► with cable ► open cable ends, 3-pin

00112027_2

Ambient temperature min./max. -13°F / +158°FProtection class IP69KSwitching point precision [mm] ±0,1Switching capacity 3 W / 3 VAVibration resistance 10 - 55 Hz, 1 mmShock resistance 30 g / 11 ms

Materials:Housing PolyamideCable sheath Polyurethane

Type of con-tact

Cable length


min./max.

Operational voltage AC

min./max.




Part No.

[ft.] [V] [V] [V] [A] [A]

BN

BK

BU

RL

+ / – / ~

– / + / ~Reed

9.8410 / 30 10 / 30 I*Rs 0,13 0,13

083010062916.4 0830100630

32.81 R412004575

BN

BK

BU

RL

+


9.8410 / 30 - ≤ 2,5 0.1 -

083010063116.4 0830100632

32.81 R412004576

Part No. Protective resis-tor for reed

Max. switching frequency

Operating current, not

switched

Operating cur-rent, switched

LED Note

[Ω] [kHz] [mA] [mA]0830100629

15 < 0,3 - < 10 mA Yellow 1)0830100630R4120045750830100631

- < 1,0 < 20 mA < 30 mA Yellow 2)0830100632R412004576

1) Protected against polarity reversal2) short circuit resistant; Protected against polarity reversalinterfaces: without wire end ferrule, tin-plated; 3-pinUL (Underwriters Laboratories)

Dimensions

BNBUBK

L30,5

4,2

2,8

6,2

BNBUBK

40

3 x 0,14 mm2

36 x 0,07 mm2

9,15X

15,3

2*

3*1*

00111942_b

1* = switching point 2* = clamping screw 3* = LEDL = cable lengthBN = brown, BK = black, BU = blueX = electronic: 6 mm, Reed: 10 mm





00112027_5

Certificates UL (Underwriters Laboratories)Ambient temperature min./max. -13°F / +158°FProtection class IP65, IP67Switching point precision [mm] ±0,1DC operating voltage min./max. 10 V - 30 VSwitching capacity 3 W / 3 VALED status display YellowVibration resistance 10 - 55 Hz, 1 mmShock resistance 30 g / 11 ms

Materials:Housing Polyamide

Type of con-tact

Cable length


min./max.




Protective resistor for

reed

Part No.

[ft.] [V] [V] [A] [A] [Ω]

BN

BK

BU

1

4

3

RL

+ / – / ~

– / + / ~Reed

0.9810 / 30 I*Rs 0,13 0,13 15

08301004341.64 0830100436

BN

BK

BU

1

4

3

RL

+


0.98- ≤ 2,5 0.1 - -

08301004351.64 08301004370.98 R412004762

BN

BK

BU

1

4

3

RL

+

–NPNelectronic NPN 0.98 - ≤ 2,5 0.1 - - 0830100431

Part No. Max. switching frequency Operating current, not switched

Operating current, switched

Note

[kHz] [mA] [mA]0830100434

< 0,3 - < 10 mA 1); 3)08301004360830100435

< 1,0 < 20 mA < 30 mA1); 4)

0830100437 1); 4)R412004762 2); 4)0830100431 < 1,0 < 20 mA < 30 mA 1); 4)

1) Material Cable sheath: Polyurethane2) Material Cable sheath: Polyvinyl chloride3) Protected against polarity reversal4) short circuit resistant; Protected against polarity reversalinterfaces: Plug; M8; 3-pin; with knurled screw

Dimensions1 4 3

8

M8

37

30,5 L

9,252*

3*1*

X

13,7

6,2

4,2

2,9

Ø

00111942_d

1* = switching point 2* = clamping screw 3* = LEDL = cable lengthX = electronic: 6 mm, Reed: 10 mmPin assignment: 1 = (+), 3 = (-), 4 = (OUT)




Sensor, Series ST6► 6 mm groove ► with cable ► Plug, M8, 3-pin

00112027_3



Type of con-tact

Cable length


min./max.





reed

Part No.

[ft.] [V] [V] [A] [A] [Ω]

BN

BK

BU

1

4

3

RL

+ / – / ~

– / + / ~Reed 0.98 10 / 30 I*Rs 0,13 0,13 15 0830100488

BN

BK

BU

1

4

3

RL

+

–PNPelectronic PNP 0.98 - ≤ 2,5 0.1 - - 0830100489

BN

BK

BU

1

4

3

RL

+

–NPNelectronic NPN 0.98 - ≤ 2,5 0.1 - - 0830100430



Note

[kHz] [mA] [mA]0830100488 < 0,3 - < 10 mA 1)0830100489 < 1,0 < 20 mA < 30 mA 2)0830100430 < 1,0 < 20 mA < 30 mA 2)

1) Protected against polarity reversal2) short circuit resistant; Protected against polarity reversalinterfaces: Plug; M8; 3-pin

Dimensions7,6 1 4 330,5 L

9,252*

3*1*

X

13,7

6,2

4,2

2,9

Ø

8

M8

36

00111942_a

1* = switching point 2* = clamping screw 3* = LEDL = cable lengthX = electronic: 6 mm, Reed: 10 mmPin assignment: 1 = (+), 3 = (-), 4 = (OUT)





00112027_4



Type of con-tact

Cable length


min./max.





reed

Part No.

[ft.] [V] [V] [A] [A] [Ω]

BN

BK

BU

1

4

3

RL

+ / – / ~

– / + / ~Reed 0.98 10 / 30 I*Rs 0,13 0,13 15 0830100432

BN

BK

BU

1

4

3

RL

+

–PNPelectronic PNP 0.98 - ≤ 2,5 0.1 - - 0830100433



Note

[kHz] [mA] [mA]0830100432 < 0,3 - < 10 mA 1)0830100433 < 1,0 < 20 mA < 30 mA 2)

1) Protected against polarity reversal2) short circuit resistant; Protected against polarity reversalinterfaces: Plug; M12; 3-pin; with knurled screw

Dimensions

L 1

3

4

8

M12

47,5

30,5

6,2

4,2

9,252*

3*1*

X

13,7

2,9

Ø

00111942_c

1* = switching point 2* = clamping screw 3* = LEDL = cable lengthX = PNP: 6 mm, reed: 10 mmPin assignment: 1 = (+), 3 = (-), 4 = (OUT)




Connecting cable, Series CN2► Socket, Snap-in plug Ø8, 3-pin, with detent ► without wire end ferrule, tin-plated

P322_141_a

Protection class IP65Wire cross-section 0 in²

Materials:Housing color BlackCable sheath Polyvinyl chloride

Technical Remarks■ The specified protection class is only valid in assembled and tested state.

Operationalvoltage

Max. current Number of wires

Cable exit Cable length L Weight Part No.

[V DC] [V AC] [A] [ft.] [lbs]

75 60 3 3 straight 180° 8.2 0.1278 8946016112

Dimensions

0,5

30Ø3,5

4,5

5,78

LD523_104_a

L = length

!translate!

13

4

Buchse_3-polig

(1) BN=brown(3) BU=blue(4) BK=black




Connecting cable, Series CN2► Socket, M8, 3-pin ► open cable ends, 3-pin

00107009_b

Protection class IP67

Materials:Housing color BlackCable sheath Polyvinyl chlorideCable color Black

Technical Remarks■ The specified protection class is only valid in assembled and tested state.

Operationalvoltage

Max. current Number of wires

Wire cross-section

Cable exit Cable length L

Weight Part No.

[V DC]

[V AC]

[A] [in²] [ft.] [lbs]

36 30 2.5 3 0 straight 180°6.56 0.1455 8946201312

49.21 1.07 8946201332

Dimensions

24

M 8x1

3,5

3,5

9 *)

LD523_104_b

L = length*) With 15 m cable length Ø12

!translate!

13

4

Buchse_3-polig

(1) BN=brown(3) BU=blue(4) BK=black




T-groove nut► for CKP, GPC, RTC

00127083

Mge0312b7

Part No. Type For series 2) Material Weight[lbs]

3842523142 N6 CKP, GPC, RTC M5 Steelgalvanized

0.0066

3842514931 N8 CKP, GPC, RTC M8 Steelgalvanized

0.0154

1) Spring2) Thread connectionFor N4 grooves on CKP 16 a square nut according to DIN 557 can be used.

Cable holder► to mount on cylinder RTC-SB (formerly 277-3)

P277_012

303

2,45

M2,

5

00132552

Part No. Material2772116000 Aluminum

Sensor mounting► for Series ST6 ► to mount on cylinder RTC-SB (formerly 277-3)

00122884

00128136

Part No. For series Ø MaterialR402000085 ST6 16–80 Aluminum




Kit for shock absorber adjustment for RTC and CKP

00125260

Ambient temperature min./max. -- / --

1

1

5

11

1

2

22 33

3

2 2 4 4 4500124927

Part No. Single parts Ø16 Ø25 Ø32 Ø40 Ø50 Ø63

R402002804 1) 2) RTC-HD RTC-CG

CKP

– – – – –

R402002805 1) 2) – RTC-HD RTC-CG

CKP

RTC-HD RTC-CG

CKP

RTC-HD RTC-CG

– –

R402002806 2) – – – – RTC-HD RTC-HDR402003618 1) 2) RTC-HD

RTC-CG CKP

– – – – –

R402003619 1) 2) – RTC-HD RTC-CG

CKP

RTC-HD RTC-CG

CKP

RTC-HD RTC-CG

– –

R402003620 2) – – – – RTC-HD RTC-HD



Series RTCAccessories - Kit for shock absorber adjustment for RTC and CKP (cont.)

Part No. Single parts Ø16 Ø25 Ø32 Ø40 Ø50 Ø63R402002695 3) RTC-HD

RTC-CG– – – – –

R402002696 3) – RTC-HD RTC-CG

RTC-CG – – –

R402002698 3) – – RTC-HD – – –R402002699 3) – – – RTC-CG – –R402002700 3) – – – RTC-HD – –R402002701 3) – – – – RTC-HD RTC-HDR402002702 4) RTC-HD

RTC-CG CKP

– – – – –

R402002703 4) – RTC-HD RTC-CG

CKP

– – – –

R402002704 4) – – RTC-HD RTC-CG

CKP

RTC-HD RTC-CG

– –

R402003397 4) – – – – RTC-HD RTC-HD

Part No. Weight[kg]

R402002804 4R402002805 8R402002806 23R402003618 4R402003619 8R402003620 23R402002695 -R402002696 -R402002698 -R402002699 -R402002700 -R402002701 -R402002702 -R402002703 -R402002704 -R402003397 -

Industrial shock absorber, Series SA2-RT► Self-compensating, for RTC-BV, -CG and –HD

00135329

Ambient temperature min./max. +14°F / +140°FMedium Oil

Materials:Cylinder tube Steel, bronzedPiston rod Stainless steel, hardenedLock nut Steel, bronzed



Series RTCAccessories - Industrial Shock Absorber, SA2-RT (cont.)

Type Stroke for Effective mass memin./max.

Return spring force

min./max.

impact speedmin./max.

Part No.

[inch] [lbs] [lbf] [ft./s]

SA2-RT

0.39 RTC-16 1.1 / 3.97 0.79 / 1.57 11.49 / 16.4 R4120106950.39 RTC-16 3.31 / 16.98 0.79 / 1.57 6.24 / 14.1 R4120106960.39 RTC-16 11.02 / 125.66 0.79 / 1.57 2.3 / 7.87 R4120106970.55 RTC-25,-32,-40 7.72 / 37.48 2.92 / 5.17 6.24 / 13.45 R4120106980.55 RTC-25,-32,-40 21.83 / 167.55 2.92 / 5.17 2.96 / 8.2 R4120106990.55 RTC-25,-32,-40 136.69 / 555.56 2.92 / 5.17 1.65 / 3.28 R4120107000.51 RTC-50,-63 16.53 / 79.37 2.7 / 5.17 6.24 / 13.77 R4120107010.51 RTC-50,-63 44.09 / 352.74 2.7 / 5.17 2.96 / 8.53 R4120107020.51 RTC-50,-63 286.6 / 1344.81 2.7 / 5.17 1.65 / 3.28 R412010703

Part No. Mounting Mounting thread Delivery unit

R412010695

Lock nut

M12x1

1

R412010696 M12x1R412010697 M12x1R412010698 M14x1,5R412010699 M14x1,5R412010700 M14x1,5R412010701 M20x1,5R412010702 M20x1,5R412010703 M20x1,5

DimensionsE SW

A

DL

H

ØB

K

00132056_a

H = strokeA = mounting thread

Part No. Type Mounting thread ØB D E H K L SWR412010695 SA2-RT M12x1 4 2.5 4 10 15 52 14R412010696 SA2-RT M12x1 4 2.5 4 10 15 52 14R412010697 SA2-RT M12x1 4 2.5 4 10 15 52 14R412010698 SA2-RT M14x1,5 4 2.5 5 14 18.5 69 17R412010699 SA2-RT M14x1,5 4 2.5 5 14 18.5 69 17R412010700 SA2-RT M14x1,5 4 2.5 5 14 18.5 69 17R412010701 SA2-RT M20x1,5 6 2.5 6 13 18 75 24R412010702 SA2-RT M20x1,5 6 2.5 6 13 18 75 24R412010703 SA2-RT M20x1,5 6 2.5 6 13 18 75 24




Industrial shock absorber, Series SA1-MC► Self-compensating, for RTC-SB (formerly 277-3)

00136590

Ambient temperature min./max. -4°F / +176°FMedium Oil

Materials:Cylinder tube Steel, salt bath nitrocarburizedPiston rod Stainless steel, ground and hardenedLock nut Steel, salt bath nitrocarburized

Type Stroke Effective mass memin./max.

Return spring force

min./max.


Mounting Part No.


SA1-MC

0.2 1.76 / 6.17 0.45 / 1.12 2.96 / 5.24

Lock nut

R4120102840.2 3.31 / 8.82 0.45 / 1.12 2.3 / 3.93 R4120102850.2 1.1 / 8.82 0.45 / 1.12 2.96 / 8.2 R4120102860.2 1.76 / 13.23 0.45 / 1.12 2.3 / 6.23 R412010287

0.31 2.87 / 11.68 0.81 / 1.8 6.24 / 12.79 R4120102880.31 9.48 / 44.09 0.81 / 1.8 3.29 / 7.21 R4120102890.31 36.38 / 103.62 0.81 / 1.8 2.3 / 3.6 R4120102900.39 1.1 / 3.97 0.79 / 1.57 11.49 / 16.4 R4120102910.39 3.31 / 16.98 0.79 / 1.57 6.24 / 14.1 R4120102920.39 11.02 / 125.66 0.79 / 1.57 2.3 / 7.87 R412010293

Part No. Mounting thread Fig. Note

R412010284 M6x0,5 Fig. 1 -R412010285 M6x0,5 Fig. 1 1); 3)R412010286 M8x1 Fig. 2 2); 4)R412010287 M8x1 Fig. 2 2); 4)R412010288 M10x1 Fig. 3 2); 4)R412010289 M10x1 Fig. 3 2); 4)R412010290 M10x1 Fig. 3 2); 4)R412010291 M12x1 Fig. 4 2); 4)R412010292 M12x1 Fig. 4 2); 4)R412010293 M12x1 Fig. 4 2); 4)

1) sealing for piston rod: Polyurethane2) sealing for piston rod: Acrylonitrile Butadiene Rubber3) Stop: Polyoxymethylene4) Stop: Polyurethane; Steel



Series RTCAccessories - Industrial Shock Absorber, SA1-MC (cont.)

Fig. 1

CA

SW

1

B

H G

R

W

FE

D

X

L K

SW2

00110471_a

A = mounting thread

Part No. Type Mounting thread ØB ØC D E F G H K LR412010284 SA1-MC M6x0,5 2 5 4 3 2 2 5 10 27R412010285 SA1-MC M6x0,5 2 5 4 3 2 2 5 10 27

Part No. Type R SW1 SW2 W [°] XR412010284 SA1-MC 5 4 8 2 2R412010285 SA1-MC 5 4 8 2 2

Fig. 2

C WA

SW

1

H G

FE

D

X

L

SW2

B

K00110471_d

A = mounting thread

Part No. Type Mounting thread ØB ØC D E F G H K LR412010286 SA1-MC M8x1 2.3 6.5 6 3 2.5 3 5 11.5 30R412010287 SA1-MC M8x1 2.3 6.5 6 3 2.5 3 5 11.5 30

Part No. Type SW1 SW2 W [°] XR412010286 SA1-MC 5.5 11 3 3R412010287 SA1-MC 5.5 11 3 3



Series RTCAccessories - Industrial shock absorber, Series SA1-MC (cont.)

Fig. 3

CA

B

FED

H

L

SW2

SW1

G

W

K00110471_b

A = mounting thread

Part No. Type Mounting thread ØB ØC D E F G H K LR412010288 SA1-MC M10x1 3 8.4 4.5 3 2.5 3 8 14.5 44.5R412010289 SA1-MC M10x1 3 8.4 4.5 3 2.5 3 8 14.5 44.5R412010290 SA1-MC M10x1 3 8.4 4.5 3 2.5 3 8 14.5 44.5

Part No. Type SW1 SW2 W [°]R412010288 SA1-MC 3 13 2R412010289 SA1-MC 3 13 2R412010290 SA1-MC 3 13 2

Fig. 4

SWD E

T

FF G

H

KL

B

A

P

C W

00110471_c

A = mounting thread

Part No. Type Mounting thread ØB ØC D E F G H K LR412010291 SA1-MC M12x1 4 10 6 4 2.5 4 10 18.5 52R412010292 SA1-MC M12x1 4 10 6 4 2.5 4 10 18.5 52R412010293 SA1-MC M12x1 4 10 6 4 2.5 4 10 18.5 52

Part No. Type P T SW W [°]R412010291 SA1-MC 1 0.6 14 2R412010292 SA1-MC 1 0.6 14 2R412010293 SA1-MC 1 0.6 14 2




Industrial shock absorber, Series SA1-MC► Self-compensating, for RTC-SB (formerly 277-3)

00136593

Ambient temperature min./max. -4°F / +176°FMedium Oil

Materials:Cylinder tube Steel, salt bath nitrocarburizedsealing for piston rod Acrylonitrile Butadiene RubberScraper Polyurethane

Type Stroke Effective mass memin./max.

Return spring force

min./max.


Mounting Part No.


SA1-MC

0.55 7.72 / 37.48 2.92 / 5.17 6.24 / 13.45

Lock nut

R4120103040.55 21.83 / 167.55 2.92 / 5.17 2.96 / 8.2 R4120103050.55 136.69 / 555.56 2.92 / 5.17 1.65 / 3.28 R4120103060.51 16.53 / 79.37 2.7 / 5.17 6.24 / 13.77 R4120103070.51 44.09 / 352.74 2.7 / 5.17 2.96 / 8.53 R4120103080.51 286.6 / 1344.81 2.7 / 5.17 1.65 / 3.28 R4120103090.98 52.91 / 264.55 3.37 / 6.97 6.24 / 14.1 R4120103100.98 970.02 / 4519.43 3.37 / 6.97 3.29 / 8.2 R4120103110.98 3880.1 / 23809.68 3.37 / 6.97 1.65 / 3.28 R412010312

Part No. Mounting thread Fig. Note

R412010304 M14x1,5 Fig. 1 1); 4)R412010305 M14x1,5 Fig. 1 2); 3)R412010306 M14x1,5 Fig. 1 1); 4)R412010307 M20x1,5 Fig. 2 1); 4)R412010308 M20x1,5 Fig. 2 1); 4)R412010309 M20x1,5 Fig. 2 1); 4)R412010310 M25x1,5 Fig. 2 1); 4)R412010311 M25x1,5 Fig. 2 1); 4)R412010312 M25x1,5 Fig. 2 1); 4)

1) Piston rod: Stainless steel, ground and hardened2) Piston rod: Stainless steel, hardened3) sealing for piston rod: Nitrile butadiene rubber4) Lock nut: Steel, salt bath nitrocarburized



Series RTCAccessories - Industrial shock absorber, Series SA1-MC (cont.)

Fig. 1

D

B

SW2I E F

KL

WA

SW1

00121346_a

A = mounting thread

Part No. Type Mounting thread ØB D E F I K L SW1 SW2R412010304 SA1-MC M14x1,5 4 3 5 2.5 11 14 69 13 17R412010305 SA1-MC M14x1,5 4 3 5 2.5 11 14 69 13 17R412010306 SA1-MC M14x1,5 4 3 5 2.5 11 14 69 13 17

Part No. Type W [°]R412010304 SA1-MC 4R412010305 SA1-MC 4R412010306 SA1-MC 4

Fig. 2B

SW1 SW2D

A

E F

KL

W

00121346_b

A = mounting thread

Part No. Type Mounting thread ØB D E F K L SW1 SW2 W [°]R412010307 SA1-MC M20x1,5 6 10.5 6 2.5 13 75 18 24 4R412010308 SA1-MC M20x1,5 6 10.5 6 2.5 13 75 18 24 4R412010309 SA1-MC M20x1,5 6 10.5 6 2.5 13 75 18 24 4R412010310 SA1-MC M25x1,5 8 9.5 8 3.5 25 108 23 30 2R412010311 SA1-MC M25x1,5 8 9.5 8 3.5 25 108 23 30 2R412010312 SA1-MC M25x1,5 8 9.5 8 3.5 25 108 23 30 2

1. WARNING: FLUID MEDIA

AVENTICS pneumatic devices are designed and tested for use with fi ltered, clean, dry, chemical free air at pressures and temperatures within the specifi ed limits of the device. For use with media other than air or for human life support systems, AVENTICS must be consulted. Hydraulic cylinders are designed for operation with fi ltered, clean, petroleum based hydraulic fl uid; operation using fi re-resistant or other special types of fl uids may require special packing and seals. Consult the factory.

2. WARNING: MATERIAL COMPATIBILITY

Damage to product seals or other parts caused by the use of non-compatible lubricants, oil additives or synthetic lubricants in the air system compressor or line lubrication devices voids the AVENTICS warranty and can result in product failure or other malfunction. See lubrication recommendations below.

AIR LINE LUBRICANTS! In service higher than 18 cycles per minute or with continuous fl ow of air through the device, an air line lubricator is recommended.* (Do not use line lubrication with vacuum products.) However, the lubricator must be maintained since the oil will wash out the grease, and lack of lubrication will greatly shorten the life expectancy. The oils used in the lubricator must be compatible with the elastomers in the device. The elastomers are normally BUNA-N, NEOPRENE, VITON, SILICONE and HYTREL. AVENTICS recommends the use of only petroleum based oils without synthetic additives, and with an aniline point between 180° F and 210° F.

COMPRESSOR LUBRICANTS! All compressors (with the exception of special "oil free" units) pass oil mist or vapor from the internal crankcase lubricating system through to the compressed air. Since even small amounts of non-compatible lubricants can cause severe seal deterioration (which could result in component and system failure) special care should be taken in selecting compatible compressor lubricants.

3. WARNING: INSTALLATION AND MOUNTING

The user of these devices must conform to all applicable electrical, mechanical, piping and other codes in the installation, operation or repair of these devices.

INSTALLATION ! Do not attempt to install, operate or repair these devices without proper training in the technique of working on pneumatic or

hydraulic systems and devices, unless under trained supervision. Compressed air and hydraulic systems contain high levels of stored energy. Do not attempt to connect, disconnect or repair these products when a system is under pressure. Always exhaust or drain the pressure from a system before performing any service work. Failure to do so can result in serious personal injury.

MOUNTING! Devices should be mounted and positioned in such a manner that they cannot be accidentally operated.

4. WARNING: APPLICATION AND USE OF PRODUCTS

The possibility does exist for any device or accessory to fail to operate properly through misuse, wear or malfunction. The user must consider these possibilities and should provide appropriate safe guards in the application or system design to prevent personal injury or property damage in the event of a malfunction.

5. WARNING: CONVERSION, MAINTENANCE AND REPAIR

When a device is disassembled for conversion to a diff erent confi guration, maintenance or repair, the device must be tested for leakage and proper operation after being reassembled and prior to installation.

MAINTENANCE AND REPAIR! Maintenance periods should be scheduled in accordance with frequency of use and working conditions. All AVENTICS products should provide a minimum of 1,000,000 cycles of maintenance free service when used and lubricated as recommended. However, these products should be visually inspected for defects and given an "in system" operating performance and leakage test once a year. Where devices require a major repair as a result of the one million cycles, one year, or routine inspection, the device must be disassembled, cleaned, inspected, parts replaced as required, rebuilt and tested for leakage and proper operation prior to installation. See individual catalogs for specifi c cycle life estimates.

6. PRODUCT CHANGES

Product changes including specifi cations, features, designs and availability are subject to change at any time without notice. For critical dimensions or specifi cations, contact factory.

*Many AVENTICS pneumatic valves and cylinders can operate with or without air line lubrication; see individual sales catalogs for details.

-Refer to the appropriate service manual for parts and service information, most are available for download from www.aventics.com/us

NOTICE TO PRODUCT USERS

LIMITATIONS OF WARRANTIES & REMEDIESAVENTICS warrants all Products manufactured by it to be free from defects in material and workmanship under normal operating conditions and proper application in accordance with specifications for operation as described in the Data Sheet which accompanies such Products, for (i) twenty-four (24) months after date of shipment to Distributor, (ii) eighteen (18) months after date of shipment to the customer, or (iii) twelve (12) months after the Product is placed in service, whichever occurs first. Vendor or customer-supplied items on systems, assemblies are warranted per original manufacturer’s warranty policy.

THE FOREGOING WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.Buyer’s sole and exclusive remedy under this warranty shall be limited to the repair or exchange of warranted products at AVENTICS’ option FOB AVENTICS’ factory. No attempt to repair or improve the Goods or parts by any of AVENTICS’ representatives shall change or extend this warranty.

If the Buyer (as that term is hereafter defined) or Agent grants to an end user any warranty which is greater in scope, time period or labor allowance than the warranty stated herein, AVENTICS shall not be liable beyond this stated warranty. Except as otherwise provided under the Warranty Processing Procedures section of this warranty, equipment and accessories not manufactured by AVENTICS shall not be the responsibility of AVENTICS. The term “Buyer” as used herein means the person or firm that purchased the product directly from AVENTICS, and includes direct OEM customers and AVENTICS distributors.

No products shall be returned without prior authorization from AVENTICS. Buyer shall prepay all transportation charges for the return of such products to AVENTICS’ factory or authorized factory service center. AVENTICS will not accept any charges for labor and/or parts incidental to the removal and remounting of products repaired or replaced under this warranty. All repair and replacement parts provided under this warranty will assume the identity, for warranty purposes, of the part replaced and the warranty on such replacement parts will expire when the warranty on the original part would have expired. Claims must be submitted within 30 days of failure or be subject to rejection. This warranty is not transferable beyond the first using purchaser. An AVENTICS Quality Service Report (QSR) to initiate the warranty request is available online (www.aventics.com/us/downloads).

Additonal conditions apply - for full details, download our Terms & Conditions of Sale from www.aventics.com/us/downloads.

AVENTICS Corporation1953 Mercer Road

Lexington, KY 40511

Tel 859.254.8031

Fax 800.489.1488

www.aventics.com/us

[email protected]

AVENTICS Incorporated5515 North Service Rd

Suite #104

Burlington, Ontario L7L 6G4

Tel 905.332.0399

Fax 905.332.8596

www.aventics.com/ca

[email protected]

Further contacts:

www.aventics.com/en/contact

The data specified only serve to

describe the product. No statements

concerning a certain condition or

suitability for a certain application

can be derived from our information.

The information given does not re-

lease the user from the obligation of

own judgment and verification. It

must be remembered that our

products are subject to a natural

process of wear and aging.

SC-200.15 2015-07 Subject to change. Printed in USA. © AVENTICS Corporation

This document, as well as the data, specifications and other information set forth in it, are the exclusive

property of AVENTICS. It may not be reproduced or given to third parties without its consent.

series rtc rodless cylinders pneumatic … · 6 aventics series rtc rodless cylinders rodless...

Documents