rs9113 usb half mini card -...
TRANSCRIPT
Redpine Signals, Inc. Proprietary and Confidential
RS9113 USB Half Mini Card
Datasheet
Version 1.2
August 2017
Redpine Signals, Inc. 2107 N. First Street, #680
San Jose, CA95131. Tel: (408) 748-3385 Fax: (408) 705-2019
Email: [email protected]
Website: www.redpinesignals.com
Redpine Signals, Inc. Proprietary and Confidential Page 2
RS9113 USB Half Mini Card Datasheet Version 1.2
Overview: The RS9113 USB Half Mini Card is based on Redpine Signals’ RS9113 ultra-low-power Convergence SoC. It offers dual-band 1x1 802.11n, dual-mode Bluetooth 4.0 and ZigBee 802.15.4 in a single device over USB in a Mini PCIe Card form factor. It is a high performance, long range and ultra-low power device and includes a multi-threaded MAC processor called ThreadArch®, baseband digital signal processor, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch, dual-band antenna, U.FL connector and Quad-SPI flash. The software architecture for the USB Half Mini Card, n-Link®, realizes a host-based architecture where the necessary MAC and PHY layers are implemented in the device to support high-performance, long range WLAN, Bluetooth and ZigBee applications in a 32-bit host processor over USB interface.
Applications:
Smartphones, Tablets and e-Readers
VoWi-Fi phones
Smart meters and in-home displays
Industrial automation and telemetry
MP3 music and MP4 video players
Medical devices
Industrial monitoring and control
Home and building automation
Wireless Headset
Features:
WLAN: Compliant to single-spatial steam IEEE 802.11
a/b/g/n with dual band (2.4 and 5 GHz) support.
Support for 20MHz and 40MHz channel bandwidths.
Transmit power up to +18dBm with integrated PA.
Receive sensitivity of -97dBm.
Bluetooth: Compliant to dual-mode Bluetooth 4.0
Transmit power up to 15dBm (class-1) with integrated PA.
Receive sensitivity of -94 dBm.
ZigBee: Compliant to IEEE 802.15.4
Transmit power up to 15dBm with integrated PA. Receive sensitivity of -102 dBm.
ZigBee Pro stack embedded.
n-Link®: Seamless integration with 32-bit processors
over USB. Host Drivers for Linux, Wind River Linux,
Android and Windows1
General: FCC, IC, ETSI/CE and TELEC Certified
U.FL connector for external antenna connection is selectable.
Single supply of 3.0 to 3.6 V
Operating temperature range: -40oC to +85oC
1Drivers for Linux,Wind River Linux and Android available now. Contact Redpine Signals Sales
([email protected]) for availability of drivers for Windows.
Redpine Signals, Inc. Proprietary and Confidential Page 3
RS9113 USB Half Mini Card Datasheet Version 1.2
About this Document This document describes the RS9113 USB Half Mini Card’s specifications. The document covers the hardware and software features, package descriptions, pin descriptions, interface specifications, electrical characteristics, performance specifications, reliability and certification information and ordering information.
Disclaimer: The information in this document pertains to information related to Redpine Signals, Inc. products. This information is provided as a service to our customers, and may be used for information purposes only. Redpine assumes no liabilities or responsibilities for errors or omissions in this document. This document may be changed at any time at Redpine’s sole discretion without any prior notice to anyone. Redpine is not committed to updating this document in the future.
Copyright © 2017 Redpine Signals, Inc. All rights reserved.
Redpine Signals, Inc. Proprietary and Confidential Page 4
RS9113 USB Half Mini Card Datasheet Version 1.2
Table of Contents
1 Overview .................................................................................................................. 6 1.1 Block Diagram............................................................................................................... 6 1.2 Product Naming and Variants ....................................................................................... 6
2 Features ................................................................................................................... 8
3 Package Description ............................................................................................... 13 3.1 Mechanical Characteristics ......................................................................................... 13 3.2 Half Mini Card Dimensions ......................................................................................... 13
4 Pinout and Pin Description ..................................................................................... 14 4.1 Pinout of the RS9113 USB Half Mini Card ................................................................... 14 4.2 Pin Description ........................................................................................................... 15
5 Specifications ......................................................................................................... 17 5.1 Absolute Maximum Ratings ........................................................................................ 17 5.2 Recommended Operating Conditions ......................................................................... 17 5.3 Reliability Qualification .............................................................................................. 17 5.4 DC Characteristics – Digital I/O Signals ....................................................................... 19 5.5 AC Characteristics ....................................................................................................... 19
5.5.1 USB Interface ................................................................................................................... 19 5.5.1.1 Timing Characteristics .................................................................................................. 19 5.5.1.2 Electrical Characteristics............................................................................................... 19 5.5.1.3 Voltage Thresholds ...................................................................................................... 20
5.5.2 Reset Timing .................................................................................................................... 20 5.6 Performance Specifications ........................................................................................ 20
5.6.1 WLAN Performance Specifications ................................................................................... 20 5.6.1.1 WLAN 2.4 GHz Receiver Characteristics ........................................................................ 20 5.6.1.2 WLAN 2.4 GHz Transmitter Characteristics ................................................................... 22 5.6.1.3 WLAN 5 GHz Receiver Characteristics ........................................................................... 23 5.6.1.4 WLAN 5 GHz Transmitter Characteristics ...................................................................... 24
5.6.2 Bluetooth Performance Specifications .............................................................................. 25 5.6.2.1 Bluetooth Receiver Characteristics ............................................................................... 25 5.6.2.2 Bluetooth Transmitter Characteristics .......................................................................... 26
5.6.3 ZigBee Performance Specifications ................................................................................... 27 5.7 Regulatory Specifications ........................................................................................... 27 5.8 Antenna Specifications ............................................................................................... 28
5.8.1 Return Loss Characteristic of the Antenna ........................................................................ 28 5.8.2 Module Reference Orientation ......................................................................................... 29 5.8.3 5.82D Gain Plots .............................................................................................................. 29
5.8.3.1 XY at 2.43 GHz ............................................................................................................. 29 5.8.3.2 YZ at 2.43 GHz .............................................................................................................. 30 5.8.3.3 ZX at 2.43 GHz.............................................................................................................. 30 5.8.3.4 XY at 5.5 GHz ............................................................................................................... 31 5.8.3.5 YZ at 5.5 GHz ................................................................................................................ 31 5.8.3.6 ZX at 5.5 GHz ............................................................................................................... 32
5.8.4 Antenna Parameters ........................................................................................................ 32
6 Software Architecture ............................................................................................ 33 6.1 n-Link® Software Architecture .................................................................................... 33
6.1.1 Operating System Support ............................................................................................... 34
Redpine Signals, Inc. Proprietary and Confidential Page 5
RS9113 USB Half Mini Card Datasheet Version 1.2
7 Module Marking and Ordering Information ........................................................... 35 7.1 Module Marking Information ..................................................................................... 35 7.2 Ordering Information ................................................................................................. 36 7.3 Collateral .................................................................................................................... 36 7.4 Packing Information ................................................................................................... 36 7.5 Contact Information ................................................................................................... 36
Table of Figures Figure 1: Block Diagram of RS9113 USB Half Mini Card ............................................................................ 6 Figure 2: RS9113 USB Half Mini Card Naming Convention ........................................................................ 7 Figure 3: Package Dimensions ................................................................................................................ 13 Figure 4: Reset Timing ............................................................................................................................ 20 Figure 5: Return Loss Characteristic of the Antenna ............................................................................... 28 Figure 6: Module Reference Orientation ................................................................................................ 29 Figure 7: 2D Gain Plot for XY at 2.43 GHz ............................................................................................... 29 Figure 8: 2D Gain Plot for YZ at 2.43 GHz................................................................................................ 30 Figure 9: 2D Gain Plot for ZX at 2.43 GHz ............................................................................................... 30 Figure 10: 2D Gain Plot for XY at 5.5 GHz ............................................................................................... 31 Figure 11: 2D Gain Plot for YZ at 5.5 GHz................................................................................................ 31 Figure 12: 2D Gain Plot for ZX at 5.5 GHz ............................................................................................... 32 Figure 13: n-Link®Software Architecture ................................................................................................ 33 Figure 14: Module Marking Information ................................................................................................ 35 Figure 15: Mechanical Details of Tray..................................................................................................... 36
Table of Tables Table 1: RS9113 USB Half Mini Card Features ........................................................................................ 12 Table 2: Mechanical Dimensions ............................................................................................................ 13 Table 4: Pin Descriptions ........................................................................................................................ 16 Table 5: Absolute Maximum Ratings ...................................................................................................... 17 Table 6: Recommended Operating Conditions ....................................................................................... 17 Table 7: HTOL Based Stress Testing ........................................................................................................ 18 Table 8: Input/Output DC Characteristics ............................................................................................... 19 Table 9: Timing Characteristics for USB Interface ................................................................................... 19 Table 10: Electrical Characteristics for USB Interface ............................................................................. 20 Table 11: Input/Output DC Characteristics ............................................................................................. 20 Table 12: WLAN 2.4 GHz Receiver Characteristics .................................................................................. 22 Table 13: WLAN 2.4 GHz Transmitter Characteristics ............................................................................. 23 Table 14: WLAN 5 GHz Receiver Characteristics ..................................................................................... 24 Table 15: WLAN 5 GHz Transmitter Characteristics ................................................................................ 24 Table 16: Bluetooth Receiver Characteristics ......................................................................................... 26 Table 18: ZigBee Performance Specifications ......................................................................................... 27 Table 19: Regulatory Certifications ........................................................................................................ 27 Table 20: Antenna Parameters ............................................................................................................... 32 Table 21: Module Marking Information ................................................................................................. 35
Redpine Signals, Inc. Proprietary and Confidential Page 6
RS9113 USB Half Mini Card Datasheet Version 1.2
1 Overview
The RS9113 USB Half Mini Cards are multi-wireless Combo devices based on Redpine Signals’ RS9113 ultra-low-power Convergence SoC.
They offer dual-band 1x1 802.11n, dual-mode Bluetooth 4.0 and ZigBee 802.15.4 in a single device over USB in a Mini PCIe Card form factor. They are high-performance devices, which realize zero-host architecture. The necessary MAC and PHY layers are implemented in the device to support WLAN, Bluetooth and ZigBee applications and they interface with 32-bit host processors over USB interface.
They include a multi-threaded MAC processor called ThreadArch®, baseband digital signal processor, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch, dual-band antenna, U.FL connector and Quad-SPI flash.
1.1 Block Diagram
The following figure is the block diagram for the RS9113 USB Half Mini Card.
Figure 1: Block Diagram of RS9113 USB Half Mini Card
1.2 Product Naming and Variants
The figure below shows the naming convention for the USB Half Mini Card’s variants.
Redpine Signals, Inc. Proprietary and Confidential Page 7
RS9113 USB Half Mini Card Datasheet Version 1.2
Figure 2: RS9113 USB Half Mini Card Naming Convention
NOTE:
1) The devices and the accompanying software/firmware support a maximum of two wireless protocols simultaneously.
For the full list of available variants, please see the section on Ordering Information.
RS9113 - N B Z - D 3 N
N
B
Z
= Wi-Fi
= Bluetooth
= ZigBee
Base Module Family
Redpine Signals, Inc. Proprietary and Confidential Page 8
RS9113 USB Half Mini Card Datasheet Version 1.2
2 Features
The table below lists the features supported by the RS9113 USB Half Mini Card.
S.No. Feature Description
1. Wireless Protocols IEEE 802.11a, 802.11b, 802.11g, 802.11n
Bluetooth 4.0 (2.1+EDR, LE)
ZigBee 802.15.4
2. Operational Modes Supported2 Wi-Fi Access Point with support for up to 32 clients
Wi-Fi Client
Wi-Fi Access Point + Client
Wi-Fi Direct™
Wi-Fi Client + Bluetooth Classic (EDR v2.1)
Wi-Fi Client + Bluetooth Low Energy
Wi-Fi Client + ZigBee End Device
ZigBee Router3
ZigBee Coordinator3
3. WLAN Bandwidth 20 and 40 MHz
4. WLAN Data Rates 802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: MCS0 to MCS7 with and without Short GI
5. WLAN Operating Frequency Range
2412 MHz – 2484 MHz
4910 MHz – 5825 MHz
6. WLAN Modulation OFDM with BPSK, QPSK, 16-QAM, and 64-QAM
802.11b with CCK and DSSS
7. WLAN Transmit Power 18 dBm
8. WLAN Receive Sensitivity -97 dBm
9. Bluetooth Data Rates 1, 2, 3 Mbps
10. Bluetooth Operating Frequency Range
2402 MHz - 2480 MHz
2For other co-existence modes not listed here, contact Redpine Signals Sales ([email protected])
for custom offerings. 3Supported in future software releases.
Redpine Signals, Inc. Proprietary and Confidential Page 9
RS9113 USB Half Mini Card Datasheet Version 1.2
S.No. Feature Description
11. Bluetooth Channel Spacing BR, EDR – 1 MHz
LE – 2 MHz
12. Bluetooth Modulation GFSK, DQPSK, 8DPSK
13. Bluetooth Transmit Power 15 dBm (Class-1)
14. Bluetooth Receive Sensitivity -94 dBm
15. ZigBee Data Rate 250 kbps
16. ZigBee Operating Frequency Range
2405 MHz - 2480 MHz
17. ZigBee Modulation DSSS
18. ZigBee Transmit Power 15 dBm
19. ZigBee Receive Sensitivity -102 dBm
20. Deep Sleep Current Consumption
< 10 µA in disconnected state
< 30 µA in connected state
21. Host Interfaces USB 2.0
22. USB Host Interface Supports 480 Mbps High Speed (HS) mode and 12 Mbps Full Speed (FS) modes.
23. Software Architecture Architecture for Zero Host Load for Data path. Refer to the Software Architecture section for more details.
24. Wireless Security Features WPA/WPA2 Personal
WPA/WPA2 Enterprise Security
WPS
25. Advanced Security Features4 PUF Based Security
AES 128/256-bit
RSA
SHA, SHA256
ECDH
26. Application throughputs5 Upton 90 Mbps UDP
4These features are not part of the standard firmware. Contact Redpine Signals Sales
([email protected]) for details.
Redpine Signals, Inc. Proprietary and Confidential Page 10
RS9113 USB Half Mini Card Datasheet Version 1.2
S.No. Feature Description
Upton 70 Mbps TCP
27. Operating Temperature Range -40oC to +85oC
28. Supply Voltages and Options Single 3.0 to 3.6V Supply
29. WLAN Features Dynamic selection of data rate depending on the channel statistics.
Hardware accelerators for WEP 64/128-bit, TKIP, AES and WPS
Support for WMM
Support for AMPDU Aggregation/De-aggregation and AMSDU De-aggregation
Support for IEEE 802.11d/e/I, 802.11j6, 802.11w/k/v/r/h
6
30. Bluetooth Features Supports Classic mode piconet with seven active slaves7.
Supports Low Energy mode with seven active slaves8.
Supports scatternet with two slave roles or one master role and one slave role while being visible9.
Proprietary Mode to support 15 active slaves by using the “reserved” bit6.
Bluetooth security features: Authentication, Pairing and Encryption.
Supports low power connection states such as hold, sniff and park modes with selectable sniff intervals10.
Adaptive Frequency Hopping (AFH), Interlaced scanning, Quality of Service, Channel Quality Driven Data Rate6.
Channel assessment algorithm provides fast and accurate determination of occupied channels for use in adaptive frequency hopping mode6.
Proprietary FEC for DQPSK and 8-PSK modes.
Provides finer granularity of range vs. throughput control.
31. Bluetooth Profiles/Protocols All profiles are to be implemented in the Host.
5The throughputs mentioned here have been recorded in an ideal environment over USB. Throughputs observed in other environments might differ based on the host interface speeds (e.g., SPI clock frequency, UART Baud Rate, etc.), wireless medium, physical obstacles, distance, etc. 6Supported in future software releases. 7Current software releases support one slave. 8Current software releases support three slaves.
9Supported in future software releases.
10Hold and Park supported in future software releases.
Redpine Signals, Inc. Proprietary and Confidential Page 11
RS9113 USB Half Mini Card Datasheet Version 1.2
S.No. Feature Description
32. ZigBee Features MAC:
Supported modes: ZigBee Coordinator, Router11
, End device.
PHY features: Beacon12
, Non-Beacon, CCM Security, Promiscuous mode.
Power saving using End Device Sleep, network periodic sleep.
Supports CCM* Security levels 1-7.
Supports Active scan, channel selection, Association and Disassociation, Orphan scanning, and coordinator realignment.
Network Layer:
Network Discovery
Energy Detection Scan
Network Formation
Permit Joining
Network Join
Network Rejoin
Stochastic Addressing
Network Leave
Network Reset
Routing (Symmetric)
Address Conflict
PANID Conflict
Network Status Updates
Link Status Commands
Data Transmission (Unicast and Broadcast)
NIB Management
Many-to-one and source routing
Multicast relaying and route discovery
APS Layer:
APSDE Data primitives
APSME Group Services
APSME Binding Services
APSME Fragmentation Service
11
Coordinator and Router modes supported in future software releases. 12
Supported in future software releases.
Redpine Signals, Inc. Proprietary and Confidential Page 12
RS9113 USB Half Mini Card Datasheet Version 1.2
S.No. Feature Description
Reliable Transport
Duplicate Rejection
APS Layer Security
ZDO/ZDP Layer:
Device Discovery
Service Discovery
Security Manager
Node Manager
Network Manager
Binding Manager
Group Manager
Startup Attributes Set
33. Power Save Modes13 Dynamic Clock Gating
Low Power (LP) Mode – Modem and RF Transceiver Powered off. Host Interface is active. Supported with all host interfaces.
34. Miscellaneous Features Automatic Firmware Checksum validation and upgrade at power-up
Table 1: RS9113 USB Half Mini Card Features
13
Refer to Technical Reference Manual for more details on how to use these modes. Refer to the GPIO section of the Pin Description table to understand the signal requirements for these modes.
Redpine Signals, Inc. Proprietary and Confidential Page 13
RS9113 USB Half Mini Card Datasheet Version 1.2
3 Package Description
3.1 Mechanical Characteristics
Parameter Value (L X W X H) Units
Half Mini Card Dimensions 30 x 26.8 x 5.3514 mm
Tolerance ±0.1 mm
Table 2: Mechanical Dimensions
3.2 Half Mini Card Dimensions
Figure 3: Package Dimensions
14
The Height of the Half Mini Card includes the height of the components on the top and bottom and also the PCB thickness
Redpine Signals, Inc. Proprietary and Confidential Page 14
RS9113 USB Half Mini Card Datasheet Version 1.2
4 Pinout and Pin Description
4.1 Pinout of the RS9113 USB Half Mini Card
Pin No. Pin Name Pin No. Pin Name
Top Side Bottom Side
1 WAKE_N 2 VDD_33
3 RESERVED 4 GND
5 RESERVED 6 VDD_15
7 CLKREQ# 8 RESERVED
9 GND 10 RESERVED
11 REFCLK_P 12 RESERVED
13 REFCLK_N 14 RESERVED
15 GND 16 RESERVED
Mechanical Key
17 RESERVED 18 GND
19 RESERVED 20 RESERVED
21 GND 22 PERST_N
23 PERn0 24 AUX_VDD_33
25 PERp0 26 GND
27 GND 28 VDD_15
29 GND 30 SMB_CLK
31 PETn0 32 SMB_DATA
33 PETp0 34 GND
35 GND 36 USB_DN
37 RESERVED 38 USB_DP
39 RESERVED 40 GND
41 RESERVED 42 LED_WWAN_N
43 RESERVED 44 LED_WLAN_N
45 RESERVED 46 LED_WPAN_N
Redpine Signals, Inc. Proprietary and Confidential Page 15
RS9113 USB Half Mini Card Datasheet Version 1.2
Pin No. Pin Name Pin No. Pin Name
Top Side Bottom Side
47 RESERVED 48 VDD_15
49 RESERVED 50 GND
51 RESERVED 52 VDD_33
Table 3: Pinout of the USB Half Mini Card
4.2 Pin Description
This section describes the pins of the RS9113 USB Half Mini Card.
S.No. Pin Name Pin No. Direction Description
Control Interface
1. PERST_N 22 Input Active Low Reset signal.
USB Interface
2. USB_DN 36 Inout Negative Data Channel for USB.
3. USB_DP 38 Inout Positive Data Channel for USB.
Power and Ground Interface
4. VDD_33 2, 52 Input 3.3V Power Supply
5. AUX_VDD_33 24 Input 3.3V Power Supply
6. GND 4, 9, 15, 18, 21, 26, 27, 29, 34, 35, 40, 50
Ground Common Ground
Miscellaneous
7. WAKE_N 1 Output This signal is presently unused and connected to a pull-up resistor.
8. VDD_15 6, 28, 48 Input This signal is presently unused and left unconnected.
9. CLKREQ_N 7 Output This signal is presently unused and connected to a pull-up resistor.
10. REFCLK_P 11 Input This signal is presently unused and left unconnected.
Redpine Signals, Inc. Proprietary and Confidential Page 16
RS9113 USB Half Mini Card Datasheet Version 1.2
S.No. Pin Name Pin No. Direction Description
11. REFCLK_N 13 Input This signal is presently unused and left unconnected.
12. PERn0 23 Input This signal is presently unused and left unconnected.
13. PERp0 25 Input This signal is presently unused and left unconnected.
14. PETn0 31 Output This signal is presently unused and left unconnected.
15. PETp0 33 Output This signal is presently unused and left unconnected.
16. SMB_CLK 30 Input This signal is presently unused and left unconnected.
17. SMB_DATA 32 Inout This signal is presently unused and left unconnected.
18. LED_WWAN_N 42 Output This signal is presently unused and left unconnected.
19. LED_WLAN_N 44 Output This signal is presently unused and left unconnected.
20. LED_WPAN_N 46 Output This signal is presently unused and left unconnected.
21. RESERVED 3, 5, 8, 10, 12, 14, 16, 17, 19, 20, 37, 39, 41, 43, 45, 47, 49, 51
Inout Reserved. Leave unconnected.
Table 4: Pin Descriptions
Redpine Signals, Inc. Proprietary and Confidential Page 17
RS9113 USB Half Mini Card Datasheet Version 1.2
5 Specifications
5.1 Absolute Maximum Ratings
Absolute maximum ratings in the table given below are the values beyond which the device could be damaged. Functional operation at these conditions or beyond these conditions is not guaranteed.
Parameter Symbol Value Units
Input supply voltages VDD_33, AUX_VDD_33
3.6 V
Storage temperature Tstore -65 to 150
C
Operating temperature range Top -40 to 85
C
Electrostatic discharge tolerance (HBM) ESDHBM 2000 V
Electrostatic discharge tolerance (CDM) ESDCDM 500 V
Electrostatic discharge tolerance (MM) ESDMM 60 V
Maximum Current consumption in TX mode Imax 500 mA
Table 5: Absolute Maximum Ratings
5.2 Recommended Operating Conditions
Parameter Symbol Min. Typ. Max. Units
Input supply voltages VDD_33, AUX_VDD_33
3.0 3.3 3.6 V
Ambient Temperature Ta -40 25 85 oC
Table 6: Recommended Operating Conditions
5.3 Reliability Qualification
The USB Half Mini Cards have been stress-tested for High Temperature Operating Life as per the JEDEC standard JESD22-A108D. The following are the details of the tests.
Parameters Values/Details
Ambient Temperature 110oC
Junction Temperature 125oC
Supply Voltage 3.6V
Redpine Signals, Inc. Proprietary and Confidential Page 18
RS9113 USB Half Mini Card Datasheet Version 1.2
Parameters Values/Details
Operational mode Regular Ping with no power save modes activated.
Stress Duration 1000 hours
Number of Cards Tested 3 lots of 80 Cards each
Intervals at which Cards were removed from Temperature chamber for testing
168, 360, 720 and 1000 hours
Duration of the Tests (duration for which Cards were kept outside the chamber)
12 to 13 hours
Testing performed at each interval 1) Receive Sensitivity in Channels 1 and 11 for 1 Mbps, 6 Mbps and 54 Mbps data rates
2) Transmit power level and EVM in Channels 1 and 11 for 1 Mbps, 6 Mbps and 54 Mbps data rates
3) Peak current consumption in Transmit and Receive modes
Number of failed Cards Zero
Table 7: HTOL Based Stress Testing
The stress testing as per the JEDEC JESD22-A108D standard enables us to predict the operating life of the Cards from the acceleration factor calculated using the Arrhenius equation as per JEDEC JEP122G. The Arrhenius equation is as follows:
AT = λT1/λT2= exp[(-Eaa/k)(1/T1 – 1/T2)]
where15
AT = Acceleration Factor
Eaa = Appaprent activation energy (eV). 0.75eV is a conservative industry standard
k = Boltzmann’s constant (8.62 x 10-5 eV/K)
T1 = Temperature at use, in Kelvin
T2 = Temperature at stress, in Kelvin
Using the data from the HTOL Based Stress Testing and assuming a junction temperature of 55oC for a use case scenario, we can safely assume an operating life of >9 years. The junction temperature for the Card’s ICs is usually 15 to 20oC more than the ambient temperature.
15
Refer to the JEDEC JEP122G standard for more details on each parameter of the equation
Redpine Signals, Inc. Proprietary and Confidential Page 19
RS9113 USB Half Mini Card Datasheet Version 1.2
5.4 DC Characteristics – Digital I/O Signals
Parameter Min. Typ. Max. Units
Input high voltage 2 - 3.6 V
Input low voltage -0.3 - 0.8 V
Output low voltage - - 0.4 V
Output high voltage 2.4 - - V
Input leakage current (at 3.3V or 0V) - - ±10 µA
Tristate output leakage current (at 3.3V or 0V - - ±10 µA
Table 8: Input/Output DC Characteristics
5.5 AC Characteristics
5.5.1 USB Interface
5.5.1.1 Timing Characteristics
Parameter Conditions Min. Typ. Max. Units
trise 1.5 Mbps
12 Mbps
480 Mbps
75
4
0.5
-
-
-
300
20
-
ns
tfall 1.5 Mbps
12 Mbps
480 Mbps
75
4
0.5
-
-
-
300
20
-
ns
Jitter 1.5 Mbps
12 Mbps
480 Mbps
-
-
-
-
-
-
10
1
0.2
ns
Table 9: Timing Characteristics for USB Interface
5.5.1.2 Electrical Characteristics
Parameter Conditions Min. Typ. Max. Units
Vcm DC (DC level measured at receiver connector)
HS Mode
LS/FS Mode
-0.05
0.8
-
-
0.5
2.5
V
Crossover Voltages LS Mode
FS Mode
1.3
1.3
-
-
2
2
V
Power supply ripple noise < 160 MHz -50 - 50 mV
Redpine Signals, Inc. Proprietary and Confidential Page 20
RS9113 USB Half Mini Card Datasheet Version 1.2
Parameter Conditions Min. Typ. Max. Units
(Analog 3.3V)
Table 10: Electrical Characteristics for USB Interface
5.5.1.3 Voltage Thresholds
Parameter Min. Typ. Max. Units
A-Device Session Valid 0.8 1.4 2.0 V
B-Device Session Valid 0.8 1.4 4.0 V
B-Device Session End 0.2 0.45 0.8 V
Table 11: Input/Output DC Characteristics
5.5.2 Reset Timing
The figure below shows the requirement for the Reset assertion time during power up and during operation.
Figure 4: Reset Timing
5.6 Performance Specifications
5.6.1 WLAN Performance Specifications
All measurements are at antenna (cable loss is compensated).
5.6.1.1 WLAN 2.4 GHz Receiver Characteristics
Parameter Condition Min. Typ. Max. Units
Sensitivity for 20MHz Bandwidth
16
1 Mbps DSSS -95.5 dBm
2 Mbps DSSS -90.5 dBm
16
All Sensitivity numbers are at < 10% PER limit. Packet sizes are 1024 bytes for 802.11 b/g data rates and 4096 bytes for 802.11n data rates.
Redpine Signals, Inc. Proprietary and Confidential Page 21
RS9113 USB Half Mini Card Datasheet Version 1.2
Parameter Condition Min. Typ. Max. Units
5.5 Mbps CCK -88.0 dBm
11 Mbps CCK -86.5 dBm
6 Mbps OFDM -91.5 dBm
9 Mbps OFDM -90.0 dBm
12 Mbps OFDM -89.0 dBm
18 Mbps OFDM -87.0 dBm
24 Mbps OFDM -84.0 dBm
36 Mbps OFDM -80.5 dBm
48 Mbps OFDM -76.5 dBm
54 Mbps OFDM -74.5 dBm
MCS0 Mixed Mode -90.0 dBm
MCS1 Mixed Mode -88.0 dBm
MCS2 Mixed Mode -85.5 dBm
MCS3 Mixed Mode -83.0 dBm
MCS4 Mixed Mode -79.5 dBm
MCS5 Mixed Mode -75.0 dBm
MCS6 Mixed Mode -73.0 dBm
MCS7 Mixed Mode -71.5 dBm
Sensitivity for 40MHz Bandwidth
MCS0 Mixed Mode -86.5 dBm
MCS7 Mixed Mode -68.0 dBm
Maximum Input Level for PER below 10%
1 Mbps DSSS -4 dBm
11 Mbps CCK -4 dBm
54 Mbps OFDM -16 dBm
MCS0 Mixed Mode -15 dBm
Adjacent Channel Rejection
17
1 Mbps DSSS 35 dB
11 Mbps CCK 32 dB
17
Sensitivity level +3 dBm is used.
Redpine Signals, Inc. Proprietary and Confidential Page 22
RS9113 USB Half Mini Card Datasheet Version 1.2
Parameter Condition Min. Typ. Max. Units
6 Mbps OFDM 32 dB
54 Mbps OFDM 18 dB
PER Floor 0.1 %
RSSI Accuracy ±1 ±3 dB
Table 12: WLAN 2.4 GHz Receiver Characteristics
5.6.1.2 WLAN 2.4 GHz Transmitter Characteristics18
Parameter Condition Min. Typ. Max. Units
Transmit Power for 20MHz Bandwidth, compliant with IEEE mask and EVM
1 Mbps DSSS 18 dBm
2 Mbps DSSS 18 dBm
5.5 Mbps CCK 18 dBm
11 Mbps CCK 18 dBm
6 Mbps OFDM 17 dBm
9 Mbps OFDM 17 dBm
12 Mbps OFDM 17 dBm
18 Mbps OFDM 17 dBm
24 Mbps OFDM 17 dBm
36 Mbps OFDM 17 dBm
48 Mbps OFDM 16 dBm
54 Mbps OFDM 15 dBm
MCS0 Mixed Mode 17 dBm
MCS1 Mixed Mode 17 dBm
MCS2 Mixed Mode 17 dBm
MCS3 Mixed Mode 17 dBm
MCS4 Mixed Mode 17 dBm
MCS5 Mixed Mode 16 dBm
18
For channels 1 and 11 in the 2.4GHz band, the transmit power is reduced from the values indicated in this table in order to meet ISM Band Edge FCC limits.
Redpine Signals, Inc. Proprietary and Confidential Page 23
RS9113 USB Half Mini Card Datasheet Version 1.2
Parameter Condition Min. Typ. Max. Units
MCS6 Mixed Mode 15 dBm
MCS7 Mixed Mode 12 dBm
Transmit Power for 40MHz Bandwidth, compliant with IEEE mask and EVM
MCS0 Mixed Mode 14 dBm
MCS7 Mixed Mode 9 dBm
Table 13: WLAN 2.4 GHz Transmitter Characteristics
5.6.1.3 WLAN 5 GHz Receiver Characteristics
Parameter Condition Min. Typ. Max. Units
Sensitivity for 20MHz Bandwidth
6 Mbps OFDM -90.0 dBm
9 Mbps OFDM -89.0 dBm
12 Mbps OFDM -88.5 dBm
18 Mbps OFDM -86.5 dBm
24 Mbps OFDM -83.5 dBm
36 Mbps OFDM -80.0 dBm
48 Mbps OFDM -76.0 dBm
54 Mbps OFDM -74.0 dBm
MCS0 Mixed Mode -89.5 dBm
MCS1 Mixed Mode -88.0 dBm
MCS2 Mixed Mode -85.5 dBm
MCS3 Mixed Mode -82.5 dBm
MCS4 Mixed Mode -79.0 dBm
MCS5 Mixed Mode -74.5 dBm
MCS6 Mixed Mode -73.0 dBm
MCS7 Mixed Mode -71.0 dBm
Sensitivity for 40MHz bandwidth
MCS0 Mixed Mode -85.5 dBm
MCS7 Mixed Mode -67.0 dBm
Maximum Input Level 54 Mbps OFDM -15 dBm
MCS0 Mixed Mode -15 dBm
Redpine Signals, Inc. Proprietary and Confidential Page 24
RS9113 USB Half Mini Card Datasheet Version 1.2
Parameter Condition Min. Typ. Max. Units
Adjacent Channel Rejection 6 Mbps OFDM 32 dB
54 Mbps OFDM 18 dB
PER Floor 0.1 %
RSSI Accuracy ±1 ±3 dB
Table 14: WLAN 5 GHz Receiver Characteristics
5.6.1.4 WLAN 5 GHz Transmitter Characteristics19
Parameter Condition Min. Typ. Max. Units
Transmit Power for 20MHz Bandwidth, compliant with IEEE mask and EVM
6 Mbps OFDM 12 dBm
9 Mbps OFDM 12 dBm
12 Mbps OFDM 12 dBm
18 Mbps OFDM 12 dBm
24 Mbps OFDM 11 dBm
36 Mbps OFDM 11 dBm
48 Mbps OFDM 8 dBm
54 Mbps OFDM 8 dBm
MCS0 Mixed Mode 12 dBm
MCS1 Mixed Mode 12 dBm
MCS2 Mixed Mode 12 dBm
MCS3 Mixed Mode 11 dBm
MCS4 Mixed Mode 11 dBm
MCS5 Mixed Mode 8 dBm
MCS6 Mixed Mode 8 dBm
MCS7 Mixed Mode 7 dBm
Transmit Power for 40MHz Bandwidth, compliant with IEEE mask and EVM
MCS0 Mixed Mode 8 dBm
MCS7 Mixed Mode 4 dBm
Table 15: WLAN 5 GHz Transmitter Characteristics
19
The actual transmit power levels might differ in different regions and channels based on the regulatory constraints.
Redpine Signals, Inc. Proprietary and Confidential Page 25
RS9113 USB Half Mini Card Datasheet Version 1.2
5.6.2 Bluetooth Performance Specifications
5.6.2.1 Bluetooth Receiver Characteristics
Parameter Condition Min. Typ. Max. Units
Sensitivity BR (1 Mbps)20, 339 bytes, DH5 Packet
-92.5 dBm
EDR2 (2 Mbps)21
, 679 bytes, 2-DH5 Packet
-90.5 dBm
EDR3 (3 Mbps)22, 1020 bytes, 3-DH5 Packet
-82.5 dBm
LE (1 Mbps), 37 bytes, Advertising Channel
-91.5 dBm
Maximum Input Level
BR, EDR2, EDR3 -20 dBm
LE -8 dBm
BER Floor 1e-4 %
C/I Performance BR, co-channel 5 dB
BR, adjacent +1 MHz -4 dB
BR, adjacent -1 MHz -7 dB
BR, adjacent +2 MHz -31 dB
BR, adjacent -2 MHz (image)
-25 dB
BR, adjacent >=|±3| MHz -41 dB
EDR2, co-channel 10 dB
EDR2, adjacent +1 MHz -6 dB
EDR2, adjacent -1 MHz -4.5 dB
EDR2, adjacent +2 MHz -32 dB
EDR2, adjacent -2 MHz (image)
-23 dB
EDR2, adjacent >=|±3| -42 dB
20
BER = 0.10% 21
BER = 0.01% 22
BER = 0.01%
Redpine Signals, Inc. Proprietary and Confidential Page 26
RS9113 USB Half Mini Card Datasheet Version 1.2
Parameter Condition Min. Typ. Max. Units
MHz
EDR3, co-channel 19 dB
EDR3, adjacent +1 MHz 3 dB
EDR3, adjacent -1 MHz 4 dB
EDR3, adjacent +2 MHz -26 dB
EDR3, adjacent -2 MHz (image)
-16 dB
EDR3, adjacent >=|±3| MHz
-37 dB
LE, co-channel 21 dB
LE, adjacent +1 MHz 15 dB
LE, adjacent -1 MHz 15 dB
LE, adjacent +2 MHz -17 dB
LE, adjacent -2 MHz -17 dB
LE, adjacent >=|±3| MHz -27 dB
Table 16: Bluetooth Receiver Characteristics
5.6.2.2 Bluetooth Transmitter Characteristics
Parameter Condition Min. Typ. Max. Units
Transmit Power BR, EDR 15 dBm
LE 10 dBm
Power Control Step BR, EDR 1 dB
Adjacent Channel Power |M-N| = 1
EDR -30 dB
Adjacent Channel Power |M-N| = 2
BR -24 dB
EDR -25 dB
LE -22 dB
Adjacent Channel Power |M-N| > 2
BR -42 dB
EDR -45 dB
LE -40 dB
Redpine Signals, Inc. Proprietary and Confidential Page 27
RS9113 USB Half Mini Card Datasheet Version 1.2
Table 17: Bluetooth Transmitter Characteristics
5.6.3 ZigBee Performance Specifications
Parameter Condition Min. Typ. Max. Units
Receive Sensitivity with 1% PER limit
250 kbps, 21 bytes packet size
-100.5 dBm
Receiver Maximum Input Level
250 kbps, 21 bytes packet size
-10 dBm
C/I Performance
(250 kbps, 21 bytes packet size)
Adjacent Channel +5 MHz 38 dB
Adjacent Channel -5 MHz 25 dB
Alternate Channel +10 MHz
45 dB
Alternate Channel -10 MHz
45 dB
Frequency Error Tolerance
±100 ppm
Symbol Error Rate Tolerance
±100 ppm
Transmit Power 15 dBm
Table 18: ZigBee Performance Specifications
5.7 Regulatory Specifications
The RS9113 USB Half Mini Card includes the Dual Band RS9113DB module from Redpine Signals, which has undergone modular certification for FCC, IC ,CE/ETSI and TELEC. Note that any changes to the module’s configuration including (but not limited to) the programming values of the RF Transceiver and Baseband can cause the performance to change beyond the scope of the certification. These changes, if made, may result in the module having to be certified afresh.
The table below lists the details of the regulatory certifications. The certification for geographies not listed in the table is in progress.
Regulatory Certification Grantee Code Product Code Description
FCC XF6 RS9113DB Dual-band Module
IC 8407A RS9113DB Dual-band Module
TELEC 005-101228 RS9113DB Dual-band Module
Table 19: Regulatory Certifications
NOTE: Click on the links below for details on product variants and ordering information:
Redpine Signals, Inc. Proprietary and Confidential Page 28
RS9113 USB Half Mini Card Datasheet Version 1.2
1) Product Variants
2) Ordering Information
5.8 Antenna Specifications
The RS9113 USB Half Mini Cards include Redpine Signals’ Dual Band RS9113DB module which has undergone module certification for FCC, IC ,CE/ETSI and TELEC with Redpine Signals’ Dual-band PCB antenna. The sections that follow list down the performance specifications of the PCB antenna.
5.8.1 Return Loss Characteristic of the Antenna
Figure 5: Return Loss Characteristic of the Antenna
Redpine Signals, Inc. Proprietary and Confidential Page 29
RS9113 USB Half Mini Card Datasheet Version 1.2
5.8.2 Module Reference Orientation
Figure 6: Module Reference Orientation
5.8.3 5.82D Gain Plots
5.8.3.1 XY at 2.43 GHz
Figure 7: 2D Gain Plot for XY at 2.43 GHz
Redpine Signals, Inc. Proprietary and Confidential Page 30
RS9113 USB Half Mini Card Datasheet Version 1.2
5.8.3.2 YZ at 2.43 GHz
Figure 8: 2D Gain Plot for YZ at 2.43 GHz
5.8.3.3 ZX at 2.43 GHz
Figure 9: 2D Gain Plot for ZX at 2.43 GHz
Redpine Signals, Inc. Proprietary and Confidential Page 31
RS9113 USB Half Mini Card Datasheet Version 1.2
5.8.3.4 XY at 5.5 GHz
Figure 10: 2D Gain Plot for XY at 5.5 GHz
5.8.3.5 YZ at 5.5 GHz
Figure 11: 2D Gain Plot for YZ at 5.5 GHz
Redpine Signals, Inc. Proprietary and Confidential Page 32
RS9113 USB Half Mini Card Datasheet Version 1.2
5.8.3.6 ZX at 5.5 GHz
Figure 12: 2D Gain Plot for ZX at 5.5 GHz
5.8.4 Antenna Parameters
Parameter @ 2.43 GHz @ 5.5 GHz
Peak Gain 0.99 dB 4.42 dB
Average Efficiency 87 % 85 %
Table 20: Antenna Parameters
Redpine Signals, Inc. Proprietary and Confidential Page 33
RS9113 USB Half Mini Card Datasheet Version 1.2
6 Software Architecture
6.1 n-Link® Software Architecture
The n-Link® Software Architecture is a host based architecture with OS providing the core functionality support for Wi-Fi, Bluetooth and ZigBee features and having zero load in the data path. The kernel layer interfaces with the host driver to provide functionality for different wireless modules.
The figure belowillustrates the software architecture of the n-Link® Software Architecture with WLAN, Bluetooth and ZigBee.
Figure 13: n-Link®Software Architecture
Redpine Signals, Inc. Proprietary and Confidential Page 34
RS9113 USB Half Mini Card Datasheet Version 1.2
6.1.1 Operating System Support
The n-Link drivers for the RS9113 USB Half Mini Card are presently available for the following OS’:
1) Linux OS (kernel versions 2.6.30 to 3.16)
2) Wind River Linux (kernel version 3.4.91)
3) Android 4.4.3
Operating Systems to be supported in the future include WCE2013 and WCE7.
Redpine Signals, Inc. Proprietary and Confidential Page 35
RS9113 USB Half Mini Card Datasheet Version 1.2
7 Module Marking and Ordering Information
7.1 Module Marking Information
The figure below illustrates the marking on the modules.
Figure 14: Module Marking Information
The table below explains the marking on the modules.
Marking Description
RS9113 Model Numbers for the modules
RS9113-NBZ-D3N Software/Firmware supported . Refer to Product Naming and Variants for more information.
XF6-RS9113DB FCC Grant ID for Dual-band modules.
8407A-RS9113DB IC Grant IDs for Dual-band modules.
005-101228 Japan Type Approval Certificate Number for Dual-band modules
ABC-WWYY
ABC-WWYY-N
Lot Code Information:
ABC – Internal usage
WW – Week of manufacture
YY – Year of manufacture
N - Alternate Flash devices have been added due to the EOL of original Flash device
FCC Compliance Mark
CE Compliance Mark
TELEC Compliance Mark
Table 21: Module Marking Information
Redpine Signals, Inc. Proprietary and Confidential Page 36
RS9113 USB Half Mini Card Datasheet Version 1.2
7.2 Ordering Information
The RS9113 USB Half Mini Card has the following variants.
Part # Wi-Fi
2.4GHz Wi-Fi 5GHz BT ZB
Integrated Antenna
&U.FL SW Variant
RS9113-NBZ-D3N Y Y Y Y Y n-Link®
Table 22: RS9113 USB Half Mini Card Variants
7.3 Collateral
The following documentation and software are available along with the RS9113 USB Half Mini Card.
Datasheet
Device drivers
Technical Reference Manual
7.4 Packing Information
The Half Mini Cards are packaged and shipped in Trays.
Each tray can accommodate 36 cards. The mechanical details of the tray are given in the figure below.
Figure 15: Mechanical Details of Tray
7.5 Contact Information
For additional information, please contact Sales at Redpine Signals, Inc.
Redpine Signals, Inc.
Redpine Signals, Inc. Proprietary and Confidential Page 37
RS9113 USB Half Mini Card Datasheet Version 1.2
2107 North First Street, Suite 680,
San Jose, CA 95131 USA
Phone: +1 408 748 3385
E-mail: [email protected]
Website: http://www.redpinesignals.com/
*****
Redpine Signals, Inc. Proprietary and Confidential Page 38
RS9113 USB Half Mini Card Datasheet Version 1.2
Revision History
Revision No.
Version No.
Date Changes
1. 1.0 June 2015 Initial Version
2. 1.1 June 2015 1) Added Packing Information in Section 7.2.
2) Updated the Product Variants and Part Numbering sections.
3) Updated Antenna parameters.
3. 1.2 August 2017 1) Updated module marking information and regulatory specifications to reflect TELEC certification.
2) Updated module image to reflect TELEC certification.