retractable, dust-free loading spouts - sly inc · retractable, dust-free loading spouts. ......
TRANSCRIPT
The entire RoadStar® 18shroud assembly is builtto hang tough, evenunder extreme conditions.The shroud remains flexible in temperaturesranging from -40°F to+180°F. It resists abrasion, aging due toozone and ultra-violetrays, and degradationfrom chemical attack.Optional Hypalon® shroudmaterial is available.
Easy To UseSpout movement is
controlled by a rotarylimit switch which auto-matically senses andresponds to “Full Up” and“Fully Extended” spoutpositions. This featureprotects the hoist drivemechanism.
steel as well as in 304 and316 stainless steel.
Integral Dust FilterAny Sly spout may be
integrally assembled to a Sly“IDF” filter. This self-contained dust filter includes a bag cleaning system and exhaust fan.Fugitive dust generated during product loading isventilated through the spoutand into the filter where it isrecycled back into the material flow.
Raised Face Inlet FlangeANSI drilled inlet
flanges are available for allSly spouts.
Operator’s ControlPendant
Momentary contact “Up” and “Down” push buttons and an on/off selector switch to activate aproduct feed device arehoused in a N.E.M.A.-4Xenclosure with 12 feet of cable.
Slack-Cable LimitSwitches
For hatched truck andrailcar filling with “PV”series loading spouts, contact with the hatch causes the hoist cables tobecome slack. These normally open switches disengage the motor anddrive, prohibiting furtherunwinding of the cables.
Level SensorsA level sensor extends
into the container beingfilled. When the productreaches the level sensor, aswitch is activated to generate a signal to theoperator, or to automaticallystop material flow.
Negative Air ControlSwitch
This switch activates thenegative air system when thespout is extended and turnsthe system off when the spout is retracted to the “Full-Up” position.
Hatch Adaptor KitsHatch adaptor kits are
designed to seal the loadingspout into square, or slottedrail car hatches. These kits are easy to install withouttools.
Explosion-ProofComponents
These explosion-proofelectrical and pneumatic controls are designed for usein hazardous areas such aschemical plants or grain elevators. Anti-static devicesmay be installed to dissipatestatic electricity.
Options ForSpecializedEfficiencySpout Positioners
Pendant-controlled, singleand dual direction spout positioners allow the operatorto easily position the spout forloading. The spout positioner is extremely useful for loadinga variety of railroad cars, suchas offset and center domehatches. The positioner is alsoeffective for loading opentrucks with centerline ridgepoles and for ease in spottingtrucks and rail cars.
Construction MaterialsFor extra tough applica-
tions, Sly loading spouts areavailable in abrasion-resistant
Whether you’re loadingor stacking, Sly makes aspout that will handle anydry material you need tomove. Sly spouts are idealfor radial stacking or loading into railroad cars,trucks, ships, barges, containers and barrels. Sly
loading spouts let you move
powdered chemicals, cements, grain products, sand, gravel, coal or any other dry bulk material— without dust.
Internal StackingCones Give MaximumFlexibility, MaximumClearance
Sly spouts make clearance problems a thing
of the past. Internal stacking cones telescopefor maximum flexibilitywhen loading, and maximum clearance when not in use.
Standard cones are5/16" seamless moldedpolyethylene. Optional3/16" abrasion-resistantsteel, or 304/316 stainlesssteel cones are available.
Tough Spouts forTough Jobs
Sly spouts are built totake it - because we knowhow tough your job canget. You’ll find heavy dutyconstruction, fullyenclosed electricals,durable 3 phase 60 HZ,230/460 volt drive motor,RoadStar® 18 shroud, andmany other design features which make it
clear that obsolescence isnot a part of the plan atSly.
Fully EnclosedElectricals
All electricals are fully enclosed to ensurelong life and safe opera-tion. A “Full Up” and“Fully Extended” rotarylimit switch is a standardfeature on all motorizedmodels. A rugged controlpendant housed in aN.E.M.A. 4x enclosureand slack cable limitswitches are available.
Durable RoadStar® 18Shroud Controls Dust
To control dust, allSly spouts feature thedurable RoadStar® 18shroud. Fugitive dustremains inside theshroud and is pulled backinto the product flow bynegative air pressure.
Inner-sewn ringscause the shroud to foldinward as the spoutretracts, ensuring maximum clearance inthe retracted position.
Load or Stack AnyDry Material –Without Dust
RoadStar® is a registered trademark of Dickson Alberton MillsHypalon is a registered trademark of E.I. Du Pont deNemours & Co., Inc.
Negative Air Outlet
Product Flow
Shown withOptionalEZviewPorts–WhichMake LoadingCleaner, MoreEfficient
Sly Incorporated represents more than 134years of experience indesign and manufacturing.With the most modernresearch and engineeringrefinements, Sly producesquality-built, trouble-freeLoading Spouts. They areunexcelled for reliable andheavy duty performance -even in the most demand-ing applications.
Shipped ready toinstall, Sly Loading Spoutsprovide excellent productflow and clean handling, aswell as reduced productloss, operating costs andmaintenance expenses.
Spouts may be orderedwith a full line of supportequipment and back-upengineering service forcustom applications. Avariety of mounting
configurations and productcontact materials are available to fit each applica-tion, including stainlesssteel parts for use withfoods or corrosive products.
Retractable internalstacking cones reducespout wear and dusting bymaintaining straight product flow through thespout. The cones achievethis desired flow pattern bybreaking up swirling aircurrents which, unchecked,would draw product intothe negative air stream.
Telescoping InternalStacking Cones AllowMinimum RetractedHeight
Negative Air PressureWithdraws FugitiveDust Particles
OptionalControlPendant
OptionalProductLevel Sensor
“EZview” is a registered trademark of Sly Inc., U.S. Patent No. 4,557,364.
Optional “EZview”® Viewing Ports Reduce Waste Due To Overfilling
“EZview”® Viewing PortsAll “XP” series spouts can be supplied with Sly’s patented “EZview”conical lower weldment. This feature allows visual monitoring of the filling process and sampling without having to raise the spout.
Dual-Purpose SpoutThe dual-purpose spout is
designed for loading bothhatched top or open-style railcars and trucks. The dual-purpose spout comes withdual function controls andopen-stacking neoprene skirt.
Additional OptionsAlso available are Sly Inc.
dust collectors, viewing collarlighting and many other usefulaccessories. For more information, contact our salesdepartment.
Finger-Tip Controls make iteasy to extend and retractspout.
Level Sensor controls loadingspout movement as pile isbeing formed.
The Details ThatMake The Difference
8300 Dow Circle, Strongsville, OH 441361-800-334-2957(440) 891-3200
Fax: (440) 891-3210Web: www.slyinc.com
E-mail: [email protected]
Anti-Plugging Sensoreliminates productback-up into spout.
Internal Stacking Conesprovide maximum overlapfor maximum clearancewhen retracted. Eachpolyethylene cone has a2" wide steel belt towhich cables areattached.
• “EZview”® Ports Available to PreventSpillage and ProductLoss (Open StackingModel Shown).
• Fully EnclosedElectricals for Long Lifeand Safe Operation.
• Job-Tested to EnsureReliable Performance.
• Back-Up Engineering forCustom Applications.
• Spouts Can Be Vented toa Sly Dust Collector.
• All loaders are shippedcompletely assembled.
• Sly Inc. keeps a completeinventory of replacementparts on hand at all timesto help you maintainyour equipment withoutcostly down-time.
DOING OUR PARTPrinted on recycled paper.
Catalog SS-102BEZview is a registered trademark of Sly, Inc.©Copyright 2009 Sly, Inc.Printed in U.S.A.
Durable RoadStar® 18 Shroudresists wear from abrasionand corrosion, resists oiland flame propagation, staysflexible in temperatureextremes from 40°F belowzero to 180°F above.
Spout Selector Guide
Recommended Usage
Pails, boxes, 55 gallon drums, flexiblebulk containers, tote bins, someenclosed trucks and railcars.
Pails, boxes, drains, flexible bulk containers, tote bins,trucks and railcars.
Truck, rail car, tote bin, flexible bulkcontainers, carton, drum.
Spout
“Model T” (Hand Crank)Manually OperatedSaves money, offers flexibility. Same perfor-mance as our PV-8 but eliminates the motor.
LP-8, LP-10Low Profile Spout For Tight SpacesLow profile spout has a retracted height ofonly 20" with a 36" vertical travel...greatfor close quarter loading or retrofits.
PV And XPStandard SpoutThe best value spout for most uses. Has internal stacking cones to direct material flow.When used with a negative pressuredust collection system, it is truly dust-free.
PV And XP, OS SeriesOpen Stacking SpoutComes standard with product level sensors andcontrol circuits to maintain contact betweendust skirt and material pile being formed.
Open stacking, open rail cars,open trucks.
8300 Dow Circle Strongsville, OH 44136
(440) 891-3200 • Fax: (440) 891-32101-800-334-2957 • Web: www.slyinc.com
E-mail: [email protected]
General Specifications
The following information is provided todemonstrate the widerange of dimensions andcapacities available in SlyLoading Spouts.
Recommended Neg. Air
(x 100 CFM)**
3.5-5
3.5-5
3.5-5
7-10
5-8
7-10
5-8
8-10
7-10
10-12
9-12
12-15
**These values are recommendations onlyand are sufficient for most loading applications.EZview® lower weldmentmay require increasednegative air.
Sly keeps a completeinventory of replacementparts on hand at all timesto help you maintain yourequipment without costlydown-time. Call 1-800-334-2957.
†These “Performance& Value” spouts are available with limitedoptions for expediteddelivery and economy. Alloperating specificationsremain the same.
*Flow Rates are approximate and based onfree-flowing materials.These rates will vary inrelation to associatedperipheral equipment (i.e.valves, conveyors, etc.) and individual productcharacteristics and classification.
Model No.
Model T-8
Model T-10
LP-8
LP-10
PV-8†
PV-10†
XP-8
XP-8 O.S.
XP-10
XP-10 O.S.
XP-12
XP-12 O.S.
Max. LoadingCapacity (CFM)*
200
300
200
300
200
300
200
200
300
300
400
400
Max. VerticalTravel (Ft.)
14
15
4
4
14
15
14
14
15
15
20
20
Max.Flush InletDia. (In.)
8
10
12
12
16
16
16
16
16
16
18
18
Outlet
To Suit
To Suit
To Suit
To Suit
Conical
Conical
Conical
Skirt
Conical
Skirt
Conical
Skirt
Negative AirConnection
6
8
4
6
6
8
6
6
8
8
10
10
Hoist Drive
Manual
Manual
Air Cylinder
Air Cylinder
1/2HP
1/2HP
1/2HP
1/2HP
1/2HP
1/2HP
1 - 1-1/2HP
1 - 1-1/2HP
Upon request, our salesdepartment will offerequipment recommenda-tions to accomodate anyapplication.