scm solutions
DESCRIPTION
An industrial group which is leader in the creation, production and distribution of technologically advanced solutions to process a vast range of materials (wood, glass, stone, plastic, metals and composite materials), with specialist brands for specifi c technologies and centres of excellence expert in industrial components, present on all 5 continents for more than 50 years.TRANSCRIPT
scmsolutions
scm_solution_cat.generale.indd 1 04/07/12 16.16
The best global partner that is very close to woodworking companies.
scm_solution_cat.generale.indd 2 04/07/12 16.16
scm_solution_cat.generale.indd 3 04/07/12 16.16
An industrial group which is leader in the creation, production and distribution of technologically advanced solutions to process a vast range of materials (wood, glass, stone, plastic, metals and composite materials), with specialist brands for specifi c technologies and centres of excellence expert in industrial components, present on all 5 continents for more than 50 years.
PASSION
it’s the passion for our work,it’s the central role of man, his creative genius, the spirit of initiative and the ability to work within a team.
if you want to build a ship,don’t drum up people to collect wood and don’t assign them tasks and work, but rather teach them to yearn for the endless immensity of the sea.Antoine de Saint-Exupéry
TECHNOLOGY
it is the scientific rigourthat transforms creativity in highly technological solutions, which are accessible and are ableto provide competitive advantages.
every difficulty is overcome by our determination.Leonardo da Vinci
PERFORMANCE
It is the commitment that is transformedin results and the success of our partnersthat rely on the Scm Group solutions.It’s being recognised as suppliers of “competitive advantages that last over time”.
an organisation’s ability to learn,and translate that learninginto action and results rapidly,is the ultimate competitive advantage.Jack Welch
scmgroup
scm_solution_cat.generale.indd 4 04/07/12 16.16
5
“Scm is part of the Premium Division of Scm Group and has been created to offer confi gured products and services dedicated to the trade”. Scm distributes classic and automatic machines through a partnership with the best dealers in the world, built on business training, technical assistance training, innovative tools for continuous updating.These exclusive tools combined with knowledge of the market allow the dealer to successfully meet customer requirements.The distribution network has 21 branches and more than 350 select dealers.
the best global partner that is very close to woodworking companies.From L’invincibile onwards, Scm has offered the widest range of machines for machining panels and solid wood.Scm’s objective is to guarantee customers high quality technologies which meet their requirements in such a way as to make Scm Group the partner to go to for any future needs.
scm
scm_solution_cat.generale.indd 5 04/07/12 16.16
scmstrengthpoints
EXPERIENCE
60 years experience producing and distributing “state-of-the-art”woodworking machines.
THE BESTDISTRIBUTION NETWORK
15 subsidiaries and 350 distributorsworldwide, to always be constantly close to all our customers.
THE RANGE
From L’invincibile onwards,the widest range of machines to process panels and solid wood.
CONSTANT TRAINING
1,200 hours training per year and effective updating tools for continuous and accurate training of our sales network.
QUALITY
A wide range which guarantees customer loyalty with Scm who are committed to each sale for their satisfi ed customers, to ensure they continue to choose Scm for all theirfuture machinery requirements.
INTEGRATION
The Partners portal provides maximum integration between the customer, distributor and manufacturer.
scm_solution_cat.generale.indd 6 04/07/12 16.16
7
scm_solution_cat.generale.indd 7 04/07/12 16.16
index classical machines
PROGRAMMEDCIRCULAR SAWSpage 16
MANUALCIRCULAR SAWSpage 23
SPINDLE MOULDERSWITH FIXED AND TILTABLE SPINDLEpage 32
SURFACE PLANERSpage 48
SI 4OO NOVApage 29
SI 4OO NOVApage 26
TI 12O CLASSpage 39
SI 3OO S NOVApage 29
SI 3OO NOVApage 29
SI 35O CLASSpage 23
TI 1O5 NOVApage 42
TF 11O NOVA page 45
TF 1OO NOVA page 45
F 52OO L’INVINCIBILEpage 48
F 52O CLASSpage 54
F 52O NOVApage 62
F 41O CLASSpage 55
F 41O NOVApage 63
SI 75OO L’INVINCIBILEpage 16
SI 55O CLASSpage 20
SI 4OO CLASSpage 23
SI 3OO CLASSpage 23
TI 26OO L’INVINCIBILEpage 32
TF 24OO L’INVINCIBILEpage 33
TI 155 CLASSpage 36
TF 135 CLASSpage 39
TF 13O CLASSpage 39
scm_solution_cat.generale.indd 8 04/07/12 16.16
9
COMBINED SURFACE/THICKNESSING PLANERSpage 58
COMBINEDSAW/SPINDLE MOULDERSpage 70
AUTOMATIC PLANERS ANDTHROUGHFEED MOULDERSpage 78
SEMI-AUTOMATICBORINGMACHINESpage 86
SEMI-AUTOMATICEDGE BANDERS AND TRIMMING MACHINESpage 82
THICKNESSING PLANERSpage 50
TENONING MACHINESpage 74
MULTIBLADERIP SAWSpage 76
S 63O CLASSpage 57
S 63O NOVApage 64
S 52O CLASSpage 56
S 52O NOVApag 65
S 63OO L’INVINCIBILE page 50
S 52OO L’INVINCIBILEpage 51
FS 41O NOVApage 66
FS 52O CLASS page 58
ST 35O CLASSpage 70
PROFISET 4O page 78
TOP 35 E PLUSpage 89
OLIMPIC M 8Opage 82
OLIMPIC M 8O Tpage 83
TEN 22O CLASSpage 74
M 3page 76
STARTECH page 86
MULTITECH PLUS page 89
PROFISET 6O page 81
scm_solution_cat.generale.indd 9 04/07/12 16.16
index advanced machinery
SIGMA P
AUTOMATIC BEAM SAWSWITH PLATFORMpage 96
SIGMA
AUTOMATIC BEAM SAWSpage 102
TECH
CNC MACHINING CENTRESWITH BAR WORKTABLEpage 124
OLIMPIC S
AUTOMATIC EDGE BANDERSpage 110
VERTICUT
VERTICAL BEAW SAWSpage 108
OLIMPIC K
AUTOMATIC EDGE BANDERSpage 116
SIGMA IMPACT page 102
TECH Z 1page 127
OLIMPIC S 2OOOpage 113
OLIMPIC S 3 OOOpage 113
OLIMPIC K 8OOpage 116
OLIMPIC K 6OOpage 119
OLIMPIC K 4OOpage 119
TECH Z 2 page 127
OLIMPIC S 1OOOpage 110
VERTICUT 6Opage 108
OLIMPIC K 26O EVO page 121
TECH Z 5page 124
SIGMA IMPACT Ppage 96
SIGMA PRIMA P page 99
OLIMPIC K 13Opage 121
SIGMA PRIMApage 105
scm_solution_cat.generale.indd 10 04/07/12 16.17
11
CYFLEX
CNC BORINGCENTRESpage 138
GS
PRESSESpage 144
SANDYA
WIDE BELTSANDERSWITH 2 OR 3 OPERATINGGROUPSpage 150
SANDYA
WIDE BELT SANDERSWITH 1 OR 2 OPERATINGGROUPSpage 156
PRATIX
CNC MACHINING CENTRES WITH MULTIFUNCTION WORKTABLEpage 130
CABINET ASSEMBLY CLAMPSpage 146
PRATIX Npage 135
PRATIX Z 5page 130
PRATIX Spage 135
PRATIX Z 2page 132
SMpage 146
SM-Kpage 147
ASSEMBLA Ppage 148
ASSEMBLA E page 149
SANDYA 3OOpage 156
CYFLEX H 8OOpage 140
CYFLEX F 9OOpage 138
GSpage 144
SANDYA 9Spage 151
SANDYA 6OOpage 153
SANDYA SYSTEM FIVEpage 157
SANDYA 1S page 159
SANDYA 16S page 150
scm_solution_cat.generale.indd 11 04/07/12 16.17
scmclassicalmachines Design, cutting, thicknessing and finishing, routing, sanding, assembly.
scm_solution_cat.generale.indd 12 04/07/12 16.17
13
scm_solution_cat.generale.indd 13 04/07/12 16.17
scmtoptechclassical machinesMain toptech
circular sawsSLIDING CARRIAGE: HIGHEST QUALITY OF CUT GUARANTEED FOR A LONG TIME. The carriage will never require adjustment due to to its structure with arch-ground steel slide ways (Scm exclusive and patented solution) and it can accept loads four times higher.
spindle moulders TOOL DETECTION SYSTEM: SETTING UP SPEEDILY AND SAFELY.This system eliminates any manual operation for setting up the required work allowing the operator to automatically input all the work data and selecting only the programs associated with the tool installed. Less input data , fewer errors, immediately ready to work.
spindle moulders ELECTROSPINDLE: MACHINING CENTRE TECHNOLOGY SERVICE FOR THE WOODWORKER.Absolute machining precision and absence of vibration due to the perfectly balanced structure of the electrospindle. Top performance and finishing quality due to the electronic speed control from 900 to 12.000 rpm. The electrospindle’s direct drive eliminates maintenance procedures common with conventional belt driven systems.
circular saws “FULL SUPPORT” FRAME WITH “WIRELESS” FUNCTION: WHEN TECHNOLOGY REALLY HELPS.It provides maximum support for the panel for both angled and tilted cuts. It consists of a single centre of rotation for maximum reliability over time and a robust design to support all angles even with large, heavy panels. The electronic control with the integrated “wireless” system updates in real-time the data for the positions of the stops, always showing the actual size of the required work piece.
scm_solution_cat.generale.indd 14 04/07/12 16.17
15
planersINTERCHANGEABLE ROLLERS:
ONE MACHINE FOR EVERY REQUIREMENT.Perfect finish obtained by quick and easy changeover of the rollers that allows the operator to configure the machine drive function in case of special requirements such as a minimum removal of fine wood and / or batches where multiple pieces of different thicknesses are processed. The operator does this by simply replacing the first toothed steel roller with a rubber roller.
planers PNEUMATIC ADJUSTMENT:
THE PERFECT FEED IN ANY WORKING CONDITION.The pressure exerted on the work piece can be changed at any time by adjusting the pneumatic load on the rollers for the best finish and effectiveness of the feeding of any material and in any working condition.The unique ability to differentially set the pressure on the infeed and outfeed rollers allows the operator to combine maximum efficiency of the feed with the need for limited material removal.
semi-automatic boring machine THE ONLY BORER THAT DRILLS FROM THE TOP.The system of boring from the top uses the outside of the panel as a reference concealing any defects; the result is to always move any difference in panel thickness to the inside of the cabinet.
multiblades rip sawANTI-KICKBACK FINGER BARRIERS: GUARANTEES OPERATOR SAFETY.Maximum degree of safety that is available on the market due to the exclusive Scm system using finger barriers that ensure the anti-kickback of the work piece and protection against the splinters produced during machining
scm_solution_cat.generale.indd 15 04/07/12 16.17
SI 75OO L’INVINCIBILE
Machine type electronic programmed
Squaring capacity with carriage and extended stop mm 3200x3200
Blade tilting 90°/46°
Main blade rotating speed rpm 2500 - 3500 - 5000
Scoring blade rotating speed rpm 8500
Cutting height at 90°/45° with 450 mm scoring blade mm 149 / 94
Cutting height at 90°/45° without 550 mm scoring blade mm 200/130
Main blade motor power Hz 50 kW (HP) 9 (12)
Scoring blade motor power Hz 50 kW (HP) 0,9 (1,2)
l’invincibile circular sawsThe exclusive choice for your success.
Circular saw
scm_solution_cat.generale.indd 16 04/07/12 16.17
17
Experience, technical research, Italian creativity:buying a “L’invincibile” machine means you get anexclusive, customised solution.
scm_solution_cat.generale.indd 17 04/07/12 16.17
SAW UNIT:A PERFECT CUT.Maximum torsional rigidity and the total absence of vibration through the closed loop structure of the saw unit which ensures perfect alignment of the blades during tilted and troublesome cuts.
toptech SLIDING CARRIAGE: MAXIMUM CUT QUALITY GUARANTEED OVER TIME.The carriage will never require adjustment and thanks to its structure with arch-ground steel slideways (Scm exclusive and patented solution) it can bear loads four times higher.
l’invincibile circular sawsadvantages
“ARC” PROFILE: FOR EXCELLENCE IN MACHINING.• no play and no need for adjustments over time• higher loading capacity• ± 0,05 mm tolerance on the entire carriage length for straight and high quality cutting. The horizontal positioning of the guides ensures protection from dust therefore improving the sliding of the carriage.
scm_solution_cat.generale.indd 18 04/07/12 16.17
19
toptech “FULL SUPPORT” FRAME WITH “WIRELESS” FUNCTION: WHEN TECHNOLOGY REALLY HELPS.It provides maximum support for the panel for both angled and tilted cuts. It consists of a single centre of rotation for maximum reliability over time and a robust design to support all angles even with large, heavy panels. The electronic control with the integrated “wireless” system updates in real-time the data for the positions of the stops, always showing the actual size of the required work piece.
TELESCOPIC SWINGING ARM: “INVINCIBILE” FLUIDITY OF MOVEMENT”.The work piece support frame is the only one to be made of a large dimensioned extrusion and linear guide on recirculating ball bearings. It ensures:• maximum work piece with fluid movement • no play and no noise• dust protection• no need for maintenance
toptech
scm_solution_cat.generale.indd 19 04/07/12 16.17
SI 55O CLASS
Machine type electronic programmed
Squaring capacity with carriage and extended stop mm 3200x3200
Blade tilting 90°/46°
Main blade rotating speed rpm 2500 - 3500 - 5000
Scoring blade rotating speed rpm 8500
Cutting height at 90°/45° with 450 mm scoring blade mm 149/94
Cutting height at 90°/45° without 550 mm scoring blade mm 200/130
Main blade motor power Hz 50 kW (HP) 7 (9,5)
Scoring blade motor power Hz 50 kW (HP) 0,9 (1,2)
class circular sawsThe best solution for every application.
Circular saw
scm_solution_cat.generale.indd 20 04/07/12 16.17
21
scm_solution_cat.generale.indd 21 04/07/12 16.17
CLASS SI 3OO SI 35O SI 4OO SI 55O
Machine type M* M or P* M or P* P*Squaring capacity with carriage and extended stop mm 3200x3200 3200x3200 3200x3200 3200x3200
Main blade rotating speed mm 315 350 400 550
Cutting height at 90°/45° mm 100/70 118/81 140/97 200/130
Main blade motor power Hz 50 kW (HP) 5 (7) 7 (9,5) 7 (9,5) 7 (9,5)
Scoring blade motor power Hz 50 kW (HP) 0,9 (1,2) 0,9 (1,2) 0,9 (1,2) 0,9 (1,2)
* = M manual / P programmed
class circular sawsrange
scm_solution_cat.generale.indd 22 04/07/12 16.17
23
3
4
2 SI 3OO CLASS
SI 35O CLASS
SI 4OO CLASS
Circular saw
Circular saw
Circular saw
scm_solution_cat.generale.indd 23 04/07/12 16.17
class circular sawsadvantages
OPERATOR’S SUPPORT: ONE CUT ONLY, THE CORRECT ONE.The large display suggests to the operator information for the correct use of any cutting configuration. In particular it displays in real time (Scm patent) the correct position of the stop on the basis of the known measurements of the work piece.
SAW UNIT:A PERFECT CUT.Maximum torsional rigidity and the total absence of vibration through the closed loop structure of the saw unit which ensures perfect alignment of the blades during tilted and troublesome cuts.
toptech SLIDING CARRIAGE: MAXIMUM CUT QUALITY GUARANTEED OVER TIME. The carriage will never require adjustment and thanks to its structure with arch-ground steel slideways (Scm exclusive and patented solution) it can bear loads four times higher.
scm_solution_cat.generale.indd 24 04/07/12 16.17
25
toptech “FULL SUPPORT” FRAME WITH “WIRELESS” FUNCTION: WHEN TECHNOLOGY REALLY HELPS.It provides maximum support for the panel for both angled and tilted cuts. It consists of a single centre of rotation for maximum reliability over time and a robust design to support all angles even with large, heavy panels. The electronic control with the integrated “wireless” system updates in real-time the data for the positions of the stops, always showing the actual size of the required work piece.
scm_solution_cat.generale.indd 25 04/07/12 16.17
SI 4OO NOVA
Machine type manual/programmed
Squaring capacity 3200 x 3200
Main blade diameter mm 400
90°/45° cutting height mm 140 /97
Main blade motor power Hz 50 kW(HP) 7 (9,5)
Scoring blade motor power Hz 50 kW(HP) 0,9 (1,2)
nova circular sawsGuaranteed quality at your fingertips
Circular saw
scm_solution_cat.generale.indd 26 04/07/12 16.17
27
scm_solution_cat.generale.indd 27 04/07/12 16.17
NOVA SI 3OO S SI 3OO SI 4OO
Machine type M C* M* M or P*Squaring capacity mm 1600 x 2600 3200 x 3200 3200 x 3200
Main blade diameter (opt) mm 315 (400) 315 400
90°/45° cutting height mm 100 / 70 100/ 70 140/ 97
Main blade motor power Hz 50 kW(HP) 5 (7) 5 (7) 7 (9,5)
Scoring blade motor power Hz 50 kW(HP) 0,9 (1,2) 0,9 (1,2) 0,9 (1,2)
* = M C manual compact / M manual / P programmed
nova circular sawsrange
scm_solution_cat.generale.indd 28 04/07/12 16.17
29
4
2
SI 4OO NOVA
SI 3OO S NOVA
3 SI 3OO NOVA
4 SISI 44OOOO NOVA
I 3OO S NOVA
II 33OOOOOOOO NONOVA
Manual circular saw
Compact manualcircular saw
Manual circular saw
scm_solution_cat.generale.indd 29 04/07/12 16.18
nova circular sawsadvantages
“READY” CONTROL SYSTEM: WORK PROGRAMMING BECOMES SIMPLE AND EFFECTIVE.Easy to use due to the “Ready” last generation electronic control for managing:• blade lifting and tilting• programmable parallel fence• display of blade rotation speed• counting and calculator
SLIDING CARRIAGE:SMOOTH OPERATION MOTION GUARANTEED OVERTIME.By the system of sliding bearings running on hardened steel guides using an exclusive method of mechanical fixing.
SAW UNIT:A PERFECT CUT.Maximum torsional rigidity and the total absence of vibration through the closed loop structure of the saw unit which ensures perfect alignment of the blades during tilted and troublesome cuts.
scm_solution_cat.generale.indd 30 04/07/12 16.18
31
scm_solution_cat.generale.indd 31 04/07/12 16.18
TI 26OO - TF 24OO L’INVINCIBILE
l’invincibile spindle moulder An immediately recognisable style.
Spindle moulder
TI 26OO TF 24OO
Worktable dimensions mm 2500x750 2500x730
Spindle tilting ±45,50° -
Working length of spindle mm 140 140
Rapid tool change HSK B 63 HSK B 63
Max. tool diameter retractable under table mm 300x75 300x75
“Flex” spindle moulder stroke (positioning with respect to the spindle axis) mm 250 (da -125 a +125) 230 (da -125 a +125)
scm_solution_cat.generale.indd 32 04/07/12 16.18
33
No limit to the creativityand customisation of manufactured products.
scm_solution_cat.generale.indd 33 04/07/12 16.18
toptech ELECTROSPINDLE: MACHINING CENTRE TECHNOLOGY SERVICE FOR THE WOODWORKER.Absolute machining precision and absence of vibration due to the perfectly balanced structure of the electrospindle. Top performance and finishing quality due to the electronic speed control from 900 to 12.000 rpm. The electrospindle’s direct drive eliminates maintenance procedures common with conventional belt driven systems.
l’invincibile spindle moulderadvantages
toptech “FLEX” FENCE:IMMEDIATELY IN THE CORRECT POSITION.A single simple movement to retract and re-position in an instant and accurately position the fence on the worktable with such precision that no other control is necessary (Scm patent). The exclusive stroke of 250mm on linear guides with recirculating ball-bearings ensures maximum flexibility of use for each type of application (with ±45,50° tilting and head machining)
toptech TOOL DETECTION SYSTEM: SETTING UP SPEEDILY AND SAFELY.This system eliminates any manual operation for setting up the required work allowing the operator to automatically input all the work data and selecting only the programs associated with the tool installed.Less input data , fewer errors, immediately ready to work.
scm_solution_cat.generale.indd 34 04/07/12 16.18
35
toptech LESS MOVEMENT FOR A FASTER SET-UP.
Speed of setting-up due to the unique movement mechanism of the spindle (Scm patent), which allows the operator to position independently the height of the tool with the tilted spindle and the moulder fence. All using the last technology:• tilting by screw with recirculating ball-bearings• linear guides for the vertical movement
TENONING CARRIAGE: ABOVE THE WORK SURFACE ONLY WHEN YOU NEED IT.The only quick and easy exclusion system that allows the operator to leave its base as an extension to the machine worktable to ensure out-feed continuity of support for the work piece during profiling operations. Simple and precise processing due to robust construction and movements on linear guides with recirculating ball-bearings.
“FAST” SECTIONAL WORKTABLE: THE BEST SUPPORT FOR THE WORK PIECE. Provides support for the work piece being machined as it is close to the tool, allowing the adjustment with mounted tools and the best quality finish when machining narrow pieces. The extremes in machineable material eliminate the disadvantages of a possible collision with the tool.
scm_solution_cat.generale.indd 35 04/07/12 16.18
TI 155 CLASS
Worktable dimensions mm 1200x780
Spindle tilting ±45,50°
Working length of spindle mm 140
Rapid tool change HSK B 63
Max. tool diameter retractable under table mm 300 x 80
“Flex” spindle moulder stroke (positioning with respect to the spindle axis) mm 250 (from -125 a +125)
class spindle mouldersThe best solution for every application.
More quality, more performance, more reliability combined with the technological devices of the class range of spindle moulders. This means reduced machine set up times, greater safety and ease-of-use.
Spindle moulder with tilting spindle
scm_solution_cat.generale.indd 36 04/07/12 16.18
37
scm_solution_cat.generale.indd 37 04/07/12 16.18
CLASS TF 13O TF 135 TI 12O TI 155
Machine type M or E* P* M or E* M or P*
Worktable dimensions mm 1200x730 1200x730 1200x810 1200x780
Spindle tilting - - ±45,50° ±45,50°
Working length of spindle 30-35 (40-50) diameter mm 140 (180) 140 (180) 140 (180) 140 (180)
Electrospindle - option - standard
Max. tool diameter retractable under table mm 320x85 300x85 320x60 300x 80
* = M manual / P programmed / E electric
class spindle moulderrange
scm_solution_cat.generale.indd 38 04/07/12 16.18
39
4
2
3
TI 12O CLASS
TF 135 CLASS
TF 13O CLASS
Spindle moulder with tilting spindle
Spindle moulder with fixed spindle
Spindle moulder with fixed spindle
scm_solution_cat.generale.indd 39 04/07/12 16.18
class spindle moulderadvantages
toptech ELECTROSPINDLE: MACHINING CENTRE TECHNOLOGY FOR THE WOODWORKER.Absolute machining precision and absence of vibration due to the perfectly balanced structure of the electrospindle. Top performance and finishing quality due to the electronic speed control from 900 to 12.000 rpm. The electrospindle’s direct drive eliminates maintenance procedures common with conventional belt driven systems.
toptech “FLEX” FENCE:IMMEDIATELY IN THE CORRECT POSITION.A single simple movement to retract and re-position in an instant and accurately position the fence on the worktable with such precision that no other control is necessary (Scm patent). The exclusive stroke of 250mm on linear guides with recirculating ball-bearings ensures maximum flexibility of use for each type of application (with ±45,50° tilting and head machining).
TENONING CARRIAGE: ABOVE THE WORK SURFACE ONLY WHEN YOU NEED IT.The only quick and easy exclusion system that allows the operator to leave its base as an extension to the machine worktable to ensure out-feed continuity of support for the work piece during profiling operations. Simple and precise processing due to robust construction and movements on linear guides with recirculating ball-bearings.
scm_solution_cat.generale.indd 40 04/07/12 16.18
41
“FAST” SECTIONAL WORKTABLE: THE BEST SUPPORT FOR THE WORKPIECE.Provides support for the work piece being machined also close to the tool, allowing the adjustment with mounted tools and the best quality finish in the machining of narrow pieces. The extremes in machinable material eliminate the disadvantages of a possible collision with the tool.
scm_solution_cat.generale.indd 41 04/07/12 16.18
TI 1O5 NOVATI 1O5 NOVA
Spindle moulder with tilting spindle
nova spindle moulderAn immediately recognisable style.
Worktable dimensions mm 1200x855
Spindle tilting 0° / +45°
Working length of CE spindle 30-35 (40-50) diameter mm 125 (125)
Max. tool diameter retractable under table mm 240x80
scm_solution_cat.generale.indd 42 04/07/12 16.18
43
scm_solution_cat.generale.indd 43 04/07/12 16.18
NOVA TF 1OO TF 11O TI 1O5
Worktable dimensions mm 1080x655 1200X730 1200x855
Spindle tilting - - 0° / +45°
Working length of CE spindle 30-35 (40-50) diameter mm 125 (125) 140 (180) 125 (125)
Max. tool diameter retractable under table mm 240x80 320X85 240x80
nova spindle moulderrange
scm_solution_cat.generale.indd 44 04/07/12 16.18
45
32 TF 11O NOVATF 1OO NOVA
Spindle moulder with fixed spindleSpindle moulder with fixed spindle
scm_solution_cat.generale.indd 45 04/07/12 16.19
nova spindle moulderadvantages
SET UP PRECISION AND RELIABILITY. The operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine, designed to ensure maximum accuracy and high speeds all with minimal effort.
SPINDLE MOULDER FENCE WITH MECHANICAL PROGRAMMING:MAXIMUM SET-UP SPEED AND EASE-OF-USE.No more test runs due to digital readouts that ensure accuracy to a tenth of a millimetre in positioning the two worktables.
scm_solution_cat.generale.indd 46 04/07/12 16.19
47
scm_solution_cat.generale.indd 47 04/07/12 16.19
F 52OO L’INVINCIBILE
Working width mm 520
Worktable length mm 3.008
Cutterblock diameter (no. of knives) mm 120 (4)
Cutterblock speed rpm 5000
Surface fence tilting from 90° to -45°
Main motor power kW (HP) 7 (9,5)
l’invincibile surface planerTop quality and reliability
Surface planer
scm_solution_cat.generale.indd 48 04/07/12 16.19
49
scm_solution_cat.generale.indd 49 04/07/12 16.19
S 63OO - S 52OO L’INVINCIBILE
Thicknessing planers
l’invincibile thicknessing planersPractical and safe.
S 63OO S 52OO
Worktable dimensions mm 640x1000 530x900
Working width mm 630 520
Maximum working height (minimum) mm 300 (3,5) 300 (3,5)
Maximum stock removal mm 8 8
Electronically adjustable feed speed m/min 4-20 4-20
Main motor power kW (HP) 9 (12) 7 (9,5)
scm_solution_cat.generale.indd 50 04/07/12 16.19
51
scm_solution_cat.generale.indd 51 04/07/12 16.19
E
E
l'invincibile planersadvantages
toptech CAST IRON WORK TABLES:ETERNITY IS AVAILABLE.Maximum stability and durability over time are guaranteed by the large cast iron ground worktops (3 sqm) that always allows easy and accurate machining.All this is due to the perfect flatness of the table and the smoothness of the ground surface.
CONCAVE/CONVEX FUNCTION: PERFECT JOINTS EVERY TIME.The available settings allow perfect bonding of the pieces giving excellent coupling and eliminating any joint line.Functionality particularly useful in working with long work pieces.
toptech INTERCHANGEABLE ROLLERS: ONE MACHINE FOR EVERY REQUIREMENT.Perfect finish obtained by quick and easy changeover of the rollers that allows the operator to configure the machine drive function in case of special requirements such as a minimum removal of fine wood and / or batches where multiple pieces of different thicknesses are processed. The operator does this by simply replacing the first toothed steel roller with a rubber roller.
scm_solution_cat.generale.indd 52 04/07/12 16.19
53
toptech “SMART LIFTER” INTEGRATED PROTECTION: ERGONOMICS AND SAFETY.The Scm patented protection system is perfectly integrated into the machine base for maximum protection while excluding any hindrance or obstruction in the work. The protection with automatic vertical, horizontal and tilted movements provides complete coverage of the tool before, during and after machining.
ELECTRONIC ADJUSTMENT OF THE FEED SPEED:
THE BEST FINISH AT MAXIMUM SPEED.The optimum feed speed is automatically adjusted by the Scm specific management system, which controls the power consumption of the main motor (planer group), ensuring the best possible finishing quality and avoiding the overloading of the motor.
toptech PNEUMATIC ADJUSTMENT:THE PERFECT FEED IN ANY WORKING CONDITION.The pressure exerted on the work piece can be changed at any time by adjusting the pneumatic load on the rollers for the best finish and effectiveness of the feeding of any material and in any working condition.The unique ability to differentially set the pressure on the infeed and outfeed rollers allows the operator to combine maximum efficiency of the feed with the need for limited material removal.
scm_solution_cat.generale.indd 53 04/07/12 16.19
F 52O - F 41O CLASS
class surface planersQuality oriented solutions.
F 52O F 41O
Working width mm 520 410
Total worktables length mm 2750 2610
Cutterblock diameter (no. of knives) mm 120 (4) 120 (4)
Cutterblock speed rpm 5000 5000
Surface fence tilting from 90° to -45° from 90° to -45°
Main motor power kW (HP) 5 (7) 5 (7)
Surface planers
scm_solution_cat.generale.indd 54 04/07/12 16.19
55
scm_solution_cat.generale.indd 55 04/07/12 16.19
S 63O - S 52O CLASS
class thicknessing planersEfficient, top quality finishing - guaranteed.
Thicknessing planers
S 63O S 52O
Worktable dimensions mm 640x1000 530x900
Working width mm 630 520
Maximum working height (minimum) mm 300 (3,5) 300 (3,5)
Maximum stock removal mm 8 8
Feed speed m/min 4 - 20 4 - 20
Main motor power kW (HP) 7 (9,5) 7 (9,5)
scm_solution_cat.generale.indd 56 04/07/12 16.19
57
scm_solution_cat.generale.indd 57 04/07/12 16.19
FS 52O CLASS
class combined surfacing/thicknessing planerEasy to use with rapidity combined with reliability and precision.
Combined surface/thicknessing planer
Working width mm 520
Cutterblock diameter (no. of knives) mm 120 (4)
Motor power kW(HP) 7 (9,5)
Surface planer
Total worktables length mm 2300
Surface fence dimensions mm 1200 x 190
Surface fence tilting from 90° to -45°
Thicknessing planer
Working height (min-max) mm 3/250
Feed speed m/min 5 - 8 - 12 - 18
scm_solution_cat.generale.indd 58 04/07/12 16.19
59
scm_solution_cat.generale.indd 59 04/07/12 16.19
E
E
class planersadvantages
SERVO SYSTEM FOR THE OPENING OF THE TABLES: SPEED, ERGONOMICS AND SAFETY. Changing the process from surfacing to thicknessing is now easy, safe and effortless due to the two buttons on the front of the machine that, as well as automatically raising the work tables, position the related extraction hood and the safety system.fs520 class
CONCAVE / CONVEX FUNCTION: PERFECT JOINTS EVERY TIME. The available settings allow perfect bonding of the pieces giving excellent coupling and eliminating any joint line.Functionality particularly useful in working with long work pieces.
toptech INTERCHANGEABLE ROLLERS: ONE MACHINE FOR EVERY REQUIREMENT.Perfect finish obtained by quick and easy changeover of the rollers that allows the operator to configure the machine drive function in case of special requirements such as a minimum removal of fine wood and / or batches where multiple pieces of different thicknesses are processed. The operator does this by simply replacing the first toothed steel roller with a rubber roller.
scm_solution_cat.generale.indd 60 04/07/12 16.19
61
toptech “SMART LIFTER” INTEGRATED PROTECTION: ERGONOMICS AND SAFETY.The Scm patented protection system is perfectly integrated into the machine base for maximum protection while excluding any hindrance or obstruction in the work. The protection with automatic vertical, horizontal and tilted movements provides complete coverage of the tool before, during and after machining.
toptech DUAL DENSITY ROLLER: THE OPTIMAL FEED ON WORK PIECES WITH DIFFERENT THICKNESSES.The fluid feeding also provides the best quality in the simultaneous processing of multiple boards with different thicknesses. The edges are not damaged even when the work pieces are not perfectly aligned giving great results even with minimum removal.
PNEUMATIC ADJUSTMENT:THE PERFECT FEED IN ANY WORKING CONDITION.The pressure exerted on the work piece can be changed at any time by adjusting the pneumatic load on the rollers for the best finish and effectiveness of the feeding of any material and in any working condition.
scm_solution_cat.generale.indd 61 04/07/12 16.19
F 52O - F 41O NOVA
nova surface planersGuaranteed quality at your finger tips.
F 52O F 41O
Working width mm 520 410
Total worktables length mm 2750 2610
Cutterblock diameter (no. of knives) mm 120 (4) 120 (4)
Spindle speed rpm 5000 5000
Surface fence tilting from 90° to -45° from 90° to -45°
Main motor power kW (HP) 5 (7) 5 (7)
Surface planers
scm_solution_cat.generale.indd 62 04/07/12 16.19
63
scm_solution_cat.generale.indd 63 04/07/12 16.19
S 63O - S 52O NOVA
nova thicknessing planersFlexibility and effectiveness for every working requirement.
Thicknessing planers
S 63O S 52O
Worktable dimensions mm 640x1000 530x900
Working width mm 630 520
Maximum working height (minimum) mm 300 (3,5) 300 (3,5)
Maximum stock removal mm 8 8
Feed speed m/min 5 -8- 12 - 18 5 -8- 12 - 18
Main motor power kW (HP) 7 (9,5) 7 (9,5)
scm_solution_cat.generale.indd 64 04/07/12 16.19
65
scm_solution_cat.generale.indd 65 04/07/12 16.19
FS 41O NOVA
nova combined surfacing/thicknessing planerEasy to use with rapidity combined with high productivity.
Combined surface/thicknessing planer
Working width mm 410
Cutterblock diameter (no. of knives) mm 95 (4)
Motor power kW(HP) 5 (7)
Surface planer
Total worktables length mm 2200
Surface fence dimensions mm 1200 x 160
Surface fence tilting from 90° to -45°
Thicknessing planer
Working height (min-max) mm 3,5/240
Feed speed m/min 6-12
scm_solution_cat.generale.indd 66 04/07/12 16.20
67
scm_solution_cat.generale.indd 67 04/07/12 16.20
nova planersadvantages
toptech INTERCHANGEABLE ROLLERS: ONE MACHINE FOR EVERY REQUIREMENT.Perfect finish obtained by quick and easy changeover of the rollers that allows the operator to configure the machine drive function in case of special requirements such as a minimum removal of fine wood and / or batches where multiple pieces of different thicknesses are processed. The operator does this by simply replacing the first toothed steel roller with a rubber roller.
scm_solution_cat.generale.indd 68 04/07/12 16.20
69
FEEDING ROLLERS ON CONNECTING ROADS: PERFECT FINISH.The stopping of the work piece and the presence of notches on its surface are eliminated due to the roller support system that allows their vertical displacement by rotation.
scm_solution_cat.generale.indd 69 04/07/12 16.20
ST 35O CLASS
Maximum cutting height at 90° (45°) mm 118 (81)
Blade tilting 45°
Cross movement of the entire saw unit mm 165
Squaring capacity with 2200 mm carriage mm 2200 x 3200
Squaring capacity with 3200 mm carriage mm 3200 x 3200
combined saw and spindle moulderThe versatility of the very best spindle moulderscombined with the cutting quality of Scm circular saws.
Combined saw/spindle moulder
scm_solution_cat.generale.indd 70 04/07/12 16.20
71
The st350s version is even more compact and easy to use thanks to theshort carriage 2200 mm.
scm_solution_cat.generale.indd 71 04/07/12 16.20
combined saw/spindle mouldersadvantages
ALL CONTROLS AT YOUR FINGERTIPS.The operator easily manages every working operation due to the 4 hand wheels with mechanical digital readouts positioned on the front of the machine that guarantees precise settings. This ideal positioning includes the horizontal saw unit movement with respect to the spindle ensuring the maximum flexibility during end cutting machining.
SPINDLE MOULDER FENCE
WITH MECHANICAL PROGRAMMING:MAXIMUM SET-UP SPEED AND EASE-OF-USE.No more test runs due to digital readouts that ensure accuracy to a tenth of a millimetre in positioning the two worktables.
toptech SLIDING CARRIAGE: HIGHEST QUALITY OF CUT GUARANTEED FOR A LONG TIME. The carriage will never require adjustment due to to its structure with arch-ground steel slide ways (Scm exclusive and patented solution) and it can accept loads four times higher.
scm_solution_cat.generale.indd 72 04/07/12 16.20
73
SAW UNIT:A PERFECT CUT.Maximum torsional rigidity and the total absence of vibration through the closed loop structure of the saw unit which ensures perfect alignment of the blades during tilted and troublesome cuts.
scm_solution_cat.generale.indd 73 04/07/12 16.20
TEN 22O CLASS
Max. tool diameter mm 350
Tool rotating speed rpm 3600
Rapid tool changer ISO 40
Max. tool diameter mm 400
Max. cutting height mm 120
Blade rotation speed rpm 3000
tenoning machine Rapidity and precision with the rapid tool changer.
Tenoning machine
scm_solution_cat.generale.indd 74 04/07/12 16.20
75
TOOL CHANGE:INCOMPARABLE WORKING RAPIDITY.A few seconds to change the tool due to the interchangeable spindle with rapid taper. The cleaning system uses the combination of the air blowers to maintain the cleaning of the contact surfaces with the tool guaranteeing the very best safety and coupling accuracy.
scm_solution_cat.generale.indd 75 04/07/12 16.20
M 3
Feed track wide mm 300
Max. width of blades pack mm 350
Min. cutting length mm 250
Continuously adjustable feed track speed m/min 6-48
Motor powers kW (HP) 18,5/ 25,5/ 37 (25/ 35/ 50)
multiblade rip sawCompact and simply designed construction for a high performance multiblade rip saw.
Multiblade rip saw
toptech ANTI-KICKBACK FINGER BARRIERS:GUARANTEES OPERATOR SAFETY.Maximum degree of safety that is available on the market due to the exclusive Scm system using finger barriers that ensure the anti-kickback of the work piece and protection against the splinters produced during machining.
scm_solution_cat.generale.indd 76 04/07/12 16.20
77
scm_solution_cat.generale.indd 77 04/07/12 16.20
PROFISET 4O
Min/max working width (finished section) mm 23/180
Min/max working height (finished section) mm 6/105
Feed speed m/min 6-12
Spindles speed rpm 6000
Automatic planer and throughfeed moulder
planers and throughfeed mouldersVersatile, ergonomic and safe.
scm_solution_cat.generale.indd 78 04/07/12 16.20
79
Maximum compactness with minimum overalldimensions to safeguard the essential space for the operator.
scm_solution_cat.generale.indd 79 04/07/12 16.20
PLANERS AND THROUGHFEED MOULDERS PROFISET 6O PROFISET 4O
Min/max working width (finished section) mm 25 (15 opt)/230 23/180
Min/max working height (finished section) mm 6/120 6/105
Feed speed m/min - 6 - 12
Variable feed speed with inverter m/min 5 - 25 -
Spindles speed rpm 6000 6000
Axial adjustment of spindles with respect to the worktable mm 40 -
planers and throughfeed mouldersrange
scm_solution_cat.generale.indd 80 04/07/12 16.20
81
2 PROFISET 6O
Automatic planers and throughfeed moulders with up to 6 spindlesVersatile, ergonomic and safe.The planers / throughfeed moulders are sturdy machines with high quality components to always ensure the very best performance.
Automatic planer and throughfeed moulder.
scm_solution_cat.generale.indd 81 04/07/12 16.20
OLIMPIC M 8O - M 8O T
edge bander and trimming machineVersatility and ease-of-use.
Edge bander - Trimming machine
OLIMPIC M 8O OLIMPIC M 8O T
Edge thickness mm 0,5 -3 0,5 - 3
Panel thickness mm 10 - 80 12 - 80
Minimum panel width mm 50 50
Minimum panel length mm 200 200
Minimum internal radius mm 20 20
Feed speed m/min 2-10 -
Compressed air bar 6 6
scm_solution_cat.generale.indd 82 04/07/12 16.20
83
Gluing and trimming of edges on straight, round and shaped panels.
scm_solution_cat.generale.indd 83 04/07/12 16.20
edge bander and trimming machineadvantages
SIMPLE AND PRECISE SETTING OF THE TRIMMING GROUP
The trimming adjustment is carried out in few seconds and without errors by means of the Scm exclusive device which provides a pivoting ring with a decimal dial which allows the adjustment of the vertical copier without using any tool. m 80 t
A PATENTED SUPPORT SURFACE TO FACILITATE THE WORK No preparation of panel support jigs because the worktable provides supports that can be freely positioned and rotated creating a large support surface for maximum stability when processing the panel.m 80 t
toptech GLUING THE MOST CRITICAL EDGES WITHOUT COMPROMISEOptimum application of the edge on curved panels and also with particularly rigid edges due to the 2 powered pressure rollers, removable when required (Scm patent), which allow the choice of the correct configuration depending upon the geometry of the panel.m 80
scm_solution_cat.generale.indd 84 04/07/12 16.20
85
scm_solution_cat.generale.indd 85 04/07/12 16.20
STARTECH 27
semi-automatic multi-head boring machinesExcellence in semi-automatic boring.Multi-head boring machine for horizontal and vertical boring.
Multihead boring machine
STARTECH 27
Spindles no. 27
Distance between spindles mm 32
Spindles speed rpm 3000
Spindles motor power kW (HP) 1,5 (2)
scm_solution_cat.generale.indd 86 04/07/12 16.20
87
scm_solution_cat.generale.indd 87 04/07/12 16.20
BORING MACHINES MULTITECH 3PLUS
MULTITECH 2 PLUS
TOP 35 PLUSTOP 35 E PLUS
STARTECH 27
Spindles no. 21+21+21 21+21 35 27
Distance between spindles mm 32 32 32 32
Spindles speed rpm 2800 2800 2800 3000
Spindles motor power kW (HP) 1,1 (1,5) 1,1 (1,5) 4,4 (6) 2 motors 1,5 (2)
semiautomatic multihead boring machinesrange
scm_solution_cat.generale.indd 88 04/07/12 16.20
2 MULTITECH PLUS
3 TOP 35 PLUS
89
Semi-automatic multihead boring machine
Semi-automatic multihead boring machine
scm_solution_cat.generale.indd 89 04/07/12 16.20
semiautomatic multihead boring machinesadvantages
toptech THE ONLY BORER THAT DRILLS FROM THE TOP
The system of boring from the top uses the outside of the panel as a reference concealing any defects; the result is to always move any difference in panel thickness to the inside of the cabinet.top 35
EVERYTHING INCLUDED AS STANDARD
The basic supply includes everything you need to make a “rich” composition for the machine: pneumatic head rotation, side guides which can be excluded from the table and extensions L=3 metre with 4 retractable stops.startech
QUICK ATTACHMENTSFOR EASY SETTING UPThis solution enables a quick tool replacement, essential to move smoothly from one job to another, eliminating downtime.
scm_solution_cat.generale.indd 90 04/07/12 16.20
91
scm_solution_cat.generale.indd 91 04/07/12 16.20
scmadvancedmachinerycutting, edge banding, boring-routing, calibrating-sanding, assembling.
scm_solution_cat.generale.indd 92 04/07/12 16.21
93939393
scm_solution_cat.generale.indd 93 04/07/12 16.21
scmtoptechadvanced machineryMain toptech
sigma beam sawsSELECTABLE AIR BLOWING TABLE:AN ESSENTIAL TOOL. The possibility to enable / disable the air blowing feature on each table section via 4 independent motors, ensuring optimal sliding of the panels only where it is needed and avoids accidental falling of cut panels temporarily stored on the tables. This solution also provides energy saving.
sigma beam saws FLOATING CLAMPS: THE GUARANTEE OF THE END RESULT. The special shape of the clamps gently grips the panels giving the grip at the maximum speed and also perfect parallelism when panels are not perfectly planar.
olimpic edge banders “ROUND 2M”: INCOMPARABLE PRODUCTIVITY AND QUALITY WITH 2 MOTOR TECHNOLOGY. The features of the group (Scm patent) allows an 18 m/min rounding speed as well as the possibility of the simultaneous edge trimming operation. Two operations, in a single group, occupying less space, allows for a reduction in time for the edge banding of panels.
olimpic edge bandersPANEL MOVEMENT SYSTEM: DESIGNED FOR A PERFECT FINISH. The best finish of the panel edge is also guaranteed by the conveying track (Scm patent), which prevents the panel having the feed affected by the typical pulse generated by the pinion of a traditional feed track.
scm_solution_cat.generale.indd 94 04/07/12 16.21
1 4 3 2
A
AA
95
cyflex cnc boring centresBORING FROM THE TOP =PERFECT FINISH. The system of boring from the top utilises the outside of the panel as a reference so concealing defects; the result is to always move any difference in the panel thickness to the inside of the cabinet.
tech and pratix cnc machining centres“BUMPERS”: THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY. The “bumpers” safety system is the only one that can fully exploit the potential of machining centres, without placing restrictions or constraints on the use of the machine:• maximum productivity• ease-of-use• more compact dimensions• guaranteed safety
sandya wide belt sanders DIAMOND-SHAPED BELT: NO SLIPPING OF THE WORK PIECES.The special rubberised diamond-shaped profile provides the best traction surface for the work piece and the increased support area also ensures maximum stability.
sandya wide belt sanders “MESAR” SECTIONAL PAD:THE BEST FINISH WITH ANY MATERIAL. Higher quality results due to the special shape of the sectors that allows the operator to intervene “softly” but also in an “aggressive” way, simply by varying the working pressure. The setting of the pad position and the possibility of using foils of different thicknesses increases its versatility.
scm_solution_cat.generale.indd 95 04/07/12 16.21
SIGMA IMPACT P
Horizontal beam saw with loading platform
Cutting length mm 3200/3800/4500
Cutting depth on platform mm 1850/2200
Max. height of panel stack on platform with support beams mm 600
Blade projection mm 107
Variable saw carriage speed m/min 0-80
Variable pusher speed m/min 0-50
Main blade motor power (S6 –40%) kW (HP) 9 (12)
sigma pThe best solution forany cutting requirement.
scm_solution_cat.generale.indd 96 04/07/12 16.21
97
Advanced technological solutions for perfect cutting quality.At the “pinnacle” of technology but with a reduced price.
scm_solution_cat.generale.indd 97 04/07/12 16.21
sigma prange
SIGMA PRIMA P IMPACT P
Cutting length mm 3300/3800/4300 3200/3800/4500
Cutting depth on platform mm 1850/2200 1850/2200
Blade projection mm 67 107
Variable saw carriage speed m/min 0-80 0-80
Variable pusher speed m/min 0-50 0-50
Main blade motor power (S6 –40%) kW (HP) 7 (9,5) 9 (12)
scm_solution_cat.generale.indd 98 04/07/12 16.21
SIGMA PRIMA P2
99
Beam saw
scm_solution_cat.generale.indd 99 04/07/12 16.21
sigma padvantages
toptech FLOATING CLAMPS: THE GUARANTEE OF THE END RESULT.The special shape of the clamps gently grips the panels giving the grip at the maximum speed and also perfect parallelism when panels are not perfectly planar.
CARRIAGE GUIDES:GUARANTEED CUT QUALITY.Parallelism and absolute perpendicularity of the guides on which the carriage runs is guaranteed by machining of the entire frame on cnc machines. The ideal solution gives a cut that is always perpendicular and perfect.impact p
AIR BLOWING ALSO ON THE MACHINE TABLE.The sliding of heavy or delicate materials is achieved through the air blowing on the cutting table that protects against the risks of friction.impact p
scm_solution_cat.generale.indd 100 04/07/12 16.21
101
rgb
toptech LOADING PLATFORM: WHEN STURDINESS AND PRECISION MAKE THE DIFFERENCE.The lifting system, running on 4 large trapezoidal screws, as well as to maximize the load capacity in any material and format, always ensures parallel lifting of the stacks of panels avoiding downtime and achieving maximum productivity.
ADAPTIVE CONTROL OF THE CARRIAGE SPEED: SAFE WORKING.The automatic monitoring of energy absorption of the motor according to the material and the type of the saw blade used gives the best results and avoids errors and wastage. impact p
scm_solution_cat.generale.indd 101 04/07/12 16.21
SIGMA IMPACT
Horizontal beam saw
sigmaDesigned to be the very best.
87 1O7
Cutting length mm 3200/3800/4500 3200/3800/4500
Cutting depth mm 2100/3200/3800/4300 2100/3200/3800/4300
Blade projection mm 87 107
Variable saw carriage speed m/min 6-30 6-30
Variable pusher speed m/min 27 38
Main motor power (S6 –40%) kW (HP) 7 (9,5) 9 (12)
scm_solution_cat.generale.indd 102 04/07/12 16.21
103
The machine within everybody’s reach.Integration in the Netline process which manages the Design, the Programming and Furniture Automatic Production in all machining phases: Sizing, Edge Banding, Boring-Routing.
scm_solution_cat.generale.indd 103 04/07/12 16.21
sigmarange
SIGMA PRIMA 5O PRIMA 67 IMPACT 87 IMPACT 1O7
Cutting length mm 3300/3800/4300 3300/3800/4300 3200/3800/4500 3200/3800/4500
Cutting depth mm 2100/3200/3800/4300
2100/3200/3800/4300
2100/3200/3800/4300
2100/3200/3800/4300
Blade projection mm 50 67 87 107
Variable saw carriage speed
m/min 6-30 6-30 6-30 6-30
Variable pusher speed m/min 24 24 27 38
Main blade motor power(S6 –40%)
kW (HP) 7 (9,5) 7 (9,5) 7 (9,5) 9 (12)
scm_solution_cat.generale.indd 104 04/07/12 16.21
SIGMA PRIMARIMA P2
105
Beam saw
scm_solution_cat.generale.indd 105 04/07/12 16.21
sigmaadvantages
scontornarergb
toptech SELECTABLE AIR BLOWING TABLE: AN ESSENTIAL TOOL.The possibility to enable / disable the air blowing feature on each table section via 4 independent motors, ensuring optimal sliding of the panels only where it is needed and avoids accidental falling of cut panels temporarily stored on the tables. This solution also provides energy saving.
“HIGH SPEED” DEVICE: ABSOLUTE SPEED. High productivity due to:• axes speed up to 150 m/min on the beam saw carriage and 120 m/min on the pusher• optimised logic of cutting cycles on the carriage, pressure beam and pusher groups
scm_solution_cat.generale.indd 106 04/07/12 16.21
107
OVERHEAD SIDE PROTECTIONS:MORE SPACE FOR THE WOODWORKING WORKSHOP.The shape of the protections allows operators to use the large space under the rear of the machine as storage space for additional panels.
DIFFERENTIATED PRESSURE: THE PERFECT RESULT ON ANY MATERIAL.Optimal machining of “soft” materials and the ones deformable due to incorrect pressure, due to automatic and independent management of the pressure beam and clamps.impact
WINCUT: WORKING MADE EASY.Complete management of the beam saw, easily and intuitively, through the use of graphic functions including:• report of the total production• diagnostics• materials management and related processing parameters
scm_solution_cat.generale.indd 107 04/07/12 16.21
VERTICUT 6O
verticutAbsolutely easy to use.
Maximum cutting thickness mm 60
Vertical cutting height mm 2200
Horizontal cutting height mm 2080
Horizontal cutting width mm 4300
Main blade motor power -50 Hz kW (HP) 4 (5)
Main blade diameter (spindle diameter) mm 250 (30)
Scoring blade diameter (spindle diameter) mm 70 (20)
Exhaust outlets diameter mm 2 x 100 + 5 x 50
Vertical beam saw
scm_solution_cat.generale.indd 108 04/07/12 16.21
109
The vertical beam saw equipped also with the scoring blade group that guarantees optimum results on all surfaces. The semi-automatic version is also capable of satisfying the more intensive working cycles.
LINEAR GUIDES: MINIMUM EFFORT FOR THE OPERATOR.All moving groups are equipped with linear guides mounted on ball bushing pads that improve the smoothness and easy movements during the cutting phase.
scm_solution_cat.generale.indd 109 04/07/12 16.21
OLIMPIC S 1OOO
Heavy-duty edge bander
Edge thickness mm 0,4 - 15
Panel thickness mm 10 - 60
Feed speed m/min 12 - 18 (22 opt.)
Compressed air bar 6
olimpic sThe perfect solution for all edge banding production requirements.
scm_solution_cat.generale.indd 110 04/07/12 16.21
111
The best finishing quality with any type of edge.Innovative solutions at the top of edge banding specialisation.
scm_solution_cat.generale.indd 111 04/07/12 16.21
olimpic srange
OLIMPIC S S 3OOO S 2OOO S 1OOO
Edged thickness mm 0,4 - 22 0,4 - 15 0,4 - 15
Panel thickness mm 10 - 60 10 - 60 10 - 60
Feed speed m/min 12 - 18 12 - 18 12 - 18 (22 opt.)
Compressed air bar 6 6 6
scm_solution_cat.generale.indd 112 04/07/12 16.21
2 OLIMPIC S 2OOO
113
3 OLIMPIC S 3OOO
For industrial productionat the very best levels.
Heavy-duty edge bander
Heavy-duty edge bander
scm_solution_cat.generale.indd 113 04/07/12 16.21
“RT-E” PANEL EDGE TRIMMING GROUP: A PERFECT JOINT LINE ON THE EDGE.An optimum panel edge trimming group before edge gluing, due to the use of the front copying devices that allow constant material removal over the entire panel length, maintaining the same work piece geometry.s 1000 - s 2000
toptech “ROUND 2M”: INCOMPARABLE PRODUCTIVITY AND QUALITY WITH 2 MOTOR TECHNOLOGY. The features of the group (Scm patent) allows an 18 m/min rounding speed as well as the possibility of the simultaneous edge trimming operation. Two operations, in a single group, occupying less space, allows for a reduction in time for the edge banding of panels.s 1000 - s 2000
“STARTOUCH” CONTROL: JUST A “TOUCH” FOR USING THE MACHINE.Error free programming with the large dimensioned touch-screen display and its customised graphics that allows an intuitive and easy selection of the main machine functions.s 1000
olimpic sadvantages
scm_solution_cat.generale.indd 114 04/07/12 16.21
115
T-1OOO SPINDLE MOULDER GROUP: A SUITABLE GROUP FOR EVERY MACHINING REQUIREMENT.Maximum machining precision, guaranteed on the edge and on both the upper and lower panel surfaces, due to the front and vertical copiers that follow the perfect geometry of the panel.
“RAS/S 2P” EDGE SCRAPING GROUP: 2 RADII, ALWAYS AVAILABLE.The change of the machining radius is performed automatically and without errors using the two-position pneumatic device, that allows fast and precise positioning of tools and front copiers in relation to the selected edge thickness.s 1000
toptech “3 EDGE”DEVICE:A PATENT ROUNDING 3 DIFFERENT EDGES.The change of the rounding radius of the 4M rounding group is automatically carried out thanks to the exclusive patented dual tool solution that allows the immediate selection of the processing of 3 different edge thicknesses.s 1000
scm_solution_cat.generale.indd 115 04/07/12 16.21
OLIMPIC K 8OO
Automatic edge bander
Edge thickness mm 0,4 - 8 (12 opt.)
Panel thickness mm 8 - 60
Feed speed m/min 12 - 18
Compressed air bar 6
olimpic kSturdy and reliable for highest productivity and high quality machining.
scm_solution_cat.generale.indd 116 04/07/12 16.21
117
Ease of use and a high level of technology: ideal solutionfor smaller woodworking companies.
scm_solution_cat.generale.indd 117 04/07/12 16.21
olimpic krange
OLIMPIC K K 4OO K 6OO K 8OO
Edge thickness mm 0,4 - 6 0,4-3 (8 opt.) 0,4 - 8 (12 opt.)
Panel thickness mm 8 - 60 8 - 60 8 - 60
Feed speed m/min 11 (13 opt.) 11 - 16 12 - 18
Compressed air bar 6 6 6
scm_solution_cat.generale.indd 118 04/07/12 16.21
2
OLIMPIC K 6OO
OLIMPIC K 4OO
119
3
Compact edge bander
Compact edge bander
scm_solution_cat.generale.indd 119 04/07/12 16.21
olimpic krange
OLIMPIC K K 13O K 26O EVO K 8OO
Edge thickness mm 0,4 - 3 0,4 - 6 0,4 - 8 (12 opt.)
Panel thickness mm 8 - 50 8 - 60 8 - 60
Feed speed m/min 9 9 12 - 18
Compressed air bar 6 6 6
scm_solution_cat.generale.indd 120 04/07/12 16.22
5
4
OLIMPIC K 13O
OLIMPIC K 26O EVO
121
Compact edge bander
Compact edge bander
scm_solution_cat.generale.indd 121 04/07/12 16.22
“STARTOUCH” CONTROL: JUST A “TOUCH” TO USE THE MACHINE.
Error free programming with the large dimensioned touch-screen display and its customised graphics that allow an intuitive and easy selection of the main machine functions.k 400 - k 800
“RT-E” PANEL EDGE TRIMMING GROUP: A PERFECT JOINT LINE ON THE EDGE.An optimum panel edge trimming group before edge gluing, due to the use of the front copying devices, that allow a constant material removal over the entire panel length, maintaining the same work piece geometry.k 400 - k 600 - k800
toptech “ROUND 2M”: INCOMPARABLE PRODUCTIVITY AND QUALITY WITH 2 MOTOR TECHNOLOGY. The features of the group (Scm patent) allows a 18 m/min rounding speed as well as the possibility of the simultaneous edge trimming operation. Two operations, in a single group, occupying less space, allows for a reduction in time for the edge banding of panels.k 600 - k 800
olimpic kadvantages
scm_solution_cat.generale.indd 122 04/07/12 16.22
123
“K-2” END CUTTING UNIT:CUT AND “RADIUS” IN A SINGLE OPERATION.Automatic and error free cut of thick edge due to the particular system with two blades that allows also the solid wood straight cut and the chamfering of the thin edge.k 130 - k 260 evo - k 400
toptech PANEL MOVEMENT SYSTEM:DESIGNED FOR A PERFECT FINISH. The best finish of the panel edge is also guaranteed by the conveying track (Scm patent), which prevents the panel having the feed affected by the typical pulse generated by the pinion of a traditional feed track.k 130 - k 260 evo
“VC-VM” GLUE POT: ONLY A FEW SECONDS TO CHANGE THE TYPE OF GLUE.The use of different types of glue is carried out easily by the convenient patented system that with a few operations, in only 90 seconds, allows the substitution of the glue pot without the necessity of further adjustments. k 260 evo - k 400
scm_solution_cat.generale.indd 123 04/07/12 16.22
TECH Z 5
5-axes cnc machining centre with bar worktable
techDesigned to be the very best.
* = with vertical cutter
Z5-31 Z5-52
Working area along X-Y*-Z axes mm 3050 - 1550 - 160 5200 - 1550 - 160
Panel clearance in Y axis mm 1550 1550
Panel length (for alternated work process) mm 1390 2460
f18 boring head with electrospindle up to: kW (HP) - S6 12 (16,5) 12 (16,5)
Tool changers up to: 22 22
scm_solution_cat.generale.indd 124 04/07/12 16.22
125
Ideal solution to machine the sectioned panel and equipped with devices allowing solid wood machining as well. Optimised time and resources thanks to the Netline integration.
scm_solution_cat.generale.indd 125 04/07/12 16.22
tech zrange
* = with all tools
TECH Z2-27 Z2-31 Z2-52 Z1-27 Z1-3O
Working area along X-Y*-Z mm 2700-1300-160 3050-1300-160 5200-1300-160 2550x1250x120 3050x1250x120
Panel clearance in Y axis mm 1550 1550 1550 1450 1450
Panel length(for alternated work process)
mm 1210 1390 2460 1140 1390
Boring head with electrospindle up to
kW (HP) - S6 12 (16,5) 12 (16,5) 12 (16,5) 12 (16,5) 12 (16,5)
Tool changer up to 18 18 18 14 14
scm_solution_cat.generale.indd 126 04/07/12 16.22
TECH Z 13 TTECH ZZ 11
TECH Z 22
127
CNC machining centre with bar worktable
CNC machiningcentre with bar worktable
scm_solution_cat.generale.indd 127 04/07/12 16.22
tech zadvantages
HORIZONTAL ELECTROSPINDLE:HIGH WORKING SPEED.The direct output of motion power without gears and sprockets, a guarantee of sturdiness, allows the processing of heavy duty work easily and fast, without having to worry about the possible breaking of the wood or the tooling.tech z2
“NETLINE”:PROGRAMMING MACHINES AUTOMATICALLY.The automatic programming of beam saws, edge banders and machining centres, interconnected via a PC with advanced software, allows the creation of complete projects without any operator intervention and no risk of errors.
• maximum productivity• ease-of-use• more compact dimensions• guaranteed safety
toptech “BUMPERS”: THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY.The “bumpers” safety system is the only one that can fully exploit the potential of machining centres, without placing restrictions or constraints on the use of the machine:
scm_solution_cat.generale.indd 128 04/07/12 16.22
129
“AUTOSET”: BARS AND VACUUM CUPS AUTOMATICALLY IN THE CORRECT PLACE.The most practical and economical system that, using a special driving device, uses the movements of the machine body to position bars and suction cups. While the operator works on the other field, the machine prepares everything independently and without any alignmentinspection required (no laser, metric rules, or LEDs,…)
toptech “PRISMA 5” 5 AXIS ELECTROSPINDLE: OPERATING EASILY IN REDUCED SPACES WITHOUT RISK OF COLLISIONS.No limits to the possible uses of the 5-axis “Prisma 5” group which, with the patented Scm solution, allows the keeping of the overall dimensions in each direction of travel to a minimum. This results in maximum operator convenience and flexibility of use.tech z5
MECHANICAL FIXING OF VACUUM CUPS:CERTAINLY BEST RESULTS.The certainty of quality results is guaranteed by a powerful mechanical grip that locks into position the vacuum cups; instead of the widespread vacuum system. It is unrivalled when working in heavy duty conditions and unique in being free from dust (Scm patent).
scm_solution_cat.generale.indd 129 04/07/12 16.22
PRATIX Z 5
5-axes cnc machining centre with multifunction table
pratix“Multifunction” par excellence.
Z5-31 Z5-52
Working area along X-Y*-Z axes mm 3110 - 1550 - 160 5200 - 1550 - 160
Panel clearance in Y axis mm 1550 1550
Panel length (for alternated work process) mm 1390 2460
f18 boring head with electrospindle up to: kW (HP) - S6 12 (16,5) 12 (16,5)
Tool changers up to: 22 22
* = with vertical cutter
scm_solution_cat.generale.indd 130 04/07/12 16.22
131
5-axes cnc machining centre with multifunction aluminium table and “T”-shaped grooves: “top-of-the-range” for those who consider flexibility as a way of life. The very best multipurpose machine available due to the possibility to size nested panels and bore-router already sized panels.
scm_solution_cat.generale.indd 131 04/07/12 16.22
PRATIX Z 2
Cnc machining centre with multifunction table
pratix“Multifunction” par excellence.
* = with all tools
Z2- 27 Z2-31 Z2-52
Working area along X-Y*-Z axes mm 2750 - 1300 - 160 3110 - 1300 - 160 5200 - 1300 - 160
Panel length (for alternated work process) mm 1210 1390 2460
f18 boring head with electrospindle up to: kW (HP) - S6 12 (16,5) 12 (16,5) 12 (16,5)
Tool changers up to: 18 18 18
scm_solution_cat.generale.indd 132 04/07/12 16.22
133
Cnc machining centre with multifunction aluminium table and “T”-shaped grooves: “top-of-the-range” for those who consider flexibility as a way of life. The very best multipurpose machine available due to the possibility to size nested panels and bore-router already sized panels.
scm_solution_cat.generale.indd 133 04/07/12 16.22
pratixrange
PRATIX PRATIX N 12 PRATIX N 15 PRATIX S 12 PRATIX S 15 PRATIX S 22-31
Working area along X-Y*-Z axes mm 2440-1220-150 3660-1550-150 2480-1250-150 3686-1555-150 3100-2250-150
Vectorial speed along X-Y axes mm 56 56 35 35 35
Boring head with electrospindle up to:
(HP) - S6 12 (16,5) 12 (16,5) 6,6 (9) 6,6 (9) 6,6 (9)
Tool changers up to: 20 20 8 10 14
* = with all tools
scm_solution_cat.generale.indd 134 04/07/12 16.22
2 PRATIX N
PRATIX S3
135
High performance cnc machining centrewith multifunction table
“Entry-level” cnc machining centrewith multifunction table
Why choose the pratix?Because it is the ideal machine for those who have machining with nesting requirements.
scm_solution_cat.generale.indd 135 04/07/12 16.23
pratixadvantages
SAFE AND COMPACT.
Ideal for those with limited available space,it is distinguished by: • absence of perimeter protections• protections mounted directly on the mobile upright• also free access to the rear of the machinepratix s
BORING HEADS: NO MORE MACHINE DOWNTIME.The sturdiness of Scm boring heads is proven by the frequency of required maintenance, only every 1000 hours, five times better than that imposed by the majority of other machine manufacturers: indestructible and with low maintenance.
• maximum productivity• ease-of-use• more compact dimensions• guaranteed safety
toptech “BUMPERS”: THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY.The “bumpers” safety system is the only one that can fully exploit the potential of machining centres, without placing restrictions or constraints on the use of the machine:
scm_solution_cat.generale.indd 136 04/07/12 16.23
137
“TECPAD” EASE OF USE AND PRODUCTIVITY AT FINGER TIPS.The “Tecpad” standard remote control with LCD display, with 7” colour touch-screen allows the operator to fully manage the machine intuitively. The commands are always close to both the machine and the operator. pratix s
“HE” WORKTABLE:DESIGNED FOR EFFICIENCY AND SAVING. Careful studies and tests allow us to achieve a high level of work piece holding down without resorting to several high-power vacuum pumps. The result:• secure hold down of the work piece = excellent machining speed• internal flows’ speed of up to 250Km/h = efficiency on the whole worktable • less consumption = energy saving (ecologically beneficial)pratix s - pratix n
toptech “PRISMA 5” 5 AXIS ELECTROSPINDLE: OPERATING EASILY IN REDUCED SPACES WITHOUT RISK OF COLLISIONS.No limits to the possible uses of the 5-axis “Prisma 5” group which, with the patented Scm solution, allows the keeping of the overall dimensions in each direction of travel to a minimum. This results in maximum operator convenience and flexibility of use.pratix z5
fluid dynamic analysis
scm_solution_cat.generale.indd 137 04/07/12 16.23
CYFLEX F 9OO
Cnc boring centre
cyfl exVery high flexibility, very high productivity,very high precision.
Why choose the cyflex?• carries out all boring and vertical routing operations• carries out grooving• no operator’s intervention for work table tooling• very compact overall dimensions
F 9OO
Max. panel dimensions along X-Y-Z axes mm 3050 x 900 x 50
Min. panel dimensions along X-Y-Z axes mm 150 x 70 x 10
Max. X-Y axes speed m/min 40
Boring head: vertical/horizontal spindles, blade in X no. 12/6
Electrospindle motor power kW (Hp) 5,5 (7,5)
scm_solution_cat.generale.indd 138 04/07/12 16.23
139
scm_solution_cat.generale.indd 139 04/07/12 16.23
cyfl exrange
CYFLEX H 8OO F 9OO
Max. panel dimensions along X-Y-Z axes mm 3050 x 800 x 60 3050 x 900 x 50
Min. panel dimensions along X-Y-Z axes mm 200 x 80 x 10 150 x 70 x 10
Max .X-Y axes speed m/min 18 40
Boring head: vertical spindles/horizontal spindles, blade in X no. 8/6 12/6
Electrospindle motor power kW (Hp) - 5,5 (7,5)
scm_solution_cat.generale.indd 140 04/07/12 16.23
2 CYFLEX H 8OO
141
Cnc boring centre
The perfect machine to commence boring successfully.The new Scm boring centre: the matching point between a woodworking workshop and industrial companies.
scm_solution_cat.generale.indd 141 04/07/12 16.23
cyflexadvantages
AAAAA
AA
1 4 3 2
A
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
toptech BORING FROM THE TOP= PERFECT FINISH.The system of boring from the top uses the outside of the panel as a reference concealing defects; the result is to always move any difference in thickness to the inside of the cabinet.
WORKTABLE:ZERO SET UP TIME.The study of the worktable has been aimed to help operators deal with any work without the slightest adjustment.
AUTOMATIC READING OF THE WORK PIECE LENGTH: PERFECT JOINTS.Any discrepancy between the actual length of the panel and the one set is corrected by a precision reading laser allowing for perfect alignment.
scm_solution_cat.generale.indd 142 04/07/12 16.23
143
scm_solution_cat.generale.indd 143 04/07/12 16.23
GS
Automatic press
gsThe best choice for pressing panels, doors and furniture.
GS 25-13 GS 3O-13 GS 35-13 GS 35-16 GS 38-16
Dimensions 2500 X 1300 3000 X 1300 3500 X 1300 3500 X 1600 3800 X 1600
No. of. cylinders 6 6 8 8 10
Tonns 90/120 90/120 120/160 160 200
scm_solution_cat.generale.indd 144 04/07/12 16.23
2 GS
145
High technology for pressingpanels, doors and furniture.
Press with intermediate worktable
scm_solution_cat.generale.indd 145 04/07/12 16.23
SM - SM K
smFrom the small woodworking workshopto the window production plant.
SM 3O-17 SM 3O-2O SM 35-25 SM K 3O-17 SM K 3O-2O SM K 35-25
Dimensions 3000 X 1700 3000 X 2000 3500 X 2500 3000 X 1700 3000 X 2000 3500 X 2500
Vertical thrust (tonns) 14 14 14 10 10 10
Horizontal thrust (tonns) 6 6 6 4 4 4
Frame press
scm_solution_cat.generale.indd 146 04/07/12 16.23
SM K2
147
High power combined to high gluing performance on any kind of window system: windows, slatted shutters, shutters and solid wood doors.
Frame press
scm_solution_cat.generale.indd 147 04/07/12 16.23
fare ombraalla macchinafaffafafafafafafafaffafafaf rererererrererererereree ooooooooooooombbbmbmbmbmbmbmmbmbmbmbmbbbmbrarararrarararararrarararaalalaaalaaalalaaalaaalala lalalaalaalalllaaaaaaalalaaaa mmmmmmmmmmacaccaa chchhhchininininaaa
ASSEMBLA P - ASSEMBLA EASSEMBLA P - ASSEMBLA E
“Comb” system cabinet assembly clamp - cabinet assembly clamp
assemblaPerfection, straight-sided, in-square results for furniture assembly.
P E
Min./max. working length mm 100/2500 100/2500
Min./max. working height mm 180/1300 180/1300
Min./max. working depth mm 100/700 100/700
Machine height and depth m/min 2200/1500 2200/1500
Installed power kW 1,5 1,5
scm_solution_cat.generale.indd 148 04/07/12 16.24
2
149
ASSEMBLA E
For rapid, precise and easy assembly of all modern furniture.
FINISH PROCESSING IN “CONTINUOUS” MODE:
THE MANUFACTURING TIME OF THE FURNITURE IS REDUCEDThe possibility to push the produced pieces towards the opposite side with respect to the infeed allows the operator to obtain finished and packed products without managing them so many times, all this by means of a touch-screen control.
Cabinet assembly clamp
scm_solution_cat.generale.indd 149 04/07/12 16.24
SANDYA 16 S
Automatic wide belt sander
sandyaAutomatic wide belt sanderswith 2 or 3 operating groups.
11O 135
Working width mm 1100 1350
Min/max working thickness mm 4-170 4-170
Sanding belt width mm 1115 1370
Sanding belt length mm 2620 2620
Standard main motor power (model with 2 groups) kW (HP) 11 (15) 11 (15)
Standard motor power of the two main motors (model with 3 groups) kW (HP) 11 (15) 11 (15)
Feed belt speed m/min 4,5/9 4,5/9
scm_solution_cat.generale.indd 150 04/07/12 16.24
SANDYA 9 S
151
High quality and production performance: “typical” of the industrial level of machines.High degree of finishing and optimum production levels with every type of machining: solid wood calibratingand sanding, plus veneer, lacquer and painted panel sanding.
Automatic wide belt sander
11O 135
Working width mm 1100 1350
Min/max working thickness mm 4-170 4-170
Sanding belt width mm 1115 1370
Sanding belt length mm 2620 2620
Standard main motor power (model with 2 groups) kW (HP) 11 (15) 11 (15)
Standard motor power of the two main motors (model with 3 groups) kW (HP) 11 (15) 11 (15)
Feed belt speed m/min 4,5/9 4,5/9
scm_solution_cat.generale.indd 151 04/07/12 16.24
sandyarange
SANDYA 6OO 9 S 16 S
11O 135 11O 135 11O 135
Working width mm 1100 1350 1100 1350 1100 1350
Min/max working thickness mm 4-170 4-170 4-170 4-170 4-170 4-170
Sanding belt width mm 1115 1370 1115 1370 1115 1370
Sanding belt length mm 2150 2150 2620 2620 2620 2620
Standard main motor power (model with 2 groups) kW (HP) 11 (15) 11 (15) 11 (15) 11 (15) 11 (15) 11 (15)
Standard motor power of the two main motors (model with 3 groups) kW (HP) 11 (15) 11 (15) 11 (15) 11 (15) 11 (15) 11 (15)
Feed belt speed m/min 4,5/9 4,5/9 4,5/9 4,5/9 4,5/9 4,5/9
scm_solution_cat.generale.indd 152 04/07/12 16.24
SANDYA 6OO3
153
Automatic wide belt sander
Always at the “top” level of performance with the Scm wide belt sandersthat ensures maximum versatility, productivity and quality
scm_solution_cat.generale.indd 153 04/07/12 16.24
sandyaadvantages
toptech “MESAR” SECTIONAL PAD: THE BEST FINISH WITH ANY MATERIAL. Higher quality results due to the special shape of the sectors that allows the operator to intervene “softly” but also in an “aggressive” way, simply by varying the working pressure.The setting of the pad position and the possibility of using foils of different thicknesses increases its versatility.
AUTOMATIC TABLE POSITIONING:PRACTICALITY AND PRECISION TOGETHER.The automatic detection of the work piece thickness allows precise machining at all times and without the risk of operator error. The decimal setting of this system also allows setting the work depth independently of the material.
“HPL” PLANER GROUP:MAXIMUM REMOVAL COUPLED WITH MAXIMUM SAVINGS. One single pass to perform heavy material removal with the absorption of low power; a degree of finish comparable to 4 abrasive belts due to the helicoidal positioning of the knives mounted on the group. The easy access allowed by the exclusion of the infeed rollers simplifies maintenance operations.
scm_solution_cat.generale.indd 154 04/07/12 16.24
155
“LOGIC SC” ELECTRONIC PROGRAMMER:EASILY AVOID MISTAKES. Simple and intuitive, allowing the operator to set all processing parameters in sequence and then launch them with the touch of a button. The possibility to store various work programs to retrieve the machine settings most commonly used makes it ideal even for unskilled operators.
toptech DIAMOND-SHAPED BELT:NO SLIPPING OF THE WORK PIECES. The special rubberised diamond-shaped profile provides the best traction surface for the work piece and the increased support area also ensures maximum stability.
LONG BELTS: 2.620 MM LENGTH FOR GREATERFINISHING AND PRODUCTIVITY.Better cooling of the abrasive grit due to the greater development of the belts that reduces the adherence of processed dust. An extended belt length lasts longer, requires fewer replacements and consequently less downtime. sandya 9s - sandya 16s
scm_solution_cat.generale.indd 155 04/07/12 16.24
SANDYA 3OO
sandyaWide belt sanders with 1 or 2 groups.
95 11O
Working width mm 95o 1100
Min/max working thickness mm 4-170 4-170
Sanding belt width mm 970 1115
Sanding belt length mm 1900 1900
Standard main motor power (model with 2 groups) kW (HP) 11 (15) 11 (15)
Feed belt speed m/min 4,5/9 4,5/9
Automatic wide belt sanders
scm_solution_cat.generale.indd 156 04/07/12 16.24
SANDYA SYSTEM FIVE
157
Automatic wide belt sander
Working width mm 1100
Min/max working thickness mm 4-170
Sanding belt width mm 1115
Sanding belt length mm 2.150
Standard main motor power (model with 2 groups) kW (HP) 11 (15)
Feed belt speed m/min 4,5/9
Designed for the woodworker who is looking to the future.Best solutions for all requirements with the availability of machines set-up. “System Five” group: one group, five different settings for every type of surface.
scm_solution_cat.generale.indd 157 04/07/12 16.24
sandyarange
SANDYA 1 S SYSTEM FIVE 3OO
95 11O 95 11O
Working width mm 950 1100 950 1100
Min/max working thickness mm 4-170 4-170 4-170 4-170
Sanding belt width mm 970 1115 970 1115
Sanding belt length mm 1.525 2.150 1900 1900
Standard main motor power (model with 2 groups) kW (HP) 5,5 (7,5) 11 (15) 11 (15) 11 (15)
Feed belt speed m/min 4,5/9 4,5/9 4,5/9 4,5/9
scm_solution_cat.generale.indd 158 04/07/12 16.24
159
SANDYA 1 S3
Automatic widebelt sander
scm_solution_cat.generale.indd 159 04/07/12 16.24
sandyaadvantages
toptech “MESAR” SECTIONAL PAD: THE BEST FINISH WITH ANY MATERIAL. Higher quality results due to the special shape of the sectors that allows the operator to intervene “softly” but also in an “aggressive” way, simply by varying the working pressure.The setting of the pad position and the possibility of using foils of different thicknesses increases its versatility.
AUTOMATIC TABLE POSITIONING:PRACTICALITY AND PRECISION TOGETHER.The automatic detection of the work piece thickness allows precise machining at all times and without the risk of operator error. The decimal setting of this system also allows setting the work depth independently of the material.
“LOGIC SC” ELECTRONIC PROGRAMMER:EASILY AVOIDING MISTAKES. Simple and intuitive, allowing the operator to set all processing parameters in sequence and then launch them with the touch of a button. The possibility to store various work programs to retrieve the machine settings most commonly used makes it ideal even for unskilled operators.
scm_solution_cat.generale.indd 160 04/07/12 16.24
161
COMPACT TO PROVIDE MORE FLOOR SPACE.The very much reduced size of all Sandya wide belt sanders simplifies their positioning in the workshop, while maintaining the performance and production potential of the sanders.
“SYSTEM FIVE”: 1 GROUP , 5 TYPES OF WORK. Maximum versatility and extremely compact machine size with the possibility to run different processes ranging from calibration to sanding with only the use of the system five group.sandya system five
toptech DIAMOND-SHAPED BELT:NO SLIPPING OF THE WORK PIECES. The special rubberised diamond-shaped profile provides the best traction surface for the work piece and the increased support area also ensures maximum stability.
scm_solution_cat.generale.indd 161 04/07/12 16.24
scm_solution_cat.generale.indd 162 04/07/12 16.24
passiontechnologyperformance
www.scmgroup.com
21
foreign branches
35O agents and distributors
3.OOO
square metres showroom
1
large integratedgroup
more than 5O years in business
365
registered patents
1O.OOO
classical and professionalmachines madeper year
18
production sites
7O%
exports
5OO
engineers
24O.OOO
square metresof production space
29
specialistbrands
scm_solution_cat.generale.indd 163 04/07/12 16.24
thanks to SANPATRIGNANO
photos ALESSANDRO ROCCHI
rev. n. 01 - 06/2012prepress OLIMPIA
print RAMBERTI
scm_solution_cat.generale.indd 164 04/07/12 16.24