rwebsite: brouchure .pdf · doha bay construction materials w.l.l. for construction chemicals...

User

Typewritten Text

BECON TRADING & CONTRACTING.W.L.L Phone:+974-44552022,2033 Fax:+974-44552044 Mobile:+974-33061439 E-mail:[email protected] Website:www.becon.com.qa

CONTENTS

Company Profile

1 Adhesive:

- Delta Tile Glue FX901- Delta Tile Glue FX903- Delta Grout (GP)- Delta Grout (NS)- Delta Bond SBR- Delta Cleaner

2 Water Proofing:

- DS Membranes- PY Membranes- Delta Bitumen Primer- Delta Rubberised Bitumen Emulsion- Delta Bitumen Emulsion (Water Based)- Delta Coat 245- Delta Polysulphide Joint Sealant

3 GeoTextile:

- GeoTextile TF80 - P- GeoTextile TF100 - P

4 Sheetrock:

- Sheetrock Brand

DOHA BAY Construction Materials W.L.L. for construction chemicals (DELTA) was established in 2006 and is now a growing manufacturer of construction chemicals in Doha, Qatar with a vision to be one of the leading manufacturers of construction chemicals in Qatar. The core portfolio comprises of Tile Adhesives, Grouts, Repair Mortars, Admixtures for Concrete, Water Proofing Chemicals and Sealants to provide best solutions for the construction industry.

DOHA BAY’s in - depth industry knowledge helps address issues specific to client’s problems. An unmatched research infrastructure with staff and technical experts who have worked in various multinational companies with the ability to generate quality products, ensures to serve its clients extraordinarily well. Our experts at DOHA BAY offer comprehensive solutions that open up infinite possibilities for its customers’ satisfaction. To offer world - class products with expertise for customer satisfaction.

DOHA BAY has planned to satisfy millions of lives by strengthening and beautifying houses, offices etc in the coming years. Several factors have contributed to this remarkable record of successes, but one stands above all others: our unwavering commitment to quality.

OUR MISSION:To be one of the leading construction chemical manufacturers in the GCC.

To offer intelligent solutions based on innovative products and tailor made services to our clients.

OUR VISION:DOHA BAY Construction Materials W.L.L. is a new generation company flouted by technical experts who have worked in multinationals of this field to provide the best solutions for the construction industry.

To establish trust with our customers so that they view us as their partner of choice.

To strive for sustainable development

Research and Development: The key to our success is our ability to generate innovative products and capabilities.

Infrastructure:

DOHA BAY has a manufacturing facility equipped with state-of-the-art technology. A modern lab consisting of latest testing machines to test sealant, concrete admixture, paint, water proofing products and other construction chemicals. Latest manufacturing facilities speed up process of inventory and dispatching.

Product Range:

• Tile Adhesive • Grouts • Waterproofing Chemicals • Water Repellents • Concrete Admixtures • Joint Sealants • Specialty Coatings

DOHA BAY (DELTA) products have performed and proved quality in the most stringent conditions. Our products are user friendly and cost effective. Raw materials are sourced from major reputed European manufacturers.

DOHA BAY (DELTA) also specializes in cementitious waterproofing systems (2 parts cementitious waterproofing). All our materials confirm to ASTM and DIN standards.

DOHA BAY (DELTA) relies in its philosophy that success is the sum of individual contributions from every member of the staff and interaction of all departments resulting in an efficient, competitive and personalized service to have constant innovation and higher standards.

- Delta Tile Glue FX901- Delta Tile Glue FX903- Delta Grout (GP)- Delta Grout (NS)- Delta Bond SBR- Delta Cleaner

1 - Adhesive

DELTA TILE GLUE FX-901(For Interior And Exterior Tile Adhesive)

DELTA TILE GLUE FX901- is a cement-based tile adhesive for interior and exterior use. It is specially designed to fix all types of ceramic tiles and marbles in permanent exposure to high degree of humidity (outside use). Possible substrates are concrete, morter rendering and cardboard plaster.

Properties:

- Easy to use (only mix with water) - High bonding on all supports - Waterproof (long term immersion will not affect the properties)

Standards: Applicable standards BS 5980, BS 5385 Part 1.

Characteristic :

Appearance White | Grey Powder

Working Temperature +50 C to +350 C

Water Ratio 4 to 6 ltrs/20kg

Coverage 4-5kg/m2 (with a 5mm notched trowel)

Shelf life 12 months stored at 250 C to 300 C in original packing.

Initial setting 25 to 30 minutes

Tensile Strength > 0.5N/mm2

Compressive Strength > 20N/mm2


Instruction for Use :

Surface: Surface must be clean, free from dust and greasy matter. If dry moisten the substrate lightly, never moisten the tiles.

Product Preparation: Mix DELTA tile adhesive in the proportion of 4 to 6 litres of water for 20kg of powder and mix with a low speed mixer. Let the mixture stand for 10 minutes for the resins to dissolve completely.

Product Application: Apply DELTA tile adhesive evenly on the substrate with a notched spatula to give uniform thickness. Then fix the tiles on the substrate and press them firmly so that the bonding is perfect and the tiles do not slide.

Packing: 20 kg plastic bag.

Precaution - Health and Safety: As with all chemical products, caution should always be exercised. Protective clothing, such as gloves and goggles should be worn. Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately. Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure a product is stored as instructed on the safety section of the labeling.

Storage: All materials should be stored under cover and clear of the ground. Protect from all sources of moisture and frost. Rotate stock in order not to exceed the shelf life of 12 months. Wind and direct sunlight must be avoided.

Technical Supports: DELTA provides on site technical assistance and guidance for use of our products. For further information consult DELTA technical services.


DELTA FX 903 is a cement-based, polymer modified and non shrink tile adhesive for thin and thick bed fixing of ceramic tiles in interior and exterior situation, especially those exposed to permanent wet conditions. It is suitable for fixing materials such as stone cladding and brick slip. Best suited for tropical climates.

Applications: It is suited for swimming pool and shall be use in confidence in all wet process application including, shower room, kitchens, bathrooms and high risk claddings for extreme conditions such as vibration or temperature extreme

Advantages:

- Waterproofing immersion will not affect adhesion. - No slip. - Ready to use-just add water. - Long open time. - High bonding strength. - Forms a waterproof bond.

Characteristic:

Appearance White | Grey Powder

Working Temperature +50 C to +400 C


Coverage 5-6kg/m2 (with a 5mm notched trowel)

Shelf life 12 months stored at 300 C inoriginal packing


Tensile Strength 28 days 2 N/mm2 (EN1348 A)1.8 N/mm2 (EN1348B)

Compressive Strength 28 days 20N/mm2

Wet Density 2.1 kg/ltr


Instruction for Use:

Surface Preparation: Surface must be clean, free from dust and greasy matter. If dry moisten the substrate lightly, never moisten the tiles. Smooth surfaces should be sand blasted. Saturate absorbant concrete surfaces to surface saturated dry condition.

Product Preparation: Mix DELTA FX 903 in the proportion of 4 to 5 liters of water for 20kg of powder and mix with a low speed mixer to get a paste of thick consistency. Let the mixture stand for about 10 minutes for the resins to dissolve completely.

Product Applications: Apply DELTA FX 903 evenly on the substrate with a notched spatula to give uniform thickness. Then fix the tiles on the substrate and press them firmly with a twisting action so that the bonding is perfect and the tiles do not slide.

Packing: 20 kg plastic bag.

Standards: Tested in laboratory in accordance with BS5980:1980

8.2 of BS EN 1999 :13488.4 of BS EN 1999 : 1348

Surpasses EN standard for C 1 Ceramic tile adhesion

Precaution - Health and Safety: As with all chemical products caution, should always be exercised. Protective clothing such as gloves and goggles, should be worn. Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately. Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure a product is stored as instructed on the safety section of the labelling.



DELTA GROUT (GP)Cementitious Grout For Tiles

DELTA GROUT (GP) is a single component polymer modified non-shrinking tile jointing grout suitable for joints upto 4 mm. It is suitable for use in tropical climatic conditions. For wider joints, consult DELTA technical department.

Uses: DELTA GROUT (GP) is suitable for internal and external conditions. Can be used for kitchen, bathrooms, swimming pools and exterior walls. Suitable for ceramic, mosaic, stone, marble and brick etc. Standards: Applicable standards are

- ANSI A 118.6:1992 Clause H4.3, - ANSI A 118.6:1992 Clause H3.4, - BS 1980 :5980, Appendix D

Characteristic:

Instruction for Use: DELTA GROUT(GP) must be used after 24 hours of tilling allowing to set. Mix Delta Grout with clean water in the ratio of 5 to 6 ltrs for 20kg to obtain a soft pasty mixture. Stir the mixture well and let it rest for 10 minutes.

Product Application: Apply the pasty mixture with a rubber spatula and make it penetrate into the joints to fill all gaps. Use the product within a maximum of 2 hours after mixing. Clean the surrounding of the joints 2 hours after application with a slightly wet sponge.

Appearance Powder

Colors See color chart

Powder Density 1.17

Working Temperature +50C to + 350C



Compressive Strength >25 N/mm2

Adhesion >1.5 N/mm2

DELTA GROUT (GP)Cementitious Grout For Tiles

Consumption: Examples of consumption in kg/m2

Packing: Available in 10 plastic sacks.

Precaution - Health and Safety: As with all chemical products,caution should always be exercised. Protective clothing, such as gloves and goggles should be worn. Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed do not induce vomiting but call for medical assistance immediately. Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure a product is stored as instructed on the safety section of the labelling.



Joint Width In mm Tile Format In cm

5*5 10*10 11*25 15*15 20*20 30*30

2 0.6 0.3 0.3 0.4 0.3 0.2

5 1.3 0.7 0.9 0.9 0.7 0.6

5 -- -- -- -- 1.2 0.8

10 -- -- -- -- 1.5 1.0

DELTA GROUT (NS)Non-Shrinking Grout

DELTA GROUT(NS) is a premixed cementitious non-shrink, high strength, precision grout that expands in two stages to sufficiently counteract the plastic shrinkage. Suitable for use in tropical and hot climates. Available in pouring grade.

SCOPE OF USE: DELTA GROUT(NS) can be used in all grouting situation where shrinkage is undesirable

- Grouting bearing plates and column bases - Fixing of machinery foundation - Columns in precast concrete - Pre-fabricated unit joints - Grouting of rock bolts

PROPERTIES:

- Non-metallic content - Avoids corrosion and prevents rust - Composition allows high early strength - Developments without the use of chlorides, - Also available as a fast setting mortar

STANDARS: Applicable standards are

- ASTM C878, ASTM C827 - Complies with ASTM C 1329 and C 91

CHARACTERISTICS:

Appearance Grey Powder

Apparent Density 1.56

Grain Size 0.04 - 1 mm

Fresh Wet Density 2200 kg/m3

Setting time at 250 C .hr Fluid initial >1.00Fluid final >7.00

Compressive Strength@w/p=0.15 ASTM C109

21 Days > 40 N/mm2

Flexural Strength 21 Days > 10 N/mm2

DELTA GROUT (NS)Non-Shrinking Grout

Instruction for Use:

The substrate should be clean, sound free from dust or demoulding products, the substrate should be moist ended.

Mix DELTA GROUT (NS) with 3.5 to 4 liter of clean water per bag of 25kg to obtain the required consistency. After mixing allow the mixture to stand for 10 minutes for the resins to dissolve.

Application:

DELTA GROUT (NS) should be applied within one hour of mixing. For horizontal application it should be poured continuously and the formwork should be tapped gently. For vertical surfaces the grout should be injected from the top and the surface should be exposed to atmosphere. Moisten or apply curing compound to prevent cracking. Do not vibrate. DELTA GROUT (NS) can be placed in a thickness of 50mm in single pour.

Packing: In 25kg plastic sacks.

Precaution - Health and Safety: As with all chemical products, caution should always be exercised. Protective clothing, such as gloves and goggles should be worn. Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately. Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure a product is stored as instructed on the safety section of the labeling.



DELTA BOND SBR(Bonding Agent For Cement Mortar)

DELTA BOND SBR is a styrene butadiene co-polymer latex. It is used where good adhesion and water resistance are required for site made cementitious mortars.

Properties: The product is extremely stable in cement and is added to cement based mortars to give the following properties.

- Good flexural and compressive strength. - Improves mortar plasticity. - Resistant to gasoline, oils and salt. - Reduces shrinkage. - Excellent water resistance. - Increased abrasive and chemical resistance. - Non corrosive. - Does not re emulsify. Standards: DELTA BOND SBR is tested in accordance to BS6319 part 4. ASTM1042, Type II Suitable for use in mortar in contact with drinking water.

Scope of Use:

- Industrial Flooring - Basecoat for renderings - Concrete repair - Drinking water reservoirs - Abrasion resistant linings - Jointing mortar for masonry - Cement based adhesives.

Characteristic:

Appearance Milky white liquid

Specific Gravity 1.00 + 0.05

Solid Content 38 – 40%

PH 9

Solubility Miscible in water

Chloride Content Nil (EN 934 -2)

Instruction for Use: The surface must be clean, sound free from all dirt and greasy matter. Wash the surface with water before application.

DELTA BOND SBR(Bonding Agent For Cement Mortar)

Floor Screeds: Prime the surface with DELTA BOND SBR diluted with water at the ratio of 1 to 2.While the surface is still tacky pour the screed mixed with DELTA BOND SBR at a dosage of 3% to 8% of the weight of cement. Spread the screed and smoothen it manually or by means of a slating machine.

For jointing the mortars, tilling and repair works: Depending on the application and performance required DELTABOND can be mixed with clean water within the range of 1:1 to 1:4.

Slurry preparation: A bonding slurry typical mix is as given below,

- 1 part of cement - 3 to 4 parts of coarse aggregates - 0.05 to 0.1 parts on weight of cement of DELTA BOND SBR.

Precautions: Wind and direct sunlight must be avoided. In strong wind it is recommended to cover the surface with a polyethylene foil.

Note: DELTA BOND SBR has high storage stability. It is stable even at temper-atures as low as -20 C, but storage temperatures should not exceed +450 C. There is a slight tendency of creaming, so DELTA BOND SBR should be stirred before use.

Packing: In 4 and 20 ltrs, plastic can.

Precaution - Health and Safety: As with all chemical products, caution should always be exercised. Protective clothing such as gloves and goggles should be worn. Treat any splashes to the skin or eyes with fresh water imme-diately. Should any of the products be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately. Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure a product is stored as instructed on the safety section of the labeling.


Technical Supports: DELTA provides on site technical assistance and guid-ance for use of our products. For further information consult DELTA technical services.

DELTA CLEANERCleaner For Ceramic And Porcelan Tiles

DELTA CLEANER is a concrete solvent that attacks mortar and lime. It is used to clean tiles and marble. It removes all traces of laitance, splashes of mortar and other dirt and stains from tiles.

Application:

- Cleaning molten glass tiles - Cleaning of ceramic and sand stone tiles - Removal of laitance traces or mortar splashes from tools

Preliminary tests are recommended to ensure DELTA CLEANER does not react with the support to be cleaned.

Instruction for Use: The way to apply DELTA CLEANER depends on the surface or subject to be treated, with a paint brush or with a floor mop.Apply DELTA CLEANER and wait for a few minutes wipe or brush and flush with water.

Repeat the operation if necessary.

For cleaning tools the layer of dry mortar must be properly soaked. It is then scraped with a sharp blade and washed with water.

Precautions: Avoid splashes of DELTA CLEANER into the eyes, mucous membrane and wounds.Wash with plenty of water after contact with product as it is corrosive.

Colors None

Density 1.04 Kg/l

Viscosity < 40 cp Brookfeild

Ph 1

DELTA CLEANERCleaner For Ceramic And Porcelan Tiles

Packing: Packing in 4ltrs plastic cans.

Precaution - Health and Safety: As with all chemical products, caution should always be exercised. Protective clothing, such as gloves and goggles, should be worn. Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed,do not induce vomiting, but call for medical assistance immediately. Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure the product is stored as instructed on the safety section of the labeling.



- DS Membranes- PY Membranes- Delta Bitumen Primer- Delta Rubberised Bitumen Emulsion- Delta Bitumen Emulsion (Water Based)- Delta Coat 245- Delta Polysulphide Joint Sealant

2 - Water Proofing

DS MEMBRANESDS30, DS 30200, DS 40, DS 40200, DS 40250, DS 50APP modified, polyester carrier

Description: High performance polymer modified bituminous membranes, re-inforced with non-woven polyester mat. The polyester combines high tensile strength and an elongation above 40%. The special polymer modified used has great resistance to Ultra-Violet radiation.

Features:

- Durable and easy to apply. - High flexibility at low temperature. and stability at high temperatures. - Remarkable resistance to aggressive attack of salts and chemicals. - High tensile strength and elongation. - Excellent puncture resistance.

Functions: Used as double layers for tanking in basements or single and/ or double for waterproofing of roofs. A plain layer followed by a layer or mineral surfaced DS should be used in exposed roofs.

Instructions for Applications: These membranes can be installed fully bonded or loose-laid by torch welding. The substrate should be cleaned and primed with AWAZEL PRIMER D41 and allowed to dry. Torching should be done by skilled labor and should be controlled so that only the PE film is melted and the asphalt coating is sufficiently softened to bond the membrane. All lap joints should be smoothed and sealed using a heated round-nosed trowel. The heat of the gas flame should be applied to the trowel. In loose-laid applica-tions, only the lap joints, areas around penetrations (pipe etc.), up stands and a 30cm wide stripe around the perimeter of the work should be fully bonded. Up stands and flashing should be installed using 1m wide pieces cut from the length of the roll. (The overlap joints should be 5 to 10cm at the side and 15cm at the end).

Coverage: 1.12m per layer for flat surfaces.

Health and Safety: All safety measures should be observed during application. Fire extinguishers should be available at the site. Protective gear such as gloves and goggles should be worn by personnel during application.

Precautions: No special precautions are needed.

DS MEMBRANESDS30, DS 30200, DS 40, DS 40200, DS 40250, DS 50APP modified, polyester carrier

Packing: Produced in rolls of 1 x 10 and 1 x 8 meters; special lengths area available upon request. Rolls are palletized and shrink-wrapped.

Surfacing: Standard surfacing is PE Film on top and bottom. Different combinations of top surfacing are available upon request such as sand, colored minerals etc.

Storage and Material Handling: Rolls should always be stored vertically in shaded area. Normally, pallets should not be stacked one over the other. However, if a wooden board is used in between 2 pallets may be stacked, one over the other.

DESERT SHIELD MEMBRANESDS30, DS 30200, DS 40, DS 40200, DS 40250, DS 50APP modified, polyester carrier

TECHNICAL DATA

Properties

Roll Size, m

Nominal Thickness, mm

Nominal UnitWeight, kg/m2 (plain)

Nominal UnitWeight, kg/m2 (Mineral Surfaced)

Carrier (Polyester) Weight, g/m2

Coating Asphalt Type Softening Point (RandB), oC Penetration at 25oC, 0.1 mm

Tensile Strength, N/5cm Longitudinal Transversal

Elongation at Break, % Longitudinal Transversal

Lap joint Strength, N/5cm Longitudinal Transversal

Tear Resistance, N Longitudinal Transversal

Load Strain Product Longitudinal Transversal

Cold Flexibilityat 0oC – 5oC

Heat Resistanceat 135oC

Resistance to Water pressure

Water Absorption, (BSP)

Puncture Resistance: Static Dynamic

Resistance to Aging after 2000 hours (Accelerated Weathering Tester)

Test Method

UAEtc, M.O.A.T 30

ASTM D 5147UAEtc, M.O.A.T 30

UAEtc, M.O.A.T 30

UAEtc, M.O.A.T 30

UAEtc, M.O.A.T 30

ASTMD D 36ASTMD D 5

UAEtc, M.O.A.T 30

UAEtc, M.O.A.T 30

UAEtc, M.O.A.T 30

ASTM D 5147ASTM D 4073

CGSB-37 GP 56MASTM D 5147

ASTM D 5147

ASTM D 5147UAEtc, M.O.A.T 30

DIN 52123

ASTM D 5147

UAEtc, M.O.A.T 27

ASTM D 4799

DS30

10 x 1

3.0

3.0

3.5

160

*700500

**4550

>700>500

300250

31,50025,000

DS30200

10 x 1

3.0

3.0

3.5

200

*950750

**4550

>950>750

350300

42,75037,500

DS40

10 x 1

3.0

3.0

3.5

180

*900700

**4550

>900>700

450350

40,50035,000

DS40200

10 x 1

3.0

3.0

3.5

200

*1000800

**4550

>1000>800

450400

45,00040,000

DS40250

10 x 1

3.0

3.0

3.5

250

*11501000

**4550

>1150>1000

500450

51,50050,000

DS50

10 x 1

3.0

3.0

3.5

250

*12001000

**4550

>1200>1000

500450

54,00050,000

Polymer Modified Asphalt

>150

15 - 30

No Cracking

No Flowing

No Leakage

<3.2%

L4I3

L4I3

No deterioration

Properties Typical Results

AWAZEL PY MEMBRANESPY30, PY40, PY50Oxidized, polyester carrier

Description: Oxidized bituminous membranes, reinforced with non-woven polyester mat. The polyester combines high tensile strength and an elongation above 40%.

Features:

- Excellent bond ability - Good resistance to fatigue and tear - Superior elongation - Durable and easy to apply - Remarkable resistance to aggressive attack of salt and chemicals

Functions: Used in a single or double layer as damp proofing for bathrooms and structural elements that is below ground or in two layers for tanking in basements. It also can be used for a wide range of waterproofing applications including roofs, reservoirs, tunnels etc.

Instructions for Applications: These membranes can be installed fully bonded or loose-laid by torch welding. The substrate should be cleaned and primed with AWAZEL PRIMER D41 and allowed to dry. Torching should be done by skilled labor and should be controlled so that only the PE film is melted and the asphalt coating is sufficiently softened to bond the membrane. All lap joints should be smoothed and sealed using a heated round-nosed trowel. The heat of the gas flame should be applied to the trowel. In loose-laid applica-tions, only the lap joints, areas around penetrations (pipe etc.), up stands and a 30cm wide stripe around the perimeter of the work should be fully bonded. Up stands and flashing should be installed using 1m wide pieces cut from the length of the roll. (The overlap joints should be 5 to 10cm at the side and 15cm at the end).

Coverage: 1.12m per layer for flat surfaces

Health and Safety: All safety measures should be observed during applica-tion. Fire extinguishers should be available at the site. Protective tools, such as gloves and goggles, should be worn by personnel during application.

Precautions: No special precautions are needed.


Packing: Produced in rolls of 1 x 10 and 1 x 8 meters; special lengths area available upon request. Rolls are palletized and shrink-wrapped.

Surfacing: Surfaced with a polyethylene (PE) film on both sides.

Storage and Material Handling: The rolls should always be stored vertically in shaded area. Normally, pallets should not be stacked one over the other. However, if a wooden board is used in between, two pallets may be stacked, one over the other.


TECHNICAL DATA

Properties

Roll Size, m

Unit Weight, kg/m2 (plain)

Carrier (Polyester) Weight, g/m2

Coating Asphalt Type Softening Point (RandB), 0C Penetration at 250C, 0.1 mm

Tensile Strength, N/5cm Longitudinal Transversal

Elongation at Break, % Longitudinal Transversal

Lap joint Strength, N/5cm Longitudinal Transversal

Tear Resistance, N Longitudinal Transversal

Load Strain Product Longitudinal Transversal

Cold Flexibilityat 00C – 50C

Heat Resistanceat 1350C

Resistance to Water pressure

Water Absorption, (BSP)

Test Method

UAEtc, M.O.A.T 30

UAEtc, M.O.A.T 30

UAEtc, M.O.A.T 30

ASTMD D 36

ASTMD D 5

DIN 52123

DIN 52123

DIN 52123

DIN 52123

DIN 52123

DIN 52123

DIN 52123

DIN 52123

ASTM D 5147

PY30

10 x 1

3.0

3.0

*550400

**4045

>550>400

250200

22,00018,000

PY40

10 x 1

3.0

3.0

*700500

**4045

>700>600

300250

28,00022,500

PY50

8 x 1

3.0

3.0

*800650

**4045

>800>650

350300

32,00029,250

Polymer Modified Asphalt

>150

15 - 30

No Cracking

No Flowing

No Leakage

<3.2%

Properties Typical Results

DELTA BITUMEN PRIMERSolvent Base

DELTA PRIMER is a premium quality solvent based primer designed to penetrate and seal porous surfaces to provide a firm base for bonding of bituminous materials.

Uses: DELTA PRIMER used as primer coat prior to the application of membrane. Also suitable to use as surface dressing to concrete, masonry, metal and smooth asphalt roofs.

Direction of Use:

- Surface must be dry, clean, free of oil, grease and other foreign matters. - After stirring can be applied by brush, roller or spray equipment as a thin coat. - Localized discolored patches should be coated.

Cleaning: Clean equipments and tools with diesel or kerosene.

Packing: DELTA PRIMER is available in 15ltr pails and 200kg drums.

Advantages:

- Improves the bond of bituminous materials. - Binder for dust particles - Excellent penetration. - Anti corrosive.

Coverage: The exact rate will depend upon the condition of substance. Approximate rate is 0.3 - 0.5 ltr/m2 (0.2 – 0.4kg/m2)

Standards: ASTM D-41

Precaution: Ensure that there is adequate ventilation in working place. Fires and naked fires should be kept at a distance. Wear protective mask, gloves and goggles during the application.

- In the event of inhalation remove person to fresh air and call for medical attention. - Contact with eyes – flush immediately and call for medical attention. - Contact with skin – remove with hand cleanser then clean with soap and water.

DELTA BITUMEN PRIMERSolvent Base

Technical and Physical Data

Note: We endeavour to ensure that any advice, recommendation or information we may give in product literature is accurate and correct. However, we have no control over the circumstances in which our product is used and it is therefore important that the end user satisfy himself by prior testing that the product is suitable for his specific application and that the actual conditions of use are suitable. Accordingly, no responsibility can be accepted, or any warranty given by ourselves, our representatives, agents or distributors, other than that the product as supplied by us will meet our written specification. Products are sold subject to our standard conditions of sale and each purchaser and end user should at all times ensure that he has consulted our latest product instructions and safety information.

Property / Test Test Method Units Value

Density @250C ASTMD D 70 kg/ltr 0.87 – 0.89

Viscosity @25oC Brookfield cps 70 - 150

Saybolt Furol Viscosity @ 25oC ASTM D 88 sec. 25 - 125

Flash point ASTM D 3143 oC 35(min)

Non-volatile ASTM D 402 % wt 45(min)

Volatile ASTM D 402 % wt 55(max)

Penetration of asphalt from distillation

ASTM D 5 - 20 - 50

Water Content ASTM D 95 - Nil

Coverage Rate - ltr/m2 0.3 - .05

Drying time to touch - hrs 3.5

Drying time through - hrs 24

DELTA RUBBERISED BITUMEN EMULSION

DELTA rubberized bitumen emulsion for waterproofing and protective coating applications is a reinforced, bitumen emulsion. It is supplied as a single com-ponent liquid, dark brown in color, which dries to form a black flexible coating.

DELTA is suitable for the treatment of concrete, asphalt, metal, roofing felt and other similar roofing surfaces whether flat, sloping or vertical. May be used as a damp- proof membrane and as a vapour barrier. It may also be used as a coating to protect below ground concrete. Once dry/cured, it forms a tough yet flexible barrier that is impervious to both water and vapour transmission.

Advantage:

- General waterproofing and damp proofing of concrete. - Asbestos cement sheets. - Roofing felts, wood. - Protection of steel work. - Pipes and metal. - Vapour Permeable allows substrate to breathe. - Reduced chloride penetration due to hard impermeable surfaces. - Simple and easy to use. No skilled labour required. - Single component, use as supplied. - Solvent free. - Cold applied, no heating required. - Non-slumping. - Easy application due to paintable.

Standard Compliance: DELTA RB complies with ASTM C309 concrete curing requirements when applied at a rate of 1 – 2 /m2 per litre.

Application Procedure:

Surface Preparation: All substrates must be sound clean, dry and smooth within reason, free from protrusions, voids honeycombs and high spots. Pres-ence of curing agents, paint and oil will impair adhesion.

Priming: Priming is not normally required on good quality, well prepared sub-strates.

Application: DELTA may be applied by brush, broom or squeegee. It is rec-ommended that one or two coats should be applied depending on the degree of protection required. Allow a minimum of 31/2 hours between coats.

DELTA RUBBERISED BITUMEN EMULSION

Where DELTA RB is required to take a screed, the second coat must be blend-ed with clean, dry sharp sand as soon as applied. The excess sand should be brushed off when coating has dried.

Packing and Storage: DELTA RB is supplied in 15 or 20 and 200 liter units. Store in shaded warehouses away from heat, humidity or moisture.Shelf life will be 12 months.

Typical Properties:

Cleaning: Tools and spillage may be cleaned using water or white spirit or paraffin.

Health and Safety: As with all chemical products, care should be taken to avoid contact with skin, eyes, mouth and foodstuffs. Treat splashes to eyes and skin immediately, by thorough washing with clean water. If ingested seek medical attention.

Chemical Resistance:

Specific Gravity at 25°C 0.99 - 1.01

Appearance Dark brown / Black at dry.

Recommended covering capacity 2 – 6 m²/L

Drying time at 25°C 2 - 4 hours

Rubber content DFC 10%

Potable water Excellent

10% Sodium Hydroxide Satisfactory

5% Sodium Sulphate Satisfactory

Moist heat (70% + 80% RH) Satisfactory

DELTA WATERPROOF BITUMEN EMULSION (Water Based)

Description: DELTA (WB) is a bitumen emulsion coating of brushing consist-ency which dries to give a firm, flexible and joint less waterproof and protec-tive membrane.

DELTA (WB) is suitable for the treatment of concrete, asbestos cement sheets, metal, roofing felt and other similar roofing surfaces whether flat, sloping or vertical. It can also be used in conjunction with a reinforcing fabric.

Advantage: General waterproofing and damp proofing of concrete, asbestos cement sheets, roofing felts, wood, protection of steelwork, pipes and metal. Vapour Permeable allows substrate to breathe. Reduced chloride penetration due to hard impermeable surfaces. Simple and easy to use, no skilled labour required. Single component, use as supplied. Solvent free. Cold applied, no heating required. Non-slumping. Easy application due to paintable.

Application Procedure:

Surface Preparation: Surfaces to which DELTA WB is to be applied must be clean and free of dirt, dust, rust or any other material which may impair adhe-sion. Where moss or lichen is present, remove sheets. Cut and reseal blisters in asphalt or roofing. Remove chippings other than those that form the surface of mineralized felt. Porous surfaces such as concrete and fiber reinforced ce-ment should be primed using.

DELTA WB diluted with clean water.

Old concrete and steel must be structurally sound prior to application.

Application: Apply by brush or roller. Two or more coats must be applied to ensure a durable finish. Second and subsequent coats should be applied at right angles to each other once previous coats have fully dried. DELTA WB may be applied to damp but not wet surfaces, dampen brushes before and occasionally during use to avoid clogging and ease application. During hot, dry weather application may be assisted by dampening the surfaces to be treated.

DELTA WATERPROOF BITUMEN EMULSION (Water Based)

Packing and Storage: DELTA WB is supplied in 15 or 20 and 200 liter units. Store in shaded warehouses away from heat, humidity or moisture. Shelf life will be 12 months.

Typical Properties:

Cleaning: Tools and spillage may be cleaned using water or white spirit or paraffin.

Health and Safety: As with all chemical products, care should be taken to avoid contact with skin, eyes, mouth and foodstuffs. Treat splashes to eyes and skin immediately, by thorough washing with clean water. If ingested seek medical attention.

Storage:

- Store in sealed conventional containers. - Protect from extreme weather conditions. - Stir well before use, if stored for a long time.

Specific Gravity at 25°C 0.99 - 1.01

Appearance Dark brown / Black at dry.

Recommended covering capacity 2 – 4 m²/L

Drying time at 25°C 2 - 4 hours

Flash Point N/A

Chemical Resistance: Water, aqueous groundwater salt solu-tions, mild detergents, acids and alkalis

DELTA COAT 245Polymer Modified Cementitious Waterproofing System

DELTA COAT 245 is a two component, acrylic polymer modified Cementations waterproofing coating. Special modified product HSR is available on request. DELTA COAT is based of a cement-modified mortar with Additives and liquid component. Mixed together on site. The product is easy to apply and is used as an effective protective coating on walls and roofs against waterborne salts, weather, chemicals atmospheric gases and carbonations. It is a non-shrink mortar and dries to form a flexible waterproof membrane.

- Basement and lift pits.- Waterproof lining for drinking water reservoirs and structures.- Sealine and coating bar holes to ensure water tightness.- For swimming pools.- To provide protection to concrete surfaces from carbonation and chloride attack.- Terrace, balconies and bathrooms- Pre batched component, just site mixing.- Easy application by brush or trowel.- Impermeable, increased frost and salt resistant.- Excellent damp proofing to porous and non-porous surfaces.

Colors White and Grey

Powder Density g/1 1.47

Liquid Density g/1 1.04

Mixed Density g/1 1.8

Grain Size 0-0.5mm

Adhesion to concrete 3 N/mm2

Adhesion N/mm2

ASTM D4541 28 days 1 - 2

DELTA COAT 245Polymer Modified Cementitious Waterproofing System

Coverage m2/kg 0.5-0.75

Thick coat/m2 1 to 1.5 kg

No.of coats recommended 2

Resisitance to tearing 160 kg/cm2

Flexibility of 1.5 film thick > 30%

Instruction for Use: The substrate must be perfectly sound, clean, and free from dust and friable matters. Damp the substrate with clean water.Metal sur-faces should be wire brushed to remove moss, mild dew, loose paint and rust. Mix the components A and B with slow speed drill so as to obtain a creamy coating which can be, applied by a brush. Or add a little pure water to make the mix brushable.

Application: Use a brush or a roller for application. Always damp the surface before coating. Apply the first coat of DELTA COAT with sufficient thickness to plug pores, cracks and holes @1 kg/m2. Apply 2nd and 3rd layers in the propertion on 0.5 to 1kg/m2. For high-pressure areas it is recommended to reinforce the first layer with a fiber mesh. In case of water reservoirs allow to cure for two days.

Packing: As 17.5 kg. (12.5kg powder and 5kg liquid)

Precaution - Health & Safety: As with all chemical products, caution should always be exercised. Protective clothing, such as gloves and goggles, should be worn. Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed, do not induce vomiting, but call for medical assistence immediately. Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure a product is stored as in-structed on the safety section of the labeling.

Technical Supports: DELTA provides on site technical assistance and guidence for use of our products. For further information consult DELTA technical ser-vices.


DELTA POLYSULPHIDE JOINT SEALANTGun Grade and Pouring Grade

DELTA DPS 555 is a two part chemically curing sealant that cures at ambient temperature to a medium modulus flexible, water resistant rubber. DELTA DPS 555 provides a durable, flexible seal in joints in masonry, metal, concrete, glass, ceramic and wood. It is ideally suited for sealings vertical, horizontal and sloping joints.

Application:

- Sealing and caulking concrete joints subject to structural movement. - Airport Runways and taxiways, - Pump station and parking areas. - Water and sewage treatment facilities. - Precast structure and retaining walls.

Features:

- High adhesion and dimensional stability. - Excellent recovery characteristics. - High durability and weathering resistance. - Wide range of service temperatures. - Suitable in contact with potable water.

Standards Compliance:

ASTM C 920 type M Grade NS class25 BS 4254TT-S-00227 E General compliance

Typical Properties: Appearance of Comp A: Off White PasteAppearance of Comp B: Black Paste

Colors Grey and White.Other colors available on request

Grade Gun

Min 2hrs

Pouring

Min 2hrsApplication life at 25%

U.V Resistance Good Good


Gun Pouring

Shore A Hardness 15 — 25 <25

Chemical Resistance to occasional spillage

Excellent Excellent

Cure Time @ 250C 7 days 7 days

Movement Accommodation % ±25 ±25

Joint Size: Joint size may vary from a minimum 5mm to maximum 30mm wid. Joints with cyclic movement should have a width of depth ratio 2:1 and should be designed so total movement does not exceeded 25% MAF.Sealant width should not exceed joint width, except joints subject to total im-mersion where joint profile should be 1:1.

Minimum sealant depth recommended:

- 5mm for metals, glass and other impervious surfaces. - 10mm for all porous surfaces. - 20mm for joints exposed to hydrostatic pressure. - 5mm below flush for joints exposed to traffic.

Instructions for Use:

Joint Preparation: The joint must be clean and dry and free from oil, loose particles, cement laitance corrosion, tar, grease, asphalt, mastic compounds, paint, waterproofing agents wax, release agents and other contaminant which may affect the adhesion. On porous substrates allow any residual solvent to evaporate prior to sealant application. Wipe non porous surfaces (glass, alumi-num etc) with lint free cloth and solvent.

Applying masking tape: Masking tape should be used to protect the face of the joint from primer and or sealant application. Tape should be removed as soon as possible after application of sealant.

Priming: After proper surface preparations if required, DELTA DPS Primer shall be applied to clean dry surface prior to installation of backer rod and bond breaking tape. Apply primer using a soft paint brush. For porous material, work the primer to ensure complete surface penetration, do not spread primer too thinly and do not apply excess primer. Primer should be allowed to become tack free prior to sealant application.


Backer-rod: To allow free movement of sealant with joint movement and to ensure the correct and uniform depth of sealant along whole length of the joint, Backer rod to be used. Backer rod makes it easier to completely fill the joint with sealant, controls the sealant depth, and reduces sealant wastage and support sealant during tooling.

Backer rod diameter shall be at least 20% larger but not greater than 33% of Joint width, wherever joint depth is insufficient to use backer rod a bond breaker, polythene tape or film to which sealant will not stick to be used to prevent adhesion to the third surface. Mixing: Combine the base and curing agent and use a slow speed electric mixer fitted with a suitable paddle to stir until a homogenous mix is obtained. Ensure that the mixing paddle is taken round the sides of the tin so that every particle of material is thoroughly mixed. A palette knife should be used to scrape round the inside of the tin to return any unmixed sealant to the mass of material.

Application: Application can be by pouring, gun or trowel according to the grade used. When using a bulk-loading gun, place over the centre hole of the filler plate; apply steady downward pressure whilst drawing the rod of the bulk-loading gun, this will result in the barrel being filled. Extrude the sealant firmly into the joint by maintaining an even pressure on the trigger of the gun. Ensure complete filling of the joint to avoid slumping. Clean the gun nozzle occasionally to avoid contamination.

Tooling: To obtain a smooth finish, tool the sealant with a spatula wet with diluted detergent. This breaks air bubbles and exposes any air pockets present whilst compressing the sealant and promoting adhesion to the joint sides.

Packaging and Storage: DELTA DPS 555 is supplied in Gun Grade and Pour-ing grade in 4 liters tins. It has a minimum shelf life of 12 months provided it is stored under cover, out of direct sunlight.

Other pack size available on request.


CoverageDELTA DPS 555 (length of joint in meters filled with 1 liter of material)

Width of joint mm

Depth of joint mm 10 15 20 25 30

10 10 6.7 5 4 3.33

15 4.45 3.33 2.67 2.23

20 2.5 2 1.67

25 1.6 1.33

Health and Safety Precautions: DELTA DPS 555 does not fall into the hazard classifications of current regulations. However, it should not be swallowed or allowed to be exposed to skin and eyes. Suitable protective gloves and goggles should be worn. Splashes on the skin should be removed with water. In case of contact with eyes rinse immediately with plenty of water and seek medi-cal advice. If swallowed seek medical attention immediately — do not induce vomiting.

For further information, refer to the Material Safety Data Sheet available for this product.

Technical Support: DOHA BAY provides a comprehensive technical support service to specifies, end-users and contractors and is able to offer on-site tech-nical assistance.

Important Note: DOHA BAY endeavors to ensure that the technical informa-tion contained herein is true, accurate and represents our best knowledge and experience. No warranty is given or implied, as DOHA BAY has no control over the conditions of use and the competence of any labor involved in the applica-tion which is beyond our control.

As all DOHA BAY technical data sheets are updated on regular basis, it is the customer’s responsibility to check that the product used is suitable for the in-tended application, and that the actual conditions of use are in accordance with those recommended.

- GeoTextile TF80 - P- GeoTextile TF100 - P

3 - GeoTextile

GEOTEXTILE TF - 80PPolypropylene Needle-punched Nonwoven Geotextile Technical Data Sheet

Product Code: TF - 80P

Property Unit Test Standard Value

Basis Weight g/m² EN ISO 9864/ ASTM D5261 80

Thickness @ 2 Kpa mm EN ISO 9863-1/ASTM D5199 1.0

UV Resistance @ 500 hr % ASTM D4355 70

Tensile Strength MD/CD kN/m EN ISO 10319/ ASTM D4595 5.0/5.0

Elongation MD/CD % EN ISO 10319/ ASTM D4595 60/60

Tensile Strength Grab kN ASTM D4632 0.18

Tear Strength N ASTM D4533 65

Static Puncture Resistance (CBR-test) kN EN ISO 12236/ ASTM D6241 800

Dynamic PerforationResistance (Cone Drop) mm EN ISO 13433 32

Characteristic OpeningSize O90 µm EN ISO 12956 120

Permittivity sec-1 ASTM D4491 5.5

Water Flow Normal toplane 50mm WH l/m²/s EN ISO 11058 135

GEOTEXTILE TF - 100PPolypropylene Needle-punched Nonwoven Geotextile Technical Data Sheet

Product Code: TF - 100P

Property Unit Test Standard Value

Basis Weight g/m² EN ISO 9864/ ASTM D5261 100

Thickness @ 2 Kpa mm EN ISO 9863-1/ASTM D5199 1.0

UV Resistance @ 500 hr % ASTM D4355 70

Tensile Strength MD/CD kN/m EN ISO 10319/ ASTM D4595 6.0/6.0

Elongation MD/CD % EN ISO 10319/ ASTM D4595 60/60

Tensile Strength Grab kN ASTM D4632 0.22

Tear Strength N ASTM D4533 80

Static Puncture Resistance (CBR-test) kN EN ISO 12236/ ASTM D6241 1000

Dynamic PerforationResistance (Cone Drop) mm EN ISO 13433 30

Pore size O90% microns EN ISO 12956 110

Permittivity sec-1 ASTM D4491 5.0

Water Flow Normal toplane 50mm WH l/m²/s EN ISO 11058 125

- Sheetrock

4 - Sheetrock

SHEETROCK® BRANDAll Purpose Joint Compound

SHEETROCK® Brand All Purpose Ready-Mix joint Compound contains vinyl binders and other ingredients that provide performance superior to that of or-dinary ready-mixed products. Blended to a creamy, smooth consistency, USG vinyl based formulations given excellent slip and bond and easy workability. They can be used directly from the container and require only minimal mixing, thinning and finishing. Joint finishing is fast, easy and smooth, reducing labor costs and improving appearance and quality of the job.

Application Guide:

- Embedding tape - 1st coat over metal beads, trims and fastener - 2nd and 3rd coat (finish) - Skim coating - Laminating - Texturing - Cracks in interior plaster or masonry which are subject to moisture

Advantages:

- Ready-mixed convenience and economy; Factory-mixed for high quality. Mixing and sanding time reduced substantially.

- Better slip, excellent bond: SHEETROCK®

All Purpose Ready-Mix Joint Compound features superior ease of handling, good crack-resistance, and excellent adhesion. Superior bonding properties are retained even under humid job conditions, which often weaken bonding of other components.

- Fewer droppings, less waste; Butter consistency of SHEETROCK® All Purpose Ready-Mix Joint Compound minimizes dropping and reduces risk of staining woodwork. Costly job cleanup is virtually eliminated. In the container, compound can be kept in wet-mix stage for months later.

- Low shrinkage for finer finish; Factory controlled shrinkage results in finer finished work without the extra labor.

- Fewer decoration problems; Test show that SHEETROCK®

All Purpose Ready-Mix Joint Compound is specially resistance to cracking along tape edge smoothness of finishing joints and lack of any chemical reaction with quality paints or wallpaper simplifies decoration.

SHEETROCK® BRANDAll Purpose Joint Compound

Preparation: Position and apply Gypsum panels in accordance with manu-facturer’s recommendations. In cold weather and during gypsum panel joint finishing, temperatures within the building shall be maintained at a minimum 13oC. Adequate ventilation shall be provided to carry off excess moisture. Mix contents lightly without adding water. Use directly from container for covering fasteners and corner beads. For taping and finishing joints (especially for use in mechanical tools), thin as necessary. Add water in 250ml increment to avoid over-thinning. Remix lightly and test applies after each water addition.

Application: Cover joint with a thin layer of compound and embed tape, leav-ing about 1mm of compound under feathered edge. Let dry, sand lightly. Apply second coat, feathering approximately 5cm beyond first coat. Sand lightly as required when dry. Finish fasteners heads, corner beads and inside corners as required with at least three coats of SHEETROCK® All Purpose Ready-Mix Joint Compound, featured out onto panel faces and finished to a smooth surface. It is recommended that all joints, fasteners and beads be sanded before decorat-ing. Remove any sanding dust from surface. If smoothing and dry sanding it is recommended to 150-grit sandpaper or 220-grit abrasive mesh cloth.

Decorating: For priming and decorating with paint, texture or wall covering, fellow manufacturer’s directions for material used

Product Data:

Material: Vinyl-type formulation

Types: Hand or mechanical applications.

Freezing Sensitivity: Protect from freezing.

Coverage: Approximately 67.4kg/100m2 of gypsum panel.

Storage: Shelf life up to 12 months under good storageconditions. Store compound in a protected place, be-cause extreme heat or cold accelerates again. Check production date codes periodically.Rotate stock on first-in, first-out basis.

Packaging: 28kg plastic pails.

Drying Time: Overnight (depending on temperature and humidity)

Temperature: Min. 130C (within the building for joint finishing)

Color: White

Density: 1.5kg/l

BECON Construction MaterialsP.O.Box No. : 37312

Doha - Qatar

Tel: +974 44552022 +974 44552033Fax: +974 44552044

Mobile: +974-33061439

Email : [email protected]

www.becon.com.qa

rwebsite: brouchure .pdf · doha bay construction materials w.l.l. for construction chemicals...

Documents