r.pandian qc inspector(painting coating)_2

Rengarajan Pandian

Date of Birth: 6th June 1973Contact No: (India) +919840369986

Email: [email protected] Present location: Chennai, Tamil Nadu, India.

Career Objective.

An experienced NACE Certified Painting and Coating Inspection Engineer with more than 14 years of Experience in various Oil & Gas, Petrochemical, Heavy Engineering Projects & Paint Manufacturing sectors. I am seeking a position to utilize my knowledge and expertise in Painting, Coating &insulation, engineering aspects during the construction& Maintenance phase.

Academic Qualification:

• Msc., (Chemistry -1995 Annamalai University)

Professional Qualification:

• NACE Level-2 (Coating Inspector), CIP NO; 15467 • NACE Corrosion Technician No.47014

Professional Highlights

Designation : QA/QC Inspector (Coating/Insulation)Organization : Chevron Nigeria Ltd (CNL)Project : EGTL (Escravos Gas to Liquid Project), Delta State, Nigeria.Duration : August -2013 to July-2014

Designation : QA/QC Inspection Engineer (Painting/Insulation/Fireproofing)Organization : KBR Energy and Chemicals ltdClient : Chevron Nigeria Ltd (CNL)Project : EGTL (Escravos Gas to Liquid Project), Delta State, Nigeria.Duration : August -2011 to July-2013

Roles & Responsibilities• Receiving inspection of all materials related to painting, coating, Insulation, lining &

fireproofing• Review and monitor project Painting, Insulation, lining, fireproofing inspection activities as per

approved ITP and Method statements.

• Reviewing sub-contractors Method statement, QCP, RFI, TQ and verifying other necessary verification like Calibration certificate, Product date sheet, MSDS, Paint revalidation details.

• Witnessing the stage wise inspection activities of painting, coating, concrete lining for Tank, vessel, piping, equipments and structures& coating of Buried Pipe coating.

• Witness and check the atmospheric conditions, surface preparation check, WFT, DFT Checks and performing holiday inspections, visual inspections, adhesion and impact etc.,

• Witnessing the stage wise inspections of various insulation activities Heat conservation (HC), Cold conservations (CC), Personal Protection (PP),Acoustic Insulation of equipments, piping and Passive fireproofing( PFP)of structures, Equipments etc.,

• Witnessing the stage wise inspection activities like Moisture test, Concrete tensile strength Dust test Holiday test for heavy crack bridging corrosion resistant concrete lining system for acid and alkaline service.

• Witnessing the all inspection parameters for the Painting & lining of Crude oil tank, condensate tank and raw water storage tank internal and externals.

• Actively involved in tracking & inspection of outstanding Quality form, Punch items related to painting & Insulation.

• Work as an Interface between Engineering, QA/QC, and Painting & Insulation Contractors to ensure a “One team Approach”.

Designation : QC Inspector-PDO Approved (Coating/Insulation/Fireproofing)Organization : Galfar Engg & Contracting SAOG, OmanClient : Shell/PDO/Contract# C-31/0615EPC : Petrofac (PEC)Project : Harweel Cluster Phase II (Enhanced Oil recovery Project), OmanDuration : March – 2009 to June -2011

Designation : QC Inspector-PDO Approved (Coating/Insulation/Fireproofing)Organization : Galfar Engg & Contracting SAOG, OmanClient : Petroleum Development Oman L.L.C /Contract# C-31/0603, OmanProject : Off-Plot Delivery Contract (38” Main oil line Partial replacement)Duration : June – 2008 to March -2009

Roles & Responsibilities

• Communicate Coating and Insulation design and application requirements to Contractors in the execution of their duties without any Non-Conformance.

• Prepare input for the Quality Plan for application of Coating and Insulation work and ensure the jobs are executed by Adhere to engineering procedures, QCP, ITP & Method Statement.

• Conducting necessary Pre-qualification test for paints, Paint system, blasters and painters and making availability of necessary qualification certificates.

• Witnessing various activities of painting like, checking weather conditions, surface cleanliness, surface profile check, Measuring WFT, DFT, Peel test for shrink sleeve field joint coating, high voltage holiday inspection for Stoppaq wrapped coating, shrink sleeves, 3 layer PE coating.

• Witnessing the stage wise inspections of various insulation activities Heat conservation (HC), Cold conservations (CC), Personal Protection (PP), Acoustic Insulation of equipments, piping and fireproofing of structures.

• Perform detailed field inspection of coating and insulation work and provide accurate punch lists for mechanical completion.

• Witnessing the Correct color coding for various service Pipe lines.

Designation : QC Inspector- SABIC Approved (Coating/Insulation)Organization : M/s Sung Chang Al-Shaikh Saudi ArabiaClient : SABICProject : IBZ-ZAHR-Polypropylene III – Offsite & Utility ProjectDuration : Sep – 2007 to May -2008


Monitor Performance and Productivity for Painting, coating, Insulation, Fireproofing work performed by the contractor and ensures adequate levels of supervision.

Perform surveillance, activities monitoring and witness all aspects of Painting starting from the surface preparation to end of final coat. Pre inspection with contractor or subcontractor before final inspection.

Witness and verify all aspects with regards to insulation from Material take off, insulation requirement, material quality during delivery.

Integrate with all disciplines to ensure work is carried out safely and correctly with the correct certification and competency level

Ensure that the documents are approved, reviewed and available at site prior to utilization of materials, equipments, and other construction parameters.

Produce weekly reports for general Superintendent Ensure assigned jobsite operations are in compliance with design specifications, completion on

schedule and to quality standards. Monitor project schedules, staffing charts, material availability and equipment requirements Monitor project plans and specifications for constructability, conformance to regulatory agency

requirements and productivity improvement. Provide technical direction and guidance to the subcontractors and ensure the Technical Queries

and Engineering change request are answered in a reasonable timescale. Review handover, punch list items, carry over works, shipped loose items and disconnects proposed

from the yards.

Designation : Senior Engineer – Paint Shop (Quality control)Organization : M/s .Mitsubishi Motor Corporation, IndiaDuration : May – 2005 to SEP-2007


Receiving paint material inspection like viscosity, specific gravity, shade matching, Paint shop Process inspection like measuring Relative humidity, dew point, Lux level, downdraft velocity and final inspection of painted components to check the DFT, Gloss level, adhesion, impact resistance, humidity resistance, salt spray resistance.

Monitoring and recording the stage wise painting process inspection like booth weather condition, paint mixing, paint application parameters in Airless , Conventional, HPLV Spray application and conducting pre qualification test for painters.

Handled the process of 7 tank hot phosphating, CED, Pretreatment bath management, spray painting techniques and trouble shooting of painting defects. Handled process control equipments like dust counter, lux meter and QC instruments like Spectro photo meter, Gloss meter, Wave Scanner, adhesion and impact tester.

Designation : Officer – Inspection & Technical ServiceOrganization : M/s MRF Specialty Coating Division, IndiaProject : Paint Manufacturing & Technical ServiceDuration : March – 2000 to April -2005

Designation : Officer – Inspection & Technical ServiceOrganization : M/s Kansai Nerolac Paints, IndiaProject : Paint Manufacturing & Technical ServiceDuration : Sep – 1995 to Feb -2000


• Job responsibilities include Site Coating Inspection, On Site Trial Performance, Corrosion Auditing, Painting System Recommendation, Paint Revalidation & Handled the Site Inspection as well as technical services for the following projects

1. ICF(Chennai) Train coach painting with Epoxy / PU system2. Indian Oil corporation(IOCL) ;Painting of Product storage tank3. ONGC, Mangalore; Xylene Plant painting4. GMR Power Plant, Chennai India ; Heat resistant aluminum painting5. Ford India Ltd; Painting of plastic components like PP, FRP, ABS6. Chennai Petrol Chemical Corporation (CPCL) Chennai; Fire water line painting

Familiar Codes & Inspection Skills

• Conversant with International Standards ASTM, SSPC, NACE, BS, ISO, & Insulation standard CINI.

• Conversant with Shell DEP’S, SP’S & ERD’S related to Painting, coating & Insulation• Conversant with inspection techniques such as Ambient conditions, Surface profile check,

Chloride test, WFT, DFT,, Adhesion test, Spark test etc.,• Experienced in the inspection of pipeline field joint coatings like FBE Coatings, 3layer PE&PP

coatings, Heat shrink sleeve, stopaq wrapping etc.,• Experienced in the inspection of specialty coatings like epoxy, Inorganic Zinc silicates,

Polyurethane, Silicon acrylic, heat resistant silicon aluminum, Glass flake vinyl ester, Glass flake epoxy, hot dip galvanizing etc.,

• Experienced in the inspection of Fireproofing, hot, cold, acoustic, PP Insulations & heavy duty crack bridging concrete linings.

Training Attended

• H2S awareness and escape training conducted by OTI, PDO’s HSE training service, Oman• Confined Space Entry Training Conducted by M/s Petrofac, Harweel project, Oman• Awareness programmers’ in FSI( Flawless Start-up Initiative), conducted by M/s Petrofac in

Oman• Trained in 7QC tools, kemba kaizen, PFMEA(Process failure mode effective analysis)• First Aid & CPR Conducted by KBR Nigeria• Hazard communication conducted by KBR Nigeria• TSTI(Total safety Task instruction) & TSTO(Total safety Task observation) conducted by M/s

KBR NigeriaPersonal Details

• Date of Birth : 6th June 1973• Nationality : Indian• Marital Status : Married• Languages Known : English, Tamil, Hindi,Marathi,Malayalam• Passport Details : M1672925• Date of Issue : 27.08.2014• Date of Expiry : 26.08.2024• Permanent address: F-3 Akshaya Arcade, No.55 Janakiram Reddy Colony,

2nd Main Road, Villivakkam, Chennai, India - 600049• Nearest Airport : Chennai, Tamil Nadu, India.• Notice Period : Immediately Available

References

1. Mr Andy Deveney,TCO EW Completion CoordinatorTCO-WPMP Future Growth Project,Email- [email protected] Mobile; +7-702-6896450UK Mobile; +44(0) 7765886684

2. Mr. James (Jim) Ash, 3 Mr. James StevensWheatstone Site QA Manager EGTL Site QA ManagerChevron Australia. Chevron Nigeria LtdEmail; [email protected] E mail; [email protected];Mobile; +610428797533 [email protected]

mailto:[email protected]




r.pandian qc inspector(painting coating)_2

Documents