rota qsig central 3

Connected To: 192.168.1.3 - 1-23

+++ 0055-3333-0810-0001 2010-05-18 +2+ 15:37+ #0030 VDU010 ><dinars:0,21DESTINATION ID: D=Destination, L=Line, P=Paging route, Q=A-queue, S=Server, U=Unit DESTINATION TREE CODE ANALYSIS RESULT NUMBER ID NUMBER 0 21 Trunk access code 0 D 0 0 21 Trunk access code *3 D 49 0 21 Trunk access code *6 D 48 0 21 Trunk access code *7 D 48 0 21 Trunk access code *852 D 26 0 21 Trunk access code *855 D 24 0 21 Trunk access code *887 D 8 0 21 Trunk access code *888 D 17 0 21 Trunk access code *889 D 18 EXECUTED<didest:49

DEST TREE FST-DT SND-DT ACC-REP ROUTE-TABLE DELAY-SEIZURE NUMB-PLAN

49 - 0 0 - - D 0 -EXECUTED<didest:48


48 18 1 0 0 48 D 0 0EXECUTED<dinars:19Error 8: Non existing value of parameter 1REJECTED<dinars:0,21DESTINATION ID: D=Destination, L=Line, P=Paging route, Q=A-queue, S=Server, U=Unit DESTINATION TREE CODE ANALYSIS RESULT NUMBER ID NUMBER 0 21 Trunk access code 0 D 0 0 21 Trunk access code *3 D 49 0 21 Trunk access code *6 D 48 0 21 Trunk access code *7 D 48 0 21 Trunk access code *852 D 26 0 21 Trunk access code *855 D 24 0 21 Trunk access code *887 D 8 0 21 Trunk access code *888 D 17 0 21 Trunk access code *889 D 18 EXECUTED<didest:49


49 19 1 0 0 49 D 0 0EXECUTED<dinars:19;Error 8: Non existing value of parameter 1REJECTED<dirota:49

ROUTE-TABLE UNIT SEQUENCE-TABLE

49 1 1

NORMAL EXTENSION OPERATOR PRIORITY EXTENSIONROUTE PREF TRFC SMART ROUTE PREF TRFC SMART ROUTE PREF TRFC SMART - - - - - - - - 9 p 1 No EXECUTED<chrota:?Change route table

CHROTA: <ROUTE-TABLE>[,[<USER-TYPE>][,<SEQ-TABLE/ZONE>][,<UNIT>]];

When USER-TYPE is omitted, all user types will be adapted.When SEQUENCE-TABLE is omitted, 1 will be assumed.

By means of additional parameters the route table data is to be given.<chrota:49,?

USER-TYPE : User type code (0..2)0 = normal extension1 = operator2 = priority extension<chrota:49Enter route table data <ROUTE>,<PREF-CODE>,<TRFC>[,<SMART-BOX-EM>]: ^XMessage 222: Command aborted<dirout:9

ROUTE UNIT BSPT GEN-OPTS GEN-TONE CV CC-TABLE 9 1 - 000000000000000 222222 0 -

INC-OPTS TONE-AND-DDI-OPTS TREE A-QUEUE OVE SCNE 00000000000 000000000 - 16 - -

OUT-OPTS ATF 100000 0

NO INCOMING DIGIT CONV. ON THIS ROUTE (USE DIDGCO FOR OUTGOING DIGIT CONV.)

SEQ BUNDLE 0 49EXECUTED<dibndl:49

BUNDLE BSPT ROUTE UNIT DIR-AND-NEG OPTIONS CON-AND-SIG-TYPE ALL-CALLS 49 - 9 1 0 - 0000100000000000 0 0 -

NO LINES ASSIGNED TO THIS BUNDLEEXECUTED<dinars:0,21DESTINATION ID: D=Destination, L=Line, P=Paging route, Q=A-queue, S=Server, U=Unit DESTINATION TREE CODE ANALYSIS RESULT NUMBER ID NUMBER 0 21 Trunk access code 0 D 0 0 21 Trunk access code *3 D 49 0 21 Trunk access code *6 D 48 0 21 Trunk access code *7 D 48 0 21 Trunk access code *852 D 26 0 21 Trunk access code *855 D 24 0 21 Trunk access code *887 D 8 0 21 Trunk access code *888 D 17

0 21 Trunk access code *889 D 18 EXECUTED<didest:49


49 19 1 0 0 49 D 0 0EXECUTED<dinars:19Error 8: Non existing value of parameter 1REJECTED<dirout:9


INC-OPTS TONE-AND-DDI-OPTS TREE A-QUEUE OVE SCNE 00000000000 000000000 - 16 - -



SEQ BUNDLE 0 49EXECUTED<chrtcg:?Change route characteristics general

CHRTCG: <ROUTE>,<GEN-OPTS>,<GEN-TONE>[,[<CV>][,[<BSPT>][,<CC-TABLE-NR>]]];

If CV is omitted, the projected default value is assumed.<dirout:8


INC-OPTS TONE-AND-DDI-OPTS TREE A-QUEUE OVE SCNE 10100000000 114699999 81 16 - -



SEQ BUNDLE 0 8EXECUTED<chrtcg?Error 212: Question mark at illegal positionREJECTED<chrtcg:?Change route characteristics general

CHRTCG: <ROUTE>,<GEN-OPTS>,<GEN-TONE>[,[<CV>][,[<BSPT>][,<CC-TABLE-NR>]]];

If CV is omitted, the projected default value is assumed.<chrtcg:9,?

GEN-OPTS: General route options. Format: PQRSTUVWXYZ[A[B[C[D]]]](For all options: 0 = No, 1 = Yes)P = data protection applied X = time-break checkQ = assistance required Y = time-break enabledR = add-on allowed Z = CNND translationS = toll-ticketing on route A = Network priority/Force release possibleT = impulse post dialling allowed B = line park allowedU = keytone post dialling allowed C = QSIG segmenting allowedV = enquiry on trunk allowed D = Closed number scheme presentationW = flexible operator assistance available<chrtcg:9,011111101110110,?

GEN-TONE: General route tone types. Format: PQRSTUP = tone type before answer (2..5)Q = tone type after answer (2..5)R = tone type during hold conditions (0..3)S = tone type for COB before answer (0..6)T = tone type for COB after answer (0..6)U = tone for special recall of operator (0..5)Tone types are:0 = moh or no tone 4 = internal ring back tone1 = moh or waiting tone 5 = external ring back tone2 = no tone 6 = busy tone3 = waiting tone<chrtci:?Change route characteristics incoming

CHRTCI: <ROUTE>,<INC-OPTS>,<TONE-AND-DDI-OPTS>[,[<TREE>][,[<A-QUEUE>] [,<BSPT>]]];

When <INC-OPTS> 'DDI-traffic on route' = Yes, then <TREE> is required.<chrtci:9,?

INC-OPTS: Options for incoming traffic. Format: PQRSTUV[WXYZ] (0 = No, 1 = Yes)P = DDI-traffic on routeQ = Break-in protectionR = Transit allowedS = Malicious Call Trace allowedT = Announcement allowedU = Answer before announcementV = Calling party controlW = DDI-delay time required (omit if P = No)X = DDI-barred check on inc. calls (omit if P = No)Y = DDI-call waiting required (omit if P = No)Z = Socotel shortened protocol (omit if P = No)<chrtci:9,10100000000,?

TONE-AND-DDI-OPTS: Incoming tone types and DDI characteristics.Format: PQ[RSTUVWX]P = busy tone before answer for release (0 = No, 1 = Yes)Q = busy tone after answer for release (0 = No, 1 = Yes)R = DDI dial tone to be sent to external (0..4)S = Traffic class (0..7)T = Action when DDI to busy extension (0..9)U = Action when DDI dial time out (0..9)V = Action when DDI ringing time out (0..9)W = Action when DDI to unallocated number (0..9)X = Action when unsuccessful DDI call (0..9)DDI dial tone 0..4 is (parameter R):0 = no tone 2 = external dial tone 4 = external ring tone

1 = internal dial tone 3 = internal ring toneActions 0..9 are (parameters T..X):0 = busy tone 4 = cob and send answer 8 = op. or no act.1 = nu tone 5 = op. or busy tone 9 = operator or night extension2 = clear backward 6 = op. or nu tone3 = no action 7 = op. or clr back<chrtci:9,10100000000,114699999,81EXECUTED<dinars:81DESTINATION ID: D=Destination, L=Line, P=Paging route, Q=A-queue, S=Server, U=Unit DESTINATION TREE CODE ANALYSIS RESULT NUMBER ID NUMBER 81 10 Internal number 2 D - 81 10 Internal number 3 D - 81 91 Network access code 403 D 21 81 132 PVN user channel address 4998 U 1 81 132 PVN user channel address 4999 U 1 EXECUTED<chrtco:?Change route characteristics outgoing

CHRTCO: <ROUTE>,<OUT-OPTS>,<ATF>[,<BSPT>];<chrtco:9,?

OUT-OPTS: Outgoing route options. Format PQRST[U] (0 = No, 1 = Yes)P = Direct switch throughQ = Break-in protection on outgoing callsR = D-button allowedS = Transit allowedT = Source identificationU = Insert or append close sign<chrtco:9,001000,?

ATF: Automatic trunk find (0..2)0 = no ATF1 = ATF by camp on busy2 = ATF by automatic ring back<chrtco:9,001000,0EXECUTED<dirout:9


INC-OPTS TONE-AND-DDI-OPTS TREE A-QUEUE OVE SCNE 10100000000 114699999 81 16 - -



SEQ BUNDLE 0 49EXECUTED<dibndl:49

BUNDLE BSPT ROUTE UNIT DIR-AND-NEG OPTIONS CON-AND-SIG-TYPE ALL-CALLS 49 - 9 1 0 - 0000100000000000 0 0 -

NO LINES ASSIGNED TO THIS BUNDLEEXECUTED<asbndl:?Assign bundle to route

ASBNDL: <ROUTE>,<BUNDLE>;<chbndc:?Change bundle characteristics

CHBNDC: <UNIT+BUNDLE>,<DIR-AND-NEG>,<OPTIONS>,<CON-AND-SIG-TYPE> [,[<ALL-CALLS>][,<BSPT>]];

If ALL-CALLS is omitted no maximum to the number of allowed calls for thebundle will be applied.<chbndc:49,?

DIR-AND-NEG: Bundle direction and negotiation rule. Format P[Q]P = bundle direction (0..2): 0 = incoming, 1 = outgoing, 2 = both wayQ = ISDN or QSIG negotiation rule (0..2): Should be omitted when the bundle signalling type is non-ISDN and non-QSIG. For ISDN: 0 = any B-channel, 1 = exclusive B-channel, 2 = preferred B-channel For QSIG: 1 = exclusive B-channel, 2 = preferred B-channel<chbndc:49,22,0000100000000000,?

CON-AND-SIG-TYPE: Bundle connection and signalling type. Format PQ.P = connection type (0..5): 0 = four wire tie line 1 = two wire pstn line 2 = two wire tie line 3 = digital pstn line 4 = digital tie line 5 = virtual connectionQ = signalling type (0..22) INCOMING OUTGOING INCOMING OUTGOING 0 = Impulse Impulse 1 = Impulse/KT sensitive Impulse 2 = Keytone Keytone 3 = MFC-R2 Keytone 4 = KeytoneCli KeytoneCli 5 = Keytone after answer Keytone 6 = DPNSS-x DPNSS-x 7 = DPNSS-y DPNSS-y 8 = MFP MFP 9 = MF-socotel MF-socotel 10 = DASS DASS 11 = MFE MFE 12 = Not used Not used 13 = MFC-CSS1 MFC-CSS1 14 = ISDN-a ISDN-a 15 = ISDN-b ISDN-b 16 = DPNSS-PVN DPNSS-PVN 17 = DPNSS-x DPNSS-VM-x 18 = DPNSS-y DPNSS-VM-y 19 = Virtual lines Virtual lines 20 = QSIG-a QSIG-a 21 = QSIG-b QSIG-b 22 = QSIG-PVN QSIG-PVN 23 = CCIS CCIS 24 = SIP_TRK SIP_TRK <chbndc:49,22,0000100000000000,420EXECUTED<dibndl:49

BUNDLE BSPT ROUTE UNIT DIR-AND-NEG OPTIONS CON-AND-SIG-TYPE ALL-CALLS 49 - 9 1 2 2 0000100000000000 4 20 -

NO LINES ASSIGNED TO THIS BUNDLEEXECUTED<asline:?Assign line to bundle

ASLINE: <BUNDLE>,<LINE>,<SHELF>,<BRD>,<CRT>[,<B-CHANNEL>];

If B-CHANNEL is omitted and the EHWA identifies an ISDN trunk circuit then allB-channels of that circuit are assigned to the bundle.<asline:49,0015,11,9,0,16Error 6: Parameter 6 out of rangeREJECTED<177Error 219: No colon at position 7 encounteredREJECTED<asline:49,0017,11,9,0,17EXECUTED<dibndl:49

BUNDLE BSPT ROUTE UNIT DIR-AND-NEG OPTIONS CON-AND-SIG-TYPE ALL-CALLS 49 - 9 1 2 2 0000100000000000 4 20 -

SEQ SHELF BRD CRT B-CH LINE 0 11 9 0 12 0012 1 11 9 0 13 0013 2 11 9 0 14 0014 3 11 9 0 15 0015 4 11 9 0 17 0017 Access shared by multiple bundlesEXECUTED<diserv:11,9,0,12&&17

SHELF BRD CRT B-CH B-CH-STATUS

11 9 0 12 free 11 9 0 13 free 11 9 0 14 free 11 9 0 15 free 11 9 0 17 free EXECUTED

rota qsig central 3

Documents