seanic ocean systems… · custom-machined sub-assemblies for installation and actuation. during...

SEANIC OCEAN SYSTEMSDIGITAL CATALOG / SPRING 2017

A C E N T U R I O N C O M P A N Y

SEANICOCEAN SYSTEMS

2

As we near the mid-year point, it’s clear the market will likely not provide the level of recovery everyone hoped for in 2017. With oil below $50

(bbl/WTI) again, operators will be very selective on which projects they fund and the focus will remain on cost-saving solutions, quality, and safety. Seanic recognizes current market conditions may be the norm for some time to come, which is why we continue to highlight products and services in each publication that we believe embrace those competencies.

In this issue, we feature an article on the refurbishment and upgrade of several Vertical Collet Connector Running Tools used with subsea jumper installations. Due to the vast number of existing subsea structures fitted with proprietary connections that interfaced with these tools, a cost-effective means of restoring and, in some cases, upgrading this mature hardware was needed. Even though cost was a factor, quality and safety was paramount in the final decision.

We also feature our ECB cavitation water blasting system. This system was originally developed many years ago to safely and effectively clean marine growth on the relatively soft materials used on strakes and fairings. Since that time, operators have become increasingly more confident in the ECB’s effectiveness; over the last 5 years, the ECB has become an industry standard for UWILD inspections.

Tom AyarsPresident

In our last issue, we announced that Seanic and sister company UES of Aberdeen had joined forces. Now that UES is stocking Seanic ROV tooling for both rental and sale, UES can provide service to the diving, ROV, and decommissioning industries. This month, we talk about their decommissioning cutting shears and how UES can become a sole source for many of your subsea tooling needs.

Seanic is pleased to announce two new distribution partners. Scanmudring in St. Johns, Newfoundland, and Reliance Subsea in Port of Spain, Trinidad. Both companies will be able to support your ROV tooling needs in their regions.

With summer upon us don’t miss an opportunity to utilize Seanic’s 30’ deep test tank to demonstrate your products. With the success of last year’s Demo Days we’ve decided to continue to offer our tank to others in the subsea industry to demo their products in the test pool for no charge.

We hope you find this publication beneficial and welcome any feedback. On behalf of the Seanic employees around the world, we want to thank you for your continued support.

/ From The President 2017

3

CONTENTS

From the President . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 //

Seanic News . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 //

Featured Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 //

Product Catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 //

Standard ROV Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 //

Engineered Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 //

UES Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 //

Product Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 //

Centurion Group Portfolio . . . . . . . . . . . . . . . . . . . . 106 //

Table Of Contents 2017/ 3

4 / Seanic News 2017

WHAT’S NEW AT SEANIC?

Seanic’s Engineered Solutions Group recently completed the refurbishment and upgrade of several Vertical Collet Connector Running Tools for subsea jumper installations. This 15-year-old equipment had been showing its age after many years of offshore service. As such, it was important to restore this mature hardware due to the vast number of subsea structures fitted with proprietary connections with which they interface. Each structure stands over 16-ft tall and weighs 18 to 20 kips.

The owner’s goal was to bring the equipment up to current industry standards and refurbish them to a level of quality equal to or greater than like-new condition. Seanic was selected due to a combination of reasons that ranged from skilled personnel with first-hand

experience in using the equipment; a level of competence related to engineering, documentation, and design; and an effective facility capable of handling hardware of this type.

Upon receipt of the equipment, quality, engineering, and warehouse personnel worked together to disassemble, catalog, and inspect each component of the structures. Each unit was assigned a

VERTICAL COLLET CONNECTOR RUNNING TOOLS REFURBISHMENT

5Seanic News 2017 /

unique identifier that was then marked on every component as it was carefully removed from the system. Disassembly took place in Seanic’s warehouse, and the bridge crane safely and efficiently removed large sub-assemblies. A detailed review of the original material selection and integrity was conducted to ensure it met owner and industry specifications. Additionally, all weldments were stripped of coating and subjected to Non-Destructive Examination and repairs were made when and where necessary.

The structures contained several custom-machined sub-assemblies for installation and actuation. During the process, Seanic had limited availability or access to OEM documentation, making the repair or replacement of some of the sub-components challenging. Once replacement, repair, and final coating of all weldments were completed, the structures were reassembled. The thorough front-end work of Seanic’s Engineered Solutions Group and quality department eliminated any project or

schedule setbacks.

Final testing included hydrostatic testing of the entire hydraulic system and functioning of all actuators, cylinders, and motors. A final System Integration Test proved functionality of the structure to integrate and operate the connection of a subsea jumper.

To learn more about Seanic’s Engineered Solutions Group, please contact [email protected].


Underwater Engineering Services (UES), Seanic’s sister company in Aberdeen, is ahead of the curve and well established on the growing decommissioning scene.

Both UES and Seanic specialize in the supply of marine and subsea support equipment to the diving, ROV, and decommissioning sectors within the offshore oil and gas and renewables industries. Featuring several products in this catalog, UES built its reputation by being able to deliver the types of pipeline cutting activities required to remove pipes on-site from either topside or subsea.

Over a 10-year period during which the company carried out almost 7,000 cuts both topside and subsea, UES successfully completed a significant number of decommissioning projects within the U.K. Continental Shelf and Norwegian waters and continued to build

its impressive portfolio. They successfully decommissioned materials such as power cables, umbilicals, flowlines, flexible risers, and rigid pipe.

UES utilizes two types of cutting shear. The first was the Verachtert hydraulic

UES: AHEAD OF THE CURVE

CAT-S80 SHEAR (TOP); VERACHTERT HYDRAULIC SHEAR, VHS-60 (BOTTOM)

7Seanic News 2017 /

shear (VHS 60), which is generally used for topside cutting but can also be configured for subsea deployment. This cutter has the largest mouth opening of the two offered, with an 800-mm opening jaw height and 830-mm jaw depth. It delivers a crushing force of 9,850 kN, making it one of the most powerful cutting performers in the sector.

The second cutting shear was the CAT S80, which can also be used for both topside and subsea decommissioning projects. With a jaw opening of 620 mm and jaw depth 820 mm, this has a crushing force of 8,809 kN. For subsea operations, the CAT S80 has two sets of lifting assemblies to enable it to carry out cuts either horizontally or vertically.

Both cutters have dedicated transit frames that can also be used for deck cutting operations. The shears operate at a maximum of 350 bar and, therefore, a suitable Hydraulic Power Unit (HPU) is essential to provide the necessary operating parameters.

Over the years, UES has delivered tailored equipment packages for topside, subsea, or both, and, depending on the configuration, the equipment supplied may consist of cutting shears, hydraulic power units, control cabin, hose deployment reel, and over boarding equipment.

In recent years, engineers at UES delivered a decommissioning campaign for a North Sea operator, which involved using a twin shear package. The project saw the two shears being used simultaneously on the back deck of a vessel, allowing them to pull in twice the volume of umbilical and double the speed of removal.

Each shear utilized a dedicated HPU, allowing them to operate simultaneously. Also included was a heated control cabin to allow the technicians to operate the equipment at a safe distance and monitor the control systems for both the shears and the HPUs.

SEANIC’S DEMO DAYS & STATE-OF-THE-ART TEST TANK Seanic’s Demo Days was such a success in 2016 they are pleased to announce plans to continue with their Demo Day program in 2017. Seanic’s offer provides other companies in the subsea industry the opportunity to access this state-of-the-art test tank at little or no cost as they demonstrate their products to current and potential clients. Several companies took advantage of this offer last year and the turnout was clearly a success. We’re currently accepting applications from vendors to participate in future Demo Days and would suggest you contact Karen North ([email protected] subject Demo Day) to schedule your event.

Seanic’s facility in Katy, TX (near Houston) includes a full-service test tank, giving clients the ability to test their products in a controlled environment in a cost-effective manner. The tank is 50 ft (15m) square, 30 ft (9m) deep which is large enough to wet-test very large subsea hardware, leaving a work class ROV full access from all sides. It’s reinforced 3 ft (0.9m) concrete base, is designed to accommodate heavy items up to 2000lbs/sq ft (9765 kg/sq m) to be tested.


Seanic is excited to introduce their newly formed distributor partnerships with Scanmudring Canada Inc. in St. Johns, Newfoundland and Labrador, Canada, and Reliance Subsea Services in Port of Spain, Trinidad. After extensive research we concluded these two companies were ideal to partner with, due to geographic location, customer relationships and above all capabilities “says Tom Ayars”, President of Seanic Ocean Systems.

“In today’s environment, our clients need the most flexible, proven solutions,” says Jason Price, Managing Director of Scanmudring Canada. “This partnership further demonstrates our proactive approach to customer collaboration, and our commitment to delivering tailor-made solutions that meet specific client needs. With a large roster of highly-effective, proprietary equipment located in Eastern Canada, our clients will benefit from both time and cost efficiencies.”

Looking to the Future

With the full support of Seanic Ocean Systems, both companies have been outfitted with a pool of ROV rental tools and have the ability to sell and support standard tooling rental activity. Both companies will also liaise with clients on behalf of Seanic for engineering design build projects.

About Scanmudring

With more than 17 years’ experience, Scanmudring has advanced as a global leader in the development, manufacture and operation of advanced subsea heavy machinery for harsh environments. Scanmudring specialize in dredging, excavation and construction work for the oil, gas and renewable energy industries, providing unparalleled operational expertise. Scanmudring is dedicated to providing innovative, robust and reliable solutions that are versatile enough to meet the most demanding subsea challenges.

Scanmudring Canada Inc. is a subsidiary of Scanmudring AS (Norway), and services primarily Eastern Canada and the Artic.

Contact:Jason Price, P.Eng. Managing Director, Scanmudring [email protected]

About Reliance

Reliance Subsea Services (Reliance) is a dynamic company created by local and committed professionals to address a growing subsea market. Reliance specializes in tooling and equipment of all types, manpower support and warehouse provisions.

With a new tooling rental and services facility near the Piarco Airport, and with its proximity to local ports, Reliance becomes the first of its kind in providing rapid response support to Oil & Gas operators and service providers throughout the entire Caribbean Region. Combining this service with the ability to provide engineering, project management, fabrication and storage, Reliance strives to ensure the best quality customer service and world class products to guarantee a long-lasting business relationship built on trust.

Contact: Karishma Maharaj Director of [email protected]

SCEANIC WELCOMES NEW DISTRIBUTOR PARTNERS

9Featured Products 2017 /

Seanic’s ECB cavitation cleaning system was developed to gently and effectively remove barnacles and other marine growth from soft or sensitive surfaces, such as strakes and fairings. Unlike traditional 5,000 or 10,000 PSI water blasters, our ECB unit is capable of cleaning subsea objects with enough force to remove barnacles and deposits without causing damage to soft plastic or rubber surfaces. Traditionally, high-pressure water blasters are often ineffective because they aren’t powerful enough or they are too powerful and

damage the object being cleaned. Using cavitation for cleaning has alleviated these issues and allowed Seanic to make an extremely efficient and powerful cleaning machine. Additionally, this one-of-a-kind marine growth removal device has become an industry standard for risers, moorings, and vessel hulls during underwater inspection in lieu of dry docking, or UWILD as it is commonly called.

ECB SPECIALIZED TOOLSCAVITATION WATER BLASTING: EFFECTIVE CLEANING FOR SUBSEA OBJECTS

PLAY VIDEO FOR DEMONSTRATION

PHOTO CREDIT: AIMS INTERNATIONAL

PRODUCT CATALOG

SPRING 2017

www.seanicusa.comA Centurion Group company

SEANIC STANDARD ROV TOOLING


13ROV Tooling 2017 /

ELECTRIC SMART TORQUE TOOLAPI 17H CLASS 1-4

TECHNICAL SPECIFICATIONSREAL-TIME TORQUE LIMITING

Real-time torque limiting gives very accurate torque feedback and control. The tool is ideally suited for both subsea and surface applications requiring up to 2000 ft-lbs of torque.

HIGHLY ACCURATE TORQUE FEEDBACK

As it does not require an HPU for operation, surface testing in the yard or shop environment is easily accomplished. Torque is measured by internal feedback with an accuracy of +/- 2%.

Seanic has designed an Electric Smart

Torque Tool in the tradition of providing

our customers a simple, rugged and

reliable product. The tool has a closed

loop speed/position control system, al-

lowing fine control and angular position

feedback.

Real-time torque limiting gives very ac-

curate torque feedback and control. The

tool is ideally suited for both subsea

and surface applications requiring up to

2000 ft-lbs of torque.

2000 ft lbs MAX TORQUE OUTPUT 120 VAC at 12.5 A max POWER

25 inches LENGTH 120 lbs WEIGHT (AIR)

15 rpm MAX SPEED 15 rpm MAX SPEED

Start/stop; Direction; Speed; Torque Control MOTOR CONTROLS

Latches disengage when power is lost. Same proven latch design as standard Seanic torque tools. Internal electric-driven HPU circuit provides hydraulic power and control.

FULLY AUTOMATED HYDRAULIC-ACTUATED LATCHES

Torque limited by closed loop motor current and strain gauge feedback. Safe Torque Off feature (torque output is immediately disengaged if limit is met).

TORQUE LIMITING AND ALARMING

No changes in accuracy or performance due to pressure and temp changes. Single 3/4” hose houses and protects the cable assembly, replacing multiple hydraulic hoses. Dynamic subsea test

jig designed specifically for ETT use available as option.

125:1 TORQUE MULTIPLIER

Calibrated strain gauge feedback within +/-2%; Input current limiting and alarming; Optional communication (isolated RS232, ethernet); Turns counter, torque output, shaft position displayed

topside; Speed limiting alarming; Resolver-based turns counter accurate to less than 1/10th degree of a revolution.

ADDITIONAL FEATURES

14 / ROV Tooling 2017

SMART TORQUE TOOLAPI 17H CLASS 1-4

TECHNICAL SPECIFICATIONS

RUGGED FEATURES

We have retained the mechanical counter as a backup which allows for failsafe operation if the battery is depleted, but also added a digital display that provides real-time torque and turns both subsea and on the surface, via laptop control.

LOW MAINTENANCE DESIGNThe tool can be supplied as a stand-alone smart tool or with a proportional valve pack, laptop and GUI that can limit torques, control speed and direction and log values.

RELIABLE PERFORMANCE

Our robust latch system provides confidence that you are securely locked into the subsea bucket and will stay that way until you choose to disengage. In the case of an unforeseen power failure, our latches are spring-loaded and will retract, allowing you to safely disconnect from the work site.

The Seanic Smart Torque Tool has

retained the rugged features of its

predecessor and added the technolog-

ically advanced features our customers

require.

LATCHES Spring Return

Robust Dogs

17-4 Hardened Fins

WEIGHT 110 lbs/50 kg (air)

85 lbs/39 kg (water)

MECHANICAL COUNTER

Display in Tenths

Large, easy-to-read numbers

Oil-filled, Independently-sealed housing

Allows failsafe operation if battery is depleted or display is compromised

WHAT’S IN THE BOX+ Subsea Display+ Surface Test Jig and Read Out+ #8 JIC Hoses (2)+ #4 JIC Hose+ Comp Bottle with Fittings + Operating & Maintenance Manual+ Electrical Spares+ Mechanical Spares+ 195CC Motor (2)+ 36CC Motor (2)+ 1-4 End Effector and Test Stem+ Cable Between Tool and Display


HI-TORQUE TOOLAPI 17H

TECHNICAL SPECIFICATIONSREMOVABLE 17H CLASS 4 NOSE

Our tool has a removable and exchangeable 17H Class-4 nose that can also be attached to Seanic’s Smart Torque Tool , for a convenient two-in-one functionality.

TWO-IN-ONE FUNCTIONALITYThe hi-torque tool is useful in installing umbilicals and flying leads, opening and closing valves on a Christmas tree, and conjunction with Tool Deployment Units (TDUs).

MECHANICAL TURN COUNTER

A mechanical turns counter, which needs no battery and features highly visible numbers for easy monitoring, eliminates the inherent problems commonly associated with electronic digital counters.

Mechanical (no battery) COUNTER FEATURES

Highly visible numbers

Displays in tenths

Oil-filled, independently sealed housing

72 lbs/33 kg (air) WEIGHT


Seanic Ocean Systems has designed an

API 17H and ISO 13628-8 compliant

hi-torque tool to reliably perform a

multitude of subsea applications.

WHAT’S IN THE BOX

+ Surface Test Jig with Topside Digital Readout

+ Hoses

+ Complete Spares Kit

+ 1 High Torque Motor

+ 1 High Torque Adapter

+ Operating & Maintenance Manual


MATERIALS 316 SS / 6061 T6 AL / Ni-Al-Brz

DIMENSIONS 17”W x 40”L x 14”H

HYDRAULIC REQUIREMENTS

Two open-center directional control valves

MAX OPERATING PSI & FLOW

Pitch cylinder: 3000 psig at .5 gpm

Roll motor: 3000 psig at 1.75 gpm

FLOT WEIGHT 149 lbs/68 kg (air) - 108 lbs/49 kg (water)

PITCH ANGLE 135⁰ (90⁰ down from horizontal, 45⁰ up from horizontal)

ROLL ANGLE 32⁰ either direction (360⁰ optional configuration depending on application)

MAX HANG WEIGHT ON TT

600 lbs

WHAT’S IN THE BOX

+ #8 JIC Hose (2)

+ #4 JIC Hose (2)

+ Spares Kit


FLYING LEAD ORIENTATION TOOL

TECHNICAL SPECIFICATIONSDURABLE DESIGN

The Seanic Flying Lead Orientation Tool (FLOT) provides the operator a durable design with greater versatility and less overall weight, which means you don’t sacrifice valuable payload.

RIGOROUSLY TESTEDSeanic’s FLOT provides the option of roll up to 360° in certain configurations, giving you the ability to dock flying leads in the most difficult of conditions.

BUILT TO FIT SEANIC TORQUE TOOLThis unit has been designed to fit the Seanic’s torque tool, and has been customized or retrofitted for compatibility with many industry-recognized torque tools.

The Seanic Flying Lead Orientation Tool,

or FLOT, is designed and built for ease

of operation and maintenance. The

tool allows for angular and rotational

orientation of a class 4 torque tool to

aid in connection of flying leads subsea.

Simple design allows for customized

configurations. Built-in load holding

valves ensure safe and reliable pitch

control.


SUBSEA TORQUEVERIFICATION UNIT

TECHNICAL SPECIFICATIONSSUBSEA AND SURFACE READINGS

The unit readily attaches to the ROV cage or TMS to provide a reliable assessment of changes in torque output when adjustments are made, without the need to return to the surface.

SIMPLE TORQUE OUTPUT ASSESSMENT

Our verification unit boasts a two-in-one functionality, as it can additionally be used to verify torque adjustments on the surface in place of a normal torque tool test jig.

PURELY HYDRO-MECHANICAL DESIGN

Because it is a purely mechanical piece of equipment, our subsea verification unit has no electronics to fail, batteries to die, wires to break or electrical housings to flood.

WHAT’S IN THE BOX

+ 2,200 ft-lb Gauge (2)

+ 500 ft-lb Gauge (2)

+ Test Stems


Seanic Ocean Systems has a subsea

verification unit that verifies torque

readings of an API 17H Class 1-4

torque tool at depth.

This tool is also available as a dual

gauge unit, subsea switchable between

class 1-2 and 3-4 without the need to

change gauges at the surface. Useful

when multiple tools are being used that

require subsea verification prior to use.

316 L SS MATERIALS

Nickel-Aluminum-Bronze

17-4 SS

API 17H Class 1-2 end effector INTERFACE

API 17H Class 3 end effector

API 17H Class 4 end effector



2,000 ft-lbs MAX INPUT TORQUE


INTELLIGENT VALVE PACK

TECHNICAL SPECIFICATIONSCOMPACT DESIGN

Standard design allows for scaling of valve size and type providing simple rugged function while maintaining compact and light weight form.

CUSTOM SOFTWAREClosed or open loop control, data logging and custom control interfaces are all available options that can be added to the system.

STANDARD OR CONFIGURED TO SUIT Graphical User Interface design can be customized for a wide range of applications.

WEIGHT 87 lb (air)

15 station

68 lb (water)

DIMENSIONS 10 1/4” W x 22” L x 8 3/4” H

FEATURES 15 NG directional control valves, capable of proportional pressure control on 10 stations

Transducers integrated to monitor supply, return and ambient pressure

Clear lid for viewing Diagnostic’s LED’s

Isolated RS232 circuit

Customizable software and valve configurations

30 #4 JIC A/B Outputs; #12 JIC P/T Inputs; Filter included

Seanic Intelligent Valve Packs can be

configured to meet many require-

ments. The pack is designed and built

to operate our Smart Torque Tool, but

can also be configured for other tooling

requirements including FLOT’s and

custom multi-function tools.

REQUIREMENTS Power and Communications:

24 VDC @ 6 amps, RS232

Hydraulic:

3,000 psi @ 20 gpm max


TORQUE TOOL ADAPTERAPI 17H CLASS V


API CLASS IV TO API CLASS V

The real beauty of an API 17H Class V adapter is that no hydraulic connection is required, which allows the API 17H Class V tool to be left in place while other API 17H Class IV duties are being performed.

SPRING-LOADED EFFECTOR (OPTIONAL)

The tool can be purchased with or without a spring-loaded end effector and in latching or non-latching configurations.

Aluminum housing MATERIALS

Steel gear reduction

17-4 SSTL location fins

17-4 SSTL end effectors

Delrin nose

316 SSTL ROV handle

316 SSTL hardware

0-5,000 ft-lbs TORQUE RANGE



Seanic has designed and manufactured

an API 17H Class IV to API 17H Class V

torque adapter for use in all standard

API 17H Class V interfaces.

Using an API 17H Class IV and API 17H

Class V tool on the same dive is very

common.

WHAT’S IN THE BOX

+ Surface Test Jig and Read Out

+ Compensator Bottle Complete with Fittings and Gear Oil

+ Spares Kit



MATERIALS Stainless steel housing

Steel gear reduction

17-4 SSTL location fins

17-4 SSTL end effectors

Delrin nose

316 SSTL ROV handle

316 SSTL hardware

INPUT INTERFACE API 17H Class 4 male end effector (1.5” square drive)

OUTPUT INTERFACE API 17H Class 7 female end effector (3.5” square drive)

API 17H Class 6 female end effector (2.625” square drive)



TORQUE RANGE 5,000-25,000 ft-lbs

TORQUE TOOL ADAPTERAPI 17H CLASS 6/7

TECHNICAL SPECIFICATIONSLATCHING OR NON-LATCHING CONFIGURATIONS

The tool can be purchased with or without a spring-loaded end effector and in latching or non-latching configurations.

NO HYDRAULIC INTERFACE NECESSARY

The tool requires no electrical or hydraulic interface, freeing the ROV to leave it in place and perform other subsea operations.

Seanic has designed and manufactured

an API 17H Class 6/7 torque adapter

for use in all standard API 17H Class

6/7 interfaces.

The tool is ideally suited for any subsea

application requiring up to 25,000 ft-lbs

torque.

WHAT’S IN THE BOX

+ Surface Test Jig and Read Out+ Standard Nosecone+ Class 6/7 End Effector and Test Stem+ Compensator Bottle Complete with Fittings and Gear Oil+ Spares Kit+ Vector Nosecone (optional)+ Operating & Maintenance Manual


17 H/D HOT STABSAND RECEPTACLES


Seanic manufactures and stocks a wide

variety of API/ISO standard hot stabs

and receptacles to meet your needs.

Using the highest quality materials

and stringent quality program ensures

our products perform in the harshest

subsea environment.

Handles are 316 SS MATERIALS

Bodies are Xylane coated Nitronic 60

Female receptacles are Nitronic 50

Nose tips are Ni-Al-Brz

Fittings and fasteners are 316 SS

O-rings are:

70 Durometer HNBR on Dummy Stabs

90 Durometer HNBR on PSI Stabs

WHAT’S IN THE BOX


ROV FRIENDLY COMPLIANT HANDLES 316 SS

All products are accompanied with material certification of US manufacture as well as pressure test reports.

PRESSURE RATINGS TO 20,000 PSI Pressure ranges are from 5,000-20,000psi on all models.

OTHER MATERIALS AVAILABLE UPON REQUEST

Stabs and manifolds conform to API 17D or API 17H (ISO 13628-8) and can be configured with various fitting sizes and types.


MATERIALS Stainless steel

DEPTH RATING Full ocean depth

WEIGHT 11 lbs/5 kg

PADDLE VALVES


CORROSION-RESISTANT

Seanic’s paddle valves, manufactured entirely from durable and corrosion-resistant stainless steel, are designed with hard stops to prevent an ROV from over-torquing and avoid costly damage to the valve stem.

ROV-OPERABLE INTERFACESeanic’s paddle valves meet the industry standard API 17H specifications for ROV interface tooling.

20-YEAR DESIGN LIFEDesigned with longevity in mind, our stainless steel paddle valves resist the damaging effects of subsea corrosion and boast a 20-year design life.

Seanic Ocean Systems offers ROV-op-

erable ball valve interfaces to comple-

ment the wide array of subsea ball,

needle and directional control valves

currently on the market.

Seanic’s commitment to durable design

and construction ensures that your

tools will hold up under the demands of

the subsea environment.

We maintain a constant supply of pad-

dle valves in stock, and can additionally

provide your team with the necessary

valve components to suit your project

needs.

WHAT’S IN THE BOX



Stainless Steel MATERIALS


HDPE



24.5”W x 18”H DIMENSIONS

WHAT’S IN THE BOX


+ Spare Scotch Brite® Pads

+ Spare Hardware

HUB CLEANING TOOLAPI STANDARD OR CUSTOM

TECHNICAL SPECIFICATIONSREMOVES MARINE GROWTH

Seanic Ocean Systems has created a specially designed tool for the removal of fouling and marine growth from wellhead sealing surfaces prior to AX/VX gasket installation.

MANIPULATOR- OR HYDRAULIC-DRIVEN

The hub cleaning tool can be manipulator-driven or built for hydraulic operation, and is available to fit all API standard or other customer-requested hub sizes.

DESIGN ELIMINATES EXPOSED HARDWARE TO WELL BORE

A valuable instrument for subsea construction or drilling work, the hub cleaning tool features no bolts or pieces that could potentially fall into the wellhead, eliminating the risk of costly damage and retrieval efforts.

This tool creates a clean and polished

sealing surface to allow a gasket to

attain a reliable seal, minimizing opera-

tional risks.

Our HUB Cleaning Tool can be built with

a scrubbing surface of various Scotch-

Brite® pads or brushes to further break

up tough marine deposits.


GASKET REMOVAL TOOL AX/VX AND CUSTOM DESIGN

TECHNICAL SPECIFICATIONSRUGGED, LIGHTWEIGHT DESIGN

This tool can be manufactured to accommodate a variety of industry standards or custom gasket sizes.

RELIABLE REMOVAL AND INSTALLATION

Our gasket removal and installation tool, designed to be positioned by the ROV manipulator, efficiently and reliably replaces standard 18 3⁄4-inch AX and VX style gaskets.

CORROSION-RESISTANT ALLOY CONSTRUCTION

The tool is manufactured using 100% corrosion- resistant alloys, ensuring resistance to corrosion damage and years of dependable subsea operation.

WEIGHT (AIR) WEIGHT (WATER)

18 3/4” 61 lbs 54 lbs

16 3/4” 56 lbs 48 lbs

15” 50 lbs 42 lbs

MATERIALS Stainless steel


Seanic Ocean Systems has designed

and manufactured a variety of ring gas-

ket removal and installation tooling that

boasts a rugged yet lightweight design

to perform under the formidable con-

ditions of the deep sea environment. In

addition to the standard configurations

currently in stock, we have engineered

and manufactured custom Max-8 and

Max-14 gasket removal and replace-

ment tool designs that require side

entry to the wellhead (2” and 4” AX).

WHAT’S IN THE BOX

+ AX/VX Tool

+ #4 Size Hose (2)

+ Spare Grip Tape


HIGH-PRESSURE CLEANINGBuilt with longevity in mind, our 5K water blaster requires less frequent gearbox flushing than other similarly powered water blasters on the market.

POWERFUL FLUID INJECTIONIn addition, the blaster can also be used as a high pressure, high-volume pump for rapid and powerful fluid injection.

AVAILABLE FOR RENTALWe maintain a stock of our standard 5K water blaster, and offer the option of customization according to customer needs.


5K WATER BLASTERHIGH-PRESSURE



and manufactured high-pressure

Triplex water blasters for a multitude of

purposes. Common applications include

cleaning marine growth from sub-

sea hardware and structures prior to

inspection and applying high pressure

to break up hard materials in mud for

eased dredging.

#8 JIC hoses for supply and return of the motor

INTERFACE

#6 JIC hose motor case drain

#8 JIC high pressure hose for water nozzle

Input: 3000 psi / Output: 5000 psi MAX PRESSURE

Input: 12 gpm / Output: 4.5 gpm MAX FLOW

100 lbs/45kg (air) - 60 lbs/27 kg (water) WEIGHT

15”W x 27”L x 7”H DIMENSIONS

WHAT’S IN THE BOX

+ Compensator bottle complete with gear and oil fittings

+ Spare strainer+ Wand / turbo nozzle+ Gauge panel+ #8 JIC hose (2)+ #6 JIC hose (1)+ #8 5K JIC hose (1)+ Spares kit+ Operating & maintenance manual


SUPER GRINDER


REMOVABLE AND REPLACEABLE BLADES

Powered by a commonly used and industry-accepted thruster motor, our Super Grinder features removable and replaceable blades to best suit the task at hand.

CUSTOM SIZE OPTIONS

Our standard 20-inch blade is in stock, and can be manufactured in sizes ranging from 6-30 inches, in addition to custom diameters according to project specifications.

RIGOROUSLY TESTED

This rugged and rigorously tested tool is used for decommissioning, storm repair and recovery and for cutting and removal of jumpers and umbilicals to the surface.

MATERIALS 316 SS frame, shroud and hardware

Painted aluminum housing

17-4 drive shaft

Fiber abrasive grinding wheel

Stainless steel


Oil of opportunity

Motor requires A & B connection with #8 JIC

Case drain requires C connection with #10 JIC

Requires open center directional flow valve (1)



OPERATING PRESSURES

Max operation pressure: 3,000 psi

Max flow rate: 20 gpm

WHAT’S IN THE BOX

+ #8 JIC Hose (3)

+ Spare Abrasive Blades (15)

+ Diamond Blades (upon request)


The Seanic Ocean Systems Super

Grinder is a powerful tool for cutting

materials up to six inches in thickness.

Aside from the standard fiber abra-

sive blade, the super grinder can

operate with blade options including

carbide tooth, carbide brazed, and re

rescue-grade blades to suit the most

demanding of subsea cutting needs.


6061 T-6 Aluminum MATERIALS

316 stainless steel

Ampco 45 Nickel-Aluminum-Bronze

Carbon steel (motor)

Polypropylene bristles

Brass or nylon bristles

6 gpm @ 2,000 psi HYDRAULIC REQUIREMENTS

10,000 FSW WORKING DEPTH

WHAT’S IN THE BOX

+ All Hoses Supplied

+ Spare Bristle Pods

+ Citric Acid Pump and Reservoir (as required)


BRUSHING TOOL SINGLE HEAD


CUSTOM-ENGINEERED TO ORDER

Our custom-engineered brushing tool features removable individual bristle pods, eliminating the need to replace the entire brush head when exhausted bristles begin to show signs of wear.

OPTIONAL CITRIC ACID PUMP

The tool can be outfitted with a reservoir and pump to inject citric acid onto the cleaning site through the brush head, ensuring thorough removal of stubborn calcium growth and marine debris.

REMOVABLE BRISTLE PODS

Our custom-engineered brushing tool features removable individual bristle pods, eliminating the need to replace the entire brush head when exhausted bristles begin to show signs of wear. Seanic also offers a standard HUB cleaning tool that has an 18 3⁄4-inch diameter brush head, and can be customized to any dimensions to meet your subsea project specifications.


a powerful brushing tool that cuts

through tough marine growth on jacket

legs, wellheads and other structures to

allow for improved inspection, cutting,

or attachment to subsea structures.

The hydraulic-driven rotary brush, held

by the ROV manipulator, safely and

efficiently cleans growth and accumu-

lated debris on subsea structures. The

brush operates to a working depth of

10,000 FSW.


INPUT Input 3000 psi @ 20-22 gpm

OUTPUT Output 3000 psi @ 14 gpm

WEIGHT 275 lbs (air)

225lbs (water)

MATERIALS 316 SS

Aluminum

DIMENSIONS 30”W x 36”L x 12”H

WHAT’S IN THE BOX

+ Pump Assembly+ Nozzles/Hoses+ Complete Spares Package Includes Fittings, Hos-es, etc.+ Maintenance Tools and Supplies+ Operating & Maintenance Manual+ Spares Inventory List

ECB UNITSCLEANING METHOD

TECHNICAL SPECIFICATIONSSAFE, THOROUGH CLEANING WITHOUT DAMAGE

Using cavitation for cleaning has alleviated these issues and allowed Seanic to make an extremely efficient and powerful cleaning machine for removal of marine growth from vessel hulls, strakes, risers, fairings and moorings.

USED ON STRAKE/FAIRING, UWILD, ETC. Seanic has developed a revolutionary new cleaning method for subsea applications.

RELIABLE, PREDICTABLE RESULTSTraditionally high pressure water blasters are often ineffective because they aren’t powerful enough or they are too powerful and often damage the object being cleaned.

Seanic has developed a revolutionary

new cleaning method for subsea ap-

plications. By combining low pressure/

high volume pumps and inertial cavi-

tation nozzles, Seanic has developed a

safe and effective ROV powered clean-

ing system. Traditional high pressure

water blasters can be ineffective or

even destructive if used improperly. The

Seanic ECB systems are a field proven

solution for removing marine growth

from vessel hulls, strakes, risers, fair-

ings and moorings.


MULTIPURPOSE PUMPS10K-15K PSI


3.8:1 RATIO

Seanic’s multipurpose pumping system has a 3.8:1 ratio and is capable of pumping fluids to a working pressure of 10,000 psi.

CORROSION-RESISTANT DESIGN

The pump is rated for use in 10,000 FSW and is made of corrosion-resistant materials, making it robust and reliable for subsea use.

RATED TO 10,000 FSW DEPTH

The pump is ideally suited for hydrate remediation work, as it can draw a powerful 22 in HG vacuum.

316 SS housings, SS fittings MATERIALS

Ni-Al-Brz piston



10,000 psi, 2.5 gpm max flow MAX OUTPUT PRESSURE

Max HPU input pressure: 2900 psi OPERATING PRESSURES

Flow rate not to exceed 8 gal/min

Oil of opportunity HYDRAULIC

Requires one open-center directional flow valve

Pump and tank: #6 JIC fittings CONNECTIONS

Input and output: #4 JIC fittings


36” x 6” x 8” DIMENSIONS

This unique pump has the ability to

pump a multitude of fluids and can

be used for methanol service with no

risk of cross contaminating the ROV’s

supply oil.

These pumps can be delivered with

a variety of different reservoirs and

directional control valves rated for 10k

and 15k service.

WHAT’S IN THE BOX

+ Spares Kit



DYNASET PUMP5K WATER BLASTER


COMPACT SIZE

Common applications include cleaning marine growth from subsea hardware and structures prior to inspection and applying high pressure to break up hard materials in mud for eased dredging.

RELIABLE PERFORMANCEAt it’s core, the hydraulically driven Dynaset intensifier pump uses filtered sea water and a ROV friendly Turbo nozzle.

LOW MAINTENANCEIn addition, the pump can be used as a high pressure, high flow for rapid and powerful fluid injection.

WEIGHT 25 lbs (air) / 15 lbs (water)

DIMENSIONS 18 in W x 19 in D x 7 in H

MATERIALS Primarily Aluminum 6061-T6 and Stainless Steel

HYDRAULIC CONNECTIONS

Requires (1) open center directional control valve(s). P and T connections are #12 JIC male fittings.

INPUT PRESSURE & FLOW

3,000 PSI @ 30 gpm max

OUTPUT PRESSURE & FLOW

5,000 PSI @ 5.5 gpm

WHAT’S IN THE BOX

+ Spare Hoses

+ Rebuild Kit


The 5k Dynaset Water Blaster pump

system was designed for high pressure,

subsea cleaning.


PH PROBE

TECHNICAL SPECIFICATIONSACCURATE SUBSEA PH READINGS

The probe also features a logging function that can record pH readings for later download and analysis.

BATTERY-POWEREDOur pH probe is entirely self-contained and battery powered, with an extensive battery life of approximately 72 hours.

HIGHLY VISIBLE LED DISPLAYThe probe’s red LED display is highly visible in dark water, and features an energy-conserving sleep function that can be switched on or off by flashing the ROV lights.


10,000 FSW/3,000 MSW DEPTH RATING

Approx 72 hours display time BATTERY LIFE

54 in L x 7 in diameter (largest) DIMENSIONS

Stainless steel body and display housing

MATERIALS

UHMW probe

Seanic Ocean Systems has designed a

pH probe used to measure and monitor

pH in the subsea environment, partic-

ularly useful in drilling operations and

the prediction of cement returns. The

probe, which features a handle for ease

of manipulation by the ROV, monitors

pH levels within a wellbore and assists

in the accurate prediction of cement

return.

WHAT’S IN THE BOX

+ Spares Kit

+ Solutions



TORQUE RECEPTACLEAPI 17D


NICKEL ALUMINUM BRONZE CASTING

Seanic API Torque Receptacles are available in three materials to ensure sound interface and reliable performance with your subsea equipment. We offer torque receptacles in corrosion- resistant stainless steel, durable carbon steel, or a self-lubricating Nickel-Aluminum-Bronze alloy.

NO PAINTING REQUIREDWhile standard torque receptacles are currently in stock, Seanic’s API Torque Receptacle can be modified as needed to meet customer demands for specific projects or custom orders.

BUILT TO API 17H

Our superior quality torque receptacles conform to API 17H and ISO 13628-8 standards, and can be machined to match any custom bolt pattern—providing a seamless connection and guaranteed compatibility with your ROV.

MATERIALS 1020 Carbon Steel

316 L Stainless Steel

Ni-Al-Brz

WHAT’S IN THE BOX

Seanic Ocean Systems maintains a

supply of standard and customizable

API Torque Receptacles in a variety

of materials to interface with an ROV

torque tool. Our bearingless torque

receptacles can be panel-mounted for

reliable docking, valve rotation, and

interface with a torque tool or other

subsea equipment to prevent costly

damage to installation valves.


LINEAR VALVE OVERRIDE TOOLLVOT/LAOT

TECHNICAL SPECIFICATIONSROV-DEPLOYABLE The LVOT and lockouts are designed to be deployed through ROV intervention.

THREE LOCKOUT SIZE OPTIONS Custom lockout positions are available.

MANUAL VALVE OVERRIDE

In addition to the LVOT, three different size lockouts are supplied to lock the linearly actuated valve at the 2-inch, 5-inch and 7-inch positions. The LVOT and lockouts are designed to be deployed through ROV intervention.



3000 psi (rod side) MAX PRESSURE

9115 psi (piston side)

13 inches STROKE

Spring retracts plunger FAIL SAFE

170,000 lbs MAX FORCE

Spring return retracts plunger INTERFACE

The Seanic Linear Valve Override

Tool (LVOT ) is designed to API 17H

specifications to manually override

linearly-actuated valves that have lost

hydraulic control power and returned to

the closed or fail-safe position. Custom

lockout positions are available.

WHAT’S IN THE BOX

+ Type A, B and C Heads+ Intensifier Panels+ Lockouts (as needed)+ Spares+ Spares+ Hoses+ API 17H Hot Stab Receptacle (Dual Port or Single Port)+ Operating & Maintenance Manual


GL4 REGAN LATCH RELEASE TOOL


MATERIALS 316 L SS, carbon steel or aluminum

STROKE 3”

OUTPUT 3,000 psi @ 2 gpm

RELEASE FORCE 18,000 lbs



SIMPLE, RUGGED AND RELIABLE

Our GL4 Regan Latch Release Tool, designed to be held in the ROV manipulator, enables an ROV to mechanically attach to the top of a guidepost and enable its removal using hydraulic power to compress and disengage the latching mechanism that holds the guidepost in place.

BUILT TO FIT GL-4 LATCHESThe GL4 Regan Latch Release Tool’s hydraulic supply can be either plumbed directly to the ROV, or supplied in the form of a hot stab attachment.

Seanic Ocean Systems manufactures a

GL4 Regan Latch Release Tool for the

disconnection and removal of subsea

guideposts.

The damaged or non-functional

guidepost can then be retrieved to the

surface along existing guide wires.

WHAT’S IN THE BOX

+ Spares Kit

+ Hoses



DOCKING CONEAPI/ISO STANDARD

TECHNICAL SPECIFICATIONSAPI/ISO STANDARDS

Our docking cone is built to API/ISO standards guaranteeing ROV compatibility, no matter the application.

HYDRAULICALLY-ACTUATED

The hydraulically actuated docking cone connects to a receptacle and serves as an interface between objects for such purposes as tree and piletop landings, pile alignment, docking to subsea tooling systems, and as a component installed on a Tool Deployment Unit (TDU).

GUARANTEED ROV COMPATIBILITYSeanic can also provide the matching female mating receptacle that can be mounted on the tree or pile for orientation and simplified interface purposes.

316 Stainless Steel MATERIALS

Anodized Aluminum Housing

Delrin Nose Cone


16 lbs/7 kg (water)

3,000 psi @ 1 gpm OPERATING PRESSURE

1/4in JIC SIZE FITTINGS

Seanic Ocean Systems manufac-

tures and maintains a supply of API/

ISO standard docking cones for the

stabilization and alignment of an ROV

modular skid.

WHAT’S IN THE BOX

+ Hoses

+ Spare Seals Kit



MATERIAL 316/304/17-4 SS

CAPACITY 20,000 lbs max lift

DIMENSIONS 12” L x 12” W x 8 1/2” D

WEIGHT 55 lbs (air)

45 lbs (water)

CYLINDER MAX PRESSURE RATING

3,000 psi

SUBSEA LOAD CELL

TECHNICAL SPECIFICATIONSINSTALLS BETWEEN LIFTING LINE AND LOAD The subsea load cell installs directly between the lifting line and load itself.

EASILY MONITORED BY AN ROVThere are no electrical or battery operated components and the load cell can be easily monitored by an ROV with the large, easy-to-read display.

NO ELECTRICAL/BATTERY OPERATED COMPONENTS

The cells are manufactured of all stainless components and are completely oil-filled so corrosion is not a problem.

The Seanic load cell is designed to

provide accurate, reliable load readings

for the lifting of subsea structures. This

unit is a simple, rugged and reliable

alternative to some of the other high

tech options on the market.

Calibration certifications are good for

one year and can be quickly recertified

annually. The subsea load cell comes

with 2x gauges: one 0-10000 lb cali-

brated and one 0-20000 lb calibrated

and can be interchanged quickly.

WHAT’S IN THE BOX

+ Spare Gauge



SUCTION CUPSTICKY FOOT

TECHNICAL SPECIFICATIONSSIMPLE, RUGGED DESIGN

Its high level of suction and grip ensures that an ROV will stay reliably in place when attached to smooth surfaces such as a vessel hull or pipeline.

LOW COSTThe sticky foot can be deployed by the ROV manipulator or hard-mounted to the vehicle in an appropriate location for the job.

CHOICE OF ROV HANDLES

While we have a variety of sizes in stock, our sticky foot can be manufactured to custom shape or size specifications, load holding capacities, and suction levels to ensure reliable performance under any conditions your ROV may encounter.

250 mm SUCTION CUP BELLOWS


6061 T-6 Aluminum MATERIALS

316 SS

Rubber

Ampco 45 Ni-Al-Brz

Carbon steel (motor)

Seanic Ocean Systems designs and

manufactures a suction cup sticky foot

that can be built to custom sizes or

suction levels to assist in station-keep-

ing and lifting smooth-surface objects.

9 gpm @ 2,000 psi HYDRAULIC INPUT REQUIREMENTS

250 gpm OUTPUT REQUIREMENTS



12” x 12” x 20” DIMENSIONS


MATERIALS 6061-T6 Aluminum body/handles

Delrin nose piece

316 SS fittings

Buna-N rubber bladder

Buna-N rubber solid seal is also available

WEIGHT 45 lbs (air)

38 lbs (water)

DIMENSIONS 32 in L

13 in OD at handle

SUCTION PILE INTERFACE STAB

TECHNICAL SPECIFICATIONSSECURE MOORING AND ANCHOR

Our stabs can be outfitted with pressure sensors, providing more accurate feedback than gauges and reducing the risk of damage or costly pile collapse.

BUILT TO-ORDEROur suction pile interface stabs are built to order, can be customized to any size, and are rigorously tested onshore to assure product quality and reliable performance at depth.

INFLATABLE SEAL

Seanic’s’ custom-engineered design features an optional inflatable seal to overcome common sealing problems associated with irregularly painted or corroded surfaces inside the stab interface of most suction piles. This provides a secure fit and the ability to tighten the O-ring in the event of rust or scale buildup.

Seanic Ocean Systems manufactures

an ROV friendly suction pile stab

primarily used during the installation of

suction piles.

The stab is also available with a rubber

flap seal option, eliminating the need

for the additional hydraulic power used

to iflate the bladder.

WHAT’S IN THE BOX

+ Spare Bladder

+ Gauge



VORTEX DREDGE KIT

TECHNICAL SPECIFICATIONSSALVAGE/MARINE SCIENCE OPERATIONS

The low hydraulic consumption leaves enough hydraulic supply on most ROV’s to utilize a purpose built jetter unit for effective soil breakup.

WROV CONSTRUCTION AND DRILL SUPPORT

Environmental concerns are addressed through the high efficiency, low energy demand hydraulic system negating the need for external compensators.

4 IN TO 6 IN AVAILABLE

This is a completely modular system with many installation options for a variety of ROV’s. The true 4 inch performance with minimum 3.89 inch internal diameter reduces blockages and operates on a lower hydraulic flow.

19 gpm (minimum) FLOW REQUIREMENTS

22 gpm (optimum)

2400 psi (minimum) PRESSURE

4500 psi (maximum)

2800 psi (optimum)

99 lbs / 45 kg (air) WEIGHT

WHAT’S IN THE BOX

+ www.vortexdredge.com

The most powerful 4 inch ROV and

diver dredge in the world is available for

rent. The Vortex has a removal rate per-

formance more commonly seen in the

6 inch dredges. Vortex do not supply

dredges as a combination jetter/dredge

unit, with the belief that it is better to

create the most powerful inlet suction

and combine that with an actual high

pressure jetter unit.


DRILLING 6” (150mm) (3/4” shank) maximum diameter annular cutter

HYDRAULIC Requires 3 open centered directional control valves

(4 valves if using optional Slug Ejector function)



WHAT’S IN THE BOX

+ Spare Annular Bits

+ Hoses

+ Spare Motor


MAG DRILL

TECHNICAL SPECIFICATIONSHANDLES UP TO 6 IN DIAMETER CORE DRILL

Our Mag Drill is rated for 10,000 FSW and can easily cut holes into any flat or round steel structure with an annular cutter of up to 6 inches in diameter, at various depths-of-cut.

UP TO 4 1/4 IN HOLE DEPTHThis tool is custom engineered and built to meet customer specifications, and can be customized according to hole diameter and drill depth to suit project needs.

ATTACHES TO ROUND OR FLAT SURFACES

Seanic Ocean Systems designs and manufactures a Mag Drill that allows an ROV to attach a drill to any metallic subsea surface to cut holes of varying diameters.

The drill is mounted to the metallic

work site by energizing a lifting magnet

using a hydraulic cylinder as the actua-

tor. The powerful magnet holds the drill

in place to perform precise cuts for the

purposes of decommissioning, salvage,

pinning, flooding or venting.


316 SS valve and fittings MATERIALS

Aluminum sample bottle

Flexible PVC collection tube

Compressed gas: 77.7 cu-ft/2.2cu.m BOTTLE CAPACITY

Water: 2.93 gal/11.1 L

Pressure: 3000 psi

WHAT’S IN THE BOX

+ Sample Bottle Assembly

+ ROV Handle

+ Various Relief Valve Springs

+ Spare Funnel

+ Spare Flex Hose


SUBSEA SAMPLE BOTTLE ASSEMBLY

TECHNICAL SPECIFICATIONSCONFIGURABLE

The Subsea Sample Bottle Assembly is used to collect samples of gas bubbles/ fluid from on or near the sea floor.

SAFE AND EASY TO OPERATEThe Subsea Sample Bottle Assembly uses differential pressure to create a vacuum which will allow the gas bubbles/ fluid samples to be captured in the sample bottle subsea.

AVAILABLE FOR RENTAL OR SALE

The Subsea Sample Bottle Assembly is not intended to identify the cause of or source of the gas bubbles/ fluid at the operation site, only to collect samples in a safe and easy way for future analysis.

The Seanic Standard Sample Bottle

system is a safe, simple and effective

tool for gathering subsea samples. Cus-

tom configurations and interchangeable

collection interfaces makes it the right

choice for subsea sampling.


SPECIFICATIONS 10,000 PSI @ 5 GPM

2-20 Gallon Reservoirs

4 Point Lifting Slings and Fork Pockets

230/460v/60Hz Electric Motor

DIMENSIONS 76 x 56 x 86

3800 lbs

WHAT’S IN THE BOX


DUAL FLUID HPU

TECHNICAL SPECIFICATIONS3 STATIONS

The Dual Fluid HPU can deliver 10k and 5gpm of either water glycol or traditional mineral based oils.

EACH STATION HAS PRESSURE AND FLOW CONTROL

This unit was built to fill a demand for both hyperbaric chamber testing of ROV tooling as well as providing constant volume flow for high pressure water glycol applications.

Seanic has designed and built a new

Hydraulic Power Unit that is very

unique. The use of a check ball pump

and an electric motor was the differ-

ence between a standard oil HPU that

can’t pump the Water Glycol and the

air driven pumps usually used in this

application.


316L or Epoxy Coated Steel MATERIALS

Varies According to Customer Requirements

WEIGHTS & DIMENSIONS

Hot Stab, Paddle Valve, Gauges, Torque Receptacles, LVOT Heads or

Flying Leads

INTERFACE OPTIONS

WHAT’S IN THE BOX


INTERVENTION PANEL

TECHNICAL SPECIFICATIONSAPI/ISO COMPLIANT All panels and components will be under API Guidance to ensure ROV friendliness.

SIMPLE, RUGGED, RELIABLEOur staff has years of experience designing and building this equipment, providing you the confidence it will be done right the first time, every time.

CONFIGURABLE INTERFACE POINT FOR ROV

Seanic can custom design and manufacture ROV Intervention Panels per customer requirements. These can include Hot Stabs and Receptacles, ROV Torque Receptacles, Ball Valve Actuators and Gauges.

Seanic Intervention Panels can be

precision water jet cut from 316 L

Stainless Steel or from Carbon Steel

and painted with a 3 part epoxy process

able to withstand long term subsea

exposure.


WEIGHT 345 lbs (air)

280 lbs (water)

DIMENSIONS 43”W x 27 1/4”D x 78”H

FEATURES Clamping range of 12-18” OD

Maximum cut depth of 11 1/2”

DEPTH RATING Infinite depth

HIGH TORQUE MOTOR

Provides 6,000 in-lb torque

MAX PRESSURE 3,000 psi

MAX FLOW 20 gpm

30 INCH SAW

TECHNICAL SPECIFICATIONSSTREAMLINE CLAMP DESIGN

Through this streamlined design, the 30 inch saw provides maximum cut depth with minimal clamping support.

ROV HANDLES FOR HORIZONTAL AND VERTICAL

The clamp design holds the grinder steady ensuring straight cut and preventing blade binding in both horizontal and vertical positions.

OPTIONAL SUPPORT SHOESDiameter range is 12 inches to 18 inches OD with adapter shoes allowing diameters as small as 4 inches.

Seanic introduced the 30 inch saw to

resolve cutting through a single jumper

and eliminating concerns of aligning

multiple cuts.

The clamp design is retroactive, so all

previously purchased 20 inch Super

Grinders can be added to the clamp,

and is easily removed for standalone

applications. The clamp portion may be

used with multiple Seanic Cutting Tools

including both the 30 inch and 20 inch

Super Grinders as well as other cutting

and drilling accessories.

WHAT’S IN THE BOX

+ Spares Kit


SEANIC ENGINEERED SOLUTIONS


47Engineered Solutions 2017 /

ROV SHACKLECUSTOM-ENGINEERED


Seanic Ocean Systems designs and

manufactures a variety of hydraulic

ROV actuation kits for shackles ranging

from 5-500 tons for the purpose of

lowering or lifting heavy equipment to

or from the sea floor without cutting

lifting wires.

ROV shackles adhere to DNV 2.7-1

standards to ensure compatibility for

your subsea needs.

WHAT’S IN THE BOX

+ Dummy Poly Stab

+ API 17H Hot Stabs (optional)

+ Hoses (optional)


HYDRAULICALLY OPERATED

Constructed from an alloy steel and designed for simple operation through the use of an ROV manipulator, this tool enables an ROV to make or break shackle connections hydraulically when adding subsea hardware to a field, landing manifold or other subsea construction.

MECHANICAL OVERRIDE CAPACITY

Seanic’s actuation kits for shackles are built with a mechanical override capacity, in order to make or break shackles without the need for hydraulic power.

CUSTOM-ENGINEERED TO ORDER

Our ROV operable shackle conversions are custom-engineered according to customer specifications, and we have the ability to adapt any shackle to make it ROV-friendly.

WEIGHT (AIR)* WEIGHT (WATER)* DIMENSIONS*

360 lbs/163 kg 311 lbs/141 kg 50” x 14” x 25” 120T

984 lbs/446 kg 910 lbs/412 kg 64” x 14” x 30” 200T

1282 lbs/582 kg 1102 lbs/500 kg 74” x 19” x 36” 400T

*Weights and dimensions for example models shown. ROV shackles can be manufactured in sizes ranging from 5-450 T.

Alloy steel; Stainless steel parts for hydraulic actuators MATERIAL

48/ Engineered Solutions 2017

FLEX JOINT CLEANING TOOLROV COMPATIBLE

TECHNICAL SPECIFICATIONSWORKCLASS ROV COMPATIBLE

The unique deployment system of the tool allows it to be used on any industry-recognized work class ROV.

INTERCHANGEABLE TOOL TRAYSThe tool is designed with interchangeable tool trays, which provide the option to work with various inspection cameras, lasers, temperature probes and cleaning tools.

RELIABLE CLEANING AND INSPECTION

The purpose of the tool is to thoroughly clean the underside of the flex joint by removing excessive marine growth from the elastomer, allowing for optimal inspection.

APPROX WEIGHT 800 lbs/363 kg (air)

~ 20 lbs/9 kg (water)

HYDRAULIC REQUIREMENTS

10 gpm at 3000 psi

Four Open-center Directional Control Valves

MOVEMENT Rotates 190⁰ to 260⁰ in either direction

Brush pole moves up and down and tilts forward and backward to reach corners/transition areas

Transit tray moves pole closer to or away from the riser

WHAT’S IN THE BOX


+ For information regarding what is packaged with this tool, please call Seanic.

The flex joint cleaning tool was de-

signed to clamp around steel catenary

risers with pipeline diameters ranging

from 6 to 24 inches.

The tool is operated by a Seanic tech-

nician through the use of a joystick and

tooling computer with GUI interface

inside the ROV control van.

49Engineered Solutions 2017 /

SEA CHEST COVERSMULTIPLE SIZES



and manufactured ROV-installable Sea

Chest Covers in a variety of sizes, used

for UWILD and for marine maintenance

activities on subsea platforms. During

a UWILD the external hull must be

cleaned and inspected, in addition to

the replacement and/or repair of inter-

nal systems inside the hull.

ROV-FRIENDLY

Seanic’s Sea Chest Covers are used to plug the open flange during inspection and maintenance campaigns. The Sea Chest Cover operation and functionality is imperative to the successful sealing o of the internal hull while personnel and equipment are inside performing the inspection and maintenance.

DEPENDABLE SEALING

The differential pressure at the sea chest flange provides a sealing mechanism allowing for the seal face of the Sea Chest Cover to stay in place and prevent seawater from entering into the sea chest flange. Clamping mechanisms on the sea chest covers provide additional security for the connection and sealing force. An internal bladder on the sea chest is inflated using a seawater injection pump providing an internal sealing element as a secondary measure to prevent any additional seawater from entering the hull in the event of a slow failure of the primary face seal.

EFFICIENT MARINE MAINTENANCE

The design of Seanic’s Sea Chest Covers is ROV friendly, and capable of being deployed and installed efficiently. Seanic’s API 17H FLOT and Class 1-4 torque tool is used to deploy and lock the Sea Chest Cover onto the sea chest flange.

50 / UES Products 2017

UES PRODUCTS


UES Products 2017 / 51

ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 [email protected] [email protected] [email protected] [email protected] [email protected] Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e [email protected] | w www.uesltd.net

GENERAL DESCRIPTION

UES Standard Electric HPU

Supplied mainly for use with our large range of underwater tools, but also suitable for other applications

Primary structure manufactured in accordance with DNV 2.7‐1

TECHNICAL SPECIFICATION

Max Flow 75 l/min @ 60Hz operation

Max Pressure 320 bar @ 35 l/min 60 Hz operation

Motor 22kW WEG 4 pole 3ph 380/440v 50/60Hz

Starter Star Delta in SS enclosure

Filtration MP Filtri pressure, return & drain

Cooler Bowman seawater heat exchanger

Reservoir 200 litre, low oil & high temp trips

Frame 4 point lift in accordance with DNV 2.7‐1

Dimensions 1492 x 800 x 1615 mm

Weight 1,000 kg

Certification Full certification package for MPI, slings, shackles & load test

Hydraulic Power Pack

MODEL: 22kW



GENERAL DESCRIPTION

UES ATEX Zone 1 Electric Hydraulic Power Unit

Supplied mainly for use with our large range of underwater tools, but also suitable for other applications

Primary frame manufactured in accordance with DNV 2.7‐1


Max Flow 140 l/min @ 145bar, 60Hz operation

Max Pressure 320 bar @ 50 l/min 60 Hz operation

Motor 36kW WEG Ex II 2G EEx d IIB T4 4 pole 3ph 380/440v 50/60Hz

Starter Star Delta in Ex II 2GD EEx d II B T5 enclosure

Filtration Ikron pressure, return & drain


Reservoir 300 litre, low oil & high temp trips


Dimensions 1650 x 900 x 1870 mm H

Weight 1,500 kg


ATEX Zone 1 Hydraulic Power Pack

MODEL: Z1 36kW



GENERAL DESCRIPTION

High powered saw designed for dimensional cutting of metal or masonry materials

Suitable for cutting concrete, structural steel and pipe

10” Abrasive, Diamond or TCT wheel can be fitted

Fitted with an adjustable shoe to allow alterations to cut depth


Capacity 10” Disc

Arbor 1”

Flow 38‐57 L/min

Pressure 105‐140 Bar

Weight 10.4kg

Length 495mm

Width 280mm

Porting 8 SAE

Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings

Hydraulic Cut‐Off Saw

MODEL: C023



GENERAL DESCRIPTION

Ideal for cutting pipe, flexible risers, cables & umbilical

Suitable for topside & subsea operations


Model Caterpillar S 80

Jaw Opening Height 623 mm

Jaw Opening Depth 840 mm

Base of Jaws Height 525 mm

Max Flow 200 L/min

Max Pressure 350 Bar



Weight 6000 kg. 8000kg w/ frame

Hydraulic Shear Cutter MODEL: CAT S80



GENERAL DESCRIPTION

Suitable for all coarse and bulky materials

Hydraulic arms are individually driven, thereby ensuring that even the bulkiest material is securely gripped

Designed to handle a variety of different bulk materials such as scrap, waste, rock, slag and logs

Grab can be operated from a standard HPU and powered Umbilical reel


Arm Capacity 0.8m3

Payload 3.5T

Weight 920 kg

No. of Arms 4

Pressure 200 bar

Height closed 1885 mm

Height open 1575 mm

Width closed 1610 mm

Width open 2420 mm Tools supplied as standard with whips and Industry Standard ¾” Wing type Q.D. Couplings

3.5Te Demag Peel Grab



GENERAL DESCRIPTION

Basic Rotary Torque Tool conforming to API 17D Class 1‐4

Robust, no frills tool operable by diver with a suitable hydraulic supply

Direction control valve is close mounted to the torque tool and cross line relief valves are incorporated to allow

torque setting in both CW and CCW rotation


Interface Class 1‐4

Max Torque 2,700 Nm

Speed 0 ‐ 20 rpm

Flow 0 – 25 l/min

Pressure 175 bar Max

Weight 26kg (in water)


Handle Front and rear w/lift point

Porting 1/2” BSP

Tools may be supplied and used in conjunction with UES Torque Manifold and Torque Verification Unit. Supplied as standard c/w 1.5m whips and ¾” Q.D. Couplings

Diver Torque Tool MODELS: KIS17D4



GENERAL DESCRIPTION

Portable hand held tool, designed for use by a diver or ROV

Primarily used for grinding and cutting operations

Suitable with various discs; Abrasive, Diamond, and Polishing Discs

Can also be fitted with Wire & Nylon brushes


Capacity 7” or 9” Disc

Speed 2700 rpm

Arbor 5/8” UNC

Flow 15‐38 l/min

Optimum Flow 34 l/min

Pressure 70‐175 bar

Weight 6.8 kg

Length 230 mm

Width 230 mm

Porting 8 SAE

Tool supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings

Hydraulic Grinder MODEL: GR29



GENERAL DESCRIPTION

Primarily used to deploy hoses, cables & umbilicals for subsea operations

Can be fitted with a twin flow rotary union to power subsea hydraulic tools


Capacity 300 m Twin Hose Umbilical

Max Pull 1000 kg

Flow 15 – 60 l/min

Pressure 200 bar

Connection 6 m hoses c/w Q.D. Couplings

Drum Dimensions

Core 800 mm

Flange 350 mm

Width 800 mm

Dimensions

Length 1770 mm

Width 1770 mm

Weight 1500 kg Tare, 3000 kg Gross

Certification Full certification package for hose test, MPI, slings, shackles & load test

Hydraulic Reel MODEL: HR300



GENERAL DESCRIPTION






Arm Capacity 0.2m3

Payload 5T

Weight 600 kg

No. of Arms 5

Pressure 200 bar


Height open 1280 mm

Width closed 900 mm

Width open 1500 mm Tools supplied as standard with whips and Industry Standard ¾” Wing type Q.D. Couplings

5Te Peel Grab



GENERAL DESCRIPTION

Portable hand held tool, designed for diver use

Primarily used for grinding weld seams and de‐burring holes in steel work

Can additionally be fitted with rotary wire brushes and a variety of abrasive and polishing discs

Can also be adapted for ROV application


Speed 9450 rpm

Arbor 6 mm Collet

Flow 15‐40 l/min


Weight 4 kg

Length 350 mm

Width Nose 65 mm

Width Body 91 mm

Porting 8 SAE

Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings.

Hydraulic Peanut Grinder MODEL: PG04



GENERAL DESCRIPTION

Heavy duty wire cutter designed for use in severe working conditions

Hydraulically operated anvil for easy ROV deployment

Lightweight aluminium construction

Integrated interlock ensures that the blade cannot activate until the anvil is fully deployed

Long life blade ensures that tool maintenance is kept to a minimum

Integrated hydraulic intensifier and internal relief valve


Cutting Capacity (Wire Rope) 75 mm Dia. & 1960 N/mm2 grade

Water Depth Any

Max Input Pressure 210 bar

Weight Approx. 43 kg

Height 517 mm

Width 176 mm

Length 390 mm (max, anvil out)

Wire Rope Cutter MODEL: RCV75HD



GENERAL DESCRIPTION



Robust plated steel and stainless steel construction

All steel components are electroless nickel plated to resist corrosion


Suitable for wire rope, cables and umbilicals

Optional intensifier panel is available



Water Depth Any

Max Input Pressure Main Cylinder 690 bar

Max Input Pressure Anvil 210 bar

Height 703 mm

Width 252 mm

Max Length (Anvil Out) 514 mm

Weight (Approx) 125 kg

Wire Rope Cutter MODEL: RCV115



GENERAL DESCRIPTION



Robust plated steel and stainless steel construction

All steel components are electroless nickel plated to resist corrosion


Suitable for cutting wire rope, cables & umbilical

Optional intensifier panel is available



Water Depth Any

Max Input Pressure Main Cylinder 690 bar

Max Input Pressure Anvil 210 bar

Height 867 mm

Width 277 mm

Length (Max) 592 mm

Weight (Approx) 240 kg

Wire Rope Cutter MODEL: RCV155


ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES

+44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 [email protected] [email protected] [email protected] [email protected] [email protected]

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e [email protected] | w www.uesltd.net

GENERAL DESCRIPTION

Unique hydraulically controlled chain caliper, designed to measure one chain link length.

Lightweight aluminium construction mounted with sheet buoyancy. Supplied complete with digital

displacement readout.

Features an adjustable fixed arm, and a range of dynamic arm options, offering a 200mm measurement

range for chain link lengths of 600 to 1100mm.

Vertical members of the tool engage over the link diameters first, up to a 180mm max. chain diameter. A

range of horse shoe pads can be supplied to engage against smaller diameter chain.


Range 600-1100 mm (200mm increments)

Tool Accuracy +/- 0.3 mm

Max. Chain Dia. 180 mm

Weight in Air 42 kg

ROV Handle Fish tail and flex joint

Max Pressure 30 bar

Max Force 0.4 Te

Hydraulic Interface 4m hose c/w 4JIC ends (alternative end fittings AOR).

Instrument Interface Supplied with Micro Subconn c/w voltage network

UES Ltd. can also supply a range of Go NoGo Gauges for reference chain diameter & interlink measurement, please contact us to discuss your requirements.

ROV Chain Caliper MK3



GENERAL DESCRIPTION

Ideal for drilling holes of up to 100mm diameter in steel structures

Easily adapted to mount onto steel beams and tubular members

Can be secured via clamps, straps or magnets, with various bases to suit a range of applications

Fitted with manual down‐feed and has a spring‐centred control valve for added operator safety


Capacity 100 mm Dia

Speed 50‐250 rpm

Arbor ¾” Dia

Flow 0‐35 l/min


Length 440 mm

Width 230 mm

Height 540 mm

Porting ½” BSP

Weight 25kg


Subsea Drill Rig

MODEL: SDR100



GENERAL DESCRIPTION

Compact & lightweight tool designed to cut soft lines, polypropylene and fibre ropes

Utilises a low pressure supply from the vehicle, eliminating the need for a high pressure intensifier

Constructed from stainless steel and coated alloys to provide the optimum level of light weight and

corrosion resistance


Capacity 54 mm Dia

Pressure 210 bar

Weight 4.52 kg

Length 410 mm

Width 150 mm

Depth 44 mm

Porting ¼” BSP

Softline Cutter MODEL: SL55



GENERAL DESCRIPTION

Heavy duty hydraulically operated soft and fibre line cutting tool

Lightweight aluminum & stainless steel construction

Diver or ROV operable design

Available with detachable handle kit


Capacity 80 mm Dia

Pressure 690 bar

Weight 14.2 kg

Length 647 mm

Width 188 mm

Depth 138 mm

Porting ¼” BSP

Softline Cutter MODEL: SL80



GENERAL DESCRIPTION

Portable, handheld tool for diver use

Ideal for use in tight spaces

Can be adapted for ROV application


Operating Pressure 90‐140 Bar

Working Pressure 90 Bar

Capacity 1.8 kW

Displacement 20‐50 l/min

Free Speed 5500 ± 5% U/min

Peripheral Speed Max 52.2 m/s

Max Disc Size 180mm

Holder and Thread 22.2mm Dia. M14


Weight (without holder & protecting disc) 6.7 kg

Weight (total) 7.6 kg


Spitznas Angle Grinder MODEL: 5” AG



GENERAL DESCRIPTION

An alternative to rotary disc cutters, suitable for a variety of materials

Various pitch and length of blades can be offered depending on the hardness & size of the material

Pipe clamps and other purpose built clamps can be supplied to aid cutting operations

Twist & lever throttle options available


Capacity 290mm Dia

Power 2.8Kw

Flow 15‐50 l/min

Pressure 140 bar

Strokes/min 350

Stroke 60 mm

Weight 6.1 kg

Length 600 mm


Hydraulic Recip Saw

MODEL: Spitznas



GENERAL DESCRIPTION

Medium to heavy‐duty breaker

Ideal for breaking concrete and small rocks, rod diving and tamping

Well balanced tool for minimum operator fatigue

Trouble‐free diaphragm accumulator provides added punch and reduced coil

Feathering on/off valve to control speed makes startup and initial tool placement more reliable

A variety of breaker points available; flat, moil & spade.


BR45 BR67

Capacity 1 in Hex Parallel 6” x 1 ¼” Hex

Weight 25 kg 30 kg

Length 65 cm 68 cm

Width 36 cm 40 cm

Pressure 105‐140 bar 105‐140 bar

Max Back Pressure 17 bar 17 bar

Flow Range 26‐34 l/m 26‐34 l/m

Optimum Flow 30 l/m 30 l/m

Porting 8 SAE 8 SAE

Output 1800 Blows/min 1800 Blows/Min


Hydraulic Breakers

MODEL: BR45 & BR67



GENERAL DESCRIPTION

Portable hydraulic chipping hammer

Ideal for chipping concrete, rock, masonry or coral

Compact, lightweight and powerful with a shock & heat insulated body


Capacity 0.58” x 2 ½” shank steel bits

Flow 26‐34 l/min


Weight 7.25 kg

Length 430mm

Width 80mm

Porting 8 SAE

Tool Steels Wide chisel, Moil point, Flat chisel Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings

Stanley Chipping HammerMODEL: CH15



GENERAL DESCRIPTION

Powerful, lightweight, portable hydraulic drill completely sealed for underwater operation

The drill features a reverse facility

Compatible with a range of drill bits up to 18mm Dia.

Fitted with a trigger guard and a dual position assist handle


Capacity ½” Chuck

Speed 350‐1500 rpm

Torque 27 Nm

Flow 15‐45 l/min


Weight 3.6 kg

Length 230 mm

Width 100 mm

Porting 8 SAE Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings

Stanley Hydraulic Drill MODEL: DL07



GENERAL DESCRIPTION

Hand held tool designed for use by a diver or ROV

Provides exceptional output torque from a compact & lightweight tool


Capacity ¾” Square Drive

Torque 340‐1630 Nm

Flow 15‐45 l/min



Weight 6 kg

Length 240 mm

Width 102 mm

Porting 8 SAE


Hydraulic Impact Wrench

MODEL: IW12



GENERAL DESCRIPTION

Hand held tool designed for use by a diver or ROV

Provides exceptional output torque from a compact & lightweight tool


Capacity 1” Square Drive

Torque 680‐3400 Nm

Flow 25‐45 l/min



Weight 12 kg

Length 370 mm

Width 110 mm

Porting 8 SAE


Hydraulic Impact Wrench

MODEL: IW16



GENERAL DESCRIPTION

Used to confirm operational output from any Rotary Torque Tool conforming to API 17D Class 1‐4 or 17H Hi‐

Torque

Consists of high accuracy torque transducer mounted within a standard Class 1‐4 or Hi‐Torque receptacle

Electronic output from this unit is fed to a 5 digit LED hi visibility display

Rugged housing deep water rated (3000m)


Interface API 17D Class 1‐4 or API 17H Hi‐Torque

Max Torque 2,700 Nm

Input Adaptors:

Class 1 & 2 17.5 mm Square

Class 3 28.6 mm Square

Class 4 38.1 mm Square

17 H 35.0 mm Square

Weight 37 kg

Length 370 mm

Width 500 mm

Height 550 mm

Subsea Torque Verification Unit MODEL: Subsea TVU



GENERAL DESCRIPTION

Diver or ROV operable

Specifically designed to cut large diameter cable, hauser, wire rope and other materials with ease

Twin discs result in reduced cutting times, increased disc life and safe operation


Max Cut Dia. 125 mm

Max Speed 4000 rpm

Flow 34 l/min

Pressure 210 bar

Weight 14.7 kg

Length 550 mm

Width 500 mm

Depth 250 mm

Mounting ‘T’ bar or Fishtail

Twin Disc Cutter MODEL: TDC125



GENERAL DESCRIPTION

Used in conjunction with a UES Torque Tool and displays the number of turns +/‐ made by the Torque Tool output

drive socket, and in addition TC2 displays output torque

Stand‐alone units, and installation does not require complex control system or datalink

Inbuilt light sensors actuate the display when illuminated by ROV or diver light, allowing the instrument to lay

dormant when not required, increasing battery life


Display 5 Digit (14mm) LED +/‐ 999.9

Depth Rating 3,000 m

Battery Rechargeable NiMh D cell

Activation Light sensor

Count reset Magnetic reed switch

Length 200 mm

Width 80 mm

Body Dia. 50 mm

Weight 1.6 kg (Air), 1.1 kg (Water)

Turns Count & Torque Readout MODELS: TC1 & TC2



GENERAL DESCRIPTION

Hydraulic, double acting anvil cutter suitable for cutting wire rope, cables & hoses

Target material is placed in the open jaw of the cutter

Hydraulic pressure supplied from a separate source (ROV or deck HP Pack)

Capable of supplying pressure up to 700 bar, with a 0.5 l/min flow applied to complete the cutting operation


Max Cutting Capacity 38 mm

Wire Rope 38 mm

Height 327 mm

Width 100 mm

Depth 130 mm

Cyl. OD 82 mm

Operating Pressure 700 bar

Swept Volume 145 cc

Approx. Weight 15.2 kg

Hydraulic Cutter MODEL: UHC38



GENERAL DESCRIPTION

Hydraulic, double acting anvil cutter suitable for cutting wire rope, cables & hoses

Target material is placed in the jaw of the cutter and the anvil pin Is then inserted, retaining the material

Hydraulic pressure is supplied from a separate source, typically a deck mounted HPU

A supply pressure of 700 bar and flow of 0.5 l/min is applied to complete the cutting operation



Max Cutting Capacity Ø80 mm

Wire Rope Ø75 mm

Swept Volume 510 cc

Approx Weight 42 kg

Length 416 mm

Outer Diameter 174 mm

Hydraulic Cutter MODEL: UHC80



GENERAL DESCRIPTION






Arm Capacity 3.0m3

Payload 10,000 kg

Weight 3,800 kg

No. of Arms 6

Pressure 200 bar

Flow 40‐80 l/min

Height open 2700 mm


Width open 4180 mm

Width closed 2360 mm Tools supplied as standard with whips and Industry Standard ¾” Wing type Q.D. Couplings

10Te Vantec Grab



GENERAL DESCRIPTION

Ideal for cutting pipe, flexible risers, cables & umbilical

Suitable for topside and subsea operations


Model Verachtert VSHS60

Jaw Opening Height 800 mm

Jaw Opening Depth 830 mm

Base of Jaws Height 718 mm

Max Closing Force 9850 kN


Max Pressure 350 bar



Weight 6500 kg

Hydraulic Shear Cutter

MODEL: VHS60



GENERAL DESCRIPTION

Purpose built to provide a constant tension capability with up to a 12 Ton maximum back tension

Correct spooling procedures prolongs life of umbilical and reduces risk of damage during operations

Operated from a control panel mounted on the unit

Power is supplied from a Hatz Silent Pack diesel engine making the tensioner a standalone system


Max Back Tension 12T

Max Line Speed 20 m/min

Drum Size 1800 OD x 500 mm Wide

Hydraulic Power Unit Hatz 44.1kW Diesel, Tandum Dowty Gear Pumps, Air Blast & Seawater Coolers

Controls Local Directional Control Valve & Tension Control Circuit

Operating Monitoring Digital Readouts for Cable Tension, Speed & Length

Frame Welded Universal Column skid, c/w lift points, fork pockets and tiedown weld plates

Overall Dimensions 4000 x 2000 x 2350 mm H

Weight 7500 kg

12 Te Tensioner


ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR POWER SOLUTIONS SAFETY & TECHNICAL UNDERWATER ENGINEERING HYDRAULICS LIMITED SERVICES +44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1224 781555 +44 (0)1358 789808 [email protected] [email protected] [email protected] [email protected] [email protected] Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e [email protected] | w www.uesltd.net

GENERAL DESCRIPTION

Designed to provide hydraulic power and control for Hydraulic Cutter during “Black Ship” situations

Quickly and effectively supplies power up to 630 bar to operate release mechanisms

Features built in 7.5 kW HPU

75L accumulator capacity


Electrical Supply 7.5 kW, 440 V Accumulator Capacity 75 litres Charge Pressure 300 bar Intensifier Ratio 4:1 Max Outlet Pressure 630 bar Length 1226 mm Width 1020 mm Height 1510 mm Weight 900 kg Gross

Accumulator ER System

MODEL: AER75



Hydraulic A‐Frame

GENERAL DESCRIPTION

UES Hydraulic Powered A‐Frame

Configured to suit a variety of applications depending on requirements

Complete with integrated control panel

Full deployment package with HPU & Winches available on request


SWL 4000kg

Approx. Weight 2500kg

Approx. Dimensions

Length 4700mm

Width 2200mm

Height (stored) 2900mm

Height (max) 4300mm



GENERAL DESCRIPTION

Diesel hydraulic power pack

Supplied mainly for use with our large range of underwater tools, also suitable for other applications


Max Flow 130 l/min @ 1800 rpm 145 l/min @ 2000 rpm

Max Pressure 320 bar

Pump Kawasaki K3VL80/B‐1NRKM‐P0/1‐H4 80cc/rev variable displacement, pressure and torque control

Motor Hatz –M4L air cooled diesel 1500/2000 rpm

Starter 12v Electric

Filtration MP Filtri pressure, Stauff return & suction


Reservoir 300 litre, level temperature gauge

Fuel Tank 200 litre (244g/kWh @ 50% consumption)

Frame Steel channel base, box section corner posts, 4 point lift

Dimensions 1900 x 1000 x 1400 mm h

Weight 1800 kg wet


Hydraulic Power Pack MODEL: Hatz 45kW



GENERAL DESCRIPTION

Designed for the safe over‐boarding of cables, hoses & umbilicals

Standard design incorporates top rollers to ensure that the product is securely captured within the sheave

Support frame available for deck installation


Line Pull 10,000 kg

Bend Radius 780 mm

Max Diameter 50 mm

Height 2097 mm

Diameter 1610 mm

Radius To Inner Sheave 780 mm

ROV Sheave

MODEL: DS780‐10



GENERAL DESCRIPTION

Primarily used to deploy air, hydraulic or Broco service umbilicals for subsea operations

If required, can be fitted with a twin flow rotary union or electrical slipring

Inverter controlled electrical drive provides a step‐less variable speed operation


Capacity 300 m Twin Hose Umbilical

Max Pull 750 kg – (600kg) continuous

Line Speed 20 m/min

Drive 5 kW Inverter Drive

Supply 415/440 V, 50/60Hz

Drum Dimensions

Core 800 mm

Flange 350 mm

Width 800 mm

Dimensions

Length 1770 mm

Width 1770 mm

Weight 1500 kg Tare, 3000 kg Gross

Control Manual Joystick

Certification Full certification package for hose test, MPI, slings, shackles and load test

Electric Powered Reel MODEL: HR300E



GENERAL DESCRIPTION

Ideal for subsea use to make holes for bolts & shackles in shape steel, flat plates etc.

Provides a safe, diver friendly alternative to drilling holes



Max Throat Depth 70 mm

Max Punching Thickness 16 mm Mild Steel 6 mm Stainless Steel

Max Punching Diameter 24 mm

Hole Marking Time 11.8 Seconds

Allowable Max Pressure 68.65 MPa (700kgf/cm2)

Max Output 464 kN (47tF)

Ram Stroke 25 mm

Mass (Weight) 25.5 kg

Hydraulic Hole Punch

MODEL: HD07



GENERAL DESCRIPTION

Portable cutter, ideal for steel sections, power cables and umbilical

Designed for use on deck or subsea

Powered directly from a high pressure power pack or from a pressure intensifier

Ideal for rapid abandonment cutting (DP Run‐off) when used with a UES Accumulator package


Cutting Force 220 Te


Max Blade Opening 205mm

Dimensions 677 x 264 x 1015mm

Weight 300kg

Hydraulic Cutter MODEL: HGC200



GENERAL DESCRIPTION

Hydraulic deployment reel featuring built in 15kW Hydraulic Power Unit

Primarily used for deployment of hoses, cables & umbilicals for subsea operations

Can be fitted with twin flow rotary union to power subsea hydraulic tooling, using built in HPU


Capacity 300m Twin Tooling Umbilical Max Pull 1000 kg Flow 15-60 l/min Pressure 200 bar Drum Core Dia. 800mm Drum Flange Dia. 1500mm Drum Width 800mm HPU Motor 15kW Motor WEG 4 pole, 3ph, 380/440v 50/60Hz Motor Starter Star Delta in SS Enclosure Cooler Bowman Seawater Heat Exchanger

Reservoir 200 L, low oil & high temp trips Frame Welded steel channel skid, box section protection frame, c/w

forklift pockets, tie-down plates & 4 point lift in accordance with DNV 2.7-1

Frame Dimensions 1770 x 1770 x 1880(H) mm

Weight ~ 3700kg (Gross)

Certification Full certification package for MPI, slings, shackles, load test & hosing supplied as standard

HPU & Reel



GENERAL DESCRIPTION

Portable hand held tool

Lightweight, powerful and easy to manoeuvre, ensuring ease of operation

Can be used with Diamond or Abrasive discs


Speed 4300 rpm

Power 5.2 kW

Disc Size 400 mm

Disc Type Diamond or Abrasive

Cutting Depth 145 mm

Flow 35‐42 l/min


Weight 8.3 kg

Length 770 mm

Width 175 mm

Porting ¼” BSP

Tool supplied as standard with 1.5m whips and S/S fittings

Husqvarna Cut Off Saw MODEL: K2500



GENERAL DESCRIPTION

Uses industry standard MiniBooster intensifier and is of a robust compact design for easy installation into an ROV

Fitted with an integrated safety circuit that automatically bleeds excess pressure, due to temperature or depth

variations, back to tank

Inlet and Outlet pressures can be accurately monitored and the outlet is fitted with a factory set relief valve for

added safety


Max Outlet 690 Bar 2 LPM

Max Input 172 Bar 14 LPM

Intensifier Ratio 4:1

Water Depth Any


Weight in air 10 kg

Weight in water 7 kg

Intensifier Panel MODEL: HP690A40



GENERAL DESCRIPTION

Suitable for spooling wire/umbilical bundles onto winches and cranes under tension

Up to 3T back tension

Integrated diesel hydraulic power unit

May also be used to spool onto storage drums


Max Drum Capacity 3200 mm Max Drum Dia.

2500 mm Max Drum Width

30 te Max Payload

Max Drum Torque 36kNm

Max Back Tension 3T

Shaft Size 120 mm Dia.

Integral HPU Perkins Diesel, David Brown Pump, Pall Pressure Filter, Air Blast & Seawater Coolers. 210 bar, 80 l/min

Controls Directional Control Valve, Tension Control Circuit, Optional Spooler Guide Frame control circuit

Frame Welded Universal Column skid, c/w lift points, fork pockets and tiedown weld plates

Overall Dimensions 5000 x 2400 x 2110 mm H (3350 mm H drum filled)

Weight 7000 kg

Certification Full certification package is supplied for the unit, in accordance with all current legislative standards

Drum Spooler



GENERAL DESCRIPTION

Suitable for handling hose umbilical bundles and cables for many applications

Drum can be split to allow installation of various bundles


Drum Dimensions Core 1067 mm Dia. Flange 2275 mm Dia. Drum Width 1650 mm

Hydraulics Max Pressure 210 bar Flow up to 80 l/min (7rpm)

Max Line Pull 5000 kg

Motor/Brake Hagglund, 11084cc/rev, HD62‐111000‐A0‐R0‐00‐00

Control Walvoil SD 18/2 Motor Spool spring centred. Relief valve set to 110 bar (3te)

Rotary Union Optional – Slew ring bearing 340 mm ID

Couplings Supply & Return 1” Parker 61 Series, Drain ½” ISO7241B

Frame Welded steel Channel skid, Box section top lifting frame – Pad eyes x 4


Weight 6500 kg Tare, 10,000kg Gross

Certification Full certification package for hose test, MPI, slings, shackles & load test

Large Hydraulic Reel

MODEL: Hagglund



GENERAL DESCRIPTION

Hand held drill provides unrivalled power for both wet and dry diamond drilling applications

Built in torque limiting valve results in little or no kickback or snatch


Capacity 100 mm Dia.

Flow 20 l/min


Operating Speed Mag 5 – 600 rpm

Mag 10 – 1000 rpm

Mag 15 – 1500 rpm

Weight 8 kg (without core bit)

Length 410 mm (without core bit)

Noise Level 83 dB Free running at 1m

Core bit connection ½” BSP Female

Options Water Flush Swivel


Magnum Core Drill MODELS: 5, 10 & 15



GENERAL DESCRIPTION

Diver operated twin brush cleaning tool

Unique design means it is equally efficient on both tubular and flat surfaces

A wide variety of brushes are available to cater for different types of marine growth

Can be configured for ROV application


Flow 40 l/min

Pressure 140 bar

Weight in Air 23 kg

Weight in Water 1 kg Buoyant

Depth Rating 70 m

Min. tube Dia. 450 mm


Max Brush Dia. 300 mm


Marine Cleaning Tool MODELS: MC212



GENERAL DESCRIPTION

Ideal for installation on deck, on offshore vessels and platforms

Driven by an electro‐hydraulic power unit

Compact design, mounted on a dedicated subframe grillage

Designed and manufactured in accordance with Lloyd’s lifting appliances in a marine environment


Capacity 1.28Te at 14.5m

Hydraulic Reach 14.5m

Length Stowed 2.95m

Height Stowed 3.01m

Base Footprint 2.43m x 2.43m

Winch 2 Te

Max Reach 14.5m @ 1.25Te

Controls Local & Radio Remote

Hydraulic Power 37kW, 270 bar

Slewing Angle Continuous

Weight 6000kg

Certification Full certification package for MPI, slings, shackles, load and pull test

Melcal Marine Crane

MODEL: FL35T5



GENERAL DESCRIPTION

Designed for the safe over‐boarding of cables, hoses & umbilical


Radius 700mm

Load Capacity 3000kg

Length 1310mm

Width 405 B/Flanges

Weight 600kg

Mounting Weld Plates

Certification Full certification package provided

Roller Chute

MODEL: RC700



GENERAL DESCRIPTION

Designed for the safe overboarding of cables, hoses and umbilical


Line Pull 2000 kg

Bend Radius 800 mm

Max Diameter 80 mm

Sheave Length 1567 mm

Sheave Height 828 mm

Sheave Thickness 218 mm

Roller Sheave

MODEL: RDS 808‐2


GENERAL DESCRIPTION

• Dirty work pack base unit housing a Dynaset 520

• Entirely flexible configuration, options include :

5 station 485 solenoid valve pack

3 Station pilot operated valve pack

Internal or external comps


Hydraulic Supply 30 l/min at 520 bar max

Accumulator Capacity P.O.A.

Output Pressure 520 bar max

Max output flow 30 l/pm

Frame All stainless assembly

Dimensions 804 x 600 x 200

Weight 26 kg , buoyancy available


Dirty Work Pack

ATR EQUIPMENT SOLUTIONS ATR LIFTING SOLUTIONS ATR MARINE SOLUTIONS ATR POWER SOLUTIONS UNDERWATER ENGINEERING SERVICES

+44 (0)1224 222777 +44 (0)1224 826662 +44 (0)1224 826662 +44 (0)1224 775050 +44 (0)1358 789808 [email protected] [email protected] [email protected] [email protected] [email protected]

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e [email protected] | w www.uesltd.net



GENERAL DESCRIPTION

Suitable for handling ropes and cables for many applications

Max cable diameter 30mm

Complete with integrated Hydraulic Power Unit


Drum Dimensions 508mm Dia. Core 760mm Dia. Flange 1036mm Width

HPU 55kW Electric; 380/415/440v ph3 50/60Hz 4 pole, WDF250MH Vickers Hydraulic Pump, PVH98QIC‐RSF‐IS‐10‐C25V‐31 Reservoir capacity – 360 litres Working Pressure 250 bar. Flow setting – 120 l/min (Max. Flow 135 l/min)

Max Line Pull 3000kg Bare Drum

Winch Drive Motor Volvo, F12‐030‐MF‐CHC Motor displacement – 30cc/rev

Brake/Gearbox Brevini CTD3150

Control Danfoss PVG120 (Optional remote control)

Spooling Adjustment 9.4mm‐25mm Diameter, plc control

Frame Welded steel Channel skid, Box section top lifting frame – Pad eyes x 4


Weight 3000kg Tare, 5000kg Gross


Hydraulic Winches

MODEL: SONAR WINCH



GENERAL DESCRIPTION

3” NB suction dredge utilizing the lightweight efficient TP03 Trash Pump as its motive power

Capable of moving large volumes of liquid with concentrations of solids up to 25% running from a typical ROV

hydraulic supply

Optional jetting lance can be used in difficult soil conditions to fluidise the material and make it easier to dredge

Can be adapted for diver operation


Pump Flow 1688 LPM water Up to 3” solids

Pump Connections 4” Camlok Discharge, 3” Camlok Suction c/w Heliflex Hoses & ROV Suction Head

Hydraulic Connections 8JIC Supply & Return 4JIC Pilot

Inlet Flow 27 l/min

Inlet Pressure 210 bar Max


Weight 30kg (in Air)

Tools supplied as standard with 3m Suction and Discharge hoses and 3m whips w/ JIC connections

ROV TP03 Trash Pump

MODELS: TP03



GENERAL DESCRIPTION

Suitable for pulling loads of up to 15Te

Wire capacity of 250m

Powered from an independent Hydrualic Power Unit


Manufacturer Zollern

Model ZHP 4.29

Max Line Pull 15Te on layer 6

Line speed: 0‐14 m/min

Drum Dimensions 672mm Core Dia. 1120mm Flange Dia. 530mm Drum Width

Wire Capacity 250m x 32mm

Hydraulic Supply 150 l/min @ 250 bar Max

Control Local directional & tension control

Brakes Dual Failsafe Mult‐disc Brake

Hydraulic Motors 2 off SAI GM1‐250 Radial Piston

Dimensions 1426 x 1230 x 1165mm H

Weight 3500kg Tare, 4500kg Gross

Hydraulic Winches

MODEL: 15Te Zollern Winch

PRODUCT INDEXEngineered SolutionsFlex Joint Cleaning Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 //ROV Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 //Sea Chest Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 //

Standard ROV Tooling5K Water Blaster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 //17 H/D Hot Stabs & Receptacles . . . . . . . . . . . . . . . . . . . . 21 //30 inch Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 //AX/VX Gasket Removal Tool . . . . . . . . . . . . . . . . . . . . . . . . . 24 //Brushing Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 //Docking Cone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 //Dual Fluid HPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 //Dynaset Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 //ECB Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 //Flying Lead Orientation Tool . . . . . . . . . . . . . . . . . . . . . . . . . 16 //GL4 Regan Latch Release Tool . . . . . . . . . . . . . . . . . . . . . . . 34 //Hub Cleaning Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 //Intelligent Valve Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 //Intervention Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 //Linear Valve Override Tool . . . . . . . . . . . . . . . . . . . . . . . . . . 33 //Mag Drill. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 //Multipurpose Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 //Paddle Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 //PH Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 //Subsea Load Cell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 //Subsea Sample Bottle Assembly . . . . . . . . . . . . . . . . . . . . . 41 //Subsea Torque Verification Unit . . . . . . . . . . . . . . . . . . . . . 17 //Suction Cup Sticky Foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 //Suction Pile Interface Stab . . . . . . . . . . . . . . . . . . . . . . . . . . 38 //Super Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 //Torque Receptacle API 17D . . . . . . . . . . . . . . . . . . . . . . . . . . 32 //Torque Tool Adapter 17H Class 6/7 . . . . . . . . . . . . . . . . . . 20 //Vortex Dredge Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 //

Torque ToolsElectric Smart Torque Tool API 17H Class 1-4 . . . . . . . . 13 //Hi-Torque Tool API 17H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 //Smart Torque API 17h Class 1-4 . . . . . . . . . . . . . . . . . . . . . 14 //Torque Tool API 17H Class V . . . . . . . . . . . . . . . . . . . . . . . . . 19 //

UES Products12Te Tensioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 //3.5Te Demag Peel Grab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 //5Te Peel Grab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 //10Te Vantec Grab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 //Accumulator ER System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 //ATEX Zone 1 Hydraulic Power Pack . . . . . . . . . . . . . . . . . . 52 //Dirty Work Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 // Diver Torque Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 //Drum Spooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 // Electric Powered Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 //HPU & Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 // Husqvarna Cut Off Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 // Hydraulic A-Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 //Hydraulic Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 // Hydraulic Cut-Off Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 // Hydraulic Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 // Hydraulic Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 // Hydraulic Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 // Hydraulic Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 //Hydraulic Hole Punch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 //Hydraulic Impact Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 //Hydraulic Impact Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 //Hydraulic Peanut Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 //Hydraulic Power Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 //Hydraulic Power Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 //Hydraulic Recip Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 //Hydraulic Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 // Hydraulic Shear Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 //Hydraulic Shear Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 //Hydraulic Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 // Hydraulic Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 // Intensifier Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 // Large Hydraulic Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 // Magnum Core Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 // Marine Cleaning Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 // Melcal Marine Crane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 //

Roller Chute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 // Roller Sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 // ROV Chain Caliper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 //ROV Sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 //ROV TP03 Trash Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 // Softline Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 //Softline Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 //Spitznaz Angle Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 //Stanley Chipping Hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 //Stanley Hydraulic Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 //Subsea Drill Rig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 //Subsea Torque Verificaation Unit . . . . . . . . . . . . . . . . . . . . 75 //Turns Count & Torque Reader . . . . . . . . . . . . . . . . . . . . . . . . 77 //Twin Disc Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 //Wire Rope Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 //Wire Rope Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 //Wire Rope Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 //


www.conserveplc.com

www.jackswinches.com

www.atrgroup.co.uk

www.rentairoffshore.com www.seanicusa.com

www.tristarwater.com.au

www.sthyd.com

www.miningcamps.com.au

www.atrgroup.co.uk/services/underwater-engineering-

services/

Centurion Group Limited provides equipment rental and specialist services on a global scale. We provide our customers with superior value by virtue of our experienced people and our unique ability to provide one rental solution via our portfolio companies. We combine the scale, breadth and capability of our collective rental solutions to drive efficiencies for our customers globally.

THE CENTURION GROUP PORTFOLIO OF COMPANIES

SEANICOCEAN SYSTEMS

Seanic Headquarters25310 Clay RoadKaty, TX 77493United [email protected]

Seanic UES UK OfficeWest Pitmillan Business CentreNewburgh, Ellon AB41 6ALUnited Kingdon+44 1358 [email protected]

Seanic Singapore Office8 Taus View SquareSingapore, 637574+65 6863 [email protected]


seanic ocean systems… · custom-machined sub-assemblies for installation and actuation. during...

Documents