risc-kit: resilience-increasing strategies for coasts – toolkit
TRANSCRIPT
![Page 1: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/1.jpg)
Ap van Dongeren, Paolo Ciavola, Christophe Viavattene, Simone de Kleermaeker, Grit Martinez, Oscar Ferreira, Cristina Costa and Robert McCall (18 EU partners incl 10 CSS)
UK Case Study Partner: Tom Spencer, Anna McIvor, Elizabeth Christie and Iris Möller, Cambridge Coastal Research Unit, University of Cambridge.
Case study site: North Norfolk (SMP5)
Other UK partner: Christophe Viavattene, University of Middlesex (vulnerability, damage curves etc)
RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT
www.risckit.eu This project has received funding from the European Union’s Seventh Programme for Research, Technological Development and Demostration under Grant Agreement No. 603458. This presentation reflects the views only of the authors, and the European Union cannot be considered liable for any use that may be made of the information contained therein.
![Page 2: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/2.jpg)
The RISC-KIT concept
Develop a Resilience-Increasing Strategies for Coasts – toolKIT (RISC-KIT) of
•methods
•tools
•management approaches
to reduce risk and increase resilience to extreme events (storm surge flooding or riverine flash floods)
Timeline: November 2013 to April 2017
![Page 3: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/3.jpg)
Contents
• RISC-KIT summary • UK case study site • Coastal flood modelling
• Aims for the modelling • Model train • FEWS system
• Representing vegetation in a wave model
• Modifications to the SWAN Vegetation module • Results
![Page 4: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/4.jpg)
RISC-KIT summary
Historical Storms (Storm database)
Hotspot selection
Coastal numerical modelling and
scenario testing
Disaster Risk Reduction measures (DRR)
Bayesian model (Total impact)
Coastal Vulnerability library
Modification of existing models
![Page 5: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/5.jpg)
HUNSTANTON
WELLS-NEXT-THE-SEA SHERINGHAMCROMER
RISC-KIT Case Study Site
©Crown Copyright and Database Right (2014) Ordnance Survey (Digimap Licence)
NORTH SEA
N
2 km
HOLT
Case study site
• 10 case study sites, representing different coastal environments
• UK case study site North Norfolk • 45km stretch of coast • Natural coastline with some
towns and villages, important area for nature conservation
• Based on existing management unit (UK Shoreline Management 5)
![Page 6: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/6.jpg)
• Tide dominated • Meso- to macro-tidal • Complex topography
• Barrier islands • Back barrier marshes • Tidal channels • Open marshes • Shingle barriers • Sand dunes
• Coastline formed during the Holocene, i.e. this coast is less than 10,000 years old
Scolt Head Island, North Norfolk (Photo: Mike Payne)
Site Characteristics: Geomorphology
![Page 7: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/7.jpg)
FEWS workshop, Antwerp, 20-21 April 2015
Site Characteristics: Ecosystems
![Page 8: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/8.jpg)
• 11/3/1883 • 28/11/1897 • 26/08/1912 • 08/01/1949 • 01/03/1949
• 31/01/1953 • 20/03/1961 • 15/02/1962 • 29/09/1969 • 02/01/1976
• 11/01/1978 • 12/12/1990 • 20/02/1993 • 10/01/1995 • 19/02/1996 • 14/12/2003 • 01/11/2006 • 17/03/2007
• 08/11/2007
• 05/12/2013
(Steers, 1953)
John Tuck
John Tuck
Historic Flooding
![Page 9: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/9.jpg)
Coastal Flood modelling
Future Outputs: 1. Coupled meteo, wave and tide models are set up
for the hotspot site within the coastal FEWS system.
2. The coupled coastal models will be used for scenario testing for • Future climate change scenarios (2100) • Historic storm surges • Disaster Risk Reduction (DRR) plans A Bayesian based Decision support system (DSS) will be applied to the case study site with data of hazard forcing, density and value of receptors
3. The scenarios will train the probabilistic relations in the Bayesian DSS
Maximum surge (cm) during 1953 storm using POL CS3
model (Wolf and Flather, 2005)
![Page 10: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/10.jpg)
Coastal Flood model
Aim of the modelling:
1) To determine hazards at the hotspot site
2) To help understand the hazard pathways with the case study site
![Page 11: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/11.jpg)
Storm surge modelling: Tide and surge
• CS3X tidal surge model • Run by the National Oceanography Centre (NOC) • 12km grid resolution • Assumes no flow normal to the boundary • Data available from 1992 +
NOC
![Page 12: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/12.jpg)
Storm surge modelling: Waves and Meteo
•MetOffice WaveWatch III (WWIII) model •North Atlantic and European Configuration has a 12km grid resolution • Deep water wave model, doesn’t include some processes important in shallow waters • Data available from 1990 + Significant wave height (m)
National Centre for Ocean Forecasting (www.ncof.co.uk)
![Page 13: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/13.jpg)
Numerical Models: TELEMAC
• Open source suite of solvers for free surface flows • Multiple modules to represent various physical processes • Designed for coastal and riverine domains • TELEMAC-2D module for hydrodynamics •Solves the shallow water equations : depth integration of the 3D Navier-Stokes equations •Turbulence closure schemes •Various options for source and sink terms
![Page 14: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/14.jpg)
![Page 15: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/15.jpg)
Numerical Models: SWAN
•SWAN (Simulating WAves Nearshore) is a third generation wave model (Booij et al., 1999). •Developed by TU Delft • The energy density spectrum describes wave energy over frequencies and direction, it can be sued to obtain wave parameters • SWAN solves the wave action balance equation and includes source and sink terms for energy generation, dissipation and non-linear interactions.
Holthuijsen (2007)
![Page 16: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/16.jpg)
North Norfolk: Model Train
FEWS
Small SWAN wave model
TELEMAC 2D model
Large SWAN wave model
Discharge at fixed
locations
Water levels/currents from CS3/CS3X
(NOC)
Wind Conditions (MetOffice)
Wave Spectra WaveWatch III
(MetOffice)
TELEMAC flood model
(Wells-next-the-sea)
Water levels
Wave spectra
TELEMAC flood model
result
EurOtop overtopping
Large Scale TELEMAC and SWAN model extent
Fine resolution SWAN model extent
![Page 17: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/17.jpg)
•The numerical models compute the local hazard intensities for historic and future storm scenarios •Information on receptors and the vulnerability libraries are applied to the hotspot in the DSS •The Bayesian Network can then calculate the impact of the different hazards
Bayesian Decision Support System
![Page 18: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/18.jpg)
Modification of existing models
Adapted from Möller et al. 1999
The case study site has a fairly natural coastline, with large areas of saltmarsh
Large amount of field evidence of wave attenuation in saltmarsh, reed beds and other vegetation
![Page 19: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/19.jpg)
Wave dissipation due to vegetation in SWAN
The current SWAN vegetation module uses a modified version of the Dalrymple (1984) wave dissipation formula by Mendez and Losada (2004) to calculate the wave dissipation due to vegetation (Sveg) Energy dissipation is based on plant characteristics: • Plant height Hv
• Vegetation diameter, Dv
• Number of plants per m2 , Nv
• Bulk drag coefficient, CD
All the parameters can vary vertically, and Nv can vary spatially.
SWAN is a spectral wave model and includes sources and sink terms for energy generation and dissipation. Dissipation due to vegetation , Sds,veg, is calculated within a vegetation module, SWAN-VEG (Suzuki et al., 2011).
![Page 20: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/20.jpg)
Modifications to the vegetation module However, the drag coefficient, CD, has been shown to vary with the ambient wave conditions(Kobayashi et al. (1993), Mendez et al. (1999), Mendez and Losada (2004), Mӧller et al. (2014)). Stem Reynolds number, Rev ; where Um is the maximum bottom orbital velocity, D is the vegetation diameter, and ν is the kinematic viscosity (ν = 1 × 10-6m2s-1) The drag coefficient expressed in terms of the stem Reynolds number, and is usually in the form: where a, b and c are empirically derived constants.
Relationship between CD and vegetation Reynolds number, Rev. From Mӧller et al. 2014
![Page 21: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/21.jpg)
I Möller
Modifications to the vegetation module
(from Möller et al., 2014)
• Mӧller et al. (2014) detailed wave dissipation measurements over a 40m section of saltmarsh in the large wave flume in Hannover. • The experiment used storm surge conditions and a saltmarsh which is representative of those found in North West Europe. •The drag coefficient was calculated using the Mendez and Losada (2004) formula and expressed as a function of the stem Reynolds number for regular and irregular waves.
Irregular waves:
![Page 22: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/22.jpg)
Modifications to the vegetation module
SWAN MODEL MODIFICATIONS: • Included a time varying drag coefficient based on the empirical equation of Mӧller et al. (2014) for irregular waves over a saltmarsh • Included a time varying drag coefficient formula with empirical coefficients defined in the SWAN steering file • Included the ability to vary the plant height spatially
![Page 23: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/23.jpg)
Wave dissipation due to vegetation in SWAN
The new variable drag coefficient formulation within SWAN is validated against the Mӧller et al. (2014) Large Wave Flume experiments. Which measured wave dissipation under storm conditions over a 40m test section of transplanted saltmarsh. Plant diameter = 0.00125m Plant height = 0.7m Number of plants per m^2 = 1225 The new SWAN-VEG module gives a better fit to the experimental data, especially at high significant wave heights representing storm waves.
![Page 24: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/24.jpg)
Validating the modified vegetation module
Further validation over a 197m transect at the Stiffkey, North Norfolk saltmarsh using the wave dissipation measurements of Mӧller et al. (1999). Only the experimental data with onshore winds that run parallel to the transect included
Möller et al. (1999)
The predicted wave height reduction shows a very good agreement with the measured results
The vegetation height is derived from side-on photographs of the vegetation at Stiffkey (Mӧller et al. 1999), where Hv = 0.11m The plant diameter is assumed to be Dv = 0.00125m, from Mӧller et al. (2014). The plant density is assumed to be similar to a saltmarsh transect at Tillingham, Essex, Nv = 1061.
![Page 25: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/25.jpg)
Validating the modified vegetation module
The new SWAN-VEG module is validated against the wave dissipation measurements of Mӧller (2006) at Tillingham, Essex coast, UK. Using 3 short transects of ~4m with differing vegetation types
Transect Composition Mean
Vegetation
Height (m)
Mean
Vegetation
Diameter (m)
Mean number
of plants per
m2
1 Spartina 86%
Salicornia 11%
0.151 6.01x10-3 1061
2 Spartina 73%
Salicornia 25%
0.225 5.53x10-3 1089
3 Salicornia 98% 0.059 3x10-3 521
Some of the vegetation characteristics have been derived
![Page 26: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/26.jpg)
Validating the modified vegetation module
Transect Composition Mean
Vegetation
Height (m)
Mean
Vegetation
Diameter (m)
Mean number
of plants per
m2
1 Spartina 86%
Salicornia 11%
0.151 6.01x10-3 1061
2 Spartina 73%
Salicornia 25%
0.225 5.53x10-3 1089
3 Salicornia 98% 0.059 3x10-3 521
![Page 27: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/27.jpg)
Validating the modified vegetation module
Next Step: Testing the new vegetation module in the 2D coastal wave model and assessing the impact of the vegetation on hazards at our site
![Page 28: RISC-KIT: Resilience-Increasing Strategies for Coasts – toolKIT](https://reader031.vdocuments.mx/reader031/viewer/2022030322/588c51001a28ab69218b4801/html5/thumbnails/28.jpg)
Acknowledgements
The Environment Agency, UK: Eleanor Heron, Michelle Partridge, David Welsh, David Kemp, Guy Cooper, Rebecca Brown and Mark Johnson
The Flood Forecasting Centre, UK: David Cox
The Meteorological Office, UK: Andy Saulter
Various people who agreed to be interviewed about recent experiences of flooding and current practice in risk management on the North Norfolk Coast.
AM