selective leaching or dezincification
DESCRIPTION
Selective leaching or dezincification explained. Its a type of corrosion and this is a short course about it.TRANSCRIPT
![Page 1: Selective leaching or dezincification](https://reader035.vdocuments.mx/reader035/viewer/2022081505/555ece80d8b42af67f8b562d/html5/thumbnails/1.jpg)
SELECTIVE LEACHING (DEZINCIFICATION)
MUHAMMED LABEEB13MY06
1
![Page 2: Selective leaching or dezincification](https://reader035.vdocuments.mx/reader035/viewer/2022081505/555ece80d8b42af67f8b562d/html5/thumbnails/2.jpg)
CONTENTS
▪ Introduction
▪ Mechanism
▪ Types
▪ Prevention
2
![Page 3: Selective leaching or dezincification](https://reader035.vdocuments.mx/reader035/viewer/2022081505/555ece80d8b42af67f8b562d/html5/thumbnails/3.jpg)
c16f21
Selective LeachingPreferred corrosion ofone element/constituent[e.g., Zn from brass (Cu-Zn)]. Dezincification.
INTRODUCTION
![Page 4: Selective leaching or dezincification](https://reader035.vdocuments.mx/reader035/viewer/2022081505/555ece80d8b42af67f8b562d/html5/thumbnails/4.jpg)
SELECTIVE LEACHING
▪ The removal of one element from a solid solution alloy by corrosion processes.
▪ That element is more susceptible to corrosion than the rest, more active electrochemically and are anodically dissolved in galvanic contact with the more noble elements.
Uniform dezincification
Localized dezincification
![Page 5: Selective leaching or dezincification](https://reader035.vdocuments.mx/reader035/viewer/2022081505/555ece80d8b42af67f8b562d/html5/thumbnails/5.jpg)
AuCuPbSnNiCoCdFeCrZnAlMgNaK
+1.420 V+0.340- 0.126- 0.136- 0.250- 0.277- 0.403- 0.440- 0.744- 0.763- 1.662- 2.363- 2.714- 2.924
metal Vmetalo
mor
e an
odic
mor
e ca
thod
ic
EMF series
![Page 6: Selective leaching or dezincification](https://reader035.vdocuments.mx/reader035/viewer/2022081505/555ece80d8b42af67f8b562d/html5/thumbnails/6.jpg)
Alloy Composition Environment Element removed
Brasses Many waters, especially under stagnant conditions
Zinc
Gray iron Soils, many waters Iron
Aluminum bronzes Hydrofluoric acid, acids containing chloride ions
Aluminum
Silicon bronzes High-temperature steam and acidic species
Silicon
Tin bronzes Hot brines or steam Tin
Gold alloys with copper or silver
Sulfide solutions, human saliva
Copper, silver
Susceptibility to dealloying depends on• Alloy composition• Environment
![Page 7: Selective leaching or dezincification](https://reader035.vdocuments.mx/reader035/viewer/2022081505/555ece80d8b42af67f8b562d/html5/thumbnails/7.jpg)
Dezincification
Occurs in brass alloys that contain more than 15% zinc• Zinc in solid solution within copper crystal lattice
Zinc atoms dissolve into electrolyte
Copper
Zinc
![Page 8: Selective leaching or dezincification](https://reader035.vdocuments.mx/reader035/viewer/2022081505/555ece80d8b42af67f8b562d/html5/thumbnails/8.jpg)
Generally three mechanisms are proposed
1. Dissolution and redeposition mechanism
▪ Entire alloy is dissolved first
▪ More noble metal is replated ( eg. Cu in Brass)
▪ Active metal is leached away ( eg. Zn in Brass )
2. Selective dissolution
▪ One species is selectively dissolved from alloy leaving a
porous residue of more noble metal behind
3. Combination of two methods 8
MECHANISM
![Page 9: Selective leaching or dezincification](https://reader035.vdocuments.mx/reader035/viewer/2022081505/555ece80d8b42af67f8b562d/html5/thumbnails/9.jpg)
Two forms of dezincification
Overall dimensions of the material do not change
Dezincified areas weakened or in some cases perforated
Uniform layer dezincification
Localized (Plug) dezincification
Dezincified layer
TYPES
![Page 10: Selective leaching or dezincification](https://reader035.vdocuments.mx/reader035/viewer/2022081505/555ece80d8b42af67f8b562d/html5/thumbnails/10.jpg)
Uniform dezincification
Bulk electrolyte sufficiently corrosive to promote dealloying
Uniform layer dezincification in brass heat-exchanger tube
Dezincified metal Outer
tube wall
0.500 mm(0.020”)
Courtesy of James J. Dillon. Permission granted by Nalco Chemical Company, 1987.
![Page 11: Selective leaching or dezincification](https://reader035.vdocuments.mx/reader035/viewer/2022081505/555ece80d8b42af67f8b562d/html5/thumbnails/11.jpg)
Localized dezincificationCaused by local increases in electrolyte corrosivity
Changes in electrolyte caused by• Deposit on surface• Local increase in temperature
0.110 mm(0.0042”)
Brass (Cu-30% zinc) exposed to room temperature salt solution for 80 days
Reprinted with permission of ASM International®. All rights reserved.
![Page 12: Selective leaching or dezincification](https://reader035.vdocuments.mx/reader035/viewer/2022081505/555ece80d8b42af67f8b562d/html5/thumbnails/12.jpg)
PREVENTION
▪ Reducing the aggressiveness of the environment (i.e. oxygen removal)
▪ Use less susceptible material:
- 15% Zn (red brass)
- Addition 1% Sn to a 70-30 brass (admiralty metal)
- Addition of As, Sb, P as ‘inhibitor’ (70%Cu, 29% Zn, 1% Sn, 0.04% As)
- Cupronickel (70-90%Cu, 30-10%Ni) for severely corrosive environments.
![Page 13: Selective leaching or dezincification](https://reader035.vdocuments.mx/reader035/viewer/2022081505/555ece80d8b42af67f8b562d/html5/thumbnails/13.jpg)
REFERENCE
Zaki Ahmad – Principles of Corrosion
Engineering and Corrosion Control
Mars G Fontanna – Corrosion Engineering