revolutionary heading sensor satellite compass std21 kgc-1 brochures.pdf · revolutionary heading...

12
Catalogue No. N-859 R R TRADE MARK REGISTERED MARCA REGISTRADA Revolutionary heading sensor SATELLITE COMPASS Model SC-50 The future today with FURUNO’s electronics technology. FURUNO ELECTRIC CO., LTD. 9-52 Ashihara-cho, Nishinomiya City, Japan Phone: +81 (0)798 65-2111 Fax: +81 (0)798 65-4200, 66-4622 URL: www.furuno.co.jp

Upload: votu

Post on 19-Jul-2018

227 views

Category:

Documents


0 download

TRANSCRIPT

Catalogue No. N-859

R

R

TRADE MARK REGISTERED

MARCA REGISTRADA

Revolutionary heading sensor

SATELLITE COMPASSModel SC-50

The future today with FURUNO's electronics technology.

FURUNO ELECTRIC CO., LTD.9-52 Ashihara-cho, Nishinomiya City, Japan Phone: +81 (0)798 65-2111

Fax: +81 (0)798 65-4200, 66-4622 URL: www.furuno.co.jp

The SC-50 is a new satellite compass that uses Furuno�sadvanced GPS technology. This satellite compass can beused for a wide range of applications for any type ofvessel. Radar/ARPA, AIS, ECDIS, Scanning Sonar andAutopilots can utilize the functions of this compass.The SC-50 uses GPS carrier frequency to determineheading and is not affected by ship's speed, latitude,geomagnetism, etc. Settling time is nearly instantaneousand the follow-up performance is excellent, achieving45°/s (SOLAS HSC Code requires 20°/s as a minimum).

The SC-50 delivers GPS positioning, SOG (Speed OverGround), COG (Course Over Ground) and ROT (Rate ofTurn). SOG is remarkably accurate through decoding theDoppler shift in the received satellite signals. Theinformation can be output in IEC61162-2 format at thehigh update rate up to 38.4 kbps to satisfy the high speeddata-output requirements in special applications.

Precision roll and pitch data is output in both analog anddigital formats to external equipment. For sonar or echosounders, the SC-50 offers stable echo pictures bycompensating the transmitted/received beams even inrough seas. Thus, the SC-50 can also function as ahighly accurate motion sensor.

The SC-50 has a unique Set and Drift mode. Whenconnected with a water-tracking speed log, such as the DS-80, it calculates set and drift (tide direction andspeed) in the mode. The display helps a radar operatormanually enter set and drift for the accurate seastabilization pictures.

The SC-50 consists of Antenna Unit, Display Unit andProcessor Unit. The stylish radome antennaaccommodates three GPS antennas. The tri-antennasystem helps reduce the influence of vessels� motionsmore than dual-antenna system.

Furuno’s advanced GPS technology ensuresdata for AIS, ECDIS, Radar/ARPA and more.

Compass Rose Mode

■ Provides highly accurate heading datafor autopilot, radar, AIS, Sonar andplotting systems

■ IMO MSC.116(73) type approved as averified THD (Transmitting HeadingDevice)

■ Rapid 45°/s follow-up rate greatlyexceeds IMO High Speed Craftrequirements 20°/s

■ High accurate GPS, WAAS Data - SOG,COG, ROT, and L/L

■ Precision Pitch/Roll Data in Analog andDigital formats for vessel stabilizers,sonar, etc..

■ Multiple High Speed Heading DataOutput in IEC 61162-1/2 (NMEA0183/HS)

■ High Contrast 4.5" Silver Bright LCD ■ 100% free of yearly or regular

maintenance - No Recurring Costs■ Unique Tri-Antenna System improves

system accuracy and reduces theeffects of yaw, pitch and roll

Processor Unit

Heading

Antenna A1

Antenna A2

Antenna A3

Difference between the�range from satellite to�antenna 1 and the range�to antenna 2.

Fore-

and-

aft li

ne

Vecto

r tode

cide he

ading

North

Principle

s highly accurate heading

With the SC-50, a ship's heading is determined by decodingthe phase data in the GPS carrier frequency. In principle, a pair of antennas A1(ref) and A2(fore), eachconnected with an associated GPS engine and processor, areinstalled along the ship's fore-aft line. The GPS systems at A1and A2 calculate the range and azimuth to the satellite.

The difference in range between A1 and A2 is ∆λ + nλ where λis 19 cm and n* is automatically found during the initialization stage. A fraction of a carrier wavelength, ∆λ, isprocessed by Furuno's advanced kinematic technology ingeographical survey, thus determining a vector (range andorientation) A1 to A2, i.e., heading of ship relative to north.

In reality, the third antenna is added to reduce the influence ofpitch, roll and yaw, and five satellites are used to process 3Ddata (by 3rd sat), to reduce clock derived error (by 4th sat),and to calculate n in initial stage (by 5th sat).

If the GPS signal is blocked by a tall building or under abridge, the 3-axis vibrating-gyro rate sensors in the processor unit take the place of the satellite until all five satellites are in view. The rate sensors also contribute toregulating the heading data against pitch, roll and yawtogether with the third antenna (A3 in the illustration).

*Ambiguity "n" is resolved by LAMBDA algorithm developed by Prof.Teussen, Delft University of Technology, The Netherlands.

Heading Mode ROT Mode

Set & Drift Mode

Steering Mode

(Current (Set and Drift) and Distance Run is selectable.)

NAV Data Mode

240 9.5"

1606.3"

622.4"

160

6.3

"

100 3.9"

1505.9"

650

25.

6"

240

9.5

"

4-M10

1. AccuracyHeading ±1.0° (95% static accuracy)

(IMO THD MSC.116(73) static accuracy: ±1.0° x secant Lat.)

GPS Fix 10 m (95%)DGPS Fix 5 m (95%)WAAS Fix 3 m (95%)

2. Follow-up 45°/s rate-of-turn3. Settling time 3 min4. Interface

Number of ports10 ports* 5 ports in AD-10 or

10 ports in IEC 61162-1/-2* can be utilized in menu selection

1 port AD-10 onlySerial data sentence

25, 100, 200 ms, 1, 2 s data rate: HDT, HDM(Heading), ROT(Rate of turn)ATT(Pitch and Roll)

1, 2 s data rate: VHW(Heading), VTG, VBW(SOG), GGA, GLL, GNS(L/L), ZDA(UTC), VDR( Set and Drift)

Log Output 1 port: 200/400 p/nm (closure)Alarm Output 1 port: Alarm signal (closure signal)Heading Input 1 port: Backup Heading

(AD-10/IEC 61162-1)HDT, HDG, HDM, VBW, VHW, VLW

DGPS Input 1 port: RTCM SC-104 format5. Receiver Type Twelve discrete channels.

C/A code, all-in-view6. Receive Freq L1 (1575.42 MHz)7. Display Unit Monochrome LCD, 4.5" diagonal

95 (W) x 60 (H)mm, 120 x 64 pixels8. Display Mode Steering, Nav Data, Compass Rose,

ROT, Heading and Set and Drift modes

POWER SUPPLY 12-24 VDC, 15 W

ENVIRONMENTALIEC 60945 for EMC, Vibration, Temperature

EQUIPMENT LISTStandard1. Display Unit SC-502 1 unit2. Antenna Unit SC-303 with 15 m cable 1 unit3. Processor Unit SC-501 1 unitOption1. Antenna Cable, 30 m CP20-01700, 50 m CP20-017102. Flush Mount Kit S type CP20-17, F type CP20-29

04032/5KS Printed in JapanFURUNO U.S.A., INC.Camas, Washington, U.S.A.Phone: +1 360-834-9300 Telefax: +1 360-834-9400

FURUNO (UK) LIMITEDDenmead, Hampshire, U.K.Phone: +44 2392-230303 Telefax: +44 2392-230101

FURUNO FRANCE S.A.Bordeaux-Mérignac, FrancePhone: +33 5 56 13 48 00 Telefax: +33 5 56 13 48 01

FURUNO ESPANA S.A.Madrid, SpainPhone: +34 91-725-90-88 Telefax: +34 91-725-98-97

FURUNO DANMARK ASHvidovre, DenmarkPhone: +45 36 77 45 00 Telefax: +45 36 77 45 01

FURUNO NORGE A/SÅlesund, NorwayPhone: +47 70 102950 Telefax: +47 70 127021

FURUNO SVERIGE ABVästra Frölunda, SwedenPhone: +46 31-7098940 Telefax: +46 31-497093

FURUNO FINLAND OYEspoo, FinlandPhone: +358 9 4355 670 Telefax: +358 9 4355 6710

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

SPECIFICATIONS OF SC-50

209 8.2"175 6.9"

85 3.4"78 3.1"15 0.6"

145 5.5" 32 1.3"

100

3.9

"

125

4.9

"

4- 6

70 2.8"

215 8.5"

205 8.1"

130

5.1

"

15 0.8"

12 0.5"max

50 2

.0"

70 2

.8"

68 2.7"17 0.7"61 2.4"

Cutout for flush mount

92 3

.6"

167 6.6"

63 2.5"

4- 5.5

4- 5.5187 7.4"

112

4.4

"

Cutout for flush mount

183 7.2"

92 3

.6"

210

8.3

"

308

12.

1"29

0 1

1.4"

31.5

1.2"

350 13.8"330 13.0"

310 12.2" 68 2.7"

Processor Unit

Antenna UnitSC-303

Display Unit0.55 kg 1.2 lb

4.2 kg 9.3 lb

4.2 kg 9.3 lb

12-24 VDC

Antenna Unit Display Unit

Processor Unit

DGPS Beacon ReceiverGR-80

RadarAutopilot (HCS/TCS)VideoPlotterCurrent IndicatorScanning SonarECDISAIS

Current IndicatorScanning Sonar

Pitch/RollAnalog

Speed alarm/Heading alarm(Contact)

MJ-7

Option or local supply

Heading (Backup)/STW

15/30/50 m

IEC 611162-1/-2 or AD-10SC-501

SC-502SC-303

10 m

IEC 611162-1/-2 or AD-10AD-10

IEC 611162-1/-2 or AD-10

IEC 611162-1/-2 or AD-10IEC 611162-1/-2 or AD-10

CompassRose*

Repeater Interface*for synchro orstep by step

* For further info, contact our depot

TNC-PS-3D-15 x3 orTPPX6-3D2V-15M x1

Interconnection Diagram

Flush Mount Kit F type

Flush Mount Kit S type

Catalogue No. N-858

R

R

TRADE MARK REGISTERED

MARCA REGISTRADA

Revolutionary heading sensor

SATELLITE COMPASSModel SC-110

The future today with FURUNO's electronics technology.

FURUNO ELECTRIC CO., LTD.9-52 Ashihara-cho, Nishinomiya City, Japan Phone: +81 (0)798 65-2111

Fax: +81 (0)798 65-4200, 66-4622 URL: www.furuno.co.jp

With the SC-50, a ship's heading is determined bydecoding the phase data in the GPS carrier frequency.In principle, a pair of antennas A1(ref) and A2(fore),each connected with anassociated GPS engine andprocessor, are installed along theship's fore-aft line. The GPSsystems at A1 and A2 calculatethe range and azimuth to thesatellite.

The difference in range betweenA1 and A2 is ∆λ + nλ where λ is19 cm and n* is automaticallyfound during the initializationstage. A fraction of a carrierwavelength, ∆λ, is processed byFuruno's advanced kinematictechnology in geographicalsurvey, thus determining a vector(range and orientation) A1 to A2,i.e., heading of ship relative tonorth.

In reality, the third antenna is added to reduce theinfluence of pitch, roll and yaw, and five satellites areused to process 3D data (by 3rd sat), to reduce clock

derived error (by 4th sat), andto calculate n in initial stage (by5th sat).

If GPS signal is blocked by atall building or under a bridge,the 3-axis vibrating-gyro ratesensors in the processor unittake the place of the satelliteuntil all five satellites are inview. The rate sensors alsocontribute to regulating theheading data against pitch, rolland yaw together with the third antenna (A3 in theillustration).

*Ambiguity "n" is resolved byLAMBDA algorithm developed byProf. Teussen, Delft University ofTechnology, The Netherlands.

Heading

θ

Antenna A1

Antenna A2

Antenna A3

Difference between the�range from satellite to�antenna 1 and the range�to antenna 2.

∆λ

λ

Fore-

aft li

ne

Vecto

r tode

cide he

ading

North

Principle

Furuno’s high-grade satellite compasswith its superior heading accuracy for AIS, ECDIS, RADAR

Compass Rose Mode

■ Heading information for ARPA, AIS,ECDIS, Scanning Sonar, Autopilot

■ Heading accuracy ±0.6° exceedingIMO MSC.116(73) as a THD(Transmitting Heading Device)

■ SOG, COG, ROT, pitch and roll

■ Excellent follow-up rate of 45°/sexceeding requirements of highspeed craft (20°/s)

■ High speed heading data output inIEC 61162-2 format

■ Clear 4.5" silver bright LCD showingmimic compass rose with digitalreadouts

■ Analog and digital data output forpitch and roll for ship’s motioncorrection

12-24 VDC

Antenna Unit Display Unit

Processor Unit

DGPS Beacon ReceiverGR-80

RadarECDISAISAutopilot (HCS/TCS)VideoPlotterCurrent IndicatorScanning Sonar

Current IndicatorScanning Sonar

Pitch/RollAnalog

Speed alarm/Heading alarm(Contact)

MJ-7

Option or local supply

Heading (Backup)/STW

15/30/50 m

IEC 611162-1/-2/AD-10

SC-1101

SC-502SC-1203F

10 m

IEC 611162-1/-2/AD-10

AD-10

IEC 611162-1/-2/AD-10

IEC 611162-1/-2/AD-10IEC 611162-1/-2/AD-10

CompassRose*

Repeater Interface*AMI-GFV "KW-941" etc.for synchroAMI-GFV "KW-903-SX" etc. for step by step

* For further info, contact our depot

InterconnectionDiagram

The SC-110 is an enhanced GPS-based compassdesigned for onboard equipment requiring a headingsignal, such as ARPA, AIS, ECDIS, Scanning Sonar,Autopilot, etc. This equipment also provides all thenecessary functions the latest GPS navigators do.Fallback arrangement by 3-axis vibrating-gyro ratesensor provides accurate and constant headinginformation even when the satellite signals are blockedunder bridges or reduced by tall buildings. The SC-110also regulates the compass function when the ship issubject to pitching, rolling and yawing. The performanceis not affected by ships’ speed, latitude, geomagnetism,etc. Settling time is almost instant and follow-upperformance is excellent, achieving 45°/s (SOLAS HSCCode requires 20°/s as a minimum).In addition to the heading information and positionaldata, SOG (speed over ground), COG (course overground) and ROT (rate of turn) are displayed. SOG isremarkably accurate by decoding the Doppler shift in thereceived satellite signals. The interface delivers trueheading and course/speed over ground, rate of turn aswell as GPS fix through up to 11 ports. The heading

information is put out in IEC 61162-2 format at a highupdate rate of 25ms to satisfy the high speed data-outputrequired in the special applications.The roll and pitch angle is also output both in analog anddigital formats to the equipment, such as sonar,sounders etc. It is useful in offering the stable echopictures by compensating the transmitted/receivedbeams even in the rough seas. Thus, the SC-110 can beused as a highly accurate motion sensor.The SC-110 has a unique Set and Drift mode. Whenconnected with a water-tracking speed-log, such as DS-80, it calculates set and drift (tide direction and speed) inthe mode. The display helps a radar operator to manuallyenter set and drift for accurate sea stabilization pictures.The SC-110 consists of 3 antennas on a solid precisionsupport, a processor unit, and a display unit. The tri-antenna system helps reduce the influence of ships’motions. There are no mechanical parts such as gimbalsand rotating meters, thus the compass is free fromregular maintenance.

(Current (Set and Drift) and Distance Run is selectable.)

Heading ModeROT Mode

Set & Drift ModeSteering Mode

NAV Data Mode

1. AccuracyHeading: ±0.6° (95 % static accuracy)

(IMO THD MSC.116(73) static accuracy: ±1.0° x secant Lat.)

GPS: 10 m (95 %)DGPS: 5 m (95 %)

2. Follow-up 25°/s rate-of-turn3. Settling time 4 min4. Interface

Number of ports10 ports* 5 ports in AD-10 or

10 ports in IEC 61162-1/-2* Number of ports is changed by system configuration.

1 port AD-10 onlySerial data sentence

25/100/200 ms, 1s data rate: HDT, HDM(Heading), Patt(Pitch, Roll and Yaw), ROT(Rate of turn)

1/2 s data rate: VHW(Heading), VTG, VBW(SOG), GGA, GLL, GNS(L/L), ZDA(UTC), GSA, GSV

Log Output 1 port: 200/400 p/nm (closure)Alarm Output 1 port: Alarm signal (closure signal)Heading Input 1 port: Backup Heading

(AD-10/IEC 61162-1/-2)HDT, HDG, HDM, VBW, VHW, VLW

DGPS Input 1 port: RTCM SC-104 format5. Receiver Type Twelve discrete channels.

C/A code, all-in-view6. Receive Freq L1 (1575.42 MHz)7. Display Unit 4.5" diagonal 95 (W) x 60 (H)mm,

120 x 64 pixels8. Display Mode Steering, Nav Data, Set and Drift,

Compass Rose, ROT, HeadingPOWER SUPPLY 12-24 VDC, 15 WENVIRONMENTALIEC 60945 for EMC, Vibration, TemperatureEQUIPMENT LISTStandard1. Display Unit SC-502 1 unit2. Antenna Unit with 15 m cable SC-1203F 1 unit3. Processor Unit SC-1101 1 unit4. Standard Spare Parts, Installation Materials 1 setOptional1. Antenna Cable, 15 m 20S0336-1, 30 m CP20-01700,

50 m CP20-017102. Flush Mount Kit S type CP20-17, F type CP20-293. Repeater Interface for synchro or step by step

02085Y Printed in JapanFURUNO U.S.A., INC.Camas, Washington, U.S.A.Phone: +1 360-834-9300 Telefax: +1 360-834-9400

FURUNO (UK) LIMITEDDenmead, Hampshire, U.K.Phone: +44 2392-230303 Telefax: +44 2392-230101

FURUNO FRANCE S.A.Bordeaux-Mérignac, FrancePhone: +33 5 56 13 48 00 Telefax: +33 5 56 13 48 01

FURUNO ESPANA S.A.Madrid, SpainPhone: +34 91-725-90-88 Telefax: +34 91-725-98-97

FURUNO DANMARK ASHvidovre, DenmarkPhone: +45 36 77 45 00 Telefax: +45 36 77 45 01

FURUNO NORGE A/SÅlesund, NorwayPhone: +47 70 102950 Telefax: +47 70 127021

FURUNO SVERIGE ABVästra Frölunda, SwedenPhone: +46 31-7098940 Telefax: +46 31-497093

FURUNO SUOMI OYHelsinki, FinlandPhone: +358 9 341 7570 Telefax: +358 9 341 75716

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

SPECIFICATIONS OF SC-110

209 8.2"

175 6.9"

85 3.4"

78 3.1"15 0.6"

140 5.5" 32 1.3"

100

3.9

"

125

4.9

"

4- 6

Processor Unit

Antenna Unit

315 12.4"

200

7.9

"

265

10.

4"10

0�3.

9"

103�

4.1"

30�

1.2"

335 13.2"355 14.0"

4 - 6

( 994)

860.8 33.9"(1016 40")

(901

35.

3")

( 1150)

172 6.8"

115 4.5"Display Unit 0.6 kg 1.3 lb

6.8 kg 15.0 lb

3.6 kg 7.9 lb

RMarine

Satellite Compass

Features:

• no maintenance• compliant with IMO requirements for THD• high accuracy 0.5 deg (RMS)• short start-up time 5 min• fast follow up rate 25 deg/sec• can be combinated with Anschütz

gyro compasses • compatible to all Raytheon / Anschütz systems• new Novatel GPS antenna technology • watertight display optional • easy to install

The new Satellite Compass Standard 21 GPS isstabilised by turn-rate gyros, any short-terminterruption or shadowing of GPS is bridged byinertial means.Satellite Compass 21 GPS block diagram

Processing Unit10-36 V DC2 x serial outputAnschütz course busor NMEA 0183

CANopen maritime

Standard 21 GPS

Processing Unit

HeadingRollPositionSpeed

Operator Unit

The new Anschütz Satellite Compass

uses GPS signals to produce ship's headinginformation. It can be used as a compass sensorfor repeaters, radars, electronic chart systems,AIS, scanning sonars, and TV-antennas.

1120(44.10)

300

(11.

81)

396

(15.

59)

136

(5.35)

1000(39.37)

ø 45-ø 70(1.77-2.76)

Fore Aft

GPS Receiver Antenna

Connection Box

Dimensions in mm (inch)

Subject to alteration due to technical developments without notice.

Technical Data

All rights reserved · Printed in Germany

RM 801.89 e / L&S 0401

RMarineRaytheon Marine GmbHHigh Seas ProductsD-24100 KielGermanyTel +49(0)4 31-30 19-0Fax +49(0)4 31-30 19-291Email [email protected]

accuracy: 0.5 deg (RMS)

angular resolution: 0.1 deg

startup time: 5 min

Interfaces: 2 x CANopen maritime

2 x serial (Anschütz course bus

or NMEA 0183)

power: 10 - 36 V DC

enclosure: operator unit IP 23 (optional IP 56)

antenna unit IP 56

processing unit IP 23

components: 1 operator unit

1 antenna unit

1 processing unit

1 antenna cable 30 m

1 connection cable

1 power cable

1 manual

options: 1 wall mounting bracket for

operator unit (IP 56)

display modes: digital heading

tape repeater (analog heading)

roll and pitch

SOG and COG

position (lat / lon)

satellite sky plot

192(7.56)

96(3

.78)

Operator Unit

100(3.94)

307(12.09)

152(5.98)

252

(9.9

2)

Operator Unit

Processing Unit

Antenna Unit

KGC-1• Highly accurate heading information

readily available• Stable and fast follow-up capability

for rapid rate of turn• Maintenance free

GPS Compass

FEATURES• The 1˚ rms heading accuracy has been achieved based on KODEN’s unique phase measurement technique.• Fast start-up! Heading information is available in approximately 2 minutes after the unit is turned on.• In addition to the heading information, the unit provides own position and speed information.• Unlike the conventional gyrocompass, no routine check or maintenance are necessary.

OKGC1-00 04 XIII SI 5Y1PRINTED IN JAPAN

DIMENSIONS AND WEIGHT

SPECIFICATIONSStandard equipment

EQUIPMENT LIST

CONNECTIONS

* Specifications subject to change without notice.

OVERSEAS DEPT.13-24, TAMAGAWA 2-CHOME, OTA-KUTOKYO, 146-0095 JAPANTEL : +81 3 3756-6918FAX: +81 3 3756-6831E-MAIL: [email protected]

www.koden-electronics.co.jp

KODEN ELECTRONICS CO., LTD.

FOR DETAILS, PLEASE CONTACT:

Certified to ISO 9001 ( )

Safety precaution

To ensure proper and safe use of the equipment,please carefully read and follow the instructions inthe OPERATION MANUAL.

Receiving frequency 1575.42 MHz ± 1 MHzReceiving channel Parallel 9 ChannelSensitivity Better than -130 dBmSetting time 2min (at standard hot-start time)Heading accuracy 1˚ rmsHeading resolution 0.1˚Rate of turn Less than 25˚/sFollow-up acceleration Less than 1 gPitch / roll angle Less than 30˚Base line length 0.5 mTime to Cold start 50 sec (standard)position fix Warm start 45 sec (standard)

Hot start 20 sec (standard)Positioning accuracy Position GPS: 15 m (2 drms, SA=OFF, PDOP 3)

Velocity 1 m / sec (rms, SA=OFF, PDOP 3)Datum 86 system (WGS-84,Tokyo etc.)Output data level RS-422Output data port Heading data output: 2 (50 ms to 1 s)

Navigation data output: 2 (1 s)Output data format NMEA0183Ver.2.0/IEC61162-1Output data sentence HDT, ROT, GGA, VTG, GLL, ZDA, GSA, GSV,

RMC, PKODA, PKODG1, PKODG7Power supply Voltage 10.8 to 31.2 VDC

Consumption Less than 8 W (at 24 VDC)Temperature GPS Antenna -25˚C to +55˚Crange Processor Unit -15˚C to +55˚CWaterproof GPS Antenna IPX6grade Processor Unit IPX0

Processor Unit KGC-1 1.2kgGPS Antenna GA-11 1.4kgDC Power cable CW-255-2M With a 3A fuse 2mAntenna cable CW-392-15M 2 pcs. per set 15mConnecting cable CW-376-5M With 6-pin waterproof connector and one end plain 5mFuse F-7161, 3A For spare 1Installation Material 1setOperation manual 1

Antenna Cable CW-393-30M 2 pcs. per set 30mCW-394.KIT 2 pcs. per set 60m

Connecting cable CW-373-5M With 6-pin waterproof connectors at both ends 5mCW-374-5M With a 6-pin connector and a 6-pin waterproof connector 5mCW-376-5M With a 6-pin waterproof connector and one end plain 5mCW-381-5M With a 38-pin connector and a 6-pin waterproof connector 5m

Connector LTWBD-06BFFA-L180 6P waterproof connector (LTW) 1Power Rectifier PS-003A With 2 spare fuses(5A) 2.8kgAC power cable VV-2D8-3M Flying leads on both ends 3m

GPS Antenna GA-11

Processor UnitKGC-1

RADAR etc.

RADAR etc.

Navigation Unit

Heading data

Heading data

Navigation data

Navigation UnitNavigation data

Power rectifier

10.8 to 31.2 VDC

100/115 VAC200/230 VAC

Thick solid lines: Standard devices and connections.Thin solid lines: Optional connections.

Option

BO

500(19 11/16)

593(23 3/8)

58(2

5/1

6)10

2(4

)

(6 11/16)

93(3

21/

32)

150

(5 2

9/32

)

184(7 1/4)

220(8 5/8)

DATAALARMPOWER

POWER DATA1 DATA3 ANT1OFF

ON

85(3

3/8

)

ANT2DATA4DATA2GNDMODE

245

(9 5

/8)

GPS Antenna GA-11

Processor Unit KGC-1

Unit: mm (inch)

Weight: 1.4kg

Weight: 1.2kg