rev. jdv’s electric control valve...windings based on the command pulse, the motor rotates...
TRANSCRIPT
• Energy saving
• Space saving
• Shorter installation work time High function and
high performanceHigh function andhigh performance• High torque (Max. 200 N •m)
• High Resolution (1/1000)
• A battery-driven model is available as well.
(*1)
(*1)(*1)
(*1)
(*1)
(*1) Contact us for details.
Open Network SupportedOpen Network Supported
JSB Series
JDV’s
JDV CONTROL VALVES CO., LTD.M-SYSTEM CO., LTD.
Directly connected to various open networks to
save wiring efforts to agreat extent!
No time- and money-consuming air
source equipmentis required!
Electric control valve is ready to operate immediately after connecting signal and
power supply!
The electric actuator is made by M-System.
Furthermore,many more
advantages!
JSB Seriesmoney-consuming air
JSB Series
S
S
NStator
(Permanent magnet)Rotor
S
N
SStator
(Permanent magnet)Rotor
Stepping Motor
A stepping motor, also called a pulse motor, is a motor that rotates in synchronization with a command pulse signal. The principle of rotation of a simpli�ed 2-phase, 8-pole stepping motor model is shown in the �gure below.A stepping motor consists of a stator with windings and a rotor using a powerful neodymium magnet. Energizing the stator windings to generate a magnetic force is called excitation. By sequentially exciting the multiple stator windings based on the command pulse, the motor rotates stepwise, utilizing the action of attraction and repulsion between the magnetic poles of the stator and rotor. The rotation angle of a stepping motor is always determined by the constant mechanical accuracy (motor structure and machining accuracy) for each command pulse signal. Therefore, a stepping motor performs highly accurate positioning control.
A stepping motor rotates by a constant angle per pulse.
An open network is an industrial network, the speci�cations of which are made public and can be commonly used by many users and manufacturers.Open networks are roughly divided into the following two types.1. Those speci�ed by organizations and associations in consultation and recognized as official standards.2. Those developed by speci�c manufacturers and organizations and established as de facto standards as a result of promotion activities.Both types have well-organized and integrated speci�cations and are available to everyone for many purposes. Either one can connect different manufacturers’ devices (multivendor devices) and brings many bene�ts to users.Currently, many types of open networks are expanding their tempo of popularization according to the applicable �eld and country in the market.
Open Network
How to Order (Example for JSB V-port)
Guidance 1
Guidance 2
Guidance 3
Notes on Catalog: All rights are reserved. The technical data and content may be changed without prior notice.
ELECTRIC CONTROL VALVE
JTD Series
8
2019-09EC-Z203
4-3011
Rev. 001500610
JDV CONTROL VALVES CO., LTD.
Headquarters, 5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPANInternational Department & Tel: +81-(0)6-6659-8201 Fax: +81-(0)6-6659-8510Factory E-mail: [email protected]
Headquarters NO. 6-1, QINGNIAN RD., YANGMEI CITY, TAOYUAN COUNTY 326, TAIWAN
Your local Contact
Actuator Manufacturer
represen tative:
www.jdv.com.tw
www.m-system.com
Tel: +886-3-4965066 Fax: +886-3-4963526 E-mail: [email protected]
JDV
’s E
LEC
TR
IC C
ON
TR
OL
VA
LVE
JDV CONTROL VALVES CO., LTD.M-SYSTEM CO., LTD.
• Energy saving
• Space saving
• Shorter installation work time High function and
high performanceHigh function andhigh performance• High torque (Max. 200 N •m)
• High Resolution (1/1000)
• A battery-driven model is available as well.
(*1)
(*1)(*1)
(*1)
(*1)
(*1) Contact us for details.
Open Network SupportedOpen Network Supported
JSB Series
JDV’s
JDV CONTROL VALVES CO., LTD.M-SYSTEM CO., LTD.
Directly connected to various open networks to
save wiring efforts to agreat extent!
No time- and money-consuming air
source equipmentis required!
Electric control valve is ready to operate immediately after connecting signal and
power supply!
The electric actuator is made by M-System.
Furthermore,many more
advantages!
JSB Seriesmoney-consuming air
JSB Series
S
S
NStator
(Permanent magnet)Rotor
S
N
SStator
(Permanent magnet)Rotor
Stepping Motor
A stepping motor, also called a pulse motor, is a motor that rotates in synchronization with a command pulse signal. The principle of rotation of a simpli�ed 2-phase, 8-pole stepping motor model is shown in the �gure below.A stepping motor consists of a stator with windings and a rotor using a powerful neodymium magnet. Energizing the stator windings to generate a magnetic force is called excitation. By sequentially exciting the multiple stator windings based on the command pulse, the motor rotates stepwise, utilizing the action of attraction and repulsion between the magnetic poles of the stator and rotor. The rotation angle of a stepping motor is always determined by the constant mechanical accuracy (motor structure and machining accuracy) for each command pulse signal. Therefore, a stepping motor performs highly accurate positioning control.
A stepping motor rotates by a constant angle per pulse.
An open network is an industrial network, the speci�cations of which are made public and can be commonly used by many users and manufacturers.Open networks are roughly divided into the following two types.1. Those speci�ed by organizations and associations in consultation and recognized as official standards.2. Those developed by speci�c manufacturers and organizations and established as de facto standards as a result of promotion activities.Both types have well-organized and integrated speci�cations and are available to everyone for many purposes. Either one can connect different manufacturers’ devices (multivendor devices) and brings many bene�ts to users.Currently, many types of open networks are expanding their tempo of popularization according to the applicable �eld and country in the market.
Open Network
How to Order (Example for JSB V-port)
Guidance 1
Guidance 2
Guidance 3
Notes on Catalog: All rights are reserved. The technical data and content may be changed without prior notice.
ELECTRIC CONTROL VALVE
JTD Series
8
2019-09EC-Z203
4-3011
Rev. 001500610
JDV CONTROL VALVES CO., LTD.
Headquarters, 5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPANInternational Department & Tel: +81-(0)6-6659-8201 Fax: +81-(0)6-6659-8510Factory E-mail: [email protected]
Headquarters NO. 6-1, QINGNIAN RD., YANGMEI CITY, TAOYUAN COUNTY 326, TAIWAN
Your local Contact
Actuator Manufacturer
represen tative:
www.jdv.com.tw
www.m-system.com
Tel: +886-3-4965066 Fax: +886-3-4963526 E-mail: [email protected]
JDV
’s E
LEC
TR
IC C
ON
TR
OL
VA
LVE
JDV CONTROL VALVES CO., LTD.M-SYSTEM CO., LTD.
The electric control valve fully demonstrates its functions
PLC
ABC12CPU
PULL
POWER
PULL
MODERUNERR
READYBAT
STOP
The electric control valve connects to various open networks directly.
(*2)
(*2)(*2)(*2)
(*2)
A number of electric control valves with open network capability connect in a
daisy-chain layout, which saves wiring effort.Various operating information on electric control valves can be collected through a single network.
M-System’s electric actuator MRP Series
• Opening position feedback• Opening position input error• Motor lock alarm• Maintenance information
(Motor activation count and
integrated operation distance)• Others
Electric control valve PLC
• Opening position setting• Forced opening and closing• Alarm reset• Maintenance information and
reset• Others
PLC Electric control valve
PP
I/P
Incidental equipment
Pressurereducing valve with filter
Pressurereducing valve with filter
Stop valve Stop valve
I/P positioner
Drain
Control signal
(high or low voltage)Power source
20-100 kPa
Compressor
Air Dryer
4-20 mA DC
Air header
PNEUMATIC
The pneumatic control valve requires
complicated equipment and consumes plenty of power.
Pneumatic positionerPneumatic positioner
Pneumatic control valve
Replace the existing pneumatic valve with an electric valve.
A compressor entails equipment costs as well as troublesome
maintenance work!What is more, it resultsin high electricity bills!
(*2) For open networks, refer to Guidance 2 on page 8 .
2
by simply connecting signal and power supply!
The stepping motor is adopted for the drive block.
Output Stem Stem for manual operation
ELECTRICControl signal
Power source
4-20 mA DC or Open network
No incidental equipment
The electric control valve does not require
incidental equipment, and consumes less power.
Equipment
cost ↓1/5 (*3)
Energy consumption ↓1/10 (*3)!
Only standby power (*4)
is consumed when the
control loop is in
a steady state.
Electric control valve
(*4) Maximum power consumption: 180 VA Standby power: 18 VA
(*3) The data surveyed by M-System.
The data is provided on the condition that M-System’s PRP Electric Actuator is used.
Then you can eliminate incidental equipment.
The stepping motor has high torque and a resolution of 1/1000.
Battery for fail-safe operation is optional.
Digital control unit
FeaturesInstant zero/span positionsetupFlexible opening/closingspeed settingsOpening position outputLock alarm output
Power outage emergency battery
Customers can choose models provided with a battery as well as functions of emergency actions (i.e., Full Closed, Full Open, Hold Position or Target Value) in times of loss of power. Stepping Motor
High torque 200 N •mHigh resolution 1/1000
M-System’s electric actuator PRP Series
(*5)(*5)
(*5) Refer to Guidance 1 on page 8 .
3
The electric control valve is of a simple structure and compact, and it ensures high performance.
Valve Body
PRP SeriesM-System’s electric actuator
Yoke
JTD Series
57
435
144
φ21
5.9
171 141
φ15
8.8
φ14
1.5
194
404
134
171 141
φ10
0
φ15
8
φ11
3
(Diameter: 100 mm) (Diameter: 150 mm)
(unit: mm)
We are ready to prepare several kinds of valve sizes and materials.(*6)
Please contact us for details.
The electric control valve has a very simplestructure compared to the pneumatic control valve.
The electric actuator section is small, which makes it possible to narrow the distance between pipes.
After installation, the electric control valve will be operational by just providing power
supply and connecting signal input (or connecting a network).
The accurate and stable control with The accurate and stable control with JDV’s Electric Control Valves ensures the reliable and profitable operation of your plant.ensures the reliable and profitable operation of your plant.
JSB Series V-Port Segment Control Valve
2540506580
100125150200
2540506580
100125132200
102114124140(*7)
165194254(*7)
229243
108134142151164193215232279
708492
101112134154171198
2.50 3.754.805.519.11
14.8525.9028.2245.20
1”1-1/2”2”2-1/2”3”4”5”6”8”
DIMENSIONS FOR WAFER TYPE (JSB-W1) Unit : mmSize L H1 H2 Wt (Kg)φA1
2540506580
100125150200
2540506580
100125132200
127165178190203229254267292
108134142151164193215232279
708492
101112134154171198
3.75.87.5
11.812.823.031.538.062.5
1”1-1/2”2”2-1/2”3”4”5”6”8”
DIMENSIONS FOR FLANGED TYPE (JSB-A1 SERIES JIS-10K) Unit : mmSize L H1 H2 Wt (Kg)φA1
Wafer Type Flanged Type
H1
L
H2
φA
1
H1
L
H2
φA
1
SegmentV-notch designoptimizing the �owcharacteristicsand providinga shearing function.
Inherent Flow Characteristics
Cv Values
0.010.020.040.060.100.150.230.38
0.521.061.682.794.546.57
10.2016.70
1.663.355.308.80
14.3020.7032.1052.70
3.446.95
11.0010.2329.6743.0066.64
109.30
5.8711.8518.7531.1050.6273.30
113.70186.50
9.1118.3829.1040.2678.50
113.70176.40289.50
13.3626.9642.6770.78
115.20166.80258.70424.54
18.8338.0060.1299.74
162.30235.00360.60598.20
27.5455.5587.90
145.86237.40343.70533.00874.80
40.5081.70
129.30214.50349.10505.50784.00
1286.50
Size10
Opening (%)20 30 40 50 60 70 80 90 100
1”1-1/2”2”2-1/2”3”4”5”6”
Opening (%)
Cv
(%)
100
90
80
70
60
50
40
30
20
10
00 10 20 30 40 50 60 70 80 90 100
JSB Series
(*6) Refer to Guidance 3 on page 8 .
(*7) Not in ISA standard
4 5
Application of JDV’s Electric Control ValvePetrochemical
Petroleum Refinery
Pulp and Paper Mills
Steel Industry
Mining
Gas Industry
Chemical
Power Plant
Food Industry
Water Purification Plants
The accurate and stable control with JDV’s Electric Control Valves The accurate and stable control with JDV’s Electric Control Valves ensures the reliable and profitable operation of your plant.ensures the reliable and profitable operation of your plant.
JTD Series Double Offset Butter�y Valve
6580
100125150200250300350
484854575764718192
74.688.9
114.3130.0158.8209.6254.0304.8343.0
168158190203208235295325399
181818182325364050
5.05.88.2
10.613.422.036.053.069.0
2-1/2” 3” 4” 5” 6” 8”10”12”14”
DIMENSIONS FOR WAFER TYPE 150LB (300LB also available) Unit : mmSize φD2
59.073.195.6
111.4141.5188.0235.9281.5314.3
φD1 H1116109122132144181211246286
H2 H3 Wt (Kg)L6580
100125150200250300350
484854575764718192
74.688.9
114.3130.0158.8209.6254.0304.8343.0
168158190203208235295325399
181818182325364050
6.57.8
12.014.018.029.048.073.0
120.0
2-1/2” 3” 4” 5” 6” 8”10”12”14”
DIMENSIONS FOR LUG TYPE 150LB (300LB also available) Unit : mmSize φD2
59.073.195.6
111.4141.5188.0235.9281.5314.3
φD1 H1116109122132144181211246286
H2 H3 Wt (Kg)L
Wafer Type Lug Type
Disc centerline
Ste
m c
ente
rline
2nd Offset
1st Offset
Pipe centerline
Pip
e ce
nter
line
φ
D1
φD
2
L
H2
H1
H3
φ
D1
φD
2
L
H2
H1
H3
Inherent Flow Characteristics
Cv Values
The Double Offset Geometry
1st OffsetThe centerline of the stem is moved behind the seat axis, in order to offer an optimum sealing contact.
2nd OffsetThe centerline of the disc is offset from the centerline of the valve body, allowing the disc seal to move away freely during the opening.
48
213355
108163260290
6580
100125150200250300350
613335288
172260416465
11245792
155301455728815
163482
131221430650
10401160
2247
115183309602910
14561625
2655
135216365710
107317161915
4289
217347586
1140172327563074
60126308491829
1613243839004350
74155377603
10171978299047845336
80168410655
11052150325052005800
Size10
Opening (%)20 30 40 50 60 70 80 90 100
2-1/2” 3” 4” 5” 6” 8”10”12”14”
Opening (%)
Max
imum
Cv
(%)
100
90
80
70
60
50
40
30
20
10
00 10 20 30 40 50 60 70 80 90 100
6 7
The accurate and stable control with JDV’s Electric Control Valves The accurate and stable control with JDV’s Electric Control Valves ensures the reliable and profitable operation of your plant.ensures the reliable and profitable operation of your plant.
JSB Series V-Port Segment Control Valve JTD Series Double Offset Butter�y Valve
2540506580
100125150200
2540506580
100125132200
102114124140(*7)
165194254(*7)
229243
108134142151164193215232279
708492
101112134154171198
2.50 3.754.805.519.11
14.8525.9028.2245.20
1”1-1/2”2”2-1/2”3”4”5”6”8”
DIMENSIONS FOR WAFER TYPE (JSB-W1) Unit : mmSize L H1 H2 Wt (Kg)φA1
2540506580
100125150200
2540506580
100125132200
127165178190203229254267292
108134142151164193215232279
708492
101112134154171198
3.75.87.5
11.812.823.031.538.062.5
1”1-1/2”2”2-1/2”3”4”5”6”8”
DIMENSIONS FOR FLANGED TYPE (JSB-A1 SERIES JIS-10K) Unit : mmSize L H1 H2 Wt (Kg)φA1
6580
100125150200250300350
484854575764718192
74.688.9
114.3130.0158.8209.6254.0304.8343.0
168158190203208235295325399
181818182325364050
5.05.88.2
10.613.422.036.053.069.0
2-1/2” 3” 4” 5” 6” 8”10”12”14”
DIMENSIONS FOR WAFER TYPE 150LB (300LB also available) Unit : mmSize φD2
59.073.195.6
111.4141.5188.0235.9281.5314.3
φD1 H1116109122132144181211246286
H2 H3 Wt (Kg)L6580
100125150200250300350
484854575764718192
74.688.9
114.3130.0158.8209.6254.0304.8343.0
168158190203208235295325399
181818182325364050
6.57.8
12.014.018.029.048.073.0
120.0
2-1/2” 3” 4” 5” 6” 8”10”12”14”
DIMENSIONS FOR LUG TYPE 150LB (300LB also available) Unit : mmSize φD2
59.073.195.6
111.4141.5188.0235.9281.5314.3
φD1 H1116109122132144181211246286
H2 H3 Wt (Kg)L
Wafer Type Flanged Type Wafer Type Lug Type
Disc centerline
Ste
m c
ente
rline
2nd Offset
1st Offset
Pipe centerline
Pip
e ce
nter
line
φ
D1
φD
2
L
H2
H1
H3
φ
D1
φD
2
L
H2
H1
H3
H1
L
H2
φA
1
H1
L
H2
φA
1
SegmentV-notch designoptimizing the �owcharacteristicsand providinga shearing function.
Inherent Flow Characteristics
Cv Values
Inherent Flow Characteristics
Cv Values
The Double Offset Geometry
1st OffsetThe centerline of the stem is moved behind the seat axis, in order to offer an optimum sealing contact.
2nd OffsetThe centerline of the disc is offset from the centerline of the valve body, allowing the disc seal to move away freely during the opening.
0.010.020.040.060.100.150.230.38
0.521.061.682.794.546.57
10.2016.70
1.663.355.308.80
14.3020.7032.1052.70
3.446.95
11.0010.2329.6743.0066.64
109.30
5.8711.8518.7531.1050.6273.30
113.70186.50
9.1118.3829.1040.2678.50
113.70176.40289.50
13.3626.9642.6770.78
115.20166.80258.70424.54
18.8338.0060.1299.74
162.30235.00360.60598.20
27.5455.5587.90
145.86237.40343.70533.00874.80
40.5081.70
129.30214.50349.10505.50784.00
1286.50
Size10
Opening (%)20 30 40 50 60 70 80 90 100
1”1-1/2”2”2-1/2”3”4”5”6”
48
213355
108163260290
6580
100125150200250300350
613335288
172260416465
11245792
155301455728815
163482
131221430650
10401160
2247
115183309602910
14561625
2655
135216365710
107317161915
4289
217347586
1140172327563074
60126308491829
1613243839004350
74155377603
10171978299047845336
80168410655
11052150325052005800
Size10
Opening (%)20 30 40 50 60 70 80 90 100
2-1/2” 3” 4” 5” 6” 8”10”12”14”
Opening (%)
Cv
(%)
100
90
80
70
60
50
40
30
20
10
00 10 20 30 40 50 60 70 80 90 100
Opening (%)
Max
imum
Cv
(%)
100
90
80
70
60
50
40
30
20
10
00 10 20 30 40 50 60 70 80 90 100
(*7) Not in ISA standard
5 6
The accurate and stable control with JDV’s Electric Control Valves The accurate and stable control with JDV’s Electric Control Valves ensures the reliable and profitable operation of your plant.ensures the reliable and profitable operation of your plant.
JSB Series V-Port Segment Control Valve JTD Series Double Offset Butter�y Valve
2540506580
100125150200
2540506580
100125132200
102114124140(*7)
165194254(*7)
229243
108134142151164193215232279
708492
101112134154171198
2.50 3.754.805.519.11
14.8525.9028.2245.20
1”1-1/2”2”2-1/2”3”4”5”6”8”
DIMENSIONS FOR WAFER TYPE (JSB-W1) Unit : mmSize L H1 H2 Wt (Kg)φA1
2540506580
100125150200
2540506580
100125132200
127165178190203229254267292
108134142151164193215232279
708492
101112134154171198
3.75.87.5
11.812.823.031.538.062.5
1”1-1/2”2”2-1/2”3”4”5”6”8”
DIMENSIONS FOR FLANGED TYPE (JSB-A1 SERIES JIS-10K) Unit : mmSize L H1 H2 Wt (Kg)φA1
6580
100125150200250300350
484854575764718192
74.688.9
114.3130.0158.8209.6254.0304.8343.0
168158190203208235295325399
181818182325364050
5.05.88.2
10.613.422.036.053.069.0
2-1/2” 3” 4” 5” 6” 8”10”12”14”
DIMENSIONS FOR WAFER TYPE 150LB (300LB also available) Unit : mmSize φD2
59.073.195.6
111.4141.5188.0235.9281.5314.3
φD1 H1116109122132144181211246286
H2 H3 Wt (Kg)L6580
100125150200250300350
484854575764718192
74.688.9
114.3130.0158.8209.6254.0304.8343.0
168158190203208235295325399
181818182325364050
6.57.8
12.014.018.029.048.073.0
120.0
2-1/2” 3” 4” 5” 6” 8”10”12”14”
DIMENSIONS FOR LUG TYPE 150LB (300LB also available) Unit : mmSize φD2
59.073.195.6
111.4141.5188.0235.9281.5314.3
φD1 H1116109122132144181211246286
H2 H3 Wt (Kg)L
Wafer Type Flanged Type Wafer Type Lug Type
Disc centerline
Ste
m c
ente
rline
2nd Offset
1st Offset
Pipe centerline
Pip
e ce
nter
line
φ
D1
φD
2
L
H2
H1
H3
φ
D1
φD
2
L
H2
H1
H3
H1
L
H2
φA
1
H1
L
H2
φA
1
SegmentV-notch designoptimizing the �owcharacteristicsand providinga shearing function.
Inherent Flow Characteristics
Cv Values
Inherent Flow Characteristics
Cv Values
The Double Offset Geometry
1st OffsetThe centerline of the stem is moved behind the seat axis, in order to offer an optimum sealing contact.
2nd OffsetThe centerline of the disc is offset from the centerline of the valve body, allowing the disc seal to move away freely during the opening.
0.010.020.040.060.100.150.230.38
0.521.061.682.794.546.57
10.2016.70
1.663.355.308.80
14.3020.7032.1052.70
3.446.95
11.0010.2329.6743.0066.64
109.30
5.8711.8518.7531.1050.6273.30
113.70186.50
9.1118.3829.1040.2678.50
113.70176.40289.50
13.3626.9642.6770.78
115.20166.80258.70424.54
18.8338.0060.1299.74
162.30235.00360.60598.20
27.5455.5587.90
145.86237.40343.70533.00874.80
40.5081.70
129.30214.50349.10505.50784.00
1286.50
Size10
Opening (%)20 30 40 50 60 70 80 90 100
1”1-1/2”2”2-1/2”3”4”5”6”
48
213355
108163260290
6580
100125150200250300350
613335288
172260416465
11245792
155301455728815
163482
131221430650
10401160
2247
115183309602910
14561625
2655
135216365710
107317161915
4289
217347586
1140172327563074
60126308491829
1613243839004350
74155377603
10171978299047845336
80168410655
11052150325052005800
Size10
Opening (%)20 30 40 50 60 70 80 90 100
2-1/2” 3” 4” 5” 6” 8”10”12”14”
Opening (%)
Cv
(%)
100
90
80
70
60
50
40
30
20
10
00 10 20 30 40 50 60 70 80 90 100
Opening (%)
Max
imum
Cv
(%)
100
90
80
70
60
50
40
30
20
10
00 10 20 30 40 50 60 70 80 90 100
(*7) Not in ISA standard
5 6