reverse engineering: test of catia
DESCRIPTION
REVERSE ENGINEERING: TEST OF CATIA. CMS Tracker mock-up scanned with Faro Laser Scanner CMS Tracker mock-up scanned with Leica HDS 6100 Atlas calorimeter face scanned with Faro Laser Scanner Miscellaneous pieces scanned with Leica T-Scan Conclusion. REVERSE ENGINEERING: TEST OF CATIA. - PowerPoint PPT PresentationTRANSCRIPT
Christophe BAULT 19th July 2009
REVERSE ENGINEERING: TEST OF CATIA
• CMS Tracker mock-up scanned with Faro Laser Scanner
• CMS Tracker mock-up scanned with Leica HDS 6100
• Atlas calorimeter face scanned with Faro Laser Scanner
• Miscellaneous pieces scanned with Leica T-Scan
• Conclusion
Christophe BAULT 29th July 2009
REVERSE ENGINEERING: TEST OF CATIA
• CMS Tracker mock-up scanned with Faro Laser Scanner
• CMS Tracker mock-up scanned with Leica HDS 6100
• Atlas calorimeter face scanned with Faro Laser Scanner
• Miscellaneous pieces scanned with Leica T-Scan
• Conclusion
Christophe BAULT 39th July 2009
REVERSE ENGINEERING: TEST OF CATIA• CMS Tracker mock-up scanned with Faro Laser Scanner
Christophe BAULT 49th July 2009
REVERSE ENGINEERING: TEST OF CATIA• CMS Tracker mock-up scanned with Faro Laser Scanner
Christophe BAULT 59th July 2009
REVERSE ENGINEERING: TEST OF CATIA• CMS Tracker mock-up scanned with Faro Laser Scanner
Christophe BAULT 69th July 2009
REVERSE ENGINEERING: TEST OF CATIA• CMS Tracker mock-up scanned with Faro Laser Scanner
Christophe BAULT 79th July 2009
REVERSE ENGINEERING: TEST OF CATIA
• CMS Tracker mock-up scanned with Faro Laser Scanner
• CMS Tracker mock-up scanned with Leica HDS 6100
• Atlas calorimeter face scanned with Faro Laser Scanner
• Miscellaneous pieces scanned with Leica T-Scan
• Conclusion
Christophe BAULT 89th July 2009
REVERSE ENGINEERING: TEST OF CATIA• CMS Tracker mock-up scanned with Leica HDS 6100
Christophe BAULT 99th July 2009
REVERSE ENGINEERING: TEST OF CATIA• CMS Tracker mock-up scanned with Leica HDS 6100
Christophe BAULT 109th July 2009
REVERSE ENGINEERING: TEST OF CATIA
• CMS Tracker mock-up scanned with Faro Laser Scanner
• CMS Tracker mock-up scanned with Leica HDS 6100
• Atlas calorimeter face scanned with Faro Laser Scanner
• Miscellaneous pieces scanned with Leica T-Scan
• Conclusion
Christophe BAULT 119th July 2009
REVERSE ENGINEERING: TEST OF CATIA• Atlas calorimeter face scanned with Faro Laser Scanner
Scan of ATLAS calorimeter face
Christophe BAULT 129th July 2009
REVERSE ENGINEERING: TEST OF CATIA• Atlas calorimeter face scanned with Faro Laser Scanner
Cloud of point loaded on Catia (a small part)
Christophe BAULT 139th July 2009
REVERSE ENGINEERING: TEST OF CATIA• Atlas calorimeter face scanned with Faro Laser Scanner
Mesh on Catia
Christophe BAULT 149th July 2009
REVERSE ENGINEERING: TEST OF CATIA• Atlas calorimeter face scanned with Faro Laser Scanner
Mesh on Catia (Zoom)
Christophe BAULT 159th July 2009
REVERSE ENGINEERING: TEST OF CATIA• Atlas calorimeter face scanned with Faro Laser Scanner
Insertion of mesh in a Catia 3D environment
Christophe BAULT 169th July 2009
REVERSE ENGINEERING: TEST OF CATIA
• CMS Tracker mock-up scanned with Faro Laser Scanner
• CMS Tracker mock-up scanned with Leica HDS 6100
• Atlas calorimeter face scanned with Faro Laser Scanner
• Miscellaneous pieces scanned with Leica T-Scan
• Conclusion
Christophe BAULT 179th July 2009
REVERSE ENGINEERING: TEST OF CATIA• Miscellaneous pieces scanned with Leica T-Scan
Cloud of point very nice.• Just a few parasite points I’ve had removed• Lots of holes in the cloud
Christophe BAULT 189th July 2009
REVERSE ENGINEERING: TEST OF CATIA• Miscellaneous pieces scanned with Leica T-Scan
Mesh (No filter used)
Zoom: next slide
Christophe BAULT 199th July 2009
REVERSE ENGINEERING: TEST OF CATIA• Miscellaneous pieces scanned with Leica T-Scan
Very nice mesh
Christophe BAULT 209th July 2009
REVERSE ENGINEERING: TEST OF CATIA
• CMS Tracker mock-up scanned with Faro Laser Scanner
• CMS Tracker mock-up scanned with Leica HDS 6100
• Atlas calorimeter face scanned with Faro Laser Scanner
• Miscellaneous pieces scanned with Leica T-Scan
• Conclusion
Christophe BAULT 219th July 2009
REVERSE ENGINEERING: TEST OF CATIA• Conclusion:
We have tested two kinds of scanning materials:Laser trackers used for big surfaces, and installed far of
targets.All these systems create cloud of points with noise. And to have a nice surface, we need to clean and filter cloud. Filters available on Catia are very basic, and a big part of work is to delete manually parasite points. This operation takes lot of time, and the result is not marvelous.
Portable laser used for small surfaces, because of the time spent to scan. The result is a very clean cloud, but it’s necessary to follow creation of cloud on PC during the scanning to avoid forgotten areas, and have big holes. With this type of cloud, Catia is an adequate software to re-create surfaces