scope of supply - lab equipments

of 21

Engineering & Systems Rev 0 26.1.2014

Business Development

SCOPE OF SUPPLY

Laboratory Equipment, Hail project

Objective: Supply and Commissioning of Lab Equipment.

Qty & Application: As mentioned in the Part-A of Annexure - 1.

Project location: Hail, Saudi Arabia

Quotation basis: CIF, Dammam

Power supply: 380V 60Hz

Specification: As mentioned in the Part-B of Annexure-1.

Terms & Conditions:

Technical Terms:

1. Three years warranty with parts & labour

2. Calibration, Commissioning & start up

3. Efficient after sale service

Payment terms:

1. 15% Down payment against Bank Guarantee

2. 60% Upon delivery of goods

3. 25% After successful commissioning

Commercial terms:

1. Delivery time = 12 Weeks

2. Delay penalty 1% per week after 13th week, maximum up to 5% of the contract

value

Kindly send your quotations to:

Jaffar Bijli, Production Manager, Engineering & Systems Manager Rowad Plastic Group Email: [email protected] Tel: +966 11 265 1966 Extn 2333, Fax: +966 11 265 1973 P O Box 29452, Riyadh 11457, Kingdom of Saudi Arabia

Annexure -1 follows..

mailto:[email protected]

of 21



Annexure -1

Part A: Equipment, Quantities & Applications

S.No Equipment Name Qt Application

1 Fully Automated Melt Flow Rate (MFR)

1 To analyze the raw material to get indication about the melt flow of the material, which helps the process

2 Moisture analyzer 1 To analyze the water content in the raw material (pellets) and extruded material that were cooled down in water

3 Weighting Scale 2 Raw material weighing for sample preparation (0 - 220g)

4 Weighting Scale 2 Raw material weighing for sample preparation (0 - 3000g)

5 Floor Weighting Scale 1 Raw material weighing for sample preparation (50g - 32000g)

6 Pellet Size Analyzer 1

Raw material analysis to determine the variation in the pellet size, tail and defects that will help to set the processing conditions and monitor the quality of the raw material received

7 Colormeter 1 Measuring the color of the raw material and the products

8 Density Buoyancy method

1 Raw material analysis for mass balance of the product

9 Density Gradient Column 1 Raw material analysis for mass balance of the product

10 Vacuum Oven 1 drying of raw material and additives at low temperature for various analysis

11 Oven 2 drying of raw material and additives for various analysis and volatile content analysis

12 Tear Tester 1 Tear strength of the film product as quality control measurement

13 Thickness profile Film 1 Thickness of the film product as quality control measurement

14 Haze, Transparency & Gloss

1 Optical analysis as a quality inspection tool for the film products

15 Oxygen permeability 1 barrier property measurement of the film product for oxygen

of 21



16 Water vapor permeability 1 barrier property measurement of the film product for water vapor

17 Dart drop 1 Film strength analysis as a quality inspection of the film product

18 Carbon dioxide permeability

1 barrier property measurement of the film product for CO2

19 Gel Counter 1 Analysis of surface defect in quantitative manner for the film product

20 Friction tester 1 Analysis of the film product quality by measuring the surface roughness

21 Fully automated Impact tester

1 Analysis of the product (Pipe, Tank and Pallet) for its impact strength at various temperature

22 UTM Tester 1 Analysis of the product for tensile and flexural property (stiffness of the material)

23 Band saw 1 Cutting and shaping samples prepared by compression molding to specific dimension as per ISO and ASTM standards

24 Notching device 1 Notching specimen that have been prepared by compression molding for analysis according to ISO and ASTM standards

25 Die Puncher 1 Shaping specimen out of prepared plastic sheets by punching it according to ISO and ASTM standards

26 CNC milling machine 1 Computer Numeric Control milling machine to prepare required shapes out of finished products to be analyzed according to ISO and ASTM standards

27 Compression press 1 Heating and forming sheets out of the pellet under pressure to prepare samples for analysis according to ISO and ASTM standards

28 Precision specimen cutter 1 To prepare strips for impact, tensile and flexural tests according to ISO and ASTM standards

29 Strip cutter 1 Preparing strips from film products for tensile and elongation property according to ISO and ASTM standards

30 Water purification system 1 Required as temperature control devices for the density, water chiller, water bath and water permeation equipment

31 Hot plate stirrer 1 To prepare solution mixture for the density gradient and the water vapor permeability tester

of 21



32 Chambers for Cooling samples

1 Conditioning of different samples at different temperature to be analyzed by different techniques

33 Microtome 1 Slicing tool to prepare thin specimen for pigment dispersion by microscope

34 Desiccator 1 drying samples at room temperature

35 Carbon black content 1 Raw material analysis for pipe and pallet to measure the carbon black content in the resin

36 Magnifier lens 1 preliminary visual inspection tool for defects

37 Muffle Furnace 1 Ash content measurement according to ISO and ASTM standards

38 Pourability tester 1 Flowability of raw material and additives

39 Sieve shaker 1 Particle size analysis for raw material

40 Shore D 1 To measure the product hardness for pipe

41 Ball indentation 1 To measure the product hardness for film

42 Rockwell hardness 1 to measure the product hardness for pallet product

43 Microscope 1 pigment dispersion and defect analysis

44 Water Chiller 3 To maintain temperature for different equipment (Density, distillation column, etc.)

45 Blocking tester 1 To measure the addihision of the film

46 Ultrasonic Bath 1 Used to prepare solution that need temperature and sonic vibration, which is required for the permeability testers

47 Water Bath 1 Specimen conditioning tool for the density measurement

48 Heating mantle 1 Used as a complementary tool to distil solution and solvents

49 Distillation Unit 1 To distill solvents in order to purify it before using it in different equipment such as density equipment

Part B follows.

of 21



Annexure -1 Part B: Specifications

S.No Equipment Name Specification

1 Fully Automated Melt Flow Rate (MFR)

1. Must comply with ISO 1133, ASTMD1238.

2. Die 2.0950.005mm, L8.0000.025mm

3. Piston 9.4750.010mm, L6.350.10mm

4. Cylinder 9.5500.025mm, L160mm

5. Test Load from 0.325, 1.20, 2.16, 3.80, 5.00, 10.00kgf, and 21.60kgf

6. Method ISO 1133, Method A : Automatic

Method B : Automatic

7. Specimen Feeding: Automatic

8. Weight Loading: Automatic

9. Weight Change: Automatic

10. Cylinder Cleaning: Automatic

11. Die Cleaning: Automatic

12. Piston Cleaning: Automatic

13. Data Processing: Automatic

14. Software: Suitable for data analyzing and reporting.

15. Accessories Cleaning Rod (Die & Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Level, Dust Box, Gauze, Air Gun

2 Moisture analyzer

1. Complies according to ISO: 15502

2. Oven Temperature range: 50250 C 3 C

3. Heating cartridge capability integrated with the system

4. Heating rate Typically 5 to 15 C/min

5. Vessel dimensions Cooling rate Typical. 10 C/min (at 18080 C)

6. Nitrogen gas flow capability.

7. Flow range 10150 mL/min

8. Sample Bottles- 3Pks (50bottles/pk)

9. Cap with PTFE Septum: 5Pks(50bottles/pk)

10. Cap Crimper 1Number

11. Cap De crimper- 1Number

12. Molecular Sieve - 1kg

of 21



13. Karl Fisher Solvent AG Hydranal 2liters

3 Weighting Scale (2 Quantities)

1. Massing range : 0-220g

2. Readability 0.1 mg

3. Tare range: 0-220g

4. Reproducibility: 0.1 mg

5. linearity 0.3mg

6. Sensitivity stability detector

7. Calibration weight

4 Weighting Scale (2 Quantities)

1. Massing range : 0-3,000g

2. Readability 0.01 g


4. Reproducibility: 0.1 g

5. linearity 0.3g



5 Floor Weighting Scale

1. Massing range : 0-32,000g

2. Readability 0.1g


4. Reproducibility: 0.1 g

5. linearity 0.3g



6 Pellet Size Analyzer

1. Camera with 3-CCD-chip colour matrix camera.

2. Lighting with High frequency synchronized fluorescent

lamp white light spectrum;

3. Computer Industrial IntelCore 2 Duo Up-to-date technology with image processing software.

4. Physical interfaces Ethernet 10/100 M Base T, USB, RS 485,

5. RS 232, digital & analogue I/0, Fieldbus

6. Communication protocol MODBUS RTU, MODBUS TCP/IP, OPC, SQL, file transfer (customized), PROFIBUS.

7. Temperature 10 40 C

8. Instrument air: 6 bar

7 Colormeter

1. Measures yellowness / whiteness and color index of the molded or polymer pellets.

2. Wavelength Range 350nm to 1050nm

of 21



3. Light source: D65/10

4. Automated UV calibration and calibration material for the sensors.

5. Must comply standard ASTM E313

8 Density Buoyancy method

1. Comply with ISO 1183-1

2. Balance with automatic Density measurement.

3. Chiller

4. Conditioning the specimens Chamber to maintain at 23C

5. Balance readable: 220gm.

6. Reading: 0.0001gm.

7. Jacketed Beaker for maintaining the Temp at 23C.

9 Density Gradient Column

1. Comply with ISO 1183-2

2. Gradient Column: Jacketed Bath should be big enough to accommodate two columns (To maintain temp at 23C).

3. Chiller to maintain the bath at 23C.

4. Density Floats: (Range 0.8000- 1.500) should be in the interval of 0.01 units (0.8- 1.5)

5. Microprocessor based Automatic solution filling system.

6. Column sweeping basket- motorized

7. De-Algae solution.

10 Vacuum Oven

1. High-precision temperature control and turbo-drying oven.

2. It can handle heat-sensitive or oxygen-sensitive substances and materials such as additives, polymers and powders samples with unparalleled gentleness when drying.

3. It must control the temp & pressure without any leakage.

4. Temperature range up to +200 with accuracy: 0.1C

5. Vacuum range: 1 bar to 0.48 mbar

6. Control type: microprocessor PID

7. Capacity: 101l of vacuum oven

8. Anti-splinter; VDE-tested door construction for all models

11 Oven (2 Quantities)

1. Temperature range up to +300 C

2. Accuracy: 0.1C

3. Sizes 350Litre

4. Twin DISPLAY

of 21



5. Forced air circulation N/F

6. Stainless Steel Racks & Separating Plates

12 Tear Tester

1. Load range from: 200gm to 1600gm

2. Calibration weights for verify the load ranges

3. Die cutter for the preparation of standard profile (Constant radius and Trouser tear) film specimens

4. Pneumatic clamping system to prevent distortion during analysis

5. Tearing knife should be provided with the instrument.

6. Data acquisition (Force Vs. time/displacement) software to be integrated with machine.

7. Facility to store all the data in the software

13 Thickness profile Film

1. Measuring range: 0.000 - 10.000 mm, 0 - 10000 m, 0.00 - 394.00 mil

2. Measuring units: m, mm and mil

3. Accuracy: 1 m or 0,1% of the reading, whichever is greater.

4. Opening Gap: Adjustable 1.0 11.0 mm

5. Delay time: Adjustable 0 30 seconds

6. Test mode: Electrically driven motor with

of 21



6. Resolution: 0.005cc/m2-day

7. Repeatability: 0.01 cc/m2-day

8. Facility to run two specimens simultaneously.

9. Sensors suitable for humidity measurements

10. Coulometric Sensors

11. Calibration films

12. Metallized masking stickers required to conduct permeability on small specimen size.

16 Water vapor permeability

1. Conforming to ASTM F1249

2. Water vapour transmission range: 0.005 to 100g/m2-day.

3. Controlled RH testing: 5 to 100%RH 3RH.

4. Time to reach Humidity setting: < 8hrs to reach 100 %RH

5. Temp. Range: Ambient to 50C 0.2C temp. Accuracy..

6. Test area: 10-50 cm 2

7. Calibrated film samples to be provided.



10. 0.2C temp. Accuracy.


17 Carbon dioxide permeability

1. Conforming to ASTM F2476

2. Carbon Dioxide transmission range: 1 to 8000 cc/m2-day with repeatability of 0.2%

3. Controlled RH testing: 35 to 100%.

4. Temp. Range: ambient to 50C 0.5C.

5. Test area: 10-50 cm 2.



8. Coulometric Sensors.

9. Calibration films.


18 Friction tester

1. Force capacity: 500gm/200gm

2. Crosshead speed range: 0.05 to 500 mm/min

3. Operating Temperature 5 to 35C (41 to 95F)

4. Maximum Crosshead Travel: 500 mm (19.7 in)

5. Capable of measurement of both Static & Dynamic friction coefficient.

of 21



6. Must comply with ASTM D 1894

7. Calibration weights to calibrate the load cell

8. Cutting template for the preparation of film specimen.

9. Data acquisition (Force Vs. time/displacement) software to be integrated with machine.

10. Capability to store all the data in the software.

19 Dart drop

1. Drop Height must be more than 1530mm to cover method A & B of ASTM D1709

2. Stainless steel dart dia. 38.1mm 0.13mm and mass 32 2g (Method- A)

3. SS Stainless steel dart dia. 50.8mm0.13mm, and mass 320 10g (Method B)

4. Specimen Clamp inside dia 125 2mm

5. Dual Height Option

6. Floor Mounted

7. Pneumatic Clamping

8. Digital showing of velocity of falling of dart/ Weight measurements.

9. Additional weights to conduct all incremental weights as per the standards.

10. Calibration device the check center of impact dart alignment.

20 Gel Counter

1. Camera with built in reflection and back light for transparent & opaque samples.

2. Principle CCD Line Sensor.

3. Pixel size: 10 x 10m2 ; Resolution: 50m

4. Illumination: HF recycled, High performance fluorescence.

5. Inspection area: 200 x 500mm.

6. Aspect ratio / Dynamic range: 1000:1.

7. Ethernet communication to transfer the picture to analyze the size distribution.

8. PC with in-built software to produce the particle distribution chart for each analysis.

9. Image procession software and system configuration.

10. Calibration sample to calibrate the size specification (0.5micron to 5mm).

21 Fully automated Impact tester Base Unit

of 21



1. Pendulum-type machine for impact tests, electronically controlled, built according to ISO / ASTM Charpy, IZOD and tensile impact methods.

2. Monolithic single column structure made of cast iron for maximum rigidity and accuracy.

3. Energy range from 0.5 to 25 Joules with optional integration to upgrade into higher energy.

4. Automatic control for stopping the hammer swing.

5. Contact-less, friction-free encoder, for accurate measurement of the hammer angular position.

6. Integrated drawer to collect broken specimens.

7. Quick change of pendulum hammers and hammer identification integrated with the system.

8. Automatic detection and check of lost hammer energy

Control & Software Characteristics

9. Control with embedded-PC, Windows-CE based.

10. Display of real time results during test execution.

11. Possibility to input and store the type of break

12. Management of specimen lots and statistical calculations.

13. Capability to store more than 100 test parameters and test results.

14. Possibility to export stored data.

15. Ethernet port for local area network connection for data export

16. USB port for external flash memory connection and printer

Izod Accessories: (ISO 180, ASTM D256)

17. Pneumatically controlled specimen clamping with manually adjustable force from 50 to 150N.

18. Adaptor for ISO 180(80 * 10* 4 mm).

19. Jig for aligning notched and unnotched standard specimen.

20. 0.5 to 5.5 J - Izod hammer for ISO 180 & ASTM D 256.

Charpy support (ISO 179, ASTM D6110)

21. Notch alignment device for standard specimens.

of 21



22. Shoulders or support base for specimen: 80 * 10 * 4mm, Impact direction: Flatwise.

23. Shoulders or support base for specimen: 80 * 10 * 4mm, Impact direction: Edgewise.

24. 0.5 to 5 J - Instrumented Charpy hammer.

Tensile Impact accessories (ISO8256)

25. Tensile impact vice with piezoelectric sensor, 2.2kN for tensile impact vice.

26. Clamps for specimen type - 1; Specimen thickness from 0.5 to 5 mm.

27. Base for Tensile Impact Vice, nominal speed 2.9m/s and hammer capacity up to 5 Joules.

28. Tensile impact vice; 4Joule Tensile impact hammer for ISO 8256-Method A;

29. Data acquisition channel to be integrated with machine.

30. Crosshead clamping jig with 15g & 30g crosshead for specimen type-1 to 4 to achieve hammer energy from 0.5 to 15J.

Cryobox

31. Environmental test chamber assembled on the pendulum, to cool specimen and vice suitable for IZOD, Charpy and tensile impact tests according to ISO, ASTM and equivalent standards.

32. Temperature: Ambient to -60C from the room temperature.

33. Suitable to cool the specimen size for ISO179, 180 and ASTM D6110 & D256.

34. Max. 20 specimens to be conditioned.

35. Temperature controller with digital display.

36. Cooling by liquid nitrogen.

37. Removable cryobox cover to allow easy access at room.

22 UTM Tester

Base Unit

1. Dual Column Floor model

2. Testing type: Tension & Flexural.

3. Capability of load cells from 1kN to 100kN

4. The structure should be rigid closed frame with high stiffness to reduce the deflection of frame under load.

5. Electric motor to drive the crosshead with control speed.

of 21



6. Equipment connected with communication software to control by software and live recording.

7. Compatible with operating temperature of 20 to 30C and humidity of 10 to 90%RH.

8. It should be noise free during the experiment condition.

9. Interchangeable load cell to fix for different sample loading.

10. Maximum speed: 1000 mm/min. & minimum speed: 0.01mm/min.

11. Crosshead speed accuracy: 0.2% and position accuracy: 0.001mm.

12. Load cell accuracy: 0.01% of load cell accuracy.

13. Maximum crosshead height: 2000m from the lower grip.

Tensile & Flexural

14. For plastic films, Pneumatic action with 50 wide x 50 mm thick flat faces.

15. For rigid plastics, wedge action with 50 wide x 30 mm thick serrated faces.

16. For fabrics, Pneumatic action with min. 25 to 100 mm wide strip flat faces.

17. Proper gripping and guidance bar required to clamp the specimen in same location all the times.

18. Software facility to control the analysis and the manipulation of all tensile calculation. In built calculation for all the tensile measurement.

19. For flexural, three point bending support fixture to be supplied.

20. Adjustable supporting nose to vary the span length.

21. Environment chamber facility in the range of -70 to 200C is required to conduct the different temperature experiment.

22. Extension bar required to accommodate the grip inside the environmental chamber.

Extensometer

23. High resolution digital camera (resolution: 501 m)

and advance real-time measurement to make precise axial strain measurement on material test specimen.

24. No contact on test specimen during the experiment.

of 21



25. Field of view: max.500mm.

26. Minimum axial gauge length: 10mm

27. Maximum following speed: 1000 mm/min.

28. Point marking system by maker pen.

23 Band saw

1. Must be capable of cutting the pipes and thick sheets.

2. Speed adjustable capability

3. Guidance for the length dimension at the cutting base

4. Cutting base platform with 750mm * 750mm dimension for support for the samples.

5. Blade Dimension: 2250x 16 x 0.6 mm (LxWxT)

6. Guidance plate for cutting at different angle of sample.

24 Notching device

1. Conforming to the requirements of ISO 179, ISO 180 / ASTM D 256, ASTM D6110 & ISO 8256 standards

2. Cutting profile should be single plane without any distortion during notching

3. Adjustable Cutter speed from 1mm/min to 3000mm/min with capability of cutter torque

4. Clamping capacity to accommodate the specimen size from 4mm to 10mm thick specimen.

5. Facility of measuring notching depth

6. Calibration device for notch depth measurement.

25 Die Puncher

1. Max. Punching Force: 32 kN

2. Max. Punching Stroke: 40 mm

3. Table Size: 250 x 200 mm

4. Compressed Air: 6 bar (max.)

5. Clearance height:130mm

6. Removable die cutter: ISO527, ISO 178, ASTM 695, ASTM D790

26 CNC milling machine

1. Motor speed 27,000 rpm

2. Cutting area must be minimum of 350 x 350mm

3. Air supply to flush the debris of material from the cutting area.

4. max routing height 100mm

5. Cutter with 1 mm to 5mm diameter sizes for milling the plastic sheet.

6. Clamping tool to accommodate the pipe sample from diameter 15mm to 60mm sizes.

27 Compression press 1. Platen dimension: 400 x 400 mm

2. Opening of press: 100mm

of 21



3. Max. Pressure capacity: 600 kN

4. Max. Working temperature: 300deg C

5. Platen cooling with direct water cooling for symmetrical and high speed cooling for whole platens area.

6. Cassette cooling system is required to achieve rapid cooling rate of 60C/min.

7. Platens should be hardened with copper cover platens.

8. Water cooling unit is required for platen press. Chiller should able to cool the press up to 15 deg C.

28 Precision specimen cutter

1. Cutting Path variable step down capability

2. Aluminium Sliding Table top (150 mm)

3. Digital Parallel stop for the table top

4. Micro spraying capability

5. Clamping device for parallel stop

6. Feeding device 90 degree stop

7. Saw blade (HSS) - min 4 nos 100mm x 1.5 mm

8. Suction system with brush head and extraction unit

9. Pedal Switch with safety guard

10. Template holder

11. Template with clamping strip with test bar in 3 to 10 mm

29 Strip cutter

1. Specimen preparation from films, thickness from 20m up to 100 m)

2. Working dimension: 500 x 500mm

3. Strip width: 15mm width

4. Cutting length: 230mm

30 Water purification system

1. To produce ultrapure water.

2. Resistivity : 18.2MWcm at 25C

3. Water Treatment System with flow rate of 1l/min.

4. TOC of

of 21



5. Support for stirring hotplate and temp probe

6. Temperature controller with stainless steel probe.

32 Chambers for Cooling samples

1. Temperature range: -70C to 180C.

2. Temperature fluctuation: 1C

3. Heating up time: -70C to +180C by 55min.

4. Inside volume: 115L / 4.1 cu ft.

5. Inside dimension: 600 x 480 x 400 (WxHxD)

6. Window facility is required to view inside the chamber & Lockable door.

7. Window size: 288 x 222 mm

8. Load per shelf: 30kg

9. Capability to store min.25 programs.

10. Graphical presentation of programming process.

11. Monitoring the temperature (Min. and Max).

12. Ethernet communication interface facility.

13. Condensation protection for test objects.

14. Adjustable temperature safety limits.

15. Compressor cooling system should be uses environmental friendly refrigerant (R404a & R23).

16. Inner chamber should be high quality stainless steel.

17. Caster wheel for easily movement.

18. LED lightening in the inner chamber.

19. 2 stainless steel shelf is required.

20. Communication software to monitor the temperature profile during the operational time.

21. Acoustic noise should be minimal (less than 64 dB(A))

22. Calibration certificate for temperature.

33 Microtome

1. Fully motorized rotary microtome with handwheel, separate control panel and section waste tray and etc.

2. Knife holder base, Knife holder NZ, and reusable.

3. 3 set of TC profile -d, reusable.

4. Fixture for specimen clamp and orientating.

5. Quick clamping system.

6. Standard specimen clamp 50x55 mm.

7. 1 nos. of V inserts.

8. 1 nos. of foil clamp type II.

9. 1 no. of Rd. spherical holder.

10. Holder for round specimens, silver-colored, with adapter, with inserts (6, 15, 25 mm).

of 21



11. 1 nos of section waste tray large.

12. 1 nos. of foot switch.

34 Desiccator

1. Durable and efficient design desiccator.

2. Material: Pyrex

3. Type: Vacuum desiccator

4. Plate diameter: 230mm

5. Maximum vacuum of 29.9 Hg.

35 Carbon black content

1. Temperature range oven: 0 - 1,100 C.

2. Temperature resolution oven: Up to 200 C: 0,1 K; Over 200 C: 1 K.

3. Carbon black tester accuracy: Up to 100 C: 0,1 %; Over 100 C: 0,5 %.

4. Flow measuring device 5-95 NL/h or 1-13 NL/h

5. Supplies with consumables (Silica glass tube and other accessories) items required for one year

6. All type of tubing from pressure reducing valve to tester.

7. For operation, Pyrogallol solution for purification of the oxygen, consisting of:

8. Silica gel granulate for drying of oxygen and assay in the desiccator.

9. Trichlorethylene for purification of the exhaust fumes.

10. Ice for cooling of the hot fumes, to avoid overheating and quick volatilization of the trichloroethylene.

11. Complies with ISO 6964, ASTM D1603

36 Magnifier lens

1. Magnifier les with LED bulbs to provide high quality illumination and long life.

2. Dimming control.

3. Precision light intensity adjustment.

4. Magnification of 2x.

5. Viewing area: 30 cm.

6. Table clamp mounted.

7. Six preprogrammed directional light adjustment.

8. 180 directional rotation.

37 Muffle Furnace

1. Operation Temp up to 11000C, Temp Accuracy:50C,

2. Temp uniformity :50C

3. Capacity: 7 liters

4. Max. continues operating temperature (C): 1000

5. Rise in temp to Max temperature at 100 minutes.

of 21



38 Pourability tester

1. Unit must comply with ISO 6186.

2. Filling funnel and 3 different nozzles (10, 15 and 25 mm) to be supplied.

3. Stand mounted on a rigid base plate with adjustable feet.

4. 100ml cylinder for measuring bulk density.

39 Sieve shaker

1. Electro-magnetic vibration action.

2. Sieve size: 20cm

3. Ideal for small samples of chemicals, pellets and minerals

4. Vibration frequency: 3600 vpm

5. Frequency: 60taps/min

6. Timer range: 1 to 100 minutes.

7. Size mesh range: 30m to 4mm.

8. 6 feet height to clamp the different types of sieve meshes.

9. 0 to 100% amplitude control for fine particle separation.

10. 6-ft power cord to clamp all the sieves.

40 Shore D

1. Digital readout.

2. Range: 20 to 90 hardness

3. Graduation: 0.5

4. Indenter: Sharp

5. Tip Angle: 30 1

6. Holding bar and Durometer stand

7. Must Conform to ISO 868, ASTM D 2240

41 Ball indentation

1. Comply with ASTM D785 and ISO 2039-1.

2. Digital dial display.

3. 4mm height indicator.

4. Loading weight for test loads: 49N, 132N, 358N, 961N

5. Support table diameter of 200mm

6. Calibration set.

42 Rockwell hardness

1. Different loads: 60, 100 and 150 kgf.alibration set. ts for different scales

1. d applicattion.pplied.

2. Comply with ASTM D785 and ISO 2039-2.

3. Automatic operation of minor and major load during operation.

4. Rockwell scale : R, L, M, E, K.

of 21



5. Indenter diameters as per different scales.

6. Calibration set.

43 Microscope

1. Integrated 12V DC 100W power unit 240V, AC/50Hz/168VA

2. Stand- information display (3.7 x 7.7 cm)

3. Mechanical stage 8 x 4.

4. 6x objective turret with M32 thread

5. Koehler illumination of 1.25x to 100x

6. Mot. Condenser top.

7. Incident Lighting: 12 V 100W Hg lamp/ 50W Hg Lamp/100W halogen Lamp.

8. PC with in-built software. (with 160GBHd, 3GB RAM, Core2duo Processor).

9. Multi stage position adjuster.

10. Automatic Illumination Manager.

11. Operation must be motorized.

12. Magnification must be > 150x.

13. Image analysis software to analyze the carbon black dispersion.

14. Standard working procedure to produce report on dispersion, as per ISO 18553.

15. Fully automatic and semi-automatic inspection of pigment or additives dispersion.

16. Digital control of all components

17. User friendly, powerful and highly adaptive software.

18. Windows based operating system.

44 Water Chiller (3 Quantities)

1. Working temperature range: -20 to 150C

2. Temperature stability: 0.03C

3. Temperature selection/indication: Digital/LED

4. Resolution: 0.1C

5. Temperature control: PID

6. Refrigerant: R134a

7. Circulation pump: 15l/min

8. Heater wattage: 2kW

45 Blocking tester

1. Two platens for blocking

2. Electronically rate of loading timed at 90gm/min. and maximum of 210gm/min.

3. Parallel plates dimension: 100cm2

4. Complies with standard method of ASTM D3354.

of 21



5. DC stepping motor system with Solid state Logic chips

6. Digital solid state display reads out up to 0.01g

7. LED sensing system to sense separation of Platen.

46 Ultrasonic Bath

1. Digital readout of temperature, ultrasonic power and cleaning time.

2. Degas position for degassing.

3. Cleaning time adjustable from 1-99 minutes or continuously.

4. Bath temperature adjustable/ readable till 80C, resolution one Degrees C.

5. Temperature accuracy approx. 2C.

6. Ultrasonic power adjustable 40% -100%.

7. Constant ultrasonic intensity which is independent from the liquid level, temperature and loading. This feature guarantees constant and reproducible results.

8. By the Frequency Sweep a frequency modulation function, standing waves will be avoided and a homogeneous ultrasonic field created.

47 Water Bath

1. Temperature Range: Ambient +5 to 100C

2. Temperature Uniformity: 0.2C

3. Temperature Stability: 0.25C

4. Hinged gable cover

5. Digital Temperature Controller with 3 pre-sets for frequently used temperatures

6. Calibration capability

7. Local lockout helps prevent unauthorized set-point changes

8. Reservoir sizes from 10litres

9. Primary and automatic safety thermostats.

48 Heating mantle

1. Modular heating mantle with base and controller

2. Flask capacity: up to 1000mL

3. Plug in heating elements

4. Replaceable heating elements cartridges

5. Indicators for power on and heater on

6. Spark free preferred solid state controller

7. Temperature controller with Stainless steel (Thermocouple) probe, Support for the probe

8. Support rod with clamp for flask holding

49 Distillation Unit 1. Batch production of high purity distilled water

of 21



2. Condenser tabulations: 10mm OD

3. Condenser jacket: 200mm

4. Flat bottom flask:1000mL

5. Timble

=========================

scope of supply - lab equipments

Documents

raw material analysis

raw material pellets

extruded material

film strength analysis

film products

various analysis

optical analysis

thickness profile film