sensors catalogue - pyrocontrole · 2019. 2. 19. · as per asme ptc19.3 tw-2016 pressure test...
TRANSCRIPT
SENSORSCATALOGUETEMPERATURE MEASUREMENT IN INDUSTRIAL ENVIRONMENTS
THERMOWELLS
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM238
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM 239
240
242
244
246
248
250
252
254
256
258 Forged
Full penetration
Double welding
Screwed/Welded
Double welding
Screwed/Welded
Double welding
PCB-F
PCB-PP
PCB-2S
PCB-VS
PCV
PDB-2S
PDB-VS
PDV
PMSB
PMSV
Flanged
Screwed
Flanged
Screwed
Flanged
Screwed
Straight
Tapered
Straight
Bored
Mechanically welded
Thermowell
PRODUCT TYPE DESIGN PROCESS CONNECTION CONSTRUCTION MODEL
THERMOWELLS MECHANICALLY WELDED
PMSVTHERMOWELL
DESCRIPTION
Straight, screw-on, mechanically-welded thermowell for use in undemanding operating conditions.
SPECIFICATIONS
Model PMSV
Max. pressure and temperature 100 bar / 350°C
Instrument connection Leak-tight fitting
Sensor diameter 3 - 4.5- 6 mm
Process connection 1/8"- 1/4" - 3/8" - 1/2"- 3/4" NPT
G 1/8"- 1/4" - 3/8" - 1/2" - 3/4" 5x3.5 - 6x5 - 9x7
Tube diameter (mm) 5x3.5 - 6x5 - 9x7
Material 316
Length L min/max (mm) 50 to 400 mm
STRAIGHT SCREW-ON
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM240
THERMOWELLS MECHANICALLY WELDED
DESIGN YOUR THERMOWELL CONFIGURATOR CODE
Parameters to be indicated when ordering
MODEL Ø TUBE (mm) L (mm) SENSOR DIAMETER (mm) PROCESS CONNECTION
PMSV - - - -
Reference in table and diagram
Possible choice
5 x 3.5: A6 x 5: B9 x 7: C
50 - 100 - 150 - 200 - 300 - 400
3.5: 354: 406: 60
1/8" NPT: N181/4"NPT: N143/8"NPT: N381/2"NPT: N123/4" NPT: N34G 1/8": G18G1/4": G14G3/8": G38G1/2": G12G3/4": G34
21 3 4
For any other configuration, please contact us.
DIAGRAM
1
23
4
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM 241
THERMOWELLS MECHANICALLY WELDED
PMSBTHERMOWELL
DESCRIPTION
Straight, flanged, mechanically-welded thermowell for use in undemanding operating conditions.
SPECIFICATIONS
Model PMSB
Instrument connection 1/2"NPT
Process connection See table opposite
Tube diameter (mm) 10, 11, 12, 15, 20
Material 316L - 321
Length L min/max (mm) 50 to 2,000 mm
FLANGEDSTRAIGHT
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM242
THERMOWELLS MECHANICALLY WELDED
DESIGN YOUR THERMOWELL CONFIGURATOR CODE
Parameters to be indicated when ordering
For any other configuration, please contact us.
1/2" NPT
TABLE OF FLANGES 2
Flange code Material
ANSI B16.5 EN1092-1DN Class Face DN PN Face
217 316L 1"1/2 150 RF 40 20 B1
218 316L 1"1/2 300 RF 40 50 B1
427 316L 1"1/2 600 RF 40 100 B1
540 321 1"1/2 150 RF 40 20 B1
481 321 1"1/2 300 RF 40 50 B1
482 321 1"1/2 600 RF 40 100 B1
DIAGRAM
MODEL MATERIAL TUBE DIAMETER (mm) FLANGE L (mm)
PMSB - - - -
Reference in table and diagram
Possible choice
316L: AC321: AR
10, 11, 12, 15, 20 See table below 50 - 2 000 mm
1 2 3
1
3
2
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM 243
THERMOWELLS BORED
PDVTHERMOWELL
DESCRIPTION
Straight, screw-on thermowell bored from bar stock, for use in demanding operating conditions. It offers an excellent mechanical pressure withstand.
SPECIFICATIONS
Model PDV
Instrument connection 1/2"NPT
Process connection 3/4"NPT - 1"NPT - G3/4" - G1"
Diameter (mm) 20
Bore diameter (mm) 10 / 6.2
Material 304L - 316L - 321
Length L min/max (mm) 50 to 500 mm
Tip Normal - Thinned - Reduced
Roughness Ra 0.8 - 1.6
Non-Destructive Tests for compliance with the PED directive 2014/68/EU
Material certificate As per EN10204 3.1
Pressure test
Internal at 1.5xPN for 15' (max. 600 bar) as per ASME Section
XIII Division 1 Section UG-99
PMI 1 point
Coating Stellite, thickness 2 mm MFA, thickness 0.1mm
Tantalum, thickness 0.5mm Hard chromium plating
BORED FROM BAR
STOCK STRAIGHT SCREW-
ON
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM244
THERMOWELLS BORED
DIAGRAM
DESIGN YOUR THERMOWELL CONFIGURATOR CODE
Parameters to be indicated when ordering OPTION
MODEL PROCESS CONNECTION MATERIAL LENGTH L (mm) TIP RA COATING NDT
PDV - - - - - - -
Reference in table and diagram
Possible choice
3/4"NPT: N341"NPT: N10G3/4": G34G1": G10
304L: AB316L: AC321: AR
50 to 500 mm Normal: N Thinned: A Reduced: R
0.8: 081.6: 16
Without: 0000 Stellite: SXXX
L max.: 200 mm Halar: Mxxx
Tantalum: Txxx (xxx: length in mm from tip)
In compliance with the PED
directive 2014/68/EU (see table below).
1 2 3 54
For any other configuration, please contact us.
2
4
1
NON-DESTRUCTIVE TESTING 5
X X X For compliance with the PED directive 2014/68/EU
1 Material certificate
1 Pressure test (1.5xPN)
1 PMI
N
A
R
3
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM 245
THERMOWELLS BORED
PDB-VSTHERMOWELL
DESCRIPTION
Straight thermowell bored from bar stock, with screwed and welded flange, for use in demanding operating conditions. It offers an excellent mechanical pressure withstand.
SPECIFICATIONS
Model PDB-VS
Compliance with standards ASME B16.5
Instrument connection 1/2"NPT
Process connection Flange As per table opposite
Diameter (mm) 20
Bore diameter (mm) 10 / 6.2
Material 316L - 321
Length L min/max (mm) 50 to 500 mm
Roughness Ra 0.8 - 1.6
Non-Destructive Tests for compliance with the PED directive 2014/68/EU
Material certificate As per EN10204 3.1
Pressure test Internal at 1.5xPN for 15' (max. 600
bar) as per ASME Section XIII Division 1 Section UG-99
Penetrant test Performed according to EN ISO3452
and interpreted according to EN ISO23277 level 1 or ASME VIII div 1.
PMI 2 points (flange + thermowell)
Coating Stellite, thickness 2 mm MFA, thickness 0.1mm
Tantalum, thickness 0.5mm Hard chromium plating
BORED FROM BAR
STOCK
ASMEB16.5FLANGEDSTRAIGHT
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM246
THERMOWELLS BORED
For any other configuration, please contact us.
FLANGES1
Flange code Material
ANSI B16.5 EN1092-1DN Class Face DN PN Face
217 316L 1"1/2 150 RF 40 20 B1
218 316L 1"1/2 300 RF 40 50 B1
427 316L 1"1/2 600 RF 40 100 B1
540 321 1"1/2 150 RF 40 20 B1
481 321 1"1/2 300 RF 40 50 B1
482 321 1"1/2 600 RF 40 100 B1
DESIGN YOUR THERMOWELL CONFIGURATOR CODE
Parameters to be indicated when ordering EN OPTION
MODEL FLANGE MATERIAL LENGTH L (mm) TIP RA COATING NDT
PDB-VS - - - - - - -
Reference in table and diagram
Possible choice
As per table below 316L: AC321: AR
50 to 500 mm Normal: N Thinned: A Reduced: R
0.8: 081.6: 16
Without: 0000 Stellite: SXXX
L max.: 200mm Halar: Mxxx
Tantalum: Txxx (xxx: length in mm
from tip)
In compliance with the PED
directive 2014/68/EU (see table opposite).
1 2 3 4 5 6
DIAGRAM
NON-DESTRUCTIVE TESTING 6
X X X X For compliance with the PED directive 2014/68/EU
1 Material certificate: flange + thermowell
1 Weld penetrant test (COFREND 2) 1 Pressure test (1.5xPN)
1 PMI
2
5
4
1
N
A
R
3
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM 247
THERMOWELLS BORED
PDB-2STHERMOWELL
DESCRIPTION
Straight thermowell bored from bar stock, with flange welded on both sides (partial penetration), for use in demanding operating conditions. It offers an excellent mechanical pressure withstand.
SPECIFICATIONS
Model PDB-2S
Compliance with standards ASME B16.5
Instrument connection 1/2"NPT
Process connection Flange As per table opposite
Diameter (mm) 20
Bore diameter (mm) 10 / 6.2
Material 316L - 321
Length L min/max (mm) 50 to 500 mm
Roughness Ra 0.8 - 1.6
Non-Destructive Tests for compliance with the PED directive 2014/68/EU
Material certificate As per EN10204 3.1
Pressure test Internal at 1.5xPN for 15'
(max. 600 bar) as per ASME Section XIII Division 1 Section UG-99
Penetrant test Performed according to EN ISO3452
and interpreted according to EN ISO23277 level 1 or ASME VIII div 1.
PMI 2 points (flange + thermowell)
Coating Stellite, thickness 2 mm MFA, thickness 0.1mm
Tantalum, thickness 0.5mm Hard chromium plating
BORED FROM BAR
STOCK
ASMEB16.5FLANGEDSTRAIGHT
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM248
THERMOWELLS BORED
For any other configuration, please contact us.
FLANGES 1
Flange code Material
ANSI B16.5 EN1092-1DN Class Face DN PN Face
217 316L 1"1/2 150 RF 40 20 B1
218 316L 1"1/2 300 RF 40 50 B1
427 316L 1"1/2 600 RF 40 100 B1
540 321 1"1/2 150 RF 40 20 B1
481 321 1"1/2 300 RF 40 50 B1
482 321 1"1/2 600 RF 40 100 B1
DESIGN YOUR THERMOWELLCONFIGURATOR CODE
Parameters to be indicated when ordering OPTION
MODEL FLANGE MATERIAL LENGTH L (mm) TIP RA COATING NDT
PDB-2S - - - - - - -
As per table below
316L: AC321: AR
50 to 500 mm Normal: N Thinned: A Reduced: R
0.8: 081.6: 16
Without: 0000 Stellite: SXXX
L max.: 200mm Halar: Mxxx
Tantalum: Txxx (xxx: length in mm
from tip)
In compliance with the PED
directive 2014/68/EU (see table opposite).
1 2 3 4 65
DIAGRAM
NON-DESTRUCTIVE TESTING 6
X X X X For compliance with the PED directive 2014/68/EU
1 Material certificate: flange + thermowell
1 Weld penetrant test (COFREND 2) 1 Pressure test (1.5xPN)
1 PMI
2
1
N
A
R
3
5
4
Reference in table and diagram
Possible choice
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM 249
THERMOWELLS BORED
PCVTHERMOWELL
DESCRIPTION
Tapered, screw-on thermowell bored from bar stock, for use in demanding operating conditions. It offers an excellent mechanical pressure withstand. Compatible with PED 2014/68/EU.
SPECIFICATIONS
Model PCV
Compliance with standards ASME PTC19,3 TW-2016
Instrument connection 1/2"NPT
Process connection 3/4"NPT - 1"NPT - G3/4" - G1"
Thermowell shape 21x16 - 26x19
Bore diameter (mm) 6.2 - 6.5 - 8.2
Material 304L - 316L - 321
Length L min/max (mm) 50 to 500 mm
Roughness Ra 0.8 - 1.6
Non-Destructive Tests for compliance with the PED directive 2014/68/EU
Material certificate As per EN10204 3.1
Calculation note As per ASME PTC19.3 TW-2016
Pressure test Internal at 1.5xPN for 15'
(max. 600 bar) as per ASME Section XIII Division 1 Section UG-99
PMI 1 point
Coating Stellite, thickness 2 mm MFA, thickness 0.1mm
Tantalum, thickness 0.5mm Hard chromium plating
TAPERED BORED
FROM BAR STOCK
SCREW-ON
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM250
THERMOWELLS BORED
For any other configuration, please contact us.
DESIGN YOUR THERMOWELLCONFIGURATOR CODE
Parameters to be indicated when orderingOPTION
MODEL PROCESS CONNECTION CONE AXB (mm) Ø BORE MATERIAL LENGTH L (mm) RA OPTION NDT
PCV - - - - - - - -
Reference in table and diagram
Possible choice
3/4"NPT: N341"NPT: N10G3/4": G34
G1: G10
21x16: 2126x19: 26
6.2: 626.5: 658.2: 82
304L: AB316L: AC321: AR
50 to 500 mm 0.8: 081.6: 16
Compliant with the PED
directive 2014/68/EU (see table below).
Without: 0000 Stellite
L max.: 200mm xxx: length in
mm from tip: SXXX
Polishing: P000
21 3 4 5 6 7
DIAGRAM
4
5
1
3
6
2
NON-DESTRUCTIVE TESTING 7
X X X For compliance with the PED directive 2014/68/EU
1 Material certificate: thermowell
1 Pressure test (1.5xPN)
1 PMI
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM 251
THERMOWELLS BORED
PCB-VSTHERMOWELL
DESCRIPTION
Tapered thermowell bored from bar stock, with screw-on welded flange, for use in demanding operating conditions.It offers an excellent mechanical pressure withstand. Compatible with PED 2014/68/EU.
ASMEB16.5
SPECIFICATIONS
Model PCB-VS
Compliance with standards ASME B16.5
Instrument connection 1/2"NPT
Process connection Flange As per table opposite
Thermowell shape AxB (mm) 21x16 - 26x19
Bore diameter d (mm) 6.2 - 6.5 - 8.2
Material 316L - 321
Length L min/max (mm) 50 to 500 mm
Roughness Ra 0.8 - 1.6
Non-Destructive Tests for compliance with the PED directive 2014/68/EU
Material certificate As per EN10204 3.1
Stress withstand
calculation note
As per ASME PTC19.3 TW-2016
Pressure test Internal at 1.5xPN for 15'
(max. 600 bar) as per ASME Section XIII Division 1 Section UG-99
Penetrant test Performed according to EN ISO3452
and interpreted according to EN ISO23277 level 1 or ASME VIII div 1.
PMI 2 points (flange + thermowell)
Coating Stellite, thickness 2 mmMFA, thickness 0.1mm
Tantalum, thickness 0.5mmHard chromium plating
TAPERED BORED
FROM BAR STOCK
FLANGED
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM252
THERMOWELLS BORED
For any other configuration, please contact us.
FLANGES 1
Flange code Material
ANSI B16.5 EN1092-1DN Class Face DN PN Face
217 316L 1"1/2 150 RF 40 20 B1
218 316L 1"1/2 300 RF 40 50 B1
427 316L 1"1/2 600 RF 40 100 B1
411 316L 1"1/2 600 RJ 40 100
540 321 1"1/2 150 RF 40 20 B1
481 321 1"1/2 300 RF 40 50 B1
482 321 1"1/2 600 RF 40 100 B1
245 321 1"1/2 600 RJ 40 100
NON-DESTRUCTIVE TESTING7
X X X X For compliance with the PED directive 2014/68/EU
1 Material certificate: flange + thermowell
1 Calculation note as per ASME PTC19.3 TW-2016
1 Pressure test (1.5xPN)
1 PMI
DESIGN YOUR THERMOWELL CONFIGURATOR CODE
Parameters to be indicated when orderingOPTION
MODEL FLANGE CONE AXB (mm) Ø (mm) MATERIAL LENGTH L (mm) RA COATING NDT
PCB-VS - - - - - - - -
Reference in table and diagram
Possible choice
As per table below 21x16: 2126x19: 26
316L: AC321: AR
50 to 500 mm 6.2: 626.5: 658.2: 82
0.8: 081.6: 16
Without: 0000 Stellite: Sxxx
L max.: 200mm Halar: Mxxx
Tantalum: Txxx (xxx: length in mm
from tip)
In compliance with the PED
directive 2014/68/EU (see table opposite).
21 3 4 5 6 7
DIAGRAM
1
6
4
5
3
2
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM 253
THERMOWELLS BORED
PCB-2STHERMOWELL
DESCRIPTION
Tapered thermowell bored from bar stock, with flange welded on both sides, for use in demanding operating conditions. It offers an excellent mechanical pressure withstand. Compatible with PED 2014/68/EU.
SPECIFICATIONS
Model PCB-2S
Compliance with standards ASME B16.5
Instrument connection 1/2"NPT
Process connection Flange As per table opposite
Thermowell shape AxB (mm) 21x16 - 26x19
Bore diameter d (mm) 6.2 - 6.5 - 8.2
Material 316L - 321
Length L min/max (mm) 50 to 500 mm
Roughness Ra 0.8 - 1.6
Non-Destructive Tests for compliance with the PED directive 2014/68/EU
Material certificate As per EN10204 3.1
Stress withstand
calculation note
As per ASME PTC19.3 TW-2016
Pressure test Internal at 1.5xPN for 15'
(max. 600 bar) as per ASME Section XIII Division 1 Section UG-99
Penetrant test Performed according to EN ISO3452
and interpreted according to EN ISO23277 level 1 or ASME VIII div 1.
PMI 2 points (flange + thermowell)
Coating Stellite, thickness 2 mmMFA, thickness 0.1mm
Tantalum, thickness 0.5mmHard chromium plating
ASMEB16.5 TAPERED
BORED FROM BAR
STOCK FLANGED
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM254
THERMOWELLS BORED
For any other configuration, please contact us.
FLANGES1
Flange code Material
ANSI B16.5 EN1092-1DN Class Face DN PN Face
217 316L 1"1/2 150 RF 40 20 B1
218 316L 1"1/2 300 RF 40 50 B1
427 316L 1"1/2 600 RF 40 100 B1
411 316L 1"1/2 600 RJ 40 100
540 321 1"1/2 150 RF 40 20 B1
481 321 1"1/2 300 RF 40 50 B1
482 321 1"1/2 600 RF 40 100 B1
245 321 1"1/2 600 RJ 40 100
DIAGRAM
DESIGN YOUR THERMOWELL CONFIGURATOR CODE
Parameters to be indicated when orderingOPTION
MODEL FLANGE CONE AXB (mm) Ø (mm) MATERIAL LENGTH L (mm) RA COATING NDT
PCB-2S - - - - - - - -
Reference in table and diagram
Possible choice
As per table below 21x16: 2126x19: 26
316L: AC321: AR
50 to 500 mm 6.2: 626.5: 658.2: 82
0.8: 081.6: 16
Without: 0000 Stellite: SXXX
L max.: 200mm Halar: Mxxx
Tantalum: Txxx (xxx: length in mm from tip)
In compliance with the PED
directive 2014/68/EU (see table opposite).
21 3 4 6 75
NON-DESTRUCTIVE TESTING7
X X X X X For compliance with the PED directive 2014/68/EU
1 Material certificate: flange + thermowell
1 Calculation note as per ASME PTC19.3 TW-2016
1 Weld penetrant test (COFREND 2) 1 Pressure test (1.5xPN)
1 PMI
61
4
5
3
2
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM 255
THERMOWELLS BORED
PCB-PPTHERMOWELL
DESCRIPTION
Tapered thermowell bored from bar stock with full-penetration welded flange, for use in demanding operating conditions. It offers an excellent mechanical pressure withstand. Compatible with PED 2014/68/EU.
SPECIFICATIONS
Model PCB-PP
Compliance with standards ASME B16.5
Instrument connection 1/2"NPT
Process connection Flange As per table opposite
Thermowell shape AxB (mm) 26x19 - 31x26 - 36x33
Bore diameter d (mm) 6.2 - 6.5 - 8.2
Material 316L - 321
Length L min/max (mm) 50 to 500 mm
Roughness Ra 0.8 - 1.6
Non-Destructive Tests for compliance with the PED directive 2014/68/EU
Material certificate As per EN10204 3.1
Stress withstand
calculation note
As per ASME PTC19.3 TW-2016
Pressure test Internal at 1.5xPN for 15'
(max. 600 bar) as per ASME Section XIII Division 1 Section UG-99
Penetrant test
Root and final, internal and external, performed as per EN ISO3452 and
interpreted as per EN ISO23277 level 1 or ASME VIII div 1 for auto TIG, level
2 for manual TIG.
PMI 3 points (flange, thermowell and weld)
Coating Stellite, thickness 2 mmMFA, thickness 0.1mm
Tantalum, thickness 0.5mmHard chromium plating
ASMEB16.5 TAPERED
BORED FROM BAR
STOCK FLANGED
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM256
THERMOWELLS BORED
FLANGES 1
Flange code Material
ANSI B16.5 EN1092-1DN Class Face DN PN Face
217 316L 1"1/2 150 RF 40 20 B1
218 316L 1"1/2 300 RF 40 50 B1
427 316L 1"1/2 600 RF 40 100 B1
411 316L 1"1/2 600 RJ 40 100
463 316L 1"1/2 1500 RJ 40 250
540 321 1"1/2 150 RF 40 20 B1
481 321 1"1/2 300 RF 40 50 B1
482 321 1"1/2 600 RF 40 100 B1
245 321 1"1/2 600 RJ 40 100
541 321 1"1/2 1500 RJ 40 250
DIMENSION LINKED TO FLANGE 8
Flange Class E (mm)
=< 600 52.8
>600 80
HEAD AND THERMOWELL DEPTH
AxB (mm) Diam. C (mm) D (mm)
26x19 35 9.5
31x26 40 10
36x33 45 13.5
DIAGRAM
DESIGN YOUR THERMOWELL CONFIGURATOR CODE
Parameters to be indicated when ordering OPTION
MODEL FLANGE CONE AXB (mm) Ø (mm) MATERIAL LENGTH L (mm) RA COATING NDT
PCB-PP - - - - - - - -
21 3 4 5 6 7
6
4
5
3
1
8
2
NON-DESTRUCTIVE TESTING 7
X X X X X For compliance with the PED directive 2014/68/EU
1 Material certificate: flange + thermowell
1 Calculation note as per ASME PTC19.3 TW-2016
1 Weld penetrant test (COFREND 2) 1 Pressure test (1.5xPN)
1 PMI
For any other configuration, please contact us.
Reference in table and diagram
Possible choice
As per table below 21x16: 2126x19: 2636x33: 36
316L: AC321: AR
50 to 500 mm 6.2: 626.5: 658.2: 82
0.8: 081.6: 16
Without: 0000 Stellite: SXXX
L max.: 200mm Halar: Mxxx
Tantalum: Txxx (xxx: length in mm from tip)
In compliance with the PED
directive 2014/68/EU (see table opposite).
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM 257
THERMOWELLS BORED
PCB-FTHERMOWELL
DESCRIPTION
Tapered thermowell bored from bar stock with flange, made from forging interstage, for use in very demanding operating conditions. It offers an excellent mechanical pressure withstand. Compatible with PED 2014/68/EU.
SPECIFICATIONS
Model PCB-F
Compliance with standards ASME B16.5
Instrument connection 1/2"NPT
Process connection Flange As per table opposite
Thermowell shape AxB (mm) 26x19 - 31x26 - 36x33 - 41x36
Bore diameter d (mm) 6.2 - 6.5 - 8.2
Material 316L - 321
Length L min/max (mm) 50 to 500 mm
Roughness Ra 0.8 - 1.6
Non-Destructive Tests for compliance with the PED directive 2014/68/EU
Material certificate As per EN10204 3.1
Stress withstand
calculation note
As per ASME PTC19.3 TW-2016
Pressure test Internal at 1.5xPN for 15'
(max. 600 bar) as per ASME Section XIII Division 1 Section UG-99
PMI 1 point (forged bar)
Coating Stellite, thickness 2 mm MFA, thickness 0.1mm
Tantalum, thickness 0.5mm Hard chromium plating
ASMEB16.5 TAPERED FORGED FLANGED
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM258
THERMOWELLS BORED
FLANGES 1
Flange code Material
ANSI B16.5 EN1092-1DN Class Face DN PN Face
217 316L 1"1/2 150 RF 40 20 B1
218 316L 1"1/2 300 RF 40 50 B1
427 316L 1"1/2 600 RF 40 100 B1
411 316L 1"1/2 600 RJ 40 100
463 316L 1"1/2 1500 RJ 40 250
540 321 1"1/2 150 RF 40 20 B1
481 321 1"1/2 300 RF 40 50 B1
482 321 1"1/2 600 RF 40 100 B1
245 321 1"1/2 600 RJ 40 100
541 321 1"1/2 1500 RJ 40 250
219 316L 2" 150 RF 50 20 B1
409 316L 2" 300 RF 50 50 B1
448 316L 2" 600 RF 50 100 B1
238 316L 2" 600 RJ 50 100
477 316L 2" 1500 RJ 50 250
502 316L 2" 2500 RJ 50 420
562 321 2" 150 RF 50 20 B1
269 321 2" 300 RF 50 50 B1
519 321 2" 600 RF 50 100 B1
563 321 2" 600 RJ 50 100
564 321 2" 1500 RJ 50 250
565 321 2" 2500 RJ 50 420
DIMENSION LINKED TO FLANGE
Flange Class E (mm)
=< 600 52.8
>600 80
HEAD AND THERMOWELL DEPTH4
7
DN AxB (mm) C (mm) D (mm)
1"1/2 26x19 35 9.5
1"1/2 - 2"31x26 40 10
36x33 45 13.52" 41x36 50 15
DIAGRAM
DESIGN YOUR THERMOWELL CONFIGURATOR CODE
Parameters to be indicated when ordering OPTION
MODEL FLANGE CONE AxB (mm) Ø (mm) MATERIAL LENGTH L (mm) RA COATING NDT
PCB-F - - - - - - - -
Reference in table and diagram
Possible choice
As per table below 26x19 : 2631x26 : 3136x33 : 3641x36 : 41
316L : AC321 : AR
50 to 500 mm 6.2 : 626.5 : 658.2 : 82
0.8 : 081.6 : 16
Without: 0000 Stellite: SXXX
L max.: 200mm Halar: Mxxx
Tantalum: Txxx (xxx: length in mm
from tip)
In compliance with the PED
directive 2014/68/EU (see table opposite).
21 3 4 5 6
NON-DESTRUCTIVE TESTING 6
X X X X For compliance with the PED directive 2014/68/EU
1 Material certificate: flange + thermowell
1 Calculation note as per ASME PTC19.3 TW-2016
1 Pressure test (1.5xPN)
1 PMI
5
4 7
3
2
For any other configuration, please contact us.
SENSORS CATALOGUE | WWW.PYROCONTROLE.COM 259
CHAUVIN ARNOUX METRIX190, rue Championnet75876 Paris Cedex 18 - FranceTel. : +33 1 44 85 44 85Fax : +33 1 46 27 07 [email protected]
CHAUVIN ARNOUX190, rue Championnet75876 Paris Cedex 18 - FranceTel. : +33 1 44 85 44 85Fax : +33 1 46 27 07 [email protected]
TEST & MEASUREMENT
20182018
TES
T &
MEA
SUR
EMEN
T C
ATAL
OGUE
9061
3111
6 - E
d. 3
- 04
/201
8 - N
on-c
ontra
ctua
l doc
umen
t - S
péci
ficat
ions
are
to b
e co
nfirm
ed a
t tim
e of
ord
erin
g
CHAUVIN ARNOUX METRIX190, rue Championnet75876 PARIS Cedex 18Tel.: +33 1 44 85 44 85Fax: +33 1 46 27 07 [email protected]
PYROCONTROLE6 bis, av du Docteur Schweitzer69881 MEYZIEU CedexTel.: +33 4 72 14 15 40Fax: +33 4 72 14 15 [email protected]
CATALOGUECAPTEURSLA MESURE DE TEMPÉRATURE EN MILIEU INDUSTRIEL
CHAUVIN ARNOUX ENERGY 16, rue Georges Besse92182 ANTONY CedexTel.: +33 1 75 60 10 30Fax: +33 1 46 66 62 [email protected] - www.enerdis.fr
ALLEMAGNEChauvin Arnoux GmbHOhmstraße 177694 KEHL / RHEINTél. : +49 07851 99 26-0Fax : +49 07851 99 [email protected]
AUTRICHEChauvin Arnoux Ges.m.b.HSlamastrasse 29/2/41230 WIENTél. : +43 1 61 61 9 61Fax : +43 1 61 61 9 [email protected]
CHINESHANGHAI PU-JIANG ENERDISINSTRUMENTS CO. LTDN° 381 Xiang De Road3 Floor, Building 1200081 SHANGHAITél. : +86 21 65 21 51 96Fax : +86 21 65 21 61 [email protected]
ESPAGNECHAUVIN ARNOUX IBÉRICA SAC/ Roger de Flor N°293 1a Planta08025 BARCELONATél. : +34 902 20 22 26Fax : +34 934 59 14 [email protected]
ITALIEAMRA SPAVia Sant’Ambrogio, 2320846 MACHERIO (MB)Tél. : +39 039 245 75 45Fax : +39 039 481 [email protected]
MOYEN ORIENTChauvin Arnoux Middle EastPO Box 60-1541241 2020 JAL EL DIB(Beyrouth) - LIBANTél. : +961 1 890 425Fax : +961 1 890 [email protected]
ROYAUME UNIChauvin Arnoux LtdUnit 1 Nelson Ct, Flagship SqShaw Cross Business Pk, DewsburyWest Yorkshire - WF12 7THTél. : +44 1924 460 494Fax : +44 1924 455 [email protected]
SCANDINAVIECA MÄTSYSTEM AB Sjöflygvägen 35SE-183 62 TABYTél. : +46 8 50 52 68 00Fax : +46 8 50 52 68 [email protected]
SUISSECHAUVIN ARNOUX AGMoosacherstrasse 158804 AU / ZHTél. : +41 44 727 75 55Fax : +41 44 727 75 [email protected]
USACHAUVIN ARNOUX INCd.b.a AEMC Instruments15 Faraday DriveDover - NH 03820Tél. : +1 (800) 945-2362Fax : +1 (603) [email protected]
CHAUVIN ARNOUXTest et Mesure190, rue Championnet75876 PARIS Cedex 18Tél. : +33 1 44 85 44 85Fax : +33 1 46 27 73 [email protected]
PYROCONTROLE6 bis, av du Docteur Schweitzer69881 MEYZIEU CedexTél. : +33 4 72 14 15 40Fax : +33 4 72 14 15 [email protected]
10 FILIALES DANS LE MONDE
906
130
118
- Ed.
2 - 0
1/20
18 -
Docu
men
t non
cont
ract
uel -
Car
acté
ristiq
ues à
se fa
ire co
nfirm
er à
la co
mm
ande
- Ph
otos
et s
hém
as n
on co
ntra
ctue
ls.UN CONTACT CENTRALISÉ
Chauvin Arnoux Energy16, rue Georges Besse92182 ANTONY Cedexwww.enerdis.fr
FranceTél. : 01 75 60 10 30Fax : 01 46 66 62 [email protected]
InternationalTél. : +33 1 75 60 10 30Fax : +33 1 46 66 62 [email protected]
Retrouvez l’ensemble de l’offre relais d’automatismes pour répondre à toutes les exigences des secteurs industrie, énergie, ferroviaire…
MANUMESURE45 route de Saint Eugène14130 REUXTél. : +33 2 31 64 51 00Fax : +33 2 31 64 51 [email protected]
Cata
log
ue
gén
éra
l 2
01
8
FR
FRANCEChauvin Arnoux Energy16, rue Georges Besse92182 ANTONY CedexTél : +33 1 75 60 10 30Fax : +33 1 46 66 62 [email protected]
INTERNATIONALChauvin Arnoux Energy16, rue Georges Besse92182 ANTONY Cedex - FRANCETél : +33 1 75 60 10 30Fax : +33 1 46 66 62 [email protected]
SUISSEChauvin Arnoux AGMoosacherstrasse 158804 AU / ZHTél : +41 44 727 75 55Fax : +41 44 727 75 [email protected]
Catalogue général
2018
0000054,6
MANUMESURE9, allée Jean Prouvé92110 ClichyTél. : +33 1 75 61 01 80Fax : +33 1 47 33 28 [email protected]
10 SUBSIDIARIES WORLDWIDEAUSTRIACHAUVIN ARNOUX GES.M.B.HSlamastrasse 29/2/41230 WIENTel.: +43 1 61 61 9 61Fax: +43 1 61 61 9 [email protected]
CHINASHANGHAI PU-JIANG ENERDISINSTRUMENTS CO. LTD3 Floor, Building 1N° 381 Xiang De Road200081 SHANGHAITel.: +86 21 65 21 51 96Fax: +86 21 65 21 61 [email protected]
GERMANYCHAUVIN ARNOUX GMBHOhmstraße 177694 KEHL / RHEINTel.: +49 7851 99 26-0Fax: +49 7851 99 [email protected]
ITALYAMRA SPAVia Sant’Ambrogio, 2320846 MACHERIO (MB)Tel.: +39 039 245 75 45Fax: +39 039 481 [email protected]
MIDDLE EASTCHAUVIN ARNOUX MIDDLE EASTPO Box 60-1541241 2020 JAL EL DIB(Beirut) - LEBANONTel.: +961 1 890 425Fax: +961 1 890 [email protected]
SPAINCHAUVIN ARNOUX IBERICA SAC/ Roger de Flor N°293, 1a Planta08025 BARCELONATel.: +34 902 20 22 26Fax: +34 934 59 14 [email protected]
SCANDINAVIACA MÄTSYSTEM ABSjöflygvägen 35SE-183 62 TABYTel.: +46 8 50 52 68 00Fax: +46 8 50 52 68 [email protected]
SWITZERLANDCHAUVIN ARNOUX AGMoosacherstrasse 158804 AU / ZHTel.: +41 44 727 75 55Fax: +41 44 727 75 [email protected]
UNITED KINGDOMCHAUVIN ARNOUX LTDUnit 1 Nelson Ct, Flagship SqShaw Cross Business Pk, DewsburyWest Yorkshire - WF12 7THTel: +44 1924 460 494Fax: +44 1924 455 [email protected]
USACHAUVIN ARNOUX INCd.b.a AEMC Instruments15 Faraday DriveDover - NH 03820Tél. : +1 (800) 945-2362Fax : +1 (603) [email protected]
A CENTRALIZED CONTACTCHAUVIN ARNOUX190, rue Championnet75876 PARIS Cedex 18 FRANCE
FRANCETel.: +33 1 44 85 44 85Fax: +33 1 46 27 73 [email protected]
INTERNATIONALTel: +33 1 44 85 44 38Fax: +33 1 46 27 95 [email protected]
UNITED KINGDOMCHAUVIN ARNOUX LTDUnit 1 Nelson Ct, Flagship SqShaw Cross Business Pk, DewsburyWest Yorkshire - WF12 7THTel: 01924 460 494Fax: 01924 455 [email protected]
MIDDLE EASTCHAUVIN ARNOUX MIDDLE EASTPO Box 60-1541241 2020 JAL EL DIB (Beirut)LEBANONTel.: (01) 89 04 25Fax: (01) 89 04 [email protected]
USACHAUVIN ARNOUX INCd.b.a AEMC Instruments15 Faraday DriveDover - NH 03820Tél. : +1 (800) 945-2362Fax : +1 (603) [email protected]
CHAUVIN ARNOUX ENERGY 16, rue Georges Besse92182 Antony Cedex - FranceTel. : +33 1 75 60 10 30Fax : +33 1 46 66 62 [email protected] www.chauvin-arnoux-energy.com
ALLEMAGNEChauvin Arnoux GmbHOhmstraße 177694 KEHL / RHEINTél. : +49 07851 99 26-0Fax : +49 07851 99 [email protected]
AUTRICHEChauvin Arnoux Ges.m.b.HSlamastrasse 29/2/41230 WIENTél. : +43 1 61 61 9 61Fax : +43 1 61 61 9 [email protected]
CHINESHANGHAI PU-JIANG ENERDISINSTRUMENTS CO. LTDN° 381 Xiang De Road3 Floor, Building 1200081 SHANGHAITél. : +86 21 65 21 51 96Fax : +86 21 65 21 61 [email protected]
ESPAGNECHAUVIN ARNOUX IBÉRICA SAC/ Roger de Flor N°293 1a Planta08025 BARCELONATél. : +34 902 20 22 26Fax : +34 934 59 14 [email protected]
ITALIEAMRA SPAVia Sant’Ambrogio, 2320846 MACHERIO (MB)Tél. : +39 039 245 75 45Fax : +39 039 481 [email protected]
MOYEN ORIENTChauvin Arnoux Middle EastPO Box 60-1541241 2020 JAL EL DIB(Beyrouth) - LIBANTél. : +961 1 890 425Fax : +961 1 890 [email protected]
ROYAUME UNIChauvin Arnoux LtdUnit 1 Nelson Ct, Flagship SqShaw Cross Business Pk, DewsburyWest Yorkshire - WF12 7THTél. : +44 1924 460 494Fax : +44 1924 455 [email protected]
SCANDINAVIECA MÄTSYSTEM AB Sjöflygvägen 35SE-183 62 TABYTél. : +46 8 50 52 68 00Fax : +46 8 50 52 68 [email protected]
SUISSECHAUVIN ARNOUX AGMoosacherstrasse 158804 AU / ZHTél. : +41 44 727 75 55Fax : +41 44 727 75 [email protected]
USACHAUVIN ARNOUX INCd.b.a AEMC Instruments15 Faraday DriveDover - NH 03820Tél. : +1 (800) 945-2362Fax : +1 (603) [email protected]
CHAUVIN ARNOUXTest et Mesure190, rue Championnet75876 PARIS Cedex 18Tél. : +33 1 44 85 44 85Fax : +33 1 46 27 73 [email protected]
PYROCONTROLE6 bis, av du Docteur Schweitzer69881 MEYZIEU CedexTél. : +33 4 72 14 15 40Fax : +33 4 72 14 15 [email protected]
10 FILIALES DANS LE MONDE
906
130
118
- Ed
. 2 -
01/
2018
- D
ocum
ent n
on c
ontra
ctue
l - C
arac
téris
tique
s à
se fa
ire c
onfir
mer
à la
com
man
de -
Pho
tos
et s
hém
as n
on c
ontra
ctue
ls.UN CONTACT CENTRALISÉ
Chauvin Arnoux Energy16, rue Georges Besse92182 ANTONY Cedexwww.enerdis.fr
FranceTél. : 01 75 60 10 30Fax : 01 46 66 62 [email protected]
InternationalTél. : +33 1 75 60 10 30Fax : +33 1 46 66 62 [email protected]
Retrouvez l’ensemble de l’offre relais d’automatismes pour répondre à toutes les exigences des secteurs industrie, énergie, ferroviaire…
MANUMESURE45 route de Saint Eugène14130 REUXTél. : +33 2 31 64 51 00Fax : +33 2 31 64 51 [email protected]
Cata
log
ue
gén
éra
l 2
01
8
FR
FRANCEChauvin Arnoux Energy16, rue Georges Besse92182 ANTONY CedexTél : +33 1 75 60 10 30Fax : +33 1 46 66 62 [email protected]
INTERNATIONALChauvin Arnoux Energy16, rue Georges Besse92182 ANTONY Cedex - FRANCETél : +33 1 75 60 10 30Fax : +33 1 46 66 62 [email protected]
SUISSEChauvin Arnoux AGMoosacherstrasse 158804 AU / ZHTél : +41 44 727 75 55Fax : +41 44 727 75 [email protected]
Catalogue général
2018
0000054,6
MANUMESURE9, allée Jean Prouvé92110 Clichy - FranceTel. : +33 1 75 61 01 80Fax : +33 1 47 33 28 [email protected]
INDUSTRY MARKET [email protected]
ENVIRONMENT MARKET [email protected]
HEALTH [email protected]
All Manumesure’s sites are certified ISO 9001 for quality management, and ISO 14001 for environmental impact control.
All our measurements have guaranteed traceability through reference standards linked to the SI international system.
Find out more about MANUMESURE at www.manumesure.com
NORTH-EAST
SOUTH
SOUTH-EAST
WEST
LilleRésidence la Magdelaine20, rue du Parc59110 LA MADELEINETél. : 03 20 06 87 39Fax : 03 20 06 33 61 [email protected]
Paris248, avenue des Grésillons Bât B- 1er étage92600 ASNIERES SUR SEINETél. : 01 75 61 01 80Fax : 01 47 33 28 [email protected]
Strasbourg7, rue Jean Monnet67201 ECKBOLSHEIMTél. : 03 88 30 38 86Fax : 03 88 30 15 [email protected]
BordeauxCA Topaze-Domaine de la HéRoute de Léognan Chambéry33140 VILLENAVE D’ORNONTél. : 05 56 75 81 05Fax : 05 56 87 50 [email protected]
ToulouseZ.I de Thibaud31, avenue J-F. Champollion31100 TOULOUSETél. : 05 61 09 77 47 Fax : 05 61 74 85 [email protected]
MarseilleZ.A Verdière 1 3, rue André-Marie Ampère13880 VELAUXTél. : 04 42 75 36 66Fax : 04 42 07 54 06 [email protected]
Annecy6, avenue du Pré de ChallesParc des Glaisins74940 ANNECY LE VIEUX CEDEXTél. : 04 50 64 22 45Fax : 04 50 64 22 [email protected]
GrenobleLes Jardins d’Entreprise de l’Alliance80, rue des Alliés38100 GRENOBLETél. : 04 76 22 50 17Fax : 04 76 33 09 [email protected]
Lyon8, avenue du Dr. SchweitzerZ.I. de Meyzieu69330 MEYZIEUTél. : 04 37 45 05 68Fax : 04 72 04 05 [email protected]
Nantes49, rue Leinster44240 LA CHAPELLE SUR ERDRETél. : 02 40 75 45 22Fax : 02 40 75 46 [email protected]
Tours6, rue du Pont de l’ArcheZ.A. les Granges Galand37550 SAINT AVERTINTél. : 02 47 27 20 15Fax : 02 47 27 83 [email protected]
Pont-l’ÉvêqueReux14130 PONT L’EVEQUETél. : 02 31 64 51 55Fax : 02 31 64 51 [email protected]
The 12 MANUMESURE technical centres
Check out the other companies expertise
Tours
AnnecyLyon
Paris
Lille
Strasbourg
Pont-l’Évêque
Nantes
BordeauxGrenoble
MarseilleToulouse
Contact us: [email protected]
9070
0956
2-Ed
.1-0
4/20
15 –
Non
-con
trac
tual
doc
umen
t.
METROLOGY & REGULATORY TESTING
MANUMESURE possesses a network of experts ready to listen to your concerns. Twelve technical centres with ISO 9001 (quality management) and ISO14001 (environmental management) certification offer various services throughout France and internationally.
> Find all the addresses on the back of this brochure.
> A table at the end of this brochure lists all the COFRAC accreditations.
MANUMESURE works on all types of sites (nuclear, environmental, medical, etc.) thanks to its fleet of mobile laboratories and its teams of specially-trained technicians.
PROXIMITYMOBILITY
FLEET MANAGEMENT
COFRAC ACCREDITATION
With its computerized management system with automatic reminders according to the periodicities defined, MANUMESURE manages instrument fleets for its customers.
The metrology specialistMANUMESURE
COFRAC (Comité Français d’Accréditation - French Accreditation Committee) is an internationally-recognized body which certifies the competence and impartiality of the laboratories to which it grants accreditation.
REFERENCE MATERIALS
M U L T IACTIVITIES
MANUMESURE is the Chauvin Arnoux Group company specialized in metrology and regulatory testing.
It provides metrological verification, maintenance and management of measurement, inspection and test instrument fleets in the laboratory or on customers’ sites. The company also proposes regulatory testing of environmental parameters (emissions of atmospheric pollutants, noise, etc.), personal safety parameters (electrical inspections, etc.) and hazard prevention parameters (thermography, etc.). Its service offering is structured around three major market segments: Industry, the Environment and Health.
MANUMESURE is also a certified training organization which offers training courses adapted to our customers’ requirements in a wide range of technical fields.
MANUMESURE’s advantages
Calibration:N° 2-1035, N° 2-1405, N° 2-1406,N° 2-1310, N° 2-1615, N° 2-1913Test:N° 1-1623, N° 1-1318, N° 1-2000Inspection:N° 3-145Reference materials:N° 1-5650Scope available at: www.cofrac.fr
CONCEPTEUR DE CAPTEURS DE TEMPÉRATURE COMPTAGE, MESURE & PERFORMANCE ÉNERGÉTIQUETEMPERATURE SENSOR DESIGNERS MEETERING, MEASUREMENT & ENERGY PERFORMANCETEST & MEASUREMENT INSTRUMENTS
FRANCEPYROCONTROLE6 bis, av du Docteur Schweitzer69881 Meyzieu Cedex - FranceTel. : +33 4 72 14 15 40Fax : +33 4 72 14 15 [email protected]
MIDDLE EAST Chauvin Arnoux Middle EastP.O. BOX 60-1541241 2020 JAL EL DIB - LEBANONTel: +961 1 890 425Fax: +961 1 890 [email protected]
UNITED KINGDOMChauvin Arnoux LtdUnit 1 Nelson Ct, Flagship Sq, Shaw Cross Business Pk Dewsbury, West Yorkshire - WF12 7THTel: +44 1924 460 494Fax: +44 1924 455 [email protected]
10 SUBSIDIARIES WORLDWIDE GERMANYCHAUVIN ARNOUX GMBHOhmstraße 1 77694 KEHL / RHEIN Tel.: +49 7851 99 26-0 Fax: +49 7851 99 26-60 [email protected] www.chauvin-arnoux.de
AUTRICHECHAUVIN ARNOUX GES.M.B.HSlamastrasse 29/2/41230 WIENTel. : +43 1 61 61 9 61Fax : +43 1 61 61 9 [email protected]
CHINASHANGHAI PU-JIANG ENERDISINSTRUMENTS CO. LTDN° 381 Xiang De Road3 Floor, Building 1200081 SHANGHAITel. : +86 21 65 21 51 96Fax : +86 21 65 21 61 [email protected]
SPAINCHAUVIN ARNOUX IBÉRICA SAC/ Roger de Flor N°2931a Planta08025 BARCELONATel. : +34 902 20 22 26Fax : +34 934 59 14 [email protected]
ITALYAMRA SPAVia Sant’Ambrogio, 2320846 MACHERIO (MB)Tel. : +39 039 245 75 45Fax : +39 039 481 [email protected]
MIDDLE EASTCHAUVIN ARNOUX MIDDLE EASTPO Box 60-1541241 2020 JAL EL DIB(Beirut) - LEBANONTel. : +961 1 890 425Fax : +961 1 890 [email protected]
UNITED KINGDOMCHAUVIN ARNOUX LTDUnit 1 Nelson Ct, Flagship SqShaw Cross Business Pk, DewsburyWest Yorkshire - WF12 7THTel. : +44 1924 460 494Fax : +44 1924 455 [email protected]
SCANDINAVIACA MÄTSYSTEM ABSjöflygvägen 35SE-183 62 TABYTel. : +46 8 50 52 68 00Fax : +46 8 50 52 68 [email protected]
SWITZERLANDCHAUVIN ARNOUX AGMoosacherstrasse 158804 AU / ZHTel. : +41 44 727 75 55Fax : +41 44 727 75 [email protected]
USACHAUVIN ARNOUX INCd.b.a AEMC Instruments15 Faraday DriveDover - NH 03820Tel. : +1 (800) 945-2362Fax : +1 (603) [email protected]
YOUR CONTACTS
FRANCESOUTH-WEST SECTORTelephone: +33 (0)4 72 14 16 31 [email protected]
WEST SECTOR Telephone: +33 (0)4 81 76 02 55 [email protected]
ILE-DE-FRANCE/NORTH-EAST SECTORTelephone: +33 (0)4 81 76 02 54 [email protected]
INTERNATIONALPYROCONTROLE EXPORT DEPARTMENT Telephone: +33 (0)4 72 14 15 40 [email protected]