rotary ball mill, ceramic powder plant · rotary ball mill, ceramic powder plant challenge...

Technical data reflects results of laboratory tests and is intended to indicate general characteristics only. A.W. Chesterton Company disclaims all warranties expressed or implied, including warranties of merchantability and fitness for a particular purpose. Liability, if any, is limited to product replacement only. Any images contained herein are for general illustrative or aesthetic purposes only and are not intended to convey any instructional, safety, handling or usage information or advice respecting any product or equipment. Please refer to relevant Safety Data Sheets, Product Data Sheets, and/or Product Labels for safe use, storage, handling, and disposal of products, or consult with your local Chesterton sales representative. A.W. Chesterton Company 860 Salem Street, Groveland, MA 01834 USA © A.W. Chesterton Company, 2014. All rights reserved. ® Registered trademark owned and licensed by A.W. Chesterton Company in USA and other countries, unless otherwise noted. WWW.CHESTERTONLUBRICANTS.COM Chesterton Lubricants/MRO Chemicals Results Improved Productivity & Savings ■ ■ Increased belt life by 100% and improved process efficiency by 5% ■ ■ Customer avoided cost of new belt sets ■ ■ Production remained up and running ■ ■ The application of Chesterton 730 Spragrip took only 10 minutes EN23687 12/14 Rotary ball mill driven by 18 V-belts, which were slipping. Apply Chesterton 730 Spragrip to eliminate belt slippage. Spragrip extends belt life and reduces lost production. Solution Cost-Effective Belt Dressing ■ ■ Apply Chesterton 730 Spragrip where the belts entered the pulley ■ ■ Apply aerosol belt dressing from a safe distance using the pinpoint stream ■ ■ The belt flapping stopped immediately, indicating belt slippage was eliminated Mining Products: Chesterton 730 Spragrip® Case Study 031 LMRO Rotary Ball Mill, Ceramic Powder Plant Challenge Background ■ ■ A ball mill pulverizing ceramic powder was driven by a set of 18 belts which had stretched and were slipping ■ ■ The result was a loss of power and rpm. The slipping increased operating temperature of the belts, causing a significant reduction in belt life ■ ■ A new set of belts cost $3,000 and required 24 hours to install – one full day of lost production

Upload: others

Post on 12-Mar-2020

10 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: Rotary Ball Mill, Ceramic Powder Plant · Rotary Ball Mill, Ceramic Powder Plant Challenge Background A ball mill pulverizing ceramic powder was driven by a set of 18 belts which

® Registered trademark owned and licensed by A.W. Chesterton Company in USA and other countries, unless otherwise noted. WWW.CHESTERTONLUBRICANTS.COM

Chesterton Lubricants/MRO Chemicals

Results

Improved Productivity & Savings

■■ Increased belt life by 100% and improved process efficiency by 5%

■■ Customer avoided cost of new belt sets

■■ Production remained up and running

■■ The application of Chesterton 730 Spragrip took only 10 minutes

EN23687 12/14

Rotary ball mill driven by 18 V-belts, which were slipping. Apply Chesterton 730 Spragrip to eliminate belt slippage. Spragrip extends belt life and reduces lost production.

SolutionCost-Effective Belt Dressing

■■ Apply Chesterton 730 Spragrip where the belts entered the pulley

■■ Apply aerosol belt dressing from a safe distance using the pinpoint stream

■■ The belt flapping stopped immediately, indicating belt slippage was eliminated

Mining Products: Chesterton 730 Spragrip® Case Study 031 LMRO

Rotary Ball Mill, Ceramic Powder Plant

Challenge

Background

■■ A ball mill pulverizing ceramic powder was driven by a set of 18 belts which had stretched and were slipping

■■ The result was a loss of power and rpm. The slipping increased operating temperature of the belts, causing a significant reduction in belt life

■■ A new set of belts cost $3,000 and required 24 hours to install – one full day of lost production

WIRE WOUND RESISTORS CERAMIC ENCASED TYPE HSVA/HSVAU · Alloy Wire Wound Element On Heat Conducting Ceramic / Fibre Glass Substrate Fire Proof Ceramic Housing Quartz Silica Powder